Other Products: White Cardstock, Memento Angel Pink Ink, Dimensional Adhesive, Scissors, Paper Trimmer, Die Cutting Machine

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut white cardstock to 11 x 4 1/4 ", score and fold at 5 1/2 " to make A2 size card base. Stamp the Forever Love background in Angel Pink onto the card base as shown. From the gift box die, diecut 2 floral squares from white cardstock. Sponge 1 of the floral squares with Rouge and the other with Berrylicious ink. Cut a 2 1/2 " pink patterned square from the Heartfelt Love paper collection and sponge the edges with Berrylicious ink. Layer the darker floral square onto the pink square. Cut the light pink floral square in half and attach at the top left and bottom right of card. Use dimensional adhesive to attach layered square onto the center of card. Using from the Eyelet hearts die, diecut 3rd largest eyelet heart from white cardstock and then diecut the 2nd largest plain heart from that to create a petite frame. Sponge the edges with Butter ink and attach onto the card as pictured. Sponge edges of card base with Butter ink.

Stamp the floral corner and Just for You banner from HCPC-3803 Banners of Love in Tuxedo Black ink onto white cardstock and diecut with coordinating dies.

Use the Stack and Store daubers along with the following inks to color. Use the Dove Blender for fine details. For the leaves, use Cottage Ivy, New Sprout and Lime Pastel. For the flowers, use a combination of Rouge, Berrylicious, Rhubarb Stalk and Butter inks. Use the same inks for the banner.

Shape the banner, flowers and leaves. Cut apart the floral corner into several pieces. Attach banner, flowers and leaves onto the card as pictured. Use Dries Clear glue to add Baby's Breath glitter over flowers, leaves and rest of card as desired. Use the same glue to add Lemon Chiffon prills to floral centers.

Other Products: Neenah Papers Natural White Cardstock, Pink and Green Cardstock, Ranger Distress Inks ñ Peeled Paint, Seedless Preserves, Wilted Violet and Worn Lipstick, Prima Micro Beads Pollen, Spellbinders Platinum Die Cutting Machine.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the petunia, watch the video at https://youtu.be/KOy_qNB9OAk.

Instructions: See here view a larger photo of this project. To create box, die cut 4 sides with Gift of Love Box die set from pink cardstock. Use decorative inserts on all sides. Die cut 4 more decorative inserts and outer frame from green cardstock, glue to box sides. Die cut 4 small panels from Heartfelt Love Paper Collection, glue to box.

Fold at scored lines and apply double sided tape to all tabs. Assemble box as pictured.

Stamp Petunia flowers and leaves on white cardstock with black ink. Die cut with coordinating dies. Color flowers and leaves with distress inks and then shape with Deluxe Flower Shaping Kit. Die cut swirls and leaves from green cardstock. Glue flowers, leaves, and swirls to box with hot glue gun.

Other Products: Card-stock: Crafters Companion Pearla Hint of Gold A4 300gm, Pink Card Stock. Pan Pastels: 470.8 Violet Tint, 680.8 Bright Yell. Green Tint. Other: Water coloring brush, Scissors, Ruler, Hot glue gun, Versa-mark, Scissors, Double Sided 3d Foam Tape, Misti stamping tool, White organza and dark pink silk ribbons, pink embossing powder, Paper distressing tool,

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: The finished size of this card is 8 1/4 in. x 7 in. (21cm x 17.5cm). Click HERE to see a photo tutorial of how to make the slider card base. Taking the A4 Crafters companion cardstock, from the long edge make two hill and valley folds 2 1/4 in. (6cm) to form the card foot. This will be the card background and card foot. Cut the card front from another A4 cardstock measuring 6 3/4 in. x 5 in. (14cm x 17cm) This will be the card front base. From the remaining cardstock cut the slider 1 3/4 in. x 4 in. (4.5cm x 10cm). 

To decorate the slider card base: Find the design paper from the Heartfelt Love collection the same as the background stamp, which is red and pink. Cut this to fit all the card base pieces. Which is the card background, 8 1/4 in. x 7 in. (21cm x 17.5cm), card foot 2 1/4 in. x 8 1/4 in. (6cm x 21cm) and card front 4 in. x 5 in. (10cm x 13cm). Distress the edges of all the design papers with the paper-distressing tool. Adhere the design paper to the card base. Leaving the design paper open at the top of the card front base, so there will be a gap between the design paper and the card stock. This is so the slider can slide in and out so the card can stand on it’s own.

To decorate the slider card front: Taking the pink cardstock and the design paper from the collection with the pink and white flower pattern, cut the large leafy lace border and it’s matching boarder background. Cut both 2 x. Adhere to the card front and card foot as seen in the photo of the card. From the same design paper used for the covering of the card base back, front and card foot, cut 4 x the lace borders with the lace boarder die found in the Sweetheart Borders die set. This will be adhered across the card front to form a lace boarder; the ribbons will be placed and adhered between the two borders as seen in the card photo. Taking the reminder of the same design paper used, make the two scalloped hearts from the Eyelet Hearts die set. Cut 4 extra hearts from the white cardstock in the same size of each heart. Adhere all the hearts together to their size to form heart chipboards. To make the smaller heart, do the same but find the heart without the scalloped edge that is a little smaller than the second heart and using the pale pink paper with the white leaf and flower print. The sentiment is stamped with VersaMark and heat set with the gold embossing powder. Apply VersaMark and the pink embossing powder to the edges of all three hearts and heat set. Adhere all three hearts together.

Taking the white cardstock, pink embossing powder, the stamp, die set Banners of Love then find the word ‘LOVE’ and make the letters. Cut 4 x extra of each letter from the white cardstock to make the letters into chipboard letters. Taking the dark pink ribbon, make x 2 triple bows. Fold the bow back on it self and secure with the hot glue gun, do this to both bows. Stamp the flowers and leaves on the art foam paper with StazOn ink and use the pan-pastels to give them color. Heat with the heat tool to shape and place the stamens in the flower centers when the foam is formed. Arrange and adhere in place with the hot glue gun. Add a few stamens between the leaves and flowers to give more interest to the arrangement.

