Instructions:

The ready top fold card measures 7″ x 7″. For making the card base you will need two pieces of cardstock measuring 7″ x 7″ and 7 1/2″ x 7″. Score the second piece on 1/2″ and crease well using a bone folder, making a hinge. Add glue on the hinge and secure the first piece on top. 

Choose the pattern paper from the Floral Banners Paper Collection and chop it to 6 1/2″ x 6 1/2″ using a deckled edge paper trimmer and layer it on the card front using double-sided tape. 

Cut a white die cut using HCD1-7281 Stairway Gardens Die and layer it as shown. Cut a coordinating paper from the same collection, a little smaller than the die-cut so that the white edge pops out from the bottom colorful paper. Cut four die cuts from smooth white cardstock using HCD1-7263 Swirly Accent Spray Die and adhere them, placing one each on all four sides as shown. 

For Red Asters, Stamp a couple of petals from Wild Aster Cling Stamp Set using Ranger Archival Ink Pad - Red Geranium Archival Ink and cut them using the coordinating die. Color the petals using the same ink and shape them using golf groove tools. Create 4 medium-sized Asters. Complete the flowers by adding matching seed beads in the centers.

Stamp, cut, and color a few wisteria flowers using Bright Tangelo and shape them using a flower shaping kit. Add flower seed beads using a glossy accent and use these flowers as fillers.

Stamp 2 sets of leaves using Leafy Accent stamp and Olive Green Archival ink and cut them using its coordinating die. Color the leaves using the same inks and shape them using a deluxe flower shaping kit.

Stamp the butterfly image from Floral Butterfly Accents Cling Stamp Set with Versafine on Rajni Chawla’s Vellum Flowerite and sprinkle white heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using the coordinating die. Color the butterfly using distress oxides. Also, white heat emboss a few pieces of foliage using Leafy Accent Stamp and die cut them using the coordinating die set.

White heat emboss the sentiment from HCPC-3843 Special Birthday Sentiments Cling Stamp Set on a strip of Rajni Chawla's Vellum cardstock and shape a little with your fingers. Adhere it on the right side bottom corner.  

Once all the elements are ready, assemble a small bouquet of flowers in the center and complete the card with white heat embossed vellum sentiment. 

Other Products: Smooth White Cardstock, Die-cutting machine, Score Board, Sharp Scissors, Double-sided tape, Hero Arts White Pigment Ink, Flower Seed Beads, Distress Oxides: Rusty Hinge, Carved Pumpkin and Deckled Edge Paper Trimmer.

Instructions:

Create a centre stepper card using a piece of white cardstock 6 x 12”. Line the card up portrait in a paper trimmer 1” from each side and cut from 1” to 7”. Lay in the Score-pal landscape and score up to the cut lines at 1, 2, 7” and between score lines at 6”. From the bottom 1” score line, fold each score as follows mountain, valley, mountain.

Cover the front and inside of the card with Moments in Time Paper Collection sheet 12B edged in Plum. Add 2 white cardstock strips behind strips from Moments in Time sheet 1A and adhere to the side and bottom 1” strips, run the ink pad around to cover the white edge.

Adhere Eyelet Frame Gateway Moments in Time sheet 5B onto white, edge in Plum and adhere on dots to the centre panel of the card. Die-cut in white cardstock Regal Lattice Gateway Die, edge in Plum and adhere on dots over.

Die-cut Simply Classic Oval Frame outline in Moments in Time 5B and in white cardstock together with the decorative die, edge in Plum and over lay together. Die-cut 9B in the smallest oval and edge in Plum. Overlay in white cardstock the decorative trim and stamp in Plum ‘Just a Note to Cheer You’ from the Cheerful Note Sentiments and adhere inside the card.

Stamp onto white cardstock in versafine onyx and clear heat emboss 2 Elegant Moments Timepiece and Timepiece Sentiment. Colour sentiment with distress Old Paper. Colour Elegant Moments Timepiece with Zig Clean Colour Real Brush Markers and water pen, edge with distress oxide Victorian Velvet and apply Wink of Stella clear to accents. Die-cut smaller Elegant Moments Timepiece with outline and circle die. Adhere clear cardstock behind opening. Adhere sentiment over clock face and mount over Elegant Moments Timepiece and onto the front of the card on dots.

Stamp in Fern Green Leafy Accents onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and Leaf Green. Place die-cuts into 3D Leafy Accents Mold, spritz lightly with water and run through the die-cutting machine. When dry add Dries Clear and Crystal Clear.

Stamp onto Deluxe Flower Shaping Paper Classic Rose in Rose Madder, colour in Pink Peony, die-cut edge the tips in Rose Madder and colour the back in Pink Peony. Stamp Classic Rose in Plum and colour with Lighthouse front and back and edge in Plum. Place die-cuts in 3D Rose Shaping Mold, spritz with water and run through the die-cutting machine. Each size rose has 3 sizes of petal, 2 smallest petals together to form a bud securing with hot glue, add 2 next size up petal and a further 2 next size up petals forming around the bud, securing with hot glue. Add Dries Clear and Crystal Clear, hot glue flowers, leaves and stamp from Moments in Time sheet 12A to the card.

Other Products: Paper trimmer, hot glue, wink of stella clear, versafine onyx, clear heat emboss powder, Distress Oxide Old Paper/Victorian Velvet

Instructions:

This tent fold card measures 7“ x 5“  when completed.

Using the outer die from the Fancy Classic Rectangle Frame die set and the white card stock, die cut two of these shapes. Die cut also one shape from the design paper from the collection paper pad sheet 4A . Adhere this to one of the white card stock shapes. Score  1“ across the top of the other white card stock shape, apply double sided tape and adhesive to the 1“ scored part. When placed together with the other card base shape this will form the tent fold card base.

