Instructions:

Cut a piece of the Deluxe Flower Shaping cardstock to 5 x 7". Cut another piece to 5 x 7 1/2", score and fold at 7". Attach the two pieces together to create a card base. Cut another two 5 x 7" size panels and set aside. From sheet 4A of the Holiday Ornament paper collection, cut a piece of the paper to 4 7/8 x 6 5/8" size. Using from the HCD1-7465 Large Holiday Ornament Die, diecut the ornament outline from the 2 white panels, green panel and card base, making sure to align the placement so these can be layered on top of each other perfectly. When using the outline die, you’ll want to diecut the opening a little larger to allow the ornament to twist around easily in the opening. To do this, diecut your outline once, then the second time place die a little to left or right and diecut, then diecut one more time at the top and this creates a larger opening. Stamp the string of ornaments from HCPC-31030 Sparkling Holiday Ornaments Cling Stamp Set in Leaf Green onto one of the white panels as shown. Stamp the ‘Merry Christmas’ sentiment from HCPC-31028 Christmas Holly Accents Cling Stamp Set in Carnation Red onto panel as shown and also stamp one on a separate piece and diecut. Lightly ink the left and right edges with Encore Gold ink and sprinkle with Roman Gold embossing power and heat set. Trim the other coordinating size white panel into two sections at the lengthwise. Make the cut at the top and bottom point of ornament outline and trim off 1/8" section gap between the cut. Now attach these panels underneath the main panel. 

Using from the HCPC-31029 Large Holiday Ornament Cling Stamp Set, stamp the ornament image in Encore Gold ink onto the Deluxe Flower Shaping paper and sprinkle with Roman Gold Embossing powder and heat set. Repeat this step for the star image. Diecut these with the coordinating dies. Also diecut the outline from sheet 9A of the paper collection. Cut two small pieces of the stamen wire, attach at the top and bottom point of ornament and then layer onto one of the ornament cutout pieces from card base. 

Use the Zig markers along with the blender to color the ornament, star and ornaments on the card panel. You’ll need the Carmine Red, Bright Yellow, Yellow, May Green, and Light Green markers to color the images. Add a light touch of the yellow and red to the Merry Christmas sentiment. Now layer the ornament together using hot glue and glue. Add the star on top. Sponge the edges of card panel and ornament opening with Sunflower. Then follow with the Leaf Green ink. Use the yellow dauber to sponge some of the Dries Clear glue around the top left corner and bottom right, then sprinkle with the Frosting powder. Do the same around the ornament opening, but sprinkle with the Mustard glitter. Hold the ornament in place of the opening, and attach the panel onto the green panel, and then attach that onto the card base. Diecut a border from the HCD2-7427 Filigree Accents Die, sponge the edges with Encore Gold, sprinkle with Roman Gold and heat set. Attach onto card as shown and trim off excess. Attach sentiment.

Other Products: Ranger Roman Gold Embossing Powder, Hot Glue, Hot Glue Gun, Wire Cutter, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

The ready top folds card measures 8 1/2″ by 6 1/2″. To prepare the card base, cut a smooth white cardstock measuring 81/2″ by 6 1/2″ and a second piece measuring 9″ by 6 1/2″.  On 9″ length, score at 1/2″ and crease well. Glue the other panel on top to create a top fold card front.

For the top layer, choose the paper from the designer paper collection and cut it 1/4″ smaller than the main card front so that it shows a white border all around, Mat a golden layer behind making a delicate golden border of 1/16" all around. 

Cut 2 pieces of filigree frames, one each in white and Luxe gold cardstock, and glue them together to add some extra strength to the big frame. Layer it on the card using foam dots. Next, choose a pattern paper from the paper collection and layer it on the card front using foam dots. 

Stamp all the required images using versamark sticky ink and sprinkle gold heat embossing powder, Dust extras, and heat set the images. Cut the images using the coordinating dies and color them using Zig Clean Clear Brush Markers. 

Once all the elements are ready, adhere a few extra die cuts behind each painted ornament to add extra strength and then layer these as shown using foam dots and complete the card by adding Christmas stamped and die-cut sentiments from Christmas Lantern Cling Stamp Set.

Further, embellish the card using a diamond chain and glitter. Also, add some die-cut stars using a Large Holiday Ornament Die. 

Other Products: Smooth white cardstock, Versa Mark ink, Diamond Chain, Adhesive that dries clear, Heat gun, and double-sided tapes.