Other Products: Liquid Pearls-white, Seam Binding, Distress ink: Pickled Raspberry, Twisted Citron, Ranger-Tropical Raspberry, White pearls, Memento-London Fog, Copic Markers- RV10, B91, Y32, white card stock, 3-M foam tape, Fun Foam

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

Instructions: Card size: 6 X 6". Cut card stock 12 X 6" and score at 3" and 9" leaving a 6" space in the middle. Cut Dogwood decorative paper blue to fit middle section and two 3" pieces for the outside flaps. Cut two 3" pink dogwood decorative papers for inside. Cut two 1/2" blue and two 1/2" pink strips. Glue pink strips to the blue 3" pieces about 1/4" from edge and same with blue to pink.

Die cut all 3" pieces with Sweetheart Border outside/outline die. Die cut both 3" flaps with the same outline die. Die cut Window Box Elements decorative die twice, Sweetheart Border Die twice, Raindrops On Roses Die, Decorative Medallion die twice all from white linen

Glue die cut pink 3" panels to inside of flaps using dries clear adhesive, glue blue 3" panels to outside of flaps. Glue white Sweetheart Border to outside flaps and the Window Box decorative die to inside. Die cut "God Bless You" sentiment from panel on the Heartfelt Love Collection paper and cut a larger oval from pink decorative paper. Glue pink oval on top of blue center panel then glue two white Decorative Medallion dies, one on each side of pink oval. Glue Raindrops On Roses die cut on top of pink oval. Cut the smaller oval out of Fun Foam and glue under sentiment then glue sentiment to the center of pink oval. Tie a bow from crinkled seam binding and leave long tails to curl around oval a bit.

Stamp the Dogwood & doves with Memento London Fog, cut with the coordinating dies and color. Shape the flowers with the Deluxe Flower Shaping Kit and stack flowers gluing with dries clear adhesive as you go, then punch hole in center and insert stamen. Add a few light green Prills around stamen on white flowers. Add flowers and doves using glue and foam tape where needed. Use Liquid Pearls to add faux pearls to white die cuts. Add pearl halves to outside flap and the Sweetheart die cut.

Other Products:  Pink, white and red cardstock, Ranger Vintage Photo Distress Ink, glue gun, mounting tape, double sided tape, mini mister, Copic Markers - YG61, YG63, YG67.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Create a heavy white card base measuring 5 1/2 x 5 1/2 inches. Cut pink cardstock at 5 1/4 x 5 1/4 inches. Cut the Designer paper at 5 x 5 inches and sponge the edges using Vintage Photo Distress Ink. Adhere the layers using double sided tape.

Die cut nesting hearts from the Eyelet Hearts Die using red and pink cardstock and from the Heartfelt Love designer paper with the sentiment as shown on the card. Adhere the hearts with Dries Clear Adhesive. Attach the heart to the card using mounting tape.

Stamp petals from the Classic Rose stamp set using Memento Rose Bud Ink. Gently mist the petals and shape with the Deluxe Flower Shaping Kit. Adhere the petals using Dries Clear Adhesive. Apply Dries Clear Adhesive to some of the petals and sprinkle with Crystal Clear Glitter.

Using Olive Grove Ink, stamp some of the leaves on Art Foam and some on paper using Classic Leaf and Open Leaf stamp set. Die cut with the Classic Leaf Die Set. Sponge with Olive Grove Ink. Add some YG61, YG63 and YG67 Copic Markers.

Adhere the leaves and flowers with a hot glue gun to complete the card.

Other Products: Ranger Silver Embossing Powder, Heart of Gold Prills, Versamark ink, Heat Gun, Craft Knife

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut a piece of white cardstock at 12" x 6", score at 3 1/2" x 8 1/2" and fold to create the gatefold. Using the cutting edge of the HCD1-7161 Sweetheart Borders Die cut both ends of the card. Die cut the lacy die and adhere it to the sides of the card with dries clear adhesive.

To make the leaves on the front stamp the leaf images from the HCPC3753 Classic Rose Vines Cling Stamp set in Tuxedo Black ink. Sponge the leaves with Bamboo Leaves and Rhubarb Stalk inks and die cut with the coordinating die. Shape and adhere to the front of the card as shown.

To make the flowers stamp the images from the HCPC-3752 Classic Rose Cling Stamp set in Pearlescent Coral, sponge the centres with Cantaloupe inks and die cut. Shape the flowers using the HCST1-401 Deluxe Shaping Kit and assemble as shown and adhere to the leaves on the front as shown.

Stamp the bride and groom image from the HCPC-3789 Classic Wedding Bells Cling stamp set using Tuxedo Black on white cardstock and die cut with the coordinating die. Colour the groom's clothes with Tuxedo Black using the Dove Blender pen. Adhere above the flowers on the right fold as shown.

Cut a piece of white organza ribbon approximately 24". Using a craft knife cut a small slit in the folds on both sides and thread the ribbon through. Cut a piece of the pink heart patterned paper as 6" x 5 7/16" and adhere to the centre of the card. Cut the outer semi circular die from the HCD1-7144 Decorative Medallion Die from white cardstock and then die cut the decorative die and adhere to the top of the base die. Adhere to the top of the card as shown.

Stamp the image from the HCPC-3803 Banners of Love Stamp set in versamark ink and heat emboss with Silver embossing powder. Colour the image in with Bamboo Leaves, Pearlescent Coral and Cantloupe inks and die cut with the coordinating die. Adhere to the centre of the decorative medallion die as shown.

