Other Products: Versamagic perfect plumeria, foam tape, ranger gold embossing powder, steadler watercolor pencils, versamark watermark stamp pad.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

Instructions: Create a card base of size 5 1/2” by 7 1/2” and ma it with pattern papers from the sweet peony paper collection. Cut the large window frame from the rounded window frame die set using luxe gold cardstock. Use a circle die from the eyelet circle and basics small die set and cut a round piece of pattern paper. Adhere the pattern paper in the center of the rounded frame. Cut the round frame in half making a semicircle. Adhere the two half pieces of the rounded frame on the card as shown.

Stamp the images from the peony bud and Blossoms stamp set using versamark watermark ink and heat emboss in gold. Color the images using steadler watercolor pencils and cut them using their coordinating dies.

Stamp the Peonies from the large peony stamp set using archival rose madder and color using the same ink. Stamp the leaves with archival fern green and color using memento bamboo leaves. Stamp the smallest flowers from the small sweet peony stamp set with archival fern green and versamagic perfect plumeria, lightly color the petals using the same inks. Cut the flowers and leaves using their coordinating dies and shape them using the groove golf tools. Add the rock candy stamens to the flower centers. Arrange the flowers and stamped images as shown.

Lastly, add a sentiment and dust the flowers with crystal clear glitter powder.

Other Products: White cardstock, Acrylic Shimmer additive, Pink Cardstock Clear Embossing Powder, Sheer white ribbon

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 4 3/4 x 7 1/4". Cut shaped card (see video) by folding a piece of 7 x 9” white cardstock to make 4 1/2 x 7” then placing die over-hanging top fold by about 1/2". Cut another front from pink also cut 2 outer dies of the Swirly Accents Die from pink for the stand. Cut the decorative section with the outer die of the Elaborate Oval Frames from white to create the white border for the card. Cut the decorative section of the Swirly Accent Spray 2 times from white and glue them to the pink stand die cuts. Cut 2 Petite Pocket Accent (wide decorative and narrow) from white. Glue the white border and Petite Pocket Accents to the pink card front then glue the stand to the front and back of the card bottom.

Stamp flowers using Pink Peony and Rose Madder then sponge with Pink Peony. Die cut and form in the shaping molds. For larger flowers pinch petals in a pleating fashion and glue 3 together to make each flower. On the smaller flowers only 1 for each flower. Insert stamen, add glue to set. Let dry then cut wires/threads at the base of flowers (save some of the wires to make curls).

Stamp Floral accents and fillers using Rose Madder and leaves, Fern Green, sponge leaves and stems with Leaf Green, die cut then form slightly from the back with a stylist. Curl some wires around a small paint brush. Cut the leaves and filler apart as needed to create an arrangement on both sides of the card. Add flowers and wire curls.

Stamp sentiment using Rose Madder on vellum and quickly add clear embossing powder to it to emboss with heat gun. Die cut sentiment with Ticket and Tags long eyelet Die. Glue it under flowers then glue a sheer white bow to the top.

Glitter flowers with Rajni’s Crystal Clear and glitter the base and fills with Ultrafine.

Other Products: Watercolor markers, Ranger Distress oxide-iced spruce, Ribbon

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

For more ideas on creating with the Special Sentiments Stamps & Dies, watch the tutorial at https://youtu.be/-dYnAWXIH3E.

Instructions: Prepare a 5.75” x 5.75" white base, bend the upper part inwards in half, then cut out two 5.5" x 5.5" squares from the paper collection and cut one in half. From white paper, cut with die HCD1-7271 Rounded Window Frame Die Medium and Small Frame. Stamp with pink ink HCPC-3935 Fancy Special Day Cling Stamp Set and cut out with a matching die.

Stamp images from the HCPC-3931 Large Floral Urn Cling Stamp Set and HCPC-3932 Floral Shoppe Accents Cling Stamp Set and HCPC-3933 Floral Shoppe Fillers Cling Stamp Set. Colour with watercolor markers and die cut using the coordinating die. Glue as pictured.

To create flowers, stamp the HCD1-7323 Dazzling Dahlia on the Deluxe Flower Shaping Paper Pack of 50 – White a few times using Ranger Archival Ink Pad – Leaf Green, cover the center of the flowers with green ink using the Stack and Store Daubers-Pack of 30, cover the edges with Archival Ink-Rose Madder then die cut using the coordinating dies and shape using the HCFB1-494 3D Dahlia Shaping Mold. Add pink stamens to the center of the flowers. Layer the petals together using the hot glue gun making sure to offset them. Add glue to the centers and add Go Man Go Prills. To create leaves, stamp HCPC-3929 Dahlia and Leaves Cling Stamp Set on Flower Shaping Paper using Ranger Archival Ink Pad - Leaf Green and cut with the coordinating die. Shape leaves using 3D Dahlia Shaping Mold. I cover the flowers and leaves with glue and cover them with Rajni Chawla's Crystal Clear.

Arrange everything as pictured and glue with hot glue. Cover some elements with glue and glitter. Add a ribbon.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, self-adhesive pearls

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock to 8 x 6.5" size, score and fold at 4" to get 4 x 6.5" base. Cut a piece of yellow paper from the Tulip Time paper collection to 3 13/16 x 6 5/16" size. Adhere it to the base. Cut another piece of the same paper to 3 3/8 x 5 1/4" and a little bigger piece of white cardstock. Glue them together and attach them to the base using adhesive foam. Stamp the sentiment with Just For You Sentiments Cling Stamp and Vibrant Fuchsia ink and cut it out. Cut out two of the biggest ovals from the white cardstock and one oval from yellow paper. Cut out a white decorative square with Butterfly Kisses die. Adhere all elements as pictured with dimensional adhesive and glue.

