Other Products: White Linen cardstock, white cardstock, ribbon, Fun Foam sheet, Copic Markers: B21, B24, YG03, YG23, YG17, R81, R83, R85, Y11, Y15, Y19, Y35, Pearls

Instructions: Card size: 5 x 7”. Cut white cardstock 7 x 11”, fold in half then lay outer die of the Regal Lattice Gateway onto folded card with left side hanging off the edge enough so that the fold does not cut completely off. Cut outer die again from white linen then glue to the top of the card base (this will make a completed looking top so that one side is not flat with the fold). This last step is important to make the front look right. Cut the inner lattice from white linen and foam sheet. Cut inner arched non lattice die out of blue decorative paper. Glue the foam and white linen lattice on top of the blue arch then glue to the card front.

Stamp the sentiment using Summer Sky Memento onto white then die cut with small tag of Alum Tags and Accents. Stamp bouquet on white using black, die cut then color with Copics or favorite coloring method. Glue the bouquet to the front of lattice then add a blue bow to the bottom. Add a blue ribbon to the tag and glue the tag above the bouquet.

Sponge adhesive all over card and flowers then sprinkle with glitter.

Other Products: Black Color Box ink; Black embossing powder; Heat gun; Die cut machine

Instructions: Prepare a 5 x 7” white card base with a piece of the Delightful Daffodil (sheet 12B) cut slightly smaller on top.

With the white card stock, cut the Lattice Flourish Gateway out and adhere to the card as shown.

Stamp the butterfly on velum with the Black Color box ink, add the embossing powder and heat. Cut out with the coordinating die, color with the Zig Markers on the back, use the Flower shaping tool and give a small amount of curl to the wings, add glue to the body of the butterfly.

On white card stock stamp 2 of the Daffodil Spray, Daffodil bouquet and the leaves with the Black Color box ink, add embossing powder and heat. Use the coordinating dies and cut out. Color with the Zig markers. Add the leaves from the Large Floral Urn, put foam dots on the back of the bouquet and adhere on top of the leaves. Die cut the Daffodil spray, add foam dots to the back and adhere to the top of the card. Cut one of the daffodils from the other spray, add a foam dot to the back and adhere on top of the one in the bouquet.

To finish, add glitter and butterfly.

Other Products: Adhesive backed foam, Bristol Smooth Cardstock, white embossing powder, heat gun, pigment ink

Instructions: Cut the card base from white cardstock with the Elegant Swirl Gateway Die. Cut a piece of blue paper from the Delightful Daffodil Paper Collection to fit with the same die, distress with Summer Sky and adhere to card front. Cut out the Elegant Swirl Gateway Die in white card stock and adhere to card front. Cut a piece of blue designer paper with the center die of the Elegant Swirl Gateway Die, adhere to adhesive backed foam.

Stamp the arched spray from the Delightful Daffodil Spray Cling Stamp Set and the large daffodil from the Delightful Daffodil & Butterfly Cling Stamp Set in Jet Black on Bristol Smooth cardstock. Color all with Zig markers and cut out the arched spray with coordinating dies, cut out the large daffodil with the center die with the Elegant Swirl Gateway Die. Adhere large daffodil to the center of the card.

Stamp the sentiment from the My Friend Sentiments Cling Stamp Set in pigment ink on vellum and heat emboss with gold embossing powder, cut out with scissors using center die of Elegant Swirl Gateway Die as template and adhere with outer frame over large daffodil. Sculpt and adhere the curved spray to the top of the card.

Stamp the butterfly from the Delightful Daffodil & Butterfly Cling Stamp Set in black on Bristol Smooth card stock, color with Zig markers and cut out with coordinating die and adhere the filigree butterfly cut from vellum with the Delightful Daffodil & Butterfly Die. Adhere as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, promarkers

Instructions: Cut out a 11 x 3 3/4” piece of yellow paper from Delightful Daffodil Paper Collection. Line up the short side at 4, 5, 9 and 10”, line up the long side at 2 3/4”, fold and make an open box. Cut out 2 biggest frames with the Regal Lattice Gateway Die and adhere them to the box to create a spring basket.