Using the same die set, make the silver frame using the 2nd die in. Die cut a frame from both  the silver card stock and from the foam card stock. Adhere together using the clear drying adhesive. Adhere this to the card front.

From the same die set, take the 4th and 5th die in and the silver card stock and cut the shapes. Die cut also a oval shape from the Fancy Classic Oval Frame set. Adhere the oval to the card front using the foam 3D dots. Cut the 5th  shape in half then adhere to under the oval ends. From the 4th die cut, trim the ends off so they can be adhered under the banner on top of the oval later.

Taking the white card stock, the sepia ink and the Peony banner stamp, stamp the image. Stamp also the sentiment, then use the matching die set to die cut the shape. Bring color to the banner flowers and leaves by using the water color brush and the aqua pencils. The colors used are: Parakeet, Pesto Green, Verdant Green for the leaves and Violet, Mango, Carrot, Banana and Claret for the flowers and fillers. Bring a little shape to the flowers and leaves by using the flower shaping tools. Give the banner a curve by rolling it over your forefinger then adhere the banner to the silver oval on the card front with foam dots in the middle of the banner and clear drying adhesive at the ends, this will hold its curve. Align the silver card stock ends (pre-cut) and adhere in place.

Other Products: Spectrum Noir Aqua Pencils: Pesto Green, Bottle Green, Parakeet, Pesto Green, Verdant Green, Verdant Green, Violet, Mango, Carrot, Banana, Claret. Fussy cutting Scissors, Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Foam card stock.

Instructions:

Cut a white cardstock card base that is 6 x 12" folded in half. Cut a piece of burgundy patterned paper that is 5.75 x 5.75" and adhere to the card base. Cut out the next piece from one of the pre printed 6 x 6" card bases. Cut the outer trim off then adhere to the card front using foam tape. Add gems to the corners.

Die cut out the decorative circle from burgundy patterned paper. Cut the inner circle piece from Luxe Gold Cardstock. Stamp the sentiment using an embossing pad and burgundy embossing powder. Die cut out the sentiment to fit inside the gold mat. Adhere these layers together, then add to the card using foam squares.

Stamp and die cut 2 sets of each size of the wild rose using dark pink ink (Stampin Up- Cranberry Crisp) onto deluxe flower shaping paper. Add color to the middle of each flower using a light puroke ink (Stampin Up- Pale Plum) and daubers. Shape the flowers using the coordinating 3D shaping mold. Assemble the flowers and add beads to the middle of each using liquid adhesive.

Stamp and die cut the leafy accents leaves using dark green ink (Stampin Up- Handsome Hunter) onto white cardstock. Add color to the leaves using a lighter green ink (Stampin Up- Mint Macaron) and daubers. Shape the leaves using the coordinating 3D shaping mold.

Add the flowers to either side of the sentiment. Then add the leaves.

Other Products: Cardstock- White, Embossing Pad, Burgundy Embossing Powder, Beads, Stampin Up Ink (Handsome Hunter, Pale PLum, Cranberry Crisp, Mint Macaron), Gems, Scrapbook Adhesives by 3L (3D Foam Squares, E-Z Runner Ultra, Dual Tip Glue Pen, Crafty Foam Tape, Adhesive Dots Medium)

Instructions:

The pocket watch is made with the largest circle die from Simple Moments Timepiece. Stamp onto white cardstock in versafine onyx and clear heat emboss. Colour swirl design with Zig Clean Colour Real Brush Markers, die-cut with the largest circle die. Adhere this to a plain white cardstock circle for stability.

Stamp onto Luxe Silver and Luxe Gold cardstock Simple Moments Timepiece with Jet Black Stazon and die-cut with the largest circle plus smaller circle to create bands of different widths and trim off bell ringer with scissors. Die-cut largest circle in Clear Cardstock and adhere silver band over.

Die-cut in Luxe Gold and Luxe Silver Window Hinges and score in half, adhere half the gold hinge to the front of the clear cardstock window, trim down the back half and adhere to the back of the gold band. Adhere half silver hinge over the front gold hinge.

Punch a hole through the winder, adhere Luxe Gold clock face add Luxe Silver rim over coloured swirl layer. Adhere the gold band (+ clear cardstock cover) over the silver band with foam strip, securing the winder behind. Thread jump ring and chain through the winder.

Stamp onto white cardstock in versafine onyx and clear emboss 2x Timepiece Sentiment, die-cut with circle die and colour with distress oxide Old Paper and Victorian Velvet. Adhere back-to-back sandwiching a jump ring between to create the pocket watch fob.

Stamp onto Deluxe Flower Shaping Paper in Olive Classic Rose leaves, colour with Viridian, die-cut and edge in Olive and colour the back. Stamp onto Deluxe Flower Shaping Paper in Rose Madder, colour in Pink Peony, die-cut, edge the tips in Rose Madder and colour the back in Pink Peony.

Place die-cuts in 3D Rose Shaping Mold, spritz with water and run through the die-cutting machine. Curl 2 smallest petals together to form a bud securing with hot glue. Adhere next size up petal and a further 2 next size up petal around the bud. Adhere the rose to the leaves and onto the pocket watch fob. Add Dries Clear and Crystal Clear to the rose and leaves.

Other Products: Paper trimmer, hot glue, versafine onyx, clear heat embossing powder, distress oxide Old Paper/Victorian Velvet, jump ring, chain, hole punch, pliers

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of designer paper from the Moments in Time Paper Collection, distress with Cocoa and adhere to card front.