Stamp blossoms from Classic Rose Cling Stamp Set in Frost White ink onto Vellum paper, use Opaque Embossing Powder, then heat emboss them and diecut with coordinating die. Stamp Lilac flowers with Pink Peony ink and cut them out with coordinating die. Stamp 3 branches with Floral Shoppe Fillers stamp with Vibrant Fuchsia ink and cut them out with coordinating die. You`ll also need 2 branches from Leafy Accents Set and 2 Classic Rose leaves. Stamp them in Leaf Green ink and cut out with coordinating dies. Color them with Stack and Store daubers and inks, for flowers use Vibrant Fuchsia ink, for leaves use Leaf Green ink. Then shape all elements: lilac flowers shape with Deluxe Flower Shaping stylus, roses and leaves shape with molds. Shape Lilacs with Deluxe Flower Shaping stylus. Take some Lemon Chiffon Prills and glue them in the centers of flowers. Use dimensional adhesive and hot glue to attach inscription, blossoms and leaves onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Decorate card with few small self-adhesive pearls.

Other Products: Textured Pink Cardstock, Vellum Paper, Versamark, pearls, White Embossing powder, Distress Oxide (Wild Honey, Picked Raspberry)

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Ready basket measures 4” × 4” × 8.5”. First, cut 4 pieces of textured pink cardstock using Gateway Die from Scalloped Flourish Gateway die. Trim it from bottom side and make it 5” in length. Place decorative die on cardstock and run through die cutting machine. Do same with all four pieces. Create a small box using cardstock measuring 4” × 4” × 1”. Adhere decorative panels on all four sides. Cut Luxe Gold cardstock using same die and adhere them from inside the box. Cut a strip of cardstock measuring 12" × 1.5”, cut decorative borders using Stary Night Decorative Die. Glue on basket to create handle. Cut 2 strips 1 from Luxe Gold cardstock and 1 from cardstock and glue as shown.

For flowers, stamp wild rose flowers on vellum paper using versamark and heat emboss with white embossing powder. Cut flowers with coordinating die and paint using distress oxide. Shape using groove tool. Layer flowers and add pearls in the center of flower. Stamp Leafy Accents leaves on deluxe flower shaping paper using fern green ink and cut with coordinating die. Paint leaves using same ink and shape using shaping mold. Arrange flowers and leaves on box and glue them using hot melted glue. For finished look, apply Crystal Clear on flowers and leaves using Art Glitter Dries Clear adhesive.

Other Products: White cardstock, ribbon, Copic Makers: B91, B93, B95, C3,

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/kYiP8qJZ4rE.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 8 x 7 1/2" including flowers. Make a shaped card using the Lattice Swirl Gateway Die. Start with 6 x 6 folded card and leave top of die off the fold (this makes the folded card base about 1” shorter than the card front). Cut the Lattice Swirl again (full die cut) out of white cardstock and blue decorative paper. Cut the decorative part of the Lattice Swirl out of white. Glue together white card front, blue card front and then white decorative die. Glue this stack to the card base matching bottom and sides.

Stamp the Urn using Rich Cocoa die cut and color. Stamp the Floral Shoppe Accents and Fillers Using Buttercup, Fern Green and Magenta Hue, die cut and sponge color on using Leaf Green, Magenta Hue, Buttercup. Stamp Zinnias using Rose Madder, Buttercup, Magenta Hue, sponge, die cut and shape. Stamp Wisteria Using Magenta Hue, sponge, die cut and shape then make cascading flowers. Stamp Hydrangea blossoms using Sky Blue, sponge, die cut and shape. Glue 2 together for each flower then fill center with Prills. For Zinnia, glue 5 together for larger flowers and 2 together for smaller flowers, fill centers with Prills. For the small buds use left-over Wisteria blossoms, add a wire stamen and glue tightly together.

Once all the flowers are formed, fillers and accents colored and urn is colored then glue the urn to the card making sure the bottoms are even, leave the top open, (stuff a bit of gauze down in the bottom of urn to help it keep its shape). Start filling urn starting with the back layer and sides first. Fill the center portion with Zinnias and Hydrangeas. Loop Wisteria wires over the top of the urn in front and sides then tuck more leaves in around.

Stamp sentiment using black on decorative paper then die cut with the Ornamental small tag. Add a bow to the top and then glue it to the top of the urn between cascading flowers. Glitter all the flowers and card base.

Other Products: Picked Raspberry Distress ink, Worn Lipstick Distress Oxide ink, Hero Arts Unicorn white pigment ink, Wow superfine embossing powder, WOW heat gun, Crafter's Companion Regency Swirls 3D Embossing Folder, Oval makeup brushes, double sided foam tape and pearls

For more ideas on creating with the Special Sentiments Stamps & Dies, watch the tutorial at https://youtu.be/-dYnAWXIH3E.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Emboss a 6 1/2" x 4 1/2" piece of white cardstock using Crafter's Companion Regency Swirls 3D Embossing Folder. Adhere it on a slightly bigger piece of cardstock that has been inked lightly with Picked Raspberry distress ink. Adhere the resulting piece on a 5" x 7" white card base using double sided foam tape.

Die cut a piece of white cardstock using the Regal Frame & Accents Die. Ink it with Picked Raspberry distress ink and adhere it on the card front using double sided foam tape. Stamp the sentiment from Fancy Special Day Cling Stamp Set on a piece of white cardstock using Leaf Green Archival Ink and die cut it using the matching die from Fancy Special Day Die. Adhere it on the pink die cut using double sided foam tape.

Vellum Flowers: Stamp the flowers from Oakberry Lane Blossoms Cling Stamp Set on a sheet of Rajni Chawla's Vellum Flowerite with Hero Arts unicorn White pigment ink and heat emboss using Wow superfine embossing powder and WOW heat gun. Die cut all the flowers using the matching dies from Oakberry Lane Blossoms Die.

