Instructions:

Adhere mat and layer from the Floral Banners Paper Collection sheet 7B onto 9B edged with Vibrant Fuchsia onto a DL card base (4 x 8 1/4”). Adhere 9B edged in Vibrant Fuchsia inside the card. Mat and layer Majestic Swirl Frames using Floral Banners Paper Collection 7B, 9B. Stamp onto white cardstock in Vibrant Fuchsia ‘With all my Love’ edge all in Vibrant Fuchsia, adhere inside the card.

Stamp onto white cardstock in versafine onyx and clear heat emboss Vining Clematis Banner Cling Stamp. Die-cut using coordinating die and colour with Zig Clean Color Real Brush Markers. Adhere portrait 2 Vining Clematis strips (there will be a small gap in the middle which will be covered by the sentiment) using dimensional dots.

Stamp onto white cardstock in Jet Black ‘In Sympathy’ and die-cut using the sentiment strip.

Adhere a further 3 blank sentiment strips together then onto the banner. Adhere over the gap on dots.

Add gems for a little sparkle.

Other Products: Paper trimmer, gems, versafine, clear emboss powder

Instructions:

Card size: 6 x 6”. Cut a shaped Octagon card by placing the top edge of die (Simple Centerpiece Die) slightly over the top fold of a folded 6 x 6” white card (The edge of die only has to avoid being on paper but can butt up to fold). Cut a full Octagon using the light green decorative paper then glue it to the card front.

Cut from white, the Elegant Heart Centerpiece dies, cut a plain white octagon to go under the inner decorative octagon, pop it up with foam then glue it to the center of card.

Find the 2 (1 size apart) Simple Centerpiece octagons that will fit along the line that runs through the center of the hearts in the die cut design then make a frame to pop up using some light green decorative paper with a bit of clematis design on it. Adhere it to the card front over the line the same size. Add pearls to each angle.

Stamp Vining Clematis Banner using black ink, die cut then color. Stamp For My Friend using black ink on a separate piece of white cardstock then die cut with the center banner die. Adhere pop ups under the sentiment then place it in the center of the Vining Clematis Banner. Add pop ups to the back of the Clematis then adhere it to the decorative white die cut in the center of the card.

Use glitter or Stickles to glitter just the purple part of the Clematis flowers.

Other Products: White cardstock, pearls, Stickles, foam sheet, Colored pencils in purples, greens and yellows.

Instructions:

The pink and light green patterned paper is the background for the 12 x 12" layout. Cut a strip of the green patterned paper that is 1.5 x 12" and tear both ends. Then cut a strip of the plaid patterned paper that is 0.5 x 11.5". Adhere these strips to the right of middle of the background. Find and cut out the teal border strip and adhere it across the bottom of the layout.

Die cut the Majestic Swirl Frame die from white cardstock and the mat for it from light green patterned paper. Adhere these layers together, then adhere them to the layout using foam tape. Mat the cropped 4 x 6" photo in white cardstock and add to the frame using foam tape. Find and die cut out the 2 small tags and add them to the left of the matted photo and add burlap string bows to each.

Stamp and die cut 2 of the Vining Clematis Banner in brown ink (Staz On- Timber Brown) and 2 more in dark purple ink (Distress Ink- Dusty Concord). Add color to the leaves of the brown ink images using Zig Clean Color Markers and a waterbrush (Pale Green, Blue Grey). Add color to the flowers on the brown ink stamped images using Distress Oxide Ink and a waterbrush (Wilted Violet).

Add color to only the larger flowers of the purple ink stamped images using Wilted Violet and a waterbrush. Fussy cut out the larger flowers you just colored and add them to the other brown ink stamped images using foam squares.

Snip one of these in half and add to either side of the matted photo. Die cut the mat for the banner image from white cardstock. Add the colored image onto the mat using foam squares. Then die cut out the title using the Letters and Numbers die, from Luxe Gold Cardstock. Add the title to the middle of the banner using liquid adhesive. Add the title banner to the left of the matted photo on the border strip.

Other Products: Burlap String, Cardstock- White, Distress Ink- Dusty Concord, Distress Oxide Ink- Wilted Violet, Waterbrush, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Dual Tip Glue Pen, E-Z Runner Ultra)

Instructions:

Prepare a 5 1/2" x 4 1/4" white card base. Cut another piece of white cardstock 1/4" smaller and dry emboss with an embossing folder. Adhere on top of the card base.

Stamp the Elegant Rose Banner on white with the black ink. Use the Zig Markers to color. Cut out with the coordinating die. Place foam dots on the back and adhere to the center of the card. Stamp the Celebrate Love Sentiment on the white card stock and cut out with the center die from the Elegant Rose Banner die set. Add foam dots to the back and adhere to the top of the colored imagine.

To finish, add glitter to the flowers and leaves.