Instructions:

Other Products: Smooth White Cardstock, versamark, Dimensional Tape, Flat back pearl, Satin cord

Instructions:

Card size: 6 x 6". Make a shaped Simple Centerpiece card base (see video: How to Create Shaped Elegant Centerpiece Cards the EZ Way (heartfeltcreations.us).  Score front of card at its center to parallel the cards center fold, fold downward toward card center. Cut another front for card from white cardstock and also from plaid decorative paper times 2 (1 for inside card). Add glue to bottom half of the card base front then glue new card front to base making sure all sides are matched, this forms your easel. Glue 1 plaid die cut onto front. Glue the other plaid piece to the inside of card (be sure to avoid score line for a good fold).  

Use 2 Centerpiece dies together to create gold frames or borders. Two sizes for the front (6” and 4” by 1/2” thickness each) and 3 sizes for the inside (5 3/8”, 4”, and 2 1/2" by 1/2" thickness). For the card front, glue the outside gold border to card then pop up the inner gold frame. Glue a piece of red decorative paper to the inside of frame.  Inside card, glue both of the larger gold borders down, add red center to smaller die border.

Stamp the sentiment using Vermillion onto white, die cut to fit smallest gold frame/border then glue it to the gold. Pop up the sentiment/border to the lower part of card inside to act like a stop for the easel. Glitter front and inside of card.

Stamp ornaments using embossing ink of choice (VersaMark used here).  Sprinkle with gold powder then heat to emboss. Color ornaments with green and red then add gold glitter pen to ornaments. Glue and/or pop up ornaments to center red. Add gold thread to ornament tops.

Stamp greenery using Library Green on green decorative paper, die cut then add to card front on top of ornaments along with some red stamen and gold ribbon. Save 1 piece of greenery for the inside of card.

Stamp poinsettia using Vermillion on Deluxe Flower Shaping Paper, sponge with Carnation Red, die cut, form in shaping mold then glue 2 together to form flower. Insert gold stamen.  Glue flower, red stamen, greenery and gold ribbon to the inside raised sentiment on the left side.  Glitter flower.

Other Products: White cardstock, VersaMark, gold glitter pen, gold ribbon, Copic Markers: R43, R24, RV29, YG05, YG07, C2

Instructions:

Make a card base measuring 7 inches by 5 inches from white card stock. Add a mat layer of maroon card stock on the card base. Cut a piece of white card paper measuring 6 1/2" and 4 1/2" and emboss it in the embossing folder. Add some carnation red ink on top and adhere this to the card base.

Stamp the big ornament and the Christmas Holly Accents on Deluxe flower shaping paper with jet black ink. Color with zig  markers. Cut with coordinating dies and add to the card.

Stamp the large poinsettia flowers on to Deluxe flower shaping paper with carnation red ink and shade the flowers with similar colour and shape in the 3/D flower shaping mold.

Cut a Christmas sentiment from the paper collection and add to the card.

Other Products: Die cutting machine, scoring board, spellbinders corrugated embossing folder Maroon Cardstock

Instructions:

Create base using outside Large Holiday Ornament Die. Stamp ornament with Large Holiday Ornament Cling Stamp Set onto collection paper with EMBOSS - Embossing stamp pad - Clear and sprinkle with Embossing Powder - Gold 359760 and heat using heating gun. cut using the coordinating dies. Place on the top of card using adhesive foam strips.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers and leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Pierce the center and glue in some stamens using hot glue gun.

To Create the leaves, stamp Christmas Poinsettia & Holly Cling Stamp Set with Jet Black Archival ink and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, EMBOSS - Embossing stamp pad - Clear

Instructions:

Fold white cardstock to 6 x 5" with fold on the top then use the Decorative frame outline die from the Royal Elegance Frames to cut, leaving the top of the die over-hanging fold by about 1,5". Cut out a light green frame with the same die from the Festive Christmas Paper Collection, cut out a light green frame with Large decorative oval die from the same paper collection. Using Decorative frame die  cut out a white frame. Adhere all frames to the base using adhesive tape. Stamp the sentiment from the Christmas Holly Accents Cling Stamp Set in Red Geranium ink and cut out with coordinating die. 

Stamp flowers from the Small Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping Paper. Color them with Lady Bug ink, diecut with coordinating dies and shape with molds, add Rock Candy Small Stamens. 

Stamp berries from the Christmas Lantern Cling Stamp Set, pine branches and holly branches from the Christmas Holly Accents Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating dies. Stamp ornaments from the Sparkling Holiday Ornaments Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating dies. 

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over ornaments and branches, add some pearls and Styrofoam balls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, pearls, colored pencils, sisal, Styrofoam balls

Instructions:

Cut a white cards base 4 1/4 x 5.5 ". Cut two pieces of white cardstock to 4 1/8 x 5 6/16" and 3 3/4 x 5 1/8". Cut out white frames with dies No. 3 and No. 4 from the Oval Filigree Frame Die. Adhere them to the base.

Stamp flowers from the Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping Paper. Color them with Lady Bug ink, diecut with coordinating dies and shape with molds, add Rock Candy Small Stamens. 

