Other Products: White Card, distress tool, 3D foam pads

Watch this video https://youtu.be/KOy_qNB9OAk to see how to shape the Classic Petunias.

Instructions: Using the white card make a 7" x 5" tent fold card and die cut two of the border dies. Cut a piece of paper from the paper pad 6 3/4" x 4 3/4" and ink and distress the edges. Adhere to the front of the card. Adhere the two border die cuts to the card. Cut another piece of coordinating paper 6 3/4" x 1 1/2", ink and distress the edges and adhere with 3D foam pads to the card. Cut a card front from the paper pad and trim down the edges, stamp the sentiment and adhere to the centre of the card front. Stamp the petunias and leaves in black ink onto white cardstock. Cut, color and shape the flowers and leaves. Adhere the flowers and leaves. Use Dries Clear glue to add prills to the flower centers.

Other Products: Cosmic shimmer Crackle Glaze, Creative Expressions Micro Beads, Black Card, Pearls, Ribbon and Acetate 

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Take the pockets and flipfold inserts B-Black 7"x 21". Cover with the pink paper from the petunia collection. Glue the small sections together to create pockets. Take the circle topper and cut this out carefully we can use the frame at a later date. Cut one of the hummingbirds out attach it to acetate. Make a small cut in the topper and place acetate through and mat on top black card. Glue to the bottom pocket, Take a selection of tags mat and layer with black card. Tuck these into the pocket. Cut color shape and glue your flowers around the top. Add another hummingbird in between flowers. Add sentiment and a few flowers to the opposite corner.

Other Products: white card stock, Gemini Die Cutting Machine, ColorBox Chalk Ink - Dahlia, Pink Pastel, and Serene,  VersaFine Black Ink, gold sequins, Spellbinders Circles (Lg), Glitter Ritz, pop dots, scissors, paper trimmer

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Create a 6"x 6" card base using white card stock. Locate preprinted background panel in paper collection and trim to fit slightly smaller on card base leaving a white border around background mat. Ink edges with a bright pink ink and adhere to card base. Locate preprinted 6"x 6" card front as shown. Trim down to center square and then die cut circular center. Ink all edges of square portion using a bright pink ink. Adhere to card base using pop dots. Adhere circular die cut to center using several layers of stacked pop dots. Die cut decorative border using white card stock from the Cut Mat Create 2A Die and adhere to side of card as shown. Stamp small petunias, basket, small flower arrangement, vining petunia corner border as well as hummingbird onto white card stock using black ink. Die cut using coordinating dies. Color all embellishments using stack and store sponge daubers. Shape basket and adhere to card front over preprinted card basket. Shape and adhere small petunia bouquet to be spilling out of basket. Shape petunia corner embellishment as well as all remaining flowers in the sizes you desire. Adhere corner embellishment to top corner as shown. Arrange shaped petunias in flower basket arrangement and one to top corner on corner embellishment. Adhere shaped hummingbird image among flowers as shown. Cut an inside premade background panel from paper collection, ink all edges with a bright pink colored ink and add to inside of card. Adhere sequins to front of card as shown and glitter to all stamped and shaped flowers as well as all preprinted elements on designer paper on front and inside of card.

Other Products: Spellbinders Scrapiniec Explosion Box, Recollections Embellishment, Memento Tuxedo Black Ink, Craft Knife, Tombow Glue, Stamens, Scrapiniec Embellishment, Foam Tape, Glue Gun, Artisan X-Plorer machine

Instructions: Click here to see a close up view of this box. Take your Classic Petunia paper and cut 8 3.75 x 3.75" panels. You will then glue one of the 3.75 x 3.75" cuts on each side of the explosion box until all 8 sides are covered. For the top of the box cover you will cut a 4 x 4" piece of Classic petunia paper and adhere it to the top of the box. Once done you will need to cut 4 2 x 3.75 pieces" for the sides of the top of the box. For the outside decoration of the box cut the decorative panels from the sheet of Classic Petunia patterned paper and adhere some foam tape to the back side of the paper. This will form a pocket that you put some memorabilia items in. Now affix it to one of the outside panels of the explosion box. For another panel fussy cut images from the Classic Petunia set as decor for the panel. Once this is complete add a total of 8 diamond embellishments from the package. Now to complete the inside of the box you will use the remaining 4 panels that you cut to decorate the inside of the box.  Here you will cut the image from your Sugar Hollow collection to decorate the inside of the box. You can add more elements from the patterned paper you have to decorate. To complete the top of the box you will need to stamp 4 medium size classic petunia flowers with your Memento Tuxedo Black ink. Once complete, diecut with your Classic Petunia matching die. Use your Deluxe Flower Shaping tool to shape and mold the flowers and adhere together using your glue gun. Now use the stamens to decorate the centers of each of the flowers. You will affix the Scarpiniec embellishment to top putting the flowers you made to the side decorating the top of box. To finish it off fussy cut one of the owls from the Sugar Hollow collection to complete the look.

Other products: White cardstock, Spellbinders Floral Oval, Spellbinders Large Oval, Copic Markers E19, R81, R85, RV34, YG03, RG05

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Base card: Cut a piece of white cardstock 10" x 7" and score and crease down the middle of the long side to create a base card of 5" x 7". Cut a piece of the 12" x 12" ombre patterned piece to 5" x 7" and adhere to the base card. Cut a piece of white cardstock at 5" x 7" and using the HCD1-7118 Delicate Border Basics lace edge die cut the top and bottom and adhere to the base card. Trim a piece of the 6" x 6" ombre patterned paper to 5" x 6" and using the edge dies from the HCD1-7119 Classic Border Basics die cut the ends to fit and adhere to the front of the previous die cut card

To create the frame die cut the large oval from the Floral Oval set. Die cut another two of the same oval but this time using the Spellbinders Oval die cut the centre out and adhere the two pieces together. Adhere to the base floral oval with foam tape for depth. Die cut the oval featuring the hanging basket of petunias and adhere the patterned paper oval into the centre of the frame, and then adhere the entire frame to the base card with foam tape. 

Stamp the corner floral from the HCPC-3787 Classic Petunia Bouquet Cling Stamp set

and colour in with Copic markers R81, R85, RV34, YG03, YG05. Die cut and shape before adhering to the top of the oval.

 To make the pink flowers stamp the images from the HCPC-3785 Classic Petunia Cling Stamp set with Berrylicious and sponge the stamped images with the same ink. Die cut the images with the coordinating die and colour in the back with the Berrylicious ink. Mist the backs of the flowers with water and shape with the Deluxe Shaping kit. To make the green flowers stamp the images from the HCPC-3785 Classic Petunia Cling Stamp set with Bamboo Leaves and sponge the centres lightly with New Sprout and die cut using the corresponding die. Sponge the edges of the petals with New Sprout before shaping the flowers. Once shaped add the prills to the centre of the flowers with the Dries Clear glue. Adhere around the frame as shown. Stamp the leaves from the HCPC-3785 Classic Petunia Cling Stamp set with Espresso Truffle ink and sponge with Bamboo Leaves ink before die cutting with the coordinating die. Shape, trim and add leaves to the flowers as shown. Stamp the long strand of flowers from the HCPC-3786 Large Classic Petunia Cling Stamp Set in Espresso Truffle ink and colour in with Copic markers R81, R85, RV34, YG03, YG05 and die cut. Trim the ends with the flourishes and adhere around the oval. 

Die cut the tags using the dies from the HCD1-745 Luggage and Tags Die set and add to the card.

 To finish add Krystallos glass glitter and ultrafine crystal glitter to the flowers using the Dries Clear Glue.

Other Products: Unfinished Wooden Birdhouse, Moss Mat, Spellbinders Standard Circles Dies Small and Large, White Acrylic Paint, Sandpaper, Mod Podge, White Cardstock, Memento Grape Jelly Ink Pad, Paint Brush, Misti, Memento Markers Bamboo Leaves, New Sprout, Lilac, Posies, Lulu Lavender and Sweet Plum, Hot Glue Gun, Big Shot, Broken China and Antique Linen Distress Inks, Shimmer Spritz Sparkle

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Click here for a close up view of this birdhouse. Sand and paint unfinished birdhouse. Cut paper from the Classic Petunia Paper Collection to completely cover house. Sponge all edges with matching inks and adhere to the house using Mod Podge. Cut the papers for the roof and the trim and edge using Border Essential Die. Ink the edges and adhere. Stamp, color and cut flowers from white card stock using Berrylicious, Lilac Posies, Bamboo Leaves, Grape Jelly, Rose Bud and New Sprout inks. Use the Stack and Store Daubers and the Dove Blending Kit to color. Shape them with the Deluxe Flower Shaping Kit. Cut the stamens from vellum and shape. Stamp the butterflies from the Butterfly Medley Collection and color with markers. Stamp the petunia border, corner, small and large bouquets, the hanging basket and flower basket with Tuxedo Black Ink. Cut with the matching dies and then color them using 3D Paints and a paint brush and shape. Stamp the birds from the Birds and Blooms Collection with Tuxedo Black Ink, cut, color with Distress Inks, spray with Shimmer Spritz and shape. Make a pocket from the Ornate Borders and Pocket Dies. Cut a tag from the paper collection using the Luggage and Tags Die. Cut a sentiment from the paper collection and attach. Cut the hummingbirds from the Botanic Orchid Paper Collection using the Regal Hummingbird Die. Cut the leaf flourishes from the Cut Mat Create 1B Die. Glitter the flowers, leaves, bouquets, baskets, birds, butterflies, tags and hummingbirds. Decorate the house as shown using Dries Clear Glue, dimensionals and glue gun. To see more photos go here: http://www.janspaperflowers.com .

Other Products: White Card Stock, Pink Card Stock, Spellbinders Triple Tear, Brilliance Inks Moonlight White and Pearlescent Ivy, White Detail Embossing Powder, ColorBox Fluid Chalk Ink Pad - Sky Blue, Dove Blending Pen, Ribbon from my stash and die cutting machine

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Start by taking a piece of card stock 5 1/2" x 12" and score on the long edge at the 3" and 6" marks. Flip the card stock on the long edge and make a small mark at the 9" mark on both of the long edges. Score between the 9" mark and the 3" score line on the opposite edge of the card and repeat for the other 9" mare so you score an "X". You can find a template (here) to demonstrate the shape of the card. Using the Regal Borders and Pockets Die, die cut a decorative edge along the top of the card as shown and then proceed to cover the card with paper from the Classic Petunia Paper Collection finishing with another die cut from the Regal Borders and Pockets Die to dress up the top. The image in the center of the card taken from one of the pre-done images from the Classic Petunia Paper Collection finished with the basket that was stamped on White Card Stock and die cut with the matching die before lightly distressing with Tuxedo Black and attaching as shown slightly bowed out for dimension. The flower garland and flowers were stamped on white card stock with Moonlight White and heat embossed with white detail embossing powder and die cut with the matching dies. They were colored using the Stack and Store Daubers and a combination of Pearlescent Ivy and Lilac Posies inks. Before attaching the flowers they were shaped with the Flower Shaping tool and accented with Prills. The Hummingbird was stamped on White Card Stock with Tuxedo Black and die cut with the matching die before being colored with a Dove Blending Pen and a combination of Pearlescent Thyme, Sky Blue and Lilac Posies inks.

Other Products: Gansai Tambi Watercolors, Koi Waterbrush, Black Archival ink, Versamark Ink, Zing Clear Embossing Powder, Ranger Heat-it Tool, Ebosser, Martha Stewart scoreboard, MISTI, pink, black, white & watercolor cardstock & adhesive.

Project Instruction: Take 4 1/4" x 5 1/2" one piece each of pink & watercolor cardstock. Stamp the image from Classic Petunia Bouquet Cling Stamp Set twice on the bottom edge of both pieces using MISTI or any other stamp positioner tool so that both the images are on the exact place on both cardstock pieces. Use Black Archival ink to stamp on watercolor cardstock & Versamark Ink, Zing Clear Embossing Powder & Ranger Heat-it Tool to stamp & heat emboss on pink cardstock. Color them using Gansai Tambi Watercolors & Koi Waterbrush. Die cut a sliver from both the cardstocks on exact place through the stamped image using Fleur Border Basics Die. Take two 4 1/4" x 5 1/2" pieces of black cardstock and adhere one piece of pink & one piece of watercolor cardstock on both the black pieces as shown in the image leaving the black border in the middle. Add few drops of Gloss White & Dandelion Yellow Nuvo Crystal Drops to the flower centers. Adhere the complete pieces on 4 1/4" x 5 1/2" card base.

Stamp the sentiments from Small Classic Petunia Cling Stamp Set on watercolor cardstock using masking technique & MISTI or any other stamp positioner tool & Black Archival ink to create the new sentiment. Die cut this sentiment using the die from Everyday Heroes Die to create the sentiment banner. Adhere it to the card with foam adhesive as shown.

Other Products: White cardstock, dimensional adhesive, water mister, scissors, paper trimmer, die cutting machine

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Cut white cardstock to 8 1/4" x 5 1/2", score and fold at 1 3/8" and 6 7/8". Cut 6 x 6" paper from the Classic Petunia paper to a 5 1/2" x 5 1/2" size panel. Diecut the botanic window from the center of the panel. Cut the panel into half as shown. Sponge edges of panels with Berrylicious ink and attach on right and left flaps of card. Stamp 'It's Your Birthday' in Berrylicious ink onto top left of card as shown. Cut the 6 x 6" petunia panel with the garden bench to a 5 1/4 x 5 1/4" size and attach onto the inside of card. 

Stamp the small and medium set of petunias from HCPC-3785 Small Classic Petunia, hanging basket from HCPC-3787 Classic Petunia Bouquet, petunia border from HCPC-3786 Large Classic Petunia and stone pathway from HCPC-3772 Wildwood Cottage Accents stamp set in Memento Tuxedo Black ink onto white cardstock and diecut with coordinating dies. Stamp large gate from HCPC-3746 Festive Gate in Memento Teal Zeal ink onto white cardstock and diecut with coordinating die. Cut off gate posts and sponge edges with Teal Zeal ink. Use dimensional adhesive to attach gate posts onto right and left side of card.

Use the Stack and Store daubers for detailed application on the images. Use Dark Brown, Lime Pastel and Guacamole to color stone pathway. Use Dark Brown on the wire part of hanging basket. Use Lime Pastel and Guacamole to color the leaves. For petunias use Rose Coral/Berrylicious and Berrylicious/Dark Peony in alternate combinations. Use darker shading in the petunia centers. Dab a bit of the Gold stamp paint onto a non-porous surface such as clear cardstock, spritz with water to dilute and mix. Sponge the mixture onto the leaves. Make another stamp paint mixture, this time with the Magenta stamp paint. Sponge mixture over the petunias. 

Shape stone pathway, hanging basket, petunias and leaves. Using from the Sunrise Lily die, diecut 3 small flower bases and glue each one into a cone shape. Fill each cone with glue and press shaped petunias into each one. 

Attach hanging basket, petunia border, petunias and leaves onto card as shown. To finish it off, use Dries Clear glue to add a sparkle of crystal glitter.

Other Products: Prima Tag Book; Distress Inks; Picked Raspberry; Peeled Paint; Vintage Photo; Foam Adhesive; canson water paper; Papericious Cord; Rock Candy Crackle; Coffee Archival Ink; Pollens; white card stock; hole punch; Gesso; texture paste and template, gold glimmer mist; craft knife, self healing mat; sanding block; Scrapinec chipboard; Little Yellow Bicycle stickers; May Arts Ribbon and gold thread, Maya Road Trinket Pins; Border punch EK Success; Canvas; want2scrap pearls 72 count; Gold Alchemy Wax

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Click here to see a close up view of this album. Cover front and back of four chipboard tags using papers in collection, using sanding block to clean up all the edges. Make sure to punch hole at top for ring to go through before adhering both sides of paper together. Using a template and texture paste; add detail to front and back of the pages; attach photo mats to pages measuring approx 3.75 x 6.25". Edge distress edges with vintage photo. Stamp and cut out four sets of small petunia and two sets of large petunia. Color flowers and leaves. Mold using flower shaping kit. Place stamens in centers. Stamp and cut a corner leaf and color.  Lightly mold. Cut out small petunia die on canvas and place stamens in center. Stamp You Inspire me images randomly throughout the album. Attach flowers to chipboard and add some want 2scrap pearls for detail. Cut out a few tags using luggage and tag die and attach some gold cord. Cut out some pieces of paper in collection to layer on cover. Assemble cover add papers; punch a small border approx .75 x 5" from border punch and layer all over layers on top as shown. Detail pages with gold Alchemy wax. Attach stickers throughout album for sub titles on pages. Detail with Frosting powders and crystal clear. 