Stamp the flowers with Delightful Daffodil & Hyacinth Cling Stamp Set in Tuxedo Black ink on Deluxe Flower Shaping Paper. Stamp 4 sprays with Delightful Daffodil Spray Cling Stamp Set in Tuxedo Black ink on Deluxe Flower Shaping Paper. Color them with promarkers and cut out with matching die. Cut off the middle flowers from two sprays and adhere them to another sprays with adhesive foam. This make sprays more dimensional. Stamp leaves with Oakberry Lane Cling Stamp Set in Leaf Green on Deluxe Flower Shaping Paper, color them with Stack and Store Daubers and Leaf Green ink, cut out with matching die and shape with shaping mold. Then use dimensional adhesive to attach all elements onto basket as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Brad, bows, scissors/trimmer, distress oxide ink blue, versafine onyx/grey, clear embossing powder, pink gel pen for rosy cheeks, corner punch

Instructions: Cut white cardstock 12 x 4” and score every 1 1/2” both landscape and portrait, giving you 1 1/2” scored squares. Cut 1 x 4 1/2” joining strip and score portrait down the centre, trim from both edges to form a point at each end, this helps to hide the joining strip.

Lay the scored 12 x 4 1/2” out landscape from the top row of squares count squares from the left and completely cut away squares 3, 4, 5. On the 2nd row completely cut away square 4. With scissors, make a cut line to run the length of the square (1 1/2”) adjacent to the cut away area, for example: top row the 3rd square was cut away, the square adjacent is square 2, cut the bottom score line under square 2, this will mean square 2 is attached to square 1 by only one score line. Repeat this to every square next to the area cut away (there will be photos on my personal blog to help).

Burnish all the score lines. Row 3 square 4 will be the top of the card (B)Baby/Boy. Adhere each opposite squares next to the area cut away which will form step (O) and (Y).

Colour the cardstock blue (or use a coloured cardstock). Adhere the joining strip and form the step shape.

Die-cut Tender Moments Paper Collection mats for each square using Cut Mat Create 2B 1 1/2” round square and adhere to each square. Cut a mat in white cardstock and round the corners with a punch, edge in Archival Sky Blue and adhere to each square. Die-cut mat and layer 2 3/4” and 2 1/2” rounded square and adhere over cluster of 4 squares. Die-cut Ticket Tag from Album Tags and Accents Die and stamp WELCOME from Welcome Baby Cling Stamp set and Baby Boy from Baby’s Air Balloon Cling Stamp Set. Adhere with hot glue to keep a bow front shape to the tag and complete with bows each side.

Die-cut a Tender Moments Paper tag using Ticket and Tags Die and fasten to one of the square mats and layers with a brad prior to fixing.

Stamp Welcome Baby and Baby’s Friend in versafine and clear heat emboss. Color with Zig Clean Color Markers. Trim out individual letters B A B Y B O Y with scissors and add to the step card using foam pads.

Mat and Layer Cut Mat Create 1A 3 1/2 x 3/4” and stamp out CONGRATULATIONS from Welcome Baby Cling Stamp set and adhere to the inside bottom of the card. Add designer paper/white cardstock to the bottom of the card for message. This card folds flat.

Other Products: White cardstock, foam adhesive, scissors, acrylic stamping block, funnel tray, scissors, paper trimmer, die cutting machine

Instructions: Use white cardstock and cut to 10 3/8 x 6”. Score at 5 1/8”. Use the 4th smallest rectangle and diecut the center of the card base, then fold. Cut pink designer paper from Delightful Daffodil paper collection to 5 13/16th x 5”, die cut the center with same rectangle die as card base. Ink with Rose Madder ink along the edges and towards the bottom to create a gradual fade. Adhere onto card base using foam adhesive. Use 3 dies from Teardrop Lattice die to diecut an arched frame from white cardstock. Repeat this to get a second frame. Use a scissors to remove the rounded arch from one frame, you’ll need the bottom section from the second diecut, snip and splice these two together to create one rectangle that fits the card base. Apply Dries Clear glue onto a sponge and dab randomly on the white lattice frame, then sprinkle with Baby’s Breath glitter and tap off. Adhere onto card base using foam adhesive.

Use the 5th to smallest rectangle to diecut background paper from paper collection. This will be slightly larger than your card base opening. To stamp the sentiment on rectangle, use French Ultra Marine ink on entire stamp then add Manganese just onto the bottom word, creating a monochromatic look. Adhere rectangle on inside of card base.