Stamp berries from the Christmas Lantern Cling Stamp Set, pine branches and holly branches from the Christmas Holly Accents Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp ornaments from the Sparkling Holiday Ornaments Cling Stamp Set and the Noel Holiday Ornaments Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating dies. 

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over ornaments and branches, add some pearls and Styrofoam balls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, pearls, colored pencils, sisal, Styrofoam balls

Instructions:

The finished ornament measures 4 inches by 6 inches. Stamp on white cardstock and emboss with golden powder the large ornement stamp. Die cut with the acoordinating die. Cut it 5 times. Repeat but on red paper #6B. Glue the red part on the white diecut. Cut the star in golden paper and glue it in the center. Fold all the pieces in half and glue all of them on each other to make a ball. 

Stamp your flowers from Christmas poinsettia collection in vermillion ink and manganese blue ink. Stamp with ink onto white flower shaping paper and color with the same ink. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe Flower Shaping kit tools. Use 3 layers to make your flowers. Glue them together and add stamens in the white prills in the center.

Stamp in olive green leaves from Hollyberry spray kit. Color with the same. Cut it with the coordinating die.  

Put cheesecloth and sewing thread on the top of your ornement and glue your flowers and leaves over.  

Make a hole and insert a ribbon to suspend.

Add art glitter lion’s mane with white glue on the ornement.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, sewing thread, ribbon

Instructions:

To make the card base, cut 2 pieces of White cardstock 9 x 6 inches and 9 1/2 x 6 inches. Take the longest piece, score and fold at 1/2 inch along the longer side and then cut an oval at the exact center using HCD2-7382 Simply Classic Oval Frame Die. Adhere both the pieces along the scored hinge to make a top fold card base. On the front panel, fasten a white thread along the oval vertically and secure it using tacky tape. 

Cut 2 pieces of pattern paper from HCDP1-2153 Holiday Ornament Paper Collection to 1/8 inch less than the card base, cut out the coordinating oval from one of the pieces and adhere them on the front and inside panels. Using the border dies from HCD1-7263 Swirly Accent Spray Die, cut 8 pieces using Luxe Gold cardstock and adhere them on the corners of the front and inside panels.

Cut 1 piece each of White and Gold cardstock with the outermost frame from HCD2-7382 Simply Classic Oval Frame Die, stack and glue the pieces with gold on top and adhere this frame as outline to the oval center on the card front. Take the decorative oval die from the same set and cut 1 piece from White cardstock and adhere it to the inside panel by aliigning it with the oval center. Add the Happy Holidays sentiment from the Starry Holiday Greetings Stamp and Die sets to the center of the inside panel.

To make the spinner focal element, stamp and heat emboss the large ornament image from HCPC-31029 Large Holiday Ornament Cling Stamp Set with Yellow glitter embossing powder, twice on Gold cardstock and once each on a Red and a Green pattern paper from the collection. Cut the images using the coordinating die. Also, cut 2 extra pieces of the ornament outline on White cardstock.

Adhere the Gold die-cuts to each of the White outlines and fill the gaps with the Red and Green die-cut pieces alternatively like a puzzle; secure them with glue. Now adhere both the ready ornament pieces onto the thread with the embossed side facing out. This makes the spinner element. Finally add the sentiments from HCPC-31026 Christmas Lantern Cling Stamp Set and finish off the card by adding rainbow rhinestones.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, rainbow rhinestones, hot glue and glue gun, White thread, WOW embossing powder, Versamark embossing ink

Instructions:

Cut a piece of white card stock measuring 7 3/8 x 10 3/4” and score at 5 3/8” for a side folding card base. Cut a piece a red mirror card stock to 7 3/8 x 5 3/8” and adhere to the front of the card base. Now from the HCDP1-2153 Holiday Ornament Paper Collection cut a piece measuring 5 1/4 x 7 1/4” from sheet 10B (dark green) and glue it to the card front. Now take the HCD2-7426 Oval Filigree Frame Die and using the largest die cut 2x, once from Luxe Gold Card Stock and once from white card stock. Adhere these together so that the white is slightly offset on top of the gold and the gold peaks out behind the white. Now cut the large oval die from the same die set, cutting it 2x from sheet 7B from the same paper pack. Attach the frame and one green oval to the front of the card and the other green oval to the inside of the card.

Using HCPC-31029 Large Holiday Ornament Cling Stamp Set Stamp put the large ornament with gold metallic ink onto white card stock and heat emboss with gold embossing powder. Do this once more but only stamping the center star. Using Copic markers carefully color the top and bottom of the ornament using reds and greens. Now using the coordinating dies, cut out the large ornament with both the outer and the inlay piece. Also cut the individual star that was stamped and embossed. Using just the large outer die, cut 4x, once from Red Mirror Card Stock, and 3x from 110lb heavy weight card stock. (Deluxe Flower Shaping Paper was used in sample). Adhere all the ornament layers together with colored ornament layer on top followed by Mirror card and 3 white layers. Color the edges of card stock with matching red Copic marker. Glue the chipboard like Large Ornament to the card front and place the gold star in the center. Add gold gems to the Large Ornament and in the center of top star.  