Other Products: Curious Iridescent - Cryogen White Paper; ColorBox Fluid Chalk Ink Pad - Cheeky and Gray Whale; Copics C00, C1, C3, C5, BG000, BG10, BG11; Want2Scrap 72 Count - Pink Rhinestones - Self Adhesive; Art Glitter Ultrafine Transparent - Pinkilicious, Silk Ivy and Tropical Rain; Ranger Stickles - Lemon Lime

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Begin by creating an A2 card out of White Cardstock. Next cut an A2 card front from the Classic Petunia Paper Collection and die cut the center using the cut Mat Create 1A Die. Sponge edge of Classic Petunia A2 card front with Olive Grove Memento Ink and then adhere to the card base with pop dots. On the die cut rectangle stamp the “Let's Celebrate” sentiment from the Small Classic Petunia Stamp Set using Olive Grove Memento Ink. Adhere die cut rectangle directly to the card base with Dries Clear Adhesive. On White Cardstock with Tuxedo Black Memento Ink stamp the small petunias and leaves from the Small Classic Petunia Stamp Set, stamp the vining petunias from the Large Classic Petunia Stamp Set and stamp the fence from the Wildwood Cottage Accents Stamp Set. Die cut all with coordinating Dies. Using HC Stack and Store Daubers and Fantastix color the leaves using Guacamole and then Lime Pastel ColorBox Chalk Inks and the dark petunias with Lilac Posies Memento Ink and add Dark Peony ColorBox Chalk Ink to the centers and for the light pink petunias use Cheeky ColorBox Chalk Ink and add Rose Coral Chalk Ink to the centers of the petunias. Cut the fence in half and color it with Gray Whale ColorBox Chalk Ink. On Cryogen White Paper with Tuxedo Black Ink stamp the bird bath from the Wildwood Cottage Accents Stamp Set and stamp the birds from the Woodsy Critters Stamp Set. Die cut with coordinating Dies. Color with Copics. Dilute Silver-Gold 3D Stamp Paint with water and using a Fantastix add mixture to watering can and the garden tools on the design paper. Cut vining petunia as shown and shape petunias, leaves, vine, birds and birdbath with Deluxe Flower Shaping Kit. Add 3D Crystal Lacquer to the water in the bird bath and allow to completely dry before adding Tropical Rain Glitter with Dries Clear Adhesive. Then adhere shaped bird to bird bath with small pop dot. Adhere all die cuts to card as shown using pop dots and Dries Clear Adhesive as needed. Using a Fantastix add Rose Coral Chalk Ink to white flowers on design paper. Add Pinkilicious Glitter to all flowers and ribbon on the hat, Silk Ivy Glitter to leaves and grass on design paper and Tropical Rain Glitter to the birds. Add Lemon Lime Stickles to centers of petunias. Finally, adhere Pink Rhinestone to upper right had corner of card front.

Other Products: 65 lb. white cardstock, heat tool, paper trimmer, pearl designer hat pins, baby breath, green ribbon, floral moss, 5 inch styrofoam ball, 3.4 x 2.5 x 3.5 inch floral foam, hot glue gun, 12 inch wood dowel, floral tape, rocks to add weight to urn, pearls, watercolor brush, Tattered  Rose and Worn Lipstick Distress Ink, Peeled Paint and Forest Moss Distress Oxide Ink, Mini-mister, SVG file Thank You For The Music, flower soft or green spray acrylic paint. 

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Click here to see a close up view of this topiary.  Create the urn from Thank You For The Music SVG file here. I used paper from the Classic Petunia paper Collection. Place a few glass decorative stones in the bottom to weight the urn. Trim the floral foam to create a snug fit inside the urn. Stuff left over foam around the edges to prevent the stones from falling out. Spray paint or cover the round styrofoam ball with flower soft. I had Flower Soft so I applied Dries Clear Adhesive to ball and then the flower soft. (Tip: You can also create your own by rubbing two pieces of styrofoam together, applying some re-inkers and allow to dry).  Apply floral tape the full length of the dowel. Apply one end of the dowel half way inside the styrofoam ball and the other into the base floral foam. 

Stamp the small and large Classic Petunia flowers on white cardstock using white embossing powder. Heat set. The petals were watercolored using Tattered Rose and worn Lipstick Distress Ink.   The leaves were watercolored using Peeled Paint and Forest Moss Distress oxide Ink. The petals were lightly misted on the back for easy molding and shaped using the Deluxe Flower Shaping Kit. 

The flowers were layered and adhered with Designer Dries Clear Adhesive. 

Sprigs of Baby Breath were applied using a hot glue gun. Small floral bows were placed in locations around the ball. The flowers were applied to the topiary using pearl hat pins. 

Floral moss was applied around the top of the urn. For the finishing touch, tie a bow around the stem at the base of the floral topiary.  

Other Products: Paper trimmer, foam glue dots, magnet, Stampin Up ink in Melon Mambo, Early Expresso and Garden Green, glue dots, 3 1/2 x 5" notecards with envelopes to fit the notecards (Stampin’ UP!’s Whisper White Note Cards & Envelopes used), pearl embellishment

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Inspiration for this project came from My Sisters Scrapper and a step by step video of this card clutch can be located here. Take one sheet of 12 x 12 inch decorative paper and decide which side you want inside and outside for your clutch purse. With the right side of the 12 inch decorative paper down, bring the corners together and fold the paper in half diagonally to form a triangle. From the fold, turn up approximately 1 inch and press the fold along the bottom. Flip the triangle over and turn the 1 inch fold to the other side. Press along the previous fold line to reinforce it. Open up the paper to the inside of the clutch purse. It is easier to continue if your turn the paper so the fold lines are in the vertical position. Bring both corners with folds up to the center of the paper. Fold in a mountain valley style. The center fold will be a mountain fold.. Close the clutch purse and fold back the corner. Add a magnet closure to the inside of the clutch purse. Stamp one small, one medium and one large size petunia with Stampin Up early espresso ink. Stamp two leaves with Stampin Up garden green ink. Use Stampin Up Melon Mambo ink and a stack and store dauber to color the three flowers. Shape the petunias according to the tutorial on how to shape the petunias. Place Hot Mama prills in the center of each flower with designer dry clear glue. Add a spritz of glue to flower tips and sprinkle shell white glitter on the tips of each flower. Attach completed flowers to the outside of the clutch purse. Place pearl embellishment in the middle to simulate the closure.

Other Products: Pink Cardstock, white cardstock, Liquitex Modeling Paste, Stencil, Hot Glue, Scor-Tape

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Watch this video for making the box here. Once you make the box and have it lying flat, use the modeling paste and stencil the design. Once dry you can tape it together and add the design paper on the box top. 

Next stamp the petunias in Lilac Posies onto white cardstock and diecut. Stamp leaves in Rich Cocoa onto white cardstock and diecut. Color the petunias with Lilac Posies. Color the leaves with Bamboo Leaves and New Sprout. Shape the flowers and leaves. Add glitter to the petals and the prills to the center of the flowers and set aside to dry. When dry you can decide where you like the flowers and use hot glue to glue them into place. The box is finished.

Other Products: White Card Stock, Memento Grape Jelly, Small Foam Dots

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Cut a piece of white card stock 6 x 12", score at 3 and 6". Cut another piece of white card stock 6 x 6", apply glue to the lower part and attach to the 3 inch score line as shown. Adhere 2 of the 6 x 6 card fronts from the Classic Petunia paper to the top and bottom parts. Cut the center of the oval out, add D-Dots to the back and adhere to the top 6 x 6. Stamp all the flowers, leaves, and vine on white card stock using the Black Memento ink. Color the leaves with the Bamboo Leaves, color the flowers with both the Orchid and Grape Jelly, color the vine with the Bamboo Leaves, and Grape Jelly. Adhere the vine and some leaves and flowers to the bottom, adhere the other leaves and flowers to the top. Cut the sentiment strip out and adhere to the center of the oval. To finish add glitter to the leaves and flowers.

Other products: Heavy weight white card stock, White card stock, Glitter, Liquid Pearls, Dyed seam binding (using Wilted Violet Distress ink refill)

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Card is 6 x 6" size. Start with Heavy weight card stock (one 12 x 6" piece and two 6 x 3"). On long side, score at 1 1/2, 3, 9 and 10 1/2". Fold like an easel card on both sides leaving a 6" space in the center (the two 3 x 6" pieces will be glued to the first 1 1/2" section-flush on left outside edge and the 10 1/2" section flush with right outside edge). 

Sponge a piece of 6 x 6" decorative paper (with purple dye ink) and glue to center. Die cut Raindrops on Roses die X 2 out of white and add to back panel. Cut out decorative designed rectangle from Classic petunia paper (about 2 3/4 X 4) and stamp Happy Birthday (from Small Classic Petunia stamp set) then glue to a light green piece of decorative paper and glue to the 6 X 6 inside panel. Cut two pieces of decorative paper 2 7/8 X 5 7/8" and glue to the 3 X 6" card stock pieces. Cut gate at gate opening/latch, weave ribbon (dyed seam binding-crinkled) and glue gate pieces to the front two 3 X 6" pieces (be sure not to glue across opening). Make sure ribbon is long enough to open all the way without pulling ribbon out of the gate. Make an extra fluffy/crinkly bow with more seam binding to add to gate above tied bow for more fluff (instead of having to retie a triple bow each time card is opened). 

Stamp and die cut Classic Leaf, Blossoms from Birds and Blossoms, Leafy Branch, Small Classic Petunias, Petunia Bouquet, and Regal Hummingbirds. Color Hummingbirds and flowers in basket. Sponge color on basket, and Petunia corner along with the classic leaf, Petunias and blossoms. Form flowers and leaves then add Prills.

Add Liquid Pearls to flower basket. Use a piercing tool to pierce small hole in center of basket then string purple thread to fashion a "rope" hanger and attach basket to top right side. Add classic leaf to left side being sure to keep clear of ribbon (make sure ribbon can still move) then add blossoms and some extra Prills (as if small flowers). Add Petunia corner to top left and then add flowers and leaves and white Prills in various places. Stick foam tape to back of Hummingbird and attach to card.

Other Products: Archival Ink-Fern Green, Distress Ink-Peeled Paint, Festive Berries, Super fine Silver embossing powder, prills, Diamond Dust, Lindy’s magical, pearls

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: This Celebration card measures 6” x 8”. It’s a 3-fold card. Background of the front is made with Classic Petunia Bouquet. Stamp and decorate using silver heat embossing powder and spread silver glitter. I also added some sequins and then gave the layers of some dies and used Petunia Basket Stamp from Classic Petunia Bouquet set, and made composition of lovely flowers.

I decorated the front of the card with purple colored flowers made from Large and Small Classic petunia stamp and die with Diamond Dust. Layer petunias onto Eyelet oval die and attach onto front of card. Add pearls onto Eyelet oval. Add sentiment.

For the inside same steps were repeated with some paper borders and tags and sprinkles of colors using Lindy’s magical. Card was finished with border dies to give the card a sparkling celebration look.

Other products: Black Archival ink, Distress Ink Twisted Citron, Prima Stencil Royal Menagerie, Smooth White Cardstock, Faber Castell Polychromos, white heat embossing powder, vellum, Versamark ink, Heat Gun.

Instructions: The ready side fold card measures 6" by 71/2". Stamp 2 sets of Classic Petunia Bouquets with black archival ink and cut it using it's coordinating die. Paint the bouquets with Faber Castell Polychromos. I have used bright wine shades like 225 Dark Red, 142 Madder, 124 Rose Carmine, 123 Fuschia for flowers and 166 Grass Green, 171 Light Green, and 173 Olive green for leaves. I have highlighted the flowers using a white gel pen. For top panel, I have used 5" by 7" white cardstock, prepared the background by smooshing Citrus Citron and then splattered lightly diluted black gesso. Once happy with the background, score the whole panel at 1/8". Layer the panel on the card base and apply adhesive that dries clear. Sprinkle little Crystal Clear Glitter. Cut two laces from white cardstock from Classic Border Basics Die. Arrange them on the top panel as shown. Assemble the card with previously colored Petunia Bouquets. Finally, add white heat embossed butterflies and sentiment.

Other Products: Paper: Neenah Solar White, 12" x 12" White; Inks: VersaFine Onyx Black; Accessories: half pearls, water mister, glue dots, pencil, Lavender Seam Binding, Bow-Easy Tool, Scor-Tape, Scotch Mounting Tape, mineral spirits, paper stumps, Prismacolor Pencils: Lavender Lace, Parma Violet, Violet, Dioxazine Purple Hue, Page Sage, Prussian Green, Grape Jelly Memento Ink

Instructions: Card measures 6 1/4" x 6 1/4". Cut white cardstock 6 1/4" x 6 1/4" two times. Score edge of one of these at 1/4" on one side, add scor-tape above score line and adhere the two pieces together to create the card base. Cut green designer paper from the Classic Petunia Paper Collection 6 1/4" x 6 1/4", ink edges with Bamboo Leaves Ink and adhere to card base.

 Cut card panel pictured from designer paper and die cut center using the Large Rounded Rectangle Die from the Cut Mat Create 2A Set. Ink edges with Grape Jelly Ink and set "frame" aside. 

Stamp petunia bouquet from Classic Petunia Bouquet Set and small petunias and leaves from Small Classic Petunia Set on Solar White with Onyx Black. Color images with pencils and mineral spirits. Die cut with matching dies from the Classic Petunia Bouquet Die and Small Classic Petunia Die Sets. Shape one small flower and leaves by misting the backs with water and shaping with the Deluxe Flower Shaping Kit. 

Adhere bouquet flower image to "frame" as shown using Stamp Mat Pad under the outside leaves. Add doubled Stamp Mat Pad under flowers that will be inside the "frame". Place "frame" over the mat and lightly pencil the lower right corner to mark where the "frame" edge will be to give you a guide of where to stamp the sentiment. Stamp the sentiment from the Heartfelt Expressions Set with Onyx Black as shown. Add "frame" over green mat using Stamp Mat Pad.

 Make a 3-loop bow using Lavender Seam Binding and Bow-Easy Tool, then adhere to top right of card using glue dots. Add small flower to bow center using glue dots. Add Lavender & Lace Prills to flowers centers using Designer Dries Clear Glue. Add adhesive pearls as pictured.

Other Products: White card stock, Purple card stock, Distress ink Seedless Preserve, artificial pollens, frosting powder, Archival jet black ink, Card Creator Windows of Memories Special Occasions by Marisa Job Etched Dies SKU: S6-106

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Cut a window die cut in white card stock using the Marisa Job Spellbinders die. Use designs from the pattern paper and cover the open windows. Distress the edges with Seedless Preserve Distress ink. Adhere on a white card stock 6 " x 6". Distress the edges with Seedless Preserve ink. 

Stamp the Petunia flowers in many sizes from the petunia stamp set using Jet black ink on white card stock. Cut with coordianting die. Stamp the leaves in Cottage Ivy ink and cut with coordinating die. Colour the flowers using sponge daubers with pink and purple inks. Shape the flowers on the flower shaping tool kit. Colour the leaves with Bamboo leaves ink and shape on Flower shaping tool kit. Apply clear glue on the edges of flowers and add frosting powder. Let it dry. Add prills and pollens in the centre of the flowers. Stamp the smallest flower from Classic rose stamp set and cut with coordinating die. Shape into flowers and add pollens.

Stamp the petunia hanging basket image in white card stock using Jet black in. Colour using memento inks and daubers. Adhere on the right side of the card. Add small flowers of petunia along with small filler flowers. Arrange more petunia flowers and leaves at the base. 

Cut out a design with sentiments and add to card as shown. Cut 3 pieces of swirl die cut from the Cut and Mat die and distress the edges with seedless preserve ink. Add prills randomly around the sentiment. Mount the card panel on a purple card stock 6 1/4 " x 6 1/4 ". Add 3D foam tape at the back. Adhere on a white card base 6 1/2" x 6 1/2". Finish the card by distressing the edges. Add the distressed swirls on the top and base as shown.

Other Products: Pilot Gold Marker, Spectrum Noir Markers TN3;LG4;PL1;BP1;FL3, Ribbon

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Begin by trimming a piece of White Card Stock 4 x 8, use the Regal Borders and pockets die and trim the top of the tag off. Layer a piece of the Green paper from the Classic Petunia Paper pack that you have trimmed the top of making sure it is 3 3/4 x 8". Cut the Window die out of White and place in the center. Use the oval part of the die and cut the piece of paper out that has the well and adhere using the foam strips. Stamp the Classic Petunias, Hummingbirds and bouquet all on White card stock with the Black ink. Color every thing with the Spectrum Markers, cut out, shape and adhere to the tag as shown. Use the Luggage and Tags die and cut out the sentiment tag, add to the tag also. To finish add Glitter to the Leaves, Flowers and Hummingbirds. Add the Crystal Drops to the center of each flower, around part of the Oval and around the Green paper. Add the Bow to the top.

