Other Products: White Cardstock, Dimensional Adhesive, Lichen Glitter, Funnel Tray, Scissors, Paper Trimmer, Die Cutting Machine,

Instructions: Cut a piece of white cardstock to 8 1/2 x 5 1/2", score at 4 1/4". When stamping on the unfolded card base, you’ll want to use scrap paper to cover the backside of the card. Stamp the large butterfly from HCPC-3951 Large Floral Butterfly Stamp set at an angle on the card front. To create a butterfly with various shades of pink and purple hues, ink the outer edges of butterfly with Paradise Teal, then apply Magenta Hue ink over entire butterfly and when stamped it creates a gorgeous shade of purple along the wings of the butterfly. Diecut the card front using the two largest dies from the HCD2-7352 Large Floral Butterfly die, place the cutting boards only on the stamped card front before running it through your diecutting machine. Use a scissors to trim along the score line, along the top and bottom of the card front. Trim just to the diecut shape, thus releasing the outter edge of card base. This will leave you with a 4 1/4 x 5 1/2” card base with a shaped card front when folded. Cut the aqua panel from sheet 10A from the Floral Butterfly paper collection to 4 1/16 x 5 5/16”, ink the edges with Magenta Hue ink and adhere onto card base.

Diecut vellum using the largest butterfly die from HCD2-7352 Large Floral Butterfly die. Trim the left side of the vellum butterfly to align perfectly with your card base. Carefully bring the butterfly frame on the card base forward and place the vellum piece between the frame and the stamped image, creating a frosty appearance. Adhere with Dries Clear glue. Diecut the lacey butterfly overlay on white cardstock. Use a Stack and Store dauber to apply a hint of Magenta Hue ink. Apply Dries Clear Glue onto hydra sponge, randomly dab on butterfly overlay and sprinkle with Rajni Chawla’s Frosting Powder, heat set with Heat It tool. Use stylus handle to create a gentle shape to butterfly overlay, then adhere onto vellum using foam adhesive.

Stamp the following images from HCPC-3952 Floral Butterfly Accents Cling Stamp Set onto white cardstock and diecut with the coordinating dies. Stamp the floral spray with Leaf Green and Vibrant Fuchsia, the floral sprig with Bright Tangelo and Leaf Green and the fern leaf with Leaf Green ink. Diecut with coordinating dies.

Use the Stack and Store daubers along with the following inks to color the images. Use Vivid Chartreuse and Leaf Green for all the foliage, for the floral spray add Magenta Hue onto the pink flowers and for the floral sprig apply a light touch of Bright Tangelo ink to the orange flowers

Using scissors, cut the fern leaf in half and adhere one half along edge of aqua panel as shown. Reserve the other half for another project. Use shaping stylus to shape the pink and orange flowers. Stamp sentiment from HCPC-3845 Just for You Sentiment stamp set by applying Paradise Teal on “friend” then add Magenta Hue over entire stamp before stamping on a piece of cardstock. Trim to 1/2 x 2 7/8" using paper trimmer, then also separate the sentiment to create two pieces. Cut a purple mat 1/8” larger than sentiment, apply Magenta Hue along edges and adhere. Give the sentiment a slight shape by using the handle of the stylus then adhere on butterfly using foam adhesive.

Cut apart florals and adhere onto card base as shown using Dries Clear glue and foam adhesive. For a finishing touch, add the Dries Clear glue onto background paper and foliage, sprinkle with Lichen glitter and tap off.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Copic BV23, BV00, V17, BV04, BG11

Instructions: For the base use Gateway Fold Card – White. Cut panel using outside Scalloped Flourish Gateway Die from paper collection and place onto card using Designer Dries Clear Adhesive. Cut outside frame using Scalloped Flourish Gateway Die from gold luxe paper and adhere using Darice Adhesive Foam Strips. Cut using frame die from paper collection and adhere to the front of the shaped card using Adhesive Foam Strips. Attach to the card base using foam adhesive and hot glue.

To create butterfly, stamp the Large Floral Butterfly Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Majestic Violet, cut out with the coordinating die. Colour with copics BV23, BV00, V17, BV04, BG11. Sponge the butterfly with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Magnolia flowers, stamp Sweet Magnolia Blooms on white paper with Ranger Archival Ink Pad - Magenta Hue and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Magenta Hue using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flowers. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, Stamp the Sweet Magnolia Blooms Cling Stamp Set and Large Floral Butterfly Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Elaborate Birthday Cling Stamp Set on a piece of the paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: White cardstock-heavy weight, Peerless Watercolors, sheer ribbon, embossing ink (VersaMark used here), watercolor paper.

Instructions: Card size: 4 3/4” x 5 3/4". Fold a piece of heavy weight white cardstock, 10 x 6”, to measure 5 x 6”. Place the top of the outer Butterfly die just over the fold so that it will not cut away fold (about 1/4" over fold). Score cut out butterfly again on the right side right at the intersection of top and bottom wing, fold down toward card inside to form the easel. Cut another full outer butterfly from white and glue just the bottom half to the folded down bottom half of card base butterfly.