Stamp a sentiment from the HCPC-31028 Christmas Holly Accents Cling Stamp Set with Red Geranium Archival Ink and die cut with the coordinating ink. Attach to the inside of the card to complete your project. 

Other Products: Red Mirror Card Stock, Copic Markers, Gold Gems, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Cut out a white paper base using the Large Holiday Ornament Die, then cut out elements from the paper collection and glue to the entire card. Stamp the bauble from the Large Holiday Ornament set on white paper with embossing ink, then dust with gold powder and heat it with the embossing heater. Cut with the coordinating die. Color with watercolor markers and glue to the card. Add dots Nuvo Crystal Drops Gloss - Apple Green. Wait for them to dry.

Stamp the elements from the Christmas Holly Accents set with embossing ink, then sprinkle with gold powder and heat with the embossing heater, then cut out with matching dies and color with watercolor markers.

From the gold paper, cut a small frame from the Slim Elegant Rectangle Die set.

Adhere everything as shown.

Other Products: Embossing ink, cutting machine, watercolor markers,

Instructions:

Create a top fold card from a smooth white card stock measureing 7 1/2” x 5 1/2”. Choose the designer paper from Holiday Ornament Paper Collection and cut to size measuring 5” x 7”. Next, mat this paper on Luxe Gold Card stock creating a border on all the sides. Mat this ready panel on white card base using glue.

Stamp the image from Large Holiday Ornament Cling Stamp Set on smooth white cardstock with black archival ink and paint them using Zig Clean Clear Markers. Cut the images using its coordinating die. Cut 4-5 extra die cuts. Create a shaker element using extra die cuts, prills and acetate sheet. Adhere this dimensional shaker ornament on the card base using glue.

For the flowers, stamp flower images from Christmas Poinsettia & Holly Cling Stamp Set on the Deluxe flower shaping paper using Lady Bug Memento ink. Color them using same ink. Stamp the leaves from same stamp set on Deluxe Flower Shaping paper with Olive Archival  ink and color them using Leaf Green and Olive Archival ink. Cut the flowers and leaves using their coordinating dies and shape them using coordinating 3D shaping mold. Now add Go Man Go prills to the centre of flowers.

Stamp the sentiment from Christmas Lantern Cling Stamp Set on a white card-stock and die cut it using coordinating die. Cut a die cut from luxe gold card stock using same die and adhere it behind the sentiment image a little offset. Also, gold heat emboss the butterfly from Small Floral Butterfly Cling Stamp Set and cut it using its coordinating die. Color it using Vibrant Fuchsia Archival Ink and leaf Green Archival Ink. Shape the butterfly using a tool from deluxe flower shaping kit for extra dimension.

Once all the elements are ready, assemble the card as shown. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, Score Board.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7”. Die cut the decorative frame using the No. 1 from the HCD1-7306 Decorative Circle Frames Die and the No. 1 die from the HCD1-7154 Eyelet Circle & Basics Die. Die cut the circle out of front of the card. Cut a piece of plaid pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card.  Cut a piece of gold card 4 5/8” x 6 5/8".  Cut a piece of pattern paper 4 1/2” x 6 1/2” and adhere to the smaller gold card.  

Die cut a circle out of both layers using the largest die from the HCD1-7154 Eyelet Circle & Basics  die using the decorative oval as a guide and then adhere together.  

Stamp the images from the HCPC-31031 Noel Holiday Ornaments Cling Stamp Set in Tuxedo Black ink on alcohol marker friendly paper using a stamp positioner. Leave the stamps in on the stamp positioner and colour the images with alcohol markers and then stamp again with Versamark ink and heat emboss with gold embossing powder.  Die cut with the coordinating dies,  Add Wink of Stella to the ornaments and then add 3D Crystal Lacquer. When dry, add strong thread to the centre of the ornament with the front facing down in the middle of the die cut circle and adhere the other ornament on top. Adhere the ornament threads to the top and bottom of the die cut circle and then add the two pre done layers on top securing the threads. Adhere the decorative frame to the card front. Die cut an eyelet frame using the largest eyelet circle die from the HCD1-7306 Decorative Circle Frames Die and the No. 1 die from the HCD1-7154 Circle Basics Large Die set and adhere to the circle as shown. Die cut a narrow circle frame using the No. 1 die from the HCD1-7155 Circle Basics Large die and the No. 1 die from the HCD1-7154 Eyelet Circle & Basics die frame from green pattern paper and adhere to the front of the eyelet frame.

