Instructions:

Cut a piece of Deluxe flower Shaping Paper 10” x 7”, score at 5 “ along the long side and fold to create a base card of 5” x 7”.  Cut a piece of pattern paper with the window frame 4 7/8” x 6 7/8” and adhere to the front of the card.  Add Ultrafine Crystal Glitter to the paper using Dries Clear Glue.

Cut a piece of Deluxe Flower Shaping Paper 7” x 8”.  Score along the long side at 1/2”, 1”, 1 1/2”, 6 1/2”, 7” and 7 1/2”.  Fold the sides to create a small concertina effect. 

Cut another piece of pattern paper with the window frame 4 7/8” x 6 7/8” and adhere to the centre of this panel.  Die cut the window panes out using the dies from the Window Frame Die. Adhere the front panel to the base card front using strong double sided tape on each end 1/2” lining up the front image with the back image. This will create a shadow box effect.

Stamp two window frame images from the HCPC-31016 Ornate Window using Black Tuxedo ink on Neenah 80Lb Classic Crest cardstock. Colour the images with alcohol markers  and die cut one entire frame including the window panes and one with the ornate header only. Adhere the ornate header to the base frame and then adhere to the front of the shadow box. Add snow effects with Texture Paste and Ultrafine glitter.

Stamp the fruit, ivy, birds and holly eaves images from the HCPC-31026 Christmas Lantern Cling Stamp Set, HCPC-31027 Festive Berry & Birdies Cling Stamp Set and the HCPC-31028 Christmas Holly Accents Cling Stamp Sets in Tuxedo Black ink on Neenah 80LB Classic Crest Cardstock. Colour the images using alcohol markers and die cut with the coordinating dies. Die cut plain images using the coordinating dies and then adhere the coloured  images to the plain die cuts. Adhere the holly leaves on the bottom left and top right of the window frame and add the fruit images as shown. Adhere the birds with the flowers and leaves to the top right and bottom left of the window frame over the holly leaves with pop dots.  

Stamp the leaf filler image from the HCPC-31028 Christmas Holly Accents Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green ink and die cut with the coordinating die. Adhere around the holly and birds as shown.

Add green and pink sequins around the birds and leaves. Add Minnie Pearl Prills to the leaves on the top right and around the leaves. Add Frosting Powder randomly to the leaves with Dries Clear glue on a sponge.

To finish, stamp the Christmas Sentiment from the HCPC-31026 Christmas Lantern Cling Stamp Set in Obsidian ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Die cut a plain die from Deluxe Flower Shaping Paper and adhere the stamped images to the top of the plain dies and then adhere to the top left of the card as shown.

Other Products: Copic markers - G28, Y17, BG23, RV29, R46, RO2, B23, B05, B02, Neenah 80LB Classic Crest Cardstock, strong double sided tape, Sequins - Craft Medley Cup Sequins Go Green, Princess

Instructions:

The ready-top fold card measures 4 1/2″ by 8 1/2″. For the card, front choose the pattern paper from the designer paper collection and cut it 1/8" smaller than all sides of the card panel. Create another panel by choosing the coordinating paper from the same paper pack and add a gold mat using Luxe Gold cardstock. 

Cut 2 pieces of die cuts one each from white and Luxe gold cardstock using the Palace Gateway Die. Cut apart the center to create an open window and glue them together keeping the gold one little off-center to create shadows. Layer the prepared gate on the card front as shown. 

Next, stamp all the required images from HCPC-31027 Festive Berry & Birdies Cling Stamp Set and HCPC-31028 Christmas Holly Accents Cling Stamp Set with black archival ink on smooth white cardstock and paint them using Zig Clean Clear Markers. Once done with the painting, cut the images using their coordinating dies. Glue an extra die cut on the back of the painted image for extra strength. 

Use Clematis stamp and die set to create small Poinsettias. Stamp the Clematis florals using Versamark ink on Rajni Chawla's Vellum Flowerite cardstock and sprinkle golden heat embossing powder. Dust extras in the funnel tray and heat set it using a heat tool. Cut the florals using its coordinating die set and color the flowers using Festive Berries Distress Oxide and shape them using shaping tools. 

Once ready with all the elements, layer and glue all the painted images as shown and finish the card by adding a stamped, die-cut sentiment from the same collection.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Heat gun, VersaMark, Festive Berries Distress Oxide, Funnel Tray.