Other Products: Paper Trimmer, Die Cut Machine, Darcie Embossing Folder,

Instructions:

Create base using outside die Royal Elegance Frames Die cut two pieces from white cardstock, glue it together on the top, using this same die cut from designer collection paper and place into card using Designer Dries Clear Adhesive. Cut frame using smaller die. Cut out the piece from paper collection and silver paper and adhere to the front of the shaped card using Adhesive Foam Strips for dimension. Using this same die and the middle one, cut from silver paper frame and glue it to the base as shown.

Stamp Vining Clematis Banner Cling Stamp Set on the piece of white paper with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Special Birthday Sentiments stamp on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Tent card measures - 6 inches by 6 inches. To create a 6” x 6” tent card base - cut out a 12” x 6” piece of HCPP1-438-2 White card and score it at 6” (long side up), fold using a bone folder along the score lines. Cut out 3” x 6” piece of HCPP1-438-2 White card and score it at 1/2”, 1 1/2” and 2 1/2” (short side up), fold it using a bone folder along the score lines.

Cut out 6” x 6” piece of HCDP1-2133 Floral Banners Paper Collection and adhere it to the card front, then cut the circle from HCD1-7313 Festive Snowglobe Die and assemble the card base. Die cut decorative square from HCPP1-438-2 Paper Pack of 10 - White with HCD1-7283 Courtyard Elegance Die HCD1-7281 and Stairway Gardens Die, then distress the edges with Memento Dye Ink Pad - Rose Bud using HCDA2-450 Daubers and adhere final piece to the card front.

Stamp the rose banner from HCPC-3968 Elegant Rose Banner Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper Pack of 25 - White using Memento Dye Ink Pad - Lilac Posies and colour it with Memento Dye Ink Pads - Bamboo Leaves and Rose Bud using HCDA1-450 Daubers. Using a sponge add Designer Dries Clear Adhesive to the banner, sprinkle it with Glitter, then adhere it to the card as shown.
Stamp the sentiment of HCPC-3847 Celebrate Love Sentiments Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper Pack of 25 - White using Memento Dye Ink Pad - Lilac Posies, then die dut it with matchingHCD1-7376 Elegant Rose Banner Die. Distress the edges with Memento Dye Ink Pad - Rose bud using HCDA1-449 Daubers using HCDA2-450 Daubers. Using a sponge add Designer Dries Clear Adhesive to the banner, sprinkle it with Glitter, then adhere it to the card as shown.

Stamp the classic rose leaves from HCPC-3752 Classic Rose Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper Pack of 25 - White using Memento Dye Ink Pad - Olive Grove and colour them using Memento Dye Ink Pads - olive grove and Bamboo Leaves using HCDA1-450 Daubers and die cut them with matching HCD1-7110 Classic Rose Die. Place the leaves in HCFB1-462 3D Rose Shaping Mold , spray them with water and run them through a die cutting machine, then shape them using HCST1-401 Deluxe Flower Shaping Kit. Using a sponge add Designer Dries Clear Adhesive to the leaves, sprinkle them with Glitter and, then adhere them to the card front as shown.

Stamp wild rose petals from HCPC-3906 Small Wild Rose Cling Stamp Set on HCFS1-465 Art Foam Paper-10 Pack using Ranger Archival Ink Pad - Majestic Violet, then colour them in with Ranger Archival Ink Pads - Majestic Violet and Vibrant Fuchsia using HCDA1-450 Daubers and die cut them with matching HCD1-7110 Classic Rose Die. Shape the flower petals using Heat It Craft Tool and HCST1-401 Deluxe Flower Shaping Kit, then assemble the flower petals using a hot glue gun and adhere them to the card front as shown.

Decorate the card using pink gems and as a final step, fill in the composition with HCS1-490 Rose Hip Stamens - Large and glitter the flowers.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, Bone folder, Pink 3 mm gems, White Cardstock

Instructions:

Score a 11" x 4 1/4" piece of Deluxe Flower shaping paper at 5 1/2" and fold it to create a 4 1/4" x 5 1/2" card base. Take a 4" x 5 1/4" Deluxe Flower shaping paper and emboss it using Crafter's Companion Regency Swirls 3D Embossing Folder. Adhere it on the card base. Stamp the sentiment from Celebrate Love Sentiments Cling Stamp Set in the center of a 1 1/2" x 4" piece of white cardstock using Library Green Archival ink. Adhere it on the card base as shown.

Stamp the image from Vining Clematis Banner Cling Stamp set on a piece of watercolor cardstock using Jet Black Archival ink. Color it with DOMS brush pens using koi waterbrush. Die cut this colored image using matching dies from Vining Clematis Banner Die. Cut 2 more pieces of white cardstock using the same die and adhere all of them together. Adhere this on top of the sentiment label to finish off the card.