Use a piece of white watercolor paper (smooth as possible) about 5 x 6” and wet entire piece. Use a large flat brush to “wash” paper with Fuchsia watercolor. Let dry completely then dust the paper with non-static pouch, ink Large Butterfly stamp with VersaMark or other clear embossing ink stamp washed paper, emboss with white powder then die cut. Stamp another piece of white with the butterfly stamp, emboss then die cut for the inside of card. Sponge the outer edges of inside butterfly with Magenta Hue. Glue the inside down to inside of card and glue the watercolor washed butterfly to front of card.

Die cut the decorative butterfly out of Luxe Gold and out of white, glue them together slightly offset. Cut out another gold head and antenna from the butterfly die (the one used to die cut the stamped image), glue the gold head to the stamped watercolor butterfly. Glue the decorative gold and white butterfly to the body of stamped butterfly and gold head, leaving wings free.

Stamp Magnolia Blossoms using Magenta Hue, sponge backs, die cut and shape in the mold. Stamp leaves using Fern Green, sponge front and back with Leaf Green, adding in a bit of Magenta Hue at the tips, die cut and shape in the mold. Glue 2 of each size blossom together to form each flower, insert gold and hot pink stamen. Form a small arrangement for the inside of card to be placed just so that butterfly will stay open to desired position.

Stamp sentiment using Magenta Hue and die cut using a small tag. Glue a fuchsia bow to the top then glue the tag to the inside of card.

Finish card by glittering the body of the butterfly on the front and glittering the flowers inside.

Other Products: Smooth White Cardstock, Vellum Paper, Versamark, Water Color paper, Dimensional Tape, Hot Glue

Instructions: Ready side fold card measures 7.25" × 7.25". First, cut a piece of designer paper measures 7” × 7” and adhere on ready card base. Further cut another designer paper measuring 6.5” × 6.5”, distress edges with matching ink and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card front using dimensional tape. Cut white cardstock using Fanci-Fold Pocket Accents Die, fold score line and glue it on card to create a pocket.

Stamp images from Floral Butterfly Accents stamp on watercolor paper using black archival. Paint images with zig markers and cut with coordinating dies. Stamp Butterfly image on watercolor paper and paint using zig markers. Also stamp Butterfly images on vellum paper using versamark and heat emboss using white embossing powder. Cut Butterflies using coordinating dies. Stamp flowers on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint with same ink and shape using groove tool. Pierce center of flowers and add stamens.

Arrange all die cuts in pocket and glue using hot melted glue as shown. Stamp sentiment using majestic violet ink on white cardstock strip and glue it on designer paper strip. Arrange sentiment on card and glue using dimensional tape. For finished look apply Crystal Clear using Art Glitter Dries Clear adhesive.

Other Products: White cardstock, Copic: R22, R21, RV10, RV02, RV04, YG11, YG05, Y11, Y15, B21, B24, V01, V12, V15, ribbon, Easter basket pearlescent grass, Acrylic Shimmer Additive

Instructions: Size: 1 3/4" deep, 4 3/4" wide, 6 3/4" tall. Cut 2 Lattice Swirl Gateway Dies from white. Cut 1 piece of white 2 1/4" x 9” then score the strip at 2 1/2" and 6 1/2" leaving 2 1/2" end. Score down both long sides at 1/4" making a 1 3/4" wide side and bottom of basket (this can really be any width you desire just be sure to add 1/2" for the tabs on the long sides [1/4” each] and the other scores would be the same). On each side at the short score make a notch from edge to long side score line, this enables nice folds for a box without excess paper.

Fold on all score lines then glue to 1 of the die cuts about 1/2” from the bottom (sides will tilt in slightly). When completely dry, glue the other die cut so that bottoms, sides and tops match then glue the top “handle” together about 1” across but no further down the sides.

Stamp various butterflies from the Small Floral Butterfly set, die cut and color with preferred coloring method. If you watercolor make sure to stamp butterflies on smooth watercolor paper to hold up to the water also use Archival or Versafine Claire to stamp with as Memento is best with alcohol inks and may bleed with water. Add some shimmer to the wings mixed with a tiny bit of water. Paint glue around the edges of butterflies and sprinkle with Ultrafine glitter.

Arrange butterflies on the front of basket and 1 for the inside of the back, seen from the front. Glue onto basket then add a multi-loop bow to the top.edited Stuff basket with pearlescent grass and it is ready to fill with treats.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, heat tool, Promarkers, self-adhesive crystals, ColorBox Frost White ink

Instructions: To create a base, fold white cardstock to 4 x 6" with fold on the top, then use the Second Outline Frame from the Eyelet Frame Gateway Die to cut leaving the top of the die over-hanging fold by about 1/4". Cut out a white frame with the Second Eyelet Frame and a green frame from the Floral Butterfly Paper Collection with the Second Outline Frame, adhere them together and to the base. Cut out two white frames with the Third Eyelet Frame, adhere them using adhesive foam. Cut out a green frame from the Floral Butterfly Paper Collection with the Third Outline Frame. Adhere them as pictured. Stamp the sentiment in Vibrant Fuchsia ink and cut out.

