Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold card 5” x 7” and adhere to the front of the card. Cut a piece of light blue/green pattern paper 4 7/8 x 6 7/8” and adhere to the front of the card. Die cut the decorative frame out of gold cardstock using the No. 1 die from the HCD2-7426 Oval Filigree Frame Die. Die cut two ovals using the No. 2 die from the HCD2-7426 Oval Filigree Frame Die out of heavy cardstock. Adhere the two ovals together and adhere behind the oval frame and then add to the front of the card. Die cut an oval out of blue pattern paper using the oval die from the HCD2-7426 Oval Filigree Frame Die and adhere to the front of the decorative frame.

Stamp the urn image from the HCPC-3931 Large Floral Urn Cling Stamp Set with Jet Black ink on Iris cardstock. Colour the image with Zig Clean Colour Real Brush Markers and die cut with the coordinating die.  Adhere to the front of the card with foam tape for dimension.

Stamp the floral images from the HCPC-3933 Floral Shoppe Fillers, HCPC-3985 Dragonfly Florals, HCPC-3965 Summer Wreath Accents Cling Stamp Set and HCPC-3932 Floral Shoppe Accents Cling Stamp Set with Jet Black ink in Iris cardstock. Colour the images with Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Trim and adhere to the top of the urn as shown. Add Heart of Gold Prills to the yellow flowers and Blue Suede Shoes Prills to the blue flowers. Adhere to the front of the urn as shown. Add Crystal Clear to the peacock feather inners with Dries Clear glue and Crystal Ultrafine glitter to the flowers, leaves and feathers with Dries Clear glue. Add Heart of Gold Prills to the centres of the pink flowers.

Stamp the posy border image from the HCPC-31015 Peacock & Posies Cling Stamp Set on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Adhere to the bottom of the urn with foam tape. Add Heart of Gold Prils to the centres of the flowers, Crystal Clear glitter to the centres of the feathers and Crystal Ultrafine glitter to the leaves and feathers with Dries Clear glue.

Stamp the sentiment from the HCPC-3845 Just For You Sentiments Cling Stamp set on light green pattern paper using Jet Black ink. Die cut the sentiment using the oval tag die from the HCD1-7201 Ticket and Tags die and adhere under flowers at the top of the urn as shown with foam squares.

Inside Card: Cut a piece of gold cardstock 4 15/16” x 7” and adhere to the inside back of card.  Cut a piece of pattern paper 4 13/16” x 6 7/8” and adhere to the front of the gold cardstock. Die cut the decorative frame using the No. 3 die from the HCD2-7426 Oval Filigree Frame Die set out of Deluxe Flower Shaping Paper. Stamp the sentiment from the HCPC-3845 Just For You Sentiments Cling Stamp set in Jet Black ink using a stamp positioner. Adhere to the inside back of card as shown.

Other Products: Iris cardstock, foam tape, foam squares, heavy cardstock, stamp positioner

Instructions:

Cut Deluxe Flower Shaping paper to 7 1/2 x 4 1/2" size, score and fold at 7". Cut another piece of the cardstock to 7 x 4 1/2" and attach to the inside of the 1/2" fold to create card base. Using from the HCD1-7452 Ornate Window Die, cut the solid window opening from the front center of card as shown. Stamp the small peacock from HCPC-31015 Peacock & Posies Cling Stamp Set in Cactus Flower ink onto scrap paper, then onto bottom right of card. Repeat this step for the top left corner of card. 

Stamp the ornate window from HCPC-31016 Ornate Window Cling Stamp Set in Garden Patina ink and then Manganese Blue on some areas of stamp and onto Flower Shaping paper. Stamp this image a total of 6 times. Clean the stamp. Stamp the window 2x with white pigment ink onto patterned paper (sheet 5B) from the Ornate Peacock paper collection and heat emboss with white embossing powder. Use the coordinating die to diecut the windows. You’ll need 4 of the outer blue stamped window frame and 2 of the ornate window header. You’ll need the window frame only of the patterned blue ones. Diecut 2 of the solid window opening from top right panel of sheet 9A from the paper collection. 

Stamp the small peacock from HCPC-31015 Peacock & Posies Cling Stamp Set in Garden Patina ink and then Cactus Flower onto some areas of stamp and onto Flower Shaping paper. Stamp the large peacock from HCPC-31014 Ornate Peacock Cling Stamp Set in the same ink onto the paper. Clean the peacock stamp. Stamp the peacock and posy spray from HCPC-31015 Peacock & Posies Cling Stamp Set onto vellum in white pigment ink and heat emboss with white embossing powder. Use coordinating dies to diecut the images.

Sponge the edges of card with Cactus Flower ink and then go over the same with Pink Peony. Lightly sponge the Garden Patina around the bottom right of card in the area that will surround the window. Add a touch of the Vivid Chartreuse next to it as well. Repeat this for the top left of card. Randomly sponge 2 of the blue window frames and header with white pigment ink and heat emboss with white embossing powder. For dimension, layer 1 of the blue embossed frames on top of the other blue non-embossed one. Repeat this with the other 2 blue frames. Sponge the edges of window frames with Garden Patina ink and same for the top of header. Add a touch of the Vivid Chartreuse in the body of window header and frame. For the patterned blue window, sponge the edges with Garden Patina ink. Sponge the peacocks, using the Garden Patina on body with touch of Vivid Chartreuse and Sunflower ink for the beak. Use Cactus Flower and Sunflower on the florals as well and Garden Patina and Vivid Chartreuse. Use the same colors for the vellum florals.

