Instructions:

Cut two 5 x 7" size pieces of white cardstock. Cut another piece of white cardstock to 5 x 7 1/2", score and fold at 3 1/2 and 1/2". Attach this piece to one of the 5 x 7" pieces to create the card base. Cut another piece of white cardstock to 4 1/4 x 5 1/2" size. Stamp the 5 x 7" and 4 1/4 x 5 1/2" panel using the ‘For My Friend’ sentiment in Pink Peony ink to create a  sentiment background. Cut a green panel of 4 7/16 x 5 11/16" size from sheet 4B of the Floral Sentiments paper collection. Take the frame and center cutout die from HCD1-7460 Friend Floral Sentiment Die, laying the frame in the center of A2 size panel. Only attach the center cutout die, remove the main frame and diecut. Now lay the A2 panel on top center of the green panel to figure out the placement for cutting out same die piece. Diecut the center cutout die from green panel. Sponge the edges of A2 and 5 x 7" panels with Pink Peony ink. Attach the A2 panel on top of the coordinating green panel. Sponge around the opening of panel with Vivid Chartreuse ink and then also use Leaf Green on the top left and bottom right of opening. Sponge the Vivid Chartreuse ink in a rectangular shape on the 5 x 7" panel to create a backshadow for smaller panel. Using from the HCD2-7399 Flourish Companion Frame Die, diecut 5 of the smaller rectangle Frame from white cardstock. Use a yellow sponge and Dries Clear glue to attach 2 frames on top of each other and repeat this for 2 more of the frames to create sturdiness. Attach these frames at the top left and bottom right corners of 5 x 7" panel as shown. Now attach the panel onto bottom half of folded card front.

Stamp the frame sentiment from HCPC-31024 Friend Floral Sentiment Cling Stamp Set in a combination of French Ultramarine and Viridian onto Deluxe Flower shaping cardstock and diecut. Clean the stamp and reuse, this time stamping in Lighthouse ink, stamp off on scrap paper, then ink with Magenta Hue and stamp onto white cardstock. Repeat this again and diecut both frames, using both the outer and inner piece of die. Stamp the ‘For My Friend’ sentiment in a combination of French Ultramarine and Viridian onto white cardstock and diecut. Clean the stamp and reuse, this time in a combination of Magenta Hue and Pink Peony ink onto white cardstock and diecut.

Sponge the centers of florals with Sunflower ink. Sponge the leaves with Vivid Chartreuse ink and then use Leaf Green as well. Sponge the florals with Pink Peony and then Magenta Hue. Use the purple Zig marker along with blender to brighten up the color on the petals. Repeat this, using the pink marker. Use the light green marker and a light touch of the yellow on the leaves. Use a yellow sponge for thin application of the Crystal Lacquer over both floral frames. Add just a light touch of the Vivid Chartreuse over teal sentiment and the ‘Friend’ diecut. Add a light touch of the Pink Peony over the pink ‘Friend’ diecut. Use the shaping stylus to shape the floral frames. 

Attach the remaining decorative frame onto the center inside of card. Attach the pink sentiment onto inside as well. Sponge the inside edges of card with Pink Peony ink. Attach the teal sentiment onto front center of card area over which you’ll place the layered A2 panel using dimensional adhesive. Now apply the Dries Clear glue onto yellow sponge and dab over top left and bottom right corners of card, then sprinkle with Crystal Clear glitter. Attach the floral frame around opening as shown using hot glue. Attach the teal ‘Friend’ word onto sentiment. Cut off sections of the remaining frame and attach onto the top left and bottom right corners as shown. Use the Dries Clear glue along with the Mustard glitter to add a touch of sparkle over the floral centers.

Other Products: Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

My card base is a split 5" x 7" card base. Make 5 x 7" base using the Deluxe Flower Shaping Paper and cut the front at 1 1/2" to the fold line and at the 5 1/2" measurement to the fold line. Now we cover the base card with the pretty papers. The The two front flaps are covered with a piece of Sheet 6A of the paper collection. The inside front flap is covered with 5A. The inside of the card is covered with 3A as well as the Banner die cut that goes across the front.

Stamp the image twice, once in Leaf Green and once in Magenta Hue. Cut out with coordinating dies so the green image can lay on top of the Magenta Hue piece  Color the leaves with Vivid Chartreuse and set aside.

Stamp the flowers using Magenta Hue ink onto Deluxe Flower Shaping Paper. Cut out with coordinating dies. Color the centers and the edges with Magenta Hue Ink. Lay face down onto the mold, spritz with water and run through the die cut machine. Turn out onto desk to dry. Once dry, fill with Prills and set aside to dry.  