Stamp big butterfly from the Large Floral Butterfly Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Cut out 3 white smallest butterflies from the Large Floral Butterfly Die. Color the edges two of them and adhere all four together as pictured.

Stamp 6 big blossoms from Sweet Magnolia Blooms Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping Paper, color them with the Rose Bud and Vibrant Fuchsia inks, diecut with coordinating die and shape with the mold. Adhere 3 layers of petals and add some Pastel Pearl Stamens to the centers. Stamp 8 Hyacinth flowers from Fragrant Hyacinth Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping Paper, color them with the same ink, diecut with coordinating die and shape with mold. Then bend all petals with the Golf Tool and add the Pastel Pearl Stamens to their centers. Stamp blossoms from Lush Lilac Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Stamp 4 branches from Floral Butterfly Accents Cling Stamp Set in Tuxedo Black ink onto Deluxe Flower Shaping Paper, color with promarkers and diecut with coordinating dies. You`ll also need 3 branches from Leafy Accents Cling Stamp Set, stamp them in Leaf Green ink, color them, cut out with coordinating die and shape with the mold. Use dimensional adhesive and hot glue to attach sisal, flowers, branches, sentiment and butterflies onto card as pictured.

Add some self-adhesive crystals. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and butterfly.

Other Products: Gel pens, bow, hot glue, 6 x 6” card blank, trimmer/scissors, versafine, clear heat embossing

Instructions: Cut a 6 x 6” panel from the Floral Butterfly Paper Collection with a circle centre design and die-cut the circle with Eyelet Circle & Basics Small Die Set and edge with Deep Purple. Adhere onto the front of the tent fold card, lay the same circle die inside the aperture and cut again cutting the circle aperture into the card blank. Die-cut the Eyelet Circle edge in Deep Purple and adhere the cut circle onto this and adhere onto the inside of the card covered in Floral Butterfly Paper. Stamp in Deep Purple ‘Best Wishes’ from Celebrate Love Sentiments.

Stamp onto white cardstock with versafine and clear heat emboss Large Floral Butterfly, Floral Butterfly Accents, Small Floral Butterfly. Colour flowers and leaves with Zig Clean Color Real Brush Markers and butterflies with gel pens and die-cut. Die-cut a tag from Floral Butterfly Paper Collection and adhere a bow to the top with hot glue.

Lay the ferns around in a circle, lift some leaves up on dots and overlap some individual ferns to give more lift, adhere with hot glue. Adhere the butterflies and flowers tucking in different directions.

Apply some Crystal Lacquer and glitter to the leaves.

Other Products: White Cardstock, Canson Watercolor Paper, Magnets, Die Cut Machine, Metallic Cording, Cornflower Blue Ranger Archival Ink

Instructions: The finished card size is 6" x 6". Working on the four fold-out pieces of the card I cut pieces of 3B of the Floral Butterfly paper Collection and used the dies from the Rounded Lattice Window dies and the Round Eyelet Window dies. Glue down these pieces.

Using the Large Floral Butterfly shadow die, cut a butterfly using a piece of the Flower Shaping Paper. I covered this butterfly front and back using a piece of 8B from the paper collection. Now using watercolor paper, stamp the large butterfly using Cactus Flower ink. I used two zig clean markers and the water brush to color the butterfly (081 Light Violet and 042 Turquoise Green). Be sure and dry the color as you move across the butterfly to help the colors not to run together. When finished and dry, add glitter and allow to dry. Using the vellum, cut out the inside piece of the butterfly and glue to the colored butterfly. This makes the butterfly look like it is fluttering along.

Now open up the card flaps and let’s decorate as well as deciding where you want to put the magnets so the butterfly can hold the card closed. This needs to be done before you finish gluing down the paper pieces of the back of the shadow piece and on the inside of the right side flap. Now cut out pieces of 11B of the paper collection using the die from the Round Lattice Window die. Decide on a card front to go on the inside. It is very easy as the paper all coordinates well; the guess work is taken out for you. I chose a sunny piece and glued it down. Stamp the floral accent pieces onto a piece of the flower shaping paper. Use the Stack and Store Daubers to color in and then cut out with coordinating dies. I also stamped a pretty butterfly and colored it to fit on the right hand side. Stamp the sentiment and using the round dies cut it out and glue to the inside panel. Tie a bow using the metallic cording and adhere to the top of the circle sentiment. Glue down the greenery and flowers and add more glitter to all areas of the part of the card.

The card is finished and all you need to do is fold it together and put into a regular 6 x 6 envelope and it should mail with no problem. It can also go into a clear envelope. I love how this card came out and was so impressed at how easy it came together! Good luck with yours!