Cut the large decorative die from the Simply Classic Oval Frame Die in white card stock and adhere, cut the next smaller die in Luxe Gold card stock and adhere.

Stamp clock from the Elegant Moments Timepiece Cling Stamp Set in Jet Black twice, cut out with coordinating dies, and color the outer part of the clock on one and the inner part of the clock on the other with Zig markers. Cut out circle around clock face in Luxe Gold Card stock and adhere to the inner clock piece. Distress clock face with Rich Cocoa and adhere the inner part of clock with adhesive backed foam to the main clock as shown in photo. Adhere clock to card front with adhesive backed foam. Stamp and cut out extra clock hands, add 3D Crystal Lacquer and adhere to clock face.

Cut out four corner dies in Luxe Gold cardstock with the Simply Classic Oval Frame Die and adhere to each corner.

Stamp the Sweet Magnolia Cling Stamp Set in Rose Madder, cut out with coordinating dies and sponge with same, sculpt with the 3D Magnolia Shaping Mold and add stamens and glitter.

Stamp the leaves from the Sweet Magnolia Cling Stamp Set in Fern Green, cut out with coordinating dies and sponge with same.

Cut out the sentiment from the paper collection and distress with Rich Cocoa.

Arrange and adhere flowers, leaves and sentiment, as shown.

Other Products: white cardstock, adhesive backed foam, Bristol Smooth Cardstock

Instructions:

Ready side fold card measures 5.5" × 7.5". Cut a mat from designer paper measuring 5 3/8" × 7 3/8", adhere to the ready card base. Cut another mat from designer paper measuring 5" x 7" and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Stamp sentiment on it using black archival ink. Cut a frame from white cardstock using Eyelet Lace Frames die. Glue it on a card using foam dots.  

Other Products: White Cardstock, Hot Glue, Satin Cord, Flat-Back Pearl

Instructions:

Other Products: Diecutting machine, water mister, scissors, hot glue gun, ribbon, stampin’ write melon sorbet, nuvo pen aqua shimmer,

Instructions:

This tent fold card measures   8 1/4“ x  5 3/4“ when completed.

Taking the white card stock to make a card base to the above measurements. Using the sheet 4A from the Floral Banners Paper Collection, cut this a little smaller than the card front. Ink the edges of the paper with the dauber and the Venation Orange ink. Adhere to the card front with the double sided tape.

Make the frame by using the Fancy Classic Oval Frame die set, first using the outer die to cut a frame base. Die cut one from the sheet 4A and a second from the white card stock. Adhere these both together using the double sided tape. Adhere to the card front using the 3D foam dots.

Using the gold card stock die cut the thin frame from the second die in from the outside of the same die set. Adhere this to the frame base using the clear drying adhesive. To make the large circle frame, take the gold card stock and the 4 th and the 5 th die in, use together and die cut two. Place and adhere on the card front frame as shown.

Taking the Vining Clematis banner stamp and the sepia ink to stamp the image. Stamp also the sentiment from the Cheerful Note Sentiments stamp set. Die cut the banner with the matching die. Use the spectrum Nior aqua pencils to bring color to the flowers and leaves on the banner: The Clematises: Claret, Mango, Verdant Green. The Leaves: Pesto Green. Adhere the finished banner to the card front.

The birds are taken from the Clematis Birdhouse sets and the butterflies and bees are taken from the Peony and Sunflower sets. Stamp these with the sepia ink onto the white card stock. The colors used are from the aqua pencils, they are: The leaves: Pesto Green. The birds: Apricot, Aqua, Mango. The bees: Orange, Mango. Butterfly Claret, Mango, Forest Green. Die cut these by using the matching dies. Bring shape to these by using the shaping tools. Fussy cut the birds feet away and adhere to the card banner as seen in the project photo.

Make the Clematis flowers by: Stamping, coloring and die cutting six large petals, five smaller petals, one for each flower. The colors used for the flowers are: Claret, Mango, Verdant Green. Bring shape to the petals by using the collection 3D shaping mold. Use the pricking tool from the flower shaping set and make a hole in the petal centre, big enough to be able to get three folded stamens through it for the larger petals and two for the smaller petals. Adhere the stamens in place by using the hot glue gun. When the glue is cooled you can trim away the excess stamen stems ready for use. Arrange and adhere to the banner ends using the hot glue gun. Adhere the birds, butterflies and bees in place also using the hot glue gun. Apply diamond stickles to the butterflies and bees wings. Apply the Lime Green stickles to the flower centres in the banner and the tips of the stamens.

Other Products: Spectrum Nior Aqua Pencils: Claret, Mango, Verdant Green, Pesto Green. Apricot, Aqua, Orange, Forest Green. Fussy cutting Scissors, Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Ranger Archival Ink Venation Orange, Diamond stickles, Lime Green. Stickles.

Instructions:

Cut a piece of 4 3/4" x 4 3/4" piece of pattern paper from Floral Banners Paper Collection and ink the edges lightly with Library Green Archival ink. Adhere it on a 5" x 5" white card base. Cut a 1" x 5" strip of pattern paper and white cardstock and adhere them together. Adhere this piece horizontally in the middle of the card. 

Stamp the sentiment from Special Birthday Sentiments Cling Stamp Set on a piece of pattern paper with Library Green Archival Ink. Cut this piece to 2 1/2" square. Slightly ink the edges with the same ink. Adhere this piece on a 2 3/4" square piece of pattern paper.