Stamp the large and small spray images from the HCPC-3959 Holly Berry Spray in Olive ink on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating dies. Adhere the large and smaller sprays to the top of the card. Stamp the small leaf image from the HCPC-3959 Holly Berry Spray Cling Stamp in Olive ink on Deluxe flower shaping paper and die cut with the coordinating die and adhere. 

Stamp the small leaf spray from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Leaf Green ink on Deluxe Flower Shaping Paper.  Colour the image swith Leaf Green and Vivid Chartreuse inks and die cut with the coordinating die.  Adhere around the larger holly sprays.

Stamp the poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp and the HCPC-3958 Small Festive Poinsettia Cling stamp in Vermillion ink.  Colour centres with Sunflower ink and die cut with the coordinating dies. Colour the petals and backs of the flowers with Vermillion ink and shape using the coordinating molds.  Assemble flowers with two of each size. Dye small polystyrene balls with Lemonade and Peach Bellini alcohol inks and adhere to the centres of the flowers with 3D Crystal Lacquer. Adhere the flowers at the top of the card as shown.  

Stamp the leaves from the HCPC-3957 Large Festive Poinsettia Cling Stamp in Olive ink on Deluxe flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating die. Shape using the coordinating mold, trim and adhere around the flowers.

Stamp the small birdie images from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Olive ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green ink and die cut with the coordinating die.  Stamp the small birdie images from the HCPC-31028 Christmas Holly Accents Cling Stamp Set again in Tuxedo Black ink on alcohol marker friendly paper. Colour the images with alcohol markers and die cut with the birdie die only. Adhere the birdies to the inked leaves with small foam squares and adhere to the base of the circle aperture as shown.

Stamp the ornaments from the HCPC-31031 Noel Holiday Ornaments Cling Stamp Set in Tuxedo Black ink on alcohol friendly paper. Colour with alcohol markers and die cut with the coordinating dies.  Add Wink of Stella to the images and then add 3D Crystal Lacquer to the images. Adhere around the flowers.

Dye small and micro polystyrene beads with Crimson alcohol ink and finish by colouring the beads with a red alcohol marker and adhere around the leaves.

To finish, add Crystal Clear glitter to the flowers, leaves, birds and holly with clear gloss gel medium on a paint brush.

Inside left of card: Cut a piece of gold cardstock 4 7/8” x 6 7/8”. Cut a piece of pattern paper 4 3/4” x 6 3/4” and adhere to the front of the gold card. Die cut the circle out using the HCD1-7154 Eyelet Circle & Basics and adhere to the inside left of the card. Die cut an eyelet frame using the largest eyelet circle die from the HCD1-7306 Decorative Circle Frames Die and the No. 1 die from the HCD1-7154 Eyelet Circle & Basics and adhere to the circle as shown. Die cut a narrow circle frame using the No. 1 die from the HCD1-7155 Circle Basic Large die and the No. 1 die from the HCD1-7154 Eyelet Circle & Basics frame from green pattern paper and adhere to the front of the eyelet frame.

Inside back of card: Cut a piece of gold cardstock 4 7/8” x 6 7/8” and adhere to the inside back of the card. Cut a piece of pattern paper 4 3/4” x 6 3/4” and adhere to the front of the gold card. Stamp the sentiment from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Versamark ink on Deluxe Flower Shaping Paper and heat emboss with gold embossing powder. Die cut with the coordinating die and then adhere to the inside back as shown.

To finish, add gold pearls around the sentiment.

Other Products: Clear gloss gel medium, paintbrush, Pink Fresh Studio Gold Pearls, Copic Markers - Green YG67, G)7, YG231, YG03, Red R59, R29, R22, Yellow Y38, YR12, Y06, Versamark ink, Neenah Classic Crest 80 Ib cardstock, Clear Wink of Stella, Micro Polystyrene balls, Ranger Alcohol inks - Crimson, Lemonade and Peach Bellini, foam squares, white upholstery thread

Instructions:

My card is a shaped card. Make card base by cutting the die just over the fold of Deluxe Flower Shaping Paper.Cut a piece of Sheet 3A of the Paper Collection using the die twice. Cover the front and the inside of the card with this. Using the Stack and Store Daubers edge the paper with Memento Bamboo Leaves and sponge some ink over the whole shape to make the green just a shade darker on the inside piece.  

Stamp the ornament onto Deluxe Flower Shaping Paper using Leaf Green Archival Ink and emboss with gold embossing powder. Die cut the piece using coordinating dies and glue to the card front. I stamped and embossed the ornament twice so I could cut out the center star to give me an additional piece of the image to use. I used a cut up piece of the double dots and used that to adhere the star to the card front.  This gives it a bit of dimension. Set aside to dry.