Use hot glue to glue down flowers onto the card and then glue to the middle flap of the card front. 

Stamp the sentiment using Magenta Hue ink onto a  piece of the Deluxe Flower Shaping paper and cut out using the coordinating die. Cut several of the words using cardstock and glue the layers together giving them added dimension. Cut a banner out of cardstock and also using the selected paper and glue these together. Glue to the two side flaps of the card front being careful not to glue anywhere except on the edges.  Glue the words onto the banner.

I cut a piece of white cardstock 3 3/4" x 4 3/4" and glued it to the inside of the card so it is hidden by the middle front flap of the card. This gives a place to write a message to the receiver of the card. The card is finished.  

Other Products: Die Cut Machine, White Cardstock, Hot Glue Gun

Instructions:

Fold a 12” x 5.5” piece of card at 6” to create a tent fold card. Place the largest rectangle frame die over the fold and die cut to create a shaped card base. Die cut the largest rectangle frame using white card and paper from the collection, layer and adhere to the card base. Die cut the largest decorative frame die using white card and adhere to the card base.

Stamp the grateful floral sentiment using melon mambo ink onto stamping card, cover with clear embossing powder, remove excess and heat to set. Colour using melon mambo, new sprout ink and yellow zig pen and die cut using the outer and inner die. Stamp the sentiment onto white card using rich coca ink and trim the rectangle to the edge of the sentiment frame, adhere the coloured die cut frame over the stamped image. Cut a rectangle from the clear cardstock, slightly smaller than the white rectangle card and adhere to the back of the white card.

Cut a rectangle of patterned paper, slightly larger than the sentiment frame and adhere to a slightly larger white rectangle of card, adhere together and adhere to the centre of the card base.

Stamp the sentiment onto paper from the collection using black ink. Cut to 3.5” x 4.5”, adhere to the centre of the card panel and place hot mama and go man go prills on the card in the centre. Add shaker foam tape around the die cut frame and adhere on top of the stamped sentiment to create a shaker.

Stamp the butterfly onto vellum using rich coca, die cut and add melon mambo to the edges of the vellum butterfly, add yellow zig to the area near the body to shade. Die cut the filigree wings, sponge over with dries clear adhesive and cover with baby's breath glitter. Shape the the vellum and glittered wings, adhere together at the top of the card using dries clear adhesive.

Other Products: Melon Mambo ink - Stampin Up!, clear embossing powder, shaker foam tape, white card

Instructions:

Cut a piece of white card stock to 6” x 8 1/4” and score at 3” to form a slim line card base. Now cut a piece of HCPP1-475 Deluxe Flower Shaping Paper using the HCD3-7448 Slim Ornate Rectangle’s Largest Die. Using the same die cut a piece from sheet 8B from the HCDP1-2151 Floral Sentiments Paper Collection. Attach the pink to the white and then both to the card base centering it in the middle of the shaped card front. (TOP TIP: The attaching of the card base can be saved until the end so that there is a flat surface to build upon.) Now using the second largest die from the Slim Ornate Rectangle set, cut 2x, once from white card stock and once from Luxe Silver Card stock. Using Dries Clear adhesive, glue the white frame on top of the silver layer slightly offsetting them so that the silver peeks out from behind the white. Adhere this to the pink base just attached to the card front in the previous step. Using the same die in the last step cut once more using a piece from sheet 6A which will create the inside piece needed for the green background piece. Glue this just inside the frame.

Now using a stamp positioner, stamp the sentiment from the HCPC-31023 Special Floral Sentiment Cling Stamp Set onto white card stock using Fuchsia and Pink Peony  Archival inks to create an ombre blend. Die cut with coordinating die. Using that same die, Cut 2x more with white card stock and 1x with Luxe Silver card stock. Glue the two white die cuts directly underneath the stamped image to give the sentiment extra height. Then leaving a drop shadow, glue the silver offset quite a bit. Using the 3rd largest die from the Slim Ornate Rectangle die set, trim to fit the sentiment and over lap one segment of the lattice and glue together. (16 open lattice squares across). Now cut a piece of white card stock measuring 4 1/4” x 1” and glue to the back portion of the frame. Cut down the inside die piece to fit the recess area and glue in place. This should give a strong foundation for the sentiment to be glued onto. Adhere together then attach to the card using 3D foam tape.