Ink the Oakberry Lane flowers with Worn Lipstick Distress Oxide ink as shown using Stack and Store Daubers. Gently rub over the flowers with a piece of soft cloth in circular motion to remove any leftover ink on the white embossing and make it bright again. Shape them using the pointed edge of the Groove Golf Tool Set. Pinch the petals in the middle and then gently curve the edges outwards.

Now use the ball tool and the molding mat from Deluxe Flower Shaping Kit to do a circular motion in the flower center to cup the flowers. Add a drop of 3-D Crystal Lacquer to the flower center, place another flower petal on top and press with the ball tool. Poke a hole in the flower center using the pointed edge of the Groove Golf Tool Set. Add a bunch of small Rock Candy Stamens and Medium Pastel Pearl Stamens to the flower center and adhere them with 3-D Crystal Lacquer.

Yellow flowers: Stamp the flowers from Wisteria Petals Cling Stamp Set on a sheet of Deluxe Flower Shaping Paper with Buttercup Archival Ink. Ink them with the same ink and die cut them using matching die from Wisteria Petals Die. Shape them using Deluxe Flower Shaping Kit. Add a pink stamen from Medium Pastel Pearl Stamens to the flower centers.

Leaves: Stamp the leaves from Oakberry Lane Blossoms Cling Stamp Set several times on a sheet of Deluxe Flower Shaping Paper with Leaf Green Archival Ink and die cut them using matching die from Oakberry Lane Blossoms Die. Ink them using Leaf Green and Vibrant Fuchsia Archival Inks. Shape the leaves using 3D Blossoms Shaping Mold.

Arrange and adhere the flowers and leaves as shown using 3-D Crystal Lacquer around the sentiment die cut. Add a few pearls on the die cuts to add a finishing touch to the card.

Other Products: Iris cardstock, clear iridescent medium, foam squares, DMC Flower Pearls – Snow White, clear gloss gel, foam tape, Memento ink - Dandelion

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

For more tips on creating with the Tulip Time collection, watch the tutorial at https://youtu.be/rfYMxeNBmJk.

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of green pattern paper 4 7/8” x 6 7/8” and adhere to the front of the card. Die cut the frame and insert using the No. 1 and No. 2 dies from the HCD2-7191 Intricate Swirls Die set out of gold cardstock. Adhere the outer frame to the front of the card using foam tape and then adhere the decorative inner die to the inside of the frame.

Stamp the filler images from the HCPC-3931 Large Floral Urn Cling Stamp set, HCD1-7330 Large Floral Shoppe Accents Die and HCPC-3933 Floral Shoppe Fillers Cling Stamp in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add I Cannot Tell a Lilac Prills to the lavender flowers, Lemon Chiffon Prills to the large background leaves and Snow White Flower Pearls to the dandelions. Add the yellow foliage and dandelion to the left of the frame.

Stamp the sunflower and hollyhock images from the HCPC-3927 Barnyard Accents Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Add I Cannot Tell a Lilac Prills to the centres of the hollyhocks and adhere to the left of the frame over the yellow foliage. Add the sunflower over the yellow foliage.

Stamp the vase image from the HCPC-3860 Tulip Vase & Fillers Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape lightly and adhere to the front of the card with foam squares just left of the centre of the card. Adhere the foliage behind the vase and add the purple flowers over the foliage with foam squares.

Stamp the bucket with tulips image from the HCPC-3859 Tulip Bouquet Cling Stamp set and the single tulips from the HCPC-3860 Tulip Vase & Fillers Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape and adhere over the sunflowers and hollyhocks as shown. Adhere the single tulips around the base of the bucket and vase with foam squares.

Shape, trim and adhere the rose leaves to the bottom right and left and top left as shown with foam squares.

Stamp the small flower images from the HCPC-3909 French Cottage ‘scapes Cling Stamp in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outer petals with Magenta Hue ink and die cut with the coordinating die. Colour the outer edge with Lilac Posies ink and the backs of the petals with Magenta Hue ink. Shape using Groove Golf Tools and add Crystal Clear glitter using clear gloss gel and Go Man Go Prills to the centres and then adhere over the rose leaves.

Stamp the sentiment from the HCPC-3845 Just For You Sentiments Cling Stamp set using Jet Black ink on the sentiment strip and trim. Adhere to the right of the vase and tucked in under the frame.

Stamp the butterfly images from the HCPC-3928 Dazzling Dahlia Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add clear iridescent medium to the wings and sprinkle Ultrafine Crystal glitter and adhere to the top left on the sunflower and on the sentiment strip.

Other Products: Hor glue gun; Dies cutting machine; Gold Marker

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Begin with a 5 x 7 white card base. Cut different size panels form the Floral Shoppe Paper collection, use the Gold Marker and go over all the edges, cut the sentiment out from one of the pages and use the marker on it as well. Add foam dots to the back and adhere to the card base as shown.

Stamp the flowers with the Lady Bug ink and color in with the Cantaloupe. Die cut with the coordinating die, ink the edges with more of the Lady bug and place in the matching mold to shape. Put 2 together and add stamens in the center.

Stamp the leaves with the Bamboo ink and color in with the New Sprout. Cut out with the coordinating die, ink the edges with the Bamboo Leaves, use the flower shaping tool to shape.

Use the Bamboo Leaves and stamp the side flowers, color with the lady Bug and Teal Zeal, cut out with the matching die, shape and adhere everything to the card as shown.