Die cut the dark pink patterned paper with the second largest Eyelet Heart die from the HCD1-7162 Eyelet Hearts Die and adhere to the centre of the card. Stamp the sentiment from the HCPC-3804 Heartfelt Love Sentiments Stamp set with Versamark ink and heat emboss with silver embossing powder on white cardstock. Die cut the heart using the next size down plain heart die from the HCD1-7162 Eyelet Hearts Die and adhere to the eyelet heart as shown in the middle of the card.

Other Products: Pearl White Metallic Cardstock, Big Shot Plus Die Cutting Machine, Misti, Hot Glue Gun

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: Card size is 6” x 6”. Cut Pearl White Metallic cardstock 12” x 6” and score at 6” to create card base. Cut the pink designer paper from the Heartfelt Love Paper Collection 5 7/8” x 5 7/8” two times. Ink the edges with Lilac Posies Ink and adhere to the outside and inside of the card base with Dries Clear Adhesive.

Cut the Sweetheart Borders Die two times from the Pearl White Metallic Cardstock. Adhere to the card base with Dries Clear Adhesive as shown.

Stamp the Classic Roses on white cardstock with Lilac Posies Ink. Color with the Lilac Posies and Cantaloupe inks, Cut with the coordinating die, spray with water and shape with the Deluxe Flower Shaping Kit.

Stamp the Classic Rose Vines on white Cardstock with Bamboo Leaves Ink, color with Bamboo Leaves and Lilac Posies, cut with the coordinating die, spray with water and shape with the Deluxe Flower Shaping Kit. Add Dries Clear Adhesive to the roses and vines using a sponge and then sprinkle with Crystal Clear glitter.

Stamp the Banners of Love Cling stamp on pearl white metallic cardstock with Lilac Posies ink. Use the Dove blender to color the flowers with Lilac Posies and the leaves with Bamboo Leaves ink. Using dries clear adhesive, add Lettuce Entertain You Prills to the centers of the flowers. Add Dries Clear Adhesive to the flowers and leaves using a sponge and then sprinkle with Crystal Clear glitter.

Adhere the roses, vines and banners to the card base with hot glue gun as shown.

Other Products: White Card Stock, Pink Card Stock, Red Card Stock, Glitter Card Stock, Vellum, Brilliance Ink - Watering Can, Versafine Olympia Green Ink, Versafine Crimson Red Ink, Crystal Clear Glitter, Ribbon, Trim and Bling from my stash and die cutting machine.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Start by cutting the Gift Of Love Box Die 6 times out of white card stock, fold on the score lines and attach the tabs together using Dries Clear Adhesive. To make the top and base, simple trace out the pattern using the lantern as a template. Before I closed the box I fastened Vellum to the inside of the panels to diffuse the light.

Once the box is assembled, decorate each panel with die cuts from the Eyelet Hearts Die out of a combination of red and glitter cardstock.

The Classic Rose flowers were stamped on white card stock using Watering Can ink and die cut with the matching dies before distressing with Pearlescent Orchid ink and shaping with the Deluxe Flower Shaping Kit.

The leaves and leaf flourishes were stamped on white card stock with Versafine Olympia Green ink and die cut with the matching dies before distressing with Bamboo Leaves ink.

The sentiments were stamped on white card stock with Versafine Crimson Red ink and die cut with the Luggage and Tags Die before lightly distressing with Rose Bud ink and dusted with crystal clear glitter.

Don't forget to finish off your project with a handle! Take a piece of pink card stock 3/4" x 8" and using the Eyelet Hearts Die, die cut to reveal the little hearts. Once you have finished the die cutting, line the back with a piece of red card stock to let those lovely little hearts show through.

Other Products: White and Pink cardstock

To see how to shape the lily, watch the video at https://youtu.be/Pnu_xqlx060.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Prepare a card base 5 1/2 x 7” and top that with a piece of the pink cardstock and the Heartfelt Love paper having each piece 1/4 inch smaller than the last.

Use the Sweetheart border die and cut it out of white cardstock, layer it on top of another piece of white. Cut another piece of pink about 2 inches wide and 6 inches long and top that with a smaller piece of the Heartfelt Love paper. Find the sentiment tag you wish to use, cut out and layer it on another piece of pink. Adhere everything on the card base as shown.

Stamp the leaves and flowers on white with the Tuxedo Black, color the leaves with the Bamboo Leaves and the flowers with the Cantaloupe and Pearlescent Orchid. Shape, add stamens to the center of the flowers, and adhere to card. Cut out the hearts, layer and add to card. To finish off add Crystal Clear to flowers and leaves.

Other Products: Spellbinders 5 x 7” Detailed Scallops, Stazon Forest Green, Foam tape, Glue Gloss, Centura Pearl White cardstock

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

or more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Card size is 5 x 7”. To make the base card, cut two large detailed scallop cards from the Centura Pearl cardstock. Score along the edge of the scallops on one of the pieces and adhere to the base by adding Dries Clear glue to the scallops to make a hinged card.

Cut the panel from the paper collection and die cut the oval using the HCD1-7157 Eyelet Oval & Basics Large Die from the centre of the card. Sponge the edges of the frame with Lilac Posies ink and adhere to the base card with foam tape. Adhere the inner oval to the card using Dries Clear glue.

To make the flowers stamp the images from the HCPC-3773 Flowering Dogwood Flowers Stamp on the foam paper with Lilac Posies ink. Sponge the centres of the flowers with New Sprout ink and die cut with the coordinating dies. Sponge gently on the edges of the flowers with Lilac Posies ink. Heat the foam and shape using the Deluxe Flower Shaping kit. Adhere the flowers together with Dries Clear glue and leave to set. Add Crystal Clear to the petals with glue gloss. Pierce a hole through the centre of the flowers and add the stamens. Glue around the base of the flowers before trimming the stamen ends and add to the card as shown.