Stamp images from HCPC-3945 stamp set onto white cardstock using Jet Black ink, diecut with coordinating die. Color flowers with Buttercup and Rose Madder ink, the grape hyacinths with French Ultramarine ink. Use Deep Purple and Manganese ink on some hyacinths to create various shades of blue. Use scissors to cut into some of the flowers allowing you to create more dimension. Shape using Deluxe Flower Shaping Kit. Adhere onto card base using Dries Clear Glue and foam adhesive.

Diecut the butterfly overlay from white cardstock, shape gently with the stylus then adhere onto the inside panel of card base. Apply glue on butterfly and sprinkle with Baby’s Breath glitter for a dazzling look.

Other Products: White cardstock, Big-Shot Machine.

Instructions: Card size 5” x 7” (tent fold card). Take pattern paper from the collection HCDP1-2124 Delightful Daffodil Paper Collection, distress the edges and adhere on card base using Designer Dries Clear Adhesive.

Cut two dies from HCD1-7283 Courtyard Elegance Die on gold cardstock and adhere it using designer dries clear adhesive. Cut another die from HCD1-7305 Ornate Ovals Die on white cardstock and add sentiment from HCPC-3844 For My Friend Sentiments Cling Stamp Set using archival ink-library green, adhere it using foam tape, as pictured. Cut two strips of die from HCD1-7245 Adorn it Pocket Accents Die-Adorn It Pocket Opening Die on gold cardstock and adhere it on the top and bottom edges of pattern paper using Designer Dries Clear adhesive.

Stamp flower bunch image and hyacinth image from HCPC-3943 Delightful Daffodil and Butterfly Cling Stamp Set and HCPC-3944 Delightful Daffodil and Hyacinth Cling Stamp Set on white cardstock using archival ink-Jet Black, and cut them with coordinating die, color them using Zig Clean Color Real Brush Markers and arrange them using foam tape.

Other Products: Granny apple green card and ink pad – Stamping Up!, parcel string, 8” square white card base, clear embossing powder, foam pads, stamping card, hot glue Copics used Y00, Y04, Y08,Y21, YR16, G40, YG03,B000, B00, B02

Instructions: Cut a 7.25” square paper from the collection, adhere to a slightly larger square of green card and then adhere to the card base.

Cut a 7.25” x 2” strip of paper from the collection and adhere to a 2.25” strip of green card across the centre of the card base. Die cut the largest booklet frame and cut in half. Adhere one half to the top of the centre strip and one half to the bottom.

Select a 6” panel from the paper collection and trim to 5.75” square. Adhere to a 6” square piece of white card and adhere to the centre of the card base using foam pads.

Die cut the ornamental tag twice using paper from the collection and adhere together to create the sentiment background. Apply dries clear adhesive to the decorative parts of the die cuts, sprinkle with glitter and adhere to the card base, positioned as shown.

Stamp the sentiment onto white card using the green ink, cover with clear embossing powder, remove excess and heat to set. Die cut and adhere to the card using foam pads.

Stamp the daffodils and hyacinth using black memento ink (second stamp off so that it is pale in colour). Colour using alcohol markers and die cut. Shape using the flower shaping tools and hot glue into position onto the card base.

Tie a parcel string bow and add to the card using hot glue

Other Products: Scoring board, strip of vellum paper, Seedless Preserve distress oxide ink, Fossilized Amber distress oxide ink, blending brushes, dimensional tape, versafine onyx black ink

Instructions: Make a 7” x 5” top fold card base from white card stock. Cut a pink background pattern paper from the paper collection. Make score line at 1/8 inch intervals on the pattern paper using the score board. Adhere this on the card front.

Cut the die cuts from Elaborate ovals die. Cut out four corners from the album tags and accents die. Distress one frame with fossilized amber ink. Adhere this on a white die cut. Distress the four corners with yellow ink. Cut two ovals, one smaller than the other, from the Eyelet ovals set and layer them on top of each other. Add this to the card front along with the four corners.

Stamp the daffodils on the white card stock with black ink and colour with Zig markers. Cut with coordinating die and add to the card front.

Stamp the ‘Happy Mother’s Day’ sentiment on a strip of vellum, diecut using the Album Tags and Accents Die and add to the card front. Secure with a pearl.