To finish, add glitter to all the leaves and flowers.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, cheesecloth, watercolor paper, distress oxide pad seedless preserves, distress oxide pad bundled sage, distress oxide spray seedless preserves, distress oxide spray twisted citron, nuvo aqua shimmer pen, funnel tray

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: The finished card measure 6 inches by 6 inches. Cut the card base from white card stock to 12 inches by 6 inches and score at 6 inches on the longer side. Fold to make a horizontal folding card. Cut a 6 x 6” piece of gold paper and glue it to the card base. Then cut out a piece of white cardstock paper 5 3/4 x 5 3/4” and glue it on the gold one.

Take a 4 1/2 x 4 1/2” watercolor sheet. Use a brush and plenty of water to create a watercolor effect with your distress oxide spray seedless preserves and twisted citron ink. Let it dry and cut in 1 1/2 squares (9). On this square, stamp different stamp from floral shoppe collection using color box ink. Put gold embossing powder and emboss it with your heat gun. Cut 9 squares in gold paper (1 3/4 x 1 3/4 ») and glue your embossed square on it. Then glue all those 9 squares on your card base.

Make a big flower in vellum paper. Stamp 3 Dahlia flowers (the second bigger) with colorbox white ink onto vellum paper. Emboss with the white powder. Color the petals with seedless preserves distress oxide. Diecut with the coordinating die. Give further shape with Deluxe flower shaping kit tools. Glue 3 layers together. In the center of the flowers make a hole and add gold, green and pink stamens.

Stamp 3 leaves from the Floral Shoppe collection with colorbox white ink onto vellum paper. Emboss with the gold powder. Color the leaves with bundled sage distress oxide. Diecut with the coordinating die. Give further shape with Deluxe flower shaping kit tools.

Put cheesecloth on your card. Add your flowers and your leaves on it. Die cut a tag in white cardstock with Ornemental Tag. Stamp sentiment from Elaborate Birthday in Seedless preserves ink. Ink the edge of the tag and put a little bit of glimmer with the nuvo pen. Glue it under the flower.

Other Products: Vellum Paper, Versamark Embossing Ink, Ranger White Embossing Powder, Golden embossing powder, hot glue, distress ink mowed lawn, hot glue gun, dimensional Tape, acrylic block, scissors, die cutting machine, Nida Tanweer Magic Glitter Powder.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: For the card base, cut a piece of Deluxe Flower Shaping Paper cardstock to 9” x 12” size, score and fold at 12”. Cut another piece of white cardstock measuring 8 3/4 x 5 3/4” and adhere this layer on card base using dimensional tape. Trim paper from designer paper collection measuring 8 1/2 x 5 1/2 and adhere on to the card base using clear glue.

Die cut Ornate Flourish Gateway Die set on white card then again cut and remove middle frame outline, set outer and inside dies on white card. Adhere both together using dimensional tape. Apply clear glue using sponge cover with glitter. Add this door on card center using clear glue.

Next, Stamp the sentiment on Vellum using versamark ink cover with golden embossing powder, heat it using heat tool, add in the center as shown.

For the flowers, Stamp the classic rose stamps on Vellum Paper using versamark Embossing Ink cover with White embossing powder heat, using heat tool and die cut using coordinating die. Color using coastal coral Archival ink from the back side in the centers, shape the flowers using shaping mold. Finish shaping using shaping kit and make a few flowers. Stamp the leafy accents from leafy accents stamp set with leaf green ink and color using Vivid Chartreuse ink and diecut using coordinating dies. Shade edges with mowed lawn ink. Use the Stack and Store daubers to color the flowers and leaves, Shape the leafy accents in mold, next apply clear glue to the flowers and leafy accents with sponge and sprinkle some Magic Glitter.

Arrange all ready elements as shown add nuvo drops to embellish the card. Use hot glue to assemble the flowers.

Other Products: Die cutting machine, scoring board, dimensional foam tape.

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The finished card base measures 6” by 6”. Cut flower shaping paper 12 by 6” and score at 6” mark and fold. Cut light background designer paper at 5 7/8 x 5 7/8” and adhere to card base. Cut a dark red pattern paper from paper collection at 5 1/2 by 5 1/2” and remove the centre square leaving 1/2” border all around. Adhere to the card front using dimensional foam tape.

Cut two gold frames using the eyelet circle dies from the Decorative circle frames die set and the Circle basics large die set. Cut a round die cut from pattern paper using the circle die and add to the back of the bigger frame. Cut out a sentiment from pattern paper using the smaller circle die and add to the back of the small gold frame. Cut a rounded window frame die in white card stock and adhere to the card front. Adhere the two gold frames on top of each other.

Stamp images in black ink from the Floral shoppe Accents cling stamp set on deluxe flower shaping paper and cut with the matching die. Colour the images with Zig real brush pens.

Stamp the wild rose flowers from the wild rose collection with vibrant fuchsia archival ink. Colour with same ink and butter cup. Shape them with deluxe flower shaping kit.

Arrange the flowers and all the floral accents alongside the gold frame to finish the card.

Other Products: Memento ink – Dandelion, Clear glossy gel

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of Deluxe Flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”. Cut a piece of gold cardstock 6” x 6” and adhere to the front of the card. Cut a piece of pattern paper 5 7/8” x 5 7/8” and adhere to the front of the card. Stamp the sentiment from the HCPC-3845 Just For You Sentiments Stamp Set in Lilac Posies ink on the bottom right of the card. Die cut the long scallop rectangle from the HCD1-7201 Ticket & Tag Die Set out of gold cardstock. Die cut the decorative circle die from the HCD1-7283 Courtyard Elegance Die out of gold cardstock. Cut in half and then adhere behind the scallop rectangle die and then adhere to the front of the card. Die cut the long rectangle strip from the HCD1-7201 Ticket & Tag Die Set from pattern paper and adhere to the scallop rectangle.