To make the leaves stamp the images from the HCPC-3773 Flowering Dogwood Flowers Stamp on the foam paper using the Forest Green ink and die cut using the coordinating die. Sponge the leaves with the Lime Pastel ink. Heat and shape using the Deluxe Flower Shaping kit and add around the flowers as shown.

Other Products: Dovecraft red Ink shading pad, Extra strong tacky glue, Double sided tape, String Pearls, Peeled Paint Distress Ink, White card, Grey Board, Impress Emerald Green Ink pad, Impress Dye Ink Pad Old Rose, 3d Foam Pads, Die Cutting Machine, Paper Trimmer, Coloured Pencils

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the Blushing Rose collection, watch the tutorial at https://youtu.be/HVQjbz25S2I.

Instructions: Cut 3 Peices of Grey Board 2 at 7.5x8.5" and 1 at 3x 8.5" Bind these together with White card stock and add Page spine - see tutorial here. Cut 3 panels of paper from the Love paper Collection to cover the front, 2 at 7.25 x 8.25" and 1 at 2.75 x 7.25. Glue these into place. Place Pearls over the Spine and overlap the Front and Back Cover. Cut 3 Sweetheart Border Die and place one in the Center and one either side, trim off excess. Stamp out Forever Love Background Stamp in Red and trim paper down. Distress the edges with a scissors and Ink. Glue this one at an angle with 3d Foam Pads. Decorate the front with the Blushing rose collection and Classic Rose Collection as well as the different elements from the Classic Love collection.

Stamp the classic roses with Old Rose Ink, color and cut using the coordinating die. Stamp the leaves with Emerald Green, color and cut with the coordinating die. Shape using the Deluxe Flower Shaping Kit. Create the roses and add to the front cover.

Cut 5 Sheets of White cardstock at 7.25 x 8.25" (pages) and 10 pieces of 4x 7.25 (pockets) Run these with the Sweetheart Edge die through your Die cutting Machine. Glue the pages into your album and decorate with the Love papers. Add your pockets with glue to each page and Decorate with Papers, Eyelet Hearts Die, Classic Rose Cling Stamp Set, Heartfelt Love Sentiments Stamp Set. Make lots of photo mats using the Eyelet Hearts Die as Decoration.

Other Products: Aged Mahogany Distress Inks, Dimensional Tape, Dark Mauve, White and Green Cardstock

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: I started with a 4 1/2 X 9 piece of dark mauve cardstock and folded it in half. Lay your Eyelet Hearts die with the top peak of the heart above the fold line. Tape it down and run through your die cut machine. Next using the same color cardstock cut out one of the hearts and then glue it over the folded heart piece with Dries Clear Adhesive. Next, I took the next smallest of the eyelet hearts and cut out a piece of white cardstock. Then using the largest plain heart die cut out a piece of patterned paper and glue these two pieces together. I used dimensional tape to glue it to the card front.

Next I stamped the banner with Aged Mahogany Distress ink and then I stamped the sentiment. Use the corresponding die to cut out the banner. Using Dimensional Tape to adhere it to the card front.

Using the Rich Cocoa Memento Ink, stamp the flower petals on a piece of the paper collection and the leaves on a piece of green cardstock. Using the corresponding dies cut out the flowers and leaves. Color the center and the edges of the flowers with the Aged Mahogany ink, and use the Deluxe Flower Shaping kit to shape the flowers and leaves. Decide where you want everything and glue down the leaves and flowers around the banner. The card is finished.

Other Products: White and Pink Cardstock. Bling on a String, Hot Glue Gun, Dimensional Tape

Watch a video on using the Deluxe Flower Shaping Kit to shape flowers: https://www.youtube.com/watch?v=rdsIOVMXjIQ

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: My card is 4 1/4 X 5 1/2". Make the card base and then cut a piece of the paper collection to cover the front of the card. Using the Rosebud Memento ink, stamp the Forever Love background stamp on the paper and glue down on the front of the card with Dries Clear Adhesive. Next cut out the Eyelet die and glue this piece to the edge of the card front. Hot glue the bling on a string down the edge of the eyelet piece for a bit of interest.

Next using the Rosebud ink, stamp the sentiment onto a piece of pink card stock. Cut it out using the Sweetheart Border Dies. Cut out a heart with the eyelet border using white cardstock. Glue the pink heart to the white heart and then using dimensional tape, glue the heart to the front of the card.

Using Rich Cocoa Memento ink, stamp the flower petals and leaves. Cut out with coordinating dies. Color the centers of the flowers with New Sprout Memento Ink and do the edges of the petals with Rosebud ink. The leaves are colored with New Sprout Memento ink and edged with Bamboo Leaves Memento Ink. Spray water on the back of the flowers and leaves and use the Deluxe Flower Shaping Kit to shape. When dry add the prills to the flower centers and set aside to dry. Once dry you can decide on the placement for the flowers and leaves and glue down.

Other Products: Paper trimmer, scoring board, Hot Off The Press Template heart triple easel card, Stampin Up Early Espresso ink, Stampin Up Powder Pink ink, Stampin Up Garden Green ink, Stampin Up Rose Red ink, foam tape

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view the inside of this project see here. I used a triple easel heart card template http://www.paperwishes.com/products/4107434 to form the base for this interactive heart triple easel card. When the first layer is lifted another layer is revealed. Trace and cut the small, medium and large card base from white cardstock.

Die cut a total of ten descending size hearts from Heartfelt Creations Heartfelt Love paper collection with the Heartfelt Creations Eyelet Hearts die.

Stamp, die cut and color the flower arrangement and just for you banner from the Heartfelt Creations Banners of Love stamp and die sets in Early Espresso ink onto white cardstock. Color with Powder Pink, Garden Green, and Rose Bud inks. Sprinkle Minnie Pearl prills and Hot Mama Prills into the middle of each stamped flower.