Other Products: Canvas, white gesso, Texture paste, Soft Matte Gel, Stencil, heat gun, white embossing powder, Embossing Ink, Resin Frame, Metal Charms, Color Spray, My Mojito Green, Iridescent Spray, twine, beads, dimensional adhesive, Glue Gun, Glossy Accent, scissors, heat tool, Distress inks, Barn Door, Vintage Photo, Archival Black, Pine Needles

Watch tutorial in the link to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: Start by taking a blank canvas and apply white heavy gesso. Use stencil and texture paste to create the first layer. Spray splashes of mojito green and iridescent orange on the canvas with water spray in between. Heat dry the base.

Stamp 2 set of petunias from Small and large Classic Petunia using archival ink and pine needle for the leaves. Using the coordinating dies, die cut all the stamped images. Use the Stack and store daubers to shade the flowers. Finish the flowers by stacking each other and lay it flat and add prills at the center.

Stamp and die cut the petunia classic bouquet using archival ink. Color the images using water color and distress ink. Arrange the resin frame on one side of the canvas. Place the color petunia bouquet on one side of it using hot glue. Add prills, glitter, stamen as desired to complete the composition on the canvas panel.

For the sentiment heat emboss the sentiment on a black card stock and dry emboss using heat gun. Place the sentiment at last once composition is complete.

Other Products: Spellbinders A2 curved borders one, Scrapiniec big sign - laser cut chipboard, white pearlised cardstock, green cardstock, 3D foam tape, Foamiran, Waterproof pigment ink, floral stamens, hot glue gun, Liquid glass

Instructions: To create this lovely Birthday Card I used beautiful Classic Petunia Paper Collection. I choose one classic looking paper to make sure that paper won't determinate Design. To add some details to composition used Classic Petunia Bouquet stamp and Classic Petunia Bouquet Die. I stamp on paper and colouring it using daubers with pigment inks. To create these amazing flowers I used: The bigger flowers: Large Classic Petunia stamp & dies. To make flowers at first I taken foam sheet 0,8 mm thick and stamp with water resistant ink. I cut it out using die and ink it with alcohol base ink and pigment inks in both sides. I heat up ordinary iron and I heat up petal and form in my hands. I made double layered flowers. To make stamens I used die from collection, I use this same foam, I hit up foam and roll it up in my hands. To finish off I used white glitter. To create more interesting details I used classic Petunia bouquet die & stamp collection. I stamp in firm paper and colouring it using daubers with green, brown and purple alcohol basis ink. To create rain drops I used liquid glass.

Other Products: Chameleon Pens (NU3, VO4, GR4, GR1), ColorBox Ink (Thistle, Violet), Dew Drops (Clear), Iris Beads (Clear), Paperlicious- Crystal Clear, May Arts Ribbon (Rhinestones, Ivory Burlap String), Hot Glue, Scrapbook Adhesives by 3L (White Photo Corners, Dual Tip Glue Pen, 3D Foam Squares, Thin 3D Foam Squares, EZ Runner Grand), Corner Rounder, Cardstock (White, Green), Sequins, Gems, Pearls

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: Click here to see a close up view of this layout. The purple bordered patterned paper is your background. Cut the purple patterned paper down to around 9 x 9" and round the corners. Adhere to the middle of the layout. Cut a piece of white cardstock that is 2.5 x 8.5" and round the bottom two corners and adhere to the bottom portion of the purple patterned paper. Cut a strip of the dark green patterned paper that is 2 x 12". Cut a piece of the pink patterned paper that is 0.75 x 12. Adhere these layers together and then to the layout, just below the middle. Add the rhinestone ribbon along the middle of the layered border.

 Find and cut out the green mini tag, the mini framed green journal block and the purple “Life's Beautiful Moments” strip. Set aside. Stamp and die cut 5 of the Classic Petunia Bouquet basket images. I added a little bit of colour to the images using a neutral Chameleon pen. Adhere these below the layered border. This creates a scalloped border look that I love. 

Mat your photo in white and green cardstock, and add white photo corners to the photo. Adhere to the layout using 3D foam squares to the left hand side of the layout. Add the mini tag just above your matted photo using a thinner 3D foam tape and add a twine bow. Add the mini journal block to the left of the matted photo. Die cut one of the Arianna Lace die from white cardstock and adhere to the right hand side of the matted photo.

 Stamp and die cut 2 sets of the largest Large Classic Petunia flowers and leaves. Stamp and die cut 2 sets of the smallest Small Classic Petunia flowers. Stamp and die cut 2 sets of the larger Small Classic Petunia flowers. I added colour to the leaves using Chameleon Pens. I added colour to the flowers using ColorBox inks and Heartfelt Creations daubers. Shape and assemble the flowers and leaves. Using a clear drying liquid adhesive I added Crystal Clear glitter to the petals of all of my flowers. Let dry. Using a liquid adhesive I added dew drops and clear beads to the middle of the flowers. Let dry. Adhere one of the smallest petunias to the left of the matted photo. I also added sequins, gems and pearls around the flower. To the right of the photo I added the largest petunia and a small petunia, as well as other embellishments. I added a medium and a small petunia to the layered border. At the bottom of the layout I added the other medium petunia and then arced the title strip over top of the flower.

Other Products Used: Papers used: Card Stock: Purple Bazzill, Crafters Companion Centra Pearl White-hint of gold 300gm, Aquarelle paper 170 gm. Ranger: Bone folder, Paper distressing tool, Scissors, Ruler. Other: Zig clean colour real brush ink Pens:080 and 043, Black Archival Ink, Hot glue gun, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, Purple organza ribbon, Lilac lace trim, Misti, Zutter bow maker 

Watch this tutorial to see how to shape the petunias https://youtu.be/KOy_qNB9OAk.

Instructions: This tent fold card when finished measures 8.25 x 5.70" ( 21 cm x 14.5 cm ) Make the tent fold card base to measure 8.25 x 5.70" ( 21 cm x 14.5 cm ) from the 300gm card stock. Cut the purple card stock card to fit the base front. Cut the chosen design paper from the paper collection a little smaller. Distress the edge of the design paper with the distressing tool and adhere to the purple card stock with the double sided foam tape or double dots. ( all the design paper layers are done this way ) Taking the purple card stock again cut 7.68" x 5.31" (19.5 cm x  13.5 cm) Find the contrasting design paper for the front, cut this a little smaller then adhere all to the card base. Adhere the lace and ribbon across the card front. Prepare the embellishments by stamping, die cutting and colouring. ( 3 flower sets, three leaf sets, four corners and one boarder ). Apply the glitter to the flower stamens, when dry adhere to the flower centres. Make the double triple bow from the ribbon. Taking the purple card stock and the HCD1-7121 die set cut the words thank you 4 times and from the design paper once. Trim and adhere together adding the design paper as the top layer. Using the HCD2-751 die set, cut four leaves from the purple card stock. Taking the design paper stamp the sentiment Lets celebrate and cut to a banner. Adhere to all to the card front. I used the hot glue gun as it sets faster. Taking the die set HCD1-7121 cut the letters to form thank you at least 4 times. Trim so the letters become single letters. Adhere the first layer to the card front then add the rest of the layers. This is so the letters are easier to layer and adhere. Once all is secure and dry apply the crystal lacquer to the words.

Other Products: Styrofoam egg, Clay, Ribbon, wire, paper pen Salmon, Cheese cloth, Glue gun, Dark brown acrylic paint, Spectrum marker yellow GB5, Distress ink fossilized amber.

Watch this tutorial https://youtu.be/KOy_qNB9OAk to learn how to shape the Classic Petunia.

Instructions: To see a close up view of this egg click here. First glue the 2 half eggs together as one and cut a little piece of the bottom so that it will stand, then cover the whole egg with clay as smooth as you can, let it dry, in the mean while you can stamp, and cut and color the petunias. I used yellow tones, but you can do your own color! When the egg is dry you can paint it with dark brown acrylic paint, let this dry very good!

If the egg is dry you can start decorating it, first I made a bow, glue this down with the heat gun and then I put some cheesecloth in front of this, now you can put all your flowers on it in a nice arrangement, at the end I curled the wire around a pencil and stuck it in between the flowers, at the end of the wire you can glue a butterfly, and also one on the flowers. I cut the butterfly out of the petunia collection.

Other Products: White Cardstock, Dimensional Adhesive, Scissors, Paper Trimmer, Die Cutting Machine

For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Cut white cardstock to 12 x 4 1/4" size, score and fold at 6" to create card base. Cut a yellow 6 x 6" panel from the paper collection to 4 1/4 x 6" size. Sponge edges of panel with Vivid Chartreuse ink and attach onto card base. Diecut the Intricate Swirl Frames Die from white cardstock. Trim off the outer decorative edges with a paper trimmer. Sponge the straight edges with Sunflower ink. Use dimensional adhesive and glue to attach both frames onto the card as pictured.

Stamp the coneflower from HCPC-3826 Blossoming Coneflower and coneflower from HCPC-3828 Garden's Edge Coneflower stamp set in Archival Black ink onto white cardstock and diecut with coordinating dies.

Use the Stack and Store daubers along with the following inks to color the images. Use the Buttercup ink at the bottom tips of coneflower petals. Next add some Vibrant Fuchsia to petal centers. Add a pop of Cactus Flower to the innermost part of part of petals, right next to the cone. Use Vivid Chartreuse on the cones, along with a pop of Buttercup ink. For all the leaves, use Vivid Chartreuse and Leaf Green ink. Cut 'Special Thoughts' sentiment from the paper collection and sponge edges with the Vibrant Fuchsia ink.

Use a scissors to cut in between some of the coneflower petals to allow for more dimension. Use the Deluxe Flower Shaping kit to shape the coneflowers and leaves. Use glue and dimensional adhesive to attach everything onto card as shown. Use Dries Clear glue to add a touch of glitter over the flowers, leaves and rest of card as desired.

Other Products: Foam tape

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Cut a piece of white cardstock 6" x 12", score at 6" along the long side and fold to create a 6" x 6" card base. Cut a 6" x 6" panel from the patterned paper and using the cutting edge of the Classic Border Basics die cut the edge at the top of the paper as shown. Cut an eyelet edge from the pink paper and adhere to the back of the bottom half and then adhere both the top and bottom pieces to the base card.

Die cut the circle image from a panel from the patterned paper. Cut an eyelet edge circle out of the pink patterned paper and using the next size down plain die cut a circle out of the green patterned paper and adhere to the pink circle on the outside edge only. Using the next size down cut a frame out of the green and pink circles. Adhere the frame to the card as shown with foam tape and then adhere the circle image to the centre of the frame.

Stamp 3 images from the HCPC-3828 Garden's Edge Coneflower Stamp set in Fern Green ink on white cardstock. Colour the images with Leaf Green ink and die cut with the coordinating die. Add Tutu Pink, Heart of Gold and Minnie Pearls Prills to the leaves on the images and then trim and adhere around the bottom right of the frame.

Stamp four coneflower images from the HCPC-3826 Blossoming Coneflower Stamp - two in Fern Green, Vibrant Fuchsia and Sepia inks and the other two in Fern Green, Monarch Orange and Sepia inks on white cardstock. Colour the stems and leaves in Leaf Green ink, the fuchsia flower in Vibrant Fuchsia and the orange flower with Butterfly inks and then die cut with the coordinating die. Shape with the Deluxe Flower Shaping kit. Trim the petals of one of the fuchsia and one of the orange/yellow flowers and adhere to the other flowers for more dimension. Add Espress-O Yourself Prills to the heads of the flowers. Add Crystal Clear to the flowers and adhere around the bottom right of the frame over the leaves.

Stamp several coneflower images from the HCPC-3828 Garden's Edge Coneflower Stamp set in Fern Green, Vibrant Fuchsia, Orange Monarch and Sepia inks on white cardstock. Colour the stem and leaves in Leaf Green ink, the fuchsia flowers in Vibrant Fuchsia and the orange flowers with Buttercup inks, and the head with Peanut Brittle inks and die cut with the coordinating die. Shape the flowers and add Espress-O Yourself Prills to the heads. Trim the petals of some of the flowers and adhere them to the other flowers for more dimension. Add Crystal Clear to the flowers and adhere around the bottom right as shown.

Stamp 2 coneflower row images from the HCPC-3828 Garden's Edge Coneflower Stamp set - one in Fern Green the other in Orange Monarch ink on white cardstock. Colour the stem and leaves in Leaf Green ink, the flower in Buttercup ink and the head with Peanut Brittle inks and die cut with the coordinating die. Trim the yellow heads and adhere to the green image. Shape the flowers and add Espress-O Yourself Prills to the heads. Add Crystal Clear to the flowers and adhere to the card around the bottom right to fill in the gaps as shown.

Stamp the butterfly image from the HCPC-3824 Fluttering Butterfly Stamp in Vibrant Fuchsia ink on white cardstock. Colour the image in Vibrant Fuchsia ink using the Stack and Store daubers and die cut with the coordinating die. Sponge the body with Tuxedo Black ink and adhere to the top left of the frame as shown.

Trim the sentiment from the paper collection and adhere to the card on the bottom left as shown.

Other Products: Flat back Rhine stones, butterfly (internet), Miniature train sands, Pearl pen creme, White marker, Distress Ink Vintage photo and Fossilized Amber, Glue gun, Big shot, White cardstock, Black Fine marker, Glitter Glue, pencil, Foampads, scor-pal, Stickles, Xacto knife.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Finished size is 5 3/4 x 6 x 2 inches. Cut 2 pieces of white cardstock at 5 3/4 x 10 inches, score at 2 inches on both ends. Cut another piece of white cardstock 5 3/4 x 8 inches, score at 1 inch on each side. On one of the 10 inch cardstocks, die cut the large circle in the center, on the 8 inch cardstock, die cut the second largest circle out in the center. Choose a panel from the backyard blossoms paper pad and trim to 5 3/4 x 6 inches. Fussy cut a cottage from the Lush Lilac paper pad. Use an Xacto knife to cut around a few flowers from the Backyard Blossoms panel, and tuck the cottage in behind it. Adhere this panel on the solid cardstock, and fold the scored sides forward. This will be the background.

Diecut the Frame A Card die on white cardstock and trim one side off and adhere it to the backside of the 8 inch cardstock, so its visible from the left side of the circle. Fold the 1 inch sides of this panel back, adhere the sides of this panel onto the sides of the background, creating dimension. Take the 10 inch remaining cardstock, with the large circle diecut, and fold those sides back. Adhere those onto the sides of the background. This will create the diorama, now accessories as desired.

Stamp three medium peonies in Rhubarb Stalk on white cardstock and die cut with the coordinating die, then color the center with Peanut brittle and the tops with Vibrant Fuchsia. Shape the flowers with the shaping tool set and adhere together creating on large flower. Stamp 2 of the extra small peony and 3 of the small peony with Rhubarb Stalk and die cut. Color the center with Peanut Brittle and the rest with Rose Madder. Stamp 4 Lilac petals in Rhubarb Stalk ink onto pink designer paper from the coneflower collection and die cut. Shape using the Deluxe Flower Shaping kit and insert stamen in the centers.

Stamp assorted coneflowers with Rich Cocoa ink on white cardstock and color them with the Vibrant Fuchsia ink or Fossilized Amber with Tangelo in the center. For the leaves I used a mix of the Bamboo Leaves and Leaf Green. Apply glue to the centers of the coneflower and add miniature train sand, allow to dry. Finish coneflower by adding a while line on the petals with a white marker.

For the rest of the greenery and flowers use the Rain Boots and Blossoms collection and the Backyard Blossoms, stamp them on white cardstock with the Rich Cocoa ink and color them with a mixture of Bamboo Leaves and Leaf Green, Die cut all the leaves and flowers with the coordinating dies and shape them with the Deluxe Shaping tool set!

Assemble as shown. Finish with Rhinestones and adding Pearl Pen drops on to desired pieces.

Other Products: 3D foam tape, Green alcohol based ink, Waterproof black ink, hot glue gun, purple pigment ink , pencils

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.

Instructions: Create a 6 x 6" card base from white pearlised paper. Cut a piece of paper from the Backyard Blossoms Paper 5 3/4 " x 5 3/4 " and adhere to the card base using Dries Clear Adhesive. Cut the Regal Borders and Pockets Die from white cardstock two times to create a beautiful shape. Line up another piece of the same patterned paper from the Backyard Blossoms collection and adhere to the fancy borders with dries clear adhesive. Adhere to the card base using 3D foam tape for dimension.

