Instructions:

Card Size is 4 1/2x 6”. Cut white cardstock to 9 x 6”. Score and fold at 4 1/2”. Cut pink paper from Feathery Florals paper collection to 4 5/16 x 5 13/16”, adhere onto card base. Cut patterned paper from paper collection to 4 3/16 x 5 11/16”, ink edges with Magenta Hue ink along with a Stack and Store dauber, then adhere onto card base using foam adhesive.

Use white cardstock to cut second largest decorative oval from HCD2-7426 Oval Filigree Frame Die. Diecut a second oval, this time adding the third largest decorative oval, this will create a frame. Apply Dries Clear glue onto a hydra sponge and dab randomly only oval frame, then sprinkle with Rajni Chawla’s Crystal Lacquer for a sparkly effect. Adhere frame onto first oval with foam adhesive, then onto card base using same adhesive.

Stamp large decorative Feathery Florals x2 onto white cardstock using Olive and Leaf Green inks on the foliage and Magenta Hue and Rose Madder onto the florals. On the second image cut the two main florals with a scissors for layering. Stamp two smallest feathers from HCPC-31019 Feathery Florals using Gold ink and emboss with Gold embossing powder, heat set. Stamp butterfly from HCPC- Feathery Florals stamp set using Magenta Hue and Majestic Violet ink onto white cardstock. 

Diecut images with coordinating dies, then diecut an additional of each of the feathers and butterfly from Luxe Gold cardstock. Use Stack and Store daubers to color images. Color feathers with Sunflower and Magenta Hue ink. Color butterfly with Sunflower, Magenta Hue and the top edge with Majestic Violet. Color the large decorative Feathery Florals with Vivid Chartreuse and Leaf Green on the foliage and Sunflower and Rose Madder on the flowers, don’t forget to color the previously cut flowers for layering. Apply Crystal Lacquer on scrap paper, then use Hydra Sponge to lightly apply Crystal Lacquer onto florals and leaves to create a beautiful sheen. Once dry, shape using the Deluxe Flower Shaping Kit stylus. Use crafting scissors to make some cuts between the petals for a better shaping ability. Pierce center of individual flowers and insert stamens, then adhere onto florals using foam adhesive for that dimension.

Adhere stamped feather onto coordinating gold feather, slightly offsetting it for that golden shadow affect. Repeat this for the butterfly as well. Shape these by wrapping around the handle of the stylus for a soft shape. Stamp sentiment on a 3/8” strip using Magenta Hue and Majestic Violet ink. Use paper trimmer to trim as desired, ink edges of sentiment with Magenta Hue ink, and shape lightly by wrapping around stylus handle. Adhere images on card front as shown using Dries Clear glue and foam adhesive. Finally, apply Dries Clear glue onto butterfly, sprinkle with Crystal Clear.

Other Products: White Cardstock, Foam adhesive, paper trimmer, scissors, Tidy Tray

Instructions:

Card size:  3 7/8 X 8 3/4”. Cut shaped card using the outer die of the Slim Eyelet Heart Rectangle Die, (see video). Cut 2 coordinating panels from decorative paper using the same die. Glue 1 to the inside. Using the Curvy Decorative Border die cut a curved border on the front side of card.  Cut the second decorative paper panel with the same plain edge curvy die as was used for the card front. Glue decorative paper panel to front of card. Cut a decorative curvy border from white cardstock then glue it to the card front.

Stamp feathers using Rose Madder, die cut and color. Stamp sentiment using Rose Madder and Electric Green, sponge Electric Green images with Pink Peony.

Stamp Lilies using Rose Madder, sponge with Pink Peony and some with Rose Madder. Die cut, shape in mold, insert yellow Petite Pollen Stamen.

Stamp leaves using Fern Green, sponge with Leaf Green, die cut and shape in mold.

Stamp vase using black on decorative paper and stamp butterfly using black, on white cardstock, die cut and color. Cut the decorative die from Vases from white.

Add pop ups to the back of vase, parts of feathers and butterfly wings. Add greenery and feathers to vase then glue/pop up vase and filler. Glue decorative white vase decoration to vase.

Use hot glue to add lilies to arrangement, insert leaves here and there.Glue butterfly to top left of card above arrangement. Add glitter to flowers and butterfly wings.

