Other Products: Scoring board, die cutting machine, white card stock, Dress My craft 180 gsm vellum sheets, Distress oxide ink –Picked Raspberry, Fossilized Amber, White embossing powder, Embossing ink, heat tool, hot glue

For more tips on creating with the Wild Rose Collection, watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: The finished card measures 6 x 6". Make card base from white card stock. This is a top folding card. Cut a mat layer from paper collection that is a little smaller than the card front. Adhere on the card. Using the Luxe gold paper, cut a die cut from the Stairway die set and adhere to the mat layer.

Stamp the wild rose flower images several times on the vellum paper with clear embossing ink. Add white embossing powder and heat set. Cut with matching die. Use two big flowers and three small flowers to make one complete flower. Stamp, emboss and diecut a couple of the rose leaves as well.

Stamp some leaves from classic rose collection with Library green ink onto white card stock. Colour with leaf green ink and cut with matching die. Shape with groove tools.

Colour the vellum flowers with Distress oxide inks and shape a little. Layer the big and small flowers together and cup deeply. Add a hole in the centre and make a bunch of stamens and add to the flowers. Make vellum leaves also.

Arrange the flowers and leaves on the card front. Cut a sentiment from the paper collection and add to the front to finish the card.

Other Products: White cardstock, hot melted glue, organza ribbon

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the pocket accent dies, watch the tutorial at https://youtu.be/A8sxtkGXWLQ.

Instructions: To see a large view of this card, click here. Ready top side fold card measures 8.5 x 6.5". First, choose a pattern paper from designer paper collection and cut a piece measures 8.25 x 6.25". Distress edges with a pair of scissors and adhere it on ready card base. Cut 2 decorative pieces from white cardstock using Adorn it pocket Accents die. Apply crystal clear on die cut pieces using clear adhesive and glue on card as shown in the picture. Further, cut a piece of white cardstock measuring 8.5 x 5.5". Cut a piece of designer paper measures 8.25 x 5.25". Distress edges with matching ink and mat it on white cardstock. Adhere it on center of card using dimensional tape. Cut a piece of white cardstock using Ornate Pocket Accent die. Glue it on card and create a pocket. Cut a tag from designer paper and white cardstock using Album Tags and Accents die. Arrange tag in the pocket.

Cut a decorative piece from white cardstock and designer paper using Album Tags and Accents die. Cut it into half and glue it using dimensional tape as shown. Cut sentiment from white cardstock using die and glue it. Add some nuvo crystal drops. For flowers, stamp Wild rose flowers on deluxe flower shaping paper using pink peony ink and Sunflower yellow ink. Cut with coordinating die and paint with same ink. Shape flowers using flower shaping mold and add stamens. Stamp leaves using fern green ink on deluxe flower shaping paper and cut with coordinating die. Paint leaves using leaf green and fern green ink. Shape leaves using shaping mold. Arrange flowers and leaves on card and glue using hot glue. Add some Assorted rose hip stamens using hot glue. For finished look apply glitter using designer clear dries adhesive.

Other Products: Scoring board, die cutting machine, white card stock, Dress My craft 180 gsm vellum sheets, Distress oxide ink –picked raspberry, Versafine Onyx Black ink, White embossing powder, Embossing ink, heat tool, hot glue

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The finished card measures 7 x 5". Make card base from white card stock. This is a top folding card. Cut a mat layer from paper collection that is a little smaller than the card front. Adhere on the card. Using the Mat side from the Elegant pockets die set, cut out the die cut with design on bottom side, with white card stock. Trim the top three edges to make it smaller than the card front. Cut another piece of white card stock 6 x 4" and cut die cut design on the bottom edge using the mat die from the same die set as above.

Add some distress ink on craft mat. Spray a mist of water and slide the second mat layer on it to add some colour. Heat set with a heat tool and make score marks at an interval if 1/8th inch on the scoring board. Add to the card base with foam tape.