Other Products: DOMS Brush Pens, Koi waterbrush, watercolor cardstock and Crafter's Companion Regency Swirls 3D Embossing Folder.

Instructions:

The ready top fold card from the smooth white cardstock measures 7″ by 7″. To prepare the top panel, choose the light color plainer paper from the designer paper collection and cut it to size measuring 6 3/4″ by 6 3/4″. Dry emboss it using an embossing folder and layer the embossed panel on the card front using foam tapes.

Using Simply Elegant Centerpiece Die, cut one piece each in white and Luxe gold cardstock. Glue them together keeping the gold one at the back a little off-center creating a shadow. Next, take the first and the third largest die from the Simple Centerpiece die set and cut a frame from white cardstock. Diecut the 2nd largest of the Simple Centerpiece die set cutting from the same sheet as your background sheet. This will create a backer for the white frame. Adhere ribbon as shown. Diecut using the 5th largest Simple Centerpiece die, to cut an aqua octogon from the paper collection.

Layer the frame using foam dots on the card panel as shown. Next layer the centerpiece die-cut on top giving it a double layer of foam tape.

Stamp the image from the Peony & Sunflower Banner Cling Stamp Set on white cardstock using black archival ink and paint the image using Zig Clean Clear Brush Markers. Die-cut the image using its coordinating dies, securing the sentiment window die. Cut a cover die for the same and stamp the sentiment using black archival ink. Layer the colored banner with an open window as shown and finally layer it on the card front.

Stamp a couple of smaller floral images from Small Wild Rose on vellum. Next, heat set the images and cut them using their coordinating dies. Color the Roses using Worn Lipstick distress oxide ink. Shape the roses in their coordinating mold and flower shaping kit. Add prills to the flower centers.

Stamp Leafy foliage from Leafy Accent stamp set with Olive green on flower-making cardstock and cut them using its coordinating die set. Paint the leaves using Leaf Green Archival ink and shape them using golf groove tools. Once all the elements are ready, assemble small clusters of flowers as shown and finish the card by adding sparkles.

Other Products: Smooth white cardstock, Score Board, Die Cutting machine, Tacky glue, Glossy Accent, Foam Tape, Adhesive that dries clear, Hero Arts White Pigment Ink, Distress Oxide Worn Lipstick, Heat Tool, and Embossing Folder.

Instructions:

Other Products: Smooth White Cardstock, Neenah Solar White Cardstock, Sea Grass Archival, Bundled Sage Distress Ink, Copic Markers

Instructions:

Make a card base from white card stock. Cut white card stock measuring 10” x 7”. Score at 5” mark on the longer side and fold to make a vertical standing card. Cut a mat layer from the pattern paper a little smaller than the card front and adhere to the card.

Cut a piece of white card stock measuring 2 1/2" x 7 “ and add a mat layer from the paper collection a little smaller than the card piece. Adhere this on the card piece and adhere the whole piece on the left side of the card front, leaving a little  gap on the right side to tuck in the second panel.

Make the second card panel by cutting an A2 card panel design from the pattern paper. Add a mat layer of white card, a little bigger than the card panel and adhere it on the card, tucking it inside the card strip so that only some part of it is showing.

Cut two pieces of Decorative pocket and Accents die from white card stock. Trim it to remove the upper curved design and tuck in the die on both sides of card strip.

Stamp the Rose Floral banner image on the deluxe flower shaping paper with Jet black  ink and color with Zig Real brush pens. Cut with matching die. Trim the image into two pieces. Add the pieces on two sides of the card strip using dimensional tape.

Stamp the rose flower image using the biggest stamp with Pink Peony Archival ink on deluxe flower shaping paper. Color with Pink Peony archival ink using sponge daubers and cut with coordinating die. For making one big flower, use two small three medium and two big size flowers. Shape and mold the flowers in the 3D flower shaping mold for Rose flower. Make the Rose flower in different sizes. Similarly make smaller filler flowers using the smallest flower and leaf green ink.

Stamp the leaf image from the Leafy accent stamp set using Leaf green ink on Deluxe flower shaping paper. Color the leaves using the same ink using sponge daubers. Cut the image with matching die and shape them in the 3D flower shaping mold for Leafy accent.

Arrange the Roses and leaves on the card using hot glue gun.

Stamp the sentiment in jet black ink on white strip of paper and add to finish the card.

Other Products: Die cutting machine, scoring board, hot glue gun

Instructions:

Mat and layer to fit DL card base (4 x 8 1/4”) Floral Banners Paper Collection sheet 6B onto sheet 12B edged with Vibrant Fuchsia. Adhere 6B edged with Vibrant Fuchsia to the inside of the card. Die-cut Eyelet Lace Frame in 12B edged in Vibrant Fuchsia and adhere to the inside of the card. Die-cut Eyelet Lace Frame in white, stamp and edge in Vibrant Fuchsia ‘It’s Been a While’ sentiment and adhere to the inside of the card.

