Other Products: White Cardstock, cream cardstock, dimensional adhesive, heat embossing tool, hot glue gun, scissors, paper trimmer, die cutting machine, wax paper

To see how to shape the roses watch this tutorial https://www.youtube.com/watch?v=Z8P070kC3oo. For more tips on creating this card, watch this tutorial https://youtu.be/ZuuhGgnasDA.

Instructions: Cut white cardstock to 11 1/4 x 5 1/4" size. Score and fold at 3" and 5 1/4". Die cut the decorative medallion from both of the front flaps of the card opening. Be sure to use wax paper along with the die to make it easier to remove the intricate diecut piece. Cut 2 pink pieces of the Classic Wedding paper to 5 1/2 x 3" size. Use the outline of the medallion die to cut the pink papers lengthwise. Now line up the pink pieces behind the medallions on each side of the card front and attach.

Stamp the Best Wishes in Olive Pastel right through opening onto the inside center of card. Stamp the rose heart twice from the HCPC-3788 Classic Wedding Roses stamp set in Olive Pastel onto white cardstock and diecut with coordinating die. Stamp the roses from the HCPC-3752 Classic Rose in Dark Brown ink onto cream cardstock and diecut with coordinating dies. Use the Stack and Store daubers along with Rose Coral and Olive Pastel ink to color 1 of the rose heart images and a few leaves from the 2nd one. Shape the rose heart and leaves. Cut the few leaves from the 2nd image and attach to the bottom of 1st rose heart. Color the rose petals with Rose Coral ink. Shape rose petals and assemble using hot glue. 

Use dimensional adhesive to attach the rose heart onto the left card flap, aligning so that the Best Wishes shows through the center. Attach roses and leaves onto heart. Use dries clear glue to add the Minnie Pearl prills onto baby's breath. Add Crystal glitter over heart image. Randomly sponge dries clear glue over medallion diecut and sprinkle frosting powder over it. Heat set with embossing tool.

Other Products: White Card Stock, Heat Embossing Tool

Watch this video to see how to die cut intricate dies here.

Watch this video to see how to shape the Roses here.

Instructions: Prepare a card base of 5 1/2 x 7 1/2. Trim a piece of the Classic Rose paper 1/8 inch smaller, distress the edges with the Orchid ink and randomly stamp the Wedding Wishes sentiment around with the White Color Box ink and emboss with the white embossing powder, use heating tool to emboss, adhere to card base. Cut the Decorative Medallions out of white card stock, and using the dauber, lightly color with the Orchid ink. Add glue and the Crystal Clear Powder, set aside to dry. Stamp the Bride and Groom on white card stock using the White Color Box and White embossing powder. Heat image with Heat embossing tool and diecut. Add glue and more of the Crystal clear powder, let dry. Locate the sentiment from the paper collection, cut out and adhere to the bottom of the card.

Stamp the leaves on white card stock with the Dark Brown ink and color with Bamboo Leaves ink. Stamp the Daisies on white card stock with the Brown ink and die cut with coordinating die. Stamp the Small flowers from the Birds and Blooms set on white cardstock with the Brown ink and diecut. Stamp the Roses on white card stock with Colorbox Frost White ink and emboss with Aged Ivory Embossing Enamel, diecut with coordinating die. Lightly color petals with Memento Orchid ink. Shape all the leaves and flowers.  Adhere everything on the card as shown. Add Prills to the center of the flowers, Glitter to the leaves and flowers. Finish by adding Nuvo Crystal Drops to the upper right hand corner.

Other Products:  White Cardstock, Canson Watercolor Paper, Prima Art Stones, Silver Wedding Bands, Hot Glue Gun, Sap Green Archival Ink, Cuttlebug Wildflower Embossing Folder, Clear Rock Candy Distress Crackle Paint.    

You can watch a video on making roses here.

Instructions: My card size is 4 1/4  x 5 1/2".  Make card base and cut out the medallion on the card front. Next I cut a strip of card stock and embossed it with the folder. Glue this down onto the card front. Stamp the dove in black ink onto white cardstock and  diecut with coordinating die. Stamp roses and leaves in Rich Cocoa onto white cardstock and diecut with coordinating dies. Use the daubers along with Pearlescent Coral ink on the roses. Use Bamboo Leaves and New Sprout on the leaves. Shape the dove, flowers and leaves. Paint the edges of the roses with the Crackle Paint and sprinkle the Frosting Powder over them; use the heat gun and set the powder. I also used the Frosting Powder on the Medallion on the card front.  It gives the cardstock a bit more stability. Next I took some of the Art Stones and rubbed them around over the Coral ink pad until the color suited me. I glued them to the center of the smaller flowers. Now glue the dove, leaves and roses to the card front.  I used hot glue to adhere these.  I looped the rings over one of the tendrils of the leaves and then glued the end down to hold them and keep them from slipping off the card front. This lets the rings have movement. Now cut out a sentiment from the paper collection and I colored the edges to match my roses and then glue it down.    

Other Products: White cardstock, dimensional adhesive, hot glue gun, paper trimmer, scissors, diecutting machine, wax paper

To see how to shape the roses watch this tutorial https://www.youtube.com/watch?v=Z8P070kC3oo.

Instructions: Cut card base from white cardstock to 11 x 5 1/2" size. Score and fold at 5 1/2". Cut pink paper from the Classic Wedding collection to 5 1/2 x 5 1/2" size. Cut 6 x 6" card front panel to 5 1/4 x 5 1/4" size. Sponge edges of both panels with Pearlescent Coral ink. Attach pink panel directly onto card base. Use dimensional adhesive to attach card front onto card. Diecut the decorative medallion from white cardstock, leaving a narrow straight edge on the top. Be sure to use wax paper along with the die to make it easier to remove the intricate diecut piece. Sponge the straight edge with Coral ink and attach at an arch onto the card.

Stamp the rose heart from the HCPC-3788 Classic Wedding Roses stamp set in black ink onto white cardstock and diecut with coordinating die. Stamp the roses from HCPC-3752 Classic Rose stamp set in brown ink onto white cardstock and diecut with coordinating dies. Stamp the bridge and groom image from the HCPC-3789 Classic Wedding Bells in black ink onto white cardstock and diecut with coordinating die. Stamp the Congratulations in Coral ink onto white cardstock and diecut with Blushing Rose banner die. 

Use Stack and Store daubers along with Cantaloupe and Coral ink on the roses and rose petals, using a darker shading in the centers. Use Olive and Pistachio ink to color the leaves. Use light touch of Teal Zeal and Toffee Crunch on the groom's tux. Use Coral on bride's dress and bouquet. Use Cantaloupe for bride and groom's hair. Sponge edges of banner with Coral and Cantaloupe ink. 