Instructions:

Card size:  5 x 6 7/8”. Make a shaped card with the outer die of the Simply Classic Rectangle Frame (see video: How to Create Decorative Shaped Cards for All Occasions heartfeltcreations.us). Cut another front from decorative striped and decorative light blue papers. Use the Decorative Frame in the die set to cut out the light blue piece. Glue the striped piece to the card front then cut a white and a gold decorative frame with the same die. Glue the white and gold together slightly off-set then glue to card . Glue the blue paper inside frame.

Use the curved edge rectangle to cut away the card front center making a window to the inside. Use the light blue scrap to cut the smaller center rectangle then glue it to the center of window (inside card). Use the smaller decorative rectangle die to cut out a white and a gold frame for the center around blue. Glue them together off-set then glue to inside of card around blue center rectangle.

Stamp birds (3 different birds, 1 with poinsettia) and 2 pomegranate using black ink, die cut then cut away greenery from 2 smaller birds and color all. Round backs of birds and pomegranates slightly then add foam to backs. Add small birds to the pomegranates then glue to the left top and right bottom corners of the window frame. Glue the poinsettia bird to the inside right.

Stamp sentiment using Vermillion, die cut, then pop up on the inside of card left of the poinsettia bird.

Use Stickles or other glitter to make the greenery and pomegranates sparkle. Use Nuvo on tiny filler.

Other Products: White cardstock, Crystal Stickles, Copics: R43, R24, RV29, B21, B24, YG94

Instructions:

The finished card measures 7 1/4 x 5". Take a 10 x 7 1/4" white base and fold it in half to make a top fold card. Cut a 7 x 4 5/8" piece of blue paper #6 from the Festive Christmas collection. Cut a 6 3/8 x 4 1/8" piece of paper from the Deluxe shaping paper. Cut a 7 1/2 x 2 3/8" piece of turquoise paper #6B from the Festive Christmas collection. Cut a 6 x 3 5/8" piece of red paper #9B from the Festive Christmas collection. Cut a 5 3/4 x 3 1/2" piece of pattern paper #6A from the Festive Christmas collection. Cut a 2 3/4 x 5 3/8" piece of pattern paper #9B from the Festive Christmas collection.Distress all the edge with the appropriate tool or the blade of scissors and glue all of them on each other and on the card base with 3D foam.

Stamp your poinsettia flowers with vermillion and manganese ink onto white flower shaping paper, color the center and shade the edge with the same color. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers add prills (Minnie) and arctic flakes on the edge of the flowers. 

Stamp your festive birds in archival library green ink on a watercolor paper.  Color with the Zig marker. Die cut with the appropriate die. Put 3D lacquer on the birds. Glue it in the center of your card. Do the same thing with leaves from Christmas holly accent.

Arrange your flowers and leaves on the left corner of your card. Add your birds next to it. Stamp in library green sentiment from the Christmas lantern sentiments.  Glue it under the birds.

Other Products: Water mister, hot glue gun, die cutting machine, scissors, ruler, arctic flakes, archival ink library green, watercolor paper

Instructions:

Ready tent fold card measures 5" × 7". First cut a base frame from designer paper collection and white cardstock using dies from the Flourish Companion Frame Die Set. Distress edges with matching ink and glue on ready card base using dimensional tape. Cut a decorative frame from white cardstock and gold cardstock using die from the same set. Glue both together and adhere it on card. Stamp lantern image and other elements on watercolor paper using black archival and paint with zig markers. Cut images with coordinating dies. 

Stamp poinsettia flower on deluxe flower shaping paper using red geranium and cut with coordinating die. Paint flowers using red geranium and vermillion ink. Shape flowers using shaping mold. Slightly shade flower edges with gold ink. Layer flowers and add prills to the center of flower using hot glue.

Stamp some branch images using coffee ink on white cardstock using Sweet Magnolia Buds Stamp Set and paint using same ink. Cut with coordinating die. Arrange all elements on card using hot glue as pictured. Stamp sentiment on white cardstock using vermillion ink and cut with coordinating die. Cut more 5 pieces from white cardstock. Glue all pieces together to add dimension. Glue it on card as pictured.

For finished look, apply Crystal Clear glitter on card using adhesive that dries clear. 

Other Products: Smooth White Cardstock, Watercolour Paper, Dimensional Tape

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper collection measuring 5.25" ×7.25", adhere it on ready card base. Cut another mat from designer paper collection measuring 4.75" × 6.75", adhere it on white cardstock measures 5"×7". Glue it on card using dimensional tape.