Other Products: Hero Arts Unicorn White pigment ink, WOW white embossing powder, Altenew Watercolors, Brustro watercolor Cardstock, Brustro green gold brushes, pearls and rhinestones.

Instructions: To see a video tutorial on this card click here. Die cut a 5" x 7" side folding card base using the largest die from Palace Gateway Die so that the left folded edge of the card base is inside the cut line. Die cut a piece of pattern paper from Floral Butterfly Paper Collection using the same die and adhere it on the card base. Die cut a piece of white cardstock using the dies from same die set. Trim off the gate from the die cut and adhere the remaining frame on the card base.

Stamp the butterflies from Large Floral Butterfly Cling Stamp Set and Small Floral Butterfly Cling Stamp Set on vellum using Hero Arts Unicorn White pigment ink and heat emboss them with WOW white embossing powder. Die cut them using the matching dies from Large Floral Butterfly Die and Small Floral Butterfly Die. Curl the wings using the back of Groove golf tool or paint brush.

Stamp the leaves and floral branch images from Floral Butterfly Accents Cling Stamp Set on a sheet of watercolor cardstock using Olive, Leaf Green and Manganese Blue Archival Inks. Color in the images using Altenew watercolors. Die cut them using the matching dies from Floral Butterfly Accents Die. Shape them using Deluxe Flower Shaping Kit

Stamp the flowers from Sweet Magnolia Blooms Cling Stamp Set on Deluxe Flower Shaping Paper with Vibrant Fuchsia Archival Ink. Ink the petals with the same ink and die cut them using the matching dies from Sweet Magnolia Blooms Die. Shape the flowers using 3D Magnolia Shaping Mold and Deluxe Flower Shaping Kit. Add few cream stamens from Rock Candy Stamens to the flower centers.

Stamp the flowers from Fragrant Hyacinth Cling Stamp Set on a piece of Deluxe Flower Shaping Paper using Vibrant Fuchsia and Cactus Flower Archival Inks. Ink them with same inks and die cut using matching die from Fragrant Hyacinth Die. Shape them using 3D Hyacinth Shaping Mold and Deluxe Flower Shaping Kit. Add a few white stamens from Assorted Pearl Stamens to the flower centers.

Arrange and adhere all the flowers, leaves and butterflies on the card front as shown. Add a few ladybugs made with Ebony Black and Red Berry Nuvo Crystal Drops to the floral arrangement. Add a few pearls on the die cuts and rhinestones on the butterflies to add finishing touch.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, Promarkers, self-adhesive pearls

Instructions: Fold white cardstock to 5 x 7" with fold on the top then use the outline die from the Decorative Circle Frames to cut, leaving the top of the die over-hanging fold by about 1/4". Cut out two full fronts with the same die from the white paper and Floral Butterfly Paper Collection. Cut out a white frame with the decorative frame die from the Decorative Circle Frames. Cut out a white frame with the large eyelet circle die and medium eyelet circle die from the same set. Cut out a violet frame from the Floral Butterfly Paper Collection with the large eyelet circle die. Use dimensional adhesive and glue all of them as pictured. Stamp the sentiment in Majestic Violet ink and cut out.

Stamp 6 big blossoms from Sweet Magnolia Blooms Cling Stamp Set in mix of Lilac Posies and Lulu Lavender inks onto Deluxe Flower Shaping Paper, color them with the same inks, diecut with coordinating die and shape with mold. Adhere 3 layers of petals and add some Pastel Pearl Stamens to the centers. Stamp 5 branches and 2 leaves from Floral Butterfly Accents Cling Stamp Set in Tuxedo Black ink onto Deluxe Flower Shaping Paper, color with promarkers and diecut with coordinating dies. Stamp small butterflies from the Large Floral Butterfly Cling Stamp Set, stamp one bigger butterfly from the Small Floral Butterfly in Tuxedo Black ink onto Deluxe Flower Shaping Paper, color with promarkers and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach sisal, flowers, branches, sentiment and butterflies onto card as pictured.

Add some self-adhesive pearls. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Die cut machine; White pearls;

Instructions: Fold a 12 x 6” piece of White card stock in half making it a 6”x 6”, lay the largest die from the Floral Butterfly on top and let about a 1/8 inch hang over the top and run through the die cut machine. This will make the folded shape card. Die cut another of the same die out of white and adhere on top.

Stamp the Floral Butterfly imagine on white with the Black ink, lightly color the whole imagine with the Cactus flower and cut out with the coordinating die, ink the edges with the Deep Purple. Color the body of the Butterfly with some Coffee ink and the antlers in black. Add foam dots to the back and add to the card.

Die cut the wings of the Butterfly out of white card stock, add glue and glitter to the entire imagine and adhere on top of the Butterfly. Color the body with more of the Coffee ink, add Pearls as shown.