Stamp the flower images from the HCPC-3820 Large Sweet Peonies Cling Stamp Set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outer petals with Magenta Hue and die cut with the coordinating dies. Colour the edges of the petals with Lilac Posies ink and the backs of the petals with Magenta Hue ink. Shape using the 3D Basic Flower Shaping Mold and assemble using two of one size and one smaller size. Pierce the centres and insert gold coloured pearl stamens. Trim the threads and add Crystal Clear glitter using glossy gel and adhere across the card front as shown.

Stamp the leaves from the HCPC-3820 Large Sweet Peonies Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Bamboo Leaves ink and die cut with the coordinating die. Colour the backs of the leaves with Vivid Chartreuse ink and shape using the Groove Golf Tools. Add Crystal Clear glitter using glossy gel and adhere around the peonies.

Other Products: White & Cream cardstock, Dimensional Adhesive, cheesecloth, Hot Glue, Paper Trimmer, Scor-Pal Measuring & Scoring Board, Die Cutting Machine

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Cut cream cardstock 5 1/2 x 8”, score and fold a 4”. Diecut floral urn on folded card base, being sure the top of the die hangs off the card base, so the fold stays intact. Stamp Floral urn onto tan designer paper using Pebble Beach ink, diecut with coordinating die, then diecut an additional urn from cream cardstock. Color the stamped image lightly, then glue onto cream urn diecut, only applying glue onto the sides and bottom of urn, creating a pocket to insert the floral accents.

Stamp the 3 small dahlias onto Deluxe Flower Shaping paper using Light House ink and diecut. Color with Sunflower and Light House ink, shaping using shaping mold, then assemble. Pierce the center of each petal, then insert a rose hip stamen in the center and secure using hot glue. Wrap petals tightly around it, creating a bud using hot glue to secure. Create a second bud for the second flower, this time adding a second layer around it the create a larger flower. Ink the stamen wire using Olive ink.

Stamp the following accents onto white cardstock. From the Large Floral Urn stamp set stamp the elongated leaf x2 using Olive ink, and the small flowers x2 using Light House ink. From the Floral Shoppe Accents stamp set, stamp the rounded leaf x2 using Olive ink, the berry sprig x2 using Light House ink and the large bud x2 using Jet Black ink. From the Floral Shoppe Fillers Stamp set, stamp the small & large zinnia bud using Jet Black ink, the floral spray x2 using Olive ink stamping off 1x, and the wildflower spray using Seafarer ink. Diecut all with coordinating dies and color using Stack and Store daubers

Color the elongated leaf using Olive and Light House, the small flowers with Sunflower and Olive, the rounded leaf with Olive and the berry sprig with Light House and Olive. On the two large buds color the foliage with Olive and the flower bud with Seafarer, on one trim off the flower bud, then layer the remaining buds together using foam adhesive to create dimension. Color the small zinnia buds with Seafarer and Olive ink, the large with Olive and Light House, the floral spray with Olive (very lightly), and the wildflower spray using Seafarer and Olive ink. Shape these pieces using the Deluxe Flower Shaping kit and snip apart as needed.

Use 3 gold stamens from the Rose Hip Stamen collection and ink the wires with Olive ink and the gold with a layer of Light House ink to appear like rose gold in color. Allow to dry. Once dry, wrap wire around a piercing tool or golf tool to create a spiral effect. Insert a small piece of cheesecloth into urn pocket, then add and arrange pieces as shown with a dab of hot glue. Once happy with arrangement, go through and securely adhere pieces with hot glue to add dimension.

Use Dries Clear glue to glue urn pocket onto shaped card base. Stamp sentiment using Pebble Beach ink, diecut using Ornamental Tags die, cutting length down with a paper trimmer, then cut a gold mat from Luxe Gold cardstock allowing a 1/16” on each side. Adhere sentiment on card using foam adhesive, adding a few leaves left over from bouquet. Add sparkle to the card using Dries Clear and Crystal glitter. Finally, if desired, add Crystal Lacquer onto the berry sprigs for a bit of a glossy effect.

Other Products: Die cutting machine, scoreboard, bone folder, hot glue gun,

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

Instructions: Card measures - 5 inches by 7 inches. To create a 5” x 7” card base - cut out a 10” x 7” piece of White card and score it at 5” (long side up), fold using a bone folder along the score lines. Cut out 4 7/8” x 6 7/8” piece of Cascading Petals Paper Collection HCDP1-2115 and die cut it using HCD2-7327 Elegant Swirl Gateway Dies, then adhere the final piece to the card front. Die cut a frame of White Card with Cascading Petals Paper Collection HCDP1-2115 using HCD2-7327 Elegant Swirl Gateway Die and adhere it to the card front with 3D foam. Die cut nesting decorative shape from Luxe Silver Cardstock usingHCD2-7327 Elegant Swirl Gateway Die adhere it to the card front as shown. Die cut small frame with Cascading Petals Paper Collection HCDP1-2115 using HCD2-7327 Elegant Swirl Gateway Die and adhere it to the card front.

Stamp the leaf images from Wild Aster Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad -Elderberry, then colour the image with Memento Dye Ink Pads - Bamboo leave and Elderberry using HCDA1-449 Daubers. Die cut using coordinating Wild Aster Die and shape them with Deluxe Flower Shaping Kit HCST1-401. Stamp a wild aster image from Wild Aster Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Elderberry, then colour the image using Memento Dye Ink Pads - Rose Bud, Elderberry using HCDA1-449 Daubers. Die cut the images with matching Wild Aster Die, then shape them using Deluxe Flower Shaping Kit HCST1-401. Assemble Wild Aster flower petals using a hot glue gun. Apply Designer Dries Clear Adhesive on the flower petals and leaves and sprinkle with PGM15015 Rajni Chawla's Crystal Clear glitter. Adhere the flowers to the card front using a Hot glue gun and fill in the composition with leaves, flower buds and decorative sisal.

Die cut the sentiment from Cascading Petals Paper Collection with Ticket and Tags Die HCD1-7201 and adhere it to the card front using 3D foam.