Cut a oval frame from white cardstock and designer paper using oval dies from the Simply Classic Oval Frames Die set. Cut an oval piece from vellum paper using big oval die. Also cut a decorative frame from white cardstock using dies from the same set. Arrange all the pieces on card as pictured. 

Stamp poinsettia flower on deluxe flower shaping paper using red geranium and cut with coordinating die. Paint flowers using red geranium and vermillion ink. Shape flowers using shaping mold. Slightly shade flower edges with gold ink. Layer flowers and add prills to the center of flower using hot glue. Stamp some leaves using olive green ink and other elements using black archival on deluxe flower shaping paper. Paint leaves using leaf green ink and other elements using zig markers. Cut with coordinating dies. Stamp some branch images from Sweet Magnolia Buds stamp set using coffee archival and paint with same ink. Cut with coordinating die.

Arrange all elements on card using hot glue as pictured. Stamp sentiment on white cardstock using vermillion ink and cut with coordinating die. Cut more 5 pieces from white cardstock. Glue all pieces together to add dimension. Glue it on card.

Other Products: Smooth White Cardstock, Watercolor Paper,Dimensional Tape

Instructions:

Make a slim line card base measuring 8 3/4" by 3 3/4"  from maroon coloured card stock. Add a mat layer of white card stock a little smaller than the base. Cut pattern paper from the paper collection and add to the white mat layer. Cut an A2 card panel from the paper collection. Add a white mat layer at the back and add to the Card front.

Cut the slim line decorative die cut in luxe gold paper. And add to the two sides of the A2 panel. Cut gold scalloped die cut from oval decorative frame. Add vellum circle and add  a Christmas sentiment .

Stamp the holly leaves and the birds with Jet black ink on Deluxe flower shaping paper and colour with zig markers. Cut with coordinating dies and add to the card. Stamp the large poinsettia flowers on to Deluxe flower shaping paper. Colour  with carnation red ink. Color with red inks and cut with coordinating die. Shape the flowers in the 3D flower shaping mold. Layer the flowers and add prills in the centre. Add the flowers on the card.

Other Products: Die cutting machine, scoring board. Hot glue stick, hot glue gun.

Instructions:

Cut out a 5 3/4" x 5 3/4" white paper base, then cut a slightly smaller square from your paper collection and glue it to the base. Next, cut a 5 1/2" x 5 1/2" square from the gold paper and glue. Cut two 4 3/4" x 4 3/4" and 4 1/2" x 4 1/2" squares from the paper from the collection and glue them with Double Dots 100pc. - 3D Foam.

Cut a frame from the Simple Centerpiece Die set from the gold paper and glue it to the card.

Stamp the pieces from the Christmas Holly Accents set with embossing ink then sprinkle with gold powder and heat with the embossing heater, then cut out with matching dies and color with watercolor markers. Cut out elements matching the sentiment from the gold paper and paper collection, then glue them under the sentiment so that they stick out a little.

Arrange everything as shown.

Other Products: Embossing ink, cutting machine, watercolor markers,

Instructions:

Create base using outside Fancy Classic Rectangle Frame. Die cut two pieces from white cardstock, glue it together on the top. Using same frame, die cut from paper collection paper, and place onto card using Foam Strips for dimension. Cut decorative frame from Luxe Silver paper and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and silver paper, stamp sentiment using Christmas Lantern Cling Stamp Set with Ranger Archival Ink Pad - Jet Black, place on the top of card using adhesive foam strips.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter. Pierce the center and glue in some stamens using hot glue gun.

To Create the leaves, stamp Christmas Poinsettia & Holly Cling Stamp Set and Christmas Holly Accents Cling Stamp Set with Jet Black Archival ink and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create ornaments, stamp the Festive Berry & Birdies Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Black jet, cut out with the coordinating die, coulor using pencils. Place on the top of card using adhesive foam strips.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions:

To make the card base, cut 2 pieces of White cardstock measuring 8 x 6 inches and 8 1/2 x 6 inches. To the large piece, make a score at 1/2 inch along the longer side and fold. To this piece, cut an oval at the exact center using the plain oval die from HCD2-7426 Oval Filigree Frame Die. 