Other Products: White gel pen, sisal, hot glue, trimmer/scissors, versafine, clear heat emboss

Instructions: Cut whitestock card 10 x 6” and score landscape at 5”. Overhang the Large Floral Butterfly wings over the top edge of the score line and die-cut. Horizontally score the top butterfly at the point where the wings meet. Die-cut a full sized Large Floral Butterfly in white cardstock and 2x of the same size butterfly from Floral Butterfly Paper Collection and edge with Deep Purple. Adhere one to the inside/bottom of the card blank and one on the separate Large Butterfly.

Stamp on white cardstock Large Floral Butterfly, Floral Butterfly Accents and Wild Aster Spray with versafine and clear heat emboss, colour with Zig Clean Color Real Brush Markers and die-cut.

Stamp Wild Asters onto Deluxe Flower Shaping Paper in Deep Purple. Colour the petals in Sky Blue and centres in Vivid Chartreusse. Die-cut and edge with Deep Purple. Shape the petals with the golf tool and the Deluxe Flower Shaping Tool Set to cup the centres and make the buds. Buds are the small Wild Aster Petals stamped in Leaf Green onto Deluxe Flower Shaping Paper together with Leafy Accents and Wild Aster Leaf, colour with Vivid Chartreuse and die-cut, edge in Fern Green. Spritz and run through the 3D Leafy Accents Mold.

Adhere the Wild Aster petals together with hot glue and add buds or prills. Layer Wild Aster Spray 3x with dots and use as the stopper for the easel.

Shape the Large Butterfly wings to curl and adhere the body with dots. Adhere the lower wings with hot glue and hold until the glue sets. Adhere the Floral Butterfly Accents and Wild Asters with hot glue, and tuck in the sisal. Use Dries Clear to adhere to the easel card blank.

Add 3D lacquer and glitter to the Leafy Accents.

Other Products: Iris cardstock, white cardstock

Instructions: Cut a piece of white cardstock 6” x 12”, score at 6” along the long side and fold to create a base card 6” x 6”. Cut a piece of purple paper 5 7/18” x 5 7/8” and adhere to the front of the card. Cut a piece of white cardstock 5 5/8” x 5 5/8” and adhere to the front of the card. Cut a piece of light green pattern paper 5 1/2” x 5 1/2" and adhere to the front of the white cardstock.

Die cut the decorative circle die using the No. 4 die from the HCD1-7283 Courtyard Elegance Die set and the No. 2 die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock. Die cut a separate frame using the No. 2 die from the HCD1-7271 Rounded Window Frame Die set and the No. 1 die from the HCD1-7155 Circle Basics Large die set. Adhere the frame to the base circle dies. Die cut a circle out of purple pattern paper using the No. 1 die from the HCD1-7155 Circle Basics Large Die set and adhere to the back of the decorative circle die and then adhere to the front of the card.

Stamp the large butterfly image from the HCPC-3951 Large Floral Butterfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour With Zig Clean Colour Brush Markers and die cut with the No. 2 die from the coordinating die. Add Ultrafine Crystal glitter to all the decorations on the wings with Dries Clear Glue. Adhere to the front over the decorative circle die with foam dots as shown.

Inside card: Cut a piece of purple paper 5 7/18” x 5 7/8” and adhere to the inside of the card. Cut a piece of white cardstock 5 5/8” x 5 5/8” and adhere to the inside of the card. Cut a piece of light green pattern paper 5 1/2” x 5 1/2" and adhere to the front of the white cardstock.

Die cut the Happy Birthday sentiment from the HCD2-7351 Ironwork Sentiments Die set out of white cardstock. Die cut the outer die out from purple cardstock using the outer frame die and adhere the sentiment on and then adhere to the centre of the inside back.

Other Products: White Cardstock, Diecutting Machine, VersaMark, WOW Persian Indigo Embossing Glitter, Hot Glue Gun, Misti, Watercolor Paper, Sheer Shimmer Craft Spray Sparkle, Distress Oxide Inks Wilted Violet and Peacock Feathers

Instructions: Using the largest Large Floral Butterfly Die, place 1/4” above the fold of a 6 x 5” card base and cut. Using the same die, cut two more times, once from white cardstock and once from the Floral Butterfly Paper Collection, sheet 10B. Ink the edges of both using Distress Oxide Peacock Feathers ink, adhere together using dries clear adhesive and adhere to the butterfly shaped card base.

Stamp the Large Floral Butterfly image on watercolor paper using VersaMark, cover with WOW Persian Indigo Embossing Glitter and heat set using the Heat It Tool. Color the image using the Zig clean Color Real Brush Markers; Violet, Light Violet and Light Blue, diecut using the coordinating die and spray using sheer shimmer craft spray Sparkle. Lightly shape using the stylus and largest tip from the Deluxe Flower Shaping Kit. Diecut again from white cardstock, trim off the antennae and ink the edges of this diecut using Peacock Feathers ink. Adhere the two diecuts together using dries clear glue on the body and double foam dots on the wings. Adhere to the card base using glue on the body only.

