Instructions:

Finished card size is 5 x 7". Cut bottom left of light blue patterned paper from Home for the Holidays paper collection (sheet 2B) to 4 1/2 x 6 1/2" size. Lightly sponge the edges of panel with Forget-Me-Not ink. Use from the HCD2-7363 Holiday Snowflake Frame Die to diecut an opening in the center of blue panel at a slight angle as shown. Use from the same die to diecut two of the snowflake borders from white cardstock. Layer the two borders on top of each other for sturdiness and dimension. Attach these around the opening of blue panel. Use from same die set again to diecut three of the largest snowflake panel from white cardstock. Apply some Dries Clear glue onto a hydra sponge and dab over snowflake frame, blue panel and edges of two of the large snowflake panels, sprinkle with Frosting Powder and then heat set. Cut a piece of white cardstock to 4 1/4 x 6" size, temporarily lay it at the center underneath blue panel. Stamp the Merry Christmas sentiment in Vermillion ink through the opening onto the top center as pictured. Lightly sponge around the sentiment with Forget-Me-Not ink. Dab over with Dries Clear glue and sprinkle with Frosting powder. Cut a piece of clear cardstock to 5 1/2 x 4" and attach behind the opening of blue panel. Add a 1/4" thickness of strip adhesive all the way around the backside of panel, forming a closed rectangle. This is to contain the shaker elements of the card.

Stamp the winter scene with truck and deer, twice from the HCPC-3961 Home for the Holidays stamp set in Jet Black ink onto Deluxe flower shaping cardstock and diecut with coordinating die. For the one image, diecut the outline of scene, and the second one diecut the truck only. Stamp the trees twice from HCPC-3960 Holiday Village Cling Stamp Set in Library Green ink onto the same cardstock and diecut with coordinating die. Using from the HCD2-7371 Letters & Numbers Die, diecut the small alphabet twice from the light blue paper, sheet 2B in the paper collection. Using from the HCD2-7363 Holiday Snowflake Frame Die, diecut both of the snowflakes from white cardstock.

Use the Zig Markers along with blender to color the winter scene and truck. For the trees on truck and around the barn, use the markers Pale Green, Mid Green and Light Green. For the barn, deer and wood rails on truck, use Natural Beige, Beige and Brown. One the trim, windows and wheels of truck use Light Gray and Black. Use Natural Beige on the truck lights and as base color for body of truck. Use Carmine Red on body of truck. Use Carnation red ink with dauber to finish off the color. Use green and red markers on the wreath. Use the Carmine Red, Cobalt Blue and Light Green on the string lights. Sponge the trees with Leaf Green and Vivid Chartreuse ink. Use the shaping stylus from Deluxe Flower Shaping kit to shape the trees, and truck.

Use a pop stick to add a layer of snow over the winter scene. Sprinkle the snow with Frosting powder. Use the Dries White glue in patches on all the trees and sprinkle with Crystal glitter. Layer the winter scene onto the ‘Merry Christmas’ panel as shown. Attach the ‘Merry Christmas panel onto one of the large glittered white snowflake panels. Sponge both snowflakes with Dries Clear glue and sprinkle with Frosting powder. Lay one of the snowflakes onto the card panel. Pour about a teaspoon of Frosting powder onto the card panel. Now attach the blue snowflake panel onto card panel, making sure edges are completely sealed and no glitter can escape. Now you have a shaker card.

Use the pop stick again to add texture paste to card front as shown. Sprinkle the snow with Frosting powder. Use glue and dimensional adhesive to attach truck and trees to card as pictured. Score the large unglittered snowflake panel at the 1" and 3 3/4". Attach the 1" section to the top of glittered snowflake panel to create card base. Attach card panel to the bottom section of fold, creating a fold up card. Lightly sponge the words, ‘let it snow’, with Forget-Me-Not ink. Attach sections of the snowflake and letters onto the inside of card. Lightly sponge around the letters with the same ink. Lightly dab with Dries Clear glue and sprinkle with Frosting powder.

Other Products: White Cardstock, dimensional adhesive strips and dots, popstick, funnel tray, scissors, paper trimmer, diecutting machine

Instructions:

My finished card is 5 1/4" x 7 1/4". Make card base and cover with Sheet 12B of the paper Collection.

Cut the Snowflake Frame Base using Luxe Silver Cardstock. Adhere to card front using dimensional tape. Using white cardstock cut the next size down of the Frame and add Crystal Clear glitter. When dry glue to the card base.

Using two of the Booklet Basics Dies and cut using Sheet 12B of the paper collection. This will create a frame for the Shaker feature of the card. Cut a piece of clear cardstock to fit behind the blue frame and glue together. Add the adhesive foam strips to the back of the frame and then fill with prills and sequins. Cut a piece of Sheet 7B of the paper collection to make a back for the shaker feature then glue all pieces together and glue to the card front.

Stamp the Holiday Village scene onto white cardstock using Memento Rich Cocoa and then color everything with the Prismacolor colored pencils. This is where you can decide on what colors you like and color to suit yourself. I die cut the scene and then added the dries white glue to make the snow. Sprinkle transparent glitter over the snow to make it sparkle. I colored the two girls and cut them out and glued them to the front of the church. I think this makes a perfect scene for the winter festivities.

The card is finished.

Other Products: Tumbled Glass Distress Ink, Prismacolor pencils: PC1074 French Gray, PC1051 Warm Gray, PC903 True Blue, PC908 Dark Green, PC911 Olive Green, PC924 Crimson Red, PC948 Sepia,Crayola Pencils: Tan, Golden Yellow, Blending Stumps, Odorless Mineral Spirits, White Cardstock, Dimensional Tape, Blue and Silver Sequins, Die Cut Machine

Instructions:

Card size: 6 x 6” when closed. Start with 6 x 9” white cardstock and 6 x 9” decorative paper. Mark 3” and 4 1/2" vertical light pencil lines on both pieces. On the decorative paper draw another light pencil line horizontally at 3”. Place the Eyelet Rectangle measuring 3 1/2 x 4 1/2" right in the center of the 2 intersecting lines on the decorative paper and cut, leave the die in place. Place the decorative paper on the cardstock and line up all edges. You should be able to see the vertical pencil lines through the die cut hole, now place the top cutting plate to the firsr vertical line (at 3”) and cut (the die will only cut where the cutting plate was). If you cut cutting side up normally, switch your plates around so that you can cut blade side down to see the lines you’ve drawn…it will be ok, don’t worry. Now turn the cardstock/paper 180 degrees and place the cutting plate at the other vertical line then cut. You should now have 2 partial cuts with 1 1/2" uncut between on the cardstock. Erase all lines on cardstock then score to the cut lines only, top and bottom at 3” and 4 1/2", fold mountain and valley on score lines (Do not score or fold through die cut). The card will now swing around when opened. For the decorative paper, trim 1/16” off top and bottom then trim off both sides of each vertical pencil line, erase horizontal pencil line. Glue each decorative paper piece to the corresponding cardstock panel (except rectangle cut out).