Attach the window headers at the top of each window frame. Layer the 2 blue window frames on top of each other as shown with the ornate headers pointing in opposite directions. Cut apart the patterned blue window frames at an angle, then layer underneath the blue dimensional window frame so that it’s slightly offset. Dab some of the Dries Clear glue onto a yellow sponge and onto top left and bottom right of card, then sprinkle with Rajni Chawla’s Crystal Clear glitter and tap off. Attach the window frame in place on the card. Attach the solid blue window on the inside of card. Stamp the ‘For my Friend’ sentiment onto the solid window on inside of card. Trim off some end sections of both the peacocks to make them smaller. Shape the peacock and florals using the shaping stylus from the Deluxe Flower shaping kit. Attach these onto card as shown. 

Other Products: Hot Glue, Hot Glue Gun, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Card size is 4 1/4 x 7 5/8”. Cut Deluxe Flower Shaping paper to 8 1/2 x 7 5/8”. Score and fold at 4 1/4”. Cut Aqua paper from Ornate Peacock Paper collection slightly smaller, use floral accent from the HCPC-31014 Ornate Peacock stamp set, to stamp background using a combination of Leaf Green and Paradise Teal ink. Use Stack and store dauber to ink the edges of panel, then emboss with Bridal Embossing powder. Heat set. Adhere onto card base using Dries Clear glue.

Create an oval frame and background by manipulating the diecuts as shown here, however, it can be done by splicing pieces together as well. To do this cut Deluxe Flower Shaping paper to 7 3/4 x 4”. Use white ink to stamp window so the top peak is at the edge of the paper and making sure the bottom of window isn’t inked as we want to extend this to create a longer oval. Emboss with gold embossing powder and heat set. Clean your stamp, this time only applying ink on the upper decorative section of window and stamp on the opposite side, again making sure the peak is at the edge of the paper. Embossing with Gold Embossing Powder, heat set. Then diecut using window frame outline die, only place the die you wish to cut in the cutting plates, this means the blade at the bottom of the window should not be inside the cutting plates, then diecut. Repeat this on the opposite side, this time you’ll only want to place the decorative peak inside the cutting plates. Next place the inner window frame die and diecut one side, making sure the bottom blade of window isn’t inside the cutting plates. Repeat on other side. You should now have a beautiful oval frame. 

Stamp window on Luxe Gold cardstock using white ink and Bridal embossing powder, heat set, then diecut using ornate arch die. Adhere onto sides using foam adhesive. Cut the background similarly only using the window frame outline die, using green paper from paper collection cut to 7 3/4 x 4”. Stamp sentiment using a combination of Leaf Green ink and Paradise Teal ink. Adhere onto card base using Dries Clear glue, then adhere frame using foam adhesive.

Stamp both peacocks using a combination of Leaf Green, Paradise Teal and Vibrant Fuchsia inks. Diecut with coordinating dies. Color images using Stack and Store Daubers along with Garden Patina, Leaf Green and Vibrant Fuchsia inks. Use Hydra Sponge to apply Crystal Lacquer onto peacocks for a soft shine. Stamp floral arch from HCPC-31015 Peacock and Posies stamp set onto pink paper from paper collection using white ink and Bridal Embossing Powder. Heat set. 

Use Deluxe Flower Shaping Kit to shape images then scissors to trim apart feathers and adhere onto card base as shown using assorted foam adhesives. Finish with Baby’s Breath glitter if desired.

Other Products: Foam Adhesive, Diecutting Machine, Scissors

Instructions:

Card size:  5” x 7”. Make a shaped card (see video) using the outer die of the Elegant Swirl Gateway on folded white cardstock. Cut another white front then glue it to card base matching all cut edges (note: it will not match fold but extend over). Cut a card front from blue color decorative paper, glue it to the card front matching all edges.

Use the next die in on the Elegant Swirl Gateway to cut the decorative part of this set from white cardstock. Glue it to the card front.

Stamp Ornate Window, Pea hen, and curved posey piece using black onto white, die cut, color. This sample uses white Painty Pen on the baby’s breath flowers and white on the peacock. Cut one of the cottages from the Countryside Cottages Paper Collection using the open window die from the Ornate Window. Pop window frame with 6 panes cut out over the cottage images, glue to card.

Pop up curved posy swag onto top of window and pop up the Pea hen to bottom of window.
Stamp leaves using Bamboo Leaves, sponge with New Sprout and Magenta Hue, die cut, then form in the Leafy Accents Mold. Brush lacquer onto leaves.

Stamp Sunflowers using Vibrant Fuchsia, sponge with Magenta Hue, die cut then form in the 3D Rustic Sunflower mold.  Glue 2 flowers together then add yellow Prills to the centers. Glitter flowers.

Arrange leaves and flowers around pea hen and also glue 1 to the top of the window over flower image in the center.

Glitter flower images and card base if desired.