Cut a piece of Navy Blue pattern paper from HCDP1-2152 Festive Christmas Paper Collection to 1/8th inch less than the card base and cut a similar oval in the center using the same die. Align and adhere this piece to the card front. Cut another piece of pattern paper with the same size and adhere it to the inside card panel. Adhere both the panels along the folded hinge to create a top fold card base. 

Using vellum sheet, cut an oval slightly larger than the frame on the front panel and adhere it to cover the opening of the frame. Using HCD2-7426 Oval Filigree Frame Die again, cut 2 pieces each of the different sizes of the decorative ovals from the set. Stack and glue each of the pieces and add crystal clear glitter by sponging some dries clear glue.

Adhere the larger frame over the opening on the front panel and the medium sized die-cut to the exact center of the vellum. Take the medium oval blank piece and sponge the center slightly with Tiger Lily and the edges with Sunflower inks. Adhere this panel to the back of the vellum aligning exactly with the medium sized oval piece. 

Use the smallest die-cut piece to add the sentiment from HCPC-31026 Christmas Lantern Cling Stamp Set and adhere it to the bottom of the oval frame as shown using dimensional tape. Stamp the images from HCPC-31026 Christmas Lantern Cling Stamp Set and HCPC-31028 Christmas Holly Accents Cling Stamp Set onto White cardstock with Obsidian Black ink and color using water colors. Cut the images using their coordinating dies and add Nuvo glaze on the berries. 

Arrange the ready elements on the card front using dimensional tape and finish off the card by adding White flat back pearls around them as shown.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, White flat back pearls, Nuvo Morning Dew crystal drops, watercolors, water color brushes, Obsidian Black ink

Instructions:

Card size is 4 1/4 x 5 1/2”. Score and fold 8 1/2 x 5 1/2” Real Red cardstock at 4 1/4” on the long side to create side fold card base. Cut Luxe gold cardstock 2x to 4 x 5 1/4”. Cut white cardstock 2x to 3 3/4 x 5”. Stamp the ‘Wishing you a wonderful Christmas’ sentiment from Christmas Holly Accents Cling Stamp set on one of the white layers, adhere to a Luxe Gold layer and adhere to the inside of the card. Cut Real Red cardstock to 2 3/4 x 4”, cut Luxe Gold cardstock to 2 1/2 x 3 3/4” and cut white cardstock 2 1/4 x 3 1/2”. Dry emboss the two white layers using a holiday embossing folder. Then adhere the larger Luxe Gold and white embossed layers to the card front using dries clear adhesive. Adhere the smaller red, gold and white layers together using dries clear adhesive and adhere to the card front using dimensional tape. 

Stamp the ‘Merry Christmas’ sentiment from the Christmas Holly Accents Cling Stamp set on white cardstock using Real Red ink and diecut using the coordinating die. Diecut 4 more times from white cardstock, adhere the layers together to create a dimensional piece and adhere to the card front. 

Stamp the poinsettias and holly leaves from the Poinsettia & Holly Clusters Cling Stamp set on Real Red and Garden Green cardstock using Real Red and Garden Green ink, diecut using the coordinating dies and shape using the coordinating mold. Using a stylus from the Deluxe Flower Shaping Kit, cup the centers and adhere two flowers together and one holly using dries clear adhesive to create the poinsettias. Using a paint brush, add diluted dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Add Heart of Gold Prills to the flower centers and adhere the flowers to the card front as shown using hot glue. Use the Heat It tool to remove any hot glue strings.

Other Products: White Cardstock, Diecutting Machine, Misti, Hot Glue Gun, Real Red and Garden Green Cardstock, Real Red and Garden Green Ink, Holly Embossing Folder, Paint Brush, Dimensional Tape

Instructions:

Take a 9" x 4" card blank - tent fold, die cut with the outside edge of the Slim Ornate Rectangle Die. Make sure to leave the top edge free of the die so that the card can be opened. Die cut another one in green paper from the Festive Christmas Collection Paper Pad. Adhere to card front with Designer Dries Clear Adhesive. Die cut the next size down in white card, and the next size down again, in white card. Adhere to card front. Adhere the rectangle piece with foam tape. 

Stamp onto white card with Ranger Archival Jet Black ink, all the stamps from the Festive Berry and Birdies Cling Stamp Set twice. Stamp an extra single Birdie with holly berries. Color with Zig Clean Color Real Brush Pens in 050 Yellow, 041 Light Green, 045 Pale Green, 025 Pink and 066 Dark Oatmeal, using a Color In Watercolor brush. Die cut with the matching dies. Adhere first set of Birdies to card front. Adhere second set to the first set with foam tape. Cut the Birdie off the extra piece, adhere the flower and berries piece to card corner. Adhere the Sentiment to the white rectangle.