Die cut 2 pieces of pattern paper using the die from Simply Classic Rectangle Frames and ink the edges with Library Green Archival ink. Cut both the pieces in half length wise and adhere them behind the sentiment piece as shown. Adhere this piece down on the card base using double sided foam tape. Add a few rhinestones to add finishing touch.

Other Products: Rhinestones and double sided foam tape.

Instructions:

Make a square card base using white card stock. Cut white card stock 12” x 6” and score at 6” on the longer side. Fold to make a top folding square card.

Add a mat layer using white card stock cut to size 5 3/4" x 5 3/4" and adhere on the card front. Select a dark purple background pattern paper from the Moments in time paper collection and cut to size 5 1/2" x 5 1/2". Adhere this on top of the white mat layer.

Cut a piece of die cut using light pink pattern paper from the paper collection using the largest die from the Simple Centerpiece die set. Cut another piece using the same die using white card stock. Adhere the two pieces together and adhere the whole piece on the card front using foam dots.

Cut a die cut from the Elegant Hearts Centerpiece die set using the outer die from Luxe Silver card stock and adhere on the pink die cut.

Cut a  die cut from white card stock using the smallest die to fit the center part of the decorative die, from the Simple Centerpiece die set. Cut another die cut from pattern paper using the die smaller than the white die cut. Adhere the two pieces together and adhere the whole piece on the center of the decorative die cut.

Cut a die cut using the center die of the Elegant Hearts Centerpiece die set from white card stock and add to the centre of the card.

Stamp the rose flower images using the White pigment ink on Vellum paper, using the largest of the stamps. Stamp 6 times to get two flowers. For one flower, use two biggest flower and three medium sized flower. Add white embossing powder on the stamped images and set with the heat tool. Cut the flowers with matching die.

Colour the backside of the flowers with Victorian Velvet distress oxide ink. Spray the flowers with water on the front and shape them in the 3D flower shaping mold for Rose flower. Layer the flowers together using clear glue. Add stamens in the centre.

Stamp the leaves from the Classic Rose on Deluxe Flower shaping Paper using Library green ink and colour with Leaf Green green. Add some shading with Plum color. Cut with matching die and shape the leaves in 3D Rose shaping mold.

Make filler flowers using the smallest stamp from the Classic Rose stamp set. Stamp the flowers with Leaf green ink on Deluxe flower shaping paper. Add some color using the sponge dauber and shape them in the flower mold. Add a stamen in the center.

Arrange the flowers and leaves on the card front using hot glue. Cut a sentiment from the Pattern paper collection, mat it on white card stock and add to the card front to finish the card.

Other Products: White card stock, Distress Oxide ink-Victorian Velvet, Scoring board, Die cutting machine, Water mister, hot glue gun

Instructions:

Card measures - 8 1/4 inches by 8 1/4 inches. To create card base - cut out  a 16 1/2” x 8 1/4” piece of thick white card and score it at 8 1/4” (long side up). Fold using a bone folder along the score lines. Cut out one 8” x 8” piece of HCDP1-2134 Moments in Time Paper Collection and adhere it to the card front. Cut out 7 1/4” x 71/4” piece of thick white card and 7” x 7” piece of HCDP1-2134 Moments in Time Paper Collection, stack and adhere them together to the card front using 3D foam. Die cut cage from HCGP1-488 Luxe Gold Card using HCD1-7298 Decorative Cage Die, then cut it in half and adhere both parts to the card base as shown.

Stamp the 2 clock images feom HCPC-3971 Elegant Moments Timepiece Cling Stamp Set on HCDP1-2134 Moments in Time Paper Collection piece with Versamark,then heat emboss it with white embossing powder using a heat tool. Colour one clock with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers. Die cut all elements using matching HCD1-7379 Elegant Moments Timepiece Die, add additional layer of white card on the back and adhere final piece to the card front using 3D foam. Stamp the clock hands from HCPC-3971 Elegant Moments Timepiece Cling Stamp Set on HCDP1-2134 Moments in Time Paper Collection piece with Memento Dye Ink Pad - Elderberry, then colour it with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers. Die cut them using matching HCD1-7379 Elegant Moments Timepiece Die and adhere them on the top of the clock using Dries Clear adhesive with metal tip.

Stamp the leaves from HCPC-3752 Classic Rose Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Olive Grove, then color them with Memento Dye Ink Pads: Olive Grove and Bamboo Leaves using HCDA1-449 Daubers. DIe cut them with matching HCD1-7110 Classic Rose Die, then shape them with HCFB1-462 3D Rose Shaping Mold and HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card front as shown.

Stamp the clematis images from HCPC-3954 Clematis Cling Stamp Set on HCDP1-2134 Moments in Time Paper Collection with Memento Dye Ink Pad - Lilac Posies, then colour them with Memento Dye Ink Pad - Rose Bud using HCDA1-449 Daubers. Die cut them using matching HCD1-7355 Clematis Die, then shape them HCFB1-5006 3D Clematis Shaping Mold and HCST1-401 Deluxe Flower Shaping Kit and adhere them to the card front as shown.

As a final touch glitter the flowers and leaves  petals and decorate flower centres with pearls.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Bone folder, Scissors, Thick White cardstock, Tsukineko Versamark, White embossing powder

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of pink pattern paper 4 7/8” x 6 7/8 and adhere to the front.

Die cut the outer frame using the No. 1 die from the HCD2-7381 Fancy Classic Oval Frame Die out of white cardstock and adhere to the front of the card. Die cut two outer frames from white cardstock using the no. 1 and No. 3 dies, stack together and adhere to the base frame using foam tape. Die cut an outer decorative frame using the No. 2 die from the HCD2-7381 Fancy Classic Oval Frame out of silver cardstock and adhere to the frame as shown.