Other Products: White cardstock, white Painty Pen, Copic Markers: RV52, RV55, RV19, BG11, BG32, BG34, Y15, Y19, Y38, YG03, YG23, YG17, C2, C3, C5

Instructions:

Ready easel fold card measures 6" × 8". Take a piece of white cardstock measuring 8" × 12". Score on 3" and 6" from longer side. Fold scored lines and create an easel card. Cut a mat from designer paper measuring 5 7/8" × 7 7/8" and 2 mats measuring 2 7/8" × 7 7/8". Distress edges with matching ink and adhere on card base. Choose another designer paper and cut a mat measuing 5 5/8" × 7 5/8" and 2 mats measuring 2 5/8" × 7 5/8". Distress edges with matching ink, score lines on all 3 mats to create texture. Adhere mats on white cardstock which is 1/8 of inch bigger than the designer paper mats. Adhere them on card.

Cut 2 decorative pieces from white cardstock and 2 from luxe gold cardstock using die from Filigree Accents Die set. Cut oval pieces from designer paper, gold cardstock and white cardstock using oval dies. Stamp sentiment on white oval diecut using teal zeal memento ink. Arrange all diecuts on card as pictured. Stamp peacock image on neenah solar white cardstock using black memento ink and paint with copic markers. Cut images with coordinating dies and arrange them on card using foam dots as pictured.

Stamp Clematis flower on deluxe flower shaping paper using magenta hue ink and cut with coordinating die. Paint flowers using same ink and shape using deluxe flower shaping kit. Stamp small flowers from Sweet pea using leaf green ink and cut with coordinating die.  Paint using same ink and shape using stylus. Pierce the center of flowers and add stamens. Stamp leaves from Classic Rose, Holly Berry Spray and Wild Aster Spray using leaf green ink and paint using same ink. Shape classic rose leaves using shaping mold. Diecut white cardstock using die from Slim Ornate Rectangle die set. Glue it on card using dimensional tape and arrange flowers and leaves using hot glue.

For finished look apply Crystal Clear on flowers and leaves using Art Glitter Dries Clear  glue.

Other Products: Smooth White Cardstock, Dimensional Tape, Copic Markers' Sea Grass Archival.

Instructions:

Score a 9" x 8" piece of deluxe flower shaping paper at 4" and fold at the score line to create a 9" x 4" card base. Die cut 4 pieces of pattern paper from Ornate Peacock Paper Collection using the dies from Slim Elegant Rectangle Die. Use the die from same die set to die cut a piece of white cardstock. Stamp the sentiment from Celebrate Love Sentiments Cling Stamp set on the smallest die cut using Jet Black Archival ink. Adhere all the die cuts on the card base as shown.

Use Brustro Metallic watercolours to add shine to some parts of the peacock. Add a few rhinestones to the die cut to add finishing touch.

Other Products: Brustro metallic watercolours and rhinestones

Instructions:

The patterned paprer with the ornate border is the background for this 12 x 12"layout. Tear a large piece of the light blue patterned paper and adhere to the right hand side of the layout. Tear a slightly smaller piece of teal patterned paper and adhere on top of the last. Cut a strip of the dark teal patterned paper that is 0.75x12. Adhere to the right hand side of the layout.

Die cut out the large decorative Rectangle Filigree Frame die from white cardstock. Cut the middle section of the die from dark teal patterned paper, adhere these layers together. Adhere to the left hand side of the layout. Mat the photo in white cardstock and adhere to the right hand side of the layout using foam tape. Die cut out the large tag using the coordinating die. Adhere to the left hand side of the matted photo. Add baker's twine to the tag. 

Stamp and die cut both peacock images, and 2 of the small scrolls using an embossing pad and white embossing powder onto seafoam cardstock. Adhere the peacocks around the matted photo using foam squares. Add the small scrolls to the right and up above the matted photo.

Add pearls to all of the flowers on the stamped images. 

Other Products: Cardstock (White, Seafoam), Embossing Pad, White Embossing Powder, Pearls, Baker's Twine, Scrapbook Adhesives by 3L (3D Foam Squares, Crafty Foam Tape, E-Z Runner Ultra, Dual Tip Glue Pen)

Instructions:

It's a ready folded card measuring 9" by 6". Cut panel on green sheet 8B from Ornate Peacock Paper collection measuring 8 3/4 by 5 3/4" and adhere it on the card base using clear glue.

Trim Deluxe Gold Card panel measuring 7 1/4 by 5 1/2", die cut bottom edge using 2 borders from Curvy Accent Border Die Set, adhere on the card base using dimensional tape. Trim the panel from designer paper sheet number 1B and die cut the edge using border line die from the same Curvy border collection and adhere this panel on the golden edge panel using clear glue.

Die cut the circle frame using eyelet circle from Decorative Circle frames dies and Eyelet Circles Basics small die set on the Gold card. Trim the circle pattern form sheet number 1A using circle die and under the golden circle frame using clear glue, add this circle window on the card using dimensional tape.

Stamp the large image of Ornate Peacock and the posies images on the vellum using versamark embossing ink cover the images with snowflake tinsle embossing powder and heat it using heating tool. Die cut the images using coordinating dies, color the images from the back side using salvage patina, leaf green and kitsch flamingo inks using daubers.