Other Products: White cardstock, Hot Glue, Copic Markers: R22, R21, R20, E70, E71, E72, Y15, YG11, YG03, YG23, Electric Green ink, Metallic white dimensional Pearl

Instructions:

Cut a 10” x 4” piece of white card, score at 2.5” and 5” to create an easel card base. Place the largest decorative oval filigree frame to the edge of the base of the card and die cut to shape the edge, trim any stray die cut edges, sponge over with dries clear adhesive and sprinkle with transparent glitter.

Die cut the smallest oval and add to the front of the card base with foam pads to form a stopper. Die cut the largest and smallest filigree frame using white card, sponge with adhesive and sprinkle with clear glitter. Die cut the largest oval using paper selected from the collection, edge with teal zeal ink. Adhere to the largest decorative oval and adhere to the front of the easel, cutting away any excess to neaten along the bottom of the diecut.

Die cut the smallest plain oval using paper from the collection, stamp the sentiment in black ink and edge with teal zeal ink. Adhere to the small decorative frame and adhere to the card base as shown using foam pads.

Stamp 2 of each of the feathery florals onto flower shaping paper using bamboo leaves ink, use daubers to colour with bamboo leaves ink, then die cut.  Colour the flowers using pink peony archival ink and use a little vibrant fuchia ink to the edges. Edge the greenery with olive grove ink and shape using the flower shaping tools.

Adhere the large feathery floral to the front of the card base and the small feathery floral to the stopper on the  base using hot glue.

Cut the florals away from the remaining feathery florals and shape lightly with flower shaping tools. Add to the card base as shown. Use dries clear glue in the centre of each flower and cover with heart of gold prills to finish the flowers

Other Products: foam pads, hot glue, white card, die cutting machine

Instructions:

Cut out a 4" x 9" card base, then cut a slightly smaller rectangle from your paper collection and glue it to the base. From white paper and from the paper collection, alternately cut out all the pieces from the Slim Eyelet Heart Rectangle Die set as shown. Glue with Double Dots 100pc. -3D Foam Circles.

On the white paper, stamp the images from the Feathery Florals set with black ink. Then color with inks: Memento Lady Bug and Memento New Sprout. Cut with a matching die. Shape with the Deluxe Flower Shaping Kit. Add glue and yellow Prills to the center of the flowers.

Glue everything as spictured. Cover with glue and glitter.

Other Products: Die cutting machine

Instructions:

Make a card base using Deluxe flower shaping paper. Cut paper to size 8" x  8 3/4" and score at 4 inches on the shorter side. Fold to make a slim line card base. Cut a piece of luxe gold card stock 3 3/4" x 8 1/2" and adhere on the card front. Cut a piece of pattern paper from the paper collection a little smaller than the gold mat layer and adhere to the card front. 

Cut two pieces of die cuts  from white cardstock using the Slim Eyelet heart rectangle die and adhere the two die cuts together. Adhere the whole piece on the Card front using foam dots. Use the same die to cut two pieces of gold die cuts using the bigger and smaller eyelet inner dies. Add mat layer on these from the paper collection.

Adhere the bigger eyelet rectangle die cut in the centre of the card and add the smaller eyelet rectangle piece a little towards the right. Cut a circle frame gold die cut. Add pattern paper at the back and adhere the pieces on the left part of the card. 

Stamp the Petite Feathers in Jet black ink on deluxe flower shaping paper. Colour with Zig  markers and cut with matching die. Add the images on the card.

Stamp the flowers from the rustic sunflower stamp set in cactus flower on Deluxe flower shaping paper. Colour the flowers using Archival inks Cactus flower, Sunflower and Plum using sponge dauber. Cut using matching die. Shape the flowers in the flower shaping mold for sunflower. Emboss the flowers with the Deluxe flower shaping tool kit. Layer the flowers together. Cup them and add the mix of two prills using designer dries clear glue.

Make leaves from the leafy Accent set Stamp the images of the leaves with leaf green ink and English Ivy ink on Deluxe flower shaping paper. Colour with matching inks and cut using the coordinating  die. Shape the leaves in the Leafy Accent  shaping mould.

Arrange the flowers and the leaves on the circle die cut. Finish the card by adding a sentiment cut from the paper collection.

Other Products: Die cutting machine, scoring board, hot glue gun, glue sticks

Instructions:

The finished card measures 6 x 6 inches. Cut one piece of white cardstock in deluxe flower shaping paper 12 by 6 inches and score at 6 inches to make a side fold card. Cut a 6 x 6 inch square from the paper #11B from the Feathery Florals Collection and glue it on the card. In pattern paper #3B cut a 5 3/4 x 5 3/4 piece of paper, distress the edge using a tool made for it or the blade of your scissors, draw a sewing line in green and glue it on your card with 3D foam.

Stamp your Wild Rose flowers with coral ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add prills and crystal lacquer.  

Put cheesecloth and sewing thread on your card. Also stamp and die cut the feathery floral image with leaf green and color it with zig markers. Glue it on cheesecloth. Glue 3 flowers over it. Add stamens through your flowers.

Stamp sentiment from Elegant Rose sentiments kit. Die cut and color with zig marker. Cut a bigger part from the same kit in coral paper #11B and glue your sentiment over it. Add crystal lacquer and when dry, glue with 3D foam on your card. 

Other Products: Diecutting machine, water mister, scissors, hot glue gun, cheesecloth, sewing thread,

Instructions:

Create a top fold card measuring 6 1/2” x 6 1/2”. Choose a designer paper from Feathery Florals Paper Collection and cut it to the size 6 1/4” x 6 1/4”. Adhere this paper on a white card base using glue. Cut a die cut from Luxe Gold card stock using Stairway Gardens Die. Cut a coordinating paper from the same collection, a little smaller than the die-cut so that the golden edges are shown. Adhere this panel on the ready card base. Cut a decorative die cuts from white card stock using Courtyard Elegance die. Now cut a circle piece from same designer paper collection to create window scene. Glue it on card center. Now adhere this decorative die cut on the card base using foam tape.

Choose and stamp the images from the Feathery Florals Cling Stamp Set on smooth white cardstock using jet black archival ink and paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Now give shape by using Deluxe flower shaping kit. Add Heart of Gold prills to the centre of flowers. Choose and stamp the images from Floral Feathers Cling Stamp Set and Petite Feathery Florals Cling Stamp Set on smooth white cardstock using versamark ink, heat emboss using golden embossing powder and paint them using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies.

For fillers, stamp, color and cut a few Wisteria flowers from Cascading Petals Collection using leaf green Archival ink.  hape the flowers using Deluxe Flower Shaping Kit. Now add Ribbit prills to the centre of flowers.

Add all the ready elements to the card as shown. Also cut a sentiment  “with love” from same designer paper and add to the card using foam tape. For final look, apply Crystal Clear powder to the flowers and leaves using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers Golden Heat Embossing Powder, Heat gun, VersaMark Ink.

Instructions:

My finished card is 5" x 7".  I used the Deluxe Flower Shaping paper to make card base. Cover with a piece of Sheet 8B of the paper collection that has been distressed around the edges. 

Use the Simply Oval Classic Frames dies to cut a piece of white cardstock and one out of the Luxe Gold cardstock. Glue these two together off setting each other so the gold peeps out from behind the white. Next I cut an oval from a piece of Sheet 5A of the paper collection and glued it behind the white and gold die cuts. I used dimensional tape to adhere to card front. 

Stamp the the Floral image from th Feathery Florals Cling Set using Toffee Crunch ink and die cut with coordinating dies twice. Also stamp the butterfly from the Petite Feathery Florals Cling Stamp using Toffee Crunch and die cut with coordinating die. Color with Prismacolor pencils and glue onto the card front. At this point I cut apart the flowers from one of the images and glued over the other to give a bit of dimension. I added glue to the center of the flowers and added Heart of Gold Prills and allowed to dry.  Add glitter and set aside to dry. 

Once everything is dry, the card is ready to go.   

Other Products: Die Cut Machine, White Cardstock, Dimensional Tape, Odorless Mineral Spirits, Blending Stumps, Prismacolor Pencils, PC995 Mulberry, PC911 Olive, PC912 Green Apple, Other pencils: Yellow

Instructions:

Cut a piece of white cardstock to 6” x 12 and score in half at 6” to form a 6 x 6” card base.  From HCDP1-2149 Feathery Florals Paper Collection cut a pieces measuring 6 x 6” from sheet 7B. Ink the edges using the HCDA2-450 Stack and Store Daubers in Olive Archival ink. Next from sheet 1A cut out the 6 x 6” panel in the bottom right hand corner of the page. Using a paper trimer, trim off the outside border of the panel leaving the first thin green line as the outer edge of the frame. Now using HCD1-7155 Circle Basic Large Die Set cut the circle out from the center of the panel. Using Luxe Silver Cardstock cut a piece 5 5/8” square as well as a scalloped circle from the HCD1-7154 Eyelet Circle & Basics Small Die Set. Next glue the green cardstock to the card base. Then adhere the panel to the 5 5/8” square of Luxe Silver Cardstock and adhere to the card base with 3D foam tape. Next glue the die cut circle from the panel to the scalloped silver circle and attach it to the card base using 3D foam tape. These layers give the card lovely added dimension and makes it look like you didn’t use a panel at all.

Stamp the florals from the HCPC-31017 Feathery Florals Cling Stamp Set and the sentiment from the HCPC-31004 Elegant Rose Sentiments Cling Stamp Set onto Copic X-press It paper using Memento Tuxedo Black Ink. Color using various pinks and greens Copic Markers to coordinate with the paper collection. Die cut using coordinating dies. Adhere to the card with foam dots in both single and double layers.

Add decorative rhinestones using Dries Clear Adhesive along with the Metal Tip Applicator for some extra shine. Finish the inside as desired. 

Other Products: 3D Foam Tape, 3D foam dots, Rhinestones, Copic Markers, Copic X-press It Paper, Paper Trimmer, Die Cut Machine.

Instructions:

Create 5 x 7” card base using white paper and largest Fancy Classic Oval Frame Die. To create top base, cut piece from designed paper collection using same die and place on the base of card. Die cut an outer frame from silver paper and paper collection using the decorative die from the same set and adhere to the card base using 3D foam tape for dimension.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Hollyhock Petals & Leaves Cling Stamp Set and Hollyhock Stem & Blooms Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create Floral Feathers, stamp the Floral Feathers Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Majestic violet, cut out with the coordinating die, shade using this same ink and Ranger Archival Ink Pad - Manganese Blue, shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut sentiment ticket from designer paper and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

Cut a piece of white cardstock, score and fold to get a 8 x 8 1/4" base. Cut a piece of paper from Feathery Florals Paper Collection to 3 3/4 x 8", the other one to 3.5 x 7 15/16" and a little bigger piece of the white cardstock. Cut out white and silver frames with the Slim Lattice Oval Die. Stamp 2 bigger florals from the Feathery Florals Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp feathers with Floral Feathers Cling Stamp Set in Leaf Green, Cactus Flower and Magenta Hue inks, color them slightly and cut out with coordinating dies. Adhere all elements to the base. 

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from the Curvy Floral Frame Cling Stamp Set onto Deluxe Flower Shaping Paper in Sunflower ink, diecut with coordinating dies, shape with Deluxe Flower Shaping tools and add Ribbit prills. Stamp 4 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. 

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils

Instructions:

For the card base take 13 by 7 3/4 inches cream cardstock folded into half from 13 inches, card base is ready in size 6 1/2 by 7 3/4 inches. Die cut the card from panel using cut mat create die and make a window on the front panel of the card.

Trim the 4 by 5 1/4 inches panel from Feathery Floral Paper Collection using sheet number 1A, add cream card under this panel measuring 4 1/4 by 5 1/2 using clear glue. Die cut the inside part of this layer using Cut Mat Create Die and add this inside piece of die cutting inside the card using clear glue. Stamp the sentiment inside from Celebrate Love Sentiment using Seedless Preserves Ink.

Die cut the inside frame from Ornate Rectangle Die on Gold Luxe card trim and add both sides of the window panel. Add this window on the card using dimentional tape, Die cut the frame from Slim Eyelet Heart Rectangle Die on Luxe Gold, trim and add boder under the window panel.

Stamp the images from Feathery Florals Cling Stamp Set on the deluxe card using leaf green ink, die cut using coordinating dies and color using Zing brush markers. Shape from the back using shaping kit, apply clear glue using sponge and cover with Nida Tanweer Magic Glitter Powder.

Stamp the small flower of poinsettia from the Large Poinsettia stamp set using Vibrant fuchsia ink, die cut using coordinating dies, color the flower using Wilted Voilet and Seedless Preserves inks using daubers, shape the flowers in the mold and make 3 flowers. Add decorative beads inside the flowers using hot glue, add clear glue on the sides of the beads and sprinkle some mini prills. Cover the flowers with Magic Glitter.

Stamp the small butterfly from the collection on vellum with Versamark ink, cover with Snowflake embossing powder and heat it using heat tool and die cut using coordinating die color from the back with zig.

Arrange all ready elements as shown using hot glue, embellish the card with Rhinestones and Nuvo Drops.

Other Products: Cream Cardstock, Hot Glue, Snow Flake Tinsel Embossing Powder, Nida Tanweer Magic Glitter Powder, dimensional tape, Nuvo Drops, Distress Ink Seedless Preserves, Wilted Violet, Decorative Beads, Rhinestones, Vellum.

Instructions:

The ready card base is 9 1/2 x 9 inches on White card stock, scored and folded into half to create a card base of 9 1/2 x 4 1/2 inches. Using White cardstock again, cut a piece measuring 9 1/4 x 4 1/4 inches, sponge the edges with Deep Purple ink and adhere to the inside card panels. Cut a desinger paper piece from HCDP1-2149 Feathery Florals Paper Collection to size 9 x 4 inches, sponge the edges with Deep Purple ink and adhere to the inside panel. 

Cut another piece of White cardstock to 9 1/4 x 4 1/4 inch size. Using HCD3-7435 Curvy Accent Border Dies, cut the White cardstock piece in a slanting manner as shown. Cut another piece of designer piece of 9 x 4 inches size and adhere to the White cardstock piece as a mat layer as shown. Again using the same border dies, cut 4 pieces of the delicate border on White cardstock, stack and glue 2 each and adhere them on the edges of the die-cut piece. Sponge the edges of this ready element using Deep Purple ink and adhere it to the card front using dimensional tape.

Stamp few images from HCPC-31017 Feathery Florals Cling Stamp Set, HCPC-31019 Floral Feathers Cling Stamp Set and HCPC-31018 Petite Feathery Florals Cling Stamp Set onto White cardstock using Fern Green ink. Color all the images using watercolors and cut them using the coordinating dies. Sponge some dries clear glue on each of the images and add crystal clear glitter. On the flower centers, add White micro pearls. 

Add a sentiment piece to the center of the card front with a White mat layer and the edges sponged with Deep Purple ink. Adhere the ready elements to the card front using dimensional tape as shown. Finally finish off the card by adding some White flat-back pearls around the arragement.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, White flat-back pearls, watercolors, water color brushes

Instructions:

Card size is 7 x 5”. Score and fold 7 x 10” white cardstock at 5” on the long side to create card base. Cut sheet 8B from the Feathery Florals Paper Collection 2x to 6 7/8 x 4 7/8”, ink the edges with Distress Oxide Wilted Violet ink and adhere one to the inside of the card and one to the card front using dries clear adhesive. Stamp the ‘Thinking of you makes my heart smile’ sentiment from the Friendship Sentiments Cling Stamp set on white cardstock using VersaMark ink, cover with Ranger Super Fine Detail Black Embossing Powder and heat set using the Heat It tool. Diecut using the Slim Elegant Rectangle Die and adhere to the inside of the card. 

Stamp the image from the Floral Feathers Cling Stamp Set on 6 5/8 x 4 5/8” glossy cardstock many times using VersaMark ink, cover with white embossing powder and heat set. Using a makeup brush, ink the stamped glossy paper with Distress Oxide Wilted Violet, Cracked Pistachio and Picked Raspberry inks. Let dry, then buff with a paper towel. Adhere to 6 3/4 x 4 3/4” white cardstock and adhere to the card front using dimensional tape. Stamp the ‘Let’s Celebrate’ sentiment from the Celebrate Love Sentiments Cling Stamp set on the glossy cardstock using VersaMark, cover with the black embossing powder and heat set. Diecut using the Slim Elegant Rectangle Die, diecut two more times from white cardstock, adhere together and adhere to the card front using dimensional squares.

Stamp the image from the Feathery Florals Cling Stamp set on the glossy cardstock using VersaMark ink, cover with the black embossing powder and heat set. Using a small paint brush, color using Wilted Violet, Cracked Pistachio and Fossilized Amber Distress Oxide inks. Diecut using the coordinating die, diecut two more times from white cardstock, adhere together and adhere to the card front using dimensional squares. 

Other Products: Diecutting Machine, Paper Trimmer, White Cardstock, Glossy Cardstock, VersaMark Ink, Ranger Super Fine Detail Black Embossing Powder, Misti, Distress Oxide Inks – Wilted Violet, Crack Pistachio and Fossilized Amber, Makeup Brush, Funnel Tray, Dimensional Tape, Dimensional Squares

Instructions:

Card size 6” x 6” (final size). Take pattern paper from HCDP1-2149 Feathery Florals Paper Collection and adhere it on card base.

Cut border die from HCD3-7442 Curvy Decorative Border Die on white cardstock 6” x 6”, cut it on top and bottom and paste the border die on top of the pattern paper. On the remaining white cardstock, stamp feather image from HCPC-31019 Floral Feathers Cling Stamp using archival ink-magenta hue, adhere it with foam tape.

Stamp HCPC-31017 Feathery Florals Cling Stamp using versamark ink, and sprinkle gold embossing powder, heat it and cut it with coordinating die HCD1-7453 Feathery Florals Die, add crystal clear glitter randomly, and adhere it with foam tape. Using same stamp set, stamp one more image using archival ink-magenta hue, cut just flower image,  color it using same ink and sprinkle crystal clear glitter and add clear beads, and adhere it using foam tape as  pictured.

Stamp butterfly image from HCPC-7454 Petite Feathery Florals Cling Stamp on white cardstock using archival ink-mulberry, cut them with coordinating die, color them using archival ink-pink peony and add crystal clear glitter. Adhere using hot glue gun.

Cut one die from HCD3-7447 Slim Elegant Rectangle Die on white cardstock and add sentiment from HCPC-3845 Just For You Sentiments Cling Stamp using archival ink-magenta hue. Stamp feather image from HCPC-31019 Floral Feathers Cling Stamp using archival ink-magenta hue and add crystal clear glitter

Other Products: Big Shot Plus Machine, VersaMark Ink, Hot Glue Gun, Clear Beads

Instructions:

Ready tent fold card measures 6"× 8". To create base, take a piece of white cardstock measuring 8.5" × 6". Score on 1/2" from longer side and fold it to create tab. Apply red tacky tape on tabs and glue it on piece of white cardstock measuring 8" × 6". Cut a mat from designer paper measuring 5.75" × 7.75". Glue it on card base and cut a window using oval die from Filigree Oval Frames Die set. Take an acetate sheet measuring 5.5" × 7.5" and glue it on card to cover window. Stamp sentiment on a white cardstock strip which is 0.75" wide using deep purple archival. Glue it on gold cardstock strip which is 1" wide. Glue it on card as shown. Cut another mat from designer paper measuring 5.25" × 7.25", glue it on white cardstock measuring 5.5" × 7.5". Cut an oval window into it using same oval die. Adhere it on card using dimensional tape. Cut a decorative frame from white cardstock using die from the same set and glue it on card as pictured. 

 Stamp Floral images and feather image on watercolor paper using black archival. Paint images using zig markers and cut with coordinating dies. Slightly emboss Them using ball tool. Arrange them on card and glue using foam dots. Apply Crystal Clear on flowers and leaves using Art Glitter Clear Dries adhesive. Take a piece of white cardstock measuring 5.75" × 7.75", score lines on it to create texture and glue it inside card panel. 

Other Products: Smooth White Cardstock, Dimensional Tape, watercolor paper

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9" and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Feathery Floral Collection and cut measuring 9" by 4", and frame it with a panel cut from Luxe Gold cardstock creating a delicate border of 1/16" on all four sides. Layer the panel on the ready card front using dimensional tapes. 

Next, cut one each of white and gold die-cut using HCD3-7447 Slim Elegant Rectangle Die. Glue white die cut on the bottom a little off-center to create the shadow. Layer this die cut on the card front using tiny foam dots. Choose the pattern paper from the designer paper collection and cut the center solid piece. Layer this panel using foam dots in the open window space. 

Next, cut a frame out of white cardstock using the 3rd and 4th die from the outside of the HCD1-7155 Circle Basics Large Die set and layer it on the solid piece of vellum circle cut using the 4th die from the same die set. Layer it on the card front as shown. 

Stamp the image from HCPC-31017 Feathery Florals Cling Stamp Set with black archival ink on smooth white cardstock and paint it using Zig Clean Clear Brush Markers. Once the painting is done, cut the image using its coordinating die set and glue 2 extra die cuts on the bottom for extra strength. Once the floral element is ready, adhere it as a main focal image on the card front and complete the card by adding a stamped sentiment from the HCPC-3847 Celebrate Love Sentiments Cling Stamp Set.   

Other Products: Smooth White Cardstock, Die Cutting Machine, Score Board, and Foam Dots

Instructions:

Card size:  6 x 6”. Use the Simple Centerpiece largest die to cut card base, making sure fold is just inside the cutting edge at the top so that it will not cut. Cut a card front and the inside of card with the same die on decorative green and purple paper, then glue them to card front and inside.

Cut the large decorative die of Elegant Hearts Centerpiece from gold cardstock and from white cardstock, glue them together slightly off-set. Cut an octagon frame size 3 x 3” using 2 Simple Centerpiece smaller dies together (One 3” and the other 2 1/2") from gold and from white, glue them together again slightly off-set. Glue the 2 frames onto card front, centering.

Stamp the sentiment using Deep Purple Ink onto white, die cut it with a Simple Centerpiece die 2” then cut a gold 2” as well, glue them together as before, off-set. Glue the sentiment to the center of card front.

Stamp Feathery Florals, Floral Feathers and the butterfly from Petite Feathery Florals using black ink onto white, die cut all then color with chosen method (Copic Markers used for this sample). Form slightly from the back using the Deluxe Flower Shaping Kit with the largest stylist ball. Glue the butterfly body (pop up wings) to the left side of the octagon frame and glue and pop up the Feathery Florals, Floral Feathers to the right side of card.

Stamp Small Wild Roses using Deep Purple on Deluxe Flower Shaping Paper, sponge with Deep Purple, die cut then sponge edges again. Form in the Shaping Mold then squeeze tips together for a ruffled look. Make one small flower a bud. Punch a small flower from green to make a sepal for the rose bud and glue it in place. Fill flower centers with Prills then glue them in place on/around Feathery Florals.

Glitter the butterfly and the flowers using the Crystal Clear and Dries Clear Adhesive with a sponge. 

Other Products: White cardstock, Glue gun, small pointy flower punch for sepal, Copic Markers: BV00, BV02, V01, V12, V15, YG11, YG05, G02, Y11, Y15, Y38

Instructions:

Prepare a white card base 51/2 x 71/2”. Cut a piece of Feathery Floral paper 1/4” smaller, highlight the edges with Majestic violet ink and adhere to the card base. Use the largest die from the Rectangle Filigree set and cut out of white card stock, add to the card base.

On white card stock stamp both the images with black ink, color in with the Prisma Color pencils. Cut out with the coordinating die, add the large one at the top and the smaller one ant the bottom.  

Stamp the butterfly from the petite Feathery Floral set on white with black ink, color with the pencils, cut out with the coordinating die and add to the card between the flowers.

Cut out the sentiment tag from the paper pack and adhere to the card.

To finish, add 3D Crystal Lacquer to all the leaves and flowers and add glitter

Other Products: Paper trimmer, Die cut machine, Prisma Color pencils,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of Deluxe Flower Shaping Paper 4 7/8” x 6 7/8” and emboss with the Tufted embossing folder and adhere to the front of the card. Die cut three decorative ovals using the Nos. 3 and 4 dies from the HCD2-7381 Fancy Classic Oval Frame Die out of Deluxe Flower Shaping Paper. Stack the three dies together, add Frosting Powder with Dries Clear glue on a sponge and adhere to the front of the embossed panel. Adhere the plain oval from the previous die cut to the centre of the oval. Using a stamp positioner stamp the sentiment from the HCPC-4846 Thank You Sentiments Cling Stamp Set in Jet Black ink.

Stamp the floral images from the HCPC-31017 Feathery Florals Cling Stamp Set in Jet Black ink.  Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the images to the top right and bottom left of the decorative oval with foam squares.

Stamp the butterfly image from the HCPC-31018 Petite Feathery Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the card over the leaves on the bottom right of the card with foam squares. Add Crystal Ultrafine Glitter to the butterfly wings with Dries Clear glue.

To finish add Simply White Nuvo Drops to the embossed background and sprinkle with Crystal Clear glitter.

Other Products: Iris Cardstock, Nuvo Crystal Drops - Simply White, foam squares, stamp positioner, Spellbinders Embossing Folder - Tufted

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5 x 6.5" piece of green paper from the Feathery Florals Paper Collection and adhere to card front. Cut the frame from the Rectangle Filigree Frame Die in white card stock and adhere to card front. Cut out the center die in white cardstock and adhere. Cut out the inner die in lavender paper from the paper collection and adhere with foam tape.

Stamp the feathers from the Floral Feathers Cling Stamp Set in Jet Black, sponge with Vibrant Violet, Vivid Chartreuse and Paradise Teal, cut out with coordinating dies and add glitter.

Stamp the Small Wild Rose Cling Stamp Set in Vibrant Violet, sponge with Vibrant Violet and Sunflower, cut out with coordinating dies and sculpt with the Small 3D Wild Rose Shaping Mold, add stamens and glitter.  

Stamp the sentiment from the Just for You Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the smallest die from Slim Elegant Rectangle Die. Cut out a frame in green designer paper with the next larger die and adhere with foam tape.

Adhere feathers, flowers and sentiment as shown.  

Other Products: White cardstock

Instructions:

Take a 7” x 5” tent fold card and cover with purple paper from the Feathery Florals Paper Collection. Take the Rectangle Filigree Frame Die Set and die cut the outside edge in white card twice. Adhere together with Designer Dries Clear Adhesive. Die cut the inside Frame of the large Filigree Frame in purple paper from the paper collection. Die cut the smaller Filigree Frame in pink paper from the paper collection. Adhere all these to the front of the card.

Stamp onto Deluxe Flower Shaping Paper, the largest Feathery Florals Cling Stamp from the Feathery Florals Cling Stamp Set three times, in Ranger Archival Olive ink. Stamp the smaller Feathery Floral once. Stamp the butterfly from the Petite Feathery Florals, once. Color in with Olive ink and Ranger Distress Dusty Concord ink, using Daubers. Die cut with the matching dies.  Shape all the leaves with the stylus from the Deluxe Flower Shaping Kit.

Adhere the large Feathery Floral Flower to the middle of the card. Cut the flowers from two large Feathery Floral Flowers, adhere the flower layers using foam tape to the Feathery Floral die cut. Cut apart the smaller Feathery Floral, adhere to one corner. Adhere the butterfly. Apply Dries Clear Adhesive to the flower centers. Add Lettuce Entertain You Prills.

Stamp a sentiment from the Thank You Sentiments cling stamp set in Olive ink. Die cut with a tag from the Arrows and Banner Die Set. Adhere to the small Feathery Floral. Sponge Dries Clear Adhesive over the flowers, leaves and butterfly, add clear glitter. All done.  

Other Products: 7" x 5" card blank, white card, Ranger Distress ink - Dusty Concord, foam tape, clear glitter

Instructions:

Card size is 4 1/2 x 5 1/2". Stamp the image from Feathery Florals Cling Stamp set on a piece of deluxe flower shaping paper using jet black archival ink. Die cut it using matching die from Feathery Florals die. Colour the image using Altenew watercolours.

Die cut 2 pieces of white cardstock using the die from Delicate Daisy Corner & Border Die. Adhere these die cuts on a 4 1/4" x 5 1/2" top folding white card base. Adhere the Feathery Florals image on the card front as shown.

Cover the flower centers with white blizzard nuvo drops to add finishing touch.

Other Products: Altenew watercolours, brustro green gold brushes and white blizzard nuvo drops