Sponge Dries Clear Adhesive over the Birdies, Berries and Holly, apply clear glitter. All done.

Other Products: White card, 9" x 4" card blank, die cutting machine, foam tape, clear glitter.

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut the piece of teal paper 4.5 x 3 inches from the Festive Christmas Paper Collection, adhere to the right side card front. Cut a 5 x 4.5 inch piece of decorative paper from the collection, cut a circle in the center with the Circle Basics Large Die, create a scalloped frame with the Decorative Circle Frames Die in white cardstock and adhere, and cut off the right end with Curvy Decorative Border Die. Cut the decorative die from this set in white cardstock and adhere as shown horizontally.  Adhere the left side of card with foam tape. 

Cut out three decorative swirls from the Rectangle Filigree Frame Die in white cardstock and adhere to corners as shown.

Stamp the sentiment from the Christmas Lantern Cling Stamp Set in Jet Black on white cardstock and cut out with the coordinating die, cut out several additional die cuts to adhere and add dimension. Cut out the inner die from the Slim Elegant Rectangle Die in light teal and the next larger in dark teal, adhere all together with foam tape.

Stamp the sprig from the Christmas Lantern Cling Stamp Set in Jet Black and sponge with Vivid Violet and Vivid Chartreuse, cut out with coordinating dies and add Frosting Powder.

Stamp the bird and bird vine from the Festive Berry & Birdies Stamp Cling Set in Jet Black, cut out with coordinating die and sponge with Rich Cocoa, Lady Bug, Coastal Coral, Paradise Teal and Vivid Chartreuse, add Frosting Powder and adhere the bird vine above the circle and the larger bird in the circle with foam tape.

Stamp the poinsettias from the Large Festive Poinsettia Cling Stamp Set in Lady Bug, sponge with same, cut out with coordinating dies and sculpt with the Large Poinsettia Shaping Mold, add stamens and Frosting Powder.  

Stamp the holly leaves from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with Vivid Chartreuse and cut out with coordinating dies, sculpt with shaping mold and add Frosting Powder.

Adhere poinsettias, sprigs, and holly as pictured.

Other Products: White cardstock

Instructions:

The finished card measures 9 x 4 inches. Cut one piece of white cardstock in Deluxe Flower Shaping paper 9 by 8 inches and score at 4 inches to make a side fold card. Place Slim Gateway rectangle die about 1/4” past fold so that fold does not get cut. Use the same die again on a piece of Burgundy card stock, cut and adhere on top. Die cut the second biggest die from the same kit in the Deluxe Flower Shaping paper and glue it on the card. 

Stamp the Small Wild Roses on Flower Shaping paper with black ink.  Color the center with Vibrant Fuchsia ink, cut out with the coordinating die. Highlight the edges with more of the Fuchsia ink. Place in the matching mold and run through the die cut machine to shape. Use the Golf tool and poke a small hole in the center of each flower. Add stamens and secure with hot glue.

Stamp the leaves on white with cottage Ivy ink, lightly color with Vivid Chartreuse ink. Cut out with the coordinating die. Highlight the edges with more of the Cottage Ivy. Place in the matching mold and run through the die cut machine to shape. Adhere the flowers and leaves on the card.  Add Glitter to all the leaves and flowers.

To finish, stamp the sentiment on white with Vibrant Fuchsia and cut out using the Ornamental tag die. Add foam dots on the back and adhere to the card.

Other Products: Paper Trimmer, Die cut machine, Hot glue gun, Burgundy card stock,

Instructions:

Cut a piece of white card stock measuring 5 1/2 x 8 and score at 7” creating a 1” flap at the top of the card base. Using the largest die from the HCD2-7384 Fancy Classic Rectangle Frame Dies cut through both layers with the top portion of the die hanging over the top fold of the flap. Cut a second piece of white card stock with the same die and adhere it to the back of the hinge creating the back of the top folded shaped card base. Using the same die, cut 2 more pieces, One from sheet 6A and another from piece 11B From the HCDP1-2138 Decorative Dragonfly Paper Collection. Adhere sheet 6A to the front of the card and 11B to the inside of the card. (NOTE: by adding the piece inside the card this will cover the seam where the card base was pieced together making the inside of the card finished. A small piece may need to be trimmed from the top to make it fit perfectly). Next using the second largest die from the same die set cut 2x, once from white card stock and once from Luxe Silver Card Stock. Layer the white on top of the silver and glue together slightly offset so that the silver peeks out from behind the white. Adhere this to the card front. 