Stamp the Camelia Carnation Cling Stamp Set on foam paper with waterproof black ink and cut using the coordinating dies. Colour with soft oil pastels (209). You will need three petals for each flower. Stamp the Camelia Carnation Cling Stamp Set three times so you have enough petals to create one large flower and two medium flowers.

Use an iron or heat gun to heat the petals and then shape using your fingers. Sponge the petals with dries clear adhesive and sprinkle with Ultrafine transparent glitter. Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the black stamens from the Bright Bead - Medium set. Add a little hot glue to the underside of the flower to adhere.

Stamp the leaves using Classic Rose Vines Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade use this same ink and shape. Stamp the leaves from the garden's Edge Coneflower Cling Stamp Set and the Backyard Blossoms Cling Stamp Set on white paper with the StazOn Olive Green and cut out with the coordinating die. Adhere the flowers and leaves to the card using a hot glue gun.

Other Products: Prisma Color Pencils PC 956, PC931, 743, PC929, PC973, PC908, PC922, 738 1/2, Odorless Mineral Spirits, Paper Stump, Home Made Glitter Glitz, White Cardstock, Vintage Photo Distress Ink, Seam Binding Scor-Tape, Dimensional Tape

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Click here to view a larger photo of this project. My tag size is 5 X 8 3/4". I made my tag by cutting out the dimensions on two pieces of cardstock and gluing them together. Cover with a piece of the paper collection and using Vintage Photo Distress ink to go along the edges of the tag. Add Crystal Clear and set aside to dry. Stamp and cut out the fence and shade with Vintage Photo Distress Ink. Use dimensional tape and adhere to the tag. Stamp, color and cut out the flowers and plants. Add the glitter glitz and set aside to dry. Once dry add some Crystal Clear and again let dry.

When the Crystal Clear is dry, decide on placement for the flowers and glue them down. Cut out the ticket and a piece of the paper to back the ticket and using dimensional tape, adhere to the tag front.

Tie a double bow and use Scor-Tape and glue to adhere to the top of the tag. The tag is ready to go.

Other Products: Distress Ink in Peeled Paint, Archival ink - Chrome Yellow, fine string, 2Crafty Chipboard Doily, white paint, script stamp, foam dots,

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Cut white cardstock 5.5" X 11". Fold in half. Diagonally score the front panel of the card from the top outside corner down to the spine. Cut 1 pink panel and 1 yellow patterned panel, as shown, from the "Backyard Blossoms" paper pad and also a sentiment and I tag. Trim both panels to 5 1/8" square. Diagonally cut the yellow panel in half from corner to corner. You will need to trim a small amount off the longest edge of the yellow panel so that a small border of the white cardstock will show through. Now adhere these panels to the card.

Stamp 1 yellow flower from the "Garden Edge Coneflower" stamp on white cardstock using Peeled Paint and Chrome Yellow inks. Colour with same inks and die cut with coordinating die. Stamp 3 pink flowers from the "Garden Edge Coneflower" stamp on white cardstock using Peeled Paint and Vibrant Fuchsia inks. Stamp 1 pink tall coneflower from the "Backyard Blossoms" stamp set using Peeled Pain and Vibrant Fuchsia ink on white cardstock, color with same inks and die cut.

Using the Vibrant Fuchsia ink, stamp 2 small pieces of floral foliage from the "Backyard Blossoms" stamp set. Colour with same inks and die cut. Stamp 2 green sets of leaves from the "Classic Rose" stamp set using Peeled Paint on white cardstock, colour with same ink and die cut.

Apply some glue to the coneflower centers and the pink flower sprays and sprinkle with glitter. Set aside to dry.

Paint chipboard doily in 2 coats of white paint or alternatively heat emboss it in white. Trim sentiment slightly, cut a small "V" either end, ink edges in Vibrant Fuchsia ink and shape this strip with your fingers. Tie a large bow using 4 strands of fine string or any suitable twine will do.

Adhere tag to front panel of card so that it is sitting up beyond folded edge. Glue multi stranded bow to tag.

Cut some of the foliage pieces in half & adhere all flowers & foliage to card front. Adhere using foam doets on desired flowers. Be sure to stagger the flowers.

Adhere white doily with foam dots onto the inside pink panel of the card about an inch in on either side. This is what holds the card open. Adhere one pink flower onto doily and adhere greeting down using foam dots.

Other Products: Ribbon, Foam tape, Copic Markers: E53, E33, E35, C01, C03, C05, B00, B01, R30, R21, YG03, YG23, Y38, Y04, R81, R83,R22, V01, V12, V15

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Card size: 6 1/4 X 61/4". Cut one 6 X 6" panel from the Backyard Blossoms paper collection, cut the center out and use it on the inside back as a backdrop for the scene. Use the outside section for the outer frame of the box. Sponge all the edges using Deep Purple very lightly. The sides of the box and the inside bottom "tabs" are covered in more of the decorative paper. Use the plain die from the Fleur Border Basics to make rolling landscapes on the "tabs". Once the box is put together, cover the back of the box to cover the joining tabs.

Stamp in Tuxedo Black, die cut and color trees for the background, critters, blossoms from both the Woodsy collection and the Backyard Blossoms collection, coneflowers (including the corner border), Dogwood, Wildwood Blossoms and leaves. After coloring with Copic Markers, form all flowers including coneflowers from the back and add Prills to the coneflower centers using a mix of Go Man Go and Express-O Yourself, add I Cannot Tell A Lilac Prills to Dogwood blossoms and Go Man Go to tiny Wildwood Florals. Stamp the sentiment with Deep Purple onto some matching sky decorative paper and mat with some orange paper from the Butterfly dreams paper. Use foam tape to pop up from the background panel.

Start from the back and work forward adding trees, flowers, animals smaller to larger so have proper dimension in size. Use the larger coneflowers on the frame and fill in with wildwood Blossoms. At the top, use the dangling Dogwood branch cut into pieces and add some regular leaves from the Window Box Fillers. Now add the smallest blossoms from the Flowering Dogwood and the Wildwood Florals on top of and in addition to the blossoms on the Dogwood branch. End with curling some ribbon and bow in and around the top Dogwood area.

Other Products: chipzeb, sparkling dust, cord, strip light , lace trim, pearl string, Blings, white floral wire

For more tips on creating flowers with Sweet Peony collection, watch the tutorial https://youtu.be/L9_MLkvpGPQ.

For more tips on creating with the flower shaping molds, watch the tutorial https://youtu.be/KDbdzC0MnAI.

Instructions: Project size : 9"x7" open card size 9"x17". For the base card I take thick white cardstock of 9"x 17". Score it on 1", 2", 9"and 10". Choose a pattern paper from Sweet Peony Paper collection for the front of the card and one from Singing in the Rain paper collection for inside the card. Cut 3 pieces 9"x1" strip and 2 pieces of 9"x7" from each pattern paper. Distress the edges using Magenta Hue ink and adhere it on both side of card. Create a magnetic closing using disc magnets.

Stamp the flowers from large Sweet Peony stamp and Small Sweet Peony stamp using Magenta Hue ink. Cut the flowers using coordinating dies. Color the flowers with same color and shape with groove tool. Also create some fillers. Stamp the leaves using Leaf Green Archival and color them with Leaf Green and Library Green ink and shape with ball tool.

Front of card: Take a pattern paper from Sweet Peony Paper collection and cut in 3.5"x7". Distress the edges of the pattern paper using scissor. Glue border die cut on both side of pattern paper and adhere it on the card diagonally, using foam tape to add dimension. Cut two tags from the same collection and tie a cord. Adhere the tag using foam tape. Make some paper rolls and glue them on the card base. Cut a sentiment card from the Heartfelt love paper collection using oval die. Also cut 6 pieces of oval frame from white cardstock. Glue all frames together to create a thick frame. Apply clear drying glue on the frame and sprinkle some Frosting Powder. Glue the frame over the sentiment card and adhere it on the card base as shown. Heat emboss the chipzeb with silver embossing powder. Arrange the chipzeb, flowers and leaves as shown. Make some swirls with white floral wire and glue. Cut 2 sentiment tickets from Sweet Peony Paper collection and adhere on the card using dimensional tape.

Inside of the card: Create a pocket using delicate borders basics die from white cardstock. Choose a pattern paper from singing in the rain paper collection, diecut it with the coordinating plain die. Distress the edges using Leaf Green Archival ink and adhere it on the pocket. Cut a sentiment card from the Heartfelt love paper collection and glue it on the pocket. Tie a bow from the white cord and glue it on the card. Create a 7"x5" side fold card with white cardstock. Adhere a pattern paper on the card from Sweet Peony Paper collection. Cut a sentiment card from the Heartfelt love paper collection using oval die. Also cut an oval frame with white cardstock. Glue the sentiment card on the card base and also glue the frame over it. Glue 2 water droplets using clear dry glue.

Create a 6"x6" shadow box with white cardstock using circle die. Choose a pattern paper from Sweet Peony Paper collection and adhere it on the shadow box. Cut a frame from white card stock using circle die and glue it on the shadow box. Inside of the shadow box paste the picture and arrange the strips. Glue border die cut on the edges of the shadow box. Glue the shadow box on the card base. Add a lace trim below the shadow card. Tie a bow with pearl string and glue it on the lace trim. Also add a bling on the bow. Glue the flowers, fillers, leaves and swirls as shown. Stamp a sentiment from the banners of love stamp in black ink on white cardstock. Color it with zig markers and cut it with coordinating die. Adhere it on the shadow box using dimensional tape.

For the finished look apply sparkling dust on the flowers using adhesive that dries clear.

Other Products: Card stock: cream; Gold mirrored card; 90# water color paper; Ranger Distress Ink, Vintage Photo; Spellbinders Lattice die and Classic Ovals Large die; Prismacolor watercolor pencils: Sunburst Yellow, Carmine red, Grass Green; craft foam; lace; ribbon; gold thread; pop dots; Wink of Stella-clear, VersaMark watermark ink, Snow embossing powder.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Card is 4 5/8 x 6". For card base, cut cream cardstock 6" x 9 1/4", fold in half. Cut floral designer paper 4 3/8" x 5 3/4"and adhere to card. Cut pink design paper 4" x 5 1/4", add to card. Cut 5 1/4" circle, cut in half and add to card. Fussy cut sentiment ticket and adhere on the left side. Stamp the wheat in VersaMark watermark ink, emboss with Recollections Snow embossing powder and color with Prismacolor watercolor pencils on watercolor cardstock and die cut. Add to the upper right corner.

Die cut 2 oval dies together to create frame. Die cut lattice from gold mirror cardstock and add behind frame. Trim to fit as needed. Add the center oval, from the oval frame, back onto card with a pop dot. Stamp flower, bird and butterfly images on water color paper with Vintage Photo ink, color with watercolor pencils and die cut with coordinating dies. Trim the birds from the Umbrella and discard the umbrella. Die cut the flower from craft foam. Add foam behind the stem and leaves. Shape flowers with the flower shaping essentials and add pop dots to the centers.

Add Lace and ribbon toward the bottom. Layer everything on card as shown with a nest of gold thread under the bird. Add Wink of Stella

Other Products: Black card stock, Zig real brush pens, Distress inks-SeedLess preserve, score board, Black ink versafine onyx black

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Make the card base by cutting white card stock 8" x 8" and another piece 8" x 8 1/2 ". Score the second piece of card stock at 1/2 " mark and fold. Adhere the first piece of card stock to the folded paper and make a card base 8" x 8". Cut a black card stock 7 3/4 " x 7 3/4" and adhere to the card base with clear glue. Cut a pattern paper from paper collection 7 1/2 " x 7 1/2 " and adhere to the black mat layer.

Cut an intricate lace frame die cut from white card stock and adhere to the top right of card panel with foam dots. Cut a A2 card panel from the paper collection and adhere to the frame. Cut two ovals and distress the edges with Seedless preserve distress inks. Stamp the quote from the Quote cling stamp with onyx black ink on the smaller oval. Layer the two ovals together with foam circles and apply ultra fine glitter powder on the edges using clear glue.

Stamp the coneflowers with black ink on white card stock. Colour with Zig real brush pens in shades of dark pink and purple. Cut with coordinating dies. Apply clear glue on the flowers and add glitter powder. Adhere one coneflower swirl on the top of the frame with foam dots. Adhere the other two floral images on the left corner.

Stamp the daisy images with black ink. Colour with seedless preserve distress inks. Shape the flowers on the molding pad from the flower shaping tool kit and add some texture on the flowers using groove tools. Make a hole in the flower centers. Make a bunch of pollens and add to the flower centre. Layer two flowers together. Arrange the flowers and leaves on the stamped coneflower images on the left. Add smaller filler flowers to finish the card.

Other Products: Bone folder, heat gun, antistatic pad, vellum for stamping and die cutting, white card for stamping and die cutting, White Linen Card, Versacolor white Pigment Ink, White Embossing Powder, Distress Oxide Ink Wilted Violet, Archival Black Ink, Gelatos - Green Tree, Mango, Butter Cream, Brilliance Pearlescent Chocolate, Nuvo Aqua Flow Glitter Gloss pen, Diamond Stickles.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Card size is 5 x 6 5/8". Using the Garden's Edge Coneflower stamp set, stamp the row of Coneflowers on white cardstock using your White Versacolor Ink, then cover completely in white embossing powder, shake of the excess and heat with your heat gun. I use an antistatic pad to wipe my vellum and cardstock before stamping, it creates a static free environment. I have colored these images using Gelatos. Gelatos are a water-soluble crayon which is great for blending and shading over heat embossed images. Firstly, just scribble the desired colors over the image, green for the stems, Butter Cream for the flower petals and Mango for the flower centers and now you are just going to rub it in with your fingers until blended and smooth, for the highlight add Mango to the bottom of the flower petal and now rub in with your fingers to blend. When you are happy with your shading use a cloth to rub off the excess color and it will leave the white embossed stamp more visible. If you use a damp cloth your color will be less vibrant, just experiment with your coloring technique. Highlight the flowers centers using the Pearlescent Chocolate ink very lightly.

Using the Butterfly Dreams Border Stamp set stamp on vellum using your White Versacolor Ink, then cover completely in white embossing powder, shake of the excess and heat with your heat gun. Using your Blossoming Coneflower and Backyard Blossoms Stamp sets, stamp your flowers using Archival Black Ink, I have only stamped the top of the flowers as we will only be using this section. Color the flowers using your Wilted Violet ink using your Stack and Store daubers. Trim of the flower centers you will only be using the petals. Spray the petals with your mini mister and shape using your Deluxe Flower Shaping Tool Kit.

Cut your card base using the white cardstock 10" x 6 5/8". Fold your card in half, I like to run a bone folder over the spine of the card to give it a clean finish. Using the selected Patterned cardstock from the Backyard Blossoms Paper Pad, cut your front mat 6 1/2" x 4 7/8", die cut the Fleur Border Basics Die down the right-hand side. Using the coordinating decorative border die select the purple contrasting cardstock from the paper pad and die cut 1 matching border. Using the Fleur Border Basics die, die cut the right hand front side to match your patterned cardstock. I have adhered the decorative border to the back of the front mat and then adhered it to the card front (this conceals the border between the layers for a neater effect on the inside of your card). Trim the selected cardstock from the Backyard Blossoms Paper Collection 6 1/2" x 4 7/8" for the inside mat. Adhere the insert mat.

I have trimmed the Butterfly border into single butterflies, trim them as pictured or play around with where the flourish sections sit. Adhere the butterflies with adhesive only down the center of the butterflies so the wings can be folded up. Adhere your petals over the flowers. Trim down the row of Coneflowers into single flowers and adhere as desired or as pictured. Highlight the purple flowers using the Nuvo Aqua Flow Glitter pen. Highlight the flower centers and the Butterflies using the stickles.

Other Products: White cardstock, Archival ink- Saffron, Pencil colors, Clear dry glue, Foam tape, Double sided tape

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: The finished card measures 6 x 9-1/2 inches. For the card base cut white cardstock 12 x 9-1/2 inches, score at 6 inches and fold. Cut patterned paper 1/2 inch shorter than white card base, distress the edges and layer on top with clear dry glue.

Cut white cardstock twice using largest and smallest Eyelet Hearts Die. Mat with Die cut pattern paper from the collection using the second and third largest die. Overlap the Heart cutouts and arrange on the right side of the card with 3D foam tape.

Stamp white cardstock with flower image from Backyard Blossoms stamp and Blossoming Coneflower set with Archival ink Plum, and cut using the coordinating die. Stamp flower image from Garden's Edge Coneflower stamp set with Archival ink Saffron ink on white cardstock and die cut using coordinating die. Color all the images with pencil colors.