Other Products: White Cardstock, Hot Glue Gun, Die Cut Machine

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/-dYnAWXIH3E.

Instructions: My card size is 5" x 7". Make card base and pick a piece of the paper collection and cover the card front leaving just a small margin of white around the edges. Diecut the Regal Frame from white cardstock and adhere to the card front.

Stamp the flower petals in Cactus Flower and Buttercup then color with Majestic Violet, Cactus Flower and Buttercup. Make sure to color the backs of the flower petals and the leaves. Lay on the molds, spritz with water and run through the die cut machine. Lay out onto the desk mat to dry. I stamped the leaves with Fern Green then colored with Leaf Green. Lay onto the mold, spritz with water and run through the die cut machine. Lay out onto the desk mat to dry.

Make the flowers and add prills to the centers and allow to dry. You can use a bit of hot glue and drop prills onto that to add a more dimensional flower center. I did this with some of the flowers and some I just did the traditional way using Dries Clear Glue.

Decide on the placement of your flowers and leaves and glue down using hot glue. The card is finished.

Other Products: Distressing Tool, Hot Glue Gun, Diecutting Machine, Dimensional Tape, Satin Cord

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size is 6 x 6”. Score and fold 12 x 6” Deluxe Flower Shaping Paper at 6”. Cut dark pink designer paper at 5 7/8 x 5 7/8” and light green designer paper at 5 3/4 x 5 3/4”. Ink the edges of both using Archival Vibrant Fuchsia ink and then distress using a distressing tool. Adhere the layers together using dries clear adhesive and then adhere to card base using dimensional tape. Cut one of the 6 x 6” panels from the paper collection to 5 7/8 x 5 7/8”, ink the edges, distress and adhere to the inside of the card.

Stamp the large and small wild roses on Deluxe flower shaping paper using Vibrant Fuchsia ink, color with the same ink and Vivid Chartreuse ink, diecut using the coordinating dies and shape in the Small and Large 3D Wild Rose Shaping Molds. Layer three same size petals together to create the large flower. Use the groove golf tool to make a hole in the center and pull the stamens through. Use the hot glue gun to secure the stamens. Adhere two of the same size petals together to create the smaller flowers, add dries clear adhesive to the flower centers and add Minnie Pearl Prills. Sponge the flowers with dries clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Stamp the Leafy Accents leaves on Deluxe Flower Shaping Paper using Archival Olive Ink. Color using the same color and Bamboo Leaves ink and diecut using the coordinating dies. Shape using the Leafy Accent Mold, sponge with dries clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Adhere the flowers and leaves to the card front using hot glue. Add satin cord bows.

Other Products: Foam tape, Versamagic Pretty Petunia, Clear glossy gel

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the card. Cut two outer decorative dies -one out of silver cardstock and the other out of Deluxe Flower Shaping Paper using the No. 1 die from the HCD2-7192 Eyelet Lace Frame Die. Adhere the silver decorative frame to the white frame and then adhere to the front of the card.

Stamp the leaf images from the HCPC-3887 Wild Asters Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Bamboo Leaves ink and die cut with the coordinating die. Colour the backs of the leaves with Vivid Chartreuse ink and shape using the Groove Golf tools. Add Crystal Clear glitter using glossy gel and adhere to the bottom left of the frame.

Stamp the flower images from the HCPC-3887 Wild Asters Cling Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Tiger Lily and Cantaloupe inks and the outer petals with Pretty Petunia ink and die cut with the coordinating dies. Colour the backs with Pretty Petunia ink and the edges of the petals with Lilac Posies ink. Shape using the Groove Golf tools and assemble with two layers of each size. Pierce a hole in the centres and insert the gold coloured stamens. Add Crystal clear glitter with glossy gel, trim the threads and adhere to the upper left of the frame over the leaves as shown.

For the buds stamp the small size flower images from the HCPC-3887 Wild Asters Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Colour the backs with Vivid Chartreuse and shape using the Groove Golf tools. Assemble using one green and one pink layer. Pierce the centres and insert the gold coloured pearl stamens. Add Crystal Clear glitter using glossy gel and trim the threads and adhere around the larger flowers.

Die cut the tag from the patterned paper using the coordinating die from the HCD1-7201 Ticket & Tags Die set and adhere among the flowers.

Other Products: Inks: Archival ink- Saffron, Thistle, Venetian Orange. Other: Gold micro beads, Hot glue gun, Misti stamping tool, Double sided tape, 3D double sided foam tape, Card board box-corrugated (for 3d strips), Cardboard (Cereal box), Glitter, Sandpaper, Water mister.

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: The size of this layout is 12 inches x 12 inches (30cm x 30cm). The design paper, sheet #1B from the collection will be your layout background base. Adhere this to the grey cardboard from the paper collection pad so the lay out will be sturdy.

You will need the sheet #11B for the lace frame and the tags. Using the eyelet lace frame die, die cut this twice. From this same design paper die cut also the two matting tags and using the inner die of the tag from the album tags and accents die set. The tag base is cut from the white cardstock and inked with the cornflower blue ink. Using the open hearts from the treasured heart gift box die set, die cut two hearts from the design paper, die cut also eight extra hearts from the white card stock (four for each heart) Adhere the lace frames to the lay out base. Adhere the tags together. Cut the photos to fit to the tags, mat these with cardboard (cereal box). Using sandpaper, sand the photo edges. Use the corrugated box cut into strips or 3D foam dots to raise the photo when adhering to the tag. Adhere all the heart layers together and adhere to the tag.