Other Products: Watercolor paint, cutting machine, pearls, white cardstock 120g

Instructions: Card size is 5 x 7”. Using Teardrop Lattice Gateway Die, cut paper 6B from the Countryside Cottage Paper Collection and add to the Gateway card base front using dries clear adhesive. From white paper, cut out the rest of the frame. Glue on the finished base as shown. Using the same outside die cut designer paper 2x for the inside of the card. Using Regal Lattice Gateway Die set, cut white cardstock 2x and adhere on the inside designer papers.

Stamp with black ink the branches, hydrangea flowers and bike, cut out with the appropriate dies. Paint the branches and the bike with watercolor paints. Use the daubers to color the hydrangeas with blue, pink and purple ink. Create two hydrangea flowers consisting of 2 petals, a smaller and a larger one. Put them together with glue and put a bead in the center of each flower. Place the branches from the top and part to the sides. 

Place the branches from the top and part to the sides. Put small flowers and hydrangea flowers on them. Place the bike on the bottom. Use 3D foam cubes. Complete the composition on the arch with two tiny flowers and white pearls as shown.

Other Products: White cardstock, pink cardstock, yellow glittered brads, Copic Markers: Y11, Y15, Y19, Y35, R81, R83, R85, B21, B24, YG03, YG23, YG17, Foam Tape/Pop-ups

Instructions: Card size: 5 x 7”. Cut white cardstock 7 1/4 x 11”, fold in half, with fold on left side place outer die of Teardrop Lattice Gateway die barely off the fold then cut. Cut a yellow decorative paper with outer die and glue it to card base. Cut the decorative part of die out of white and cut just the inside solid piece out of pink decorative paper. Glue the pink under corresponding white center part then glue the white down onto yellow paper.

On a separate piece of white, sponge with Summer Sky ink then cut it with the Happy Birthday from the Lattice Flourish Gateway Die. Cut a tag from Album Tags and Accents sponge the edges blue then glue the Happy Birthday to it. Insert the yellow brads then glue the tag down onto center of card front.

Stamp daffodil spray top and bottom and the bouquet using black, die cut then color with preferred coloring method (Copics used here). Cut just the pink blossoms from the bouquet then add them to the bottom spray. Pop up sprays top and bottom.

Stamp Cherry Blossoms onto pink cardstock using Magenta Hue, die cut, form from the back with a stylist, turn them over and push down the centers then fill them with pink Prills. Add the tiny flowers to the top spray.

Glitter the card and flowers.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, cheesecloth, Gutermann sewing thread, ribbon,

Instructions: The finished card measures 4 inches by 6 inches. Cut a 8 x 6” white cardstock and fold at 4 inches to make a side fold card. Cut with the biggest tag of the Album tags and accents die kit. With the same die, cut a piece of green paper (#3B). Ink the edges with the leaf green ink and glue it on the top of the card. With the second biggest die, cut a piece from the same paper, ink the edge with magenta hue ink and glue it on the base too. With the same die, also cut 2 other pieces from the paper #1B and glue inside the card.

From the Ornate oval die, cut an oval in green paper and ink the edge in leaf green. Glue it with 3D foam on your card base. On a white cardstock paper, stamp flowers with black ink and color with Zig markers. Die cut with the appropriate die. Add 3D lacquer on your stamped image to make it shine. On the oval, put some ribbon and thread and glue the flowers you just colored on it.

Stamp a sentiment on a white cardstock with black ink, die cut with a little tag. Ink the edges in pink and glue it on your card.

Other Products: Embossing Pad, White Embossing Powder, White Acrylic Paint, Toothbrush, Heat Gun, Cheesecloth, Beads, Stampin Up Ink (Baroque Burgundy, So Saffron, Blush Blossom), Creative Embellishments Chipboard Border, Scrapbook Adhesives by 3L (Crafty Foam Tape, Dual Tip Glue Pen, 3D Foam Squares, E-Z Runner Ultra, Adhesive Dots Micro)

Instructions: Begin creating the layered background for the layout. White cardstock 12x12, cut black cardstock to 11x11. Cut a circle from white cardstock that is 8”, and a patterned pink circle that is 7.5”. Adhere the large black and white cardstock layers together, and then trace the pink patterned circle in the middle of the black cardstock. This will be the guide for stamping the wreath. Using the pointy leaves image, stamp using an embossing pad at the top and bottom and both sides of the circle. Emboss using white embossing powder. Using the same stamp, add images between the ones you have just stamped. Using the rounded leaves stamp, add images in between all of the pointy leaves. All using an embossing pad and white embossing powder.