Shape the roses, leaves and bride and groom. Use a hot glue gun to assemble to roses. Cut apart rose heart image into 2 sections and attach onto card as pictured. Curl up edges of banner and attach onto card. Attach roses. Use dimensional adhesive to attach bride and groom. Use dries clear glue along with Crystal glitter to add sparkle over card as desired. Use the same glue to add Minnie Pearl prills onto baby's breath.

Other Products: Neenah Papers Solar White Cardstock, Silver Foil Cardstock, Ranger Distress Inks (Peeled Paint, Picked Raspberry, Carved Pumpkin), Nuvo Glitter Accents – Fresh Snowfall, Nuvo Jewel Drops – Rosewater, Zig Clean Color Real Brush Markers (Pink, Orange, Green), Versamark, Silver Embossing Powder, Spellbinders Platinum Die Cutting Machine, Rangers Embossing Tool, Scrapbook Adhesive Foam Squares, White Silk Ribbon. 

Watch this video on how to make the Classic Rose here

Instructions: Create a 7 ½” x 6” card base from white cardstock. Cut a 7 ¼” x 5 ¾” piece from silver foil cardstock, adhere to card base. Cut a 7” x 5 ½” piece from Classic Wedding paper collection, adhere to card. Die cut 2 Decorative Medallions from silver foil cardstock, glue to card as pictured. 

Stamp rose heart from Classic Wedding Roses cling stamp set with Versamark and silver embossing powder, heat set with embossing tool. Color rose heart with Real Brush Markers and then die cut with matching die from set. Adhere rose heart to center of card with foam squares.

Stamp multiple rose petals with Classic Rose cling stamp set with distress inks Picked Raspberry and Carved Pumpkin onto white cardstock, die cut with coordinating Classic Rose dies. Stamp leave vines using Peeled Paint ink with Classic Rose Vines cling stamp set, die cut with coordinating Classic Rose Vines dies. 

Color roses and leaves with distress inks and daubers. Shape with Flower Shaping Kit. Layer petals to form roses and then adhere to card. Embellish roses with Nuvo Glitter Accents and Jewel Drops. Make a bow with silk ribbon and glue under flowers. 

Other Products: Cardstock (white, cream), Close To My Heart (watercolour paints, chocolate ink), Gems, Clear Beads, Scrapbook Adhesives by 3L (Glue Pen, EZ Runner Grand, Adhesive Dots, 3D Foam Squares), Paperlicious Crystal Clear, Water Brush

Instructions: To see a larger view of this layout click here. White cardstock is the largest 12x12 layer. I then cut four 1x11.75 strips of the green patterned paper. I then cut each piece with a mitered corner. Adhere these to the white cardstock background, Cut the cream patterned paper to 11x11 and adhere to the layout. I used a small dinner plate to trace my circle onto the pink patterned paper, it just happened to be the perfect size. Adhere to the middle of the layout.

 Stamp and die cut 7 of the small heart wreaths using chocolate ink. Stamp 1 of the wedding bells in chocolate ink and die cut. Stamp and die cut 1 set of the small Classic Rose flowers. I added colour to all of my images using watercolour paints and a water brush. Shape your Classic Rose flowers, watch this video to learn how to shape the roses click here. I added clear beads to the middles of each of my flowers using 3D Crystal Lacquer. Let dry. Using a glue pen, add glue to just the tips of the petals, and sprinkle the Crystal Clear glitter. Let Dry. 

Using 3D foam squares, cut into even smaller pieces I adhered all of the heart wreaths around my pink patterned circle. I started with the top and bottom, then the sides and then the ones in between. I left a space in the bottom right hand corner. Mat your photo in cream and then white cardstock and adhere to the layout using 3D foam squares. Diecut pink cherish tag from paper collecction.  I added 2 small cream patterned flags, the green mini journal block and the pink “Cherish” mini tag to the left hand side of the matted photo. I also added 1 small rose to that area. 

Adhere the Classic Wedding Bell image in the bottom right hand corner section that you had previously left blank. I added a Classic Rose to the top of the bell cluster, and a smaller one just below the bells. I then added gems in between each of the heart wreaths around the layout.

Other Products: Crafters Companion Construction cardstock, SVG Files:Cre8ive Cuts (table), Monica's Creative Room (Gazebo), Die cutting machine, Cricut Explore, Pearls

Instructions: Click here to see a close up view of this gazebo. Cut the gazebo out with the Explore (or other electronic die cutting machine) using the white construction cardstock. Assemble according to the instructions. Cut the decorative pieces from the silver embossed patterned paper and adhere to the gazebo with the Dries Clear Adhesive. 

Cut the table out and assemble according to the instructions. Decorate with pearls a rose and some leaves and adhere to the centre of the gazebo before adding the roof.

 Stamp the small heart image with versamark and emboss with the Aged Ivory Embossing Powder, Heat Set. Colour with the Pearlescent Coral and Bamboo Leaves using the Stack and Store Daubers and die cut using the coordinating die. Trim the hearts to decorate the fretwork above the windows of the gazebo as a garland. Stamp the leaves with versamark and emboss with the Aged Ivory Embossing Powder, Heat set. Sponge the leaves with Bamboo Leaves with the Stack and Store Daubers and die cut using the coordinating die. Shape the leaves using the Deluxe Flower Shaping kit and trim and adhere around the base of the gazebo and the top of the gazebo. 

Stamp the Classic Rose Stamp set onto white cardstock with Pearlescent Coral and colour the images with same ink before die cutting them out. Shape the flowers using the Deluxe Flower Shaping kit and make different sizes. Add Crystal Clear to the roses using Dries Clear Glue. Add around the base of the gazebo as shown and on the top of the gazebo.

 Stamp the dove using Tuxedo Black ink on the construction cardstock and die cut using the coordinating die. Sponge the edges and tail with Summer Sky ink and add Crystal Clear to the tail using Dries Clear glue. Attach the dove to the top of the gazebo with Dries Clear glue and add the pearls around the edges of the roof of both layers.

Other Products: Card Stock: Crafters Companion Whit-hint of gold 300gm, Grey card stock. Ranger: Diamond stickles, Heat Gun, Water Mister, Inking tool, Bone folder, Water coloring brush, Paper distressing tool, Scissors, Ruler. Inks: Archival ink: Black, Sapp green. Distress Inks: Black Soot, Victorian velvet, Faded Denim, Seedless preserves, Iced spruce, Forest moss. Other: Fussy Cutting Scissors, Double sided Tape, 3d Double Sided Foam Tape, Misti, Hot glue gun, Gesso

Instructions: The finished size of this pillow box is 10.5" x 5.5" (26 cm x 14 cm)   

Click HERE to see the video on using the Deluxe Flower Shaping Tool

Click HERE to see the video on making flowers

Make the pillow box pattern and using the design paper found in the collection, make the box base. Follow the photo instructions shown further in this post http://sussipoppins.blogspot.com/.