Cut from the Heartfelt Creations paper collection in the follow sizes and quantities: 1- 2 inches x 2 inches, 2- 1 inch x 2 inches, 1- 3 1/2 inches x 3 3/4 inches, 2- 2 inches x 3 1/2 inches, 1- 4 inches x 5 1/4 inches, and 2- 2 3/4 inches x 4 inches.

Once all the prep work is completed, the card is assembled. Place glue on the large heart card base front section just below the score line. Attach the three largest heart cluster with the Just for You stamped image arranged in the smallest of the three-heart cluster, aligning with the point on the lower edge. Repeat this same procedure for the medium and small heart clusters and stamped images. Open the large, medium and small card bases and glue the corresponding sized cut papers to the sections with dries clear adhesive. After adding all the necessary hearts and paper to the individual card bases, open the large card base and glue the medium base centered on the large base aligning the bottom edge. Open the large and medium card bases. Glue the small card base centered on the medium base, aligning the bottom edges. Open the small heart card base and foam tape the smallest heart cut centered 1/4 inch from the bottom edge.

To display the card, open the largest heart and tuck it behind the medium heart card base so it stands up upright. Open the medium heart card base and tuck it behind the small heart card base, then open the small heart card base and tuck it behind the smallest foam raised single heart in front.

Other Products: Versamark ink, Clear heat embossing powder, Versafine Black, Smooth white cardstock, Distress inks Spiced Marmalade and Picked Raspberry, Mini Mister.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Side fold card measures 6” x 8”. Cut a piece of smooth white cardstock measuring 5" by 61/2". Smush Spiced Marmalade and Picked Raspberry on a craft sheet and sprinkle a little water using a mini mister. Place the paper face down to lift the colors. Use heat tool to dry. Repeat this process until you are happy with the color.

Ink Forever Love Background Stamp with Versafine Black and stamp the image in the center. Sprinkle with Clear Embossing Powder and heat set. Distress all the four sides with scissors to give torn effect.

For Butterflies, on a piece of vellum, stamp the butterfly images from Butterfly Medley Cling Stamp with Clear VersaMark ink and Sprinkle with White embossing powder. Heat set and cut them using their coordinating dies.

For the heart embellishment, cut 2 white frames using Eyelet Hearts Die. Adhere a white die cut from Sweetheart Border dies behind the top layer using an adhesive that dries clear. Add glue dots and fix the second frame on the back. Stamp a few floral images from Banners of Love Stamp Set using black Versafine and cut them using their coordinating die. Arrange the heart frame as shown. Since the background is colorful, stamped florals are kept white so that they can pop in the background.

Glitter the torn edges of the colored panel and the images on heart frame with Crystal Clear Glitter using Adhesive that dries clear.

Layer the top panel first on white cardstock measuring 5 1/4" by 6 3/4" and then on ready side fold card. Add white border die cuts between the layers as shown and also add vellum butterflies to add an extra accent to the card.

Other Products: 6x9” Office Envelope form Hobby Lobby; seam binding; trinket pins; Foam adhesive; chipboard; Zig marker: 41,43,26,29,53; vermillion archival ink; coffee archival ink; white cardstock; black archival ink; Diamond Dust; Wink of Stella clear pen; Canson water color paper

For more tips on creating with the Wildwood Cottage collection, watch the tutorial at https://youtu.be/g8WLXE8hLRk.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Begin by covering the back of the envelope with a piece of 6x9” black chipboard to give the envelope stability. Choose three papers from the paper collection and cut them to base: 6x9”: second 5.75" x 8”; third 5.5 x 7.5”. Edge distress these and attach to the base. Die cut four hearts starting at large eyelet; two in white and two in pattern, you can choose. I used the dark red polka dot; the pink gingham and the small pink heart paper. I fanned these out across the envelope base to create layers. Ink edges with vermillion archival ink.

Die cut the sweetheart border die on white cardstock wide enough to create a fold over edge. Also die cut the shadow. Adhere these two together with dries clear adhesive and attach to back of envelope so you can create an envelope flap. Detail with crystal clear. Stamp using black Archival ink and die cut two of the flower spray from the banners of love Set and color with zig markers. Die cut and set in between the four hearts.

Stamp and die cut the Just for you banner using black archival ink. Color the flowers and leaves on banner with zig markers. Use the Wink of Stella pen on the banner itself. Stamp and die cut the three flower sets from the wildwood florals 3 times using Coffee Archival ink, color these with zig markers. Stamp and die cut 2 sets of the classic rose vine using Coffee Archival ink and color with zig markers. Mold the vine and flowers and attach the pearl stamens. Use diamond dust to detail. Wrap seam binding around and attach trinket pins in the knot of the bow. Complete as shown.

Other Products: ColorBox Fluid Chalk Ink Pad - Cheeky; Art Glitter Ultrafine Transparent - Ensalada; Art Glitter Transparent - Baby Baubs; Want2Scrap 72 Count Pearls - White; Want2Scrap 72 Count Pearls - Pink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Create a 6" x 6" top folding card base out of white cardstock. Cut a 5 3/4" x 5 3/4" piece of design paper from the Heartfelt Love Paper Collection and sponge edges of design paper with Berrylicious Chalk Ink. Adhere design paper directly to the white card base with Dries Clear Adhesive.

Take the Sweetheart Borders Die and die cut a piece of white cardstock. Lightly sponge die cut with Cheeky Chalk Ink. With Dries Clear Adhesive add Baby Baubs Glitter and then White and Pink Pearls as shown. Adhere die cut to card front as shown.

Die cut the pink design paper with the 2 1/4" heart die from the Eyelet Hearts Die set and sponge edges with Cheeky Chalk Ink. Matte pink die cut heart on white cardstock that has been die cut with the coordinating scalloped heart die.