Die cut 1 of the sentiments printed on the decorative paper with a 2 x 3” rectangle then cut an Eyelet mat for it from white, sponge the edges with Jade. Sponge the edges of white swinging die cut with Jade as well. Glue the sentiment and mat to the right side of card (make sure it doesn’t show when the card is closed).

Stamp both truck scenes twice using black ink, die cut both full scenes and trucks, snowman and deer pieces from the second stamped set. Color all with alcohol inks or preferred coloring method (if using alcohol inks make sure to use Memento ink to stamp, if using water based coloring then stamp with Archival or VersaFine Claire). Glue the front of truck scene to the partial cut rectangle when card is closed. Glue the back of truck scene when card is open. Pop up all accessory pieces die cut. Use Dries white Adhesive and UltraFine Crystal Transparent glitter on the snowy parts especially trees and fence. Use glitter pens and paint pens on the little Christmas lights.

Stamp using VersaMark, the smallest poinsettias, emboss with white, die cut, shape then glue 2 together for each flower. Add Seas The Day Prills to the centers. Stamp leaves and sprays using Fern Green then sponge with Leaf Green, die cut, shape. Glue leaves and flowers to the top and bottom of the right side and to the top of the left side. Glitter flowers with sponge applied adhesive and Rajni's Crystal Clear, brush lacquer and shimmer mix to all the leaves.

Other Products: White cardstock, Copic Markers: BG10, BG11, BG32, YR65, YR18, E08 R24, E31, E33, E35, Y11, R43, E42, E43, E44, YG63, YG67, C2, C3, C5, VersaMark, Acrylic Shimmer Additive, glitter pens, paint pens-yellow, red, green and blue.

Instructions:

Die cut the largest Snowflake frame die using pale green paper from the collection and adhere to the card 5.25" x 7.5" base.

Die cut the second 2 size frames using luxe silver card to create a delicate silver frame and adhere onto the centre of the card base. Cut a paper using the 3rd size die and adhere onto the silver frame.

Stamp 2 of the Holiday Village using versafine clair onto stamping card and clear heat emboss. Colour using watered down zig marker (lemon yellow, oatmeal, deep green, carmine red, deep blue), and die cut. Colour the smaller image of the church and tree on the 2nd image and diecut – layer/decoupage onto the larger image using foam pads.

Position onto the card base using foam pads. Add dries white adhesive to the snow areas and cover with art glitter, remove excess and allow to dry.

Make the flowers: Stamp poinsettias onto flower shaping paper using expresso truffle, diecut. Add summer sky ink to the edges, place face down into the mold and run through the diecutting machine to shape.

Stamp the swirls using versa mark, cover with embossing glitter, remove excess and heat to set. Diecut and shape using flower shaping tools.

Position the flowers and swirls onto the card and secure with hot glue. Add hot glue to the centre of the flowers and cover with prills. Remove excess. Add a thin line of dries clear adhesive to the the petals of the flowers and sprinkle with art glitter.

Stamp the sentiment onto vellum using versafine clair, cover with clear embossing powder, remove excess and heat to set. Cut the sentiment to a thin strip and secure with dries clear glue underneath the church and flowers.

Other Products: hot glue, versafine clair - black, under the sea embossing glitter - WOW, clear embossing powder, foam pads, 5.25" x 7.25" white tent fold card base, white card

Instructions:

From the white cardstock, cut the outer frame from the HCD2-7363 Holiday Snowflake Frame Die set, the smaller one and its outline. Drag the horizontal fold line slightly above the center, dividing the frame in half. Divide the upper part in half again. Fold to form the base of the easel card. Also cut snowflakes from the set.

From the right corner of sheet 7B of the HCDP1-2130 Home for the Holidays Paper Collection, cut a full smaller frame. Place a white layer under the blue layer to hide the pattern on the other side. Adhere an outline on top.

Stamp the images on a white cardstock: 1x church, 2x Christmas trees from the HCPC-3960 Holiday Village set and the sentiment included in the set. Use the  Jet Black color. Cut with matching dies.

Also, stamp selected elements from the HCPC-3921 Festive Winterscape set in the form of children and a lantern. Cut with matching dies. Paint with watercolor paints. Apply a layer of white paint to the selected places imitating snow.

Create a scene as shown. Adhere all the elements using glue, foam strips and 3D foam circles. Attach to the base as shown using glue to form a full easel card.

Cut out the sentiment and place it on the bottom of the base as shown. Sprinkle the glitter on the selected places, quickly applying a little glue. Attach the snowflakes on the top and bottom as shown.

Other Products: White paint, watercolor paints, brush, trimmer, cutting machine

Instructions:

Create a 5 x 7 inch card base. Cut a 4.5 x 6.5" piece of white cardstock, distress with Seafarer ink and Jet Black around the edges and adhere to card front, cut a slightly smaller piece of blue paper from the Home for the Holidays Paper Collection, distress with Seafarer and adhere to card front. Cut out the Holiday Snowflake Frame Die in white card stock, cut in half and adhere one half to top and bottom as seen in photo. Cut out a piece of tree paper from the paper collection 3.5 x 5.5", distress with Garden Patina and adhere with foam tape to a piece of white cardstock cut slightly larger, adhere this to a piece of white cardstock distress with Wayfarer and Jet Black cut slightly larger than the white mat. Adhere to center of card.

Heat emboss tree scene with the Home for the Holidays Cling Stamp Set in black on Bristol Smooth card stock twice, water color one completely with Zig markers and the other, watercolor the truck and snowman on the other, cut out the snowman and truck with coordinating dies and cut out the complete scene on the other, adhere truck and snowman with foam tape for dimension.

Heat emboss the trees from the Holiday Village Cling Stamp Set in black on Bristol Smooth cardstock twice, water color with Zig markers and cut out with coordinating dies

Cut two snowflakes with the Holiday Snowflake Frame Die in Luxe Silver Cardstock.

Cut out the sentiment from the Home for the Holidays Paper Collection and distress with Seafarer ink.

Adhere the snowflakes and sentiment, and then with foam tape, adhere the scene as shown. Adhere three trees to the right of the scene with two layers of foam tape.

Stamp the flourish from the Holly Berry Spray Cling Stamp Set in Olive Green, cut out with coordinating dies and sculpt with stylus.