Using white acrylic paint and a toothbrush (it doesn't have to have Iron Man on it haha) splatter paint all around the wreath. Let dry completely. Adhere the cardstock and patterned circles to the middle of the layout. Cover the chipboard border using the same white paint. Then adhere to the right side of the patterned circle. Next, double mat the 4 x 6” photo in white cardstock and adhere to the layout using foam tape.

Stamp and die cut 2 sets of each size of the Small and Large Wild Rose using dark pink ink (Stampin Up- Baroque Burgundy) onto Deluxe Flower Shaping Paper. Add color to the flowers using light pink ink (Stampin Up- Blush Blossom) and daubers. Then add color to the middle of each flower using yellow ink (Stampin Up- So Saffron) and daubers. Shape the flowers using the coordinating 3D Wild Rose Shaping Mold. Assemble the flowers and then add beads to the middle of each using liquid adhesive. Let dry completely. Add a larger flower to either side of the matted photo, adding cheesecloth under each. Add a smaller flower to the right hand side, also with some cheesecloth under it.

Other Products: Hot Glue Gun; Die cut machine; Paper Trimmer

Instructions: Prepare a 5 x 7” white card base with a piece of the Dazzling Dahlia paper (sheet #1) trimmed slightly smaller on top.

Die cut one of the Regal Lattice Gateway out of the white flower shaping paper and adhere on top.

Stamp the Wild Rose flowers on the Flower Shaping paper with the Elderberry ink, color in with the Lulu Lavender, die cut with the coordination die, color the edges with the Sweet Plum and place in the coordinating mold to shape. Use the golf tool to place a hole in the center of the flowers, add stamens with the hot glue and adhere to the card.

Stamp all the leaves with the Bamboo Leaves ink, color with the New Sprout ink, die cut with the matching die, place the leafy accents in the coordinating moldto shape, ink the edges with more of the Bamboo Leaves ink. Shape the leaves from the Large Floral Urn set with the Flower Shaping tools. Adhere all leaves to the card under the flowers as shown.

To finish, add glitter to all the leaves and flowers.

Other Products: Twine, watercolor markers

Instructions: Cut the base out of white paper with the largest die from the Teardrop Lattice Gateway Die set. Use the same die to cut 3 pieces from the paper collection and glue on top of the base and in the center of the sheet. At the top of the sheet, cut an opening with the smaller frame from the kit. Then, from the white paper, cut the frame from the Teardrop Lattice Gateway Die with the opening that matches the top of the sheet and glue it. From white paper, cut out the 5th largest frame with frills from the Eyelet Frame Gateway Die kit and glue it in the center of the card. Cut a smaller frame with a smooth edge from the paper collection, then add a stamp from the Elegant Gateway Sentiments Cling Stamp Set and color it. Glue the inside of the sheet as shown in the photo. Cut the white frame from the Ornate Ovals Die kit and Adhere it in the lower left corner of the paper.

Stamp images from Delightful Daffodil & Butterfly Stamp Set and Delightful Daffodil Spray Stamp set in green ink. Color with watercolor markers and cut out with coordinating dies.

To create Asters, stamp the Wild Aster Stamp Set on the Deluxe Flower Shaping paper a few times using Archival ink -Rose Madder, color with the same ink and die cut using the coordinating dies. Shape using Deluxe Flower Shaping Kit. Layer the petals together using the hot glue gun making sure to offset them. Then place glue in the center and apply Go Man Go Prills. Apply glue and sprinkle with Rajni Chawla's Crystal Clear glitter.

Stamp the leaves from the Floral Shoppe Accents Cling Stamp Set and the grasses from the Barnyard Accents Cling Stamp Set with Ranger Archival Ink - Leaf Green and cut with coordinate dies. Shadow using the same ink.

Stamp the bike from the Cottage Lifestyle Cling Stamp Set, color it with watercolor markers and cut it out with a matching die.

Arrange everything as pictured, glue it with hot glue and add a string.