For the flowers, stamp the Zinnia flower images from Small and large Garden Zinnia Cling Stamp Set using versamark Embossing ink on mint card, cover the images with white embossing powder, heat it using heating tool. Die cut the images using coordinating dies, color the centers of zinnias with Salvage patina ink using daubers, use shaping stylus and Golf Goove shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers add decorative beads using hot glue, add clear glue and spinkle pink mini prills. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Stamp the sentiment on the green paper using versamark ink and heat emboss with gold tinsel embossing powder and trim the sentiment with Slim Eyelet smallest die.

Arrange all ready elements as shown using hot glue and decorate the card and peacock with rhinestones and decorative beads.

Other Products: Vellum Card, Mint Cardstock, Hot Glue Gun, Nida Tanweer Magic Glitter Powder, Dimensional Tape, Decorative Beads, Rhinestones, Versamark embossing Ink, Salvage Patina Ink, Kitsch Flamingo Ink, Snowflake Tinsel Embossing Powder, Golden Tinsel Embossing Powder.

Instructions:

Create 5 x 7” card base using white paper and largest Fancy Classic Oval Frame Die. To create top base, cut piece from designed paper collection using same die and place on the base of card. Die cut an outer frame from gold paper and paper collection using the decorative die from the same set and adhere to the card base using 3D foam tape for dimension.

Stamp on the white paper Peacock & Posies Cling Stamp Set using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Colour with pencils. Place onto the card using adhesive foam strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flowers. Add a little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, stamp the Clematis Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut the sentiment ticket from the paper collection, place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Make a  card base using white cardstock. Cut two pieces of white cardstock 7" x 5" and 7 1/2" x 5"   and score at the 1/2" mark on the longer piece. Fold and adhere the flap on the smaller piece. Cut deep pink card stocka  little smaller than the card front and adhere to the base. Cut luxe gold paper a little smaller than the gold mat layer and attached to the card base. Add another piece of mat layer on the card front.

Cut a piece of gold and white die cut using the inner dies from the Slim Ornate Rectangle die. Adhere the pieces offsetting a little. 

Cut a border design from the pattern paper and trim the die cuts to add as border. Adhere the whole piece on the card front. Cut a gold scalloped circle frame using the outer most scalloped die from the Circle die set. Add a circle pattern Paper at the back. Cut another piece using gold card stock and add a peacock image cut from the smaller circle die.

Stamp the images from the Ornate Peacock stamp set, color with Zig markers and die cut with the coordinating die.

Stamp the sunflower images on flower making card stock using cactus flower ink. Colour using the Magenta hue and cactus flower ink and  shade the centre part with sunflower ink. Cut using the matching die. Shape the flowers in the 3D flower shaping mold for sunflower. Adhere two flowers together. Mix the two prills together and add to the centre part of the flower using clear glue. Make filler flowers using the smallest stamp from the Rustic Sunflower stamp set with leaf green ink. Shape using ball tool from the flower making kit.  Add prills in the centre.

Make leaves using the small leaves stamp from Hollyhocks Petals and Leaves stamp set on flower shaping paper with leaf green ink. Colour  the leaves using Leaf green and Sunflower ink. Cut with matching die and shape in the 3D mold for Hollyhocks.

Arrange the ornate peacock die cuts and the flowers and leaves on the card front using hot glue. Stamp the sentiment on a small circle and attach to the card front to finish the card.

Other Products: Die cutting machine, scoring board, Hot glue gun and sticks

Instructions:

Create a top fold card measuring  7 1/2” x 5 1/2”.  Choose a designer paper from Ornate Peacock Paper Collection and cut it to the size 7 1/4” x 5 1/4”. Adhere it on white card base. Choose another designer paper from the same Paper Collection and cut it to the size 7” x  5”. Die cut this paper using the die from Filigree Accents Die. Now, mat this paper on Luxe Gold Card stock and then white cardstock making a delicate border of 1/16” on all four sides. Adhere this panel on ready card base using foam tape.

Stamp the image from Large Floral Urn Stamp Set on a white card stock using VersaMark and heat emboss it using golden embossing powder and cut out with coordinating die. Cut it into half and adhere it on the card base using foam tape.

Choose and stamp the images from Ornate Peacock Cling Stamp Set and Peacock & Posies Cling Stamp Set on a smooth watercolour paper using Night Sky Archival ink. Paint all the images using Zig Clean Clear Brush Markers. Cut all the images using their coordinating dies. Also add Minnie Pearls prills to images.

For Clematis Flower, Stamp Clematis flowers using Leaf Green Archival ink on Flower shaping paper and cut them using their coordinating dies. Color the flowers using the same ink and shape them using coordinating shaping mold. Now add Go Green prills to the centre of flowers.

Once all the elements are ready assemble the card as shown. Add a stamped sentiment from Thank You Sentiments Cling Stamp Set. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors.