With Dark Brown Chalk Ink stamp the "Valentine's Day" sentiment from the Heartfelt Love Sentiments Stamp Set. Adhere entire heart die cut image to card front as shown with pop dots.

On White Cardstock with Tuxedo Black Memento Ink stamp the flower image from the Banners of Love Stamp Set twice. Using Stack and Store Daubers and Fantastix as needed, color the flowers using Cheeky and Berrylicious Chalk Inks and the leaves using Lime Pastel and Guacamole Chalk Inks.

Shape Flower images using the Deluxe Flower Shaping Kit. Cut apart and layer large flower and adhere all flower pieces as shown around heart image.

With Dries Clear Adhesive add Tutu Pink Prills to flower centers, Minnie Pearl Prills to baby's breath, Ensalada Glitter to leaves and Baby's Breath Glitter to flowers.

Adhere medium sized white and pink pearls to lower left hand corner of card, as shown.

Other Products: Cardstock (White, Red, Pink), Stampin' Up Ink- Early Espresso, Pink Pearls, Scrapbook Adhesives by 3L (3D Foam Squares, E-Z Runner Grand, White Creative Photo Corners, Adhesive Dots- Micro)

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: White cardstock is the background. Cut a strip of the chevron patterned paper that is 5” wide and find and cut out the 2 pink border strips. Cut a strip of the pink heart patterned paper that is 3” wide. Adhere these layers down the middle of the white cardstock. Die cut 2 of the decorative Sweetheart Borders from white cardstock. Adhere on either side of the layout border. Add pearls to the die cuts.

Cut out the 2 pink decorative borders from the red polka dot patterned paper. Adhere to the top and bottom of the layout. Add pearls to the very middle of the borders.

Mat the large photo in white and light pink. I added white photo corners to the photo. Adhere to the layout using 3D foam squares. Stamp the small banner and “Hey Gorgeous” sentiment on white cardstock using Early Espresso brown ink. Die cut out the banner, and cut a second banner from red cardstock. Adhere the two together just slightly off set. Adhere to the layout just above the matted photo using 3D foam squares.

Find the heart die that will best suit your photo. Cut out the photo. Die cut the small scalloped heart from white cardstock and the large scalloped heart from red cardstock. Adhere the photo to the white cardstock layer. Adhere that to the red layer using 3D foam squares. Adhere to the layout again using 3D foam squares.

Other Products: Archival ink-Rose madder, Buttercup, Plum, Fern Green, Jet black, Glossy accents, White cardstock, Zig Clean Color Real Brush Markers 

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Cut a 5 7/8" x 5 7/8" piece of pattern paper from Heartfelt Love Paper Collection and adhere it to 6" x 6" white card base with dries clear adhesive.

Cut one die each from Sweetheart Border Die using white cardstock and paste them on the card base as shown. For the bottom Die don't paste the centre part of the die as the heart die will be inserted.

Cut one eyelet heart shaped die and then stamp forever love background using rose madder archival ink and adhere it with foam tape behind the sweetheart border die.

Stamp one banner with sentiment-Just For You with jet black and plum mixing two archival ink and color them with Zig Clean Color real brush using-Light green, pale green, light pink, tea rose and then sprinkle randomly crystal clear and adhere this sentiment on the right side.

Stamp five sets of classic rose with archival ink-rose madder and cut them with coordinating die and color them with rose madder, buttercup and fern green archival ink and shape them with Deluxe Flower shaping tool kit and sprinkle crystal clear. Stamp Rose Leaves from the same cling Stamp set with jet black archival ink and color with fern green and rose madder and shape them too. Randomly use 3D stamp paint-gold on the leaves and use designer dries clear adhesive to paste the rose and leaves on the bottom left side.

Other Products: Hot Glue Gun, Embossing Tool, Recollections Foil Paper, Silver Trim, Westcott Trimmer, Scissors, Copic Sketch Pens: RV11, RV13, RV09

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: To view a larger photo of this project see here. Take your gift box die cut with the white cardstock and cut 4 panels. Once done you will adhere each of the panels to one another to form the gift box.

Once your gift box is complete. You will take the sheet of patterned paper and die cut 4 square panels and adhere these to each side of the box with Dries Clear Adhesive. For the panel overlays you will die cut 4 decorative trim panels and adhere these over the top of the 4 die cut panels you did with patterned paper.

To create the flowers take the Memento Dye Ink in black and stamp three sets of the Flowering Dogwood stamp. Then color each of the stamped images using your copic sketch pens using: RV11, RV09 and RV13 for the flower petals. Once done spritz with water for easy molding and pinch each petal to shape. Once complete place some hot glue in the flower centers then add the bright pink stamens to each of the centers. Then layer two flowers staggering them onto one another for a complete look.

Now die cut the trim in white cardstock using the Eyelet Heart die set. You will need two sets and then adhere to the top section of your gift box. To finish off your box add the silver trim and fussy cut the “Let’s Celebrate” sentiment from the sheet of patterned paper.

Other Products: Archival Inks-- Jet Black, Plum, Rose Madder, Leaf Green, Library Green, Carnation Red, Glossy Accents, maroon card stock

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: The card base is 7" x 5". Cut a piece of white card stock 10" x 7" and score at the 5" mark on the longer side . Fold to make the card base.

Cut a pattern paper from the Paper collection to make the mat layer . This is 4.75" x 6.75". Cut a journal card from the paper collection and mat on maroon card stock with designer dries clear glue and cut along the sides leaving a 1/4 " margin on all the sides.

Cut a sweet heart border in white card stock and adhere at the base of the card front. Adhere the journal layer slightly tilted on the top with foam strips. Stamp the Love sentiment stamp in Carnation red ink and cut with coordinating die. Adhere the letters on a strip of card stock on the right part. Apply glossy accents on the letters.