Taking the grey card stock make the box front matting. Measuring 5" x 10" (12.5 cm x 25 cm ) Taking the pink design papers cut the same only a little smaller. Distress the edges and adhere to the box front. 

Prepare all the embellishments; Stamp and diecut in black ink onto white cardstock the 15 small roses and 4 buds (the roses and buds when completed, apply gesso to them to soften the colour. This can be done before or after adhering to the gift box front. Take into account drying time.), 4 leaf vines in Iced Spruce ink, 2 lace Medallions in grey card stock and 2 in the white card stock. A Botanic Arch from the white card stock, cut a few paper ribbon ends from the pink and natural design paper. Stamp 2 small hearts using the Sapp green ink and colour with the distress inks. Shape images using the Deluxe flower shaping kit. 

Stamp the sentiment then fussy cut it out. Fussy cut the rose image from the design paper. Stamp the bride and groom and the wedding rings image, in black ink and colour with the distress inks. Using black ink stamp, die cut and color the wedding bells border. Start the decorating by first adhering the medallions, botanic arch, ribbon banners and wedding bell border, trimming as you go. Adhere the fussy cut roses. Arrange the leaf vines at the foot and to the left of the arch. Arrange and adhere the roses. Place the heart over the roses. Use the hot glue gun to secure. The sentiment is adhered with foam tape and wet glue over the heart. Yes you will lose a few roses but you need them to support the heart and sentiment. You will see a little of them between the cuts. Cut a heart in half and slip it under the arch as seen in the photo. Make a few extra cuts of the bride and groom image and layer under the stamped bride and groom image to make a 3D chipboard embellishment. Adhere this to the foot of the botanic arch. Stamp, diecut and colour the wedding rings then adhere them in place. Once all is dry and secure apply stickles to finish the decorating. The box will not be so rounded at the front so take this into account when first closing the box.

Other Products: Silhouette Cameo, Die Cutting Machine, Cutting file from Fleurette Bloom, Distress ink Hickory Smoke, Ribbon, Pearl string, hot glue gun, Tacky glue, Grey cardstock 

Instructions: Cut out the file in basic grey card stock glue this together with tacky glue. Repeat this step this time using desired designer paper, with tacky glue adhere this over the grey card stock. Gently glue your Pearl sting over the joins and around the Basket top and bottom using hot glue. Stamp the Wedding Bell Garland with Hickory Smoke Distress ink and die cut using coordinating die. Stamp the Bride and Groom image and the wedding rings using Hickory Smoke. Diecut and colour these with Rose Bud ink and Hickory Smoke ink. Use Dries Clear adhesive on Wedding Rings and Sprinkle with Crystal glitter. Glue these onto center of hot air balloon and add your ribbon to the upright posts.

Other Products: Plain guest book, white pearlised cardstock, 3D foam tape, Foamiran, waterproof black pigment ink, pink pigment ink, dark green alcohol ink, white glitter, floral stamens, hot glue gun, magic glue, rhinestones

Instructions: Take plain guest book and select the designer paper from the Classic Wedding Paper Collection cut to the size of book and place using fast drying glue. Stamp "Two hearts joined in friendship united with love" stamp using black ink. Die cut two Decorative Medallion Die from white pearlised paper and two bottom Medallion Shadow from designer paper collection. Use dimensional adhesive to attach onto book.

To make the pink flowers stamp the flowers from the Large Classic Petunia Cling Stamp Set into white foamiran with black permanent waterproof ink and sponge the stamped images with the pink pigment ink before die cutting with the coordinating die. Use iron or heat gun to shape flower using your fingers, add floral pink stamens. Sponge the petals with clear quick drying liquid glue, sprinkle white glitter. To create leaf, stamp Classic Rose Cling Stamp Set with green alcohol ink into white paper and cut with the coordinating die and sponge the edges of the stamped leaves to create natural shadow.

Arrange the flowers and leaves over Borders and adhere it using hot glue gun. Finally add rhinestones to medallions.

Other Products: Pearl White Metallic Cardstock, Silver Cardstock, VersaMark, Silver Embossing Powder, Encore Ultimate Metallic Silver Ink Pad, Misti, Big Shot, Dimensional Tape

Instructions: Create a 6” x 6” card base with the White Pearl Metallic Cardstock. Cut a silver layer 5 7/8” x 5 7/8”. Trim the wedding bells panel from the paper pad to 5 3/4” x 5 3/4” and ink the edges with the silver ink. Using Dries Clear Adhesive adhere the designer paper to the silver mat and then attach them to the card base with dimensional tape. 

Cut two of the Medallions from white pearl cardstock and add Dries Clear Adhesive to the center of them (don’t glue around the edges) and adhere to the card as shown.  Stamp the bells and the wedding ring with VersaMark and heat emboss with silver embossing powder. Use the Pearlescent Poppy and the Pearlescent Coral to add color to the bells and adhere them to the card with Double Dots. 

Add Dries Clear Adhesive and Rajni Chawla’s Crystal Clear to the diamond on the ring. Glitter the paper and the bells with Crystal Ultrafine Glitter.

Other Products: White Gesso, Texture Paste, Chip Board, Soft Matte Gel, heat gun, twine, Ribbon, FLower Beads, Beads, Dimensional adhesive, Glue Gun, Glossy Accent, scissors, heat tool, Distress inks, ripe persimmon, Picked raspberry, Pine needle, Vintage Photo, Black Archival Black, Pine Needles

Instructions: Cut a chipboard piece to 3.5"x 6". Distress the sides and add white gesso. Cut a paper from the wedding collection paper stack at 1/8th inch less than the chipboard tag. Distress the edge, adhere white gesso to the sides. Cut 2 strips of paper from the paper stack to create the second layer.

For the Wedding Bell. Stamp the wedding bell using black archival ink on a water color paper. Use the picked raspberry and ripe persimmon to color the bells. Use the coordinating die to diecut the wedding bell. Make some tiny filler flowers using the classic rose stamp and die using black ink, diecut with coordinating die. Color and shape them also adding a flower stamen in the center.

Die cut the decorative medallion 5-6 pieces from white card stock. Adhere them all together to create your own chipboard. Use a paper from the collection and die cut one piece from the medallion die and adhere on the top layer. For the composition on the chipboard base adhere all the ready pattern paper. Lay a piece of mesh and then adhere the medallion die and wedding bell on a dimensional foam to raise the effect. Cut a sentiment piece from paper collection and add it at the below. I have also used a cabochon to create an embellishment.