Stamp the Small Wild Roses on Deluxe Flower Shaping using Majestic Violet ink, color with distress oxide Peacock Feathers and Wilted Violet inks, diecut using the coordinating dies, shape using the Small 3D Wild Rose Shaping Mold and the groove golf tools. Cover the Rose Hip stamen with dries clear adhesive and dip in the crystal clear glitter. Using the groove golf tool, pierce holes in each petal and insert Rose Hip and Rock Candynstamens Adhere three same size flowers together, making sure to offset them, using hot glue to create the wild rose.

Stamp the fern images from the Floral Butterfly Accents Cling Stamp Set on Deluxe Flower Shaping Paper using Archival Olive ink, color using Vivid Chartreause and Olive inks and diecut using the coordinating die.

Sponge the flower and leaves with dries clear adhesive, sprinkle with Rajni Chawla’s crystal clear glitter and adhere to the butterfly.

Diecut the ‘thank you’ Ironwork Sentiments Die and mat layer from white cardstock, color the sentiment using the Peacock Feathers and Wilted Violet inks. Ink the edges of the mat layer with the same inks and adhere to the inside of the card.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, clear gesso, white gesso, distress oxide spray peeled paint, pine needles, twisted citron and mowed lawn, stamping pad night of navy,

Instructions: Take a light green 12 x 12 sheet #7B. Start by applying a clear gesso on your sheet to protect it because you want to create a watercolor effect in your background that requires a lot of water. With a sponge, apply white gesso to soften the color of the paper. Then make droplets of green ink by shaking a brush gorged with ink over the sheet. Randomly stamp in library green butterfly stamps. Your background is ready.

Glue cheesecloth in the center of tour layout. Glue your picture over it with 3D foam to give dimension. Diecut a big butterfly from Deluxe Flower Shaping Paper and cut it in two. Glue wings under each side of your picture.

Die cut 2 circles from the decorative circles frame die. Stamp a sentiment on the smaller one. Ink the edge with bright tangelo and library green archival ink. Glue it with 3D foam down to your picture.

Make 4 wild aster flowers: Stamp using sunflower ink onto flower shaping paper, shade the rest of the flower using the same color. Die cut with the coordinating die. Give further shape with Deluxe flower shaping kit tools. Add white Prills in the center. Put a little bit of glue on the flowers with a sponge and dip them in the glitter to make them shine.

Make 6 French cottage flowers: Stamp using library green ink onto flower shaping paper, shade the rest of the flower using the same color. Die cut with the coordinate die. Give further shape with Deluxe flower shaping kit tools. Poke a hole in the center and add one blue stamen.

Make 4 big Zinnias flowers: Stamp using library green ink onto flower shaping paper, color the centre with manganese blue and shade the rest of the flower using library green. Color the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Add prills in the center.

Make 5 littles zinnias flowers: Stamp using night of navy ink onto flower shaping paper and shade the rest of the flower using the same color. Color the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flowers and add white stamens, secure with hot glue.

Stamp, cut and color fill-in flowers from the Floral Butterfly collection and insert in your bouquet.

Stamp little butterflies and color them with Zig Markers. Glue the butterflies on your flowers. For the final touch, add prills on your layout.

Other Products: Iris Cardstock, clear gloss gel medium, fun foam

Instructions: Cut a piece of white cardstock 8” x 7”, score at 3 1/2" along the 7” side and fold to create a base card of 8” x 3 1/2". Cut a piece of purple plaid paper 7 7/8” x 3 3/8” and adhere to the front of the card. Cut a piece of white cardstock 7 9/16” x 3 1/8”. Cut a piece of light green pattern paper 3” x 7 1/2" x 3” and adhere to the front of the white cardstock. Die cut three circles out using the No 5 die from the HCD1-7155 Circle Basics Large Die cut small frames out of purple pattern paper using the No. 4 and No. 5 dies from the HCD1-7155 Circle Basics Large Die and adhere to the circles as shown. Adhere this panel to the card front using fun foam.

Stamp the flowers and fern image from the HCPC-3952 Floral Butterfly Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Ultrafine Glitter using clear gloss gel medium. Trim the ferns and flowers and adhere to the insides of the circles as shown.

Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments Cling Stamp set in Jet Black ink on white cardstock. Die cut using the small rectangle die from the HCD-7203 Ornamental Tags Die set, mat with purple pattern paper and adhere to the centre circle as shown.

Stamp the butterfly images from the HCPC-3953 Small Floral Butterfly Cling Stamp Set and HCPC-3951 Large Floral Butterfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Ultrafine Glitter using 3D Crystal Lacquer. Add large butterflies to the top and bottom circles and a small one over the sentiment on the centre circle as shown.

Other Products: Dimensional adhesive, paper trimmer, die cutting machine, hot glue gun with stick

Instructions: This is a butterfly shaped easel card. To make the card base, fold a white card stock to fit the size of the butterfly die. Place the top of the die a little above the fold line on the top and pass it through the die cutting machine. This is the easel stand that is joint at the top. Cut another piece of butterfly die cut in luxe gold paper. Make a score line through the middle of the folded butterfly die cut and fold to make the easel stand. Adhere the gold butterfly die cut on the lower part of the folded front. Cut another piece of butterfly die cut in pastel background paper and adhere to the base of the easel card.