From the Dogwood collection, stamp the dogwood branch in black ink and cut with matching die. Colour using Stack and Store daubers with plum and green colours. Shape with the Deluxe Flower Shaping kit. Stamp the dogwood flower in leaf green ink and cut with coordinating die. Colour with Rose Madder and plum. Shape with the Deluxe Flower Shaping kit and add stamens. Similarly make leaves from the classic Rose set. Stamp the rose filler flowers in leaf green ink, cut and shape the filler flowers also.

Arrange the dogwood branches on the top left and at the bottom right of the card front. Add the dogwood flowers and the leaves. Finish with white filler flowers.

Other Products: Crystal (sos store), Bling on a roll small and wide, small flat back pearls, Bling Letters, Glitter sticker nr.2, Internet images lady & Butterfly, Feather, Pearl pen white, row of small silver beads, cardboard, Distress Ink Vintage photo, Tule, Versafine Black, Cutting knife, paper trimmer, ruler, pencil, glue gun, empty match box, tape, score board, cardstock crème and white, silver embossing powder, heat tool, Versamark ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, click here. First start with making construction strips, take a piece of white cardstock 12 x 12" and cut this in strips of 1" wide and 12" long score them in half and put on the back side of the strip on both 1/2 inch parts tape, then fold them in half. Use the Template from My blog http://elsschutte.blogspot.ca/p/heartfelt-creations.html and draw the outlines with a pencil on the cardboard and cut this out with a knife. For the sides you have to cut a long piece of 1 1/2" wide, now measure the sides of the bottle and make marks on every corner and cut them in with your knife (not all the way through, but just that you can bend them). Now you can use the construction strips to connect the side with the front and back, put 1 half of the strip on the front or back and then connect the side strip on the other half of the strip. The Bottom of the box stays open.

When the box is done you can cut out your pattern paper - you can use the template of the bottle for it. Ink all the sides with Vintage Photo and glue the paper on the bottle. Also cover the matchbox with pattern paper and ink the sides with the same ink, and glue this part on the top. I found a nice piece of Crystal in the SOS store and I glued that on top. Around that, glue a string of silver beads around the crystal and on top of that you can glue a Butterfly. I put Crystal Clear on the wings of the Butterfly. Around the matchbox you can attach a string of bling on the roll, the wide one, I also did this on the Bottom of the Bottle. Around the sides of the Bottle I used the small one.

Embellish the box: Fussy cut the image of the lady (or any image you like) and glue this on the bottle, adhere small flat back pearls on her neck and ear. Stamp the word Love from the banners of love set on Crème cardstock with Versamark ink, add silver embossing powder on it, heat set. Diecut with coordinating dies and adhere. I added crystal letters stickers under this. Now stamp the classic rose vines, with the Versafine black on white cardstock, and color them with Bamboo Leaves, New Sprout and Vintage Photo. Die cut with the coordinating die, and shape using the Flower shaping kit. Stamp some dogwood flowers on white cardstock with The Rhubarb Stalk ink and color lightly with Rose Bud and New Sprout inks. Die cut and shape. Add some Crystal Clear, pierce the centre and insert stamens in the centre. Die cut Classic Rose, on white cardstock using 5 big petals to make the big rose and 5 small petals to make the small rose. After each layer color the back of the rose, and when the rose is finished you can ink the top of the rose with the Rose Bud and Rhubarb Stalk inks.

Die cut the Window Box filler flowers on white cardstock. Cut the flowers off the stems, and shape, dot the centre with a pearl pen, allow to dry. Stamp some curly leaves from the Tropical Paradise set with black Ink on white cardstock. Color with the Bamboo Leaves ink and die cut. Die cut the Sweetheart Borders Die on cream cardstock and cut apart into smaller pieces, as desired.

To assemble in this order: Start rose vines, tule, roses, dogwoods. In between the flowers you can fill in some spots with the other flowers and leaves you made, so then you have a nice arrangement. In between you can use the cut a parts of the border die and adhere those under the ends of the arrangement. Add dots using the pearl pen. I added a feather, border die piece and dogwood flower to the hat. For the bottom you cut a piece of cardboard 6 1/2 x 2 1/2" and decorate with designer paper. Cut 2 pieces of cardboard of 3/4 x 1" and 2 pieces of 3/4 x 4 3/4", decorate them with pattern paper and glue them together in the center of the bottom, now you have a little box. Ink all the edges with the Vintage Photo and the Bottle will fit over it.

Other Products: Mowed Lawn & Worn Lipstick Distress inks, Versamark Ink, Sizzix Tropical Paisley Embossing Folder, Koi Waterbrush, Ebosser, watercolor cardstock, Clarity Stencil Brushes, Pick me Up & rhinestones.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE

Instructions: Take a 4 1/4" x 5 1/2" white card base & ink it with Mowed Lawn Distress ink using Clarity Stencil Brush. Keep the ink application heavy on the left side & light on the right side to get an ombre effect.

Die cut a piece of white cardstock using the border die from Sweetheart Borders Die & ink it with Mowed Lawn Distress ink using Stack and Store Daubers. Adhere this to the card front on the left side.

Stamp the LOVE & flower images from Banners of Love Background Stamp Set with Versamark Ink on watercolor cardstock & heat emboss using Ranger Gold Embossing Powder & Ranger Heat-it-tool. Die cut them using matching dies from Banners Of Love Die. Die cut few more pieces of white cardstock using the same dies. Color in the images using Mowed Lawn & Worn Lipstick Distress ink pads & Koi Waterbrush.

Die cut 2 eyelet hearts & 2 plain hearts of different sizes from white cardstock using Eyelet Hearts Die. Emboss the plain hearts using Sizzix Tropical Paisley Embossing Folder. Ink all the 4 heart die cuts lightly with Worn Lipstick Distress inks & Stack and Store Daubers.