Other Products: White Cardstock, Die Cut Machine, Dimensional Tape, Prismacolor Pencils: PC918, PC930, PC929, PC933, PC932, PC912, 742 1/2, PC917, PC931, PC911, PC908, PC916, 734 White Seam Binding, Gamsol, Blending Stumps

Instructions: Using the largest die cut a shaped card for the card base. Cover with a piece of Sheet 4B of the paper Collection. Using Sheet #12B cut out pieces to layer on the card front as well as some using white cardstock. Glitter the white die cuts and on the largest diecut, use dimensional tape to adhere to card front. Glue the other layers down onto the card front.

Stamp the flowers with Rich Cocoa ink and color using the pencils and gamsol. Use coordinating dies to die cut the flowers. Add glitter and set aside to dry. Lay down some color from the Dull Blue Marker, spritz with water and drag the seam binding through the puddle to color. Scrunch and allow to dry. Tie a bow and once the flowers are glued to the card front, glue down the bow.

Stamp the butterfly onto a piece of Sheet 12B paper using Danube Blue ink cut out with coordinating die and glitter. Set aside to dry. Using the vellum, cut out the overlay for the butterfly and glitter and allow it to dry. Glue the butterfly and the overlay together and glue to the card front. The card is finished.

Other Products: Altenew watercolors, Brustro watercolor cardstock, Brustro Green gold brushes, double sided foam tape, silver rhinestones and big pearls.

Instructions: Cut a piece of 5 3/4" x 5 3/4" pattern paper from Delightful Daffodil Paper Collection and adhere it on a 6" x 6" white card base. Die cut a piece of white and a piece of Luxe Silver Cardstock using the dies from Eyelet Frame Gateway Die, Lattice Flourish Gateway Die and Teardrop Lattice Gateway Die. Adhere the silver die cuts behind the white die cuts slightly offset. Cut the fence die cut in 3 parts and adhere 2 pieces on left and right edge and the gateway die cut in the remaining gap between the 2 die cuts. Use double sided foam tape to adhere all the die cuts.

Ink the image from Delightful Daffodil & Hyacinth Cling Stamp Set with Jet Black Archival Ink and stamp it on a piece of scrap paper and then immediately stamp on a piece of watercolor cardstock to get a lighter 2nd generation stamping. Color in the image using Altenew watercolors. Die cut the image and 3 more pieces of white cardstock using the matching die from Delightful Daffodil & Hyacinth Die. Adhere all the die cuts together to form a thicker piece and adhere this on the card front as shown using double sided foam tape. Make the Daffodil stamens using Apple Green Nuvo Crystal Drops Gloss.

Adhere the pearls and rhinestones to add the finishing touch.

Other Products: Foam squares, Iris cardstock, heavy cardboard, white cardstock, spray adhesive, Stampin Up Tufted embossing folder (retired)

Instructions: Cut a piece of Deluxe Flower Shaping Paper 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”. Cut a 6” x 6” panel from the paper collection. Stamp the image from the HCPC-3847 Celebrate Love Sentiments Cling Stamp set in Jet Black ink on the bottom left of the paper and then adhere to the front of the card. Cut the same 6” x 6” panel from the paper collection and die cut the top and bottom using the edge die from the HCD1-7212 Petite Pocket Accents Die set. Adhere to the front of the card using heavy cardboard. Die cut two decorative edges from the HCD1-7212 Petite Pocket Accents Die out of white cardstock. Add Frosting Powder to the dies using spray adhesive and adhere to the edges of the previously cut paper.

Die cut the decorative oval using the #1 die from the HCD1-7305 Ornate Ovals Die set out of white cardstock. Add Frosting Powder to the edge with Dries Clear glue on a dry sponge. Adhere to the front of the card using a piece of heavy cardboard. Die cut the eyelet oval out of white cardstock using the eyelet edge die from the HCD1-7156 Eyelet Ovals & Basics Small Die and adhere to the middle of the decorative oval die. Die cut an oval out of white cardstock using the #2 die from the HCD1-7156 Eyelet Ovals & Basics Small Die set. Emboss using the Tufted embossing folder and adhere to the front of the card

Stamp the large and small daffodils from the CPC-3943 Delightful Daffodil & Butterfly Cling Stamp and the HCPC-3944 Delightful Daffodil & Hyacinth Cling Stamp in Jet Black ink on Iris Cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the front of the decorative oval using foam squares on some of the flowers to create dimension.