Stamp the Large and Small Festive Poinsettia Cling Stamp Sets in Carnation Red, cut out with coordinating dies and sculpt with the Large and Small 3D Festive Poinsettia Shaping Molds and add stamens and glitter.

Adhere flourish and poinsettia as pictured.

Other Products: Embossing Ink pad, black embossing powder, Bristol Smooth Cardstock, heat gun

Instructions:

Stamp the scene image from Home for the Holidays Cling Stamp Set on a 4" x 5 1/4" piece of Deluxe Flower Shaping Paper using Jet Black Archival Ink. Color it using pencil colors and lightly apply Salty Ocean Distress ink on the sky area. Apply Designer Dries White Adhesive on the snow and sprinkle shimmer dust. Apply 3-D Crystal Lacquer on parts of truck like windows, wheels etc. Apply Dandelion Yellow, Caribbean Ocean and Autumn Red Nuvo Crystal Drops to the fairy lights and headlights. Adhere it on a 4 1/4" x 5 1/2" pattern paper from Home for the Holidays Paper Collection. Adhere it on a 5 1/2" x 5 1/2" white card base as shown.

Die cut a piece of white cardstock using the die from Palace Gateway Die and trim it to make a border. Ink it with Candied Apple Distress ink and adhere as shown. Glue a thin strip of Luxe Gold Cardstock near the right edge of the card.

Die cut the alphabets and show flake from Luxe Gold Cardstock using the dies from Holiday Snowflake Frame Die and Letters & Numbers Die. Adhere the alphabet dies on a piece of vellum to spell 'Merry Christmas', trim and adhere it on the card as shown. Cut the snowflake in half and adhere it on top and bottom of the sentiment.

Glue few rhinestones on the snowflakes to add the finishing touch.

Other Products: Candied Apple and Salty Ocean Distress inks, Oval makeup brush, pencil colors, Get Inspired Vellum CraftTangles shimmer dust, double sided foam tape and rhinestones.

Instructions:

Adhere Home for the Holidays Paper Collection sheet 7B onto white cardstock 5 x 7”. Die-cut a Snowflake Frame aperture and trim with Home for the Holidays 10B edged with Seafarer. Cut a further 3x white cardstock same size and aperture. Cut white cardstock 5 x 7” and cover one side with Home for the Holidays 7B.

Cut 2x white cardstock 6 x 7” lay portrait in Scor-Pal and score every 3/4”. Crease forward/backward (concertina). Lay the sides onto craft mat with the top open valley pointing inward toward each other (photos on my blog to help).

Adhere the front aperture panel onto the first tabs. Adhere a white aperture panel into the next valley fold and repeat for all 3 white aperture panels. The back panel should sit inside the last valley fold with the paper collection image showing forward. To hide the tab behind the back cover, cut 5 x 7” Home for the Holidays 10B and adhere over.

Onto the back, adhere Snowflake largest frame in Home for the Holidays 5B. Die-cut the middle-sized Snowflake Frame in Home for the Holidays 6A adhere on dots. Die-cut the smallest Snowflake Frame in 10B and edge with Luxe Silver cardstock adhere on dots. Die-cut smallest Letters and Numbers in Luxe Silver cardstock. (Tip: arrange letters on the grid of your mat facing up, adhere low tack tape over to transfer onto the card).

Stamp in Versafine Grey onto white cardstock Holiday Village and Home for the Holidays stamps, colour with Nuvo watercolour pencils and die-cut using coordinating dies. Use Dries white and glitter to highlight snow on the images and white gel pen on the deer backs. Adhere die-cuts to the white aperture frames. Position the Holiday Village higher so all the images can be seen creating dimension of the scene. The snowman is on a dot.

Stamp Holly Berry Spray solid leaves in Versamark onto Home for the Holidays Paper Collection 6A and silver heat emboss. Stamp Small/Large Festive Poinsettia in Library Green onto Deluxe Flower Shaping Paper. Colour with Viridian and edge with Seafarer. Lay face down in 3D Small/Large Festive Poinsettia Molds, spritz and run through die-cutting machine. The flower is made up of 2 petals of larger flower and 2 petals of smaller flower. Thread Medium Bead Stamens through the smaller petals, secure with hot glue and trim off excess. Adhere with hot glue to the larger petals. Add Dries Clear and Glass Shards.

Die-cut 2x Sweetheart Border and 1 Elegant Pocket Accent in Home for the Holidays 10B edged with Seafarer.

Die-cut snowflakes in white cardstock, add dries clear and glitter. Adhere flower and holly with hot glue. Adhere the snowflakes, village accents on dots and dries clear.

Other Products: silver heat embossing, white gel pen, trimmer/scissors, hot glue, grey versafine, Nuvo watercolour pencils

Instructions:

Onto A5 card blank mat and layer Luxe Silver cardstock and Home for the Holidays 5B to fit. Cut a smaller mat and layer in Luxe Silver and Home for the Holidays 6A 5 1/4 x 7 3/4”. Die-cut in Luxe Silver cardstock the largest Holiday Snowflake Frame and adhere with dots. With trimmer/scissors cut the decorative panel from Home for the Holidays 3A and mat and layer with Luxe Silver cardstock. Adhere to the inside of the card over 6A edged in Seafarer. Stamp in the centre the sentiment from Holiday Village Cling Stamp Set 'Have a very Merry Christmas' in Seafarer.

Stamp in Versafine Grey onto white cardstock Holiday Village and Home for the Holidays, colour with Nuvo watercolour pencils and die-cut using coordinating dies. Use Dries white and glitter to highlight snow on the images and white gel pen on the deer backs.

Die-cut Holiday Snowflake Frame Die from Home for the Holidays 10B and Luxe Silver cardstock around the aperture. Adhere die-cuts Home for the Holidays and Holiday Village behind the aperture. Adhere Clear cardstock to the back of the frame to cover the images and aperture. Adhere white foam strips onto the back Clear cardstock around the aperture then lay a piece of paper over the foam strips to hold the silver sequins inside. Adhere onto the card blank on dots off-set to the existing silver frame.

Stamp Holly Berry Spray solid leaves in Versamark onto Home for the Holidays Paper Collection 6A and silver heat emboss. Stamp Small/Large Festive Poinsettia in Library Green onto Deluxe Flower Shaping Paper. Colour with Viridian and edge with Seafarer. Lay face down in 3D Small/Large Festive Poinsettia Molds, spritz and run through die-cutting machine. Each flower is made up of 2 petals of larger flower and 2 petals of smaller flower. Thread Medium Bead Stamens through the smaller petals of each flower, secure with hot glue and trim off excess. Adhere with hot glue to the larger petals. Add Dries Clear and Glass Shards.

Die-cut snowflakes in white cardstock, add dries clear and glitter, add with hot glue.