Instructions:

Cut a piece of white cardstock to 9” x 7” and score in half at 4 1/2”. With HCD1-7298 Decorative Cage, die cut through both layers of the folded card base making sure to let the left side of the die to fall over the edge of the card to preserve the fold. This will create the shaped card base. Next using the same die, cut a piece from sheet 6B for the front of the card and 6A for the inside, from the HCPD1-2148 Ornate Peacock Paper Collection. Adhere these two pieces in place. (Inside piece will need to be trimmed slightly to fit) Now using the second largest die from the Decorative Cage Die, cut one in white cardstock and one in Luxe Silver Cardstock. Layer these with the white on top and slightly off set them so that the silver peeks out from behind. Glue these to the card front. 

Stamp the HCPC-31014 Ornate Peacock Cling Stamp onto white cardstock with Versa Mark Ink. Sprinkle with Purple Shadow embossing powder and heat emboss with a heat tool. Color using HCDA2-450 Stack and Store Daubers with Sunflower, Magenta Hue, Paradise Teal, and Bluebird. Stamp leaves from HCPC-3912 Cascading Wisteria Cling Stamp Set 2x with English Ivy Archival Ink. Color lightly in Leaf Green and English Ivy. Die cut with coordinating dies and ink the edges with English Ivy. Shape using the Deluxe Flower Shaping Kit. Now stamp the flowers from HCPC-3976 Curvy Floral Frame Cling Stamp Set in Manganese Blue Archival Ink and color using Manganese Blue and Magenta Hue. Die cut with coordinating dies and ink the edges with Manganese Blue ink. Shape with the Deluxe Flower Shaping Kit then finish off by adding Bright Pearl Stamens Small and Crystal Clear Glitter. Last but not least stamp a sentiment from the HCPC-3847 Celebrate Love Sentiments Clings Stamp Set with Majestic Violet Ink onto a piece of coordinating scrap paper. Die cut using the HCD1-7202 Album Tags & Accents Dies. Ink the edges using Bluebird Archival Ink. 

To finish the card simply arrange the peacock along with the vines and sentiment and attach using glue and 3D adhesive. Add flowers using a glue gun. Then for a finishing accent, add little silver gems for added details to the bird cage itself. 

Other Products: Versa Mark Ink, Blue Shadow Embossing Powder, Heat gun, Glue Sticks, Glue Gun, Scissors, Paper Trimmer, Die Cut Machine, Bluebird Archival Ink

Instructions:

The finished card measures 5 x 8 inches. Cut a piece of deluxe flower shaping paper 10  x 8 inches and score at 5 inches to make a side fold card.  Cut different pieces of paper as follows and glue it on the card base: 4 3/4 x 7 3/4 inches in blue paper #5B from Ornate Peacock Collection, 4 1/2 x 7 1/2 inches in gold cardstock; 4 1/4 x 7 1/4 inches in pattern paper #5B from Ornate Peacock Collection.

On a white Deluxe shaping paper stamp windows with versamark ink and emboss it with gold embossing powder. Color with zig markers. With a die from the same kit, cut the background of your window in a pattern paper #1B. Glue it under your window. Apply 3D crystal lacquer on the window to give a crystal look. When dry, glue on the card base with 3D foam. 

On a white Deluxe shaping paper stamp peacock with versamark ink and emboss it with blue embossing powder. Stamp a second peacock with magenta hue ink. Cut both with the coordinating die. Color with zig markers. With your scissors, cut the flowers from the second peacock and glue it on the first one to give dimension. Do the same thing with the flourish included in the collection, stamp once in leaf green and once in magenta hue. Cut both with the coordinating die. Color with zig markers. With your scissors, cut the flowers from the second flourish and glue it on the first one to give dimension.

Add cheesecloth and sewing thread on your card and glue your peacock on it with 3D foam dots . Add Nuvo dandelion in the center of you flowers and on your peacock to give dimension.

From ELegant rose sentiments, stamp and emboss your sentiment in blue and die cut. Cut a second one in golden cardstock and paste it under the blue one. Glue on your card under the window.

Other Products: Die cutting machine cut'n boss, scissors, water mister, hot glue gun, cheesecloth, sewing thread, blue emboss powder, versa color ink,

Instructions:

Create a 4.25 x 9.75 inch card base in white cardstock. Cut out the Slim Eyelet Rectangle Die in white card stock and adhere, cut out the Slim Basic Rectangle Die in blue paper from the Ornate Peacock Paper Collection and adhere to card front. 

Stamp the peacock from the Ornate Peacock Cling Stamp Set and the window x4 from the Ornate Window Cling Stamp Set in Jet Black. Sponge the window frame of one window with Rich Cocoa and Paradise Teal and the inner window and top flourish of the other window, cut out with coordinating dies. Cut out additional window pieces in white cardstock and adhere for further dimension, cut off bottom sill. Create a second window and cut off bottom half and adhere with top window to create one long window, as shown, adhere to the center of the card.

Sponge peacock with Paradise Teal, Vibrant Fuchsia and Vivid Chartreuse, cut out with coordinating dies and add glitter.

Stamp the clematis from the Clematis Cling Stamp Set in Vibrant Fuchsia, sponge with Vibrant Fuchsia and Vivid Chartreuse, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold, add stamen and glitter. Stamp the small clematis from the Clematis Cling Stamp Set in Vivid Chartreuse, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold, add stamen and glitter.  

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies, sculpt with 3D Leafy Accents Shaping Mold.

Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Simple Centerpiece Die and distress with Paradise Teal.

Adhere flowers, foliage, peacock and sentiment as pictured.  

Other Products: White cardstock

Instructions:

Cut a piece of white cardstock to 7 x 11.5", score at 1 10/16" – 3 1/4" – 8 1/4"– 9 14/16"  and fold to get a base. Cut 8 pieces of paper from Ornate Peacock Paper Collection to 1 10/16 x 6 13/16" and one piece to 4 13/16 x 6 13/16". Adhere them to the base as pictured Cut a piece of paper from Ornate Peacock Paper Collection to 4 7/16 x 6 7/16"and little bigger piece of the white cardstock, adhere them together. Take them and cut out a window with a die No. 2 from the Ornate Window Die, adhere it to the base using adhesive strips. Stamp a window with the Ornate Window Cling Stamp Set in Toffee Crunch ink, repeat it 3 times, color them slightly. Cut out 2 windows and a decor with dies from the Ornate Window Die as pictured and adhere them. Cut out 2 white and 2 gold borders with dies from the Filigree Border & Accents Die and 2 white and 2 gold decors with dies from the Filigree Accents Die set. Adhere all elements to the base. Cut out a white and a gold sentiment with the die from the Slim Eyelet Heart Rectangle Die, adhere them inside of the card. 

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower and Sunflower inks onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower and Magenta Hue inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 6 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 6 posies from the Peacock & Posies Cling Stamp Set and Ornate Peacock Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp the peacock from the Peacock & Posies Cling Stamp Set, color it and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

To make this 5 1/2" x 4" tent fold Ornate Window card, take the outside edge of the Ornate Window from the Ornate Window Die Set, place onto Deluxe Flower Shaping Paper, tape slightly off the edge of the top of the card and run through a die cutting machine. Die cut another Ornate Window outside edge in Flower Shaping Paper to glue to the back of the finished card.

Take the Ornate Window Stamp from the Ornate Window Cling Stamp Set, stamp twice onto blue paper from the Ornate Peacocks Paper Collection with Distress ink in Peacock Feathers. Lightly color the edges and hinges with the same ink using a Dauber. Die cut with the matching die. Adhere to card front with foam tape.

Die cut the centre window piece and top frame piece from the second Ornate Window Die-cut. Die cut the window inside edge in Luxe Silver Card stock.  Adhere the window frame to the silver card. Adhere to card front using foam tape. Adhere frame piece with foam pads to the window.

Stamp the large peacock from the Ornate Peacock Cling Stamp Set in Peacock Feathers ink, color with the same ink using a Dauber. Color the flowers on the Peacock in Distress ink - Picked Raspberry using a Dauber. Color the beak with light yellow ink. Die cut with the matching die. Adhere to window with foam tape. Stamp the Posies from the Peacock and Posies Cling Stamp Set in Distress ink in Picked Raspberry ink, color with the same ink using a Dauber. Die cut with the matching die. Cut off the flower section and adhere to body of the Peacock with Designer Dries Clear Adhesive.

To make the Lilies, Stamp two sets of Lilies from the Garden Lily Cling Stamp Set, in Peacock Feathers ink, color with the same ink using a Dauber. Die cut with the matching die. Place in the Lily Shaping Mold, lightly mist with water and run through a die cutting machine. Tap out, pierce a hole in the centres with the piercing tool from the Deluxe Flower Shaping Kit and thread white Beaded Stamens through. Off set the petals as you go and adhere with Designer Dries Clear Adhesive. 

Stamp three small Zinnias from the Large Garden Zinnia Cling Stamp Set, in Picked Raspberry ink. Color using a Dauber. Die cut with the matching Die. Lightly shape with the stylus from the Deluxe Flower Shaping Kit. Pierce a hole in the center, thread a white Beaded Stamen and adhere with Dries Clear Adhesive. Adhere Lilies and Zinnias to the card front with hot glue. 

Adhere a few small white pearls to the Peacock flowers. Sponge Dries Clear Adhesive onto Peacock and flowers, add clear glitter. Stamp a Sentiment from the Cheerful Note Sentiment Cling Stamp Set in Ranger Archival Jet Black ink, onto Flower Shaping Paper, die cut with a tag from the Ticket & Tags Die Set. Adhere to side of card. Glue the plain die cut Ornate Window to the back of the card. All done. 

Other Products: Low tack tape, Distress ink - Peacock Feathers, foam tape, foam pads, Distress ink - Picked Raspberry, light yellow ink, water spray bottle, die cutting machine, hot glue, small white pearls, clear glitter.

Instructions:

Fold an 8.75” x 8” piece of white card in half and place the large plain eyelet die over the fold. Die cut to create a tent fold card base.

Die cut the large plain die using white card and layer a patterned paper die cut on top, die cut the slim line eyelet heart die and adhere onto the paper. Adhere to the card base.

Stamp the sentiment in black ink onto paper from the collection, cover with clear embossing powder, remove excess and heat to set. Die cut using the smallest rectangle, edge with teal zeal ink and adhere onto a white card die cut of the smallest eyelet rectangle. Add to the centre of the card base using foam pads.