Other Products: White Card Stock, Spellbinders Standard Circle and Scalloped circle, PrismaColor pencils 1097;949;928;927, Corner Rounder

Watch this video on how to cut out intricate dies HERE

Watch this video to see how to shape the Roses HERE

Instructions: Begin by cutting a piece of white card stock 10 x 3 3/4",  score at 3 " round all 4 corners. Cut a piece of the Classic Wedding paper to layer on top at 1/8 " smaller all the way around and round all 4 corners as well. Using the Spellbinders circle die cut in the center of the 3 inch part and layer a scalloped circle on top that you cut out with white card stock. Cut the Medallion out of white card stock and adhere to the lower part of the tag. Use the Luggage and Tag dies and cut the 2 sentiment tags out. Use D-Dots and adhere to tag as shown. Stamp the Wedding Bells on white cardstock with the Dark Brown ink, color with the pencils and add D-Dots, adhere to tag. Stamp the Roses on white card stock with White Color Box ink and emboss with the Aged Ivory, lightly rub some Orchid ink over, cut out, shape and adhere to card. To finish the tag add some Crystal clear powder on the leaves and Bell.

Other Products: White chipboard, smooth white cardstock, Distress Ink Pumice Stone, Sticky Adhesive Sheet, Spellbinder's Classic Circle die, Funnel Tray, Zig Clean Clear Brush Markers, Archival Ink, Plum, Library Green, Olive Green and Fern Green, Twine, Fancy Beads, Hot Glue, Flower Pollons.

For shaping roses and leaves, refer to Emma Lou's video https://www.youtube.com/watch?v=Z8P070kC3oo

Instructions: Click here to see a close up view of this project. I have stamped the rose images with Archival Plum and used Color Box Harvest and Dark Peony to color my roses using the Stack and Store Daubers. The leaves are stamped with Library Green and colored using Fern Green and Olive Green. The flowers and leaves are then dressed up using Frosting Powder and Crystal Clear. 

For the panel I have cut a thick white chipboard measuring 4 1/2 " by 7 1/2". Cut designer paper a little smaller than the chipboard and distress the edges using Pumice Stone. Mat it on the chipboard using any glue that dries clear. For top and bottom panel cut 4 pieces of Decorative Medallion Die and adhere 2 intricate medallion die cuts together to create the top and bottom panels. Attach the medallion shadow white base underneath both the panels. Cut a rectangular orange panel using Cut Mat Create 1B die from the designer paper and layer it in the center. Cut another square panel using Cut Mat Create 2A die and mat it on a thick white cardstock. Layer it on the right edge of the main panel as shown. Choose a picture, die cut it and adhere it to the square panel. I have used a wedding picture of Ellen and her husband. Diecut 8 Delicate Flourish using Cut Mat Create 2A dies, on white cardstock. Adhere 4 Delicate flourish diecuts together to create one thick Delicate flourish. Repeat this with the remaining 4 diecuts. Attach one on the right and one on the left of piece as shown in photo.

 Attach double sided adhesive onto white cardstock and die cut circle using Spellbinder's Classic Circle Die. Remove the release paper and add Crystal Clear Powder to adhesive side of circle. Rub Crystal Clear powder with your fingers  to assure entire circle is covered in sparkles. For the Rose Adorned Wedding Bells, I have stamped the image with Black Archival ink on smooth white card stock and colored them using Zig Clean Clear Brush Markers. Diecut 2 more bell die cuts and attach them directly on top of each other to create a thicker bell image. The Wedding Bells image are attached onto the circle with foam tape. Stamp Wedding Bell Garland in Archival Black ink and diecut with coordinating die, color with Zig Clean Clear Brush Markers. Diecut Cherish sentiment from paper pad. Stamp and diecut desired amount of Wildwood Mini Blossoms on white cardstock and sponge flowers in various colors to your liking, and shape using the Deluxe Flower Shaping Kit.

Once all the elements are ready, decorate the panel as shown. I added flower pollons to the center of small flowers and larger pollons through out to embellish. Long beaded danglers are added from the back and adhered using hot glue to add extra beauty to the project. To finish the project add a loop on the top and add a sentiment from the paper collection.

Other Products: Paper: Neenah Solar White, Recollections White, Black; Ink: VersaFine Onyx Black; Accessories: half pearls, Clear Wink of Stella, Scrollwork Embossing Folder (Cuttlebug), mineral spirits, paper stumps, Prismacolor Pencils: Metallic Silver, Black, Deco Pink, Hot Pink, Processed Red, Black Cherry, Cool Greys 10, 20, 30%, Cream, Jasmine, Yellow Ochre, Goldenrod, Chocolate, Light Peach, Pink Rose, Kelp Green, Marine Green, Scotch Mounting Tape

Instructions: Card measures 4 7/16" x 5 11/16". Cut white cardstock 5 11/16" x 8 7/8", score at 4 7/16" and fold to make card base. Cut April Lovely cardstock 4 7/16" x 5 11/16" and glue to card base. Cut black cardstock 4 1/4" x 5 1/2" and add to card base with Designer Dries Clear Glue. Cut white cardstock 4 1/16" x 5 5/16", emboss with Scrollwork Embossing Folder, stamp sentiment from Classic Wedding Wishes Set as pictured and glue to black mat.

Stamp bell and bride and groom images from Classic Wedding Bells Set on Solar White with Onyx Black Ink. Color with pencils and mineral spirits using paper stumps. Die cut image using matching dies from Classic Wedding Bells Die Set. Add as pictured using Scotch Mounting Tape. Add Clear Wink of Stella to images as desired, then add Shell White Glitter. Add adhesive pearls to top right of card.

Other Products: Forest Moss Distress Ink, Iced Spruce, Worn Lipstick & Peeled Paint Distress Oxide Inks, Versamark Ink, Ranger Platinum Embossing Powder, Ranger Heat-it Tool, Koi waterbrush, Ebosser, Martha Stewart scoreboard, white & watercolor cardstock, pearls & adhesive.

Instructions: Take a 5 3/4" x 5 3/4" piece of white cardstock & ink the edges with Forest Moss Distress Ink. Adhere it on a 6" x 6" card base. Adhere a 5 1/2" x 5 1/2" pattern paper from Classic Wedding Paper Collection on the card front.

Diecut 2 Decorative Medallions on white cardstock and a border using Delicate Border Basics Die & Classic Border Basics Dies together. Ink these with Forest Moss Distress Ink and adhere them on the card front as shown. 

Stamp the bells image with versamark ink on a piece of watercolor cardstock & heat emboss using Ranger Platinum Embossing Powder & Heat-it tool. Color it using Iced Spruce, Worn Lipstick & Peeled Paint Distress Oxide Inks & Koi waterbrush. Die cut 4 more pieces with the same die. Stack and glue them below the colored piece. Adhere it on the Decorative Medallion die cuts as shown. 