Die cut three decorative frames out of white cardstock using the Nos. 3 and 4 dies from the HCD2-7381 Fancy Classic Oval Frame Die and adhere together. Adhere to the inside of the frame as shown.

Die cut an oval out of decorative paper using the No. 4 die from the HCD2-7381 Fancy Classic Oval Frame Die and adhere to the centre of the frame. Die cut the inner decorative frame out of white cardstock using the Nos. 4 and 5 dies from the HCD2-7381 Fancy Classic Oval Frame Die and adhere to the centre of the frame as shown.

Stamp the animal images from the HCPC-3916 Baby’s Friends Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere the elephant to the right of the oval and the rabbit, deer and sheep to the left of the oval as shown. Use foam tape on the deer for extra dimension.

Stamp the rose images from the HCPC-3915 Welcome Baby Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Add a small rose spray over the elephant on the right of the oval.

To create the roses, stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the centre of the flowers with Magenta Hue ink and die cut with the coordinating dies. Shape the petals using golf tools and assemble with hot glue. Add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves on the left side of the rose frames as shown. Adhere to the left of the frame under the animal images and over the rose spray on the right.

Stamp the rose leaf images from the HCPC-3752 Classic Rose Cling Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour the images with Leaf Green ink and die cut with the coordinating die. Colour the edges with Magenta Hue ink, shape using the coordinating mold and add Crystal Clear glitter with clear gloss gel medium. Trim and adhere around the roses as shown. Trim the painted rose images and adhere around the animals, roses and leaves.

Stamp the Baby image from the HCPC-3915 Welcome Baby Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the centre of the card.

Stamp the Welcome image from the HCPC-3915 Welcome Baby Cling Stamp Set in Vibrant Fuchsia ink on white cardstock. Die cut using the small rectangle die from the HCD1-7203 Ornamental Tags Die and adhere to the bottom of the oval as shown.

Other Products: Iris Cardstock, clear gloss gel medium, foam tape

Instructions:

Card size: 5” x 7”. Start by folding White cardstock measuring 7 1/2" X 11” in half to form a 5 1/2" x 7 1/2" card. Use the outer die of the Simply Classic Rectangle Frame to die cut card, hanging top of die over top fold by about 1/4" to retain fold. Cut the full outer die from white cardstock, pink decorative paper, and plaid decorative paper then glue the cardstock and pink paper to the front of card, glue the plaid paper inside, trimming the top to fit (avoid score). Use the smaller rectangular die (from the same die set) to cut out a window from card front only.

Die cut gold using the outer die and the large decorative together to create a gold frame. At the same time you can cut the inner decorative die from the inside of gold you are cutting. So, you will have 3 dies on the gold at once. Use the inner decorative die again on pink decorative paper. Glue the smaller decorative die cuts together off setting slightly. Glue the gold frame onto card front matching all edges. Die cut plaid decorative paper with the large decorative die then glue that thin die cut to the front matching inside edges of the gold frame.

Stamp the Heart Floral Banner using gray ink, die cut then color. Stamp the sentiment using Magenta Hue on white then use the inside die of banner to die cut. Pop it up on the heart shape. Glue the smaller rectangle die stack and heart to the inside of card in the center.

Stamp the roses using Magenta Hue, sponge then die cut. Stamp the leafy Accents with Fern Green, sponge with Leaf Green, die cut. Shape the leaves and the roses in their molds, misting lightly with water first. Let dry completely (be patient, it is important for shaping that they are COMPLETELY dry). Use the shaping tools to further shape rose petals pushing them down hard in the centers to create a bowl shape. Glue several layers together, (the bottom 2 should always be the same size to start the roses). The small bud inside is made pushing down the center while petals are stamp side down so that the stamp side shows while closing tightly. Using a hot glue gun for putting roses together helps quite a bit but it can be done with good adhesive like Dries Clear as well.

Cut leaves into groups of 2. Decorate outside of card on both sides of the window with roses and leaves. Be careful to avoid getting glue on the inside, you don’t want to glue your card shut! Open the card and add a sheer pink bow to 1 side of the heart (left bottom for this sample).

Glitter all the flowers and card base, try to avoid the metallic gold paper. Sponge a bit of glue on the bow and glitter it too.

Other Products: White cardstock, Copic Markers: RV10, RV02, RV04, YG61, G82, ribbon, London Fog Memento Ink

Instructions:

It's a ready folding card measuring 6 3/8 by 5 inches. Cut a first panel on deluxe flower shaping paper measuring 6 by 4 3/4 inches and adhere on card base using dimensional tape. Trim the pattern paper from Wild Rose Paper Collection to measure 5 7/8 by 4 1/2 inches and adhere on white panel using clear glue, trim another panel on pink cardstock measuring 5 3/8 by 4 1/8 inches and adhere on card base using clear glue. Trim scenic paper from paper collection measure 5 1/4 by 3 7/8 and adhere on pink panel using clear glue.

Die cut 2 border shapes from Decorative Pocket Accents Die Set and Die Cut smallest eyelet frame from Eyelet Frame Gateway Die Set and Rectangle Frame using smallest eyelet frame and second last rectangle frame from Eyelet Rectangle and Basic Die set on Deluxe Paper.

Stamp sentiment "Happy Father's Day" on the eyelet frame from Thank You Sentiment Cling Set using Mulberry Archival Ink and color the eyelet frame edges, decorative borders and Eyelet rectangle frame with same ink using daubers. Trim the extra part of eyelet frame tag and decorative borders. Apply clear glue on decorative borders and Rectangle Frame using hydra sponge and cover with Nida Tanweer Magic Glitter Powder adhere borders on the last pattern paper panels top and bottom edges and Eyelet Rectangle frame on the front of the card as shown using clear glue. Add tag as shown.

