Instructions:

Cut Deluxe Flower Shaping paper to 10 x 7", score and fold at 5" to create card base. Cut a 5 x 7" size panel from sheet 5A of the Elegant Mosaics Paper Collection. Lightly sponge the edges with Garden Patina ink and layer onto card base. Cut Deluxe Flower Shaping paper to 4 13/16 x 6 13/16" size. Stamp the HCPC-3978 Floral Mosaics Cling Stamp Set in Versacolor White ink 3 times to create a background pattern in the center of panel. Sprinkle with Bridal embossing powder and heat set. Lightly sponge the background with the Cactus Flower and Garden Patina ink. Lightly sponge the edges with Cactus Flower ink. Attach panel onto card base.

Stamp round floral mosaic twice from HCPC-3978 Floral Mosaics Cling Stamp Set in Forget-Me-Not ink onto Deluxe Flower Shaping paper. After cleaning stamp, repeat the previous step, this time using Cactus Flower ink. Clean stamp again and reuse, this time stamp once in the Leaf Green ink. Stamp the border from HCPC-3978 Floral Mosaics Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper. Clean stamp and reuse, this time in VersaColor White twice and embossed with Bridal embossing powder. Die cut all the images with the coordinating dies. Diecut the round base of HCD1-7389 Floral Mosaics Die from sheet 11B of the paper collection. Diecut two of the borders from bottom right panel of sheet 10A. Stamp the ‘Happy Birthday’ sentiment in Cactus Flower on Deluxe Flower Shaping paper and trim to size.

Use the markers, blender, ink and daubers to color the images. For the teal round border frame use the Light Blue and Turquoise Green markers along with blender to color. Use the same colors for the blue flowers. Use the Pink and Purple markers along with blender on the pink eyelet frame. Use the same markers with blender on the pink straight eyelet border. Use a sponge with Garden Patina ink to add color to the two blue straight eyelet borders. Use the May Green, Light Green and Pale Green markers along with blender to color the leafy piece. Sponge the two pink flowers with Cactus Flower ink and Pink and Purple markers with blender. Dab VersaColor White ink over pink leaves and heat emboss with Bridal embossing powder. Sponge leaves with a touch of Cactus Flower ink. Lightly sponge straight edges of border with Cactus Flower ink. Lightly sponge the edge of sentiment with Garden Patina ink. Dab a light sheen of Crystal Lacquer over teal round border frame, pink eyelet frame, pink eyelet border, leaves and flowers.

Use the shaping stylus from Deluxe Flower Shaping kit to shape flowers and leaves. Layer three of the round border frame on top of each other for extra thickness. Layer this onto teal round base with dimensional adhesive. Layer pink eyelet frame inside of teal frame. Next, layer leafy piece using dimensional adhesive. Layer two pink flowers in center using dimensional adhesive. Attach the mosaic piece to center of card using dimensional adhesive. Layer white embossed border on top of blue borders and attach onto card with dimensional adhesive. Trim apart eyelet border piece and attach as shown. Cut apart blue flowers and attach onto card as shown. Cut apart pink leaves and attach around mosaic as shown. Add sentiment. Add rhinestones. Finally add a touch of glitter using Dries Clear glue.

Other Products: Mint Julep Art Glitter, Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Card size: 6 x 6. Make a card base with white 6 x 12” cardstock then fold in half for a 6 x 6” card. Cut 1 silver piece of cardstock to 6 x 6", 1 to 5 1/2 x 5 1/2", 1 to 5 1/8 x 5 1/8" and cut 3 silver Simple Centerpiece frames (using 2 dies together) that measure 5 x 5” (outer diameter and 4 3/4 x 4 3/4" inner diameter).

Cut decorative paper as follows: 1 outer piece 5 7/8” square-multi color, next 5 3/8” square-purple, next 4 7/8” square-aqua. For inside, 1 5 7/8” square-green with a bottom border. From this inside piece, cut an eyelet circle (largest of the Eyelet Circles Small). You will use this spot for the sentiment so die cut where you would like the sentiment to eventually go. Using the same eyelet die, cut a purple eyelet circle. Set aside inside pieces (green panel and purple circle) for later.

Stamp Mosaic 4 times, once in each of 4 colors, Majestic Violet, Paradise Teal, Vivid Chartreuse and Bright Tangelo, die cut each and use the layers in a stack with foam sheet or pop ups under each layer, starting with Teal then violet, green and finally orange (do not glue yet), sponge each layer with the same color as stamped. Die cut silver with the same dies for each layer. Glue the silver off-set a bit under each colored panel, once all layers are glued, glue foam or pop ups under layers. Use Nuvo white and Stickles as desired to decorate the layers then set aside to dry.

When Stickles is dry start layering the front of your card as follows: Silver, Multi color. Glue foam under the next silver with purple then glue to card. Glue foam to the next silver with aqua then glue to card. Now glue green eyelet circle to the center of aqua panel. Layer the silver centerpieces off set so that it basically makes a circle on top of the aqua panel. Glue the Mosaic stack made earlier to the center of green circle.

Stamp Mosaic border using Majestic Violet 2 times. Cut borders to fit the 4 aqua corners (in the sample they overhang the aqua panel to line up with the purple panel under).

For the inside: glue the green panel to the inside of card then glue the purple circle in the circle opening. Die cut a smaller circle from green patterned patter and glue it to the center of purple. Stamp Good Things sentiment using teal then die cut with circle die. Glue it to the center of other circles. Glitter card using Crystal Clear.