Arrange the colored images as shown and apply Crystal Clear Glitter on top of flower images. Cut the sentiment quote from the collection, mat it against white cardstock and layer on upper right side of card with 3D foam tape.

Other Products: Kuretake pens: - Dark Gray and Light Violet, Versamark, Gold embossing powder, Pear Pizzazz, Old Olive, Soft Suede card stocks (Stampin Up!), Foam pads, Double sided tape, Wet glue.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Score a piece of 11 1/2" x 7 3/4 " Pear Pizzazz card stock in half to give a 7 3/4" x 5 3/4" card base. Cut a 5 1/4 " x 7 1/4 " piece of Old Olive cardstock and adhere onto the card base. Select your paper from the pad, cut a 5 x 7" piece and edge with Soft Suede ink, adhere to the base card.

Die cut the eyelet Oval in Soft Suede cardstock and a simple oval in coordinating paper. Edge the paper with soft suede ink, layer the ovals and add to the card base using wet glue.

Stamp the sentiment in VersaMark onto a 1 1/2" x 7" strip of Pear Pizzazz card tock. Cover with gold embossing powder, remove excess and heat. Use a slightly larger strip of patterned paper to mount the sentiment on and then a 1 3/4" x 7" strip of Soft Suede cardstock. Add to the center of the card using foam pads.

Stamp the coneflowers in VersaMark onto Pear Pizzazz cardstock, cover in gold embossing powder, remove excess and heat. Color the flowers using Kuretake watercolour pens and die cut. Shape the flowers and position onto the card using hot glue.

Other Products: Zig markers, water pen, black embossing powder, 8x10 frame with mat, black ink

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Stamp 4 of the corner coneflowers and the large flower from the Blossoming Coneflower stamps in black ink, sprinkle black embossing powder and heat emboss. Water color with markers and water pen or brush (Zig markers used here), die cut with corresponding dies. Stamp multiple flowers from the Backyard Blossoms and Garden's Edge Coneflower stamp sets in black ink, sprinkle with black Embossing Powder and heat emboss. Water color with markers. Stamp Butterfly in black ink, sprinkle with black embossing powder, and heat emboss. Color with water Zig markers.

Cut out scenery paper from the Backyard Blossom Paper Collection slightly larger than 5x7" and tape to the back of the mat from the frame. Stamp the verse from the Words of Comfort Cling Stamp Set on light colored paper from the Backyard Blossom Paper Collection and die cut with oval. Die cut assorted oval mats from the Eyelet Oval & Basics Large & Small Die sets, the largest oval in purple designer paper from the Paper Collection and using the smaller Eyelet Oval for the final mat layer, adhere to middle top of scenery.

Arrange and adhere wildflowers, layering from the left, with the two large coneflowers on top, as shown. Add Crystal Clear Glitter to two large flowers.

Stamp butterfly from the Butterfly Kisses Cling Stamp set using black ink, add embossing powder and heat emboss. Die cut with corresponding die, add Crystal Clear Glitter and glue to top right of verse.

Other Products: Yellow Satin Ribbon, Faber-Castell Glass Bead Glitter Gel, Double Sided Adhesive Tape, Paper Trimmer, Scissors, Bone Folder, 3D Mounting Foam Tape, Faber-Castell Polychromos Pencils: Purple Violet 136, Manganese Violet 160, Violet 138, Light Magenta 119, Fuchsia 123, Terracotta 186, Orange Glaze 113, Cadmium Orange 111, Dark Chrome Yellow 109, Cadmium Yellow 105, May Green 170, Earth Green Yellowish 168, Permanent Green Olive 167

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.

Instructions: Fold the flaps on the 17"x 5.5" card base from the White Foldout Card packet.

Using the simple curved dies from the Fleur Border Basics Craft Dies set, die cut and cover each panel using desired designer paper. Use the video on Foldout Cards to learn how to use and line up the Fleur Border Basics Craft Dies set here: https://youtu.be/wxX94X84kUo. Diecut borders from the Fleur Border Basics dies from designer paper, to border each panel. Also diecut two doilies from the Butterfly Kisses Die set, using a scissors cut these in half.

From the Butterfly Kisses Cling Stamp set, stamp one butterfly in black ink onto white cardstock and die cut with the coordinating die. From the Backyard Blossoms Cling Stamp set, stamp and die cut the following with their coordinating dies in black ink on white cardstock: two coneflowers, two small coneflower fields, two sprays and one wheat field. Color with the Faber-Castell pencils. Use the Deluxe Flower Shaping Kit to shape the petals. Using Designer Dries clear, adhere Go Man Go Prills to the centers of the two coneflower centers and allow to dry.

From the Backyard Blossoms Collection paper pad, cut assorted sentiments and strips to use throughout card. Using the Luggage and Tags Die set, die cut a yellow tag with pink and yellow coneflowers and add ribbon. Adhere panels and borders onto card as shown, using a clear drying glue. Cut a panel from designer paper and layer on top of last panel. For the purple coneflower bouquet patterned background paper pocket piece, use adhesive on the left, bottom and right edges only to create a fold pocket and adhere to the yellow patterned side of the front of the back of the card, aligning the edges to the card edges. Allow to dry. This pocket is for the tag.

Adhere all pieces as shown, using foam tape where desired. Use Faber-Castell Glass Bead Glitter Gel or glitter of your choice and use it on all the stamped images for a shiny effect, concentrating on flower heads

Other Products: Crop-a-dile, natural twine, VersaMark ink or Hero Arts White ink, die cutting machine, vellum

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: The ready side fold card measures 6 1/2" by 7". For creating top panel you will need 3 layers. The topmost layer is from designer paper collection and measures, 6" by 6 1/2" All the edges are distressed with scissors and then layered on a white cardstock with a margin of 1/16" larger on all the sides. This is further layered on a dark green pattern paper 1/4" larger than the ready top panel

Follow, Emma's video to create a shadow box. Choose the designer paper from the collection for the inside of the shadow box. Tape down the shadow box and cover all the sides. Cut a frame from white cardstock, Eyelet Oval & Basics Small Die. Also cut a white die cut from Window Box Elements Die and adhere it on the top and bottom edge of the oval frame from the backside of the frame.

Stamp 2-3 images from Backyard Blossoms Cling Stamp Set and Garden's Edge Coneflower Cling Stamp Set on white cardstock with black ink and cut them using their coordinating dies. Once cut, paint them using Leaf Green, Fern Green Archival, and Rose Madder. With the help of sponge, apply adhesive that dries clear and sprinkle prills. Dust extras and leave it to dry.

Stamp images from Backyard Blossoms Cling Stamp Set with VersaMark or Hero Arts White ink on Papericious Vellum and sprinkle white heat embossing powder. Dust extra and heat set it with a heating tool. Paint the flowers with Distress Oxide Seedless Preserves. Let the color sit for few minutes, then wipe off the extra color with damp soft cloth. Shape the petals using needle tool or on the back of a thin pencil. Cut the petals in half and layer them together to create a half flower. Now glue these flowers on the already painted colored coneflowers and trim extra stamped image that is hanging out. Add a glossy accent to the cone center and add black color prills. Dust extras and set them aside for drying.

Stamp a corner from Blossoming Coneflower Cling Stamp Set with Versamark or Hero Arts White ink on Papericious Vellum and sprinkle white heat embossing powder. Dust extra and heat set it with a heating tool. Paint them using Fossilized Amber Distress ink. Let the color sit for few minutes then wipe off with a damp cloth. Shape the petals using needle tool or on the back of a thin pencil. Cut the petals in half and layer them together to create a half flower. Now glue these flowers on the already painted colored coneflowers and trim extra stamped image that is hanging out. Add glossy accent on the cone centers and add black color prills. Dust extras and set them aside for drying.

Stamp butterflies from Butterfly Dream Collection and Butterfly Medley Collection with VersaMark ink, sprinkle with white embossing powder, heat emboss the same way as flowers and then add little colors with Distress Oxides.

Cut 2 tags from the paper collection and mat them on the white cardstock. Make a hole with the help of crop-a-dile and add Papericious natural twine. Adhere these tags on the right side of the card under the shadow box. Once all the elements are ready, assemble the card as shown. Make the arrangement of all the prepared elements as shown and finish the card with a sentiment from the paper collection.

Other Products: Distress Inks: wild Honey; Rusty Hinge; Fossilized Amber; Seed Beads; Glue Gloss; creative embellishments chipboard; natural twine

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

Instructions: Card base is 6x6". Cut a 6x6" dark green from the paper collection, then a lighter green paper 5.75 x 5.75", ink the edges with leaf green archival ink. Assemble the box cutting a frame using the cut mat create die as well as a scenery piece for the inside. I also cut strips to go on the sides for the shadow box card.

Cut and Stamp on white card using coffee archival ink 3 sets of classic sunflower; the coneflower images and the Gardens edge wheat and sunflower edge. Also stamp the leaves form the delightful daisy as well as a classic rose vine. Cut out two tags using the luggage and tag die and mat these in dark green. Also cut out the Decorative Medallion Die. The top piece in white card and the bottom mat die in the same green as the card base. This will attach to the left side of the shadow box. Color the Creative Embellishments chipboard green with leaf green archival ink and adhere this to the back of he shadow box and on top of the 2 card panels.

Color all your leaves using the archival inks and the distress inks on the flowers. Create the cone flower by cutting a sunflower in half; and placing dries clear on the cut edge then gluing it down on the stamped image. Add some seed beads to the centers of the sunflowers as well as the small sunflower spray for the inside of the card. I created two large coneflowers and left most of the sunflowers single layers.

Place the smaller sunflower edge inside the base of the shadow card. I placed most of my flowers on the left hand side of the card, but you can place all of these where you wish. I did place the largest sunflower on the top right corner and placed the leaves from the delightful daisy underneath.

Look for a sentiment from the collection. I used 'Have a beautiful Day' and popped this on the front near the bottom of the shadow box and I banner cut one end so it would look like a flag. Detail all the flowers and leaves using glue gloss and Crystal Clear powder.

Other Products: White cardstock, Ticket Punch, Cuttlebug Embossing Folder, small foam dots, Die Cut Machine

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Prepare a White card base 5 x 7", cut another piece of white cardstock using the Eyelet Rectangle die, run it through the die cut machine to emboss it with the Cuttlebug folder, apply foam dots on the back and adhere to card base.

Stamp the Coneflowers on white with the black ink, color in with the Tiger Lily, Coffee, and Emerald Green, cut out with the matching die, add foam dots to the back and adhere to card as shown. On the smaller flower stamp again and color as the first one, diecut and cut the flower part off the stem, add foam dots and adhere to the top of the flower.

Locate the sentiment tag, cut out, use the ticket punch and punch the corners. Add foam dots and adhere to card.

To finish, using dries clear adhesive, add Rajni Chawla's Crystal Clear glitter to all the flowers.

Other Products: Abandoned Coral, Candied Apple, Walnut Stain and Peeled Paint Distress Oxide Inks, Versamark ink, Gold cardstock and pearls.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Stamp the sentiment from Today's Quotes Stamp Set on a piece of white cardstock using VersaMark ink twice and heat emboss it using Gold Embossing Powder and Heat It Craft Tool. Die cut this piece using the die from Intricate Swirl Frames Die so that the sentiment is in the middle. Adhere it on a piece of same sized white cardstock as shown. Glue it to a slightly larger piece of gold cardstock. Glue down this panel on a 4" x 6" white cardbase using Darice Adhesive Foam Strips.

Stamp the image from Garden's Edge Coneflower Cling Stamp Set on a piece of white cardstock using Versamark ink twice & heat emboss it using Gold Embossing Powder and Heat It Craft Tool. Color it using Abandoned Coral, Candied Apple, Walnut Stain and Peeled Paint Distress Oxide Inks and Fantastix Blending Tool. Die cut them using the matching die from Garden's Edge Coneflower Die. Adhere it to the card front as shown using Darice Adhesive Foam Strips. Add some pearls to add finishing touches.

Other Products: White Cardstock, Chameleon Colored Pencils (302 Kumquat, 502 Coffee), Distress Oxide Ink (Fossilized Amber, Spiced Marmalade, Antique Linen), Stampin Up Ink (Old Olive, Lemon Lime Twist), Close To My Heart Ink (Chocolate, Sorbet, Pixie), Distress Crackle Glaze (Rock Candy), Edge Distresser, Craft Knife, Glitter, Buttons, Burlap String, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, E-Z Runner Grand, Adhesive Dots- Medium, Dual Tip Glue Pen)

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: The light green bordered paper is the background. Use a craft knife to cut along the border pattern at the top and bottom. Find and cut the bottom border from both of the pieces of purple background patterned paper. Layer one on top of the other to match the patterns. Adhere together. Cut 2 pieces of dark green patterned paper that are the same width as the combined borders. You want the combination of the 3 to be a full 12". Tuck the ends under the edges you cut earlier and adhere in place. Cut a piece of yellow patterned paper that is 4.5x5.5" and adhere to the middle of the layout. Crop the photo to 3.5x4.5 "and mat twice in white cardstock. I distressed the edges of these layers. Adhere to the layout using crafty foam tape. Find and cut out the "Always and Forever" sentiment and adhere to the left of the matted photo.

Stamp and die cut 2 of the Corner Coneflower image using brown ink (Chocolate). Add color to the full image of one and the flowers only of the other. Use ink and daubers to add color. Fossilized Amber, Sorbet and Spiced Marmalade on the flower portion of the images and Old Olive and Lemon Lime Twist to the leaves. I came back and used Chameleon Colored Pencils to do a little shading (Kumquat and Coffee). Stamp and die cut 4 of the small Coneflower Blossom images using brown ink. Add color to the images to the same as the pervious image.

Stamp and die cut 2 of the wheat images in brown ink and add color using a dauber and Antique Linen ink. Stamp and die cut 1 of the mini backyard blossom images using brown ink. Add color using in and daubers (Pixie, Lemon Lime Twist). Using a glue pen add glitter just to the blooms of this image. Let dry.

Die cut 1 of the large Intricate Swirl Frame die, and I actually used the middle bit that is left over. Cut it in half and adhere to either side of the matted photo using crafty foam tape. From the flower only colored images, cut off just the petal sections. Shape all of the flowers and leaves. Using the clear crackle medium and a paintbrush, add glaze to the petals of the flowers. Let dry. Using small foam squares adhere the petals to the full flowers.

Adhere the single flower images to either side of the matted photo. Then I cut pieces off of the corner image and adhered them next to the single blooms. Cut apart the backyard blooms into smaller pieces and add to either side of the matted photo. Cut apart the wheat images and add around the tops of the single blooms. Add buttons with burlap string bows to the top and bottom of the layout.

Other Products: Thick White Cardstock. Glass mini beads. Ribbon.

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

Instructions: Click here to view a larger photo of this project. Card stock size for house shape card width is 12" and score at 2", 4", 2", 4", height is 6 5/8", 2". For top house cover roof size width is 7 7/8" and score at center, height 3 1/8". See template here. Cover the base with Backyard Blossoms Pattern paper as seen on the picture. For the front cover cut two medallion die and paste it at the centre and on top of that adhere one circle die with foam tape to give some dimension.

Next stamp some Backyard Blossoms and Garden Edge Coneflower with archival ink plum, leaf green, orange blossoms and die cut them with matching die color them too with archival ink and then shape them with deluxe flower shaping tool kit and then sprinkle some glass mini beads. Now arrange these embellishments as shown.

Now stamp Blossoming Coneflower and Garden Edge Coneflower and Backyard Blossoms with plum archival ink and cut them with matching die. For one set of Blossoming Coneflower, color them with archival ink-Leaf green and for second stamp and die cut color it with archival ink- Sunflower and Cactus Flower and shape them with Deluxe flower tool kit and sprinkle crystal clear glitter and at the centre of the coneflower sprinkle some prills and Redland elements, and layer it on the first set. Next for the Garden Edge Coneflower and Backyard Blossoms stamp with archival ink plum and die cut them with matching die color them with archival ink leaf green, sunflower and cactus flower and shape them too and then at the centre of the flower sprinkle prills and Redland elements and sprinkle crystal clear glitter on the flower petals. Now adhere these flowers on the right side of the card as shown.

Now for the Top of the house roof, cover it with pattern paper. For the edge cut two border die from Sweetheart border set and paste it on the edge as shown. Then add some crystal clear glitter on it. Next paste a border of pattern paper from the collection and adhere it as shown. Now stamp Backyard Blossoms with archival ink plum and die cut it with matching die and color them with leaf green, sunflower, carnation red and cactus flower and at the centre of the coneflower add yellow prills.