Die cut 2 shapes from Swirly Border Accents Die on Deluxe Paper, apply clear glue and cover with glitter powder.

For the flowers, stamp smallest flowers from Classic Rose Stamp Set on pink cardstock using VersaMark Embossing ink cover with white embossing powder, heat it using heating tool, die cut using coordinating die shape the flowers using shaping kit, apply clear glue and cover with Glitter Powder. Add Novo Drops in centers.

Stamp the smallest butterflies from Large Floral Butterfly Stamp Set using Forget Me Not Ink die cut using coordinating die and color the smallest butterfly with vivid and mulberry ink and dress with Glitter.

Arrange all ready element as shown using hot glue gun and embellish the card using Nuvo Ivory Seashell drops.

Other Products: Die Cutting Machine, White Embossing Powder, Pink Cardstock, Versamark Embossing Ink, Nida Tanweer Magic Glitter Powder, Dimensional Tape, Hot Glue Gun, Nuvo Ivory Seashell drops.

Instructions:

Cut a piece of white cardstock to 9 x 6", score at 4.5" and fold to get a base. Cut a piece of pink paper from the Floral Banners Paper Collection to 4 1/4 x 5 3/4", second one to 3 11/16 x 5 1/4" and a little bigger piece of white cardstock. Cut a piece of mint paper from the Floral Banners Paper Collection to 4 1/8 x 3" and a little bigger piece of white cardstock. Adhere them to the base. Stamp the sentiment in Vibrant Fuchsia ink and Celebrate Love Sentiments Cling Stamp Set and cut it out.

Cut out a white Diamond 1 with the Eylet Diamond Die Set and a mint Diamond 1 from the Floral Banners Paper Collection with the Diamond Basics Die Set, adhere them together. Cut out a white frame with the Diamond 1 from the Eyelet Diamond Die Set and Diamond 2 from the Diamond Basics Die Set. Cut out a white Diamond 3 with the Eyelet Diamond Die Set. Cut out a white and a mint diamond with the Straight Edge Diamond from the Lacy Diamond Die Set. Cut out a white diamond with the Straight Edge Diamond and Small Decorative Diamond from the Lacy Diamond Die Set. Adhere all diamonds together and to the base as pictured.

Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies.

Shape all flowers using their coordinating shaping mold and add some Rock Candy Small Stamens to their centers. Stamp blossoms from Lush Lilac Stamp Set in Sunflower ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Lemon Chiffon Prills.

Stamp 3 branches from Cottage Tree' scapes Cling Stamp Set and 2 leaves from Summer Wreath Accents Cling Stamp Set in Fern Green Ink. Color them with Leaf Green ink and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal , self-adhesive pearls

Instructions:

Cut a piece of white cardstock 9 x 6", score at 4.5" and fold to get a base. Cut a piece of paper from the Floral Banners Paper Collection to 4 1/4 x 5 3/4", second one to 3 11/16 x 5 1/4" and a little bigger piece of white paper. Adhere them to the base. Stamp the sentiment in Vibrant Fuchsia ink and Celebrate Love Sentiments Cling Stamp Set and cut it out.

Cut out two Large Lacy Diamond frames from the Diamond & Lace Die Set, glue them together and to the base. Cut out a white Diamond 3 with the Eylet Diamond Die Set and a mint Diamond 3 from the Floral Banners Paper Collection with the Diamond Basics Die Set. Cut out a white Diamond 1 and mint Diamond 3 from the Diamond & Lace Die Set. Using the same set, cut out white Diamond 1, Diamond 2 and Diamond 3. Cut out a white petite diamond with the Diamond 3 and Diamond 4. Adhere all elements to the base using glue and adhesive tape.

Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies.Shape all flowers using their coordinating shaping mold and add some Rock Candy Small Stamens to their centers.

Stamp blossoms from Lush Lilac Stamp Set in Buttercup ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Lemon Chiffon Prills. Stamp 3 branches from Cottage Tree' scapes Cling Stamp Set and 3 leaves from Summer Wreath Accents Cling Stamp Set in Fern Green Ink. Color them with Leaf Green ink and diecut with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal , self-adhesive pearls

Instructions:

Card measures - 4 1/4 inches by 5 1/2 inches. To create card base - cut out  a 4 1/4” x 11” piece of white card and score it at 5 1/2” (long side up). Fold using a bone folder along the score line. Cut out one 4” x 5 1/4” piece of HCDP1-2134 Moments in Time Paper Collection and adhere it to the card front. Cut out 4 1/4” strip of HCDP1-2134 Moments in Time Paper Collection, tear it and distress the edges with Memento Dye Ink Pads: Rose Bud and Lilac Posies using HCDA1-449 Daubers, then adhere the strips to the card front.

Stamp the sentiment from HCPC-3935 Fancy Special Day Cling Stamp Set on HCPP1-468 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Rose Bud, then die cut it with matching HCD1-7320 Fancy Special Day Die and adhere the final piece to the card front as shown.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Bone folder, White cardstock,

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” champagne Metallic cardstock at 5” on the long side to create the card base. Cut x2 Moments in Time Paper Collection, sheet 11B at 4 7/8 x 6 7/8” and cut x2 sheet 7B at 4 5/8 x 6 5/8” and ink all the edges using Brilliance Pearlescent Purple ink. Adhere the two sets together using dries clear adhesive and adhere to the card front and the inside of the card. Stamp the ‘You are so much more than a friend’ sentiment from the For My Friend Sentiments Cling Stamp set on the inside of the card using Brilliance Pearlescent Purple ink.