Stamp the large Special Floral Sentiment stamp 2x in Lighthouse Archival Ink. Stamp the small and medium HCPC-3986 Wild Poppy Cling Stamp Set flowers 6x with Lighthouse Ink, and lastly stamp the HCPC-3912 Cascading Wisteria Cling Stamp Set 2x in Leaf Green Archival ink, all onto Deluxe Flower Shaping Paper. Using ink brushes and HCDA1-449 Stack and Store Daubers, color in all of the flowers with Fuchsia and Pink Peony inks. Once colored, brush on some Crystal Lacquer with a paint brush and allow it to dry. Also color the leaves with Leaf Green and Vivid Chartreuse. Now die cut all items with the coordinating die sets making sure to use the inside die when cutting the Floral Sentiments out. All items are hand shaped using HCST1-401Deluxe Flower Shaping Kit. When building the flowers layer 3 petals together for the medium flowers and use the Pastel Pearl Stamen -Med for the centers. For the small flowers use 2 petals each and use the Pastel Pearl Stamen - Small for the centers. 

To assemble the card take the floral frames and snip off the top section that has the butterfly on it. Save at least one of the butterflies for the project. Adhere the frames around the outer border of the card. Add the cluster of flowers and leaves to one corner and attach the butterfly. Finish off the inside with a piece of the coordinating paper to match.  

Other Products: Stamp Positioner Tool, Detail Ink Brushes, Blending Brushes, 3D Foam Tape, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Cut a piece of white cardstock, score and fold to get a 8 1/4 x 5 3/4" base. Cut a piece of paper from the Floral Sentiments Paper Collection to 8 x 5,5", the other one to 7,5 x 5 1/16" and a little bigger piece of the white cardstock. Adhere them to the base. Stamp the sentiment with the Grateful Floral Sentiment Cling Stamp Set in Vibrant Fuchsia ink and cut it out with coordinating die. Stamp the sentiment with the Grateful Floral Sentiment Cling Stamp Set in Tuxedo Black ink, color it and cut it out with 2 coordinating dies. Cut out silver and white borders from the Curvy Decorative Border Die set. Adhere all elements to the base.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Vibrant Fuchsia and Pink Peony inks onto Deluxe Flower Shaping Paper. Color their edges and their centers with the same inks, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small stamens to all flowers. Stamp blossoms from Small Wild Rose Cling Stamp  in Pink Peony ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 5 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

For the card base take cream cardstock. It's a ready folded card measuring 9 by 6". Cut panel on cream card stock measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel from Floral Sentiments Paper Collection measuring 8 1/2 by 5 1/2" sheet number 6A, adhere this panel on the last panel using clear glue. 

Stamp the image from Special Floral Sentiment Cling Stamp Set on the cream card using leaf green ink 2x die cut the one image only with shadow die and other image with both coordinating dies without center sentiment, color this image using zig markers, shape a little bit from the back side using shaping kit and add this frame on the other image using hot glue. Apply clear glue randomly and sprinkle some baby's breath ultra fine glitter. Add this frame in the center of the card using dimensional tape.

Stamp the Wild Poppy Flowers on the Deluxe Flower Shaping Paper using Versamark Embossing Ink, cover with white embossing powder, heat it using heating tool, die cut using coordinating dies, color the centers with leaf green ink and color the poppy edges with Archival Vibrant Fuchsia Ink using dauber, shape the flowers using groove golf tool and Heartfelt Creations shaping kit and make few flowers using hot glue. Add green mini prills in the centers, embellish the flowers with Nida Tanweer Magic Glitter Powder.

Stamp the small Wild poppies with Vibrant Fuchsia on cream card, color the centers with leaf green ink, shape the flowers using golf groove tool and Heartfelt Creations shaping kit and make a few flowers using hot glue. Add green mini prills in the centers, embellish the flowers with Nida Tanweer Magic Glitter Powder.

Stamp the Wild Poppy accents on the deluxe flower shaping paper using leaf green ink and color the image with zig markers, die cut using coordinating dies, cover with Magic Glitter.

Arrange all ready elements as shownusing hot glue and embellish the card with Paper Magik Decorative Beads and Nuvo Drops.

Other Products: Cream Card Stock, Dimensional Tape, Nida Tanweer Magic Glitter, Versamark Embossing Ink, Paper Magik Decorative Beads, Hot Glue.

Instructions:

Prepare a white card base using the Flower shaping paper. Trim a piece of the Floral Sentiment paper (1A) slightly smaller, ink the edges with the Fuchsia Pink ink and adhere to the card.

Stamp the Friend Floral Sentiment on white card stock with the Stazon blazing red ink and cut out with the coordinating die. Adhere to the center of the card. Stamp the same imagine again in black and cut out with both the dies together. Color in with the  Zig Markers. Cut 6 more as well gluing each one together with the stamped and colored one on top making a chip board. Adhere this on top of the first one you added to the card base.

Stamp the Wild Rose flowers on the Deluxe Flower Shaping paper with the Fuchsia Pink. Cut out with the coordinating die. Highlight the edges with the Fuchsia Pink ink and place in the matching mold to shape. Put 2 of the flowers together making one flower for a total of 5 flowers.