For the spine of the card, stamp one Blossoming Coneflower border with archival ink plum and cut it with matching die and color them randomly with archival ink cactus flower and then add crystal clear glitter and adhere it with foam tape. Now add one flower from Backyard Blossom and some leafs, bushes.

Now add sentiment taken from the pattern paper and distress the edges and adhere it too with foam tape as shown.

Now close the card with ribbon.

Other Products: Champagne Metallic Cardstock, Bronze Brown Metallic Cardstock, VersaMark, Scor Tape, Misti, Dimensional Dots, Dimensional Tape

For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.

For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.

Instructions: Card size is 6 3/4" x 4 3/4". Cut two of the largest Intricate Swirl Frames dies from 5" x 7" Bronze Brown Metallic Cardstock. Cut the first one as is. Before cutting the second one, add two pieces of Scor-tape at the top. After cutting, score the second one at the second stitch line. Remove the tape backing and adhere the two pieces together to form the card base.

Cut the smallest eyelet die from the Eyelet Rectangle and Basics Die out of Champagne Metallic Cardstock. Stamp the sentiment on Bronze Brown Metallic Cardstock using VersaMark Ink. Sprinkle with Aged Ivory Embossing powder, heat set using the Heat It Tool and diecut using the second smallest rectangle die from the set. Adhere the two panels together using dries clear adhesive and adhere to the card base using dimensional tape.

Stamp both images from the Blossoming Coneflower Cling Stamp Set on Champagne Metallic Cardstock using VersaMark ink. Sprinkle with Aged Ivory Embossing Powder and heat set using the Heat It Tool. Color using the Stack and Store Daubers and Archival Leaf Green, Sunflower and Coffee inks. Diecut using the coordinating dies, lightly shape using the Deluxe Flower Shaping Kit and adhere to the card base using dimensional dots as shown.

Sponge the coneflowers and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Other Products: Hot glue gun, hot glue, water mister, scissors, paper trimmer, die cutting machine

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Cut a piece of white cardstock to 10 x 7" size, score and fold at 5" to create card base. Cut the paper shown, from the Purr-fect Posies paper collection to 6 7/8" x 4 7/8" size panel. Use the largest circle from HCD1-7155 Circle Basics Large Die to diecut an opening in panel as pictured and save cutout circle piece. Use the largest eyelet circle from HCD1-7154 Eyelet Circle & Basics Small Die to diecut a circle from white cardstock. Next use the afore mentioned large circle die to diecut the center of white eyelet circle, creating a very petite eyelet frame. Attach this frame around the circle opening of paper panel and discard remnant white circle. Very lightly sponge the edges of the panel with Majestic Violet ink and lay aside.

Stamp the swinging kitties from HCPC-3875 Purr-fect Playdate Cling Stamp Set in Archival Coffee ink onto white cardstock and diecut with coordinating die. Stamp the 2nd largest posies from HCPC-3874 Purr-fect Posies Cling Stamp Set in Forget-Me-Not ink onto Deluxe Flower Shaping Paper and diecut with coordinating die. Stamp 2nd smallest posies in Vibrant Fuchsia ink, smallest posies in Majestic Violet, and leaves in Leaf Green from same stamp set onto white cardstock and diecut with coordinating dies. Stamp the vining posies from HCPC-3876 Purring and Playful Cling Stamp Set in Leaf Green onto white cardstock and diecut with coordinating die. Stamp the petite leaves from HCPC-3801 Simply Classic Cling Stamp Set in Leaf Green onto white cardstock and diecut with coordinating die.

Use the Zig markers along with blender to color in the detailed areas on the swinging kitties. The following markers were used, Mid Gray, Light Violet, Light Carmine, Olive Green and Light Green. Sponge the 2 of the 2nd largest posies with Forget-Me-Not in the center and lightly with Vivid Chartreuse on the edges. Sponge 2 of the 2nd smallest posies with Vibrant Fuchsia in the centers. Sponge the 3 smallest posies lightly with Cactus Flower ink in the centers. For the vining posies, sponge with Vibrant Fuchsia and Cactus Flower ink. Use Leaf Green and Vivid Chartreuse on the leaves.

Place the posies and posy leaves into the Purr-fect Posies Shaping Mold. Lightly mist with water before sending through the diecutting machine. Layer the two 2nd largest posies together. Pierce the center of all the posies and thread stamens through and attach with hot glue.

Temporarily place your kitty paper panel onto your card base. Attach the kitty paper circle through the opening directly onto the card base. Use double dots to attach the swinging kitties onto the circle. Cut a piece of clear cardstock to 4 1/4 x 4 1/4 " size and attach to the backside of circle opening on kitty paper panel. Now use a double layer of double dots to attach the kitty paper panel onto card base. Cut a sentiment from the paper collection and very lightly sponge the edges with Majestic Violet ink and attach onto card as pictured. Arrange and attach the posies and leaves onto the card as shown. Use the Dries Clear glue along with Crystal glitter to add a sparkle over the posies, leaves and rest of card as desired.

Other Products: Hot Glue, Die Cutting Machine, Water Mister, Texture Paste, Plastic Spoon, Paper Distresser, Foam Squares, Scissors, white cardstock

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Card size is 7 3/4 x 5 1/2". Cut white cardstock to 7 3/4 x 11". Score and fold at 5 1/2". Cut pink paper from paper collection to 7 1/2 x 5 1/4" and adhere onto card base. Choose purple paper from paper collection and cut into 7 3/4 x 1". Use paper distresser along edges to give a rough unfinished look. Adhere using adhesive squares (you may have to trim the two outer strips so they're less than 1"). Use decorative paper from paper pad and cut to 7 3/8 x 5 1/8". Die cut the top and bottom with the plain Fleur Border dies. Die cut 4 hexagons onto this panel. Cut white cardstock to 7 3/8 x 5 1/4", die cut the decorative Fleur Border on both ends. Adhere hexagon panel on white coordinating cardstock using foam dots, avoid putting any dots too close to the edge of the hexagons, since we'll still slide a few things underneath.

In the large hexagon insert stamp sentiment in Majestic Violet ink and adhere inside bottom hexagon. Pair two hexagon dies together, to die cut white cardstock, creating a frame. I layered 4 frames together, gluing each layer using Dries Clear glue. This creates a thicker frame. Sponge same glue onto top of hexagon frame and sprinkle with Rajni Chawla's Crystal Clear. Allow to dry. Die cut Intricate Swirls on white cardstock x2. Use scissors to cut in various sizes and adhere on one large and one small hexagon from white cardstocks (leftover from die cutting your frames) and small hexagon from paper collection. Adhere the hexagon backgrounds directly on the white background using dries clear glue.

Stamp Kitten border and feline lady using Jet Black ink onto white cardstock. Stamp leaves from Simply Classic stamp set in Leaf Green ink. Die cut with coordinating dies. Color border kittens using daubers along with Sepia and Jet Black inks. I also blended Sunflower ink on the walking kitty, to give it a more orange shade. Color the feline lady's hat with Sunflower and Sepia, the leaves with Vivid Chartreuse and the flowers with Cactus Flower. I also used a Dove Blender to add a soft shade of pink using Cactus Flower to the ears and nose of all the kittens. Use the Dove Blender, the solution and Jet Black ink to create a soft shade of gray, and add shadowing to the white feline lady. Shape with Deluxe Flower Shaping Kit. Finally use the Texture Paste and a plastic spoon to apply paste to feline lady. Use the spoon to give short taps creating fluffy fur on feline lady. Color leaves with Vivid Chartreuse and Leaf Green ink and shape with Deluxe Flower shaping kit.

Stamp lots of Purr-fect Posies using Cactus Flower ink, and the leaves with Leaf Green ink onto Deluxe Flower Shaping Paper. Die cut using coordinating dies. Color 4 of the extra small posies on the front and back using Sunflower ink with a touch of Cactus Flower in the center. Color the small posies with Sunflower and Cactus Flower. Color the medium posies with Sunflower in the center and Cactus Flower on the petals. Color the large ones with Cactus Flower in the center and Majestic Violet on the petals. Color the leaves with Vivid Chartreuse and Leaf Green ink. Shape using the coordinating mold, along with a water mister.

Choose stamens from the bridal stamen collection and ink the stamens with daubers Most of them I colored with Sunflower ink, but 4 I did Cactus Flower ink. Use the stylus to shape the 4 extra small posies in a bud shape, pierce the center and insert the Cactus Flower stamen. Glue to secure. Layer flowers as desired, pierce the center and insert Sunflower colored stamens. Adhere kittens in hexagons as shown, adhere feline lady using foam dot. Arrange flowers, leaves, and fillers as shown. Adhere using hot glue, finally adding silver Rock Candy stamens in arrangement as desired. Add Crystal glitter on card and tap off.

Other Products: White card stock, Big Shot Die Cutting Machine, paper trimmer, scissors, water, mist bottle, foam tape, low tack tape, smooth water color paper

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Create a 6" x 6" card base from white card stock. Trim down the plaid square premade card panel in the Purr-fect Posies Paper Collection to be just slightly smaller than the card base. Using Stack and Store Dauber, ink all edges using Ranger Archival Ink - Deep Purple. Adhere to card base.

Locate patterned premade card panel shown in card sample and trim down to be slightly smaller than first mat. Using the largest oval die from the Eyelet Oval & Basics Large die that does not have the eyelet edging, die cut an oval into the side of the second mat. Ink all edges using Stack and Store Dauber and Ranger Archival Ink - Deep Purple. Trim sentiment strip and main sentiment from Purr-fect Posies Paper Collection. Trim sentiment strip to fit down side of card opposite of oval window. Using scissors, snip out ribbon banner ends on main sentiment. Ink all edges as done on previous pieces. Adhere sentiment strip to side of mat as shown.

Choose a piece of decorative paper from the Purr-fect Posies Paper Collection that has some blossoms and foliage. Trim down and adhere to back mat where oval window will be placed once adhered to card front.

Die cut a fancy decorative pocket embellishment from the Elegant Pocket Accents Die from white card stock. Die cut a background for the embellishment piece for the pocket embellishment from purple patterned paper in Purr-fect Posies Paper Collection. Adhere the two die cuts together using Designer Dries Clear Adhesive.

Die cut an oval frame from white card stock using the large oval die used previously and the large eyelet oval die.

Stamp two inkings of each size posies from the Purr-fect Posies Cling Stamp Set onto Deluxe Flower Shaping Paper using Ranger Archival Ink - Magenta Hue and Deep Purple. Color the posy centers with Stack and Store Daubers using Ranger Archival Ink - Buttercup, the purple flower petals with Ranger Archival Ink - Majestic Violet, and the pinkish flower petals with Ranger Archival Ink - Pink Peony. Stamp two inkings of the posy foliage from the Purr-fect Posies Cling Stamp Set onto Deluxe Flower Shaping Paper using Ranger Archival Ink - Olive. Color using Stack and Store Daubers and Ranger Archival Ink - Leaf Green. Die cut all posies and foliage pieces using coordinating dies. Place in 3D Purr-fect Posies Shaping Mold, spritz lightly with water and pass through die cutting machine to shape. Set aside to dry. Create one double blossom in purple, and one double blossom in pink. Leave remaining flowers as single posies.

Stamp the kittens on swing image from the Purr-fect Playdate Cling Stamp Set onto smooth white water color paper using Ranger Archival Ink - Jet Black. Water color using Zig Clean Color Real Brush Markers and water brush. Die cut using coordinating die. Apply dimensional pop dots to back of die cut image.

Using dimensional foam tape or pop dots, adhere second mat with oval window to card base. Adhere decorative pocket die cut to side of oval as shown. Layer oval frame over top of opening. Remove pop dot backings and tuck kitten image into oval window opening. Adhere main sentiment to card base using dimensional foam tape or pop dots.

Arrange floral clusters, with one double blossom on bottom of side of oval and second double posy along top side as shown in card sample. Assemble single blossoms and foliage as shown.

Apply Baby's Breath Ultrafine Transparent Glitter to all posy petals and preprinted images on decorative papers using a fine metal tip and Designer Dries Clear Adhesive. Adhere Heart of Gold Prills to posy centers.

Other Products: White cardstock, Big-Shot Machine

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Card size is 6" x 14" and score at 4", 8" and 10". It's a step-up card. Cut paper from the collection , tear the edges and adhere to the card base.  

Cut one die from Adorn It Pocket Accents Die from white cardstock and adhere it on the front as shown. Cut another die from Petite Pocket Accents Die on white cardstock, adhere it on the top fold and sprinkle crystal clear glitter using Designer Dries Clear Adhesive.

Cut another two dies from Regal Pocket Accents Die on white cardstock and adhere on the second fold as shown using Designer Dries Clear Adhesive.

Cut three different dies from Eyelet Diamond Die and distress the second layer of eyelet diamond die with archival ink- Vibrant Fuchsia. On the top layer add sentiment from Special Birthday Sentiments Cling Stamp Set using archival ink-Jet Black.

Cut one smallest frame die Regal Frame &Accents Die on white cardstock and cut it into half and sprinkle crystal clear glitter and adhere it on the top layer of eyelet frame die.

Stamp one image from Playful Miss Kitty Cling Stamp Set on white cardstock using archival ink-jet black and cut it with coordinating die and color it with Zig Clean Color Real Brush Markers using Color In Watercolor Brush-Fine and sprinkle crystal clear glitter. Adhere it with foam tape.

Stamp one spray image from Purring and Playful Cling Stamp Set using archival ink-library green, cut it with coordinating die, sprinkle crystal clear glitter and adhere it as ahown.

Stamp some flowers and leaves from Purr-fect Posies using archival ink- Vibrant Fuchsia and Library Green for leaves, cut them with coordinating die and color them with archival ink Vibrant Fuchsia and Leaf Green. Shape them using 3D Purr-fect Posies Shaping Mold, add stamen at the center and sprinkle crystal clear glitter using Designer Dries Clear Adhesive. Now arrange these flowers and leaves as shown.

Other Products: Smooth white cardstock, Ranger's White heat embossing powder, Heat gun, Die Cutting Machine, Score Board, Distress Oxides Peeled Paint and Wilted Violet, Funnel Tray, and Acetate Sheet.

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: The ready top-fold card from smooth white cardstock measures 8" by 5 1/2". To start with, create the first layer by choosing green color pattern paper from designer paper collection and cut to size measuring 7 1/2" by 5". Mat it on white cardstock, keeping all around a border of 1/16". Thread the pocket die and adhere it as shown and layer the panel on the ready card panel using foam dots.

For the top panel, choose the card panel from the paper collection and mat it on the white cardstock giving a border of 1/16". Secure a rectangular die from Cut Mat and Create Die 1B, cut a window and adhere an acetate sheet from behind. Choose another paper from the paper collection and stamp the sentiment using Archival ink, Cactus Flower. Secure the window from all sides with foam tape, add shaker elements and layer the card panel on a scenic paper. Cut a piece of purple paper measuring 6" by 4 1/2" from the same collection and layer it behind the shaker card panel keeping a white die cut from Intricate Swirl Frames Die between the layers. Layer the window panel on the ready card panel.

Stamp the images from Playful Miss Kitty Cling Stamp Set and Purr-fect Playdate Cling Stamp Set with black Archival on white cardstock. Color the images using Zig Markers and cut them using their coordinating dies. Also, stamp a fence from Tulip Cart & Fence Cling Stamp Set and distress it using Distress inks. Add extra die-cuts to the painted images to give them little extra strength.

For Vellum Posies, stamp multiple images of flowers from Purr-fect Posies Cling Stamp Set using Frost White Color Box ink on Vellum Sheet. Sprinkle white heat embossing powder and dust extras in funnel tray. Heat set all the images using a heat gun. Color the flowers using Wilted Violet Distress Oxide. Cut all the flowers coordinating dies. Also, white heat emboss the leafy veins from Classic Rose Collection and color them using Peeled Paint Distress Oxide. Shape the flowers and leaves using needle tool Press the centers and prepare different size flowers. Add prills to the centers using an adhesive that dries clear.

Once all the elements are ready, assemble the card as shown.

Other Products: White cardstock, London Fog Memento Ink, Purple Brilliance Ink, Lavender cardstock, Pearlescent white cardstock, Viva Decor Perlen-Pen Ice White, Cuttlebug Embossing Folder, Copic Markers: C1, C2, C3, B00, B01, B02, YG11, YG20, BV00, BV01, BV02, RV00, E50, E53, E42, E43, E44, yellow Dylusions spray ink.