Stamp the HCPC-3951 Large Floral Butterfly Cling Stamp Set onto white card stock using Versacolor White Embossing ink. Heat emboss with white embossing powder. Using two soft dye based ink colors with blender brushes lightly blend the colors over the heat embossing on the left wing to create a soft blended look. Using the HCD2-7352 Large Butterfly Die set, die cut the butterfly out and fussy cut around the body so that only the body and the left wing remains. Stamp a second body for the butterfly in the same manner and fussy cut the body out. Using Vellum die cut the decorative die from the butterfly set and lightly ink that as well before gluing the body to the body of the butterfly. Cover the glued vellum area with the fussy cut butterfly body. Small glue dots can tack the vellum down to the background and be covered by gems on the butterfly wings if desired. Glue the butterfly to the card front. 

Using the HCFB1-5005 Magnolia Cling Stamp Set, stamp out the medium bloom image two times using French Ultramarine Archival Ink. Also stamp out 5 leaves with Leaf Green Archival Ink. Before die cutting, color using the HCDA1-449 Stack and Store Daubers. Color the centers of the flowers using Viridian Archival Ink and the outer edges with the French Ultramarine ink. Color the leaves with Leaf Green. Die cut with the coordinating dies. Deepen the edges of the flowers with the French Ultramarine ink and the leaves with Leaf Green, before running them in the coordinating 3D Mold. Using the HCST1-401 Deluxe Flower Shaping Kit press the centers of each flower and pierce a hole in the center of each before adding the HCS1-457-1 Pastel Pearl Stamens - Small in Green to the centers. Finish both with a dusting of Nida Tanner’s Magic Glitter Powder by adhering it with Dries Clear Glue and a Hydra Sponge.

For background flowers and leaves, stamp the floral stamp from the HCPC-3985 Dragonfly Florals Cling Stamp Set using Olive Archival Ink. Using English Ivy Archival ink stamp the leaves from the HCPC-3912 Cascading Wisteria Cling Stamp Set. Color the flowers in using Zig Clean Color Real Brush Markers and the leaves with Leaf Green ink. Die cut with coordinating dies. Ink the edges of the leaves with English Ivy ink.

Now arrange the flowers and leaves in the bottom right hand corner to complete the card. 

Other Products: Lawn Fawn Inks, Blender Brushes, Rhinestones, Nida Tanner’s Magic Glitter Powder, Scissors, Glue Sticks, Glue Gun, Paper Trimmer, Die Cut Machine

Instructions:

My finished card is 5 1/2" x 7 1/2". I made a tent fold card by cutting the Deluxe Flower Shaping Paper once to 5 1/2" x 7 1/2" and once to 5 1/2" x 8". Score the 8" piece at 1/2" then glue to the 7 1/2" piece to make the tent fold card. Cover the front of the card with a piece of Sheet 4A of the Feathery Florals paper collection. Die cut two pieces of the Delicate Daisy border die out of Deluxe Flower Shaping Paper and glue to the center of the card front.  Cut off what overhangs the bottom of the card.  

Stamp the Feathery Florals stamp twice onto Deluxe Flower Shaping Paper; once in Leaf Green and once in Magenta Hue. Color using inks and the Stack and Store Daubers. Cut out with coordinating dies and shape using the Deluxe Flower Shaping Kit. Cut off some of the greenery on the piece that was stamped in Magenta Hue. Glue the two pieces together.  

Stamp the Floral Feather stamps once using the Encore Gold and Cactus Flower and Forget Me Not using an ombre technique. Color using different inks and Stack and Store Daubers. Cut out using coordinating dies.  

Pour out some Designer Dries Clear adhesive and dilute with water then use a brush and paint onto the different pieces and sprinkle glitter. Add the Prills to the center of the flowers and allow to dry then glue everything to the side of the card front.

Cut a sentiment from sheet 6A of the paper collection and mat with a piece of Sheet 4A.  Add dimensional tape and adhere to the card front.  

This is a quick and easy design which packs a punch.