Stamp the flowers & leaves from Small Classic Petunia Cling Stamp Set & Large Classic Petunia Cling Stamp Set using Versamark ink & Aged Ivory Embossing Enamel. Heat emboss using anger Heat-it Tool &  Die cut them using Coordinating Dies. Use the Stack and Store Daubers, Worn Lipstick & Peeled Paint Distress Oxide Inks to color the flower & leaves. Shape them using Deluxe Flower Shaping Kit. Add a little Ribbit Prills from Bright Ideas collection to the flower centers. Decorate the card with the flowers & leaves as shown. Add some pearls to the die cuts to add finishing touch to the card.

Other Products: Archival ink- orange blossom and Sepia  Cream cardstock, Versamark

How to shape classic rose, check here

On tips of how to diecut intricate dies, check here

Instructions: Money Envelope size is 7.125” x 4” after fold, (full size is 7.125” x 10.875”). For top fold, layer it with classic pattern paper and distress the edges using Orange Blossom ink. Diecut Classic Border Basics decorative die along with the basic border edge die on cream cardstock to create the border. Repeat this using outline of decorative border along with basic edge die to create the shadow background of border. Attach together using dries clear glue. Attach Decorative border onto Folded card front. Diecut Medallion die onto cream cardstock and accent with Rajni’s crystal clear powder. Stamp Roses using Orange Blosson ink and diecut using coordinating die. Shape the rose as shown in video. Add Dries Clear glue onto flowers as desired and sprinkle it with Rajni’s crystal clear. Stamp Doves in Archival Sepia ink and diecut with coordinating die. Apply versamark ink to doves and sprinkle Rajni’s crystal clear powder on it. Embellish the card with some messages fussy cut from the Classic Wedding Paper Pad. Add patterned paper of your choice on the inside of card.

Other Products: Inks:  VersaMark Watermark ink, Distress ink (bundled sage, ripe persimmon)  Image Colored With:  Spectrum Noir markers (IG1, IG3, CR1, FS7, GD1, DG3) Copic Sketch (YG63)  Paper:  Bazzill Cardstock (White), Cardstock 65lb. Smooth (White), 89lb. AW Curious Iridescent Cryogen white cardstock  Accessories:  Ranger Super fine detail embossing powder (silver), Silver ribbon, Silver adhesive pearls, flower stamen, white lace, foam dots, MISTI

Instructions: Finished size of card is 5 1/2” x 5 1/2”. Cut a piece of white cardstock 5 1/2” x 8 1/5”, score at 5 1/2” and fold, place decorative medallion die on 3” section and diecut, cut a second decorative medallion shape. Cut a 5 1/2” square piece of vellum, glue to the back of the folded decorative medallion, glue second decorative medallion as pictured. Cut a card front panel from the patterned paper, stamp sentiment with watermark ink and heat emboss with silver embossing powder, ink edges with bundled sage ink, glue to inside of card as pictured. Stamp Wedding Bells 3 times on white cardstock with VersaMark ink and heat emboss with silver embossing powder, cut with coordinating die, color with markers, base image is complete, second image keep center bell and ribbons only, third layer-ribbon bow only, glue layers with foam dots for dimension. Cut an additional bell shape from white cardstock (no need to stamp), glue to back of dimensional bell image, glue to center of front of card as pictured. Stamp Classic Rose flowers on white cardstock with black ink, cut with coordinating dies, color with ripe persimmon ink.  Stamp one leafy swirl on white cardstock with black ink, cut with coordinating die, color with bundled sage ink.  Shape and glue roses together. Shape leafy swirl. Stamp Wildwood flowers on white cardstock with cantaloupe ink, cut with coordinating die, shape small flowers and add a stamen. Wrap silver ribbon around front panel of card and glue down as pictured. Glue white lace trim to edge of ribbon. Glue silver mini adhesive pearls as pictured. Glue leaves, roses and flowers as pictured. Add Crystal Clear glitter to the roses and the rose images on the patterned paper.

Other Products: Distress Ink: Pumice Stone, Spiced Marmalade, Liquitex White Gesso, Prima Resin Embellishment, Westcott Brand Trimmer & Scissors, Craft Knife, Craft File, Stamen, Gyspsy Soul Lasercut Balloon

Watch tutorial in the link to see how to shape the rose: http://bit.ly/2rhcYif

Instructions: Take your classic wedding paper collection and cover your chipboard hot air balloon. Use your craft knife to carefully cut the paper to size. Once done use your distress ink in pumice stone and add color to the outisde frame of the hot air balloon to add some depth. Now you will use your classic wedding roses stamp and stamp a total of 6 flowers: 4 large and 2 medium in Spice Marmalade ink onto the Classic Wedding paper and diecut. Each complete rose will have 2 large stamped roses and 1 medium size rose. Shape roses. Be sure to stagger each layer this allows the flowers to have a nice full look and add your stamens. Next add your Scrapiniec wedding embellishments to the front of the completed classic wedding hot air balloon.

Other Products: Paper trimmer, string of pearls, white plastic wheels and Stampin Up ink in Rose Red, Smoky Slate and Garden Green, lollipop sticks 

To see a close up view of this train click here

Watch this video  https://youtu.be/Z8P070kC3oo to learn how to shape the classic roses.

Click on each diagram to see a cutting guide for each train car: Train Engine Part 1, Train Engine Part 2, Dove Train and Flower Basket Train, Train Caboose

Train Caboose: Cut a piece of cardstock 11 inches by 12 inches for train caboose. With 12 inches edge of cardstock at the top of the scoring board, score at 4 inches and 8 inches. With 11 inches edge of cardstock at the top of the scoring board, score at 4 inches and 7 inches. Refer to train caboose diagram for scoring, cutting and gluing placement. Fold train caboose into a box. Secure tabs with glue. Cut classic wedding decorative paper to cover train caboose. Cut two classic wedding decorative pieces of paper at  3 7/8 inches by 3 7/8 inches and two pieces of decorative paper at 2 7/8 inches by 3 7/8 inches. Cover train caboose. Stamp and die cut wedding couple, rings, and two heart rose wreaths with Heartfelt Creations Classic Wedding and Classic Wedding Bells Cling Stamp sets and die sets. Color with Garden Green, Rose Red and Smoky Slate ink markers. Attach completed die cuts to train caboose. Refer to picture for placement. Cut a piece of cardstock 5 1/8 inches by 6 1/8 inches for train caboose cover. Score cardstock piece at 1 inch on all four sides. Refer to train caboose cover diagram for scoring, cutting and gluing placement. Cut a 3 7/8 inches by 2 7/8 inches classic wedding decorative paper for top of train caboose cover. Die cut Heartfelt Creations  Medallions from classic wedding decorative paper and attach to both long sides of caboose cover. Attach wheels to train engine. Refer to picture for placement. Stamp and die cut four roses for wheels using Heartfelt Creations Classic Rose Cling Stamp Set and Classic Rose Die. Color with Red Rose and sponge dauber and shape flowers. Add crystal glitter to roses and place at center of wheels. Add crystal glitter to roses and place at center of wheels.