Stamp the butterfly image in jet black ink on deluxe flower shaping paper and colour with Zig real brush pens. Cut with matching die and adhere to the luxe gold butterfly.

Stamp the magnolia flowers and leaves with archival inks and cut with matching die. Shape and mold the flowers and leaves in 3d flower shaping mold. Colour the pastel white small stamens from the Bridal Bouquet set and colour them yellow with any yellow shade copic marker. Make a small bunch with 3-5 stamens. Add to the flower center. Then add some clear glue on them and put some Go Man Go prills.

On the base of the easel, add a white die cut, cut from the Swirly Accent Spray die set. On the die cut, arrange the yellow Magnolia Flowers and leaves.

To add glitter to the flowers and the butterfly, apply some designer dries clear glue and add 236 Clementine Ultrafine Transparent Glitter.

Other Products: Stickles- Diamond, Embossing Pad, White Embossing Powder, Paper Distresser, Color Bloom 2 Spray- Golden Oregano, irRESISTible Color Texture Spray- Bamboo Leaves, Natural Burlap String, Cardstock- White, Scrapbook Adhesives by 3L (Adhesive Dots Small, 3D Foam Squares, Crafty Foam Tape, E-Z Runner Ultra)

Instructions: The plaid patterned 12 x 12” paper is the background. Cut white cardstock to 11 x 11” and distress the edges. Cut the yellow patterned paper to 10.5 x 10.5”. Adhere these layers together. Mat the 2 photos in white cardstock. Stamp and die cut butterflies onto the purple patterned paper using an embossing pad and white embossing powder. Stamp and die cut 1 small butterfly onto yellow patterned paper also using an embossing pad and white embossing powder. Shape the butterflies slightly using the flower shaping kit. Add Stickles for some sparkle.

Stamp and die cut at least 15 of the fern images onto white cardstock using brown Staz On Ink. Using the Color Bloom 2 mister, mist all of the fern pieces. Let dry. Then splatter the leaves using dark green dimensional spray (irRESISTible Dimensional Spray- Bamboo Leaves). Let dry. Shape the fern leaves using your shaping tools.

Use a template to draw a circle onto the yellow patterned background. This will be used as a guide to create the wreath. Using adhesive dots add the fern pieces around the layout, overlapping to create the wreath. Adhere the matted photos in the middle of the wreath using foam tape. Find and die cut out the large purple tag and adhere above the mini photo and add a burlap string bow. Find and cut out the purple mini journal black and add to the right hand side of the matted photos. Add the butterflies below the matted photos, and one in the top right hand corner of the wreath.

Other Products: Clear embossing powder, black and white card, 7” square white card base, black versafine clair ink, foam pads, hot glue, raspberry rose and gunmetal shimmer shaker – cosmic shimmer, stamping card, Berry Burst ink – Stampin Up! Hot glue

Instructions: Spritz a 4” square piece of stamping card with water and sprinkle over with the shimmer shakers to create the butterfly centre. Set aside to dry.

Layer a 6.5” square black card and a 6.25” white card onto the card base with dries clear adhesive. Adhere a 5.5” square paper from the collection to a 5.75” black square of card and add to the card base using foam pads. Add nuvo drops to the corners of the paper and set aside to dry.

Die cut the decorative butterfly using white card and edge with berry burst ink, snip the wings free from the body.

Stamp the butterfly onto the shimmer card using black ink, cover with clear embossing powder, remove excess and heat to set. Die cut. Add the decorative wings to the solid wings of the butterfly using dries clear adhesive. Add adhesive to the decorative wings and sprinkle over transparent glitter, allow to dry and add to the centre of the card using hot glue.

Stamp the sentiment on white card using black ink and adhere to the card base using dries clear adhesive.

Other Products: Die cutting machine, watercolor markers,

Instructions: Cut black card base and fold with dimensions of 5 3/4" x 5 3/4". From the paper collection die cut a square with dimensions of 5 1/2” x 5 1/2" and glue. From the black paper, cut the element from the Rounded Window Frame Die set and glue it in the center of the base. From the paper collection, cut the round frame from the Courtyard Elegance Die and glue. From the same set of dies, cut an openwork frame from the black paper and glue.

Stamp the images from Floral Butterfly Accents Cling Stamp Set with Fern Green Archival Ink. Die cut the images using the matching die from Floral Butterfly Accents Die. Color with watercolor markers. Stamp the fern leaf with the Archival Ink Pad - Olive and color with the same shade ink. Stamp the image from Small Floral Butterfly Die Archival Ink Pad - Manganese Blue, cut out with a matching die and shade with purple ink.

Stamp Sentiment with black ink on a strip of paper Rajni Chawla's Vellum Flowerite - 10 Sheets.