To make all the embellishments used: Use the white card stock, the library green ink and the misti stamping tool for all the stamping. You will need to stamp: x3 large urns, as many leaves and fillers wanted, one large and three small dahlia petals for each flower. When all is stamped, use the archival inks to bring color to the elements. These dahlias are colored only in the centers using the saffron ink. The urn is colored with the cornflower blue and red geranium inks. Using the matching die sets, die cut all the stamped and colored images.

To make the dahlias: Use the dahlia shaping mold and a water mister to bring shape to the flower petals. When still moist from the shaping squeeze the tips to pleat and bring further shaping. Use the golf tools and balling tools for further shaping if needed and to further ball the flower center for the top petal layer. Using the hydra sponge apply the clear drying adhesive to the flower petal tips and then dip the tips into the glitter. When the is dry tap the excess glitter away and adhere the petal layers together. Apply adhesive to the center of each completed flower then pour in the micro beads. When the adhesive is dry tap away any excess beads. These flowers are now ready to use.

Once you have arranged and decided where the urn and tags will go, adhere in place. Taking into account to leave enough room for the flowers as these will be placed between the tags and urn. Adhere the flowers in place then adhere all the fillers and leaves as shown.

Other Products: White cardstock, Big-Shot Machine, Gold Beads, Nuvo Crystal Drops-carnation pink

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Take white cardstock size 10” x 7” and fold in half, place largest Majestic Swirl Frames Die HCD2-7308 overlapping the top fold and die cut to create a shaped card base. From same die set, cut one frame from pattern paper and adhere it on the card base. From the same die, set cut one intricate frame on white cardstock and adhere it on the card base, as pictured using foam tape. Cut another layer on pattern paper which is smaller than the large frame die and adhere it using foam tape. Cut another layer of die from Elaborate Oval Frames Die HCD2-7309 on white cardstock and add sentiment from Just For You Sentiment Cling Stamp Set using archival ink-jet black and adhere this die using foam tape.

Stamp Dazzling Dahlia flower on vellum using Colorbox frosty white ink and sprinkle white embossing powder and then heat using Heating Tool. Cut them with coordinating die and color them using archival ink-sunflower. Create two layers of these petals, shape them and create a flower. Add stamens in the centre. Stamp some fillers flowers and leaves from Large Floral Urn Cling Stamp Set HCPC-3931, Floral Shoppe Accents Cling Stamp Set HCPC-3932, Floral Shoppe Fillers Cling Stamp Set HCPC-3933 on white cardstock and using archival ink-library green, cut them with coordinating die and color them with leaf green and magenta hue and on berries add nuvo crystal drops using color pink and add glitter while they are wet. Create arrangements as shown.

Other Products: Gems, Beads, Stampin Up Ink (Baroque Burgundy), Embossing Pad, White Embossing Powder, Scoring Tool, Cardstock- Kraft, Scrapbook Adhesives by 3L (E-Z Runner Ultra, Dual Tip Glue Pen, Adhesive Dots Medium)

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Stamp and die cut 2 of the Large Floral Urn using an embossing pad and white embossing powder onto kraft cardstock. Cut a piece of kraft cardstock that is 3 x 7.5. Score 1/2 an inch in on both long sides. Using scissors, I then notched out little triangles up both long sides to the score line to create a series of tabs on each side. Fold the tabs inward. Using a strong adhesive, add glue to each tab and then adhere to the inside of one of the Large Floral Urn images. This creates a bowl shape. Adhere to the inside of the other urn to complete the gift basket.

Stamp 1 set of each size of the Small Wild Rose onto deluxe flower shaping paper using brown ink (Staz On- Timber Brown). Die cut the images. Add color to the flowers using red ink (Baroque Burgundy) and daubers. Shape the leaves using the coordinating shaping mold. Then assemble the flowers and add beads to the middle of each using liquid adhesive. Stamp 2 of the leaf images onto white cardstock using brown ink. Add color to the leaves using green ink (Archival- Olive) and daubers. Shape the leaves slightly.

Add flowers and gems to the gift box. Then add the shaped leaves using adhesive dots.

Other Products: Die cutting machine, scoring board, dimensional foam tape.

For more tips on creating with the Woodsy Wonderland collection, watch the tutorial at https://youtu.be/TldMdgGbYkQ.

For more tips on creating with the Classic Rose collection, watch the tutorial at https://youtu.be/Z8P070kC3oo.

Instructions: The finished card base meaures 7” by 5”. Cut flower shaping paper 6 3/4 x 4 3/4” and adhere to the card base. Cut light background designer paper a little smaller than the mat layer and create a frame leaving a 1/2” border all around. Cut a dark red pattern paper from paper collection at 5 1/2 by 5 1/2” and remove the centre square leaving 1/2” border all around. Adhere to the card front using dimensional foam tape.

Cut an intricate swirl frame die in white card stock and add to the inside of the frame. Cut a decorative ornate oval die cut in luxe gold card stock and add to the top of the card.

Stamp images in black ink from the woodsy wonderland cling stamp set on deluxe flower shaping paper and cut with the matching die. Colour the images with Zig real brush pens.

Stamp the classic rose smallest flower with Rose Madder archival ink. Colour with same ink. Shape them with deluxe flower shaping kit.

Arrange the flowers and all the leaves with the stamped image to create a wood scene.

Cut a sentiment from the paper collection and add as a border at that card base.

Other Products: Die cutting machine, Distress Ink-Rusty Hinge

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Using the Eyelet Rectangle & Basics Die, cut out 2 rectangles on Deluxe Flower Shaping Paper. On a smaller rectangle, stamp selected cones in layers. In the designated place, first reflect the small cone, and cover it with its outline. Then reflect the large stamp and cover its outline. Stamp additional leaves as shown. Use green for the leaves and brown for the cones.

On the green sheet of the Snowy Pines collection, cut a slightly larger rectangle from the set. Adhere the image with cones using glue. Place it in the center of the larger rectangle. Put it all on green paper and place it on a Deluxe Flower Shaping Paper base.