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 6 x 6 5/8". Cut card base 12 x 6 5/8", fold in half to make 6 x 6 5/8" card. Cut a Pearlescent white 6 x 6 5/8" panel and glue to base. Cut white cardstock 5 3/4 x 6 3/8" then use the embossing folder (need to run through folder twice as it is not wide enough). Glue embossed panel to card. Cut 2 Petite Pocket Accents (wide die) out of Pearlescent then cut 2 narrow out of lavender. Cut Daydream Bridge Die out of white. Glue pocket accents dies and Daydream die to card, popping up Daydream die. Cut large eyelet heart out of lavender and 1 Eyelet heart a bit smaller out of the pearlescent cardstock. Pop up the lavender heart then glue the white Pearl heart to it. Add Dots of Pearl-Pen Ice White to each intersection in the embossed panel.

Stamp Posies using Lulu Lavender and sponge color on then die cut and form (see video above), give and extra squeeze to each petal at the ends to form a new type flower. Layer the flowers with 2 or 3 blossom layers and brush tips again with more Lulu Lavender ink. Fill smaller flower centers with Prills and add dyed stamen to the centers of the larger flowers (I sprayed the stamen with yellow ink and dried completely before handling).

Glue the colored branches and kitties to the hearts then add the flowers. Glue the flowers onto the branches and the swing ropes. Stamp sentiment with Purple Brilliance and die cut then tuck into branch/flowers on the left side. Glitter all the flowers and add a bit of glitter to card face.

Other Products: Card stock, white; Prismacolor Pencils; Ranger Distress Ink, Rusty Hinge; flat-backed pearls, ribbon, white; foam tape

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the Cherry Blossom Retreat collection, watch the tutorial at https://youtu.be/OaA2da5H-E0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Die cut large tag die from white card stock. Die cut Regal Frame and Accents Die with center piece from white card stock, add to tag. Stamp sentiment from Purring and Playful stamp set on white card stock with Jet Black. Die cut with Album Tags and Accents Die and use sponge dauber to ink edges with New Sprout. Add to bottom of tag.

Stamp kittens on swing from Purr-fect Playdate stamp on white card stock. Color with pencils and die cut with coordinating die. Add to tag with foam tape. Stamp birds on branch and birds from Tweet Cherry Blossoms Stamp set on white card stock with Jet Black. Color with Prismacolor pencils. Die cut with coordinating dies. Shape birds with 3D Cherry Blossom Shaping mold.

Add branch over swing and then add birds. Stamp Purr-fect Posies flowers on Deluxe Flower Shaping Paper with Magenta Hue and leaves with Bamboo Leaves. Use sponge daubers to ink with same ink. Die cut with coordinating dies and then shape with 3D Purr-fect Posies Shaping Mold. Add to tag and then add flat-backed pearls in centers. Stamp kitten from Purring and Playful stamp set on white card stock with Rusty Hinge. Die cut with coordinating die and add to tag. Add bow.

Other Products: White cardstock, Spectrum Noir marker FL3,

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

Instructions: Prepare a card base 5 x 7", lay a piece of the Purr-fect Posies paper on top that is 1/4 inch smaller. With white cardstock die cut one of the Lacy Diamonds out, cut in half and adhere on the card base. Die cut one of the Lacy Diamonds out and put foam dots on the back and adhere to card. Die cut one of the kittens out from the paper pack and add foam dots to the back, place in the center of the Lacy Diamond die cut.

On white cardstock stamp the leaves and flowers on the Deluxe Flower Shaping paper with the Sepia ink, color the leaves with the Vivid Chartreuse ink and the flowers with the Majestic Violet ink. Die cut using the coordinating dies. Ink the edges of the leaves with the Leaf Green and the flowers with the Majestic Violet. Place in the mold and shape. Arrange the leaves and flowers around the kitten.

To finish, add glitter to the leaves and flowers.

Other Products: Inks: Ranger Archival ink (Violet, Watering Can) Image Colored With: Distress Re-inker ink, Uni-ball signo white pen Paper: Bazzill Cardstock (green, white), 140lb. Canson cold press watercolor paper Accessories: embossing folder, foam dots, ribbon, Bow-it-All V3.0, MISTI

For more tips on creating with the Purr-fect Posies collection watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Finished size of tag is 4" x 6". Cut base of tag from green cardstock, cut a second tag shape from patterned paper, ink edges with violet ink, glue to green tag.

Cut window box shape from green cardstock, fold along score lines, score about 1/8" from edge of folded sides and fold, shade edges with Olive ink. Cut decorative pocket border from white cardstock, glue to top edge of window box, shape window box and glue together, glue to tag as pictured. Cut decorative label from green cardstock, cut smaller decorative label from white cardstock, emboss with embossing folder, glue both labels with foam dots, glue piece to tag with foam dots.

Stamp kitty image on watercolor paper with watering can ink, cut with coordinating die, color with Distress re-inker inks, shape slightly on the back of image with large stylus tip, glue to tag as pictured with foam dots.

Stamp posies and leaves on Deluxe Flower shaping paper, with the following colors, Olive, Sunflower and Violet inks. Cut with coordinating dies. Color flowers and leaves with same inks as stamped. Shape all pieces with coordinating 3D shaping mold. Add blue stamen to yellow flowers. Glue flowers and leaves as pictured. Add rock candy blue stamen. Add ribbon bow as pictured. Glue leaves and flowers on bow. Add glitter to flowers. Add mini prills to centers of flowers.

Other Products: White card stock. Black card stock, VersaMark, foam pads, wet glue silicone glue, hot glue, clear embossing powder, Gray Granite ink pad and watercolour pencils - Stampin' Up

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Score a 12" x 7" piece of white card at 6" to create a 6" x 7" card base. Cut slightly smaller piece of black card and adhere to the card base.

Cut a 5" x 6" piece of black card and stamp 3 of the stems onto the card using versamark, cover in white embossing powder, remove excess and heat to set.

Tear a piece of vellum approximately 4.5" in width and wrap around the card, use wet glue at the back to hold in place.

Stamp 3 or 4 more stems onto black card with VersaMark and white heat emboss as before. Die cut. Stamp the sentiment onto black card using the versamark and white heat emboss - die cut using the ovals.

Adhere the sentiment to the card base using foam pads and add a small amount of wet glue under the vellum to help hold it in place. Shape the stems using the flower shaping kit and adhere to the card base using silicone glue.

Stamp the kittens using gray granite ink onto white card, cover with clear embossing powder, remove excess and heat to set. Colour using the water colour pencils and allow to dry. Die cut and shape using the flower shaping tools and adhere to the card using hot glue.

Other Products: Scoring board, die cutting machine, flower pearls from Dress my craft, paper trimmer, Embossing folder, Distress ink -picked raspberry and peeled paint, white cardstock

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished card measures 7 inches by 5 inches. Cut white cardstock to 5 inches by 7 inches and cut another piece 7 1/2 inches by 5 inches. Score at 1/2-inch mark on the longer side. Fold and attach the first piece to this with the flap outside. Fold to make a top folding card.

Cut white card stock 6 3/4 inches and 4 3/4 inches. Place in the embossing folder and pass through the die cutting machine. Distress the embossed panel with Picked Raspberry Distress ink and adhere to the card front.

Cut two pieces of Intricate frame and distress one piece with a blend of pink and green Distress ink. Adhere the two pieces together with distressed piece on top. Attach the frame on the card front with foam dots.

Stamp the blossoms in violet and yellow Archival ink. Colour with same colours using sponge daubers. Cut with matching die and shape in the mold and with golf tools. Stamp the green leaves and shape in the shaping mold. Layer the flowers with glue and add flower pearls with clear glue.

Stamp the flower scroll with black ink and colour using Zig brush pens Cut with matching die. Stamp the kitten images in black ink and colour with Zig markers. Cut with matching die and add to the card using foam dots

Cut a doily and distress with green Distress ink on the edges. Stamp a birthday sentiment and attach to the bottom left card with foam dots.

Attach the kitten image on the card front with foam dots. Add the flower scrolls. Arrange all the flowers and leaves on the top left.

Other Products: Gathered Twigs, Mowed Lawn and Salty Ocean Distress inks, Candied Apple and Peeled Paint Distress Oxide inks, Hero Arts Unicorn Pigment Ink, WOW clear embossing powder, Tim Holtz Woodgrain Embossing Folder, Gansai Tambi Watercolors, watercolor cardstock, white cardstock and rhinestones.

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Die cut a piece of white cardstock using the die from Adorn It Pocket Accents Die and ink it with Gathered Twigs Distress ink. Use a pencil to mark the circular edge of the die cut on a 4 1/4" x 5 1/2" white cardstock and cut it. Adhere a piece of vellum on the back of this piece so that the total height of the panel is 5 1/2". Cut the die cut so that it's width is 4 1/4". Again, cut the die cut horizontally 1/2" from the bottom edge. Adhere the die cut as shown so that there is a gap of 2 1/4" between the top and bottom part of the die cut. Ink a piece of 4 1/4" x 5 1/2" cardstock using mowed lawn distress ink and adhere it behind the die cut and vellum panel.

Take an 8 1/2" x 2 1/4" piece of white cardstock and score it in the middle at 4 1/4". Emboss half of the cardstock till the scored edge using Tim Holtz Woodgrain Embossing Folder. Adhere the other piece down between the die cut piece on the card front.

Die cut 3 pieces of white cardstock using the dies from Eyelet Circle and Basics Small Dies, Butterfly Kisses Decorative Die and Album Tags and Accents Die. Ink the circle diecut lightly using mowed lawn distress ink and the tag diecut using gathered twigs distress ink. Ink the Butterfly Kisses Decorative Diecut using gathered twigs distress ink. Cut the tag diecut in the middle to reduce the width and adhere it behind the Butterfly Kisses Decorative Diecut and adhere the circle diecut on top as shown. Adhere the final piece on the embossed card portion as shown using Darice Adhesive Foam Strips.

Stamp the cat image and the flower stem image from Purring and Playful Cling Stamp Set on a piece of watercolor cardstock using Jet Black Archival Ink. Color them using Gansai Tambi Watercolors and die cut them using matching dies from Purring and Playful Die. Die cut 4 more pieces of white cardstock using the same cat die, stack and adhere all the die cuts together. Adhere the final piece on the card front as shown. Add tiny drops of Gloss White Nuvo Crystal Drops to the cat's bow. Add a tiny drop of 3-D Crystal Lacquer on the cat's nose. Stamp the sentiment from the same stamp set inside the card and adhere cut parts of the flower stem around it as shown.

Stamp the flower and leaf images from Purr-fect Posies Cling Stamp Set on a piece of Rajni Chawla's Vellum Flowerite using Hero Arts Unicorn Pigment Ink and heat emboss using WOW clear embossing powder and Heat It Craft Tool. Color them with Candied Apple and peeled Paint Distress Oxide inks using Stack and Store Daubers. Die cut them using matching dies from Purr-fect Posies Die. Shape all the leaves and flowers using Deluxe Flower Shaping Kit and Groove Golf Tool Set. Add a yellow stamen from Bright Bead Stamens to the flower centers. Adhere and arrange all the flowers and leaves as shown to finish off the card.

Other Products: Iris cardstock, Art Glitter Microfine glitter - Moon Dance, Nuvo Pure Sheen Glitter - Diamond, Foam Tape, Little Birdies Chipboard Lamp

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the layered card & shadowboxes, watch the tutorial at https://youtu.be/DrMIKI-XTmI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: For more photos of all the pages please visit my blog here. Follow the steps on Emma Lou's video to create the layered card and then decorate each page.

Front: Trim the base of the lamp and add it to the left side of the page. Stamp two leaf frond images from the HCPC-3876 Purring and Playful Stamp set in Library Green ink on Deluxe Flower Shaping card. Colour the leaves and stems with Leaf Green and Olive inks and the flowers with Wisteria and French Ultramarine inks and die cut with the coordinating die. Shape and add Crystal Clear glitter using Dries Clear Glue on a damp sponge. Adhere around the lamp as shown. Stamp the leaf images from the HCPC-3874 Purr-fect Posies Stamp set in Library Green ink on Deluxe Flower Shaping cardstock. Colour with Leaf Green and Olive inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge and add around the plant. Stamp the branch images from the HCPC-3867 Cherry Blossom Retreat Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Trim and add to the top right. Stamp the kitty image from the HCPC-3875 Purring and Playful Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the front of the page as shown. Stamp the pot plant image from HCPC-3872 Sweet Shoppe Treats Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Add Crystal Clear glitter using Dries Clear glue on a dry sponge and add to the right of the kitty. Add a little bird to the top of the flowers. Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Wisteria, Buttercup and Forget-Me-Knot inks on the Deluxe Flower Shaping card. Colour the purple flowers with French Ultramarine ink, the yellow flowers with Buttercup ink and the blue flowers with Forget-Me-Knot inks and die cut with the coordinating dies. Colour the back of the purple flowers with French Ultramarine ink, the yellow flowers with Buttercup ink and the blue flowers with Forget-Me Knot ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the blue flowers and Lettuce Entertain You Prills to the centres of the yellow flowers with Dries Clear glue. Add the purple flowers to the left over the plant and leaves on the left, the yellow flowers on the bottom right and the blue flowers over the branches on the top right. Stamp the bird images from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter to the birds using Dries Clear glue on a dry sponge. Add birds around the flowers as shown.

Page 2: Stamp the kitty image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the left of the page as shown. Stamp the little kitties from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the page as shown. Stamp the pawprint image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the page as shown. Stamp the leaf image from HCPC-3801 Simply Classic Stamp set in Fern Green ink on Flower Shaping cardstock. Colour with Leaf Green ink and die cut with the coordinating die. Shape and adhere around the playful kitty. Stamp the flower images from the HCPC-3769 Wildwood Florals Stamp set in Pearlescent Orchid ink on Flower Shaping paper. Colour the centres with Buttercup ink and die cut with the coordinating die. Sponge the edges with Pearlescent Orchid ink and shape using the Deluxe Flower Shaping kit. Add Crystal Clear glitter using Dries Clear glue on a damp sponge and Heart of Gold Prills to the centres. Adhere around Playful Miss Kitty.

Page 3: Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Wisteria ink on the Deluxe Flower Shaping card. Colour with French Ultramarine ink and die cut with the coordinating dies. Colour the back of the flowers with French Ultramarine ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the flowers with Dries Clear glue. Add the flowers to the left over the Stamp the leaf images from the HCPC-3811 Rainboots and Blossoms Stamp set in Fern Green ink on Flower Shaping cardstock. Colour with Leaf Green ink and die cut with the coordinating die. Shape and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Adhere on the right side of the page as shown. Stamp the little kitties from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the page as shown. Stamp the kitty image in a hat from the HCPC-3875 Purr-fect Playdates Stamp Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die and adhere to the left of the circle as shown. Stamp the flower images from HCPC-3769 Wildwood Florals Stamp set in Buttercup ink on Flower Shaping cardstock. Colour with Buttercup ink and die cut with the coordinating die. Sponge the edges with Tiger Lily ink and shape using the Deluxe Flower Shaping kit. Add Crystal Clear glitter to the flowers with Dries Clear glitter on a damp sponge and add Heart of Gold Prills to the centres. Add the flowers around the kitty on the right of the page as show. Stamp the bird images from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter to the birds using Dries Clear glue on a dry sponge. Add birds around the flowers as shown. Stamp the kitty and bird image from the HCPC-3875 Purring and Playful Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Add a little bird to the right side of the circle as shown.

Page 4: Stamp two leaf frond images from the HCPC-3876 Purring and Playful Stamp set in Library Green ink on Deluxe Flower Shaping card. Colour the leaves and stems with Leaf Green and Olive inks and the flowers with Buttercup ink and die cut with the coordinating die. Shape and add Crystal Clear glitter using Dries Clear Glue on a damp sponge. Adhere around the left side of the circle. Stamp the branch images from the HCPC-3867 Cherry Blossom Retreat Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Trim and adhere above the fronds on the left of the circle. Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Buttercup and Forget-Me-Knot inks on the Deluxe Flower Shaping card. Colour the yellow flowers with Buttercup ink and the blue flowers with Forget-Me-Knot inks and die cut with the coordinating dies. Colour the back of the yellow flowers with Buttercup ink and the blue flowers with Forget-Me Knot ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the blue flowers and Lettuce Entertain You Prills to the centres of the yellow flowers with Dries Clear glue. Add the flowers to the left over the plant and branch on the left as shown. Stamp the pawprint image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the page as shown. Stamp the kitty and bird image from the HCPC-3875 Purring and Playful Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere the birds to the top of the page as shown.