Stamp the birthday sentiment on white card stock. Using the design shown in card cut out a tag from the Album tags and accents die. Cut a large tag from white card stock and using the label and score on the scoring board. Cut a label window and adhere on the sentiment.

Stamp many images of the small wild rose on vellum paper using embossing ink. Add white embossing powder and heat set with heat tool. Cut with matching die and colour with Archival ink. Shape in the flower shaping mold. Layer two flowers together and Add stamens. Make leaves with deluxe flower shaping paper. Make small filler flowers in the same manner. Add stamens to flower centers.

Arrange the flowers and leaves on the card front. Cut swirly borders in Luxe gold paper and add to the card front to finish the card.

Other Products: White cardstock, Silver stickles

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

To see more of this card, watch this video https://youtu.be/9Xr_SOPieus.

Instructions: Use the Album Tags and Accents large tag die on the white cardstock and on the Wild Rose paper collection. Glue them together to make the base of the tag. Cut another piece on the designed cardstock using the smaller tag die. Add a layer of chipboard or foam tape in between the tag layers.

Use the HCPC-3906 Small Wild Rose Cling Stamp Set and the HCD1-7289 Small Wild Rose Die to cut the flower petals. Then, use the HCFB1-486 Small 3D Wild Rose Shaping Mold to shape the flowers. Put the flower together by adding foam tape in between the petal layers. Insert the stamens on the center of the flower and add the silver stickles.

Use the HCD1-7262 Swirly Border Accents Die and add it on the tag. Then add the flowers on top.

Cut a sentiment from the collection and add it to the tag using a layer of chipboard or foam tape for dimension.

Other Products: Paper trimmer, diecutting machine, hot glue

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Create a basket with the treasured heart gift box die set using pattern papers from the Calla Lily Paper collection. Cut the center of the sides of the box using the die from the Stairway Gardens Die set and cut the top closing flap. Cut the decorative elements from the treasured heart gift box die set. Stick the decorative die cuts on the sides of the prepared basket. Cut a 3cms wide paper strip to create the basket handle. Use the decorative border die from the album tags and accents die set along the paper strip. Adhere the band on two sides of the basket from the inside.

Stamp the flowers from the Small Wild Rose cling stamp set with Archival Fern Green and color them using Memento Rose bud and Lilac Posies. Stamp the leaves from the Leafy Accents cling stamp set using Archival Green and color using Memento Bamboo Leaves and Olive Green. Cut the flowers and leaves using the coordinating dies and shape them using the 3d shaping mold. Adhere the flowers and leaves on the basket handle. Dust the flowers and leaves with crystal clear glitter powder.

Other Products: Mowed Lawn & Vintage Photo Distress Ink, hot glue gun, paper trimmer, die cutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Using ready card base measures 9 x 6". It’s a top fold card. Cut a panel of white cardstock measures 8.8 x 5.8" and adhere on the card base using foam strips. Cut another panel from Wild Aster Paper Collection measures 8.6 x 5.6" and adhere on the white panel using designer Dries Clear adhesive.

Cut two strips of white cardstock measures 8 x 1" and cute two strips from a paper collection which is slightly smaller than white strips and adhere pattern strips on white strips using clear glue. Adhere strip in cross shape on the left slide using 3D foam dots.

Cut 2 shapes from Heart of Joy Decorative die, one on white card and one on pattern paper and stack together using clear glue. Cut doily frame from Round Window Frame Die and set aside. Cut circle from paper collection using Eyelet Circle & Basic Small Die and paste it on round doily frame.

Stamp the flowers from Small Wild Rose Cling Stamp Set on Deluxe Flower Shaping Paper using Vibrant Fuchsia Ink and color with same color using daubers, cut out with coordinating dies, and make three buds and few flowers after shaping with shaping tools than add glitter and prills. Stamp leaves from Large Wild Rose Cling Stamp using leafy green archival ink and color it with mowed lawn distress ink and shape using shaping tool and dress it with glitter. Add Crystal lacquer on flowers and leaves for water drops effect.