Stamp the butterfly image from the CPC-3943 Delightful Daffodil & Butterfly Cling Stamp in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Add Crystal Clear glitter to the wings using Dries Clear glue on a dry sponge and then adhere to the left of the flowers as shown with foam squares.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels 241, 224,

Instructions: For the card base use Gateway Fold Card – White. Cut front panel using outside die from the Scalloped Flourish Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Teardrop Lattice Gateway Die outside frame from paper collection and Luxe Gold Cardstock. Add gold frames under paper collection frame cut dies and adhere to the front of the shaped card using Darice Adhesive Foam Strips.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Paradise Teal and cut using the coordinating dies. Colour with Gallery soft oil pastels 224 and 241. You will need 2-3 petals for each to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using large shaping tool. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape using Wild Rose Mold.

Stamp the Hyacinth using Delightful Daffodil & Hyacinth Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Garden Patina and Ranger Archival Ink Pad - Leaf Green. cut out with the coordinating die, shade use this same ink and shape. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Elegant Gateway Sentiments Cling Stamp Set on paper from the collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Foam tape, alcohol markers, nida tanweer magic glitter.

Instructions: Create a gateway card using the gateway fold cards. Cut the pattern papers from Delightful daffodils paper collection using the Teardrop Lattice gateway die set, layer it with the luxe gold cardstock and glue on the card front.

Stamp the images from the Delightful Daffodils and Butterfly Cling Stamp set, Delightful Daffodils and Hyacinth and Delightful Daffodils Spray Cling Stamp set using archival fern green. Color the stamped images using alcohol markers. Cut the images using their coordinating dies. Arrange the colored images as shown and adhere using foam tape.

Lastly dust the images with nida tanweer magic glitter powder.

Other Products: Die Cutting machine, Trimmer or Guillotine, Score board, Scissors, Bone folder, Memento Dye Ink Pad - Dandelion, Satin white ribbon, Lace white ribbon

Instructions: Tent card measures - 5 1/2 inches by 7 inches. To create a card base - cut out a 5 1/2” x 7 1/2” piece of HCPP1-438-2 White Card and score it at 2 1/2”, 5”, 6” and 7” (long side up). Fold using a bone folder along the score lines, then assemble the card base using Dries Clear Adhesives. Die cut two decorative rectangles from HCDP1-2124 Delightful Daffodil Paper Collection using HCD1-7282 Eyelet Royale Die, then adhere them to the two 2 1/2” x 5 1/2” pieces of HCDP1-2124 Delightful Daffodil Paper Collection and adhere final pieces on the front and back of the card base using DDOTS 3D foam. Die cut decorative oval from HCG P1-488 Luxe Gold Card using HCD1-7305 Ornate Ovals Die and eyelet oval from HCDP1-2124 Delightful Daffodil Paper Collection using HCD1-7156 Eyelet Oval & Basics Small Die, adhere the eyelet oval on the back of the decorative oval then adhere the final piece to the card front as shown. Die cut eyelet oval from HCDP1-2124 Delightful Daffodil Paper Collection using HCD1-7156 Eyelet Oval & Basics Small Die, then distress the edges with Memento Dye Ink Pad - Bamboo Leaves using HCDA1-449 daubers and adhere it on the center of gold oval as shown.

Stamp the Calla Lily flowers from HCPC-3897 Calla Lily Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Dandelion using HCDA1-449 daubers. Die cut the image with matching HCD1-7275 Calla Lily Die, shape them using HCST1-401 Deluxe Flower Shaping Kit, then assemble Calla Lily flower petals using a hot glue gun and HCS1-485 Pastel Pollen Stamens. Adhere the flowers to the card front using hot glue gun.

Stamp the Calla Lily leaves from HCPC-3897 Calla Lily CLing Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Bamboo leaves using HCDA1-449 daubers. Die cut the image with matching HCD1-7275 Calla Lily Die, shape them using HCST1-401 Deluxe Flower Shaping Kit and adhere them to the front of the card as shown.

Stamp the daffodil image from HCPC-3943 Delightful Daffodil & Butterfly Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leaves and Dandelion using 282873 Tombow Dual Brush Maker N00 Blender and HCDA1-449 daubers. Die cut the image with matching HCD1-7341 Delightful Daffodil & Butterfly Die and adhere it on the centre of eyelet oval.