Stamp the sentiment onto a piece of the Deluxe Flower Shaping Paper using Memento Bamboo Leaves ink and die cut using coordinating die.  Clue to the inside of the card being careful to place it over the part of the paper that had more ink sponged to make it darker. This allows the sentiment to show up better when it has been glued down.  

This makes a very beautiful shaped card and could also be hung on the tree when received.  

Other Products: Gold Embossing Powder, Die Cut Machine

Instructions:

Cut a piece of the light green paper, with the darker green pattern from the bottom of the 12” x 12” paper – to 6.25” x 8.75” and adhere to a slightly larger white side fold card base. Cut the same size rectangle from the second sheet of the same patten and cut this diagonally, turn the pattern and adhere this to the top of the first rectangle to create a border.Cut a 5.75” x 7.75” golden yellow paper and adhere to the centre of the card base.

Stamp ornaments using versamark onto paper from the collection, cover with gold embossing powder, remove excess and heat to set. Die cut the ornaments and adhere to a white card diecut of the same ornament. Tie with thin white bakers twine.

Cut a 4.75” x 6.75” ornament paper and layer onto a slightly larger white card and green paper.

Stamp the sentiment onto vellum using black ink, cover in clear embossing powder, remove excess and heat to set. Tear the sentiment into a strip, wrap around the edge of the green paper and secure in place.

Position the ornaments on the front of the card, holding in place with foam pads. Secure the bakers twine with double sided tape across the top of the panel.

Use foam pads to adhere the decorative panel to the centre of the card.

Die cut 2x small flourish companion frames using white card and adhere top and bottom opposite corners of the yellow layer using dries clear adhesive.

Other Products: White card, white bakers twine, foam pads

Instructions:

Take a 5" x 7" card blank, cover with red paper from the Holiday Ornament Collection Paper Padcut to 4 3/4" x 6 3/4" using Designer Dries Clear Adhesive. Die cut the Royal Elegance Frame Die, fancy edge, in white card. Adhere to card front.

Stamp the Large Holiday Ornament from the Large Holiday Ornament Cling Stamp Set onto white card with Versamark Embossing Ink. Add gold Embossing Powder and dry with a heat tool. Die cut with the matching die. Color the top and bottom pieces with No. 024 Wine Red Zig Clean Color Real Brush pen. Cut off these two pieces and put to one side. Die cut another Large Holiday Ornament in Deluxe Gold card. Adhere to  card front with foam tape. Adhere the white Large Holiday Ornament top and bottom pieces to the gold Large Holiday Ornament with foam tape.

Die cut the patterned centre piece from the same die set in Luxe Gold card. Place the gold centre piece onto red paper from the paper collection and cut around the outside edge. Adhere the gold die-cut to the red paper. Adhere this to the front of the card with foam tape. Die cut two gold stars in gold card.  Adhere the gold star. Adhere the second gold star with foam tape. 

Stamp onto white card an assortment of Poinsettias from the Large Festive and Small Festive Poinsettia Cling Stamp Sets. Stamp four small and two medium Poinsettias in Memento Love Letter ink. Color with the same ink in the middles and tips. Stamp three sets of Holly from the Small Poinsettia Stamp Set, in Ranger Archival Leaf Green ink. Die cut with the matching dies. Place in the Poinsettia Flower Shaping Molds and run through a die cutting machine. Adhere two of the same size flowers together. Add small white polystyrene balls to the flower centres. Adhere flowers and leaves to card with hot glue. 

Stamp onto white card with Ranger Archival Jet Black ink, the Merry Christmas Sentiment from the Christmas Lantern Cling Stamp Set. Die cut with the matching die. Adhere to side of card. Apply dries clear glue to the flowers, white balls and leaves with a small piece of sponge. Add clear glitter. All done.

Other Products: 5" x 7" card blank, white card, die cutting machine, Versamark embossing ink pad, heat tool, foam tape, Memento Love Letter ink pad, small white polystyrene balls, hot glue, clear glitter.

Instructions:

Create a 6 x 6 inch card base in white cardstock. Cut a piece of green decorative paper 5.5 x 5.5 inches from the Holiday Ornament Paper Collection, adhere to the card front. Cut the outer frame with the Decorative Circle Frames Die in green designer paper, distress with Vivid Chartreuse and adhere with foam tape.  Cut out the decorative part of the die in gold and white cardstock, cut out the centers with the Circle Basics Large Die, adhere the gold and white pieces together offset to create a gold shadow.  Adhere to the center of the card with foam tape.