Cut sentiment on white card and base on pattern paper using Ornamental Tags Die and layer together using clear glue. Arrange all ready elements, make a bouquet of roses as shown. Add Sentiment tag using foam dots and embellish card using Green Nuvo Drops.

.

Other Products: Martha Stewart scoreboard, white pearl cardstock, glue stick gun, Gallery soft oil pastels 209, 242, wire, kitchen foil, ribbon, clear glass beads, maroon colored ink pad

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Die cut 6 of the box sides using Wild Rose Paper Collection. Score and fold all the lines. Die cut 6 each of the lid panels and the decorative square using Wild Rose Paper Collection and adhere to the panels. Adhere the panels together to create the hexagon box. Diecut 2 hexagons bases and glue it one to the inside bottom of the box and other to the outside base. Die cut 6 single decorative hearts and plain hearts using Wild Rose Paper Collection. Adhere the decorative hearts to the top of lids panels and adhere one to the side of each panel. Interlock the box lid flaps and place flowers on the top.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with StazOn Ink Pad - Black Cherry and cut using the coordinating dies. Colour with Gallery soft oil pastels 209 and 242. You will need 6 petals for flower to create a rose. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool - using bigger one. Use wire and kitchen foil to create flower bud. Layer the petals together using the hot glue gun. Build a rose. Add a little hot glue to the underside of the flower to adhere. Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter.

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Memento Dye Ink Pad - Bamboo Leaves, cut out with the coordinating die, and shade using this same ink and shape. Shape leaves using Mold as shown on the video. Adhere the flowers and leaves to gift box using a hot glue gun. Attach ribbon next to it.

Fussy cut a sentiment ticket from paper collection and place onto the card using adhesive foam strips. Using the red rose hip stamens sponge with maroon colored ink. Dip stamen into dries clear glue then dip into clear glass beads. Once completely dry, sponge stamens with maroon colored ink pad to accent the clear beads to create a raspberry effect. Arrange flowers and leaves around as shown, using foam adhesive and hot glue. 

Other Products: Watercolor paint, hot glue, twine white, 3d squares, white paint, gold ball, paper trimmer, diecutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: To see a closeup photo of this pocket card, click here. Assemble the 4 x 4.5'' pocket from Pocket and Flipfold Inserts A-Kraft. Cover with pink paper from the Wild Rose paper collection. Diecut the sentiment tickets out of patterned paper and glue to the front, wrap one of them with twine. Now you have your tag pocket ready to be decorated.

Diecut the two large tags of the Album Tags and Accents from the patterned paper and layer together as shown. Attach a sentiment at the bottom of tag. This tag will fit inside the kraft pocket you just created.

Now you’re ready to create your floral accents. For the base leaves, stamp the hydrangea several times from HCPC-3901 Fresh Cut Hydrangea stamp set in Ranger Archival Jet Black ink on Deluxe paper. Die cut with the coordinating die. Stamp some of the posies and leaves from HCPC-3874 Purr-fect Posies stamp set in the black ink onto the same paper. Diecut with coordinating dies. Apply green ink to posies, leaves and hydrangea leaves using the dauber. Trim the hydrangea leaves away from the flower, as you will only need the leaves. Next, stamp several of the aster spray from Wild Aster Spray stamp set onto the same cardstock in black ink and diecut with coordinating die. Use the Deluxe Flower shaping kit to shape the leaves.

Stamp a variety of the small Wild Rose petals on the Deluxe Flower Shaping paper. Die cut with the coordinating die. Paint the rose petals with intense color watercolor paint and shape in the mold. Prepare a layer of flowers, roses and buds. Use the small posies as a leaf base for the small buds. Glue the formed petals together. Gently apply white paint to the edges of the flower and leaves. Add a gold accent ball in the center of open rose. Create a composition of leaves, aster sprays, small Wild Roses and buds on the tag and pocket as shown. Decorate with twine. 