As a final touch, apply 3-D Crystal Lacquer 4 oz 3D1844 and glitter on selected leaves and flowers and leave it to dry completely, then adhere two bows on the front of the card using hot glue gun.

Other Products: Inks: Spectrum Noir: Harmony Ink Grasshopper. Spectrum Aqua blend pencils: Daffodil: Primrose, Wheat, Sunshine, Strawberry. Leaves: Pesto Green, Oregano. Hyacinths: Blue Marine, Pesto Green. Butterfly: Asphalt, Blue Marine, Sunshine, Bison, Umber. Door: Brass Persimmon, Pineapple, Sepia. Diamond stickles, Double sided tape, Double sided 3D foam tape, Clear embossing powder, Versa-mark, Inking Tool, Card board corrugated box (to use as 3D)

Instructions: This easel card measures 6 inches x 6 inches. Taking the pre-made swing card base, fold the square in half next to the circle for the easel stand. Using the sheet 5A from the paper collection for the matting of the card base. Mat all the card base that will be seen when the card is standing. The matting is cut a little smaller than the card base. Adhere in place. Use the circle die from the rounded sunlight window die set for the matting for the card front circle. Ink the edges with the Lemon tonic ink then adhere in place. Adhere half of the folded card to the circle so it can stand and make the easel card.

Taking the white card stock, stamp and matching die from the French doorway set also the versa-mark, clear embossing powder and the heat tool. Make the doorway. Use the pencils listed to bring color to the doorway. Adhere to the circle on the card front then trim away any excess paper hanging over the circle. Use the card board or 3D foam dots to raise the door and door frame.

Using the white card stock, stamp and die sets to make the Daffodil borders, hyacinths and butterflies. Make the sentiment by using the stamp and matching die set. Cutting extra layers to give the sentiment hight and for the sentiment back ground. The sentiment has also been finished with the clear embossing powder. The sentiment is used as the easel card stop. Adhere all to the card front decorating as shown. Apply the diamond stickles to the Daffodils, apply also to the butterflies. Make and adhere the butterfly vellum wings to the butterfly bodies. Adhere also in place

Other Products: Champagne Metallic Cardstock, Watercolor Paper, VersaMark, Foam Square Dimensionals, Embossing Folder, Sheer Shimmer Spray Sparkle

Instructions: Double front card size is 4 1/4 x 5 1/2”. Cut champagne metallic cardstock 6 x 5 1/2”, score at 1 3/4” and fold. Cut metallic champagne cardstock to the following sizes: 1 1/4 x 5”, 7 1/2 x 5” scored at 3 3/4” and x2 3 3/4 x 4 1/2”. Cut Luxe Gold Cardstock to the following sizes: 1 5/8 x 5 3/8”, 4 1/8 x 5 3/8” 4 1/8 x 5 3/8” and x2 3 1/2 x 4 3/4”.

Adhere the 1 1/4 x 5” champagne cardstock to the 1 5/8 x 5 3/8” gold cardstock and adhere to the card front. Using an embossing folder, emboss one of the 3 3/4 x 4 1/2” pieces of champagne cardstock, adhere to 3 1/2 x 4 3/4” gold cardstock and then adhere to card front. Adhere 4 1/8 x 5 3/8” gold cardstock to inside of card. Stamp ‘Hope your day is as special as you are’ on the inside of the folded 7 1/2 x 5” champagne cardstock using VersaMark ink, sprinkle with gold embossing powder and heat set using Heat It tool. Adhere onto 4 1/8 x 5 3/8” gold cardstock. Stamp ‘Happy Birthday to You’ on the other 3 3/4 x 4 1/2” champagne cardstock using VersaMark ink, sprinkle with gold embossing powder and heat set using Heat It tool. Adhere to the other 3 1/2 x 4 3/4” gold cardstock and adhere to the front of the 3 3/4 x 5” folded card.

Stamp the spray from the Delightful Daffodil Spray Cling Stamp Set on watercolor paper using VersaMark, sprinkle with gold embossing powder and heat set using Heat It tool. Color with Zig Clean Color Real Brush markers and diecut using coordinating die. Diecut a second time and adhere the layers together. Spritz with Sheer Shimmer Spray-Sparkle, shape using the Deluxe Flower Shaping Kit and adhere to the card front as shown using dimensional squares.