Dove Train Car: Cut two pieces of cardstock 7 inches by 8 inches.With the 8 inches edge of cardstock at the top of the scoring board, score at 1 inch, 2 inches, 6 inches and 7 inches marks. With the 7 inches edge of cardstock at the top of the scoring board, score at 1 inch 2 inches, 5 inches and 6 inches marks. Refer to dove train car diagram for scoring, cutting and gluing placement. Fold dove train car into a box. Secure tabs with glue. Cut classic wedding decorative paper to cover dove train base and top. Cut three pieces of classic wedding decorative paper at 2 7/8 inches by 3 7/8 inches. Cover dove train car. Cut classic wedding decorative paper to cover sides of dove train car two at 3 7/8 by 7/8 inch and  two at 2 7/8 by 7/8 inch. Stamp and die cut 6 doves with the Heartfelt Creations Flowering Dogwood and Doves Cling Stamp set and Flowering Dogwood and Doves Die. Attach the doves to clear cardstock and place in the dove train per picture. Cut 6 lollipop sticks to four inches for the cage bars and place per picture of the dove train car. Attach wheels to train engine. Refer to picture for placement. Stamp and die cut 4 roses and 4 leaves for wheels using Heartfelt Creations Classic Rose Cling Stamp Set and Classic Rose Die. Color with rose red and a sponge dauber and shape flowers. Color leaves with garden green. Add crystal glitter to roses and leaves and place at center of wheels.

Flower Basket Train Car: Cut one piece of cardstock 7 inches by 8 inches. With the 8 inches edge of cardstock at the top of the scoring board, score at 1 inch, 2 inches, 6 inches and 7 inches marks.With the 7 inches edge of cardstock at the top of the scoring board, score at 1 inch 2 inches, 5 inches and 6 inches marks.

The base of the flower basket train car is scored, cut and glued identical to the dove train car and turned upside down to form a base for the flower basket. Decorate the base with classic wedding decorative paper. Cut the flower basket from cardstock and/or decorative paper as desired per directions for the flower basket here except make one handle for the middle rather than two handles. Decorate the basket with classic wedding decorative paper. Attach wheels to train engine. Refer to picture for placement. Stamp and die cut 4 roses for wheels and 8 roses for flower basket and three sets of leaves for flower basket using Heartfelt Creations Classic Rose Cling Stamp Set and Classic Rose Die. Color with rose red and a sponge dauber and shape flowers. Add crystal glitter to roses and place at center of wheels and in flower basket.

Other supplies:  Spellbinders Standard Circles Large and Small, London Fog Memento Ink, White and Green Cardstock, Canson Watercolor Paper, Crystal Clear Micro beads, Rock Candy Crackle Paint

Watch this video  here on how to make the Classic Rose

Watch this video here on how to shape the classic Rose

Instructions: My card is 6 x 6".  Make card base and cover with one of the card fronts. I used the Spellbinders dies to make a frame to bring attention to the center image.  Next I stamped, cut out, colored and shaped the flowers, doves, and wedding rings (The dove and rings are stamped in Tuxedo Black Memento Ink and the flowers are stamped in Rich Cocoa Memento Ink)(The roses were colored in Rose Coral ink). I added glitter to the dove and the plumes and then glued it down onto the card front.  Next I painted the crackle paint and sprinkled the Frosting Powder on the edges of the rose petals and glued them down.  Now cut out one of the sentiments from the paper collection and glue it to the lower left hand corner of the card.  I added the micro beads to the wedding ring set and allowed that to dry and then I glued it to the corner of the sentiment.  A very quick and easy card.

Other Products: Spellbinders Circles - LG Die; Memento Dye Ink Pad - Dandelion; ColorBox Chalk Ink - Gray Whale; Brilliance Ink - Platinum Planet, Starlite Silver and Pearlescent Rust; VersaMagic Chalk Ink - Pink Grapefruit; Want2Scrap 72 Count - Silver/Clear Rhinestones; Want2Scrap 6" Sleek Strips Rhinestones - Clear; Queen & Co. Peach Glitter Washi Tape; Art Glitter Ultrafine Transparent Glitter - Antique White, Salmon and Angel Dust

Instructions: Begin by creating an 6" X 6" card out of White Cardstock. Next cut an 6" x 6" card front from the Classic Wedding Paper Collection and die cut the center using the Spellbinders Classic Circles Die. Sponge edge of Classic Wedding card front with Gray Whale Ink and then adhere to the card base with pop dots. Adhere die cut circle directly to the card base with Dries Clear Adhesive.

Die cut white cardstock using the die from the Decorative Medallion Die and lightly sponge die cut with Pink Grapefruit Ink and then with Dries Clear Adhesive and the Fine Metal Tip add Antique White Glitter to the die cut. Adhere Decorative Medallion die cut to the card as shown with Dries Clear Adhesive. Add Peach Glitter Washi Tape and the Silver Rhinestone Strip to the side of die cut, cutting to fit as necessary. Adhere a Silver Rhinestone in the upper right hand corner of the card as shown.

On White Cardstock with Tuxedo Black Ink stamp the rose petals using the Classic Rose Cling Stamp Set, stamp the leaf image from the Classic Rose Vines Stamp Set, stamp the large heart shaped rose bouquet image from the Classic Wedding Rose Stamp Set and stamp the dove from the Flowering Dogwood and Doves Stamp Set. Die cut all with coordinating dies. Using Stack and Store Daubers color leaves with Olive Grove and Pistachio Memento Ink and then add Pearlescent Olive Brilliance Ink. Using Stack and Store Daubers color the rose petals with Pink Grapefruit VersaMagic Chalk Ink and then add Pearlescent Rust Brilliance Ink to the centers of the petals. Color the dove with Platinum Planet and Starlite Silver Brilliance Ink and using a Fantastix add Dandelion Memento Ink to the dove's beak and feet. Using the same ink colors for the roses and leaves, color the large heart shaped rose bouquet. Shape leaves, roses, heart shaped bouquet and dove with Deluxe Flower Shaping Kit. Cut the large heart shaped rose bouquet as needed (saving other pieces to use on other cards) and assemble all as shown.

Adhere all to card with Dries Clear Adhesive and pop dots as needed. With Dries Clear Adhesive add Salmon Glitter to the die cut roses and to the roses on the design paper, add Angel Dust Glitter to the dove and add Minnie Pearl Prills to the baby's breathe on the die cut image and design paper.