Using the third and fourth largest Royal Elegance Frames Dies, cut from champagne metallic cardstock and adhere slightly to the right of the card front using dries clear adhesive.

Stamp the Classic Roses on Deluxe Flower Shaping Paper using Brilliance Pearlescent Orchid ink, diecut using the coordinating dies, color using Pearlescent Purple and Pearlescent Orchid inks and shape using the Groove Golf Tool and the Deluxe Flower Shaping Kit. Use three of the largest flowers and three of the next size flowers to create the large rose. Use two of the third size and three of the fourth size flowers to create the medium roses. Adhere the flowers together using hot glue.

Stamp the Classic Rose and the Leafy Accents leaves on Deluxe Flower Shaping Paper using Pearlescent Ivy ink and diecut using the coordinating dies. Color the leaves using the Pearlescent Ivy ink and shape the leaves using the Deluxe Flower Shaping Kit. Use a paint brush to add dries clear adhesive to the roses and leaves and sprinkle with Rajni Chawla’s Crystal Clear Glitter.

Adhere the roses and leaves to the left side of the diecut frame using hot glue. Use a sponge to randomly add dries clear adhesive to the card front and the inside of the card and sprinkle with Crystal Ultrafine Transparent Glitter to add a little extra sparkle.

Other Products: Diecutting Machine, Champagne Metallic Cardstock, Hot Glue Gun, Brilliance Pearlescent Purple and Ivy Inks, Misti, Paint Brush

Instructions:

Ready side fold card measures 5" × 7". Cut a mat from Climbing Clematis designer paper collection using largest die from Majestic Swirl Frames die. Distress edges with matching ink and adhere it on ready card base. Cut a decorative frame from white cardstock using die from the set. Adhere that on card using dimensional tape. Cut another mat from designer paper measuring 3" × 5" and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card. Cut another decorative piece from white cardstock using die from the set. Stamp sentiment on it using majestic violet ink. Mat it on card using dimensional tape. 

Other Products: White Cardstock, Hot Glue

Instructions:

To make a Slim Line card score a piece of 7 x 8 1/2" white card stock at 3 1/2". Layer a piece of the Moments in Time paper (sheet 5A) on top 1/8" smaller.

Die cut the 3rd die from the Majestic Swirl Frame, cut apart and adhere behind a piece of white card stock 3 x 8". Top that with another piece of the sheet 5A Moments in Time 1/8" smaller. Add foam dots to the back and adhere to the card.

Use the 2nd die from the Simply Elegant Centerpiece set  and die cut from white card stock, cut apart, add a piece at the top and one at the bottom.

Cut a piece of white card stock 2 5/8 x 3 3/4", layer a piece of the Moments in Time on top 1/8" smaller. Add foam dots to the back and adhere to the card.

Stamp 3 of the 3 leaf leaves from the Leafy Accents set on white with the Cottage Ivy ink, color in with the Pistachio, cut out with the coordinating die, ink the edges with the Bamboo Leaves ink, place in the matching mold and run through the die cut machine to shape.

Stamp 2 of the smallest Wild Roses on a piece of the Moments in Time paper with Lilac Posies ink, cut out with the coordinating die, ink the edges with more of the lilac Posies ink, place in the matching mold and run through the die cut machine to shape. Place both the leaves and flowers on the center piece on the card as shown

To finish the card add tiny pearls to the center of each flower and glitter to all the leaves and flowers.

Other Products: Paper trimmer, Die cut machine, Tiny Pearls,

Instructions:

My finished card size is 6" x 6". Using white cardstock, make card base and cover with a piece of 7B of the Moments in Time paper collection.

Using white cardstock, die cut the Elegant Hearts Centerpiece die. I used a die from the Simple Centerpiece die and cut a piece of Sheet 12B to go behind the center die of this piece. Using dies from the Simple Centerpiece die and some of the Luxe Gold Cardstock, I cut two frames to fit the center of this piece. Glue everything down to the base card.

Stamp the Clematis flower petals onto Deluxe Flower Shaping Paper using Sweet Plum ink and color same using Sweet Plum ink and one of the Stack and Store Daubers. Stamp the leaves using Fern Green ink and color with Leaf Green and edge with Olive to darken just a bit. Die cut flowers and leaves using coordinating dies and layer onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. Glue two of the flower petals together using hot glue. Be sure to stagger the petals. I also added a clump of hot glue to the center of the flowers and spooned the Prills over it and allowed the hot glue to dry. Decide on placement on the card and glue down.

Cut a length of white seam binding and spray with water and scrunch up. Swipe the Sweet Plum ink pad onto the desk pad and spritz with water. Swirl the seam binding through the ink to color and allow to dry. Tie a bow and use Scor-Tape and hot glue to glue to the card front. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, Scor-Tape, White Cardstock, Sweet Plum Colored Seam Binding

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10’ x 7”, score at 5” along the long side and fold to create a 5” x 7” base. Cut a piece of silver cardstock 5” x 7” and adhere to the front. Cut a piece of purple pattern paper 4 7/8” x 6 7/8” and adhere to the front. Cut a piece of silver cardstock 4 5/8” x 6 5/8”. Cut a piece of green pattern paper 4 1/2" x 6 1/2" and adhere to the front of the silver cardstock. Die cut the inner using the smaller large tag die from the HCD1-7202 Album Tags and Accents Die. Die cut a frame out of silver cardstock using the inner and outer label die and adhere to the aperture as shown. Die cut 4 small corners out of white cardstock using the corner die from the HCD1-7202 Album Tags and Accents Die and adhere to the corners to the back of the opening. Die cut the long lace edges out of white cardstock using the lace edge die from the HCD1-7202 Album Tags and Accents Die, trim and adhere to the long edges and the bottom edge to the back of the opening. Adhere the frame to the card front using foam tape.