Page 5: Stamp the gate image from the HCPC-3861 Tulip Cart & Fence Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the centre of the page as shown. Stamp the kitty and bird image from the HCPC-3875 Purring and Playful Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere the kitty to the top of the right on the fence as shown. Adhere little birds to the top of the page as shown. Stamp the kitty image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the left on the fence as shown. Stamp the branch and bird images from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Adhere to the top right as shown above the bird bath. Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Wisteria ink on the Deluxe Flower Shaping card. Colour with French Ultramarine ink and die cut with the coordinating dies. Colour the back of the flowers with French Ultramarine ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the flowers with Dries Clear glue.

Page 6: Stamp the tulip images from the HCPC-3861 Tulip Cart & Fence Stamp set in Jet ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape and add Crystal Clear glitter with Dries Clear glue on a dry sponge and adhere to the bottom left of the page as shown. Stamp the pot plant image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape and adhere to the bottom right as shown. Stamp the little kittie from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere to the page as shown.

Page 7: Stamp the seat image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the left of the circle. Stamp the pot plant image from HCPC-3872 Sweet Shoppe Treats Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Add Crystal Clear glitter using Dries Clear glue on a dry sponge and add to the right of the kitty. Stamp the little kitties from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere the lying kitty on the chair and the other kitties around the pot plants and in front of the seat as shown. Stamp the kitty with balloons from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the right of the page as shown. Stamp the kitty and bird image from the HCPC-3875 Purring and Playful Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere little birds to the top of the page as shown Stamp the bird image from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter to the birds using Dries Clear glue on a dry sponge. Add the bird to the seat.

Page 8: Stamp two cart images from the HCPC-3861 Tulip Cart & Fence Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut the full cart from one image and the wheel from the other image. Adhere the wheel to the card. Stamp the tulip images from the HCPC-3860 Tulip Vase & Fillers Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Add to and around the cart and adhere to the left side of the circle. Stamp the watering can image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the page as shown. Stamp the little kitties from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere the sitting kitty to the right of the page as shown. Stamp the branch images from the HCPC-3867 Cherry Blossom Retreat Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies.Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge.Trim and adhere on the top left above the cart. Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Wisteria ink on the Deluxe Flower Shaping card. Colour with French Ultramarine ink and die cut with the coordinating dies. Colour the back of the flowers with French Ultramarine ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the flowers with Dries Clear glue. Adhere over the branch as shown. Stamp the bird images from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter to the birds using Dries Clear glue on a dry sponge and add birds around the flowers as shown.

Page 9: Stamp the little kitties from the HCPC-3876 Purring and Playful Stamp on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Adhere the playing kitty to the left of the page as shown. Stamp the kitty image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black on Iris cardstock. Colour with Zig Clean Colour Brush markers die cut with the coordinating die. Adhere to the centre of the card. Stamp the branch images from the HCPC-3867 Cherry Blossom Retreat Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge. Trim and adhere on the top left above the cart. Stamp the flower images from HCPC-3874 Purr-fect Posies Stamp set in Wisteria ink on the Deluxe Flower Shaping card. Colour with French Ultramarine ink and die cut with the coordinating dies. Colour the back of the flowers with French Ultramarine ink and shape using the coordinating mold. When dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Lemon Chiffon Prills to the centres of the flowers with Dries Clear glue. Adhere over the branch as shown and around the kitty. Add a little birdie above right of the kitty. Stamp the bird images from the HCPC-3866 Tweet Cherry Blossom Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter to the birds using Dries Clear glue on a dry sponge and add birds around the flowers. Stamp the pawprint image from the HCPC-3877 Playful Miss Kitty Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the page as shown.

Add Moon Dance glitter around the openings of each page with Dries Clear glue. Dot Nuvo Pure Shimmer Glitter - Diamond to all the pages with Dries Clear glue.

Other Products: Cardstock (White, Lavender), Beads, Pearls, Waterbrush, Archival Ink (Shadow Grey), Distress Oxide Ink (Tumbled Glass, Worn Lipstick), Scrapbook Adhesives by 3L (Creative Photo Corners White, 3D Foam Squares White Mix, Dual Brush Glue Pen, E-Z Runner Ultra, Adhesive Dots Micro, Thin 3D Foam Squares), ColorBox Dyestress Ink- Inchworm

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Cut a piece of lavender cardstock to 6 x 12" and fold in half. This is your card base. Cut a piece of the plaid patterned paper that is 5.75 x 5.75" and adhere to the card base using white photo corners. Cut a piece of the purple patterned paper that is 4.75 x 4.75" and adhere to the card base. Cut a piece of the cream patterned paper that is 4.25 x 4.25" and adhere to the card using 3D foam squares. Cut 2 pieces of the blue border strip that are 4.25" in length. Adhere one strip to the bottom using regular adhesive and the other to the top using 3D foam squares. Find and cut out the "Hope Your Day is Purr-fect" sentiment and adhere to the bottom of the card using Thin 3D foam squares.

Stamp and die cut 1 of the cats on a swing image onto white cardstock using black ink (Archival Ink- Jet Black). Add color to the image using Zig Clean Color Real Brush Markers and a water brush. Swing- Brown, Dark Brown, Mid Green; Orange Cat- Bright Yellow, Orange, Light Carmine, Cobalt Blue; Grey Cat- Light Grey, Blue Grey, Light Carmine. Adhere to the card using Thin 3D Foam Squares.

Stamp and die cut 1 set of the smallest, and medium sized posies using grey ink (Archival Ink- Shadow Grey). Stamp and die cut 2 of the posie vines using grey ink. Add color to the leaves and vines using light green ink (ColorBox Dyestress Ink- Inchworm) and daubers. Add color to half of the flowers using light blue ink (Distress Oxide Ink- Tumbled Glass) and daubers. Add color to the other half of the flowers using light pink ink (Distress Oxide Ink- Worn Lipstick). Shape the vines using the Deluxe Flower Shaping Kit. Shape the flowers using the 3D Posie Shaping Mold. Add light blue beads to the middle of each blue flower and pink Prills to the middle of each pink flower using liquid adhesive.

Adhere the flowers to either side of the swing using adhesive dots, and then add bits and pieces of the posy vines among the flowers. Add pearls to the sentiment square.

Other Products: Gallery soft pastels: gray, light blue, light orange, green olive, Hot glue gun, 3D tape, white cardstock

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Create a 6 x 6" card base using white paper. Cut a piece of paper from the Purr-fect Posies Paper Collection 5 3/4 " x 5 3/4 " and adhere to the card base using Dries Clear Adhesive. Cut from white paper collection paper fancy pocket using Regal Pocket Accents Die and place on the top of card. Cut out one of rectangle base from paper collection and place using 3d tape.

Stamp fence using Tulip Cart & Fence Cling Stamp Set on the white paper using Ranger Archival Ink Pad - Jet Black cut out with the coordinating die, shade using gray oil soft pastel. Place on the card using 3D tape.

Stamp the leaves using Purr-fect Posies Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green , cut out with the coordinating die, shade using this same ink and shape using Purr-fect Posies Shaping Mold

To create flowers stamp Purr-fect Posies Cling Stamp Set on white paper with Ranger Archival Ink Pad - Deep Purple and cut using the coordinating dies, shade using this same ink . Place the flowers in the Purr-fect Posies Shaping Mold and sprinkle water on. Go through machine. Wait to dry. Layer the petals together using the hot glue gun making sure to offset them. Using paint brush, paint ready flower with Designer Dries Clear Adhesive and sprinkle Rajni Chawla's Crystal Clear Glitter.

Stamp kittens using Purr-fect Playdate Cling Stamp Set with Ranger Archival Ink Pad - Jet Black on the white paper and cut using the coordinating dies, shade use soft pastels. Using paint brush paint ready flower with Designer Dries Clear Adhesive and sprinkle Rajni Chawla's Crystal Clear Glitter. Place on the card using 3d tape

Adhere the flowers, leaves and sentiment to the card using a hot glue gun.

Other Products: Watercolor Cardstock, Hot Glue Gun, Diecutting Machine, White cardstock, Gorgeous Grape cardstock

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Cut white cardstock to size 11 x 4 1/4". Score and fold at 5 1/2" to create a tent fold card base. Round the top two corners. Cut the first two folds off of the 4 1/4 x 5 1/2" Foldout Card. Cut paper from the Purr-fect Posies paper collection at 4 3/4 x 4 1/8" and use the Classic Borders Basics plain edge die to cut the edge to match the fold out card. Ink the edges with Majestic Violet ink and adhere to the outside fold. Cut paper from the collection to 5 3/8 x 4 1/8", round the corners, ink the edges and adhere to the inside fold. Add dries clear adhesive to the bottom and side edges and adhere to form a pocket. Diecut the Regal Pocket Accents twice from Gorgeous Grape cardstock, adhere together, sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear Glitter. Adhere to the back of the pocket. Diecut the Delicate Border Basics Die from Gorgeous Grape cardstock, sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear Glitter. Adhere to the front of the pocket and trim the edges to fit. Adhere the pocket to the front of the card base. Cut paper from the collection to 5 3/8 x 4 1/8". Stamp the sentiment from the Purring and Playful Cling stamp set using Majestic Violet ink, round the corners, ink the edges and adhere to the inside of the card.

Stamp the Purr-fect Posies on Deluxe Flower Shaping Paper twice using Majestic Violet ink, color with the same ink, diecut using the coordinating die, add more ink to the edges and shape using the Purr-fect Posies Shaping Mold. Adhere two petals together, offsetting to create the larger flower. Add Heart of Gold Prills to the centers of the double and single flowers. Sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Stamp the Purr-fect posies leaves on Deluxe Flower Shaping Paper with Archival Olive ink, color with the same ink, diecut using the coordinating die, add more ink to the edges and shape using the Purr-fect Posies Shaping Mold. Sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Adhere the flowers and leaves to the card front using a hot glue gun. Diecut one of the tags from the paper collection. Diecut the border tag from Gorgeous Grape cardstock, adhere together, punch a hole in the top of the tag and add a piece of ribbon. Insert into the pocket.

Add some sparkle to the card front by adding Transparent Ultrafine Crystal glitter.

Other Products: Chrome Yellow Archival Ink, Peeled Paint, Faded Jeans, Dried Marigold, Seedless Preserves, Worn Lipstick, Scattered Straw, Vintage Photo, Walnut Stain Distress Inks, White Cardstock, Watercolor Paper, Purple Cardstock, Dimensional Tape, White thread, Sizzix Vagabond

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: My card size is 5 x 7". Make card base and cover with a piece of the paper collection. Cut out the Regal Frame Die using purple cardstock and a piece of the paper collection. Using dimensional tape, adhere to card front.

Stamp the kitty onto watercolor paper using black ink and then using a brush, water and the Distress inks, color the image. Once the ink dries, sprinkle glitter over the image and adhere to card front with dimensional tape.

Stamp the flower petals with yellow ink and use a dauber to color the centers of the petals. Color the leaves with Fern Green ink and color with a dauber. Cut out using the coordinating dies. Lay flower petals and leaves onto the mold and spritz with water. Run through the Vagabond 2 and then lay out to dry. Once dry, glue two petals together to make flower. Add Prills to the centers and sprinkle with glitter and allow to dry. Once dry decide on placement on card front and glue down.

Stamp the sentiment with Deep Purple ink and use the tag die to cut it out. Loop thread through the hole and glue a flower and leaf over the end of the string to hold it in place. Use a piece of dimensional tape to go behind the tag and hold it in place. The card is finished.

Other Products: White, Rose, Pink and Brown cardstock;

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: For instructions on how to make and assemble this mini album go here. 

Using the Eyelet Rectangle and Basic Die cut 4 out of white cardstock and adhere to the four front panels. Use the next die down from the set and cut out 4 of the Kitten pictures from the Purr-fect Posies paper collection and adhere to the ones you just added.

Stamp the leaves on the Deluxe Flower Shaping paper with the Leaf Green ink, color in with the Vivid Chartreuse and cut out with the coordinating die, ink the edges with the same Leaf Green and place in the Leafy Accents mold, adhere to the top of each of the four panels on the front as shown.

Stamp the flowers on the Deluxe Flower Shaping Paper with the Plum ink, color the centers with the Vivid Chartreuse and cut out with the coordinating die, ink the edges with the Vibrant Fuchsia and place in the mold, finish shaping by adding 2 of each flower petals together and pressing down the middle. Arrange and add on top of the leaves.

For the roof, add a sentiment from the paper pack along with a flower and leaves as shown.

For the inside add the colored cardstock panels along with the sentiment that in stamped on the Butterfly Kisses circle.

To finish, add glitter and prills to the leaves and flowers.

Other Products: Cardboard, pipe cleaner, bell, wool yarn, empty tape rolls, paper towel rolls, sticky tape white, Distress Ink- Vintage Photo, hot glue gun, cord, Crop a dile, White cardstock.

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Click here to view a larger photo of this project. Cut a piece of cardboard 7 x 7 inches. Cover the edges with the sticky white tape then cover it with the designer paper from the paper collection. Glue a piece of cord around the edge. Take 2 empty paper towel rolls, make one shorter than the other and cover them with the sticky white tape, then glue them down in the center of the platform. Take the empty tape rolls and cover them on the inside and outside with paper from the collection and ink the edges with the Distress ink. Place one on top of the shortest pole and one in front of it on the bottom. Cut a piece of cardboard 5 x 5 inches and cover it with paper from the collection and glue this on the longer pole, make a hole in it with the Crop A Dile. Curl the pipe cleaner around a pencil and hang a bell on the end, then pull it through the hole on that platform.

Stamp the cats from the purring and playful set with Jet Black on white cardstock, die cut and color with the Zig Clean markers in the colors you like. Then place all the cats on the cat pole, make a ball of the wool yarn and glue that down.

Other Products: Diecutting Machine, White Cardstock

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut card base 5 x 7 inches in white card stock. Cut out the cat panel from the Purr-fect Posies Paper Collection. Cut the rectangle die from the Intricate Swirl Frames Die in white cardstock, cut out a Regal Pocket Accents die in white cardstock, cut out a dark purple piece from the paper collection that is 5 x 7" and distress. Adhere Regal Pocket Accents die to the top of the card, then the purple piece to the card base, adhere Intricate Swirl Frames Die on top and then the cat panel on top of that.

Stamp the cat from the Playful Miss Kitty Cling Stamp Set in black, color with Zig markers and cut out with corresponding dies, fussy cut the foliage off the kitty. Cut out the sentiment from the Purr-fect Posies Paper Collection, distress, and adhere the sentiment and cat as shown with foam tape.

Stamp the flower spray from the Purring and Playful Cling Stamp Set in Lulu Lavender on the blossoms and Bamboo Leaves on the stems, cut out with corresponding dies and sponge with same colors. Stamp the pansies from the Cheery Pansies set in Lulu Lavender, sponge with Buttercup centers and Lulu Lavender, cut out with corresponding dies, and sculpt with the 3D Pansy Shaping Mold, add yellow prills to the centers. Sponge blossoms with adhesive and cover with Crystal Clear.

Stamp, and sponge leaves from the Cheery Pansy set in Bamboo Leaves, cut out with corresponding dies and sculpt with the 3D Pansy Shaping Mold. Adhere flowers and leaves as shown.

Other Products: White cardstock, ribbon,

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

Instructions: Card size: 6 x 6". The top of this card is shaped, so take a piece of 12 x 6" white, fold it in half then use the outside part of the Elegant Pocket Accents die over the fold leaving the top of the die off the fold so that it does not cut the card in half but leaves the fold intact (about 1" of the fold). Cut another panel for the front with the full die cut at the top and also a purple decorative paper front of the same cut. Glue the purple to the card front, cut a slit for the pocket and then glue this stack to the front of the folded card base leaving the pocket section open to insert tag. Cut 1 Elegant Pocket Accents including the corners in that set, out of white also cut 2 decorative Pocket Accents out of white. Glue the decorative Elegant Pocket Accents to the top matching edges and glue the 2 Decorative Pocket Accents to the slit part of the front, one facing up, one facing down. Glue corners to each of the bottom corners.

Stamp Happy birthday on a piece of white cardstock and use the long die in the Tickets and tags set to cut it out, shortening it to suit. Cut the large tag from this set and the tag top out of white, the smaller tag and tag top out of decorative paper, cut one small oval tag from the decorative paper. Glue the decorative tag to the white and the same with the tag top, glue the small oval to the tag at the top after inserting a ribbon.

Stamp Lush Lilac blossoms on Deluxe Flower Shaping Paper, sponge with purple and die cut, shape with Mold and add glue green Prills to the centers of each blossom. Stamp the small Lilac spray with Fern Green, sponge with Vivid Chartreuse and die cut. Glue the sprays to the card, 1 on each side at the bottom, 1 on left top. Glue Lilac blossom on top of sprays and a few on top of tag. Randomly glitter the entire card. Add some purple Prills in clusters along some of the Lilac blossoms.