Stamp the ornament x2 from the Large Holiday Ornament Cling Stamp Set and the sentiment from the Christmas Lantern Cling Stamp Set in embossing ink on watercolor paper, heat emboss in gold, cut out with coordinating dies and watercolor the ornament with Zig markers. Create a dimensional ornament by cutting out the decorative center piece in one of the ornaments and layer with foam tape. Adhere to the center of the card. Adhere the sentiment as shown.

Stamp the poinsettias from the Large Festive Poinsettia Cling Stamp Set in Black Cherry, sponge with same, cut out with coordinating dies and sculpt with the Large Poinsettia Shaping Mold, add stamens and Frosting Powder.  

Stamp the holly leaves from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse and cut out with coordinating dies, sculpt with shaping mold and add Frosting Powder.

Adhere poinsettias and holly as pictured.

Other Products: white cardstock, embossing ink, watercolor paper

Instructions:

Card size is 4 x 6”. Score and fold 8 1/2 x 5” white cardstock at 4 1/4” on the long side. Using the Large Holiday Ornament Die, cut a shaped card base. I placed the top of the die about 1” over the fold to keep the fold intact. Score and fold the ornament at 2 1/4” to form the easel. Diecut the full ornament two more times, once from white cardstock and once from the Holiday Ornament Collection sheet 6B. Adhere the two together and adhere to the bottom portion of the folded easel. Stamp the Large Holiday Ornament on Luxe Gold cardstock 2x using VersaMark ink, cover with Ranger Gold Tinsel Embossing Powder and heat set using the Heat It tool. Diecut the full ornament image using the coordinating two dies and diecut just the center star from the second image. Adhere the diecuts to the card front as shown with dries clear adhesive and a dimensional dot for the star.

Stamp the ornament 2x on sheet 6B using VersaMark ink, cover with Ranger Gold Tinsel Embossing Powder and heat set using the Heat It tool. Diecut and trim to fit the inside of the card. Adhere using dries clear adhesive.

Stamp the ‘Merry Christmas’ sentiment from the Christmas Lantern Cling Stamp on white cardstock using VersaMark ink, cover with WOW Primary Apple Red Superfine Embossing Powder and heat set. Diecut using the coordinating die. Cut 4 more times from white cardstock and adhere the layers together. Adhere to the inside of the card as shown to create the easel stop. 

Stamp the poinsettias and holly leaves from the Poinsettia & Holly Clusters Cling Stamp set on Real Red and Garden Green cardstock using Real Red and Garden Green ink, diecut using the coordinating dies and shape using the coordinating mold. Using a stylus from the Deluxe Flower Shaping Kit, cup the centers and adhere two flowers together and one holly using dries clear adhesive to create the poinsettias. Using a paint brush, add diluted dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Add Heart of Gold Prills to the flower centers and adhere the flowers to the card front as shown using hot glue.

Using red satin cord, make a small bow and adhere to the top of the ornament. 

Other Products: White Cardstock, Diecutting Machine, Misti, Hot Glue Gun, Real Red and Garden Green Cardstock, Real Red and Garden Green Ink, Paint Brush, VersaMark Ink, Ranger Gold Tinsel Embossing Powder, WOW Primary Apple Red Embossing Powder, Red Statin Cord, Dimensional Dots

Instructions:

Prepare a card base out of red Card stock 5 x 7". On the front of the card add a piece of white card stock slightly smaller. Dry emboss with an embossing folder of your choice and adhere to the card base.

Stamp the large Holiday Ornament on white with Versa Mark and emboss with gold powder color in with Zig makers. Cut out with the coordinating die. Add foam dots to the back and adhere to the front of the card. Add one big gem to the center of the star and smaller gems to the smaller stars as shown. Stamp the sentiment on white with Blazing Red ink, cut out and add to the lower right hand side of the card.

On the inside of the card cut a piece of the same red 3 3/4” x 6 3/4”. Score the long side at 7/8”, 1 7/8”, 2 7/8”. Fold making all the folds mountains. Apply glue to one of the back and adhere to the center of the card making sure to butt it up at the top and center.  Cut 2 pieces of red 2 1/4” x 4 1/8”.  Add a piece of white card stock slightly smaller and adhere to the front of the mountain piece as shown. For the center piece, cut a piece of red 2 1/2” x 3 7/8”. Cut a piece of white slightly smaller. Stamp the sentiment on the white with the Blazing Red ink and adhere to the red.  Add this to the back side as shown.

Cut 2 pieces of white card stock 3 7/8” x 6 3/4”.  Dry emboss both and adhere to the inside of the card.

Stamp several of the ornaments on white card stock with the Blazing Red ink, color in with the Zig markers of your choice. Use the coordinating die to cut out. Stamp the pine twigs on white with Northern Pine ink, color in with the New Sprout ink. Cut out with the coordinating die. Arrange and adhere both the twigs and ornaments as shown.