Stamp the Leafy Accents on white card stock with Cottage Ivy ink, color in with the Vivid Chartreuse.  Cut out with the coordinating die.  Hightlight the edges with more of the Cottage Ivy and place in the matching mold to shape. Adhere the flowers and leaves on top of the printed flowers and leaves.

To finish, add glitter to all the leaves and flowers along with Prills in the center of each flower.

Other Products: Paper Trimmer. Die Cut Machine, Hot Glue gun,

Instructions:

Score a 11" x 4 1/4" piece of Deluxe Flower Shaping paper at 5 1/2" and fold at the score line to create a 4 1/4" x 5 1/2" card base. Cut a 4" x 5 1/4" piece of white cardstock and emboss it using Altenew Broken Chevrons Stencil and Spellbinders Tan Embossing Mat. Adhere it on the card base. Cut a 3 3/4" x 5" piece of pattern paper from Floral Sentiments paper collection and adhere it on the card base.

Stamp the image from Friend Floral Sentiments Cling Stamp set on a piece of Deluxe Flower Shaping paper using Jet Black Archival ink and colour it with watercolours. Colour some parts of the image with metallic watercolours to add shine. Die cut this image using the matching die from  Friend Floral Sentiments die. Adhere it on the card base using foam tape.

Other Products: Brustro Metallic watercolours, Altenew watercolours, Altenew Broken Chevrons Stencil, Spellbinders Tan Embossing Mat and double sided foam tape.

Instructions:

Card size 6” x 6”. Score at an angle from edge to edge, as shown. Take pattern paper and adhere on card base. Cut corner die from HCD3 7434 Delicate Daisy Corner & Border die on white cardstock and luxe gold cardstock, adhere thema  little offset and adhere it on card base using designer dries clear adhesive.

Cut label die from HCD1 7202 Album Tags and Accents Die, eyelet label die on white cardstock and another layer on pattern paper, as shown. Add sentiment stamp from HCPC-31023 Special Floral Sentiment Cling Stamp using archival ink-vibrant fuchsia and mulberry, cut it with coordinating.

Stamp image from HCPC 31023 Special Floral Sentiment Cling Stamp set using archival ink-Jet Black and another layer with archival ink-mulberry on white cardstock and cut it with coordinating die HCD1 7459 Special Floral Sentiment Die. Color it with Zig marker.

Using same stamp on white cardstock using archival ink-vibrant fuchsia, cut it with coordinating die and add crystal clear glitter and adhere it with foam tape and designer dries clear adhesive.

Sentiment “Special” stamp it using archival ink-mulberry and cut it with coordinating die. Cut special die four times on white cardstock, adhere them together using designer dries clear adhesive, to give some dimension, as shown.

Add randomly lemon chiffon prills.

Other Products: Big Shot Plus Machine.

Instructions:

Fun fold card size is 5 x 7”. I was inspired by this card and adjusted the measurements to fit my needs. Score and fold Melon Mambo cardstock at 1 1/2” (mountain fold) 3” (valley fold) 4 1/2” (mountain fold) and 6” (valley fold). Use the bone folder to burnish the folds well. Cut sheet 5A from the Floral Sentiments Paper Collection I each from the right and left borders at 1 and 1/4 x 6 3/4” and the top center at 4 3/4 x 6 3/4” and ink the edges using Melon Mambo ink. Adhere the larger piece to the inside of the card and the two floral strips to the front of the two mountain fold panels. Cut Melon Mambo cardstock to 3 3/4 x 5” and a piece of white cardstock 3 1/2 x 4 3/4”. Stamp the ‘Right next door or miles apart, friends are always close in Heart’ sentiment from the Friendship Sentiments Cling Stamp Set on the white cardstock using Melon mambo and Polished Pink inks. Cut a piece of the designer paper 3 1/2 x 3/4”, ink the edges and adhere to the white cardstock as shown then adhere to the inside of the card. Cut another Melon mambo piece 8 x 5 1/4”, score and fold at 4” on the long side. Cut white cardstock 3 3/4 x 5”, dry emboss using a textured embossing folder and adhere to the front of the folded colored cardstock. (The fold will be on the right), flip it over and adhere a piece of 3 1/2 x 4 3/4” white cardstock stamped with the ‘For my Friend’ sentiment from the Friend Floral Sentiment Cling Stamp Set using Melon Mambo and Polished Pink inks. Open the panel and add double sided tape to the right and left inside edges. Center this piece over the inside piece, remove the tape backing on the left side and fold the left side of the inside mountain fold over the panel and adhere. Remove the backing tape from the right side, fold over to the front and adhere to the floral designer paper. 