Make the peacock:- Stamp onto the pale blue paper from the collection using teal zeal ink and die cut. Colour using teal zeal and copics- Y35, RV42, RV25 & YR16. Adhere to a white card die cut of the peacock add a little shading with the teal zeal ink, and shape using the flower shaping tools. Sponge some dries clear adhesive onto the peacock and sprinkle with transparent glitter. Dot dries white adhesive to the fluffy element of the die cut and sprinkle over with crystal clear.

Stamp the large posie onto the blue paper with teal zeal and colour/finish in the same way as the peacock.

Make the flowers: Stamp the small and medium sunflowers using Lilac posies ink onto flower shaping paper. Colour using the same ink and increasing the colour towards the centre. Add rhubarb stalk to the centre of the flower. Die cut and shape using the flower shaping tools. Place a dot of hot glue in the centre of each set of petals and cover with heart of gold prills, allow to cool and remove excess. Secure to the peacock tail using a small amount of hot glue.

Adhere the peacock and florals to the either side of the sentiment and secure with hot glue. Add dandelion crystal drops to the flat coloured flowers.

Other Products: White card, foam pads, hot glue, copic RV42, RV25,YR16, Y35

Instructions:

My card's finished size is 6" x 6".  I made the card base using Deluxe Flower Shaping Paper because it is such a great weight for making cards. I picked one of the card bases on Sheet 1A of the paper collection and coverd the base. I used one of the squares of the Cut Mat Create dies to cut a piece of Sheet 1B of the paper collection to cover up the center of the card front.  

Stamp the window with Night Sky ink onto watercolor paper. Cut out with coordinating die. Also cut just the window topper which has also been stamped with Night Sky ink. Emboss with clear embossing powder. I used night sky to color some of the window just to add a bit of color to the white edges. Glitter the topper using #85 Crystal Glitter and set aside to dry.

Stamp the peacock and the flower topper with gold ink and emboss using clear embossing powder. Using a water brush and Peacock Feathers Distress ink, color the peacock. Cut out with coordinating die. Using a pink Zig marker color the flowers and cut out with coordinating die. Add Heart of Gold Prills to the flowers. Set aside to dry. Use #85 Crystal Glitter to add sparkle to the flower topper and the peacock. Set aside to dry.

Cut a center for the window using clear cardstock and glue to the back of the window. When dry, add dimensional strips to the back of the window and pour in chunky glitter, Minnie Pearl Prills and blue sequins and glue to the card front making it a shaker card.

Glue the window topper to the window then add the peacock and floral topper with dimensional tape.  

Using Night Sky ink, stamp the sentiment onto one of the tags in the paper collection and cut out with coordinating die. Add glitter to tag and allow the glue to dry. Using dimensional tape adhere the tag to the card front.  The card is ready to go.

Other Products: Die Cut Machine, Clear Embossing Powder, Canson Watercolor Paper, Blue sequins, Chunky Glass Glitter, Dimensional Tape, Peacock Feathers Distress Ink

Instructions:

Prepare a 6 x 8 white card stock. Adhere a piece of the ornate Peacock paper slightly smaller on top and set aside.

Stamp the largest stamp from the Ornate Window set on white with the Vibrant Fuchsia ink, color in with the Pearlescent Orchid ink and cut out with the coordinating die. Adhere to the center of the card. Stamp the second stamp from the set on white with the same ink and color again with the Orchid ink. Cut out wit the coordinating die, cut 3 more from white and build together making chip board.  Die cut a piece of the yellow Ornate Peacock paper, ink the right hand edge of each window pane with the Sunflower ink. Adhere to the center of the first die cut. Add the window pane on top.

Stamp the Peacock and swag from the 31015 Peacock and Posies set on white with black ink, color with Zig markers. Cut out with the coordinating die, cut 4 more out of white card stock and layer together making a chip board. Add to the Peacock to the lower part of the card and the swag over the window.

Stamp the Clematis on white with Vibrant Fuchsia and color with the Pearlescent Orchid ink. Cut out with the coordinating die, place in the matching mold to shape. Stamp the leaves on white with the Emerald Green ink, color in with the New Sprout, ink the edges with more of the Emerald Green ink, place in the mold. Run through the die cut machine to shape. Put 2 flowers together with the Stamens making one flower and adhere to the card. Stamp the flowers from the Curvy Floral Rectangle set on white with the Sunflower ink, cut out with the matching die. Shape with the Flower Shaping Tool kit. Add to the card.

To finish, add glitter to the flowers and leaves, medium white pearls to the yellow flowers and tiny pearls to the flowers on the Peacock.

Other Products: Paper trimmer, Die cut machine, White Pearls, Pearlescent Orchid ink,

Instructions:

Card base is 3 7/8 x 5 5/8”. Finished card with the peacock is 5 1/4 x 5 7/8”. Cut white cardstock 2x to 4 x 6”. Add 1” double sided tape to the top of one of the pieces and burnish well. Diecut using the largest Ornate Window Die, score underneath the tape and set aside. Stamp the Ornate window on the other 4 x 6” piece using VersaMark, cover with Ranger Super Fine detail Gold Embossing Powder and heat set using the Heat It tool. Diecut using the coordinating outside die along with the windowpane die to create card front. Diecut a second time from white cardstock and adhere the two together for strength. Using the middle die from the same set, cut clear cardstock and adhere to the back of the window using dries clear adhesive. Cut the journal piece from the Ornate Peacock Paper Collection, sheet 2A, diecut using the outside window die, trim the top, ink the edges with Forget-Me-Not ink, and adhere to the diecut with the tape. Adhere that diecut to the card front to create the shaped card. Stamp the window again on Luxe Gold cardstock using VersaMark, cover with the same gold embossing powder, heat set and diecut using just the window topper die. Diecut 4 more times from white cardstock and adhere the layers together using dries clear adhesive. Adhere to the top of the card front.