Cut apart the floral images. Stack the similar die cuts to make faux chipboards. Arrange & adhere all the images & hearts as shown using foam adhesive where necessary. Add some rhinestones to the die cuts using Pick me Up for finishing touch.

Other Products: Zig Brushes , Archival Ink (Vermillion, Leaf, Library Green, Plum), Distress Ink (Picked Raspberry, Crushed Olive), glue gun, Foam tape, double sided tape, mini mister, Sizzix , Trimmer, Acetate Sheet , Sequins.

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Click here to view the inside of the album. Start by taking a white Flip Fold Insert E. For the basic first layer cover of the album, cut pattern paper from the paper collection 1/8" smaller than the base of the album. Repeat the same for the inside folds also. For this album all the pattern papers are matted on a black cardstock. For the waterfall repeat the same, die cut sweetheart borders and add to all the edges.

Die cut several pieces of border from border die using white cardstock. This is used as a bellyband for the inside of the album to hold journaling cards, photographs, message, etc. For the message and journaling card, all are matted with black cardstock.

Die cut several nesting hearts from the Eyelet Hearts Die using some pink pattern paper from the Heartfelt Love designer paper and stamp with the sentiment as shown on the card. Die cut more harts to create a frame, adhere all the hearts together with Dries Clear Adhesive and back with acetate heart which will form a shaker. Leave a small opening and fill the shaker with some sequins. This will form one of the elements of the Bellyband for the mini album.

A bellyband is used as a closure for the mini album which is created using parchment paper. To embellish the bellyband, stamp and die cut some Dogwood flowers along with Classic Rose Leaf. Using Plum and Vermillion Archival ink, color the leaves and flower petals. Once all are colored each one of them are shaped and stamens are added for the centers. The flowers and leaves are also sponged with dries clear adhesive and dusted with some Crystal Clear. The flowers, shaker hearts along with some stamped images form the cluster to adorn the closure.

The album flap is also adhered with a series of regal borders to add the final touch to the mini album.

Other Products: Smooth White Cardstock, Versafine Black ink, White heat embossing Powder, Versamark ink, Twine, a small piece of black cardstock, mini mister, Spiced Marmalade, and Picked Raspberry Distress Inks, hot glue. Archival inks in Plum, Library and Leaf green.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: Create a 5 3/4" x 7 3/4" white card base. Cut a piece of smooth white cardstock measuring 5 1/4" by 7 1/4". Smush the Picked Raspberry and Spiced Marmalade Distress inks on a craft sheet and spritz with water. Place the cardstock face down to pick up the colors and dry with heat tool. Keep repeating this process until you are happy with color. When dry, cut the paper diagonally so that it is 6 1/2" on one side and 3 1/2" on the other side. Adhere a white border die cut from the Sweetheart Borders Die behind the cut diagonal edge. Cut another piece of white cardstock 5 1/2" x 7 1/4" and score at every 1/8". Adhere the diagonally cut paper to the scored paper with dries clear adhesive.

To create a background, stamp floral images from Banners of Love Stamp set multiple time using black Versafine and cut using their coordinating dies. Also, stamp and cut letters from the word LOVE. Adhere the stamped images neatly using an adhesive that dries clear. Trim the images if necessary.

Stamp the Classic Rose with Plum archival ink and color with Picked Raspberry. Cut with the coordinating die and shape using the Deluxe Flower Shaping Kit. Stamp the leaves with Library green ink, color with leaf green and cut with the coordinating die.

For the Bow, take a 2" wide long strip of white cardstock and cut the border on both sides using the Sweetheart Borders Die. Mark the center point and trim the center a little from both sides. Fold both the sides as shown and glue the edges in the center with dries clear adhesive to form a bow. Add a small twine bow and a small rose flower to the center for extra accent.

For the LOVE hanging, Stamp and cut the alphabet once using black Versafine and 3 times cut the alphabets without stamping. Glue all the layers together, keeping the stamped one on the top, taking care to leave a small space open on the top. Now glue the ends of 2 pieces of 4" long twine with the help of glue gun. Tie the hanging from the center keeping all the letters at different levels. Attach the hanging behind the bow using hot glue.

Once the front panel is ready, layer it on the side fold card with 3D dots.

For the sentiment, stamp with Versamark ink on black cardstock, and heat emboss with white embossing powder. Add small rhinestones in the center of flowers to add a little shimmer.

Other Products: Black Archival ink, Dark Green Archival ink, light green pigment ink, Martha Stewart scoreboard, white pearl cardstock, iron or heat tool, adhesive, hot glue gun, gallery oil soft pastels (202, 209, 206), white embossing powder, VersaMark

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: Take a 8 1/2 x 11" white pearl cardstock, score and fold at 5 1/2". This will be your card base.

Select paper from Under The Sea Paper Collection and cut into size of your card base leaving a 1/16" border and Using VersaMark stamp sentiment from the Heartfelt Love Sentiments Stamp Set and add white embossing powder and heat set with the heat tool. Place on the card base.

Select paper from Under The Sea Paper Collection and cut it out using the Sweetheart Borders Die and adhere it to the card base using 3d foam tape. Cut two sets hearts using Eyelet Hearts Die and adhere it with 3d foam tape.

To create flowers, stamp the Classic Rose Cling Stamp on foam paper with black Archival ink and cut using the coordinating dies. Colour with gallery oil soft pastels (202, 209, 206) using sponge. You will need two petals for each flower.

Use an iron or heat gun to heat the petals and then shape using your fingers.

Use a paper piercer to make a hole in the middle and pull through the green stamens from the Assorted Pearl-Small set. Add a little hot glue to the underside of the flower to adhere.

Stamp the leaves from the Classic Rose Cling Stamp on white paper with dark green Archival ink, colour using lighter green ink, cut out with the coordinating die and shape. Adhere the flowers and leaves to the card using a hot glue gun.