Other Products: Vellum, Ribbon, Pearls on a string, Versafine black, Bling on a roll, Label Nestabilities, Decor sticker, Pearl pen salmon, Silver cardstock, Flatback pearls, white brads, ball chain, Key hanger, Charm, Glue gun, Fine marker black, Template shoe Viva, White Cardstock, SVGCuts (purse), gesso, Silhouette Cameo.

Click here to watch a video on vellum roses

Instructions: To see a close up view of this project click  here . Cut out the SVG file of the purse with white, Silver cardstock, and Designer paper and put it together like the instructions say. I decorated the sides with an embossing folder to give it some texture. Now you can decorate the purse with a ball chain, charms and a label. 

For the shoe I traced the pattern of the template on white cardstock and designer paper, glue everything together following the instructions. Now cut 2 medallions out of white cardstock, 1 for the back and 1 for the front of the shoe. Glue some bling of the roll on the edge of the shoe all the way round. Make a bow and glue it on the front of the shoe, with some pearls on a string, stick the decor sticker in front of the bow.

Now you can stamp some roses and leaves on vellum, color, die cut and shape them and put them on top of the shoe on the front. I also made some tiny flowers, I used 1 layer of the smallest rose I put some white gesso on the back and I glued them also on the front, then I cut out a label with a spellbinders die and with a black marker I put the number (size) on it and some tiny dots and glued it inside the shoe now your shoe is ready!

Other Products: White card stock 280 gsm, Vellum, Archival Inks- Jet Black, Tea Rose, Plum,  saffron, Library green, leaf green, broken china, Distress inks-Worn Lipstick, charms-lock and key, pearls, 1/4 inch peach organza ribbon, score board, zig markers-light orange, peach and green, 3d foam tape, artificial wire pollens, Spellbinders Oval Dies-small

Watch this video on how to make the Classic Rose

Instructions: This is an easel card and has the look of a book in front. Cut a card base from white card stock 6"x 12" and score and fold at 3" and 6". (the 6x6" side is the bottom of the card). Cut a Designer paper 6x6" and adhere directly onto bottom of the card base. Cut white cardstock to 5 3/4" x 5" and diecut a curve using the Simple Fleur die along the 5" side of the paper. Score this white cardstock on your score board every 1/8", until the entire paper has textured lines all over it. Distress with worn lipstick. Now diecut a border from the Fleur Border Basics Die on white cardstock and adhere to the back of the textured cardstock. Using 3d foam tape, adhere this textured panel onto the card base. Cut 2 strips from designer paper of your choice at 2 7/8" x 5 7/8" and adhere to top of card base.

Card Front (Book Base): Cut a white cardstock to 5 1/2" x 7 3/4", score and fold at 3 3/4" and 3 7/8". Ink the edges in desired colors. Cut two A2 card panels side by side from the pattern paper and fold in the center, glue onto book base, applying glue only to the score line (this is your first page). Add one more layer by cutting two more A2 card panels and glue to the previous book page. Now glue corners of pages down to create curved pages.

Adhere the book with 3D foamtape on the card front. Diecut a white oval frame using white cardstock and two oval dies. Diecut Rectangle frame using whtie cardstock and Cut Mat Create 1A and Cut Mat Create 1B. Cover oval frame and rectangle frame in dries clear glue and sprinkle Krystallos onto frame. On vellum stamp the "Wedding Wishes" sentiment with Jet black ink. Adhere on the book using a dries clear glue. Cut a medallion die along with the shadow base in white card stock. Distress the base with worn lipstick ink. Adhere medallion die on the medallion base. Add this to the top of the book.

Stamp the classic rose in tea rose and saffron and plum colour. Cut with coordinating die. Colour with tea rose and saffron and shape the roses using the flower shaping tool kit. Follow the video for making the flowers.

Make filler flowers from the smallest classic rose using green colour. Add wire pollen. Stamp the doves and cut with coordinating die. Colour lightly with blue ink. Stamp the rose heart image, wedding rings and leaves on white cardstock using jet black ink and colour with zig markers. Cut with coordinating die.

Arrange all the flowers and leaves along with the rose heart and doves as shown on the card with hot glue gun.

Mat a sentiment of your choice from the paper collection, on white cardstock and attack to book. Add the ribbon bow along with the charms and pearls. Using Dries Clear Glue to add Krystallos as desired on project. Using same glue add Minnie Pearl Prills to flower pollons.

Finally attach book base to 3" edge of card base.

Other products: Paper Mache round boxes, large pearls, rhinestones, lace, cording, paint, acetate, tulle, ribbon, chipboard for cake "plate", Copic Marker BV20, Bazzill inks -Light Green, Adirondack Lights-Salmon

Watch this this video on how to shape the Classic Roses

Instructions: Overall size is 7" base x 8" tall, plus topper 3 1/2". Start by painting 3 round boxes with white acrylic paint or gesso. I used a cereal bowl to draw around for my cake "plate" and cut it out with a craft knife.  Paint it white as well. Cover each box with designer paper from the Wedding Collection and then die cut several Decorative Medallions in white cardstock to add as a scallop around all 3 boxes and glue them on to the boxes on top of the decorative paper. Glue the lids to the boxes and stack them, gluing each on top of the other. Glue lace around the lid of each box and cording around the base of each box.

Stamp, die cut and sponge all the rose pieces using salmon ink on white cardstock. Stamp vine/leaf pieces in Bazz-Inks light green, color using New Sprout and Bamboo Leaves ink, then shape using the Deluxe Flower Shaping Kit.  Craft each flower and then use glue and glitter around the petals of each flower. Begin decorating the cake with the vines/leaves, first working in a slight diagonal direction toward the top. Once you are happy with the pattern you've made, add the roses starting with the largest at the bottom of the cake. Fill in where needed with white tulle and peach ribbon bows, also add more leaves where needed.

To make the topper I cut a round piece of designer paper for the top and set aside.  I stamped the doves and the small heart wreath from Classic Wedding Roses in black ink, then die cut them with coordinating die and colored with Copic Markers.  I cut a strip of acetate and put a fold at the bottom (the form an "L" shape).  I cut a slit in my round paper and inserted the acetate then glued the paper, with the acetate sticking out, to the top of the cake.  I glued the heart wreath to the acetate and then glued the doves to the wreath.  I finished by adding large pearls to the edge of the top all the way around.

Other Products: White Card Stock, Spellbinders Labels Twenty-Eight, Archival Tea Rose Ink, Archival Watering Can Ink, Dove Blending Pen, Versamark, Peeled Paint Distressed Ink, Gold Embossing Powder and die cutting machine.