Other Products: Paper trimmer, Die cut machine, clear gems, red card stock, embossing folder, Staz-On Blazing Red ink,

Instructions:

Card size 5” x 7”. Take pattern paper from HCDP1-2153 Holiday Ornament Paper Collection, tear edges and adhere it on card base using designer dries clear adhesive. Cut one intricate frame die from HCD2-7424 Rectangle Filigree Frame Die on white cardstock, adhere using designer dries clear adhesive as shown.

Cut base die from HCD1-7465 Large Holiday Ornament Die on luxe gold cardstock, and adhere using foam tape. Stamp large ornament image from HCPC-31029 Large Holiday Ornament Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating die HCD1-7465 Large Holiday Ornament Die, randomly color it using archival ink-carnation red and add crystal clear glitter using designer dries clear adhesive. Adhere this ornament on top of the gold layer. Stamp star image from the same set using archival ink-carnation red, cut it with coordinating die, color it using archival ink-carnation red, add crystal clear glitter, adhere it using foam tape.

Stamp a few more ornaments from HCPC-31030 Sparkling Holiday Ornaments Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating HCD1-7466 Sparkling Holiday Ornament Die, add color it using archival ink-carnation red, add crystal clear glitter, adhere it using foam tape.

Stamp Holly leaves from HCPC-31028 Christmas Holly Accents Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating HCD1-7464 Christmas Holly Accents Dies, color randomly using archival ink-carnation red and English ivy, as shown, add randomly crystal clear glitter, adhere them using glue gun.

Add sentiment from HCPC-31028 Christmas Holly Accents Cling Stamp Set on white cardstock using archival ink-mulberry, cut it with coordinating die HCD1-7464 Christmas Holly Accents Dies, adhere it using designer dries clear adhesive, as shown.

Other Products: Big Shot Plus Machine, glue gun.

Instructions:

It is a stair step card. For the card base cut 12 by 6 inches Heartfelt Creations Flower Shaping Paper and start scoring from the long side 1 1/2", 3" and last score the line on 7 1/2" and fold in zig zag style to make stair steps.

Die cut the frame on Gold Luxe card using Oval Filigree Frame Die and small frame on silver glitter card sheet.

Die cut the shape using smallest rectangle die from Slim Eyelet Rectangle Die on Gold card and die cut the shape of rectangle on Silver Glitter Sheet using Slim Basic Rectangle Die and adhere this shape on the golden rectangle using clear glue.

Stamp the sentiment from Celebrating you stamp set on the white card using versamark embossing ink cover it with golden tinsel embossing powder and heat it using heating tool, trim and add golden card under to make a border, add this tag on the rectangle using dimensional tape.

Stamp the images from Sparkling Holiday Ornaments Stamp set on silver Card using versamark embossing ink cover it with golden tinsel embossing powder and heat it using heating tool, die cut with coordinating dies.

Arrange all ready elements as shown using dimensional tape and clear glue.

To finish the card, embellish with decorative beads.

Other Products: Dimensional Tape, Decorative Beads, Silver Glitter Card, Golden Silver Tinsel Embossing Powder, Versamark Embossing Ink.

Card size: 5 x 6 3/4". Make a decorative shaped card following the instructions on Emma Lou’s video here (How to Create Decorative Shaped Cards for All Occasions (heartfeltcreations.us)  Cut a front using the same outer die of the Royal Elegance Frames from lavender decorative paper (the paper used for this sample is from the Iris Garden Collection).  Also cut an oval from the Royal Elegance set from the same lavender paper, set it aside. Glue the lavender card front to the shaped card matching edges.

Cut the decorative frame and decorative oval from white and from silver cardstock, use the oval to cut the center from the decorative silver oval die cut, glue each set together slightly off-set. Glue the lavender oval to the decorative oval set, add foam to the under side then set aside. Use foam strips to adhere the silver and white frame to the card front then adhere the decorative oval stack on top, centered.

Stamp poinsettias on Deluxe Flower Shaping Cardstock using silver ink (you can choose to emboss if you don’t mind getting some embossing in the mold). Shape flowers and holly in mold then finish on a mat using the Deluxe Flower Shaping Kit. Insert pearl silver stamen, glitter petals. Add flowers and leaves to the card from top left and bottom right, insert some beaded silver stamen into the arrangements.

Stamp the ornaments using black, die cut, add silver sparkle pen, add glitter, punch 1/8” holes to insert some silver thread at the tops.  Glue and/or pop-up ornaments to center lavender oval.

Stamp sentiment using VersaMark then emboss with silver and heat set.  Die cut then add to card at the bottom of ornaments.

Add lacquer to ornaments and holly leaves as desired.

Other Products: White cardstock, silver ink, silver embossing powder, silver thread, Stickles-Crystal, VersaMark or other embossing ink.