Arrange everything as pictured. Finally, add sentiment, cover with glue and glitter.

Other Products: Lime Cardstock, Mint Cardstock, Vellum Paper, Versa Mark Embossing Ink, Pearls, Hot Glue Gun, Nida Tanweer Magic Glitter Powder, Funnel Tray, Lace, Scissors, Paper Trimmer, Die Cutting Machine, Rhinestones, Distresser Tool.

Instructions: Taking Deluxe Flower Shaping Paper folding in half and ready card base measures 9 by 5 3/4”. Trim paper from Floral Butterfly Paper Collection measuring 8 7/8 by 5 1/2” rough the edges using distresser tool and adhere onto the card base using designer glue. Cut another panel on white card measuring 8 1/8 by 4 7/8” and rough the edges, trim another panel on same pattern paper sheet from paper collection measures 7 7/8 by 4 3/8” rough the edges and adhere on to the white panel and add this layer onto the card base using clear glue.

Die cut 2 small and 2 large window frames from Rounded Window Frame Die, place circle dies inside to make window frame. Adhere same size frames together for the sturdiness using clear glue, apply clear glue on the front side using sponge and cover with magic glitter powder, add foam strips from the back side on the large frame and adhere this frame on the card base.

For the flowers stamp classic rose stamp with versa mark embossing ink on lime and mint cardstock, cover with embossing powder and heat using heat tool. Shape the flowers in shaping mold, finish with shaping kit and make roses. Apply glue and cover with magic glitter.

Stamp all required images on vellum from Floral Butterfly collection using versamark ink, cover with embossing powder and heat using heat tool. Color the images with Zig clean brush markers, cover with magic glitter powder.

Arrange all ready elements as shown. Add rhinestones and pearls for the finishing touch.

Other Products: White cardstock, Big-Shot Machine, Gold Glitter.

Instructions: Make base of the card from Elegant Swirl Gateway Die HCD2-7327 on white cardstock. From the same die, cut another layer of pattern paper from the Floral butterfly paper collection. Next, from the same die set, cut intricate layer of die on white cardstock and adhere it with foam tape. Cut another layer of die on pattern paper, as seen on picture.

Cut outer layer of butterfly die on white cardstock and adhere it using Designer Dries Clear Adhesive. Stamp Large Floral Butterfly Cling Stamp- HCPC-3951 on pattern paper using archival ink- Vibrant Fuchsia and cut it with coordinating die and add gold glitter, adhere it using foam tape. Cut the upper layer of intricate butterfly on white cardstock, add crystal clear glitter and adhere it using Designer Dries Clear Adhesive.

Other Products: Die Cutting machine, Trimmer or Guillotine, Score board, Scissors, Bone folder, Hot glue Gun, White card, Violet gems, Memento Dye Ink Pads - Dandelion, Grape Jelly

Instructions: Top fold card measures - 8 inches by 8 inches. To create a card base - cut out 16” x 8” piece of White card and score it at 8” (long side up), then fold using a bone folder along the score lines. Cut out 7 3/4” x 7 3/4” piece of HCPP1-438-2 White card and distress the edges with Memento Dye Ink Pad - Grape Jelly using HCDA1-449 Stack and Store Daubers and adhere it to the card front. Cut out 7 1/2” x 7 1/2” piece of HCPP1-438-2 White card and distress the edges with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Stack and Store Daubers and adhere it to the card front. Cut out 7 1/4” x 7 1/4” piece of HCPP1-438-2 White card and distress the edges with Memento Dye Ink Pad - Dandelion using HCDA1-449 Stack and Store Daubers and adhere it to the card front. Cut out 7” x 7” piece of HCDP1-2127 Floral Butterfly Paper Collection and distress the edges with Memento Dye Ink Pad - Grape Jelly using HCDA1-449 Stack and Store Daubers and adhere it to the card front.

Die cut decorative elements from HCPP1-438-2 White card using HCD1-7262 Swirly Border Accents Die, then distress them with Memento Dye Ink pads: Dandelion, Rose Bud, Lilac Posies and Grape Jelly using HCDA1-449 Stack and Store Daubers and adhere it to the card front as shown.

Stamp the butterfly image from HCPC-3953 Large Floral Butterfly Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Grape Jelly, then die cut it with matching HCD2-7352 Large Floral Butterfly Die and distress it with Memento Dye Ink pads: Dandelion, Rose Bud, Lilac Posies and Grape Jelly using HCDA1-449 Stack and Store Daubers. Shape it with fingers and adhere the final piece to the card front using Hot glue gun and 3D foam. Die cut decorative butterfly from HCGP1-488 Luxe Gold Cardstock using HCD2-7352 Large Floral Butterfly Die, then shape it using fingers and adhere it to the card front as shown. As a final touch, apply 3D1844 3-D Crystal Lacquer and 85-glitter Crystal Ultrafine Transparent Glitter 1/2 oz. on the butterfly and decorative swirl die cuts and adhere violet gems.