Other Products: Versafine grey, hot glue, paper trimmer/scissors, silver sequins, white gel pen, Nuvo watercolour pencils, silver heat embossing powder, versamark

Instructions:

Card size with Flowers and Snowflakes is 8 x 6”. Cut white cardstock 7 x 10” score and fold at 5” on the long side to create a 7 x 5” top fold card base. Cut Home for the Holidays paper sheet 6A 2x to 6 7/8 x 5 7/8”. Cut one piece from the top right and the other from the bottom right that includes the beautiful scene with the truck. Ink the edges using Archival Olive ink and adhere the one with the scene on the inside of card and the plain green one on the card front, using dries clear adhesive. Using Jet Black ink, stamp the ‘Have a very Merry Christmas!’ Sentiment from the Holiday Village Cling Stamp set on the inside.

Create a 5 x 5” shadow box. Score a 7 x 11 1/2” piece of Deluxe Flower Shaping Paper on the short side at 1/2”, 1”, 6” and 6 1/2”. Score the long side at 1/2”, 1”, 6” and 6 1/2”. Trim the right top and bottom score lines off up to the first vertical score line, using scissors to cut tabs. (See sample on my blog.) Use the Cut Mat Create Die to cut the aperture in the front of the box. Cut paper from the paper collection sheet 5A x1 4 7/8 x 4 7 /8”, x4 3/8 x 4 7/8” and ink the edges with Olive ink. Use the Cut Mat Create 2A die to cut the aperture in the 4 7/8 x 4 7/8” pieces for the front of the shadow box. Adhere the papers to the box using dries clear adhesive prior to assembling. Cut 4 7/8 x 4 7/8” from the paper collection sheet 2B and adhere to the inside of the box. Finish folding at all score lines and adhere to form the shadow box.

Stamp the Holiday Village scene 2x, the woman and child and the trees 1x on Strathmore Bristol Vellum Cardstock using Jet Black Archival ink. Color everything except the church on one scene and just the church on the second scene using Zig Clean Color Real Brush Markers Carmine Red, Wine Red, Yellow, May Green, Deep Green, Cornflower Blue, Light Blue and Beige. Diecut the whole scene and then just the church using coordinating dies. Diecut the whole scene one more time from deluxe flower shaping paper and adhere the two together. Diecut the church 4 more times and adhere all diecuts together to create dimension. Adhere the church to the rest of the scene. Diecut the woman and child and the trees 2x and adhere them to together, Cut the trees apart. Spritz all the diecuts with Sheer Shimmer Craft Spray-Sparkle and let dry. To create the snow effect, adhere dries white glue and Rajni Chawla’s Frosting Powder. Adhere the scene inside the box and adhere the woman and child and one tree to the outside of the box using dimensional squares.

Diecut the large snowflake from the Holiday Snowflake Frame Die 10x and a small snowflake 2x from white cardstock. Double three of the snowflakes to make them thicker and adhere the small snowflakes together. Sponge all the snowflakes with dries clear adhesive and sprinkle with Ultrafine Transparent Glitter. When dry, adhere the doubled snowflakes to the back of the top of the shadow box. Adhere the single large snowflakes to the bottom of the right side of the shadow box. Diecut two large tags using the Ticket and Tags dies from white cardstock and the inside tags from designer paper and ink the edges. Adhere the tags together and punch holes in the tops using Crop-A-Dile and add red silk cord. Cut the tags down at the bottom and adhere to the right side of the card front. Adhere the shadow box to the left side of the card front.

Diecut a small tag from sheet 5A of the paper collection and again from white cardstock. Adhere the two together and ink the edges using Archival Olive ink. Diecut from Luxe Gold Cardstock the ‘2021’ using the small numbers from the Letters & Numbers Die and adhere to the tag using dries clear adhesive. Use the Mini Laser Square to line up the numbers and place them using the QuickStik. Adhere the tag to the top of the shadow box and adhere the small snowflake to the right side of the box above the tree.

Stamp the small poinsettias from the Large Festive Poinsettia Cling Stamp set 3x on red pearl metallic cardstock using Archival Red Geranium ink, diecut using coordinating die and shape using the Large 3D Festive Poinsettia Shaping Mold and the Deluxe Flower Shaping Kit. Adhere two flowers together making sure to offset them and add dries clear adhesive and gold glass shards to the flower centers.

Stamp the Holly Leaves from the Small Festive Poinsettia Cling Stamp set and the leaves from the Holly Berry Cling Stamp Set on green pearl metallic paper using Archival Olive ink and diecut using coordinating dies. Shape the leaves using the Small 3D Festive Poinsettia Shaping Mold and the Deluxe Flower Shaping Kit. Add dries white adhesive to the tips of the poinsettias and leaves and dip them in the transparent ultrafine glitter. Adhere the poinsettias and leaves to the left and bottom of the shadow box as shown using hot glue. Adhere the last snowflake to the left bottom corner in between the poinsettias.

Other Products: White cardstock, Red Pearl Metallic Cardstock, green Pearl Metallic Cardstock, Gold Glass Shards, Red Silk Cord, Strathmore Bristol Vellum Cardstock, Crop-A-Dile, Sheer Shimmer Craft Spray-Sparkle, Dimensional Squares, Mini Laser Square Funnel Tray, Misti.

Instructions:

Make a card base from white card stock. Cut white card stock to size 10” x 7”. Score at 5” on the 10 “ side and fold to make a top folding horizontal card.

Cut a mat layer in Luxe silver card stock, a little smaller than the base card and add to the card front. Cut pattern paper, smaller than the mat silver layer. Distress the edges all around with Rustic Wilderness Distress ink. Adhere this on the mat silver layer.

Cut a die cut in white card stock from the Palace Gateway die. Remove the gates to create a window. Distress the whole die cut piece with a blend of Rustic Wilderness and Peeled Paint distress ink.

Stamp the scene from the Home for Holiday Cling stamp set on water color paper using Archival ink Jet black. Color the image using water color and use the Home for the Holiday die to cut it out. Adhere this piece on the card front in the frame area of the gate. Stamp the lady with girl image from the Holiday Village stamp set on water color paper  with Jet black ink and use water color to add color to the image. Cut with Holiday Village die and add to the scene.

Cut snow flakes in Luxe gold card stock and add to the card. Stamp the small size Poinsettia flower on Deluxe flower shaping paper from the Large Poinsettia cling stamp set using Rose madder ink. Color blending the Rose Madder and Carnation ink. Cut using the matching die and shape and mold the flowers in 3D Large Poinsettia flower shaping mold. Make a hole in the center. Make a bunch of stamens and add to the flower center.