Stamp the Friend Floral Sentiment Cling Stamp Set on Heavy white cardstock 2x Using Memento Tuxedo Black ink. Use just the outside die to cut the first one. Use the outside die and the inside die to cut the second one and color using Stampin Blend markers – Melon Mambo, Polished Pink and Granny Apple Green. Bend up the edges of the flowers of the stamped image to give a little dimension. Cut the frame 5x more from white cardstock and adhere together to create a dimensional piece. Adhere the stamped image on top using dries clear adhesive. Color in the lettering on the full diecut then sponge both the full diecut and the frame with dries clear adhesive and cover with Rajni Chawla’s Crystal Clear glitter. When dry, adhere the frame to the full diecut and adhere to the embossed white cardstock. 

To finish the card, add some extra sparkle by sponging the designer paper randomly with dries clear adhesive and sprinkling with crystal clear glitter, add go green prills to the flower centers.   

Other Products: Heavy ‘White Cardstock, Melon Mambo Cardstock, Stampin Pads – Melon Mambo and Polished Pink, Stampin Blends Markers – Light Melon Mambo, Light Polished Pink and Light Granny Apple Green, Misti, Paper Trimmer, Diecutting Machine, Double Sided Tape, Funnel Tray, Embossing Folder

Instructions:

The finished card measure 6 x 6". Take a 12 x 6 white base and fold it in half to make a side fold card. Die cut the Stairway Garden Die in white cardstock and glue down onto card front with white glue. Use the same die to cut a border in green paper #9B from Floral Sentiments Collection. Put 3D crystal lacquer on the border and glue it on your card base with 3D foam.

Stamp twice the sentiment from Friend Floral Sentiment onto a piece of watercolor paper using leaf green and rose bud ink. Color with zig markers and cut the elements.  Add prills in the center of the flowers and crystal lacquer on some leaves and flowers. Stamp another time with clear embossing ink and emboss with magenta embossing powder. Cut with the coordianting die. Glue the elements you cut on it and glue it on your card with 3D foam.

Stamp, cut and color in green leaves from cottage tree 'scape and glue it under the sentiment.

Other Products: Die cutting machine cut'n boss, scissors, water mister, hot glue gun, watercolor paper, clear embossing ink, Lindy's stamp gang embossing powder magenta

Instructions:

The ready side fold card measures 6″ by 8″. Cut a smooth white cardstock measuring 12″ by 8″ and score it at 6″ on the longer side. Crease and score it well using a bone folder.

Choose a pattern paper from the designer paper collection and cut measuring 5 1/2″ by 7 1/2″. Mat it on the Luxe Gold cardstock creating a delicate border of 1/16″ on all sides. Layer the panel on the card base using foam dots.

Cut 1 each lacy frame from white and Luxe gold cardstock using Fancy Classic Rectangle Frame Die. Glue the golden frame behind the white one, creating a delicate shadow. Layer the fancy frame on the card base using tiny foam dots. Choose the pattern paper from the designer paper collection and cut the inner solid label and double layer it in the center as shown. Use the inside panel to decorate the center and stamp the floral sentiment with Magenta Hue Archival ink using the Special Floral Sentiment Cling Stamp Set. 

Also, stamp the same floral sentiment in black and color the image with Zig Clean Clear Brush Markers. Cut the outer floral frame using its coordinating die set and layer the frame on the card front as shown. Also, stamp the partial sentiment "Special" using Magenta Hue on white cardstock and cut it using its coordinating die from the same die set. 

For vellum butterflies, stamp the image twice using white pigment ink on Rajni Chwla's Vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set the images using a heat gun. Finish the card by adding vellum butterflies. 

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, Score Board, Hero Arts White Pigment Ink.

Instructions:

Card size: 4 3/4 x 6 3/4". Make a shaped card using the outer die of the Royal Elegance on a folded white card at least 5 x 7” in size. Lay the die over-lapping fold by about 1/8”.  Cut another card front from fuchsia decorative paper using the same outer die then glue to card base matching edges. Die cut the decorative dies of the Royal Elegance from white and from gold, glue together off-set slightly. Glue to card front.

Stamp the Grateful Floral Sentiment using black and again using Vibrant Fuchsia, die cut both, color black stamped image, insert Fuchsia center, pop both up in the center of card.

Glitter the flowers and butterflies.

Other Products: White cardstock, foam sheet, Copic Markers: B21, B24, RV02, RV10, RV17, RV55, YG03, YG23, YG17, E72, E74

Instructions:

Make a card base from white cardstock measuring 7" x 5 ". Add a mat layer of pink cardstock measuring 6 3/4" x 5 3/4". Add another mat layer of Luxe Gold Cardstock measuring 6 1/2" x 5 1/2". Add a pattern paper of light background measuring 6 1/4" x 5 1/2" on the gold card piece. 