Stamp the beautiful Ornate Peacock on white watercolor cardstock using VersaMark ink, cover with Ranger Gold Super Fine Detail Embossing Powder and heat set using the Heat It tool. Diecut using the coordinating die and color using Zig Clean Color Real Brush markers – Fl. Green, Yellow, Persian Green and Dark Pink. Diecut once more from white cardstock and adhere behind the stamped image for stability. Lightly shape using the Deluxe Flower Shaping Kit, seat it on the window and adhere using hot glue. Stamp the flourish from the Peacock and Posies Cling Stamp set on watercolor paper using VersaMark, heat emboss the same as the peacock, diecut using the coordinating, color using the same Zig markers and adhere inside the card so it shows through the window. 

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Vibrant Fuchsia ink. Color the fronts and the backs using the same ink, diecut using the coordinating dies and shape using the 3D Clematis Mold. Add additional shaping using the Deluxe Flower Shaping kit. Adhere two petals of the same size together to create each flower and create one medium and three small flowers. Pierce the flower centers and add Bridal Bouquet stamens using hot glue. Stamp the Garden Lily leaves on Deluxe Flower Shaping Paper using English Ivy Archival ink, color the fronts and backs with the same color, diecut using the coordinating die, add additional ink to the edges and shape in the 3D Lily mold. Using a paint brush, add dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Adhere the medium flower and two single leaves to the left bottom of the window. Adhere the three small flowers to the peacock as shown. Try to bunch the three flowers together so that you don’t cover up too much of the gorgeous peacock feathers. 

Stamp the ‘Congrats!’ sentiment from the Celebrate Love Sentiments Cling Stamp set on white cardstock using Archival Forget-Me-Not ink, fussy cut using a small scissor, shape a little with your fingers and adhere above the top left windowpane.     

Other Products: White Cardstock, Strathmore Vellum Surface Cardstock, Diecutting Machine, Hot Glue Gun, VersaMark, Ranger Gold Super Fine Detail Embossing Powder, Dimensional Dots, Misti Stamp Positioner, Paper Trimmer

Instructions:

Cut out the white base of the card and fold it to 5 3/4" x 8". From paper collection cut a slightly smaller rectangle and glue to the base. Then cut a 5 1/2" x 7 1/2" rectangle out of white paper and a slightly smaller rectangle from the paper collection, adhere it the with Double Dots 100 pc. -3D Foam Circles.

Cut out a frame from the Teardrop Lattice Gateway Die set from white paper and glue it to the card.

Stamp element from the Ornate Window Cling Stamp set with black ink on white paper, color it with Memento Rich Cocoa ink. Then cut out with the coordinating die. Cut out the outer frame of the shutter windows from the paper collection, glue underneath the window.Stamp with black ink sentiment in the window from the Cheerful Note Sentiments set.

Stamp elements from the Peacock & Posies set with black ink on white paper, color it with blue, green, red and yellow ink using Stack and Store Daubers. Then cut out with the coordinating die. Shade with Memento Nautical Blue.

Glue everything as shown. Cover the elements of the peacock's tail with glue and glitter.

Other Products: Die cutting Machine

Instructions:

To make the card base, take a sheet of White cardstock measuring 9 x 9 1/2 inches, score and fold along the short side into half to create a base measuring 9 1/2 x 4 1/2. Using the sheets from  HCDP1-2147 Garden Lily Paper Collection, cut 2 pieces of the green pattern paper to size 1/2 inch less than the card base. Sponge the edges of the card base with GoldenRod ink. 

Adhere one piece to the inside card panel. Cut the next piece with the outline die of HCD3-7447 Slim Elegant Rectangle Die and adhere it to the card front using dimensional tape. Using the decorative frame dies, cut twice using each of the dies with white cardstock, stack and glue 2 each and add crystal clear glitter on the die-cuts using dries clear glue. Cut and adhere a yellow pattern paper to the inner most frame using the coordinating die.

Adhere the ready die-cuts on the card front to the outline die-cut piece and layer the inner most frame as well with dimensional tape. Stamp and white heat emboss twice with HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set onto white cardstock and color using water-colors. Cut the images using the coordinating die and add some clear glitter by sponging some dries clear glue. Stamp and die-cut a few images of the sentiment using Golden Rod ink onto white cardstock, color the main image using water-colors and add clear glitter on this piece as well. 

Stack and adhere the sentiment pieces together and arrange the ready elements on the card front using dimensional tape as shown. To finish off the card, add white flat-back pearls around the arrangement as shown. 

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, White flat-back pearls, watercolors, watercolor brushes