Die cut two eyelet tags using the eyelet tag die from the HCD1-7202 Album Tags and Accents Die – one in white cardstock and one from silver cardstock. Adhere the white tag over the silver tag offsetting them so a hint of silver can show.  Die cut the inner tag using the plain edge tag die from the HCD1-7202 Album Tags and Accents Die and adhere to the front of the card.

Stamp the large lilac spray image from the HCPC3817 Lush Lilac & Umbrella Spray Cling Stamp Set on Iris cardstock using Jet Black ink. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the top of the frame as shown.

Stamp the umbrella image  from the HCPC3817 Lush Lilac & Umbrella Spray Cling Stamp Set on Iris cardstock using Jet Black ink. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Trim and adhere to the bottom left of the card as shown with foam tape and squares.

Stamp the scroll image from the HCPC-3818 Sweet Lilac Scroll & Notes Cling Stamp set in Jet Black ink on Iris cardstock.  Stamp the sentiment from the HCPC-3818 Sweet Lilac Scroll & Notes Cling Stamp set in Jet Black ink on the scroll using a stamp positioner. Colour the image with Zig Clean Colour Real Brush Markers and die cut with the coordinating die.  Adhere to the centre of the card over the smaller tag with foam tape.

Stamp the lilac images from the HCPC-3816 Lush Lilac Cling Stamp Set in Lavender ink on Deluxe Flower Shaping Paper. Colour the centres with Vivid Chartreuse ink and the outer petals with Pretty Petunia ink and die cut with the coordinating die. Colour the edges with Cactus Flower ink and the backs with Pretty Petunia ink and shape using the coordinating mold. Pierce the centres of the flowers. Colour the white bead stamens with Vivid Chartruese ink and insert the stamen into the centres of the flowers and adhere with Dries Clear glue. Add Crystal Ultrafine glitter to the flowers using the glossy gel, trim the wires and adhere flowers over the large lilac flourish at the top, the scroll and the umbrella as shown.

Other Products: Brilliance Lavender ink, Versamagic Pretty Petunia, Iris cardstock, heavy cardboard, glossy gel, foam squares, foam tape, stamp positioner

Instructions:

Cut out the white base of the card and fold it to 6 1/2" x 6 1/2". From the Climbing Clematis paper collection, cut a 6 1/4” x 6 1/4" square and glue to the base. From white paper, cut a 5 1/2" x 5 1/2" square and glue then from the paper collection cut a 5 1/4" x 5 1/4" square and adhere.

From the paper collection, cut the largest frame from the Rounded Window Frame Die set and glue it as shown.

Stamp Vinning Clematis Banner and Clematis flowers and leaves and the sentiment from the Just For You Sentiments set with Versamark ink onto white paper and emboss with golden powder. Die cut with the coordinating die. Color all the elements with watercolor markers, then shape flowers and leaves with a matching mold.

Glue everything as shown. Add green Nuvo drops to the center of the flowers and wait for them to dry.

Other Products: Cuting machine, watercolor markers

Instructions:

From a sheet of white HCPP1-475 Deluxe Flower Shaping Paper Pack of 50, cut out a rectangle measuring 6.25" x 9.75", fold it in half to form the base. From the green sheet of the Snowy Pine Paper collection, cut a 6" x 4.75" rectangle and glue it to the base.

On a white cardstock, stamp the image of the cones from the HCPC-3917 Festive Pine Cones set and selected fragments of twigs around it. Apply them in layers, covering the previous element with your shape cut in clear 8.5 x 11 GBKK811B1 Clear Cardstock paper. Use Pistachio Green, Bamboo Leaves and Rusty Hinge Distress Ink Brown. Paint with watercolor paints in shades of green and brown.

Then cut the image with the larger rectangle (4 '' x 5.25 '') and the smaller rectangles from the HCD2-7189 Eyelet Rectangle & Basics Die set, placing them on the image as shown. Place them in layers, interleaving with recycled cardboard.
Splash it with white chalk paint. Cut snowflakes from the HCD2-7363 Holiday Snowflake Frame Die Set and the HCD1-7375 Seasonal Wreath Die Set and glue them in the selected places as shown. Place silver crystals on the stars. And it's ready!

Other Products: Cutting machine, trimmer, watercolor paints, brush, white chalk paint, silver-colored crystals, recycled cardboard, Rusty Hinge Distress Ink

Instructions:

Cut out the white base of the card and fold it to 6 1/2" x 6 1/2". From the Seasonal Wreath paper collection, cut a 6 1/4” x 6 1/4" square and glue to the base. From white paper, cut a 4 3/4" x 4 3/4" square and glue, then from the paper collection cut a 4 1/2" x 4 1/2" square and Adhere. Add a ribbon.

From the white paper, cut the the smaller frame from the Rounded Window Frame Die set and glue it in the center.

Stamp the sentiment with black ink on white paper, cut it with scissors and glue it as pictured.

Stamp the leaves from the Summer Wreath Accents Cling Stamp Set with Versamark ink onto white paper and emboss with golden powder. Die cut with the coordinating die. Color all the elements with watercolor markers.

Glue everything as shown.

Other Products: Ribbon, cutting machine