Cut two pieces of Gold and White cardstock using the Delicate daisy Corner and Border die set. Adhere the white die cut piece on the gold  die cut piece and add the two corners on the top and bottom of the card front.

Stamp the Friend Floral Sentiment image on Deluxe flower shaping paper with jet black are  ink. Colour with Zig markers and cut with the matching die. Cut out the sentiment separately from this image. Add the sentiment on the card front and adhere the floral sentiment frame on this with foam tape.

Stamp the medium size flowers from the small Wild Rose stamp set with Vibrant Fuchsia Archival ink on Deluxe Flower Shaping paper. Colour with the shade of Vibrant Fuchsia, Plum colour and Sunflower colour. Cut the flowers with the matching die and shape them in the 3D flower shaping mold. Adhere 2 flowers together and add Prills in the centre to finish the flowers. Stamp the leaves from Leafy Accent stamp set with green Archival ink on Deluxe Flower Shaping paper. Shade with green ink. Cut with matching die and shape the leaves in the 3d shaping mold.

Make filler flowers using the smallest flower and use green ink to colour them.

Arrange the flowers and leaves on the card with hot glue.

Other Products: Die cutting machine, scoring board, Dimensional foam tape

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5" piece of green paper from the Floral Sentiments Paper Collection and adhere, cut out the Rectangle Filigree Frame Die in white cardstock and adhere.

Stamp the frame from the Friend Floral Cling Stamp Set in Jet black and sponge with Sunflower, Magenta Hue and Vivid Chartreuse. Cut out with coordinating dies and add glitter, cut into pieces to fit corners of 5 x 7" card.  Cut out the same frame in Gold Luxe Cardstock and cut apart, adhere offset with foam tape to create a shadow as pictured. Adhere pieces to corners.

Stamp the sentiment from the Special Floral Cling Stamp Set in Jet Black and cut out with coordinating die, color with marker. Cut out again in Luxe Gold Cardstock and adhere offset, adhere to card with foam tape.

Stamp the Small Wild Rose Cling Stamp Set in Vibrant Fuchsia (small flowers) and Magenta Hue (larger flowers), cut out with coordinating die and sponge the smaller flowers with Vibrant Fuchsia and the larger flowers with Sunflower and Magenta Hue, add stamens and glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating die and sponge with Vivid Chartreuse. Sculpt with Leafy Accents Shaping Mold.

Adhere leaves and flowers as shown.  

Other Products: White cardstock, pink marker

Instructions:

Ready tent fold card measures 9.25" × 4". Cut a mat from designer paper measuring 9" × 3.75", adhere it on ready card base. Cut a mat from white cardstock using second largest die from Slim Eyelet Rectangle die set. Cut a mat from designer paper measures 8.25"×3.25" and adhere it on white cardstock mat. Adhere it on card using dimensional tape. Cut a decorative piece from white cardstock using die from the Slim Lattice Oval die set. Glue it on card using foam dots.

Stamp Friend Floral sentiment frame on watercolor paper using pebble beach Archival. Paint image using zig markers and cut with coordinating dies. Also cut another frame from luxe gold cardstock. Glue both frame together and adhere it on card using foam dots as pictured. Stamp small Wild Rose flower on deluxe flower shaping paper using pink peony ink and cut with coordinating die Paint flowers using pink peony and magenta hue ink, shape using small ball tool and add prills to the center of the flowers. Stamp leaves from classic rose and Iris Garden Accents Stamp on deluxe flower shaping paper using fern green ink, paint using leaf green and fern green ink. Cut with coordinating dies and shape using stylus. Arrange flowers and leaves using hot glue as shown. Stamp sentiment using leaf green and olive green ink on deluxe flower shaping paper. Cut with coordinating die. Cut more 5 pieces from scrap paper. Glue all together to add dimension. Glue it on card as pictured.

For finished look, apply Crystal Clear glitter on flowers using Art Glitter Clear Dries adhesive.

Other Products: Smooth white cardstock, Watercolour Paper

Instructions:

Cut a piece of dark pink paper from the Floral Sentiments Paper Collection,  to 4 3/4" x 6 3/4", adhere to a 5" x 7" card blank, using Designer Dries Clear Adhesive. Die cut a Rectangle Filigree Frame from the Rectangle Filigree Frame Die Set, in white card. Adhere to card front. Cut another one in pink paper from the paper collection. Adhere the pink centre piece into the middle with foam tape.