Stamp onto white cardstock in versafine onyx and clear heat emboss, Peony & Sunflower Banner, Peony Bud and Blossom and leaves from Large Sweet Peony. Die-cut and colour leaves in Vivid Chartreuse, Leaf Green and Fern Green.

Use Zig Clean Colour Real Brush Markers and water pen to colour the banner and flowers. Die-cut Ornamental Tag from the Floral Banners Paper Collection 12A, mask off to stamp ‘Hug’ onto the tag in Jet Black, edge with Vibrant Fuchsia. Adhere a bow using hot glue.

Stamp in Jet Black onto white cardstock ‘sending you a hug’ setiment die-cut with Peony & Sunflower sentiment strip, edge in Vibrant Fuchsia. Stamp a further 3 blank white sentiment strips, adhere together then directly to the banner.

Loop ribbon cord onto the front of the card prior to die-cuts using Dries Clear adhesive and dots for dimension, adhere the Peony & Sunflower Banner across the bottom of the card on triple dots.

Add some gems and Wink of Stella to Peony & Sunflower Banner for sparkle.

Other Products: Paper trimmer, hot glue, versafine onyx, clear heat emboss powder, ribbon cord, bow, gems, Wink of Stella Clear

Instructions:

Create card base by using large Simple Centerpiece Die. Cut one large simple centerpiece die on white cardstock and on pattern paper also from the Floral Banner Collection HCDP1-2133, adhere it on card base.

Cut one die from Elegant Hearts centerpiece Die HCD1-7369 on white cardstock and adhere it using foam tape. Cut another layer of die from the same set on pattern paper, adhere it using foam tape.

From the same set cut another intricate die on white cardstock and adhere it using designer dries clear adhesive, as shown.

Stamp one image from Vining Clematis banner Cling Stamp Set on white cardstock using archival ink-jet black, cut it with coordinating die and color clematis flowers using zig markers, add crystal clear glitter. Stamp sentiment from Celebrate Love Sentiments Cling Stamp Set using archival ink-jet black, adhere using foam tape.

Stamp some clematis flowers from Clematis Cling Stamp Set HCPC-3954, on deluxe flower shaping paper using archival ink-cactus flower and library green for leaves and cut with coordinating die. Color with cactus flower, vibrant Fuchsia and leaf green, library green for leaves. Shape them using 3D Clematis shaping mold. Add Gala Glitz-Mauvie at the centre and sprinkle crystal clear glitter.

Other Products: Big Shot Machine

Instructions:

Card size is 9 inches by 6 inches. It is a ready folding card. Cut a panel on Deluxe card measuring 5 7/8 by 8 7/8" adhere it on card base using dimensional tape. Trim pattern paper from Floral Banner Paper Collection and adhere on to the card base using clear glue.

For the shaker windows, take 7, 8 and 9 size of octagon die from Simple Center Piece Die Set. Place all three sizes of octagon die on Deluxe paper and make 6 frames of both sizes. adhere 5 frames of same size all together using clear glue and make solid frame, die cut 2 octagon on Floral Banner Paper sheet number 8B using die size 7 and 8. Adhere this octagon shape from the back side of the solid octagon frames using clear glue. Die cut 2 octagon on clear card using die size 7 and 8 and set aside. Put mini prills inside the octagon frame with rhinestones and sequins and cover this octagon frame with clear octagon die cut using clear glue. Apply clear glue on the remaining frame using brush and cover with Nida Tanweer Magic Glitter powder and adhere this frame on the clear window to complete the shaker window frame.

Stamp Elegant Rose Banner on Deluxe Paper using Magenta Hue Archival Ink and die cut using coordinating die, diecut shadow die of the same banner and stamp the sentiment 'Birthday Love' with using same ink on the shadow die, add foam dots on the back of banner die cut and add on the shadow banner.

For the flowers stamp the classic rose flowers stamp on pink and mint cardstock using versamark embossing ink, cover with white embossing ink, heat using heat tool and cut all flowers using coordinating dies. Shape the flowers using shaping mold and shaping kit and make a few flowers. Apply clear glue on all images including flowers and embellish with magic glitter powder.

Stamp all required small branches from Summer Wreath Accents Stamp Set on floral banner paper using magenta hue ink and die cut using coordinating dies.

Die cut small decorative branch from Cut Mat Create die set on deluxe card 2x and shape it from the back using shaping kit.

Arrange all ready elements as shown using hot glue gun and clear glue. embellish the card with pearls and beads.

Other Products: Versamark Embossing Ink, Pink Cardstock, Mint Cardstock, Hot Glue Gun, Die Cutting Machine, Pearls, Beads, Rhinestones, Sequences, Brush, Nida Tanweer Magic Glitter Powder, Dimensional tape.

Instructions:

Create a 6 x 6" card base in white cardstock. Cut a 5.75 x 5.75" piece of blue pattern designer paper from the Floral Banners Paper Collection, distress with Garden Patina and adhere to card front.

Cut a 5 x 5" piece of white cardstock, cut a 4.75 x 4.75" piece of teal designer paper from the Floral Banners Paper Collection, distress with Garden Patina and adhere to white mat, adhere to adhesive backed foam and adhere to card front.

Cut the doily die from the Simply Elegant Centerpiece Die in white cardstock and adhere.

Stamp the Rose banner from the Elegant Rose Banner Cling Stamp Set in Jet Black on Bristol Smooth paper, color with Zig markers and cut out with coordinating dies. Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set in black on the center piece. Adhere the rose banner with foam tape to the center and the sentiment without dimension.

Stamp the Classic Rose Cling Stamp Set in Vibrant Fuchsia, cut out with coordinating dies and sponge with same, sculpt with the 3D Rose Shaping Mold and add glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with Vibrant Fuchsia and Olive and cut out with coordinating dies, sculpt with the 3D Leafy Accents Shaping Mold.

Arrange and adhere flowers and leaves along bottom as seen in photo.

Other Products: White cardstock, adhesive backed foam, Bristol Smooth Cardstock

Instructions:

Prepare a square base that is folded to 5.25 '' x 5.25 ''. From the white cardstock, cut a 5" x 2.5" rectangle. Glue on the left side, leaving a small margin from the edge of the page. From sheet 12B Floral Banners Paper Collection, cut a 5" x 2.5" rectangle. Glue on the right side as shown. From the white cardstock, cut out a decorative border from the HCD1-783 Border Essentials kit. Trim to the correct dimensions. Glue as shown, leaving a small gap between them.

From the 5A Floral Banners Paper Collection, cut one of the inner frames from the Royal Elegance Frames Die Set HCD2-7307.

On a white cardstock, stamp the image of a floral banner from HCPC-3969 Vining Clematis Banner Cling Stamp Set using Jet Black ink. Cut with a matching die. Color with felt-tip pens or markers using shades of pink with the addition of yellow and green. Glue in the central part using 3d foam dots.

Stamp the sentiment from the Special Birthday Sentiments Cling Stamp Set HCPC-3843 on the white cardstock using Vivid Chartreuse color. Cut with a banner from the Arrows and Banner Die HCD1-7204 set. Glue using foam dots as shown. And it's ready!

Other Products: Cutting machine, paper trimmer, felt-tip pens or markers

Instructions:

Cut a piece of white cardstock 5.5 x 11", score at 5.5" and fold to get a square base. Cut two pieces of paper from the Floral Banners Paper Collection to 4.5 x 5 1/4 and 3/4 x 5 1/4". Cut out two white tags with the Large Tag 1 from the Album Tags and Accents die set and two peach tags with Large Tag 2 die. Cut out two white Delicate Flourish from the Cut Mat Create 2A die set. Adhere them to the base using adhesive tape.

Stamp the sentiment in Coastal Coral ink using Just For You Sentiments stamp and cut it out with the Elegant Rose Banner Die. Stamp the Elegant Rose Banner with the Elegant Rose Banner Cling Stamp Set in Tuxedo Black ink, color it with promarkers and cut out with coordinating dies. Adhere them together and to the base with adhesive tape.

Stamp blossoms from Small Wild Rose Cling Stamp Set in Coastal Coral ink onto Deluxe Flower Shaping Paper, color their centers with the same ink and diecut with coordinating dies. Shape all flowers using their coordinating shaping mold. To big flowers add some pearl stamens, to small flowers add some Lettuce Entertain You Prills. Cut out two white Large Vine from Cut Mat Create 2A and color them with promarker. Stamp 2 leaves from Classic Rose Cling Stamp Set in White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and the banner.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal , self-adhesive pearls, promarkers

Instructions:

My finished card size is 4 1/4" X 5 1/2". Make card base using white cardstock and cover with one of the card fronts on Sheet 2A. Measure the inside rectangle of the card front and cut a piece of Sheet 10B to fit that size and use dimensional tape to adhere to card front.

Stamp the Sunflower Banner using Tuxedo Black Memento ink and use the coordinating die to cut out.

Stamp Sunflower petals using Cantaloupe ink and color using Dandelion, Sunflower and Rhubarb Stalk ink. Use coordinating die to cut out the petals. Stamp the leaves in Fern Green ink and color using Leaf Green and Olive ink and use coordinating dies to cut them out. Lay the petals and leaves onto the mold and spritz with water and run through the die cut machine. Turn them out onto desk to dry. When they are dry cut the flower petals into two pieces and using hot glue, glue them together to form the partial flowers for the front of the banner. I used hot glue and some home made center material to make the flower centers.

Using hot glue adhere the flowers and leaves to the banner and set aside. Cut out the sentiment piece and stamp the sentiment onto it. I used Scor-Tape to adhere to the front of the banner. I colored the little butterfly with Rhubarb Stalk and Leaf Green inks and then glue to the front of the banner.

Using a piece of Hydra Sponge and glue add glitter to the flower petals, leaves and the cute little butterfly. Set aside to dry. The card is finished.

Other Products: Die Cut Machine, Dandelion Memento Ink, Hot Glue Gun, Dimensional Tape, Scor-Tape

Instructions:

Card size: 4 3/4 x 6 1/4". Use the other die of the Royal Elegance die set to cut a piece of heavy weight white cardstock then score and fold in half. Cut another outer die from light purple decorative paper. Cut it in half to cover the front of the card then glue it down. Cut the decorative large die from white and also cut the decorative large oval from white twice (for strength). Glue the 2 ovals together then glue a foam sheet oval under it to pop it up. Cut the large decorative rectangle die cut in half then glue it to the front over the light purple. Glue the popped up oval bottom half to the card front, top half stands up over fold. Cut a smaller plain oval from light purple then glue it to the decorative white oval.

Stamp and die cut the sunflower banner including bee and butterfly, color with colored pencils. Glue it to the center of the decorative oval. Stamp sentiment on white using black ink, die cut then pop it up over center of banner.

Stamp Rustic Sunflowers using Peanut Brittle, sponge with Sunflower, die cut then shape in the mold. Glue 2 of each size together to form flowers. Glitter the flowers with Crystal Clear, add Redland Elements to the centers.

Stamp leaves using Fern Green, sponge with Leaf Green, die cut then shape in the mold. Glaze leaves with lacquer. Arrange flowers and leaves at the bottom right of folded base under the decorative oval.

Glitter the card then add pearls.

Other Products: White cardstock, pearls, foam sheet, Colored pencils in yellows, greens, browns, purple and blue

Instructions:

This tent fold card measures 6“ x 6“ when completed. Taking the white card stock to make a card base to the above measurements. Cut a matting layer a little smaller than the card front from the design paper sheet 2B in the collection pad. Using the pattern making tracing tool, the ruler and the foam mat to make holes along the paper edge. When done, adhere this to the card front using 3D double sided foam tape.

Taking the white card stock and the Petite Pocket Accents Die set to make the two lacy frames. Ink the frames with the Venetian Orange ink and the aid of a dauber. Taking the hydra sponge dab a little adhesive over the two frames then sprinkle glitter over them. When dry tap off the extra glitter ready for use. 

Using the Sunflower banner stamp and the sepia ink, stamp the image. Do this twice. Die cut the stamped images with the matching dies. Use the archival inks, Sunflower and Venetian Orange to color the Sunflower, the leaves are colored with the Leaf Green ink. Stamp the sentiment on one of the banners with the sepia ink. The other banner, fussy cut this banner so the ends are away and cut in half in the length so you have two sunflower halves. Adhere each half behind the sunflower in the banner with the sentiment. Do this with the double sided 3D tape or double dots.

Adhere the fancy lace frames to the card front with clear drying adhesive, align them so they will be in the middle of the card and behind the sunflower banner. Adhere the sunflower banner in place with double sided 3D tape or double dots.

Make two triple bows from the organza ribbon then adhere these in place at both ends of the sentiment banner using the hot glue gun.   

Other Products: Ranger archival Venetian Orange ink, Cream Organza Ribbon, Fussy Cutting Scissors, Ruler, Pattern Making Tracing Tool, Foam Matt, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun.

Instructions:

This tent fold card measures 6“ x 6“ when completed. Taking the white card stock to make a card base to the above measurements. Taking the sheet 2B from the collection paper pad, cut this a little smaller than the card front. Using the pattern making die cutting tracing tool, a ruler and a foam pad make holes along all the edges of the paper. Adhere this to the card front using 3D foam tape or double dots.

Taking the gold card stock and the diamond die, die cut the lace frame. Adhere this to the centre of the card front using the 3D foam tape or double dots.

Make the sentiment banner by taking the white card stock, the sunflower stamp and the sepia ink. Stamp the image then color the sunflower and leaves with the Venation Orange, leaf green and library green ink with the aid of a dauber.

To make the 3D sunflowers, use the rustic stamp set and the sepia ink, Stamp two layers for each flower. You will be needing 1x large size, 2 x med size and 2 x small size sunflowers for this card. Color the flowers with the Venation Orange and sunflower ink. Die cut the shapes by using the matching die sets. To shape the flowers use the 3D mold for this collection. Adhere two petal layers together, next apply a little adhesive to the sunflower centre then sprinkle the black sand to the flower centre. When dry, tap away any excess sand. Next apply a little adhesive to the sunflower petal edges with the hydra sponge then sprinkle glitter on the adhesive, when dry tap away any excess glitter ready to use. Adhere the sunflowers to each side of the banner ends.

Make the letters for the sentiment by using the Letters & Numbers die set, the gold and the white card stock, (the large letter font is used) Die cut four layers for each letter from the white card stock then die cut one layer for each letter from the gold card stock. Adhere all together using the clear drying adhesive and the aid of the quick stick tool. Adhere the sentiment letters across the banner. It is helpful to use the quick stick tool to aid in setting the letters straight across the banner. Color the bee and butterfly with the sunflower, leaf green and red geranium inks. Shape them a little with the deluxe flower shaping tools and adhere them to the card with the hot glue gun.

Make a triple bow from the organza ribbon. This is adhered under the banner sunflower by using the hot glue gun..

Other Products: Cream Organza Ribbon, Fussy cutting Scissors, Ruler, Black Sand, Pattern Making Tracing Tool, Foam Mat, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Ranger Archival Venation Orange ink.

Instructions:

Cut a piece of white cardstock to 9 x 8 1/4", score at 4.5" and fold to get a slim base. Cut two pieces of patterned paper from the Floral Banners Paper Collection, one to 3 13/16 x 8" and the other to 3 5/8 x 7" and a little bigger piece of white cardstock, adhere them to the card. Cut out a white frame and two white corners with Album Tags and Accents. Cut out a Decorative Eyelet Accent 2 from the Floral Banners Paper Collection. Adhere them together and to the base using adhesive tape.

Stamp the sentiment in Fern Green ink and Celebrate Love Sentiments stamp and cut it out with the Peony & Sunflower Banner Die. Stamp the Sunflower Banner with Peony & Sunflower Banner Cling Stamp Set in Tuxedo Black ink, color it with promarkers and cut out with coordinating dies. Adhere them together and to the base with adhesive tape.

Stamp blossoms from Rustic Sunflower Cling Stamp Set in Sunflower ink onto Deluxe Flower Shaping Paper, color them with Buttercup ink and diecut with coordinating dies. Shape all flowers using their coordinating shaping mold and add some Ribbit Prills to their centers. Stamp 7 Round Leaves Branches from Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink onto Deluxe Flower Shaping Paper, color them with the same ink and diecut with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal , self-adhesive pearls, promarkers

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10 1/2" x 6 1/4", score at 5 1/4" along the long side and fold to create a base card of 5 1/4” x 6 1/4". 

Cut a piece of gold cardstock 5 1/4" x 6 1/4".  Cut a piece of white cardstock 5 1/8” x 6 1/8” and die cut the decorative semi-circle dies using the No. 3 die from the HCD2-7338 Lattice Flourish Gateway Die set to create a decorative circle. Adhere to the gold cardstock. Die cut 4 decorative corners out of gold cardstock using the corner dies from the HCD1-7213 Elegant Pocket Accents Die set and adhere to the four corners.  Die cut the eyelet circle out of gold cardstock using the large eyelet circle die from the HCD2-7306 Decorative Circles Die and adhere to the middle of the card.  Die cut a plain circle out of white cardstock using the No. 2 die from the HCD1-7155 Circle Basics Large die set and adhere to the gold eyelet circle.

Stamp the sunflower, bee and butterfly image from the HCPC-3970 Peony & Sunflower Banner Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the image with Zig Clean Colour Real Brush Markers and colour pencils and die cut with the coordinating die. Add Wink of Stella to the images and adhere to the front of the circles as shown. Add the bee and butterfly as shown on the sunflower. 

Cut a piece of gold cardstock 5/8” x 6”. Cut a piece of white cardstock 1/2" x 6” and adhere to the top of the gold strip. Adhere to the card in the centre of the banner as shown. Score at each end and fold over the sides.  Adhere the completed card front to the base card front.

Die cut the letters for the Thank You sentiment out of gold cardstock using the HCD2—7371 Letters and Numbers Die. Adhere the letters to the band using cling wrap for accurate placement of letters.

Stamp the leaf images from the HCPC-3962 Rustic Sunflower Cling Stamp Set in Northern Pine ink on Deluxe Flower Shaping Paper. Colour with Garden Patina ink and die cut with the coordinating die.  Colour the back of the leaves with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium and adhere to the bottom and right of the card as shown.

Stamp the sunflower images from the HCPC-3962 Rustic Sunflower Cling Stamp Set in Tiger Lily ink on Deluxe Flower Shaping Paper. Colour the petals with Buttercup ink and the centres with Tiger Lily ink and die cut with the coordinating dies. Colour the backs of the flowers with Buttercup ink and shape using the coordinating mold. Add Crystal Clear glitter to the petals with clear gloss gel medium and gold Gala Glitz to the centre of the flowers. Adhere the flowers over the leaves as shown.

To finish, adhere some iridescent gems to the decorative die as shown.

Other Products: Iris cardstock, Prismacolour Pencils, clear gloss gel medium, iridescent gems, gold Gala Glitz, Wink of Stella - clear

Instructions:

Cut a 5.75” x 5.75” base out of white paper. Then, from the paper collection, cut a square 5.50” x 5.50" glue it to the base. From white paper, cut a smaller frame from the Courtyard Elegance Die set, then cut out a circular frame from the paper collection and glue it to the card. From white paper, cut a smaller openwork frame and glue it to the card.

Stamp the sunflower from the Peony & Sunflower Banner Die set twice on white paper with black ink. Color the sunflower with yellow ink and the leaves with a green watercolor marker. Cut with the coordinating die and then one sunflower with scissors. Shape with the Deluxe Flower Shaping Kit. Use the glue to connect the flowers, glue inside and add brown Prills. Color the bee yellow.

Cut a strip from the paper collection with a die from the Peony & Sunflower Banner Die set and use black ink to stamp the sentiment from the Just for You Sentiments set.

Arrange all the elements as shown. Cover with glue and sprinkle with glitter.

Other Products: paper trimmer, die cutting machine, watercolor marker

Instructions:

Score and fold a 5.75” x 11.5” piece of white card in half and use the 2nd largest simple centrepiece die to create a shaped card base. Die cut the largest simply elegant centrepiece die from white card and paper from the collection, adhere together and adhere to the front of the card base.Diecut the simply elegant decorative die with white card and sponge dries clear adhesive over the diecut, sprinkle with crystal clear glitter and adhere to the card base.

Diecut the largest solid clematis floral border with paper from the collection and white card, adhere together and add to the card using foam pads.

Stamp the clematis floral border onto white stamping card using paradise teal ink and colour using zig watercolour makers:- light pink, light blue, persian green. Diecut using the decorative centre die. Add to the centre of the card using foam pads. Die cut the sentiment using the letters & numbers die and adhere to the centre of the floral border.

Stamp the clematis onto vellum using paradise teal, cover with bridal tinsel embossing powder, remove excess and heat to set. Die cut and shape by pinching the petals together. Poke a hole in the centre of each set of petals and thread through 10 sets of stamen, secure using hot glue. Remove the excess thread from the back of the flower.

Sponge dries clear adhesive to the stamen and sprinkle with baby’s breath glitter. Hot glue into position to the side of the sentiment.

Other Products: Foam pads, white stamping card, white card, hot glue

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” white cardstock at 6” on the long side. Cut black cardstock to 5 7/8 x 5 7/8” 2x, cut white cardstock 5 3/4 x 5 3/4” 2x. Adhere one of the white cardstock squares to the black cardstock, adhere inside the card and stamp the heart shaped Elegant Rose Banner Cling Stamp and the sentiment from Just For You Sentiments Cling Stamp Set using Memento Tuxedo Black ink. Using an embossing folder, emboss the second piece of white cardstock and adhere to the black cardstock. Adhere to the card front using dimensional foam adhesive.

Stamp the Elegant Rose Banner Stamp on heavy white cardstock using Tuxedo Black ink and color using Stampin’ Blend markers Real Red and Granny Apple Green. Diecut using the coordinating outside and center Elegant Rose Banner dies and cut 5 more times from white cardstock. Adhere the layers together for dimension. Spray using Sheer Shimmer Craft spray and let dry. Stamp the sentiment on white cardstock using VersaMark ink, sprinkle with Ranger Fine Detail Black Embossing Powder, heat set using the Heat It Tool, diecut using just the outside Elegant Rose Banner Die and adhere behind the colored banner. Adhere to the card front using dries clear adhesive.

Stamp the Classic Rose Cling Stamp Set using Real Red for the flowers and Olive for the leaves, color the roses using the same ink and color the leaves using Leaf Green and Olive. Diecut using the coordinating dies and shape using the 3D Rose Shaping Mold. Create one small rose and add two layers of the smallest rose together and add a stamen in the center to create small flowers.

Adhere the small rose and a leaf to the left side of the banner and adhere three small flowers and a leaf to the right side of the banner.

Make a multiloop bow using the Bow-it-All and red sheer ribbon and adhere it under the rose banner using hot glue.

Other Products: White Cardstock, Black Cardstock, Rose Embossing Folder, VersaMark, Ranger Fine Detail Black Embossing Powder, Red Ribbon, Stampin’ Blend markers Real Red Light and Dark and Granny Apple Green Light and Dark, Stampin’ Up Ink Pad Real Red, Red Sheer Ribbon, Bow-It-All, Misti