Similarly make leaves using the Large and small Poinsettia cling stamp sets using Library Green ink on deluxe flower shaping paper. Cut with matching die and shape them in 3D flower shaping molds.

Arrange the flowers and leaves on the card. Add a sentiment from the paper collection.

Finish the card by adding sparkling effect on the snowy areas using glitter and stickles.

Other Products: Water colour paper, water colour, brushes, Rustic Wilderness distress ink, Peeled Paint distress ink, sparkling stickles, scoring board, die cutting machine

Instructions:

Finished size of ornament is 4 1/2” wide by 4 1/4” tall by 1/2” deep.

For my ornament I created a small shadow box with chipboard, slightly bigger than the stamped image. You can also use a small box for this step. Pick your favorite image from the patterned paper for the inside scene, cut to fit box, cut coordinating paper for inside and outside of box, glue paper to chipboard and cover all sides of box.

Attach beads with flat head pins to box. Add ribbon to the jingle bells and attach as pictured.

Stamp scene from ‘Home for the Holidays’ set 6 times on white cardstock with black memento ink. Cut all images with coordinating die. Now, depending on how many layers you want to create on the scene, you can just use the dies and cut those images or you can also use scissors and cut apart the scene to layer and create more depth like I did on my project.  Once all pieces are cut, color with color pencils. Layer all pieces to create a dimensional scene as pictured, glue to shadow box with foam dots.

Stamp poinsettias, leaves, branches, cardinals, berries on white cardstock with respective colors, cut with coordinating dies. Color all images and shape.  

Add stamens to poinsettias as pictured. Glue poinsettia, leaves, branches and all other pieces as pictured.  Glue arrangement to shadow box with hot glue, add a couple of branches to back side to cover hot glue. Add frosting powder to scene where desired for sparkle, add frosting powder to edge of shadow box as pictured.

Other Products: Inks: Distress ink (rustic wilderness, mowed lawn, candied apple). Image Colored With: Prismacolor Color Pencils (Periwinckle, Blue Lake, Cool Grey 50%, Black, Light Peach, Peach Beige, Dark Brown, Crimson Red, Tuscan Red, Deco Yellow, Sunburst Yellow, Chartreuse, Dark Green), OMS, Paper: 89lb. AW Curious Iridescent Cryogen White cardstock, Chipboard, Accessories: 3/8” Green Ribbon, Green and red beads, Gold jingle bells, Silver flat head pins, foam dots

Instructions:

Easel card measures - 5” inches by 7” inches. To create the card base - cut out 11" x 7 1/2” piece of HCPP1-438-3 Kraft card and score it at 2 3/4” and 5 1/2” (long side up) to create a card base. Fold using a bone folder along the score lines.
To decorate the inside of the card - Cut out 4 7/8” x 6 7/8” piece of HCGP1-493 Luxe Silver Cardstock and adhere it to the inside of the card. Cut out 4 3/4” z 6 3/4” piece of HCDP1-2130 Home for the Holidays Paper Collection and adhere it inside the card.

Using Ranger Archival Ink Pad - Jet Black, stamp the sentiment from HCPC-3884 Candy Cane Cottage Cling Stamp Set on HCDP1-2130 Home for the Holidays Paper Collection, then die cut it with HCD2-7363 Holiday Snowflake Frame Die and ink the edges with Memento Dye Ink Pad - Olive Grove using HCDA1-449 Daubers. Die cut decorative shape from HCGP1-493 Luxe Silver Cardstock with HCD2-7363 Holiday Snowflake Frame Die, then stack and adhere them together inside of the card using 3D foam (to create easel card stopper).

To decorative front of the card - cut out two 2 5/8” x 7 3/8” pieces of HCGP1-493 Luxe Silver Cardstock and two 2 1/2” x 7 1/4” pieces of HCDP1-2130 Home for the Holidays Paper Collection, then stack and adhere them together on the front of the easel card base.

Die cut one decorative shape from HCDP1-2130 Home for the Holidays Paper Collection and one from HCPP1-438-3 Kraft Card, then stack them together, distress the edges with Memento Dye Ink Pad - Olive Grove using HCDA1-449 Daubers and adhere final piece to the card front using 3D foam. Die cut small decorative frame from HCGP1-493 Luxe Silver Cardstock and small decorative shape both fromb HCDP1-2130 Home for the Holidays Paper Collection and HCPP1-438-3 Kraft Card, then stack them together and adhere final piece to the card front using 3D foam.

Stamp the leaves from HCPC-3959 Holly Berry Spray Cling Stamp Set on HCDP1-2130 Home for the Holidays Paper Collection with Memento Dye Ink Pads: Paris Dusk and Olive Grove, then die cut them using matching HCD1-7360 Holly Berry Spray Die and shape them with HCST1-401 Deluxe Flower Shaping Kit.

Stamp the poinsettia petals from HCPC-3957 Large Festive Poinsettia Cling Stamp Set on HCDP1-2130 Home for the Holidays Paper Collection - with TSMP608 Memento Dye Ink Pad - Paris Dusk, then colour them with the same ink using HCDA1-449 Daubers and die cut with matching HCD1-7358 Large Festive Poinsettia Die. Shape them with HCFB1-5007 Large 3D Festive Poinsettia Shaping Mold. Assemble the poinsettia flowers using a hot glue gun and decorate the flower centre with stamens. Using a sponge add Designer Dries Clear Adhesive to the flower petals and leaves, sprinkle them with Rajni Chawla's Frosting Powder and apply 3D1844 3-D Crystal Lacquer, then adhere flowers and leaves to the card front as shown.

As a final touch, die cut the snowflakes from HCGP1-493 Luxe Silver Cardstock with HCD2-7363 Holiday Snowflake Frame Die and adhere them to the Poinsettia flower and inside of the card as shown.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, Bone folder,

Instructions:

The ready side-fold card measures 8" x 5 1/2". To prepare the card base, cut a white cardstock measuring 8" x 11", score at 5 1/2", fold and crease. Choose the paper from the designer paper collection and cut measuring, 7 1/2" x 5". Mat the paper on the white cardstock, creating a sleek border of 1/16" on all the sides. Layer the panel on the ready card front.

Cut 6 pieces of snowflake frames, two from white cardstock, 2 from red designer paper, and 2 from green designer paper. Mat 2 pieces of each color together using an adhesive that dries clear. Dab the white frame on the Versamark sticky ink and sprinkle Tinsel heat embossing powder. Dust extras and heat set the frame using a heat tool. Crisscross all the three frames as shown and layer them on the card front using tiny foam dots.

Stamp the elements from Holiday Village Cling Stamp Set with black archival ink on smooth white cardstock and cut them using their coordinating dies. Paint all the images using Zig Clean Clear Brush Markers. Layer the images using foam dots to create 3-dimensional effects. Layer the painted village scene on the bottom of the card as shown. Glitter the areas with sparkling glitter that covers snow.

Stamp one large swirly foliage image from Holly Berry Spray Cling Stamp using Fern Green Archival ink and cut it using its coordinating die. Ink the swirl using Leaf green archival ink. Also, stamp cut and ink 2-3 pieces of small foliage from the same stamp. Shape the leaves lightly with a golf groove tool.

To prepare Poinsettias, Stamp 6 pieces of the smallest Poinsettias on Deluxe Flower Shaping Cardstock using Plum archival ink and cut them using their coordinating dies. Next, ink the flowers using Red Geranium and shape the Poinsettias using Golf Groove tools. For Flower centers, stamp with Buttercup, cut the same, and color them with Buttercup ink on both sides, shape them and glue them in the flower centers. Glitter the flowers using Rajni Chawla's Frosting Powder using an adhesive that dries clear.

Once all the elements are ready assemble a small bouquet of poinsettias as shown with the help of hot glue and finish the card using a sentiment strip with Merry Christmas sentiment from the Candlelit Poinsettia stamp set.

Other Products: Smooth White Cardstock, Versamark Clear Ink, Scoreboard, Paper Trimmer, Die Cutting Machine, Sharp Scissors, and Scale

Instructions:

Cut a piece of Deluxe Flower Shaping paper 11” x 7 1/2”, score at 5 1/2" along the long side and fold. Die cut the gatefold shape out using the No. 1 die from the HCD2-7337 Tear Drop Lattice Gateway Die with one side slightly over the folded edge of the card. 

Front of Card: Die cut a piece green pattern paper using the No.1 die from the HCD2-7337 Tear Drop Lattice Gateway Die and adhere to the front of the card around the edge only. Die cut the decorative die from the HCD2-7339 Regal Lattice Gateway Die out of silver cardstock. Using this die as a template, die cut the aperture out using the No. 2 die from the HCD2-7339 Regal Lattice Gateway Die. Adhere the decorative die to the front of the card.

Inside left of card: Cut a piece of clear cardstock slightly larger than the aperture and adhere to the card. Die cut a piece of green pattern paper and using the card front as a template die cut the aperture out and then adhere to the inside left of the card trimming the right had side slightly to allow the card to close. Die cut the eyelet frame out of silver cardstock using the No. 5 and No 6. from the HCD2-7340 Eyelet Frame Gateway Die and adhere around the edge of the aperture as shown.

Inside back of card: Die cut a piece of green pattern paper using the No. 1 die from the HCD2-7337 Tear Drop Lattice Gateway Die set and adhere to the back of the card trimming the left side slightly to allow the card to close. 

Die cut a small scene image from a 6” x 6” panel from the paper collection using the No. 2 die from the HCD2-7339 Regal Lattice Gateway Die set. Using a stamp position stamp the Christmas sentiment from the HCPC-3960 Holiday Village Cling Stamp Set in Obsidian ink and then adhere to the back using the front of the card as a template. Die cut the eyelet frame out of silver cardstock using the No 5 and No 6 from the HCD2-7340 Eyelet Frame Gateway Die and adhere around the shaped paper. 

Stamp the church image from the HCPC-3960 Holiday Village Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut the church out with the coordinating die.  Add glittery snow effects using Dries White glue and Crystal Ultrafine glitter.  When dry adhere over the pattern paper to finish the scene.

Stamp the smaller poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp Set and the HCPC-3958 Small Festive Poinsettia Cling Stamp Set in Mulberry ink on Deluxe Flower Shaping Paper. Colour the centres with Sunflower ink and the petals with Vermillion ink and die cut with the coordinating dies.  Colour the backs of the flowers with Vermillion ink and shape with the coordinating molds. Assemble using two petals of each size and insert yellow bead stamens through the centres. I have used 7 stamens for the larger flowers and 5 stamens for the smaller flowers. To finish the flowers, add Crystal Clear glitter using clear gloss gel medium. Add a large flower to the top left of the front of the card and a small flower to the bottom right as shown.

Stamp the small poinsettia spray from the HCPC-3958 Small Festive Poinsettia Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green and Olive inks and die cut with the coordinating die.  Colour the back of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter to the leaves with clear gloss gel medium.  Add the sprays to each side of the large and small poinsettias as shown.

Stamp the small leaf spray image from the HCPC-3959 Holly Berry Spray Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Adhere the leaf image on the bottom right and down the left side as shown.

To make the berries stamp the smaller poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp Set and the HCPC-3958 Small Festive Poinsettia Cling Stamp Set in Mulberry ink on Deluxe Flower Shaping Paper.  Colour the stamens that come with the flowers with Vermillion ink and die cut with the coordinating die. Shape using the coordinating mold and add Red Berry Nuvo Drops to the images.  When dry add a small splash of Simply White Nuvo Drops to create a highlight.  Add to the bottom right and top left as shown with foam squares.

Other Products: Iris cardstock, Altenew Obsidian Pigment ink, clear gloss gel medium, Nuvo Drops - Red Berry, Nuvo Drops - Simply White, stamp positioner, small foam squares

Instructions:

The finished card measure 6 3/4 x 4 1/2 inches. Cut a piece of white cardstock in deluxe flower shaping paper 6 3/4 x 9 inches and score at 4 1/2 inches to make a  top fold card. Cut a piece of pattern paper 6 1/4 x 4 1/4 inches. Ink the edge with vermillion ink and glue it on your card base.  

Die cut an oval from the Ornate oval die in white paper and another one in pattern paper. Glue them on each other and glue it in the front of the card with 3D foam. With eyelet oval die cut a piece of pattern paper with a nice scene and glue over it.

Stamp your Holiday Village with jet black ink onto white flower shaping paper, color with zig makers and die cut with the coordinate die. Glue it on the oval with 3D foam. 

Die cut a sentiment from the pattern paper with Ornemental tag. Ink the edge with olive ink. Glue it on the card. Stamp in olive ink and cut a swirl from Holly Berry Stamp set on a white cardstock. Paste it on your card under the sentiment.

Add stickles ice on the top of the church.

Other Products: Water mister, hot glue gun, hot glue, scissors, Steadtler watercolor pencils, stickles ice diamond,

Instructions:

Card size: 5 x 7 1/2". Start with folded white cardstock measuring 5 1/2 x 7 1/2" (folded size). Lay outer die of the Holiday Snowflake Frame about 1/2" over the top fold and cut. Cut off the decorative edges (you will cut a new front and a new inside later. And score the top side again in the center (about 2 3/16” from previous score line). Fold the top down toward center fold. This is the base of the easel card.

Cut 2 more outer die frames from white and sponge the edges, including flakes, with Sky Blue Brilliance ink. Glue 1 to the top (match bottom edges and only glue the folded down portion) then glue the other to the card inside, you will have to trim the top of the inside die cut off a little to match bottom and side edges. Cut 5 simple snowflakes and 3 of the more ornate snowflakes from white. Glue snowflakes and pop up some of them along top edge of front and the bottom corners of the inside.

Stamp the truck back image 2 times using black, die cut full image of 1 and die cut the truck only of the second image. Stamp birds using black and die cut. Stamp some Festive Poinsettias (smallest size) at least 6 blossoms using Vermillion then sponge with Carnation Red. Stamp leaves using Fern Green then sponge with Leaf Green, die cut, sponge the backs and form. Form Poinsettias at the same time using the molds. Stamp sentiment using VersaFine Red and emboss with clear powder on white cardstock then die cut with Eyelet Oval and Basics Large. Color images that have not been sponged using Alcohol Markers such as Copic. Only color truck cut separately as the other truck on full image will be covered.

With the outside die of the Royal Gateway cut from gray decorative paper and from foam sheet to pop up. Glue the 2 cuts together then glue them to the center (horizontally) of the front but the bottom should be at the bottom of the card front. Cut the decorative part of the Royale Gateway die from gray decorative paper and from Luxe Silver, glue together offset. Also cut from both silver and gray, a decorative mat for the sentiment using Elaborate Oval Frames Die Set, glue them together offset. For the gate, fold gate open and sponge the back of opened gate with Hickory smoke gray Distress Oxide Ink. 

Glue the full truck/homestead image and a strip of white for the bottom of image to continue the snow look, to the gate frame on the card front, pop up the truck image that was cut separately (use pop-up deminsionals or foam sheet). Now glue the opened gate to the gate frame over image, the truck should be about centered in the open gate. Glue the birds to the top left side of the gate post.

For each poinsettia, glue 2 blossoms together, stagger petals, then insert 5 yellow Beaded Stamen and surround the stamen with yellow Prills.

Find the right place for keeping the card open then glue the popped up sentiment in the center to keep it open. Add poinsettia and leaves as well, they will help keep the card open for display and help keep the gates open to view truck.

Die cut 2021 from Luxe Silver using the small number dies and glue them to the tail-end of the truck. Glitter the flowers with Rajni’s Crystal Clear and glitter the card edges and snow with UltraFine Crystal Transparent glitter. Card can close for mailing but it will be thick because of the flowers.

Other Products: White cardstock, Brilliance Sky Blue, Distress Oxide Hickory Smoke, Distress Mowed Lawn, Copic Markers: R43, R24, R29, Y21, YR24, E31, E33, 35, YG63, YG67, BV10, BV11, BV20, C2, C3, C5, glitter pens, paint pens: yellow, green, blue, pink

Instructions:

This card measures 8 10/16" x 6 1/2". To prepare the card base and fronts do the following: Taking the white card stock, make a tent fold card base to the above measurements. Make a matting, the card front, a little smaller than the base front also from the white card stock. Taking the Holiday Snow Flake Frame, the outer and the next frame in the set die cut the frames from the white card stock. Do this twice each then adhere the layers together. Taking the paper collection sheet 6B and cut this to a size that is a little smaller than the card front. Distress the edges of this paper by using the paper distressing tool. Adhere the card front and the distressed paper to the card base using the 3D double sided foam tape.

Using the Letters & Numbers die set and the white card stock, die cut the words SENDING YOU WINTER FUN. Die cut enough so you will have 5 layers for each letter. Stack and adhere all the letters together to form the words.

Using the hydra sponge and the clear drying adhesive, apply the adhesive to all the letters and the snow flake pattern on the frames. Dip all the elements in the glitter or sprinkle the glitter over the parts with the adhesive on them. Put aside to dry on the tray. When the elements are dry, brush any excess glitter away then replace it back into your glitter container.

Stamp, colour and die cut all the elements used for this card by using the white card stock, the sepia ink, the Misti stamping tool, the scenery stamps from the stamp set, the tree and the people from the other stamp set. There are five extra tree sets stamped for this card. The colours used for these elements are the Spectrum Noir water colour pencils- Pineapple, Aqua, Gravel, Ruby, Claret, Gunmetal, Sky-blue, Bison, Clay, Red berry, Dergano, Cypress, Watermelon.

For the Poinsettia spray used, you will need the following: the white card stock , both the Festive Poinsettia shaping molds, both the Holly Berry Spray and the Large Poinsettia  stamp and die sets. Misti stamping tool, the versa-mark, the gold embossing powder and the heat it tool.  The cluster has, two swirl sprays, two holly leaves and two layers for the one flower, Use the shaping molds and the flower shaping tools to bring the shape to the leaves and flowers. Adhere together in a cluster with the hot glue gun. Once shaped adhere all together in the cluster then apply adhesive with the hydra sponge and the adhesive bottle tip to the tips of the petals, the swirls and tips of the leaves.

Adhere the Holiday Snow Flake frames to the card front with the 3D foam tape. Trim away the lower right snow flake corner, this is used in the poinsettia cluster. Trim away also the snow flake pattern in the frames so the word SENDING can be adhered to the shape of the frame. Adhere this word to the card front. Do the same for the word YOU. Adhere the winter scene to the card front. Adhere all the extra trees, truck, animals and people in place. Adhere the word FUN to the right and under the truck. Adhere the poinsettia cluster to the lower right of the frame, not forgetting to adhere the trimmed snow flake to the cluster. Apply a little of the snow writer to the tops of the trees and the fence

Other Products: Inks: Spectrum Noir water colour pencils- Pineapple, Aqua, Gravel, Ruby, Claret, Gunmetal, Sky-blue, Bison, Clay, Red berry, Dergano, Cypress, Watermelon. Ranger Archival inks: Venation orange, Hot glue gun, Glitter, prick pen, double-sided tape, double sided 3D foam tape, Versa-mark, Deco Art Snow writer, Paper distressing tool, ruler, scissors, Glitter brush, Misti stamping tool, Bead / Glitter tray

Instructions:

Layout is 12 x 12". The background patterned paper has the decorative border at the top of the layout. Next take the light coloured wood grain pattern and cut it into strips along the wood lines. Distress the edges of the pieces of wood, and then 1 by 1 tear the top edge of each piece to go along with the top border pattern. Adhere the strips to the layout using foam tape.