Stamp onto white card with Encore Gold Embossing Ink, three sets of Special Sentiments from the Special Floral Sentiment Cling Stamp Set. Add Gold Embossing Powder, heat with a heat tool. Die cut with the matching dies; die-cut two with the outside edge only. Die cut one using both the outside edge and inner dies to make a frame. Color using Ranger Archival Plum and Ranger Archival Leaf Green inks using Daubers. Color the extra areas on the Special Floral Sentiment with a Zig Clean Color Real Brush Markers in Almond Pink. Hand cut a butterfly from the spare Special Floral Sentiment die-cut. Adhere the Special Floral Sentiment to the  card front with foam tape. Adhere the frame on top with foam pads.  Adhere the hand cut butterfly with a narrow piece of foam tape.

Sponge Dries Clear Adhesive over the frame, add clear glitter. All done.

Other Products: 5 x 7" card blank, white card, heat tool, foam tape, die cutting machine, clear glitter.

Instructions:

Finished top fold card measures 6” x 8”. To create card base, using white card stock cut card front panel measuring 6” x 8”, and back panel measuring 6” x8  1/2”. Score back panel at 1/2” and using Dries Clear Adhesive adhere two card panels together to create top fold card base. Create first matting layer using light green decorative paper from the Floral Sentiments Paper Collection. Adhere to front of card base. 

For next section of matting layers, cut a piece of white card stock measuring 5 1/2” x 7 1/2", a piece of Luxe Gold Cardstock measuring 1/16” smaller, and a piece of multi colored patterned decorative paper from the Floral Sentiments Paper Collection another 1/16” smaller. Adhere together in the order that has been listed for cutting. Apply dimensional foam tape to back of layered section and adhere to card base. 

Die cut larger decorative frame from the Fancy Classic Rectangle Frame Die using one of the bold floral pages within the Floral Sentiments Paper Collection. Adhere to card base using Designer Dries Clear Adhesive. Next, die cut the center portion of the Fancy Classic Rectangle Frame Die using the same light green decorative paper used in the first layer on the card base. 

Using the Grateful Floral Sentiment Cling Stamp set and stamp tool/acrylic block, position where sentiment placement should be on center die cut, ink sentiment portion only using black Zig Marker and stamp sentiment. Adhere to card base using dimensional foam tape. Die cut center frame from Fancy Classic Rectangle Frame Die using Luxe Gold Cardstock, and set aside until ready to arrange stamped floral images.

Stamp one inking of the Grateful Floral Sentiment Cling Stamp Set, along with one inking of the Friend Floral Cling Stamp Set onto white Bristol Smooth marker paper using Ranger Archival Jet Black Ink. Color with Zig Markers or coloring medium of your choice. Die cut both images using coordinating dies including center portions to create two floral frames. 

Snip apart floral frames to create smaller floral clusters. You will see that there are natural breaks within the illustration where snipping apart will be easy, lending the smaller pieces to be layered to create pretty mixed floral clusters. 

Locate gold frame cut out earlier, and place (not adhere) on design. Create a cluster of florals from the Grateful Floral Sentiment Cling Stamp Set at the top left corner of the raised sentiment, as well as the bottom left corner, arranging them under the gold frame. Once happy with placement, adhere to card front. Next, adhere gold frame to card front. 

Finish floral clusters with the flower sections snipped from the Friend Floral Cling Stamp Set using double sided foam tape. 

Lastly, using a piece of Hydra Sponge, apply a small amount of Dries Clear Adhesive to floral clusters and sprinkle with Crystal Ultrafine Transparent Glitter. 

Other Products: MISTI stamping tool, acrylic stamp blocks, white Bristol Smooth marker paper, die cutting machine, funnel tray, dimensional foam tape, scissors, paper trimmer

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of green pattern paper 5” x 7” and adhere to the front of the card. Cut a piece of pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the green paper. Die cut the decorative card from the HCD2-7400 Classic Companion Border Die out of Deluxe Flower Shaping Paper. Add Frosting Powder to the frame with Dries Clear glue on a sponge. Cut a piece of pattern paper 4 3/4” x 6 3/4” and adhere the decorative card front to it and then adhere to the front of the card.

Stamp the floral frame from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Jet Black ink on light green pattern paper and die cut using the outer frame die from the HCD1-7461 Grateful Floral Sentiment Die. Stamp the floral frame from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Jet Black ink on Iris cardstock.  Colour the image with Zig Clean Colour Brush Markers and die cut the frame using the No.1 and No. 2 dies from the coordinating die set. Die cut another 4 frames using the inner and outer frame dies and stack together. Adhere the stacked dies to the stamped base. Add some sequins and Flower Pearls - Green, Pink, Hot Mama Prills,  to the middle of the frame.  Die cut a piece of clear cardstock using the outer frame die and adhere behind the painted image.  Adhere this to the front of the stacked dies to create the shaker element.