Other Products: Die Cut Machine, Dimensional Tape

Instructions:

Cut a piece of white cardstock and fold to get 8 1/8 x 4 1/4" base. Cut a piece of patterned paper from the Wild Poppy Paper Collection to 8 1/8 x  4 1/8". Cut out a white frame with Slim Star Lattice Rectangle Die, trim it a little in the middle, add 20" ribbon and adhere them to the base. Cut out a green frame with die No. 3 from the Slim Star Lattice Rectangle Die and the Wild Poppy Paper Collection.

Stamp blossoms from the Wild Poppy Cling Stamp Set in Magenta Hue and French Ultramarine inks onto Deluxe Flower Shaping Paper, color their edges  with the same ink, diecut with coordinating die and shape with mold. Add prills Power Outage to small flowers and Ribbit prills to big flower.

Stamp branches from Wild Poppy Bouquet Cling Stamp Set and Wild Poppy Accents Cling Stamp Set in Tuxedo Black and Magenta Hue inks onto Deluxe Flower Shaping paper, color them with pencils and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

Fold white cardstock to 4  x 9 1/4" with fold on the side then use the biggest die from the Slim Gateway Rectangle Die to cut leaving the left side of the die over-hanging fold by about 1/4". Cut a full front with the same die from the white cardstock and another one from the Floral Basket Paper Collection. Cut out a white frame with the die No. 2 from the Slim Gateway Rectangle Die. Stamp the sentiment from the Friend Floral Sentiment Cling Stamp Set in Forget Me Not ink and cut it out with coordinating die. Adhere all elements to the base as pictured.

Stamp 3 hollyhocks from the Hollyhock Stem & Blooms Cling Stamp Set in Tuxedo black ink, stamp 1 small hollyhock stem from the Hollyhock Fence Cling Stamp Set in Tuxedo black ink. Color them with colored pencils and cut out with coordinating dies. Adhere all elements to the base. 

Stamp blossoms from the Hollyhock Petals & Leaves Cling Stamp Set, big flowers stamp in French Ultramarine ink, smaller blossoms stamp in Buttercup ink, color their centers with the same inks, diecut with coordinating dies and shape with mold. Add Pastel Pearl Stamens Medium to all big flowers and Orange Juice prills to small flowers. Stamp 6 leaves from the Summer Wreath Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal

Instructions:

To make the card base, cut a piece of Ivory card stock measuing 9 x12 inches, score and fold it in half to create a base of 9 x 6 inches in size. Cut 2 pieces of pattern paper from HCDP1-2151 Floral Sentiments Paper Collection 1/4 of an inch less than the card base. Adhere 1 on the inside card panel and the second one on the front card panel along with Gold piece creating a thin frame around.  

Using HCD1-7367 Simple Centerpiece Die, create three 5" frames on Ivory cardstock; stack and glue them together. Cut another piece of Ivory cardstock with the 5" octagon and run it through the poppy embossing folder, shade the edges with Coastal Coral ink and adhere it to the octagon frame from behind.  

Use the HCD1-7370 Simply Elegant Centerpiece Die to cut 2 pieces from Ivory cardstock. Cut 1 piece into exact halves and adhere it to the top and bottom of the frame element. With the second piece, cut it into 4 sections and adhere them on the corners of the front panel as shown. using dimensional tape, adhere the frame element as well to the card center. 

Stamp a few of the images from HCPC-31024 Friend Floral Sentiment Cling Stamp Set, HCPC-31025 Grateful Floral Sentiment Cling Stamp Set and the sentiment from HCPC-31023 Special Floral Sentiment Cling Stamp Set onto White cardstock using Obsidian Black ink. Color all the images using watercolors and cut them using their coordinating dies. 

For the sentiment, cut few extra blank die-cuts; stack and adhere them to the center of the frame using dimensional tape. For the flowers, cut the ready frame from the Friend Floral Sentiment set into smaller pieces and arrange them on the octagon frame element as shown using dimensional tape. Similary cut out the little butterflies from the Grateful Floral Sentiment set and add them to the floral arrangement using dimensional tape. 

Using dries clear adhesive, add Gold micro pearls to the flower centers and the body of the butterflies. Finish off the card with some extra bling using rainbow rhinestones and hearts.

Other Products: Dimensional adhesive, Ivory cardstock, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, rainbow hearts and rhinestones, watercolors, water color brushes, Obsidian Black ink, Gold micro pearls, Poppy embossing folder