Instructions: To begin take a 12"x 12" sheet of cardstock and cut off 4" from the 12"x 12" sheet of cardstock so that you'll have a 4"x 12" and an 8"x 12" sheet. Cut the 4"x 12" sheet into three (3) equal 4"x 4" panels. Now move on to the 8"x 12" sheet.  With the 8" top of the paper across the scoreboard, score at 4" (the middle of the sheet).  Turn the sheet so that the 12" top is across the scoreboard and score at 4" and 8". Now, you'll cut along the 4" and 8" scorelines but only down to the center scoreline. These 3 cut sections will be for your card panels. 

At this time you must decide what direction you want your cards to go to (to twist).  Depending on the folds, your cards can face right, left, or forward.  For the card on my tutorial, I have the 2 end sections twisted to the middle of the card and the center section straight. Starting with the left side, take the corner where you cut on the 4" line and fold it downward in a triangular shape (in half) with the top corners meeting the outside bottom edge corners of the base panel and along the center scoreline.  Repeat this for the other side but in reverse.  Instead of folding to the left you will fold to the right. Finally the center panel is simply folded downward (in half) to the center scoreline. Once your folds are make use your bone folder to get a nice sharp line. Take one 4" x 4" panel and evenly align the edge of the card to the edge of the base panel, making sure the bottom of the card is also aligned with the center scoreline. You will be gluing the panels to folds that you have just make to allow the cards to easel. I always practice with a piece of scrap paper to ensure that I have my folds the way I want. Just to change things up a bit for the center panel I used a 4" x 6" panel so the center section stood out a but more. Finishing by covering in decorative paper from the Classic Wedding Paper Collection and don't forget to add your flowers! 

The flowers were stamped on white card stock with Tea Rose Ink and die cut with the matching die before distressing with Tea Rose Ink and finally shaping with the Flower Shaping tool.  The wedding bell image was stamped on white card stock with Watering Can Ink and die cut with the matching die before coloring using a Dove blender pen and a combination of Tea Rose and Peeled Paint inks. The sentiments were stamped on White card stock with Watering Can Ink and die cut with Labels Twenty-Eight before distressing with a combination of Tea Rose and Peeled Paint inks. The dove image was stamped on white card stock with Versamark and heat embossed with Gold Embossing Powder before die cutting with the matching die.

Other Products: Canson Water Color Paper; Glue Gloss; Distress Marker in Pumice Stone; Tattered Rose. Distress Inks Peeled Paint; Tattered Rose; Wild Honey; Vintage Photo; Foam Adhesive; Blank Cover book Binding Kit

Watch this Video on how to create the Classic Rose here

Instructions: Cover front and back of the chipboard from the book binding kit with papers from Collection. Then bind the book following instructions in the book binding kit. Add additional papers from collection to the cover making sure you 

distress edges to add detail. I used a 6x6" card  panel for my top layer and distressed the edges on this too. Cut rectangle from Silver foil paper from Classic Wedding paper pad and distress edges. Adhere this on the cover. 

Die cut the Decorative Medallion out twice along with the shadow and adhere together. Using Glue gloss add a coat to each die cut medallion and then sprinkle with crystal clear powder. I used white cardstock and vintage Photo ink to stamp the images. Stamp and cut Classic Rose out four times with small set and two each of large diecut with coordinating die. Stamp and die cut four sets of the classic rose vine. Color and mold the roses as shown in Emma Lou's Video. Stamp bells and die cut. Color the leaves and bells.

Begin to add details to project by attaching a Medallion Die to a 6x6 from paper collection on side of panel as shown in project. Then add second medallion die to top of 6x6 panel, this will be the base for all the detail of the roses, leaves and bells. Detail with crystal clear. Add pollens to smaller flowers for added detail. 

Other Products: Mdf Wedding Bell, Pearl String, Impress Dye Ink Old Rose, Distress Ink Hickory smoke, Coloured Pencils, Ribbon, Dove Blender Pen, Silver Embossing Powders, Glue Gun, White cardstock, Metallic Silver cardstock

Instructions: Draw around the inside of your Mdf Wedding bell with you choice of paper Classic Wedding Paper Collection. Take your Mdf Wedding bell and cover all visible sides with Versa Ink then add Silver Embossing Powder. Heat Set. Glue the paper that we just drew around and glue this onto inside of bell.

Stamp 2 Rose Cascade images in Guacamole ink onto white cardstock and diecut. Colour using coloured pencils. Stamp 2 more Rose Cascade image this time in Old Rose ink. Colour Roses with Dove Blender using Old Rose ink and fussy cut the roses out. Glue the fussy cut roses onto the previous Rose Cascade images. Stamp Classic Rose Die with Old Rose ink onto white cardstock and diecut. Colour with Old Rose Impress Ink pad. Shape these with your Deluxe Flower Shaping Kit, assemble flower and attach onto top of your bell with hot glue gun.

Stamp bride and groom using Hickory Smoke Ink and diecut with coordinating die. Colour using Old Rose and Hickory smoke using the Dove Blender Pen, and coloured pencils. Shape using Deluxe Flower Shaping Kit then attach to bell using hot glue. Choose your sentiment and mat it in metallic silver cardstock, add to project. Finally add pearl string around the outside of your bell. 

Other Products: Grey cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers (C0, C1, C3, C5, W3, W1, W0, BV0000, BV00, BV01, BV04, BV08, BV13),  Crackle Paste, Heidi Swapp Dots and Hearts stencil, palate knife, pearls, Detail Black Embossing Powder, heat tool, double sided tape, double sided mounting tape Versamark.

Instructions: Create a top folding card base at 11 inches x 5 1/2 inches.  Score and fold at 5 1/2 inches.  Cut base layer from grey cardstock at 5 1/4 inches x 5 1/4 inches. Select the silver-grey designer paper from the Classic Wedding Collection and cut at 5 x 5 inches. Stamp sentiment on base of the designer paper with Versamark ink and apply Detail Black Embossing Powder and heat set. Apply dots and hearts from the Heidi Swapp stencil and crackle paste on the designer paper. Sprinkle with Frosting Powder and heat set. Die cut Medallion on gray cardstock using Decorative Medallion Die. Attach all the layers of the card and Medallion die cut onto card base. 

Stamp the Wedding Bells image on X-Press It Blending Cardstock using LuLu Lavender Ink and diecut with coordinating die. Color the image with Comic Alcohol Ink Markers (Bells - C0, C1, C3, C5, BV00, W3, W1, W0, Ribbon - BV0000, BV00, BV01, BV04, BV08, BV13, Leaves - C0, C1, C3, BV00). Cut 3-4 additional bell images on grey cardstock and adhere the bell layers with double sided mounting tape in-between layers to create a 3D image. Adhere the bell image. Apply Designer Dries Clear Adhesive around the bell image base and coat with Silver Gala glitz. Apply pearls for embellishment.