Other Products: White cardstock, foam sheet, Crystal Stickles

Instructions:

The ready top fold card from the smooth white cardstock measures, 4 1/4" by 8 1/2″. To prepare the top panel, choose the paper from the designer paper collection and cut it to size measuring 3 3/4″ by 8″. Distress all the sides using sharp scissors and mat it directly on the white cardstock measuring 1/8″ larger. Next, layer it with one layer of foam tape on coordinating paper from the same paper collection. Finally, layer the prepared panel with one layer of foam tape on the ready card base.

Stamp the image twice from Floral Mosaics Cling Stamp Set using white pigment ink on smooth white cardstock and sprinkle white heat embossing powder. Dust extras and heat set the images using a heat tool. Cut the 2 required layers using its coordinating die and color them using distress inks, Peacock feathers, and Mowed Lawn. 

Cut a strip measuring 2" X 8" from the deep green color paper from the same paper collection and mat it on another strip of Luxe gold cardstock creating a sleek border on the top and the bottom end. Layer the strip on the card front as shown. To the panel, layer the heat embossed images close to each other. 

For Clematis Flower, stamp 6 pieces of large and 6 pieces of medium-sized Clematis flowers using Leaf Green Archival ink on Flower shaping paper and cut them using their coordinating dies. Color the flowers using the same ink and shape them using the Deluxe flower shaping kit. Prick the holes in the center and secure the pollens with a heat tool. Prepare 3 medium-sized and 3 small flowers. Stamp one petal each of one size smaller sized petal from the same set using Library green/ Cobalt Blue archival ink on green color cardstock and cut them using coordinating dies. Using the crushing technique, create calyx and complete the flower securing them behind each flower for the complete flower look. Adding calyx is totally optional. 

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp, cut, and color a few wisteria flowers using leaf green archival ink and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once all the elements are ready, make a small floral display using all flowers, fillers, and foliage. Complete the card by adding sentiment tag cut using Ornamental Tag Die. 

Other Products: Smooth White Cardstock, Die Cutting Machine, Score Board, Scissors, Timholtz Scale, Hero Arts White Pigment Ink, Funnel Tray, Seed Beads, Glossy Accent, Double Sided Tapes, and Tacky Glue.

Instructions:

Cut a piece of white cardstock to 4.5 x 11.4", score at 5 5/8" and fold then use the biggest tag from the Album Tags and Accents to cut out a base. Cut out another white tag and adhere them together to get a base. Cut a piece of paper from Elegant Mosaics Paper Collection to 4 x 6,5" and cut out a smaller tag with the same die. Cut out the smallest doily with the Fancy Classic Rectangle Frame Die. Stamp the sentiment in Leaf Green ink using Celebrate Love Sentiments stamp set and cut it out.

Stamp the biggest mosaic from the Bursting Bloom Mosaics Cling Stamp Set in Sunflower ink and cut out with the biggest coordinating die. Stamp 2 mosaics in Cactus Flower ink and cut out with the smaller die. Stamp another mosaic in Sunflower ink and cut out with the third coordinating die. Color all mosaics with the same inks.

Stamp blossoms from Curvy Floral Frame Cling Stamp Set and 3 smaller blossoms from Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper. Color all elements with the same inks. Shape magnolias with the mold and small flowers with Deluxe Flower Shaping Tools. Add some Pastel Pearl Medium Stamens to their centers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 3 branches from Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color with the same ink and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. Add some crystals.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, self-adhesive crystals

Instructions:

Cut out a white Rounded Window Frame. Cut two strips of blue paper from the Elegant Mosaics Paper Collection to 4 x 12", score vertical lines every 0,5" then fold the strips into an accordion and glue both ends together. Pinch the middle part to form a rosette shape, adhere the bottom part with a piece of paper and adhere the rosette to the doily. Cut a strip of paper from the Elegant Mosaics Paper Collection to 4 x 12", roll it up to get a lollypop stick. Adhere it to the rosette and add some string and ribbon.

Stamp the biggest mosaic in Magenta Hue ink using Elegant Mosaics Cling Stamp Set and cut out with the biggest coordinating die. Color the edges with Cactus Flower ink. Stamp 2 mosaics in French Ultramarine ink and cut out with the second and third die. Stamp another mosaic in Magenta Hue ink and cut out with the smallest coordinating die. Color all mosaics with the same inks. Stamp the Baby Koala in Tuxedo Black ink and Baby’s Friends Cling Stamp, color it with promarkers and cut it out.

Stamp blossoms from Curvy Floral Frame Cling Stamp Set and 3 smaller blossoms from Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower and French Ultramarine inks onto Deluxe Flower Shaping paper. Color all elements with the same inks. Shape magnolias with the mold and small flowers with Deluxe Flower Shaping Tools. Add some Pastel Pearl Medium Stamens to their centers. Stamp 1 branch from Leafy Accents Cling Stamp Set in Leaf Green ink, color it, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. Add some crystals.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scoring board, scissors, die cutting machine, white cardstock, sisal, self-adhesive crystals, promarkers, string, ribbon

Instructions:

Ready card base measures 9 by 5 7/8", trim light blue cardstock measuring 8 3/4 by 5 5/8" adhere on the card base using clear glue. Trim white panel from Deluxe Paper measuring 8 1/2 by 5 1/2" and add on the card base using clear glue, trim designer paper from Elegant Mosaics Paper Collection, Sheet number 5A measuring 8 1/4 by 5 1/4" and adhere on to the card base using clear glue.

Stamp the image from Bursting Bloom Mosaics Stamp using Archival Periwinkle Ink on white and die cut with shadow die and stamp same image on pink cardstock using same ink and place first shadow die and flower shape die and die cut the image. Arrange as shown using foam strips and adhere on the card base using dimensional tape.

Stamp flowers on Deluxe cardstock with versamark embossing Ink, cover with white embossing powder and heat  using heat tool, stamp the small flowers on pink card using Distress Kitsch Flamingo Ink die cut the images using coordinating dies, color the white flowers with Archival Periwinkle Ink, shape the flowers using golf groove tool and make few flowers using Deluxe Kit and hot Glue Gun add mini prills in the centers using clear glue, apply clear glue onto the flowers with hydra sponge and cover with Nida Tanweer Magic Glitter Powder.

Stamp the leaves and branches from Floral Shoppe Collection on Deluxe card and vellum using Leaf Green ink and versamark ink, color it after heat emboss color the leaves with leaf green, shape all accents with shaping kit and apply clear glue and cover with Magic Glitter.

Stamp the sentiment "Happy Mother's Day" from Thank You Sentiments Cling Stamp using Periwinkle ink on designer paper and trim, add white card underneath as a border and add this tag on the card front using clear glue.

Arrange all ready elements and lace using hot glue and embellish the card with magic glitter, Nuvo Drops and Crystal Lacquer.

Other Products: Die Cut Machine, Light Pink Cardstock, Light Blue Cardstock, Nida Tanweer Magic Glitter Powder, Vellum Paper, Versamark Embossing Ink, Distress Ink Kitsch Flamingo, Nuvo Drops, Dimensional Tape, Hot Glue, Lace.

Instructions:

The ready top fold card measures, 7″ x 7″. For making the card base you will need two pieces of cardstock measuring 7″ x 7″ and 7 1/2″ x 7″. Score the second piece on 1/2″ and crease well using a bone folder, making a hinge. Add glue on the hinge and secure the first piece on top.

Choose the pattern paper from the Elegant Mosaics designer paper collection and chop it to 6 1/2″ X 6 1/2″ using a paper trimmer. Layer the panel on white cardstock making a border of 1/16″ on all four sides. Cut 4 corners from Gold Luxe cardstock using Fanci-Fold Pocket & Accents Die and glue them behind each corner. popping a little out as an extra accent. Choose and cut coordinating pattern paper and create another layer. Glue the ready panel on the card front as shown.

Cut all the required die cuts from white and Luxe Gold cardstock using Simple Centerpiece and Elegant Hearts Centerpiece dies and layer them using double-sided tape.

Stamp the image from Floral Mosaics Cling Stamp Set, using Seafarer 4 times on smooth white cardstock, and paint each layer separately using Zig Clean Clear Brush Markers. Cut each layer using its coordinating die.

For Blue Asters, Stamp a couple of petals from Wild Aster Cling Stamp Set using French Ultramarine Archival Ink and cut them using its coordinating die. Color the petals using the same ink and shape them using golf groove tools. Create one large, 3 medium, and one small-sized Aster. Complete the flowers by adding the prills in the centers.

For foliage, Stamp the images from Leafy Accent stamp set with Olive green archival ink and paint them using Leaf green Archival ink. Cut the foliage using its coordinating die. Shape the leaves using a groove golf tool.

Stamp, cut, and color a few wisteria flowers using Bright Tangelo and Carnation Red Archival inks and shape them using a flower shaping kit. Add flower pollens using a glossy accent and use these flowers as fillers.

Once all the elements are ready, make a small floral display using all flowers, fillers, and foliage. Complete the card by adding a sentiment from Special Birthday Sentiments Cling Stamp Set. 

Other Products: Smooth white cardstock, Die Cutting machine, Score Board, Bone Folder, Glossy Accent, Double Sided Tape, Flower pearls.

Instructions:

Card size: 6” x 6”. Cut 1 panel off the Bi-Fold card base. Die cut 2 stands from white using the Swirly Accents Spray die set. Die cut 2 eyelet circles using the Rounded Eyelet Window die set from decorative paper. Cut 2 purple decorative paper panels using the outer die of the Simply Elegant Centerpiece die set. Cut 1 turquoise decorative die cut from Simply Elegant Centerpiece. Cut 1 decorative paper Mosaic piece for the inside sentiment circle, cut 1 3 5/8” decorative paper-multi color using circle die.

Glue 1 patterned eyelet circle to the front and 1 to the inside of card. Glue coordinating purple Centerpiece over eyelet on both front and inside. Glue the turquoise decorative paper centerpiece to purple on the front only then glue the multi color circle to the center.

Stamp 4 Floral Mosaics using London Fog (or other gray ink). Die cut each layer smaller and smaller using dies provided in the set. Color each layer with colored pencils as desired to match chosen papers used. Use foam dots, strips or sheet to pop uo each layer of mosaic then glue the stack to the center of circle. Decorate with different colors of glitter glue ending with a rhinestone in the center.

Stamp For My Friend using Deep Purple then trim as close as possible and fishtail end. Add a small purple pearl to 1 corner, tuck the other corner under a bit of simply Elegant Centerpiece turquoise die cut. Glue to secure.

When all glitter glue is dry, open card and finish by gluing the mosaic die cut to the purple layer. Stamp the circle sentiment from Just For You using purple then glue it on top of mosaic. Glue the 2 stands on the back of front and the back of card (make sure they are even with each other and with card circle bottom. These will help your round card stand upright instead of off kilter. Glitter card as desired.

Other Products: White cardstock, rhinestones, pearls, Stickles-various colors, London Fog Memento Ink, colored pencil set

Instructions:

The blue patterned paper is the 12 x 12" background for this layout. Using the Floral Mosaic image stamp onto dark green cardstock 4 times using an embossing pad and gold embossing powder and heat set. Cut all of these pieces in half. Stamp it again onto navy cardstock using an embossing pad an gold embossing powder. Cut this one into 4 pieces. Stamp and die cut 2 of the border strips onto navy cardstock using an embossing pad and gold embossing powder and heat set.

Adhere the navy mosaic pieces to the corners of the layout using 2 layers of foam tape. Add the half pieces all the way around the layout using 1 layer of foam tape.

Mat the 4 x 6" photo in white and then navy cardstock and adhere to the middle of the layout using 2 layers of foam tape. Add the decorative border strips using foam squares.

Stamp and die cut 6 of the fern images onto white cardstock using dark brown ink (Staz On- Timber Brown). Add color to them using a lighter green mister (Color Bloom 2- Golden Oregano), then splatter with the darker green mister (Dimensional Ink Spray- Bamboo Leaves). Let dry completely. Shape the fern leaves using the Deluxe Shaping Kit. Add the fern pieces above and below the matted photo using adhesive dots.

Other Products: Cardstock (White, Navy, Dark Green), Embossing Pad, Gold Embossing Powder, Color Bloom 2 Spray- Golden Oregano, Dimensional Texture Spray- Bamboo Leaves, Scrapbook Adhesives by 3L (E-Z Runner Ultra, Adhesive Dots Small, Crafty Foam Tape, 3D Foam Squares)

Instructions:

Onto the front of a DL card blank (4 x 8 1/4”) mat and layer Elegant Mosaic Paper Collection sheet 2B edged in Vivid Chartreuse onto Luxe Gold Cardstock and the same paper to the inside of the card edged in Vivid Chartreuse.

Stamp in Night Sky onto white cardstock For My Friend Sentiment ‘I am so grateful for you’ and die-cut with Rounded Window Frame. Die-cut another Rounded Window Frame with Luxe Gold Cardstock adhere behind to create a shadow. Adhere inside the card.

Cut Elegant Mosaic Paper sheet 9B 1 3/4 x 8 1/4”. Stamp in versamark onto white cardstock 4x Bursting Bloom borders, gold heat emboss and die-cut. Adhere the borders along the blue paper strip with the join at the centre.

Stamp in versamark onto white cardstock 6no. Bursting Blooms and gold heat emboss. Colour 2x in full using Zig Clean Colour Real Brush Markers. Match the colours 2x next size down, 1x next size down, 1x the next size down.

With a trimmer cut one of the complete coloured Bursting Blooms in half. Temporarily adhere the blue strip to the card front and each Bursting Bloom over at one end. Position the die over the half die-cut and tape to the blue strip, run through the die-cutting machine. Repeat with the other half at the opposite end of the blue strip.

Adhere the blue strip onto the card front and adhere into place the 2x Bursting Bloom halves. The Bursting Bloom halves are flush with the blue strip and borders. TIP: try to adhere the halves into place at the same time as the blue strip to ensure all the die-cut pieces slot into each other.

Stack up the Bursting Bloom die-cuts using dots offsetting each layer and add to the card.

Stamp onto white cardstock in Night Sky ink Just For You Sentiments masking off ‘For My’ and only stamping ‘Friend’. Die-cut with the smallest Arrows and Banner edged in Night Sky and adhere into the stacked Bursting Bloom.

Add self-adhesive coloured pearls onto the Bursting Blooms Mosaics.

Other Products: Paper trimmer/scissors, self adhesive coloured pearls, versamark

Instructions:

Create a 4” gatefold card blank with white cardstock cut 8 x 4” and lay landscape in score-pal, score at 2” and 6”.

Stamp Elegant Mosaic in versamark onto white cardstock and gold heat emboss. Colour with Zig Clean Color Real Brush Markers and die-cut. With a trimmer cut the die-cut in half. Use a permanent gold marker to run down the cut edges of both halves. Line the cut edge of one of the halves to the crease line of the gatefold and temporarily secure. Lay the die over the half die-cut ensuring in the correct position and tape the die in place. Remove the half die-cut. Position the top die-cutting plate over the die and flush with the crease line. Run through the die-cutting machine, this will create a partial die-cut. Repeat on the other side using the second die-cut half. Adhere the half die-cuts onto the shaped gatefold flaps.

Add Elegant Mosaics Paper Collection 9B edged with Night Sky to the centre. Stamp in versamark onto white cardstock and gold heat emboss the Just for You Sentiment ‘You are so Thoughtful’, die-cut with the smallest Simple Centerpiece. Die-cut the next size up with Elegant Mosaics Paper 2B edged with Vivid Chartreuse. Mat and layer together and add centred inside the card.

Stamp the border in versamark onto white cardstock and gold heat emboss and die-cut.

Stamp Elegant Mosaic 2 times in versamark onto white cardstock and gold heat emboss. Match the colours with Zig markers as before and die-cut one of each of the smaller designs. Mount the smaller offset over the larger using dot.

Die-cut in white cardstock Ticket and Tags, lay landscape in scor-pal and score across the taper to create a tab. Adhere the tag centred and flush to the bottom of the gatefold to display the card upright.

Cut a velum strip 1” x 8 3/8” hold centred over the gatefold and wrap slightly loose overlapping and securing the ends. Adhere the border die-cut over the join and adhere die-cut topper onto the border.

Other Products: Paper trimmer/scissors, gold sharpie marker pen, versamark

Instructions:

Cut out the white base of the card and fold it to 8" x 5 1/2". From the paper collection, cut a 7 3/4” x 5 1/4" and glue to the base. Cut a 6 3/4 "x 4 1/4" rectangle from the white paper, then cut a 6 1/2 "x 4" rectangle from the paper collection and adhere.

Stamp the frame from the Bursting Blooms Mosaics set 4 times and the banner from the same set twice and the sentiment with with VersaColor ink onto white paper and emboss with golden powder. Die cut with the coordinating die.

Color all the elements with watercolor markers.

Cut the sentiment with scissors.

Glue everything as shown with Double Dots -3D.

Other Products: Big-Shot Machine

Instructions:

Cut a 6.5" square pink stripe paper from the collection and edge with cantaloupe ink, adhere onto a 6.75" red paper, then onto the white 7 x 7" card base.

Stamp the border 3 times onto white card using versamark, cover with gold embossing powder, remove excess and heat to set. Die cut all borders. Cut a 4.5" x 5.75" red paper and adhere one border to the longest edge, overlapping slightly at the top. Adhere the red paper to the centre of the card base.

Cut a white piece of card 4.25" x 5.5". Adhere the 2 remaining borders together overlapping in the centre and adhere to the reverse of the longest side overlapping top and bottom. Add the white card to the centre of the red paper using foam pads.

Stamp the elegant mosiacs onto red paper using versamark, cover with gold embossing powder, remove excess and heat to set. Die cut all pieces. Adhere the largest to the bottom right of the card so that it touches the red border around the card.

Select panel from the paper collection, stamp the sentiment in versamark and gold heat emboss. Adhere to red card and trim to 4" x 5.25".

Add the 2nd size circle to the top left of the panel as shown and adhere to the centre of the card base using foam pads. Snip a 2nd circle to create some additional pips along the side of the panel.

Die cut a tag from the paper collection, tie with some thin bakers twine, cut to size and adhere under the sentiment panel.

Add the 2 smallest mosaic circles as shown to complete the card

Other Products: white card, bakers twine, versamark, red card

Instructions:

Make a shaped card base using the Simple Centerpiece die set. Cut a piece of Deluxe Flower shaping paper to fit the largest size of the Simple Centerpiece die. Fold the paper and place the die in a way that a part of the upper edge of the die is outside the fold. Cut through the die cutting machine to get a shaped card.

Cut two pieces of die cut using the Elegant Hearts die set from the Elegant Mosaic Paper collection and deluxe flower shaping paper. Adhere the two pieces together, off setting a little and adhere the whole piece on the card.

Cut a piece of die cut using the center decorative die piece and the pattern paper. Adhere this on a piece of plain die cut from the Deluxe flower shaping paper and adhere the whole piece on the center of the Elegant Hearts die cut piece.

Stamp the border image 4 times from the Elegant Mosaic stamp set with Jet Black ink on Deluxe Flower shaping paper. Colour in shades of Pink and purple using Zig Real Brush pen. Cut with matching die. Adhere the  border die cuts on the card front.

Stamp the images 3 times from the Elegant Mosaics Stamp set with Jet Black Archival ink on Deluxe flower shaping paper. Color with Zig real brush pens. Use the different layers in the Elegant Mosaics die set to cut the Elegant Mosaics image in layers. Adhere them together to create a dimensional piece. Adhere this piece on the right corner of the card using dimensional tape.

Stamp a sentiment from the Celebrate Love sentiment set using Jet black ink and add to the card.

Other Products: Scoring board, die cutting machine, dimensional foam tape

Instructions:

Stamp the Floral mosaics Cling Stamp Set on a 5" x 5" white card base seveal times to cover all the edges. Take a 4" x 4" piece of white cardstock and draw a thin line on the edges using any black marker or pen. Adhere this piece on the stamped card base using double sided foam tape.

Stamp the same image from the Floral mosaics Cling Stamp Set on 3 pieces of white cardstock using Manganese Blue, Leaf Green, Library Green and Monarch Orange Archival inks. Die cut them as shown using the matching dies from Floral mosaics Die. Ink them using the same inks that was used to stamp the images using large oval makeup brush.

Shape the green and orange die cuts using Deluxe flower shaping kit. Adhere all the pieces on the card front as shown using double sided foam tape. Offset the green and orange die cut while adhereing them. Add a few Ivory seashell nuvo drops on the blue die cut on the stamped design. Adhere a few silver rhinestones on the die cuts to add finishing touch.

Other Products: Simon Says Stamp Fog ink, double sided foam tape, large oval makeup brush, black Alcohol marker and silver rhinestones.

Instructions:

My finished card size is 6" x 6". Make card base using Deluxe Flower Shaping Paper and cover with a piece of Sheet 6B of the paper collection. Cut a 5 1/2" x 5 1/2" piece of Sheet 1B of the paper collection and edge with Vivid Chartreuse ink and adhere to card front using dimensional tape. Using a piece of Sheet 6A of the paper collection cut one of the Rounded Window Frame Dies and add Crystal Clear Glitter by adding some of the Dries Clear Adhesive to a piece of a Hydra Sponge. Dab adhesive to piece and sprinkle glitter over it. Set aside to dry. Once dry, adhere to card front using dimensional tape.

Cut a circle using a piece of Sheet 2B of the paper collection. Using dimensional tape, adhere to card front. Stamp the Floral Mosaics image with Magenta Hue ink onto white cardstock then using Vivid Chartreuse ink and a blending brush blend ink into the image. This just gives a gentle shading to the image. Glue this to the light green circle and set aside.

Now we are going to work on our flowers. Stamp the flowers onto Deluxe Flower Shaping Paper using Dandelion ink. Color with Dandelion ink and Vivid Chartreuse ink and cut out with coordinating dies. Stamp the leaves using Leaf Green and then color with Vivid Chartreuse and then edge with Leaf Green to give some shading. Cut out with coordinating dies. Lay leaves and flower petals onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. Once dry, hot glue the flower petals together then add Prills to the centers. Decide on placement and hot glue the flowers and leaves to the card front. Using a Hydra Sponge and some Dries Clear Adhesive, apply Crystal Clear to the flowers. Allow to dry and the card is ready to go.

Other Products: Memento Dandelion Ink, Die Cut Machine, Dimensional Tape, Hot Glue Gun, Misti Stamping Platform, Ink Blending Brush

Instructions:

Card size 5” x 7” on white cardstock (final size). Adhere pattern paper from the Elegant Mosaics Paper Collection HCDP1-2136 using Designer Dries Clear adhesive.

Cut one die from Fancy Classic Rectangle Frame Die HCD2-7384 on white and gold cardstock, adhere both together and adhere using designer dries clear adhesive for outer die and foam tape for inner die. Cut another die from Fancy Classic Oval Frame Die HCD2-7381 on Gold Cardstock, cut it into half and adhere it using designer dries clear adhesive.

Stamp image from Bursting Bloom Mosaics Cling Stamp Set on white cardstock four times using archival ink-carnation red, forget me not, vibrant fuchsia, library green. Cut them with coordinating dies and color them as pictured, assemble them together and add distress dry clear glitter- clear rock candy and adhere it at the center.

From the same stamp set, stamp borders on white cardstock using archival ink-carnation red and plum, cut  with coordinating die and color using archival ink-sunflower. Adhere as shown using foam tape.

Other Products: Big shot plus machine, Distress dry glitter-clear rock candy.

Instructions:

This card measures 6“ x 6“ when completed. Make a tent fold card to 6 “ x 6 “ from the white card stock.

From the Mosaic paper pad collection sheet number 6A and using the outer die from the Courtyard Elegance die set, cut a matting for this card. Adhere this to the card front using the 3D foam tape. From the same die set use the lace patterned die and die cut into a piece of white card stock. Adhere this to the card front applying the adhesive in the circle.

Using white card stock, sepia ink, the misti stamping tool and the ‘Bursting Bloom Mosaic‘ cling stamp set, stamp  the Mosaic circle four times. Using the matching die set, die cut all the elements used to make the layers. Die cut the small flower and the leafy layer from the mosaic circle used for the base. The rest of the layers are cut from the remaining mosaic circles. Color all the elements using the aqua water pens and the water brush-Strawberry, Verdant Green, Parakeet, Carrot, Sunshine, Aqua, Cobalt, Royal Blue, Bright Green Persimmon. Bring shape to all the layers by using the deluxe flower shaping tools. Adhere all to the card front using the double sided 3D foam tape.

For the sentiment, using the sentiment from the Time Piece stamp set and the large circle die set. Choose the die that matches the sentiment to cut the words out in a ring. Die cut 4-5 extra rings from the white card stock then adhere all the layers together. Cut the circle in half so you have the sentiment in two pieces. Trim the flowers away    now adhere to the top and bottom of the mosaic adhered to the card front.

To finish the card apply the diamond stickles to the card front and mosaic as shown.

Other Products: Inks: Strawberry, Verdant Green, Parakeet, Carrot, Sunshine, Aqua, Cobalt, Royal Blue,Bright Green Persimmon. Other: Diamond Stickles, 3D double sided foam tape, Fussy cutting scissors, Misti stamping tool.

Instructions:

Make a slim line card base using Deluxe flower Shaping paper. Cut the paper to size 8” x  8 3/4” and score at 4” on the smaller side to make a  horizontal top folding 4” x 8 3/4" card base. Cut a piece of pattern paper measuring 3 7/8” x 8 5/8”  from the Elegant Mosaic Paper collection and adhere to the card front.

Stamp the image 3 times from the Floral Mosaic stamp set using Jet black ink on Deluxe flower shaping paper. Use a stamp mat to get clear and crisp stamping. Colour the images in same shades using the Zig Real brush pens. Cut the image using the different cutting layer dies from the Floral Mosaic Die set to get three layers of the image. Layer the images together to get a 3D mosaic design.

Stamp the border 4 times from the same Floral Mosaic stamp set in Jet black ink on Deluxe Flower Shaping paper. Colour with Zig markers. Cut with matching die.

Cut the Classic Companion Border die to get two die cuts from the Deluxe Flower shaping paper. Use only the scalloped design of the die cut.

Cut a piece of pattern paper measuring 1 1/4" x 8 1/2"  from the pattern paper. Add a piece of Luxe Gold Card stock at the back as mat layer. Adhere this piece on the card front in the center using foam tape.

Add the stamped and cut border on the strip. Add the Die cut border on the top of the strip tucked on the top .

Add the Floral Mosaic stamped and cut image on the top.

Stamp a sentiment from the Celebrate Love Sentiment stamp set with Jet black ink and add to the card.

Other Products: Die Cutting machine, Scoring Board

Instructions:

Cut the white cardstock into the opening base using the outer frame from HCD1-7367 Simple Centerpiece Die. From the 9B Sweet Magnolia Paper Collection, cut the same frame and vellum border using a combination of 2 frames. Glue both parts to the base, apply a small amount of glue to the vellum only in the corners. From an A4 sheet of printable paper, cut a decorative frame from the Simply Elegant Centerpiece Die Set
HCD1-737 and adhere with a little glue as shown.

Also, stamp the mosaic from the HCPC-3978 Floral Mosaics Cling Stamp Set and the border from the HCPC-3977 Elegant Mosaics Cling Stamp Set using Pebble Beach ink. Cut the layers with matching dies. Color the mosaic with markers or felt-tip pens using blue, beige, pink, yellow and shades of green. Pass 2 layers of border through the center, lay a mosaic on it, place the layers with thin recycled cardboard, and adhere the flower itself with double-sided adhesive tape.

Stamp the sentiment from the HCPC-3975 Oval Floral Frame Cling Stamp Set using the Black Cherry color on the white cardstock and cut it out with the matching die. Attach in the center as shown, applying a small amount of glue.  Add the silver Nuvo drops in the indicated places and it's ready!

Other Products: Cutting machine, trimmer paper, markers or felt-tip pens, printable paper, recycled cardboard, double-sided adhesive tape

Instructions:

Prepare a 5 1/2 x 5 1/2” black card base. Layer a piece of the Gold card stock on top 41/2 x 4 1/2” and top that with another piece of black slightly smaller. Lay a piece of white card stock on top slightly smaller.

On white card stock, stamp the Bursting Blooms Mosaic with Versa Mark and heat emboss with Gold powder.Using the Zig Markers color in the areas shown.

Die cut out with the coordinating dies and place foam dots on the back of each set and assemble together as shown.

To finish add glitter and one black pearl to the center.

Other Products: Paper Trimmer, die cut machine, Versa Mark, Black card stock, Black Pearl,

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of teal designer paper from the Elegant Mosaics Paper Collection, distress with Garden Patina and adhere to card front.

Cut the large die from the Royal Elegance Frames Die in white card stock and adhere, cut the center die in Luxe Gold card stock and adhere with foam tape.

Stamp with the sentiment from the Cheerful Note Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Arrows and Banner Die.

Stamp the Floral Mosaics Cling Stamp Set once in Garden Patina and cut out with largest coordinating die and sponge with same. Stamp once in Vivid Chartreuse, cut out with middle die and sponge with same, and stamp once with embossing ink and heat emboss with gold embossing powder, cut with smallest die and color with Zig marker. Adhere in order with foam tape on each layer.

Stamp the Large and Small Garden Zinnia Cling Stamp Set in Vivid Chartreuse, cut out with coordinating dies and sponge the flowers with the same, sculpt with the 3D Zinnia Shaping Mold and add prills and glitter.

Stamp the Sweet Magnolia Blooms Cling Stamp Set in Lulu Lavender, cut out with coordinating dies and sponge with the same, sculpt with the 3D Magnolia Shaping Mold and add a stamen and glitter.

Stamp the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating dies, sponge with Olive and Lulu Lavender and sculpt with the 3D Leafy Accents Shaping Mold.

Arrange and adhere flowers, leaves and sentiment, as shown in photo.

Other Products: White card stock

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top, using frame die cut from silver paper and place into card using foam strips for dimension. Cut smaller frame from paper collection and silver paper and adhere to the front of the shaped card using Adhesive Foam Strips for dimension.

Stamp Elegant Mosaics Cling Stamp Set on the piece of Vellum Paper with Emboss embossing stamp pad- clear and sprinkle Embossing Enamel - Aged Ivory, heat using heating tool. Place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flowers. Add dries clear adhesive around flower stamen and sprinkle Ribbit Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Floral Butterfly Accents Cling Stamp Set, Large Floral Urn Cling Stamp Set and Clematis Cling Stamp leaves on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Special Birthday Sentiments stamp on the card front with Ranger Archival Ink Pad - Jet Black. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, Emboss embossing stamp pad

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6” Deluxe Flower Shaping Paper at 6” on the long side to create card base. Cut black cardstock 5 3/4 x 5 3/4”, cut dark purple cardstock 5 1/2 x 5 1/2” and cut white cardstock 5 1/4 x 5 /4”. Stamp the ‘Congratulations’ sentiment from the Celebrate Love Sentiments Cling Stamp set on the 5 1/4 x 5 1/4” white cardstock using Archival Jet Black ink, emboss using a simple textured embossing folder and adhere the three mat layers together using dries clear adhesive. Adhere to the card front using dimensional tape.

Cut black cardstock 5 7/8 x 5 7/8” and purple cardstock 5 3/4 x 5 3/4” and adhere to the inside of the card. Partially stamp the Bursting Bloom Mosaics on the right-hand bottom and stamp the sentiment ‘On your special Day’ from the Celebrate Love Sentiments Cling Stamp set on white 5 3/4 x 5 3/4” Deluxe Flower Shaping Paper using Archival Jet Back ink and adhere to the inside.

Using the Bursting Bloom Mosaics Cling Stamp set, stamp on dark purple, light purple, green and dark fuchsia cardstock using VersaMark, cover with Ranger Super Fine Detail Black embossing powder and heat set using the Heat It tool. Use the largest Bursting Bloom Mosaics Die to cut the dark purple stamped image. Use the second largest die to cut the light purple stamped image, Use the third largest to cut the green image and use the smallest die to cut the dark fuchsia floral image. Adhere the diecuts together using dimensional squares and adhere to the card front also using dimension squares.

Other Products: Dark Purple Cardstock, Light Purple Cardstock, Green Cardstock, Dark Fuchsia Cardstock, Ranger Black Super Fine Detail Embossing Powder, VersaMark, Misti, Dimensional Tape, Dimensional Squares, Textured Embossing Folder, Diecutting Machine, Trimmer

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 7 1/2" x 12”, score and fold in half.  Lay the edge of the No.1 die from the HCD2-7326 Ornate Flourish Gateway Die over the fold of the card and die cut to create the shaped base card. Using the No.1 die again die cut the purple pattern paper to cover the front of the card. Die cut two decorative dies using the Nos.1 and 2 dies from the HCD2-7326 Ornate Flourish Gateway Die – one from gold cardstock and one from white cardstock. Adhere the white die over the gold die slightly offsetting them and adhere to the front of the card. 

Die cut three frames using the No. 2 die from the HCD2-7325 Scallop Flourish Gateway Die set and the No. 3 Die from the CD2-7326 Ornate Flourish Gateway Die set out of white cardstock and stack them together. Add Frosting Powder to the frame with spray adhesive. Die cut an inner out of purple cardstock using the No. 3 die from the HCD2-7340 Eyelet Frame Gateway Die and adhere to the back of the inner frame and then adhere to the front of the card. Die cut the inner decorative dies using the top and bottom die from the HCD2-7326 Ornate Flourish Gateway Die and the centre decorative die from the HCD2-7325 Scallop Flourish Gateway Die out of white cardstock and adhere to the inside of the frame.

Stamp four mosaic images from the HCPC-3979 Bursting Bloom Mosaics Cling Stamp Set in clear embossing ink on Iris cardstock and heat emboss with gold embossing powder. Colour the images with Zig Clean Colour Real Brush Markers. Using the four dies from the HCD1-7390 Bursting Bloom Mosaics Die die cut the mosaics out. Add the second layer to the complete image and rotate slightly to create a new image. Add the third and fourth layers as shown.  Adhere to the front of the card as shown with foam tape.

Stamp the edge image from the HCPC-3979 Bursting Bloom Mosaics Cling Stamp Set in clear embossing ink on Iris cardstock and heat emboss with gold embossing powder.  Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die.  Adhere to the bottom of the card as shown using foam tape.

To finish add iridescent gems to the round and edge mosaics.

Inside of Card: Die cut the purple pattern paper using the No. 1 die from the HCD2-7326 Ornate Flourish Gateway Die set and adhere to the inside of the card trimming the left side to allow the card to close.

Die cut two eyelet edge gateway dies using the from the No. 5 die from the HCD2-7340 Eyelet Frame Gateway Die set – one from gold cardstock and one from white cardstock. Adhere to the white die over the gold die offsetting slightly and then adhere to the centre of the inside card. Die cut a plain edge die using the No. 6 die out of purple cardstock and adhere to the centre of the eyelet dies as shown.  Die cut a eyelet edge gateway die using the No. 7 die out of white cardstock and adhere to the centre of the purple cardstock. Stamp the birthday sentiment from the HCPC-3843 Special Birthday Sentiments Cling Stamp Set in embossing ink and heat emboss with gold embossing powder. Die cut the sentiment out using the No. 8 die from the HCD2-7340 Eyelet Frame Gateway Die set and adhere to the centre of the white eyelet frame.

To finish add three iridescent gems under the sentiment.

Other Products: Iris cardstock, foam tape, Hero Arts Embossing & Watermark ink, iridescent gems, spray adhesive

Instructions:

Finished card measures  - 6” x 6 “ when folded. Die cut five largest circles of HCDP1-2136 Elegant Mosaics Paper Collection with HCD1-7272 Rounded Sunlight Window Die, then adhere them to the HCCB1-481 6” x 6” Round Bi-Fold Card base. Stamp four mosaic images of HCPC-3977 Elegant Mosaics Cling Stamp Set HCD1-7388 Elegant Mosaics Die on HCPP1-475 Deluxe Flower Shaping Paper with Archival Ink Pad - Cobalt, then colour them with Memento Dye Ink Pads: Summer Sky and Paris Dusk using HCDA1-449 daubers. Die cut them with matching HCD1-7388 Elegant Mosaics Die and adhere final pieces inside the card.

Die cut larger shape of HCDP1-2136 Elegant Mosaics Paper Collection with HCD1-7370 Simply Elegant Centerpiece Die, add additional layer of white card on the back, then adhere final piece to the card front using 3D foam.Die cut intricate shape of HCDP1-2136 Elegant Mosaics Paper Collection with HCD1-7370 Simply Elegant Centerpiece Die, then adhere it to the card front using Dries Clear glue with metal tip. Stamp sentiment of HCPC-3973 Timepiece Sentiments Cling Stamp Set on the piece of HCDP1-2136 Elegant Mosaics Paper Collection using Memento Dye Ink Pad - Paris Dusk, then die cut it using HCPC-3973 Timepiece Sentiments Cling Stamp Set and adhere final piece to the card front using 3D foam.

Stamp the Peony Leaves from HCPC-3820 Large Sweet Peony Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Bamboo Leaves using HCDA1-449 daubers. Stamp the Peony images from HCPC-3820 Large Sweet Peony Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Dandelion using HCDA1-449 daubers. Die cut the flowers and leaves with matching HCD1-7174 Large Sweet Peony Die, then shape them using fingers and HCST1-401 Deluxe Flower Shaping Kit. Assemble Peony flowers using a hot glue gun, then adhere finished flowers to the card and fill in the composition with leaves. 

As a final touch, adhere ANC825 Ribbit Prills in each of the flower centres.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Memento Dye Ink Pad - Dandelion