Using the Rounded Window Frame Die, cut 2 pieces from kraft cardstock. One gets cut and adhered to the bottom left hand corner of the layout. The other gets added to the top section of the wood pieces in the middle of the layout. Trim the 4 x 6" photo and mat it in kraft cardstock adding kraft photo corners. Then use the Intricate Swirls Frame die in white cardstock to mat the photo. Adhere the matted photo to the layout using foam tape. Die cut the small snowflakes from the Snowflake Frame Die from white cardstock.

Stamp and die cut 2-3 sets of each poinsettia size using brown ink (Stampin Up- Early Espresso) onto Deluxe Flower Shaping Paper. Stamp and die cut 3 sets of the holly using brown ink onto Deluxe Flower Shaping Paper. Add color to the flowers using red ink (Stampin Up- Real Red) and daubers. Add color to the holly using green ink (Stampin Up- Old Olive) and daubers. Shape the flowers and holly using the coordinating 3D Shaping Molds. Assemble the flowers and add Prills to the middle of each using a liquid adhesive. Let dry. 

Die cut the letters for the title from Luxe Gold Cardstock and white cardstock. Layer the letters slightly off set from each other to create a shadow of sorts. Adhere to the bottom right hand corner of the layout. I also used sticker words matted in patterned paper to complete the title.

Stamp and die cut 2 of the Home for the Holidays image using brown ink. Add color to the images using Zig Clean Color Markers and a waterbrush (Persian Blue, Light Green, Yellow, Light Grey, Oatmeal, Deep Green, Mid Brown, Cobalt Blue, Green Grey, Carmine Red, Olive Green). From one of the stamped images, cut out the deer and the truck. Adhere these to the other image using foam squares. Adhere this piece to the right of the matted photo, add the snowflake tucked behind it. Add the other snowflake to the left hand corner of the layout. Add Stickles to the snow and Christmas Lights.

Add the flowers around the matted photo and the title. Then add the holly leaves around some of the flowers.

Other Products: Cardstock (White, Kraft), Stickles (Star Dust), Waterbrush, Gems, Scrapbook Adhesives by 3L (Creative Photo Corner Kraft, Dual Tip Glue Pen, E-Z Runner Ultra, 3D Foam Squares White Mix, Crafty Foam Tape, Adhesive Dots Medium), Stampin Up Ink (Real Red, Old Olive, Early Espresso), Paper Distresser, Mini Word Stickers

Instructions:

Prepare a white 5 x 7" card base with a piece of the Home for the Holidays paper (sheet 9B) slightly smaller on top.

Die cut one of the Holiday Snowflakes Frames (2nd largest) out of white card stock and adhere to the center of the card.

Stamp 2 of the Home for the Hoidays images on white with the Black Color Box ink and heat emboss with the Black embossing powder. Color with the Zig markers. Using the coordinating die cut both out. Leave one whole and cut the truck and snowman out of the second one. Use foam dots to adhere to the center of the card.

Stamp the sentiment from the Holiday Village set on white and cut out with the tag die. Add tiny foam dots to the back and adhere to the bottom cneter to finish.

Other Products: Die cut machine, Color Box -Black, Black embossing powder, Tiny foam dots, Paper trimmer,

Instructions:

Cut white card base and fold with dimensions of 8" x 5 3/4". From the paper collection, die cut a rectangle with dimensions of 7 3/4 "x 5 1/2" and glue to the base.

Cut the largest frame from the Holiday Snowflake Frame Die set from silver paper and glue it. Cut 3 smaller frames from white paper. On one of them, stamp the picture from the Home for the Holidays Die set with black ink and color with watercolor markers. In the second frame, cut a hole with a smaller die and then in the third frame, cut the hole with the third largest die. Arrange the frames on top of each other in the order 1. Frame with opening 2. frame with smaller opening 3. thinnest frame and glue. From silver paper, cut a smaller frame from the Royal Elegance Frames Die set and stars and glu.

To create flowers, stamp the Large Festive Poinsettia on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Pad – Rose Madder then shadow with the same ink and die cut using the coordinating die. Form with Large Festive Poinsettia mold. In the middle add silver stamens.

To create leaves, stamp the leaves from Holly Berry Spray Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Emerald Green , die cut with the coordinating die, shade using this same ink.

On the strip from the paper collection, stamp the sentiment in black ink.

Arrange all the elements as shown, cover with glue and sprinkle with glitter.

Other Products: Watercolor markers, diecutting machine

Instructions:

Other Products: Smooth White Cardstock, Watercolor Paper, Watercolor, Versamark, Hot Glue

Instructions:

It’s a ready folding card measuring 8 1/2 by 6 inches. Cut a panel from Deluxe flower shaping paper measureing 8 1/4 by 5 3/4" and add this panel on to the card base using foam circles. Cut a panel of sheet 5A from Home for the Holidays Paper Collection which is slightly smaller than last panel and adhere this panel on last panel using clear glue.

Cut a frame on Deluxe Flower shaping paper using Holiday Snowflake Frame Die and cut another same frame on Designer Paper from Home for the Holiday Paper collection using Sheet 1B, adhere both frame together using clear glue. Place a last smallest frame die in the center of this frame from Holiday Snowflake Frame Die and make a window using die cutting machine. Before adding this window frame on the card cut a scenic pattern from paper collection and adhere on to the card base using clear glue then add this window frame on the card using foam circles.

Stamp the car and girl images on the Deluxe Flower Shaping Paper using Archival Coffee Ink Pad and other required images with Archival Leaf Green Ink, Die cut all images using coordinating dies. Color all images using Zig Clear Brush Markers, apply clear glue randomly on the images, cover with glitter dust and add all images as shown using foam circles.

Stamp the Sentiment 'Happy Memories' on pattern paper in Leaf Green ink and die cut sentiment using ticket die from Ticket and Tag Die Set. Add this sentiment to the center of the card using foam circles.

Die cut small tags from pattern paper using Ticket and Tag Die add twine in to the tags and add on the left side of the card as shown using foam circles.

Cut the little snowflake from the Snowflake die set and add randomly on the card using clear glue, also add Nuvo Drops to embellish the card.

Other Products: Die Cutting Machine, Glitter Dust, Nuvo Drops, Green Twine.

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the outer Majestic Swirl Frames Die over the folded card with one edge slightly over the folded side and die cut to create the shaped card. Cut single piece using this same die from patterned paper collection and place into card using Designer Dries Clear Adhesive. Die cut an outer frame from collection paper and adhere to the front of the shaped card using  Adhesive Foam circles. Cut a few snowflakes using Holiday Snowflake Frame Die from golden paper and glue into using hot glue.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the (watch tutorial). Add dries clear adhesive around flower stamen and sprinkle Ribbit Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp leaves from Clematis Cling Stamp on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create sentiment, cut letters using Letters & Numbers Die from gold paper and glue it to the base using dries clear adhesive. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,