Stamp the floral frame sentiment from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Picked Raspberry ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Die cut another plain sentiment from Deluxe Flower Shaping paper and adhere the stamped image on top. Adhere to the front of the shaker element over the sentiment on the base of the shaker element.

Stamp the leaves from the HCPC-3887 Wild Aster Cling Stamp set in Olive ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green and Vivid Chartreuse ink and die cut with the coordinating die. Colour the backs of the leaves with Vivid Chartreuse ink and shape using a golf tool. Adhere the leaves to the top right and bottom left as shown.  

Stamp the leaf filler image from the HCPC-31022 Iris Garden Accents Cling Stamp Set in Olive ink on Deluxe Flower Shaping Paper. Colour the leaves with Leaf Green ink and die cut with the coordinating die. Adhere around the other leaves.

Stamp the rose images from the HCPC-3906 Small Wild Rose Cling Stamp set in Magenta Hue ink and die cut with the coordinating dies. Colour the petals with Rosey Posey, Cactus Flower and Plum inks and the backs with Rosey Posey ink. Shape using the coordinating mold. Add a dollop of hot glue to the centres of the flowers to create depth for the centres and then add Heart of Gold Prills and adhere over the leaves.

Stamp the small floral images from the HCPC-3931 Large Floral Urn in Leaf Green ink on Deluxe Flower Shaping Paper. Colour the images with Sunflower and Leaf Green inks and die cut with the coordinating die. Trim and adhere around the roses as shown.

To finish, add Crystal Clear glitter to the flowers and leaves with clear gloss gel medium and a paint brush. Add Ultrafine Crystal glitter to the pink sentiment with Dries Clear glue.

Other Products: Iris Cardstock, clear gloss gel medium, paint brush, Distress Oxide ink - Picked Raspberry, hot glue gun, Dress My Craft Sequins, Dress My Craft Flower Pearls - Green, Pink, Ranger Archival ink - Rosey Posey

Instructions:

Cut out a 5" x 7" base from white paper, then cut a slightly smaller rectangle from the gold paper and glue it to the base. Cut a 4 3/4" x 6 3/4" rectangle from the green paper from the collection. Then cut out a 4 1/4" x 6 1/4" rectangle from the white paper and glue it to the card. Cut out a slightly smaller rectangle from the gold paper and then cut out a 4" x 6" rectangle from the paper from the collection and glue it to the card with Double Dots 100pc. - 3D Foam Circles.

Stamp the element from the Special Floral Sentiment set on white paper with gold embossing, heat it with the embossing heater. Cut out with the matching die. Use the same die to cut out an element from gold paper and glue under the previously cut element so that it sticks out a little from the bottom. Color with watercolor pencils.

Sramp the sentiment from the Friend Floral set with gold embossing on gold paper, heat it with a heater. Cut with a matching die.

Glue as shown.

Other Products: Watercolor pencils, die cutting machine, embossing Stamp Pad

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the outer Majestic Swirl Frames Die over the folded card with one edge slightly over the folded side and die cut to create the shaped card. Cut single piece using this same die from patterned paper and place into card using Designer Dries Clear Adhesive. Die cut an outer frame from paper collection and add to the front of the shaped card using Adhesive Foam Strips.

Stamp Grateful Floral Sentiment Cling Stamp Set on the white paper using using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Sprinkle Circa Embossing Powder - Iridescent and melt using heat tool. Shadow background sentiment using pencils. Colour with pencils. Place onto the card using adhesive foam strips.

Other Products: Circa Embossing Powder - Iridescent, Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Fold white cardstock to 6 x 5.5" with fold on the top then use the outline die from the Filigree Companion Frame Die set to cut leaving the top of the die over-hanging fold by about 1,5". Cut another full front with the same die from the white cardstock and another one from the Floral Sentiments Paper Collection. Glue the front on. Cut out a silver and a white frame with die No. 2 from the Filigree Companion Frame Die set. With the same die cut out a green panel from the Floral Sentiments Paper Collection. Adhere them to the base.

Stamp the sentiment with the Special Floral Sentiment Cling Stamp Set in Forget Me Not ink and cut it out with coordinating die, repeat it and cut out just a sentiment. Stamp the sentiment with the Special Floral Sentiment Cling Stamp Set in Tuxedo Black ink, color it and cut it out with 2 coordinating dies. Adhere all elements together as pictured and to the base.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Forget-Me-Not ink onto Deluxe Flower Shaping Paper. Color their edges and their centers with the same ink, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small stamens to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp in Forget-Me-Not ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 3 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal