Instructions:

Cut a piece of the flower shaping cardstock to 7 x 10", score and fold at 5". From the Festive Christmas Paper collection (sheet 12B), cut green paper to 5 x 7" size. Cut another piece of the cardstock to 4 5/16" x 6 13/16" size. Cut two pieces of clear cardstock to just slightly smaller size. Use the largest plain circle from HCD1-7155 Circle Basics Large Die, to diecut coordinating openings into white panel, green panel, 1 of clear cardstock panels and card base. Stamp the white panel with the ‘Merry Christmas’ sentiment from HCPC-31026 Christmas Lantern Cling Stamp Set. You’ll want to stamp the sentiment in Carnation Red and off onto scrap paper one time before onto the panel. Repeat this step 3 more times to create a background pattern as shown. Clean the stamp, then use the white VersaColor ink to create a shadow stamp by each of the red sentiments, then sprinkle with the Aged Ivory embossing powder and heat set. Also sponge the edges of the white panel with the same ink, sprinkle with the embossing powder and heat set. Lightly sponge the edges and top left and bottom right of circle with the Carnation Red ink. Sponge the edges of the green panel with the Leaf Green ink and attach onto card base. Attach both clear cardstock panels, one with the opening and the other with none. Then attach the white ‘Merry Christmas’ panel on top.

Using from the HCD2-7306 Decorative Circle Frames Die, diecut the decorative circle 3 times from the white cardstock. Then also diecut the same from Luxe Gold cardstock. Use the largest plain circle from HCD1-7155 Circle Basics Large Die to diecut openings from each one. Layer the white decorative circles on top of each other for thickness and then attach onto the gold circle at a slight offset so that it shows. Sponge the top left and bottom right of inner circle with Carnation Red ink. Diecut another decorative circle from clear cardstock and cut out the center circle for creating the shaker. From the HCPC-31026 Christmas Lantern Cling Stamp Set, use the lantern to stamp a pattern on the bottom right and top left edges of the clear circle. Stamp in VersaColor white, sprinkle with Aged Ivory embossing powder and heat set. Attach the clear cardstock circle onto the back of gold decorative circle. Then use thin strips of dimensional adhesive to attach around the circle to allow for the shaker elements. Attach the threaded ribbon on bottom right and top left of circle opening on the card. Sprinkle some of the Rajni’s Frosting powder and gold glass beads into the circle and then attach the decorative circles on top. Use glue to make sure it gets securely attached in place and none of the elements can escape the shaker. 

Stamp the holly and birdies from HCPC-31027 Festive Berry & Birdies Cling Stamp Set in Olive onto the cardstock. Clean the stamps and use the gold Encore ink to stamp both images onto the Luxe gold cardstock. Stamp the lantern from HCPC-31026 Christmas Lantern Cling Stamp Set in Olive onto the cardstock. Stamp the sentiment from the same set in Carnation Red onto the cardstock. Diecut the images and the sentiment with the coordinating dies.

Use the Zig makers along with the blender to color the holly and birdies images. You’ll need the Carmine Red, Light Pink, Bright Yellow, Yellow, Pale Green, Light Green, Deep Green, Dark Brown & Beige markers to color the images. After the images are colored, apply a light touch of the Crystal Lacquer and let dry. Shape the images and layer the holly and birdies onto of the coordinating gold image with hot glue. Attach onto the card as shown. Cut off two small leaf sections from the lantern and attach underneath top left and bottom right of the decorative circle. Lightly sponge bottom of sentiment with the Carnation Red and attach onto center of the circle as shown. Apply the Dries Clear glue on top left and bottom right of card and sprinkle with Frosting Powder. Add some of the Gold solar glass beads too.

Other Products: Art Institute Gold Solar Glass Beads, Gold Threaded Ribbon, Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Card Size is 4 1/2 x 6”. Cut white cardstock to 9 x 6, score at 4 1/2”. Cut blue paper from Festive Christmas Paper Collection to 4 1/4 x 5 3/4”. Place panel on open card front and diecut oval opening using the 4th largest die from the Oval Filigree Frame die set HCD2-7426, ink edges with Night Sky ink and adhere panel on card base using foam dots. Diecut 3rd largest die from same set on gold cardstock then also on white cardstock x2. Adhere the two white pieces together, use a dauber along with Vermillion ink to give a hue of red to frame, then apply Dries Clear glue onto Hydra Sponge and dab randomly onto decorative frame, sprinkle with Crystal Clear and tap off. Adhere gold frame behind this, offsetting lightly, creating a golden shadow. Adhere frame onto card base, applying glue onto top and bottom only.

Stamp the images onto white cardstock. From the Christmas Lantern Stamp set, stamp the lantern x2 using Night Sky on the lantern and English Ivy on the leaves. From the Christmas Holly Accents stamp set, stamp the holly leaves in English Ivy and the birdie x2 using Sepia and English Ivy inks. Stamp the sentiment from Christmas Holly Accents stamp set using Vermillion ink. Diecut using coordinating dies, die cut one lantern full outline, and one lantern only and also with the birdie, diecutting one full outline then the second one with just the bird.

Color images with Stack and Store Daubers along with the following color: Englishe Ivy and Vivid Chartreuse on the lantern greens, Seafarer, Golden Rod and Vermillion on the lantern and berries. Use Vivid Chartruese and Leaf Green on the holly leaves. English Ivy, Vivid Chartreuse, Sepia, Golden Rod and a light touch of Vermillion on the birdie. After coloring use Hydra Sponge to apply a soft shine onto image and allow to dry. Shape images using Deluxe Flower Shaping KIt then adhere onto card front as shown laying the lantern and birdie for more dimension. Apply Leaf Green on the stems of the red stamens and tuck into card for a special touch.

On inside of card adhere sentiment, then add a soft touch of Golden Rod to create a soft glow from behind the lantern.

Other Products: White cardstock, foam adhesive, paper trimmer, tidy tray, die cutting machine

Instructions:

Card size: 4 x 9". Make a shaped card using the outer die of the Slim Gateway (see video: How to Create Decorative Shaped Cards for All Occasions - YouTube) , also cut another front from blue decorative paper then glue it to the card base matching edges. 

Cut the decorative part of the Slim Gateway from white and from gold, glue together off-set then fold back opening in the center, both sides. 

Stamp the sentiment on white using Vermillion, die cut then pop up on a piece of white cut in a rectangle. Cut a gold mat as well.  Glue the sentiment to the center under open gate.

Stamp birds and holly using black then color, die cut. Add foam to the backs then adhere to card top and bottom. Stamp poinsettias using Vermillion, sponge with Carnation, die cut then sponge edges with Vermillion, form. Glue 2 together staggering petals then insert gold stamen. Glitter flowers then adhere to card with holly.

Other Products: White cardstock, hot glue, Copic markers: YG03, YG23, YG17, R43, R24, R39, R21, E53, E33, E35, E39YG63, YG67

Instructions:

Cut a 5.25” x 6.75” stripey paper from the collection and adhere to a 5.5” x 7” white card base. Layer 1: Cut a paper from the collection 6” x 4.75” adhere onto a slightly larger piece of white card. Die cut 2x curvy accent borders and adhere to the longest edges with the pattern facing into the centre of the paper. Adhere to the centre of the card base. Layer 2: Cut a panel from the paper collection. Die cut 2x curvy accent borders and adhere to the top and bottom of the panel, snip off excess. Adhere onto a slightly larger red paper and a slightly larger white piece of card. Add to the card base using foam pads.

Stamp onto white stamping card using black versafine clair ink: 1x lantern, 2x of each birds, 2x pine leafs, 2x holly and berry sprigs, 1x sentiment. Cover in clear embossing powder, remove excess and heat to set. Die cut all images.

Die cut a white card and paper circle, adhere the layers together and adhere the sentiment to the centre of the circle. Adhere to the card base as shown.

Colour the lantern using a mixture of inks and watercolour zig markers, shape using the flower shaping tools and adhere to the card using foam pads. Colour the greenery and using old olive ink and deep green zig and shape. Sponge over dries clear adhesive and sprinkle lightly with glitter.

Die cut the birds and decoupage on top of the first bird using hot glue.

Other Products: Cherry cobbler, old olive, real red inks - Stampin Up!, foam pads, hot glue, stamping card

Instructions:

Completed top fold card measures 5” x 7”. Cut one piece of white card stock measuring 5” x 7”, and a second piece measuring 5” x 7 1/2". Score the longer piece of card stock at 1/2" and adhere two pieces of white card stock together to create top fold card base.  Select a decorative piece of paper from the Festive Christmas Paper Collection. Cut a mat measuring just slightly smaller than the card front. Adhere mat to card base.

Next, cut a coordinating decorative piece of paper from the paper collection measuring 4” x 6”. Using the larger circle from the Circle Basics Large Die, die cut a circle in the center of the decorative paper. Continue matting by adhering the decorative paper with die cut center onto a piece of slightly larger white card stock, and again onto a slightly larger piece of Gold Luxe Card Stock. 

Using Memento Danube Blue ink, stamp sentiment from Berry and Birdies Cling Stamp Set using acrylic block or MISTI into center of layered mat just assembled. Apply dimensional foam tape to back and set aside. 

Next, using white card stock, create the decorative die cut embellishment piece from the Decorative Circle Frames Die using the decorative insert and the largest circle in the same set, creating a frame for around the sentiment. Repeat a second time using Luxe Gold Card Stock. Using Dries Clear Adhesive, adhere the two decorative die cuts together, offsetting them slightly so the gold peeks through from behind the white die cut. Adhere the decorative die cut frame to the matted panel, and now apply to card front. 

Stamp one inking of large bird image from the Festive Berry and Birdies Cling Stamp Set onto Bristol smooth marker paper using Ranger Archival Jet Black ink. Color using Zig markers, and die cut with coordinating die. 

Stamp four of the holly images from the Christmas Holly Accents Cling Stamp Set onto Deluxe Flower Shaping Paper using Ranger Archival Ink Olive. Color using Stack and Store Daubers and a combination of Ranger Archival Ink Leaf Green and a hint of the darker Olive color the images have been stamped in. Die cut using coordinating die. Shape using Deluxe Flower Shaping Kit and set aside.

Stamp five of the slender leafy accents from the Christmas Holly Accents Cling Stamp Set onto Deluxe Flower Shaping Paper using Ranger Archival Ink Leaf Green. Color using Stack and Store Daubers and the same color they have been stamped in. Die cut with coordinating die. Shape using Deluxe Flower Shaping Kit and set aside. 

Next, stamp the two smaller petal sizes from the Christmas Poinsettia and Holly Cling Stamp Set onto Deluxe Flower Shaping Paper using Ranger Archival Ink Carnation Red. Also stamp one inking of the larger holly leaves from the set using Ranger Archival Ink English Ivy. Color center of poinsettias with Stack and Store Daubers and Ranger Archival Sunflower, then finish petals and leaves using the same colors each of the images have been stamped in. Die cut using coordinating dies, ink the edges of the petals and leaves in corresponding colors, and shape using 3D Christmas Poinsettia Shaping Mold. Finish rounding out flower centers slightly with Deluxe Flower Kit. 

To begin building floral clusters as shown, adhere two holly leaves angled beside one another onto top left corner and bottom right corner, making sure to pay attention to how they will fall into and accent the sentiment in the center of the card. Next, adhere three of the slender leafy accents to the bottom cluster coming out from behind both of the ends of the holly images and one in the bottom corner pointing away from the sentiment. Adhere the remaining two slender leafy accents to the top cluster, one facing the top of card, and one coming down toward the sentiment as shown. 

Next, double up some dimensional foam tape and adhere bird image to bottom cluster. To complete the bottom cluster, create a small double poinsettia from the smallest poinsettia petals that have been shaped. Position on bird image as shown, along with a large holly leaf beside the flower to determine placement. Once happy with placement, adhere to floral cluster. 

To finish top floral cluster, assemble a small double poinsettia and a larger double poinsettia. Position into cluster as shown adding in two of the Christmas Poinsettia holly leaves. Adhere to foliage cluster. 

Lastly, finish poinsettia flower centers by applying Heart of Gold Prills with Dries Clear Adhesive. Using a piece of Hydra Sponge, apply a thin layer of Dries Clear Adhesive to flowers and foliage and sprinkle with Crystal Ultrafine Transparent Glitter. 

Other Products: Scoring board, bone folder, MISTI stamping tool, acrylic stamp blocks, white Bristol Smooth marker paper, die cutting machine, funnel tray, dimensional foam tape, scissors, paper trimmer

Instructions:

Card size 5” x 7” (final size, side fold card). Take pattern paper from HCDP1-2152 Festive Christmas paper Collection, tear edges and adhere using designer dries clear adhesive.

Take white cardstock and cut edge die using HCD3-7435 Curvy Accents Border Die on right side. From same die set cut one die on white cardstock and place it little behind the curve die, as shown. Randomly add crystal clear glitter.

Next layer of dies from HCD2-7426 Oval Filigree Frame Die on white cardstock and luxe gold cardstock, adhere them using foam tape.

Stamp images from HCPC-31026 Christmas Lantern Cling Stamp Set, HCPC-31027 Festive Berry & Birdies Cling Stamp Set, HCPC-31028 Christmas Holly Accents Cling Stamp Set, on white cardstock using archival ink-jet black and cut them with coordinating dies. Color them using Zig markers and archival ink-english ivy, vermillion, carnation red. Add Crystal Clear Glitter randomly. Adhere them using foam tape and glue gun.

Add sentiment from HCPC-31026 Christmas Lantern Cling Stamp on white cardstock using archival ink-mulberry and english ivy and cut it with coordinating die and adhere it using designer dries clear adhesive as shown.

Other Products: Big Shot Machine, Glue Gun.

Instructions:

The ready side fold card measures 5 1/2” by 8”. Cut a decorative gate in white using Teardrop Lattice Gateway Die. Create a panel from the pattern paper collection 1/4” smaller on all four sides. Glue a golden die-cut, behind the white one to create little shadows, and layer the gate on the card front using glue dots. 

Next, stamp the ornate window using HCPC-31016 Ornate Window Cling Stamp Set with Coffee Brown Archival ink and cut it using its coordinating die set. Also, stamp the image again and this time cut only the window ornate head. Color the images using Stormy Sky and Brushed Corduroy and layer them together. 

Next, stamp all the required images from  HCPC-31026 Christmas Lantern Cling Stamp Set, HCPC-31027 Festive Berry & Birdies Cling Stamp Set, and HCPC-31028 Christmas Holly Accents Cling Stamp Set, with black archival ink on smooth white cardstock and paint them using Zig Clean Clear Markers. Once done with the painting, cut the images using their coordinating dies. Glue an extra die cut on the back of the painted image for extra strength. 

Use Clematis stamp and die set to create small Poinsettias. Stamp the Clematis florals using Versamark ink on Rjni Chawla's Vellum Flowret cardstock and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set it using a heat tool. Cut the florals using the coordinating die set and color the flowers using Festive Berries Distress Oxide and shape them using shaping tools. 

Once ready with all the elements, layer and glue all the painted images as shown and finish the card by adding a stamped, die-cut sentiment from the same collection.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Heat gun and Festive Berries Distress Oxide

Instructions:

Cut out the white card base and fold it down to 4 1/4" x 8 1/4". Cut out a slightly smaller rectangle from the collection of papers and glue it to the base. Then cut a 3 3/4" x 7 3/4" rectangle from the white paper and glue it to the card. Cut out a slightly smaller rectangle from the paper from the collection and glue it. Then cut a 3 1/4" x 7 1/4" rectangle out of white paper and glue it to the card. Cut out a slightly smaller rectangle from the paper from the collection and glue it.

Cut a smaller gold frame from the Slim Elegant Rectangle die set. Then cut out a slightly smaller frame from the white paper. Using the slot die from the Regal Lattice Gateway Die kit, diagonally cut the white piece as shown. Glue with Double Dots 100pcs. - 3D foam wheels.

Emboss elements from the Festive Berry & Birdies Cling Stamp Set and lsentiment from the same set onto white paper using gold embossing powder. Melt the powder with the embossing heater. Color with watercolor markers. Cut with the coordinating dies.
Cut out the same elements from the gold paper and glue them so that they protrude a little from the bottom.

Cut out the sentiment in the rectangle and glue it with a rectangular card from the collection. Glue as shown.

Other Products: Watercolor markers, die cutting machine, gold paper

Instructions:

Fold white cardstock to 5 x 7.5" with fold on the top then use die No. 1 from the Simply Classic Oval Frame Die Set to cut leaving the top of the die over-hanging fold by about 1/4". Cut a panel for a front with the die No. 1 from the same set and Festive Christmas Paper Collection, adhere it to the base. Cut out a white and a gold frame with die No. 2 and 3 from the same set and a green oval with die No. 3 and Festive Christmas Paper Collection. Cut out a white and a gold gate with Palace Gateway Die Set. Stamp a sentiment in Red Geranium ink using Christmas Holly Accents Cling Stamp Set and cut it out with coordinating die. Stamp a lantern in Tuxedo Black ink using Christmas Lantern Cling Stamp Set, color it and cut out with coordinating die. Adhere all elements as pictured.

Stamp flowers from the Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping Paper. Color them with Lady Bug ink, diecut with coordinating dies and shape with mold. Add Rock Candy Small Stamens to all flowers. 

Stamp berries from the Christmas Lantern Cling Stamp Set, bird from the Festive Berry & Birdies Cling Stamp Set, birds and holly branches from the Christmas Holly Accents Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp pine branches from the Christmas Holly Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. 

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches, add Assorted Bead Medium Stamens and some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, pearls, colored pencils, sisal

Instructions:

Cut a piece of white cardstock to 11 x 5.5", score at 5.5" and fold to get a square base. Cut a piece of red paper from the Festive Christmas Paper Collection to 5 5/16 x 5 5/16" and green one to 5 1/8 x 5 1/8". Cut out a gold and a white frame with die No. 2 and 3 from Rectangle Filigree Frame Die Set. Cut out a gold and a white decor with die from Filigree Border & Accents Die Set. Adhere them to the base as pictured. Stamp a sentiment in Red Geranium ink using Christmas Holly Accents Cling Stamp Set and cut it out with coordinating die. Repeat it on the gold cardstock. 

Stamp flowers from the Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping Paper. Color them with Lady Bug ink, diecut with coordinating dies and shape with mold. Add Rock Candy Small Stamens to all flowers. 

Stamp berries from the Christmas Lantern Cling Stamp Set, birds from the Festive Berry & Birdies Cling Stamp Set and holly branches from the Christmas Holly Accents Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp pine branches from the Christmas Holly Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink and cut out with coordinating die. 

Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches, add Assorted Bead Medium Stamens and some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, pearls, colored pencils, sisal

Instructions:

Cut a piece of white card stock measuring 8 x 10” and score at 4” to create a side folding card base. Using the largest die from the HCD3-7431 Slim Eyelet Rectangle die set cut through both layers of the card base making sure that the left side of the die hangs over the left side just barely to preserve the fold line. This will form a shaped card base. Now cut a piece of white card stock with the same die and glue straight on top of the card base to give that fold line side a finished look. Next using the HCDP1-2152 Festive Christmas Paper Collection use sheet 9B (red) to cut 1x with the same exact die and adhere to the card front. From the same paper pack cut sheet 6B (Dark Green) 2x using the largest die from the HCD3-7432 Slim Basic Rectangles Die Set (one piece will be set aside for the inside of the card). Now use the 2nd largest die to cut a piece from sheet 4B (Light green). Also from this paper cut another piece for the inside using the 5th largest die and sit it aside for later use. Adhere the dark green piece to the card front. Now cut the HCD3-7433 Slim Lattice Die Set 2x, once in white card stock and once in Luxe Gold card stock. Adhere these together using Dries Clear adhesive with the metal tip so that the white card stock is slightly offset and the gold is peeking out from behind the white. Now adhere that layer to the Light green layer previously cut and attach to the card front with 3D foam tape.

Now stamp out the two lower birdie images in Archival Black ink onto Deluxe Flower Shaping Paper from the HCPC-31027 Festive Berry & Birdies Cling Stamp Set and a second from the HCPC-31028 Christmas Holly Accents Cling Stamp Set as your focal images as shown. From the Festive Berry & Birdies Cling Stamp Set, also stamp the top image out 2x in Emerald Green Archival ink. Die cut out using the coordinating dies. With the two branch stamps stamped in green, trim off the birdies and discard the birds. Now using color pencils color in all of the images. Shape from the back side gently using the Deluxe Flower Shaping Kit. 

Next stamp out 16 small poinsettias (the stamp 2x) from the HCPC-3822 Poinsettia & Holly Clusters Cling Stamp Set in Red Geranium Archival ink onto Deluxe Flower Shaping Paper. Color with the same. Die cut with the coordinating dies then using Stack and Store Daubers darken the edges of each petal. Glaze each flower using 3D Crystal Lacquer with a paint brush. Allow to dry. Then shape using the Deluxe Flower Shaping Mold and glue Gold Micro Beads to the centers. Do this exact same process with the focal poinsettia only using the HCPC-3881 Christmas Poinsettia and Holly Cling Stamp Set. 

Begin arranging all the items on the card front using a combination of Hot Glue and 3D foam dots to give extra dimension. Using the sentiment from the HCPC-31028 Christmas Holly Accents Cling Stamp Set, stamp out the sentiment in Red Geranium and die cut with the coordinating die. Use adhesive foam strips to adhere this to the card. To finish off the inside of the card adhere the dark green and light green papers, previously set aside, on the inside of your card for a coordinating look. 

Other Products: Paint Brush, 3D Foam Dots, 3D Foam Tape, Gold Micro Beads, Color Pencils, Hot Glue Gum, Glue Sticks, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 5.5 x 6.5 inch piece of light teal paper from the Festive Christmas Paper Collection, and adhere.

Cut out two of the corner dies from the Filigree Border and Accents Die in white cardstock, adhere to each top corner.

Stamp two of the window from the Ornate Window Cling Stamp Set in Jet Black, sponge with French UItramarine and Pebble Beach, cut out with coordinating dies and layer with foam tape, add Frosting Powder, adhere window as pictured.

Stamp one of the three bird stamps in the Festive Berry & Birdies Cling Stamp Set in Jet Black, sponge with Paradise Teal, Lady Bug, Vivid Chartreuse and Coastal Coral, cut out with coordinating dies, sculpt with stylus and add Frosting Powder. Attach near the top of the window with foam tape.

Stamp the lantern from the Christmas Lantern Cling Stamp Set twice in Jet Black, sponge with Pebble Beach, Sunflower, Vivid Chartreuse, Lady Bug and Iris, cut out with coordinating dies, and adhere the lanterns together for more dimension with foam tape, add Frosting Powder and adhere to the left side of the window with foam tape.

Stamp the sentiment from the Christmas Lantern Cling Stamp Set in Jet Black on white cardstock and cut out with the coordinating die, cut out several additional die cuts to adhere and add dimension. Adhere to the right side of the window.

Stamp the holly and sprig in Jet Black, sponge with Vivid Chartreuse and Lady Bug,  and cut out with coordinating dies, add Frosting Powder.

Stamp the poinsettias from the Large and Small Festive Poinsettia Cling Stamp Set in Lady Bug, sponge with same, cut out with coordinating dies and sculpt with the Large and Small Poinsettia Shaping Mold, add stamens and Frosting Powder.  

Adhere poinsettias, sprigs and holly as shown.

Other Products: White cardstock

Instructions:

Create a top fold card from a smooth white card stock measuring 5 1/2” x 7 1/2”. Choose the designer paper from Festive Christmas Paper Collection and cut to size measuring 5” x 7”. Next, mat this paper on Luxe Gold Card stock measuring 5 1/4” x 7 1/4”. Mat this ready panel on white card base using foam tape.

Cut all the required die cuts from Simply Classic Oval Frame Die from the Luxe Gold card-stock and white card-stock. Stack both die cuts together slightly offset. Adhere it on the card  base using foam tape.

Choose and stamp the images from Christmas Holly Accents Cling Stamp Set on a smooth watercolour paper using Versafine pigment ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies.

For the flowers, stamp flower images from Christmas Poinsettia & Holly Cling Stamp Set on the Deluxe flower shaping paper using Carnation Red archival ink. Color them using same ink. Stamp the leaves from same stamp set on Deluxe Flower Shaping paper with Olive Archival  ink and color them using Leaf Green and Olive Archival ink. Cut the flowers and leaves using their coordinating dies and shape them using coordinating 3D shaping mold. Now add Go ManGo prills to the centre of flowers.

Once all the elements are ready assemble the card as shown. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Versafine pigment ink, foam tape.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of blue pattern paper 4 7/8” x 6 7/8” and adhere to the front of the silver card. Cut a piece of silver cardstock 4 5/8” x 6 5/8” and adhere to the blue paper. Cut a piece of light blue paper 4 1/2” x 6 1/2” and adhere to the front of the silver card.

Die cut three decorative frames using the Nos. 3, 4 and 5 dies from the HCD2-7381 Fancy Classic Oval Frame Die out of Deluxe Flower Shaping Paper. Stack the three dies together, add Frosting Powder with Dries Clear on a sponge and adhere to the card front. Take one of the discarded ovals and blend the blue and yellow background using Buttercream, Citrus Burst, Fresh Lemmon, Sky Blue, and Summer Shower inks. Die cut the decorative oval using the Nos. 4 and 5 dies out of Deluxe Flower Shaping Paper.  Add Frosting Powder to the decorative die with Dries Clear glue on a sponge and adhere over the ink blended oval and then adhere to the centre of the frame.

Stamp two lantern images from the HCPC-31026 Christmas Lantern Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Clean Brush Markers and die cut one complete image and one lantern only. Adhere the lantern over the background image. Die cut another plain image from Deluxe Flower Shaping Paper and adhere the painted image to this and then adhere to the base of the oval. Add Red Berry Nuvo Drops to the holly berries.

Stamp the bird and leaves image from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Die cut another plain die from Deluxe Flower Shaping Paper and adhere the painted image to this and then adhere to the top of the lantern with some foam squares.

Stamp the sentiment from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Obsidian ink on Deluxe Flower Shaping Paper and die cut with the coordinating die.  Die cut another plain die and adhere the stamped image on top before adhering the sentiment to the base of the lantern as shown.

Other Products: Iris cardstock, Altenew inks - Buttercream, Fresh Lemon, Citrus Burst, Pink, Obsidian Pigment Ink, Fresh Studio inks - Summer Shower, Sky Blue, Nuvo Crystal Drops - Red Berry

Instructions:

Die cut three large decorative edge dies from the HCD2-7261 Booklet Frame dies - two from Deluxe Flower Shaping Paper and one from silver cardstock. Adhere the silver frame behind the white frame slightly offset them so show a hint of silver. Score at 1” along the short side of the remaining booklet die and then adhere the silver and white frame to the top of the scored die to create a hinged shaped card. Using the No. 2 die from the HCD1-7260 Booklet Basics Die cut a piece of pattern paper and adhere to the booklet front. Die cut a silver ‘page’ using the No.3 die from the Booklet Basics die, score down the centre, shape and adhere to the front of the booklet card using pop dots.  Die cut a piece of pattern paper using the No. 4 die from the Booklet Basics die, score down the centre, shape and adhere to the front of the card using foam squares. Die cut the bookmark out of silver cardstock and adhere to the centre of the card as shown.

Stamp the large flourish from the HCPC3959 Holly Berry Spray Cling Stamp set in English Ivy ink on Deluxe Flower Shaping Paper. Colour the image with Leaf Green ink and die cut with the coordinating die. Stamp the leaf images from the same stamp set in Versamark on silver cardstock and heat emboss with silver embossing powder. Die cut with the coordinating die and adhere the leaves and spray to the right side of the booklet. Stamp the poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp Set and the HCPC-3958 Small Festive Poinsettia Cling Stamp Set in Vermillion ink. Colour the images with Vermillion ink and die cut with the coordinating dies. Colour the backs of the flowers with Vermilion ink and the edges with Leaf Green ink and shape using the coordinating molds. Pierce the centres of the flowers and assemble by inserting yellow beaded wire stamens through the centres and fastening with a hot glue gun. Trim the wires and adhere the flowers to the leaves using a hot glue gun. Stamp the leaf filler image from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green ink and die cut with the coordinating die. Trim and adhere around the other leaves and flowers.

Stamp the Christmas sentiment from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in Versamark ink on Deluxe Flower Shaping Paper and heat emboss with silver embossing powder. Die cut with the coordinating die and adhere to the left ‘page’ of the booklet as shown.

Stamp the bird and leaves images from the HCPC-31027 Festive Berry & Birdies Cling Stamp Set in Momento Tuxedo Black ink on Neenah 80Lb cardstock. Colour the images with alcohol markers and die cut with the coordinating dies. Die cut another set of plain dies from Deluxe Flower Shaping Paper and adhere the coloured images to them and adhere to the top right and bottom left of the booklet card.

To finish, add Crystal Clear glitter to the flowers and leaves using clear gloss gel medium on a paintbrush.

Other Products: Copic markers - G28, Y17, BG23, RV29, R46, RO2, B23, B05, B02, Clear gloss gel medium, paintbrush, Neenah 80Lb cardstock, Versamark ink, Ranger Silver Embossing Powder, hot glue gun

Instructions:

My finished card size is 4" x 9". I used the Deluxe Flower Shaping Paper to make the base as it is a perfect weight for anything you want to add to it. Dilute some of the Designer Dries Clear Adhesive with water and paint with a brush onto the paper then dust with the glitter. Allow this to dry.  

Cut two of the Slim Stars Lattice Rectangle Die, once with white cardstock and once using the Luxe Silver Cardstock. Offset the silver behind the white and glue together. Glue to the card front.  

Stamp the Latern and the little bird onto watercolor paper using Memento London Fog ink.  Using the water brush and Distress ink and the Zig markers color the image and set aside to dry. Once dry add some glue and then sprinkle with glitter. Allow this to dry. Die cut with coordinating dies and set aside. Decide on placement and adhere with dimensional tape.  

Stamp the sentiment with Distress ink and cut out with coordinating dies. Layer this onto the Luxe Silver cardstock and then adhere to card front with dimensional tape. I just cut a piece of silver cardstock a bit larger than the sentiment and eye balled where to cut to make it a banner.

Cut a length of white seam binding and color with the Distress ink, scrunch and set aside to dry.  Once dry tie a bow and glue to the top of the latern.  

Other Products: Die Cut Machine, Dimensional Tape, White Seam Binding, London Fog Memento Ink, Festive Berries and Scattered Straw Distress Ink, Canson Watercolor Paper, White Cardstock

Instructions:

For the card base use Deluxe Flower Shaping paper. Its a ready folded card measuring 9" by 6", cut panel on cream card stock measuring 8 3/4 by 5 3/4" and adhere it on the card base using dimensional tape. Cut another panel from Designer Paper Collection measuring 8 1/2 by 5 1/2", adhere this panel on the last panel using clear glue. 

Apply texture paste on the card as shown using stencil. Add some mold made elements on the background using hot glue.

Stamp the image of window on the desinger paper using coffee ink, die cut the images using coordinating die and color with zig markers, add extra layer underneath for the sturdiness and add on the card base using foam dots.

Stamp the images from collection with leaf green and coffee inks, die cut the images using coordinating dies, color the images with zig markers and leaf green ink, shape a little from back side and cover with Magic Glitter.

Stamp the small flower of poinsettia from the Large Poinsettia stamp set and some Holly Accents from the collection using Versamark embossing ink on the brown card cover with sea breez embossing powder heat it using heathing tool, die cut using coordinating dies, shape the flowers in the mold, and make 4 flowers, add pearls inside the flowers using hot glue, add clear glue on the sides of the beads and sprinkle some mini prills.

Arrange all ready elements as shown using hot glue, embellish the card with Rhinestones, decorative beads and Nuvo Drops.

Other Products: Pearls, Nida Tanweer Magic Glitter Powder, Paper Magik Decorative Beads, Rhinestones, Cream cardstock, Brown Cardstock, Hot Glue, Dimensional tape, Versamark Ink, Mould made elements, Sea breeze Embossing Powder, Stencil.

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create card base. Cut Luxe Silver cardstock 2x at 4 7/8 x 6 7/8” and sheet 5B from the Festive Christmas Paper Collection 2x at 4 3/4 x 6 3/4”. Ink the edges of the designer papers with Archival Sky Blue ink. Adhere one Luxe Silver piece and one designer paper to the card front using removable tape. Using the plain oval from the Fancy Classic Oval Frame Die, cut an aperture in the card front. It will usually only cut through two of the layers but will leave a deep impression on the cardstock so you can remove the two mat layers, lay the die on the impression on the card base and run through the diecutting machine one more time. You will wind up with perfectly aligned layers to adhere permanently with dries clear adhesive. Adhere the second set of mat layers to the inside of the card. Using the third and fourth largest Fancy Classic Oval Frame Dies, cut from white cardstock and Luxe Silver cardstock. Adhere together slightly offset and adhere to the card front using dimensional dots.

Stamp the images from the Christmas Holly Accents Cling Stamp Set on watercolor paper using Archival Olive, Jet Black and Vermillion inks, Color using Zig Clean Color Real Brush markers - Pale Green, Light Green, Carmine Red, Wine Red, Cornflower Blue, Yellow and Ochre and a water brush. Stamp the images with the birds two times, once in Olive and once in Jet Black. Color the leaves on the one stamped in Olive and color the birds on the one stamped in Jet Black. Diecut all images using the coordinating dies, diecut the images a second time from white cardstock one more time and adhere to the back of the stamped images. Diecut the birds four more times and adhere for dimension. Lightly shape the images using the Deluxe Flower Shaping kit and spritz with Sheer Shimmer Craft Spray – Sparkle. Adhere the images to the frame and the inside of the card as pictured using dimensional dots and hot glue.

Add some extra sparkle by randomly dabbing the images, the frame, the card front and the inside with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent glitter.

Other Products: White Cardstock, Diecutting Machine, Misti, Hot Glue Gun, Dimensional Dots, Removable Tape Runner, Strathmore Bristol Vellum Cardstock

Instructions:

Prepare a card base by folding a 6 x 6" piece of white card stock in half. Place the largest die from the Simple Centerpiece set on it, letting it hang over slightly and run through the die cut machine. This will make the card base for the card. Cut another one out of the white and adhere to the base. Cut one more out of the Festive Christmas paper sheet 9B and adhere to the card.

Cut 2 of the Elegant Hearts Centerpiece out of one white and one Silver. Adhere the 2 together off setting so the Silver will shine through, adhere to the card. Use the 2nd die from the Elegant Hearts Centerpiece and cut the center out of sheet 1A. Add foam dots to the back and adhere to the card. 

Stamp 2 of the Festive Berry and Birdies on white with the Northern Pine ink, color with Prisma Color pencils. Cut out with the coordinating die. On the second one, cut out the birds only. Place tiny foam dots on the back and adhere to the top of the card. Place tiny foam dots to the back of the birds and add to the top of the birds as shown.

Stamp one of the Christmas Holly Accents (bird) and 3 of the leaves on white with the Northern Pine ink.  Color with the pencils, cut out with the coordinating die. Adhere to the lower right hand side of the card.

Stamp the Poinsettia & Holly Clusters on white with black ink, color with the pencils. Cut out with the coordinating die. Place in the matching mold and run through the die cut machine to shape. Put 2 together making one flower. Adhere to the card putting one of the leaves under it.

To finish add glitter to the birds, leaves and flowers. Add Crystal Drops to the Berries and flowers.

Other Products: Paper trimmer, die cut machine, tiny foam dots, Nuvo Red Berry crystal drops, Prisma Color pencils,

Instructions:

The finished card measures 6 1/2 x 5". Take a 10 x 6 1/2" white base and fold it in half to make a top fold card. Cut a 6 1/8 x 4 5/8 piece of pattern paper in the paper #2B from the Festive Christmas collection. Cut a 5 7/16 x 4 1/2 piece of paper from the Deluxe shaping paper. Cut a 5 1/2 x 4 piece of pattern paper in the paper #1A from the Festive Christmas collection. In the paper #1A cut a 3 inches circle with the Circle eyelet kit. Glue all of them on each other on the card base with 3D foam.

Stamp your poinsettia flowers with vermillion ink onto white flower shaping paper, color the center and shade the edge with the same color. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add prills (Minnie Pearl) and arctic flakes on the edge of the flowers. 

Stamp your festive birds in archival library green ink on a watercolor paper. Color with the Zig markers. Die cut with the coordinating die. Put 3D lacquer on the birds. Do the same thing with leaves from Christmas holly accent and Christmas lantern.

Arrange your flowers and leaves on the left corner of your card. Add your birds next to it. Stamp in library green sentiment from the Christmas lantern sentiments. Glue it under at the right. Add artic flakes on your card and floral accent in your bouquet.

Other Products: Water mister, hot glue gun, die cutting machine, scissors, ruler, archival ink library green, arctic flakes, floral accent, watercolor paper

Instructions:

Die cut the Courtyard Elegance inner two square pieces, from the Courtyard Elegance Die Set,  in white card. Adhere to a 6" square card blank. Cut a 5 inch square of dark blue paper from the Festive Christmas Collection Paper Pad. Adhere to card front. Die cut a Slim Gateway Rectangle Die, from the Slim Gateway Rectangle Die Set, in white card, cut the two centre pieces apart, adhere the two matching pieces to centre of card.

Stamp in Memento Danube Blue ink, onto white card, the Christmas Lantern from the Christmas Lantern Cling Stamp Set, three times. Stamp on top of the blue ink with a Versamark Embossing ink pad. Sprinkle on clear embossing powder, heat with a heat tool. Color with Zig Clean Color Real Brush Pens in 035 Deep Blue, 067 Mustard and 050 Yellow, 044 Deep Green, 024 Wine Red, using a Color in Watercolor Brush. Adhere the Lanterns together with foam tape. Adhere to front of card with foam tape. 

Stamp in Memento Danube Blue ink, onto white card, all the Birdies from the Festive Berry & Birdies Cling Stamp Set. Stamp on top of the blue ink with a Versamark Embossing ink pad. Sprinkle on clear embossing powder, heat with a heat tool. Color with Zig Clean Color Real Brush Pens in 035 Deep Blue, 050 Yellow, 044 Deep Green, 024 Wine Red and 065 Mid Brown, using a Color in Watercolor Brush. Adhere to front of card with mini foam pads and Dries Clear Adhesive.

Stamp in Memento Danube Blue ink, onto white card, the Sentiment from the Christmas Lantern Cling Stamp Set. Stamp on top of the blue ink with a Versamark Embossing ink pad. Sprinkle on clear embossing powder, heat with a heat tool. Die cut with the matching die. Adhere onto a piece of dark blue paper from the paper pad, cut to 2 3/4" x 1 1/4". Adhere to card front.

Sponge Dries Clear Adhesive over the card, add clear glitter. All done.

Other Products: 6" square card blank, die cutting machine, Versamark embossing ink pad, clear embossing powder, heat tool, foam tape, mini foam pads, clear glitter.