Other Products: Scissors/paper trimmer, hot glue gun

For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: On 5 x 7” card base, adhere patterned designer paper from Summer’s Garden Paper Collection edged with Archival Bright Tangelo. Center the 3 1/4 x 5 1/4” Swirl Frame (2) onto the front of the card and die-cut an aperture into the front of the card base. Use the aperture to place the die back inside and using tape, fix together the two largest Swirl Frames and die-cut 1x in green designer paper (edge in Fern Green) and 1x in white cardstock. This will ensure the aperture and the green and white frame will be the exact same cut. Adhere clear cardstock behind the green Swirl Frame. Use the 3 1/4 x 5 1/4” white Swirl Frame and adhere on top of the clear cardstock. Add Foam strips behind the frame and mount onto the front of the card.

Adhere a decorative designer paper behind the white Swirl Frame and adhere to the inside of the card. Die-cut Swirl Frame (3) 2.25 x 3.5” in green and again in white and adhere together. Edge the green Swirl Frame in Fern Green and mount using dots. Die cut Swirl Frame (4) in white cardstock and stamp ‘get WELL wishes’ in Fern Green from Cheerful Note Sentiments and adhere to the Swirl Frame.

Stamp onto Deluxe Flower Shaping Paper in Archival Red Carnation the Wild Small Rose. Use the daubers to color with Bright Tangelo. Die-cut and color the backs in Bright Tangelo and edge with Carnation Red and Sepia. Place in the mold and spritz with water prior to running through the die-cutting machine. Use the Flower Shaping Tool Kit to cup the centers. Adhere the petals with hot glue and add dries clear to the centers prior to adding prills and glitter.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green and die-cut with coordinating dies. Color the back of the leaves in Leaf Green and fronts in Leaf Green and Vivid Chartreuse, edge the leaves in Fern Green. Place in the coordinating mold and spritz with water prior to running through the die-cutting machine.

Use a hot glue gun to adhere the Wild Roses and Leafy Accents to the front of the card.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels 241, 224, 238, 236, 235

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: For the base use Gateway Fold Card – White. Cut 6 panels using outside Scalloped Flourish Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Scalloped Flourish Gateway Die all decorative frames from gold and paper collection paper. Glue gold frames under paper collection frames making sure to offset a bit and adhere to the front of the shaped card using Darice Adhesive Foam Strips.

Stamp the Large Sweet Peony Cling Stamp Set on foam paper using Ranger Archival Ink Pad - Garden Patina and cut using the coordinating dies. Color with Gallery soft oil pastels 241, 224. You will need 2-3 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using one of the larger shaping tools. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves using Floral Shoppe Fillers Cling Stamp Set, Floral Shoppe Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Adhere the flowers and leaves to card using a hot glue gun.

Stamp sentiment using Elegant Gateway Sentiments Cling Stamp Set on the piece of paper from the collection with Ranger Archival Ink Pad – Coffee and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: adhesive backed foam, Bristol Smooth Cardstock, White Cardstock

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Summer's Garden Collection watch the tutorial at https://youtu.be/-dYnAWXIH3E.

Instructions: Create a card front using the Ornate Flourish Gateway Die. Cut a card front with the Ornate Flourish Gateway Die in blue designer paper from the Floral Shoppe Paper Collection and adhere to card front, cut the inner part of the die in white cardstock and adhere.Cut out the sentiment from the paper collection with the Eyelet Oval and Basics Large Die, adhere to adhesive backed foam, distress with Paradise Teal and adhere to Royal Elegance Frames Die, cut in white cardstock.

Stamp the florals shown in photo from the Large Floral Urn Cling Stamp Set, Floral Shoppe Accents Cling Stamp Set and Floral Shoppe Fillers Cling Stamp Set in Archival Olive ink on Bristol Smooth Cardstock, color with Zig Clean Color Real Brush Markers, cut out with coordinating dies and sculpt with stylus. Adhere as pictured.

Stamp the Large and Small Garden Zinnias on Deluxe Flower Shaping Paper with Paradise Teal ink, sponge with same, and cut out with coordinating dies, sculpt with the Large and Small 3D Zinnia Shaping Molds, add prills and glitter.

Adhere flowers as shown.

Other Products: White card, night of navy ink – stampin up! versafine clair black ink, versa mark, silver embossing powder, foam pads, clear embossing powder

For more tips on creating with the Floral Shoppe Collection watch the tutorial at https://youtu.be/unrqvzpfu1U.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Cut a 9” x 7” piece of white card. Score and fold at 4.5”. Line the scallop die with the fold so that it overlaps and die cut to create a shaped card.

Die cut a complete scallop gateway from white card and the smaller gateway shape from festive winterscapes paper collection, edge the paper with night of navy ink and layer these 2 pieces onto the base card.

Using paper from the collection, die cut the 2 eyelet rectangles and one of the plain rectangles, edge the lighter shapes in night of navy ink. Layer these 3 layers together using dries clear adhesive and position onto the card base using foam pads.

Stamp the sentiment in black versafine onto pale blue paper from the collection, cover with clear embossing powder, remove excess and heat to set. Die cut using a rectangle, edge with night of navy ink and mount onto a white piece of card the same size. Add to the card base using foam pads.

Stamp 3 of the filler flowers in versamark onto white card, cover with silver embossing powder and heat to set. Diecut and shape using the flower shaping tools.

Stamp 3 of the smaller wild roses onto paper from the collection using black memento ink. Die cut and shape. Layer the 3 sets of petals together and thread 15 small stamens and one large stamen through the centre. Secure using hot glue. Cover the flower and stamen with dries clear adhesive using a hydra sponge and sprinkle with glitter. Allow to dry.

Position the fillers and flower at the top of the card using hot glue.