Other Products: White cardstock, Melon Mambo ink pad, versafine clair black ink, clear embossing powder, hot glue, ribbon, paper trimmer, diecutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the pocket accent dies, watch the tutorial at https://youtu.be/A8sxtkGXWLQ.

Instructions: Use a 9 x 6.5" white card base and place the top of the Regal Frame and Accents die approximately .5" above the top fold of the card, die cut to give a shaped card. Die cut a second single piece of white card using the same die and adhere this to the base card.

Die cut a patterned paper from the Wild Rose Collection using the large die from the Regal Frames and adhere to the card base. Die cut the largest decorative die using a different paper and adhere to the base card.

Make the flower: Stamp the 3 largest sized flowers onto the flower shaping paper using Sweet Plum ink. Add cantaloupe ink to the centre of the flowers and colour the petals using Lulu Lavender. Die cut and add sweet plum to the outer edges of the petals. Add melon mambo ink to outer edges and blend into the sweet plum ink. Place the flowers face down into the mold and spritz with water. Place the top of the mold onto the flowers and run through the diecutting machine to shape. Add additional dimension to the edge of the leaves using the golf tools.

Take 6 sets of 2 medium stamens and a large rose hip stamen and cover in dries clear adhesive, dip into the glitter and allow to dry. Make a hole in the centre of the flower and thread the stamens through.

Die cut a tag from the paper collection and stamp the sentiment in versafine clair black ink, cover in clear embossing powder, remove excess and heat to set. Create a ribbon bow and hot glue the tag, bow and flower to the card base as shown.

Other Products: White card stock, gold micro beads, paper trimmer, die cutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

Instructions: Prepare a white 5 x 7" card base. Create a slightly smaller piece of the Wild Rose paper, sponge the edges with Cactus Flower and attach onto card base. Die cut a white Lacy Diamond Die out with a smaller Diamond Basic triangle in the center and adhere to the center of the card.

Die cut a few of the 1B Cut Mat and Create swirls out of white and the Luxe Gold paper, set aside. Stamp the Wild Roses on the Deluxe Flower Shaping paper with the Cactus flower ink, color the center with the Buttercup, cut out with the coordinating die and shaping using the mold. Ink the edges with more of the Cactus Flower ink, put 2 together making one, use the golf tool to make a hole in the center and hot glue the stamens in place. Adhere to the card on the left side. Stamp a few of the smaller Wild Roses with the Magenta Hue ink, cut out, lightly ink the edges with the same ink, shape in the mold, adhere to the card around the other flowers. Stamp the leaves on the same paper with the Emerald Green ink, color in with the Leaf Green, cut out, ink the edges with more of the Emerald Green, place in the mold and shape. Adhere around some of the flowers, and add the swirls you cut out earlier. To finish, add Gold Mocro Beads to the center of the smaller flowers and glitter to all the leaves and flowers.

Other Products: Cardstock- White, Gems, Beads, Paper Distresser Tool, Scrapbook Adhesives by 3L (Dual Tip Glue Pen, E-Z Runner Ultra, Crafty Foam Tape, Adhesive Dots Micro), Stampin Up Ink (Old Olive, Always Artichoke, Berry Burst, Baroque Burgundy), Close To My Heart Ink (Gold Rush, Blush)

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: The card base is 6 x 6" in white cardstock. Cut a piece of light pink patterned paper from the Wild Rose paper collection that is 6 x 6" and adhere to the card base. Cut the large Courtyard Elegance piece from white cardstock and adhere to the card front. Cut out 4 of the small Treasured Heart square pieces from white cardstock and adhere them to a piece of the light pink patterned paper, leaving a little border around all sides of each. Mat this patterned square in white cardstock that has been distressed. Adhere this piece to the middle of the card using crafty foam tape. Find and cut out the “Birthday Blessings” sentiment and mat it in a strip of white cardstock which has again been distressed. Adhere to the middle of the card using foam tape.

Stamp and die cut 3 pairs of each of the 3 smaller Wild Rose images using dark pink ink (Baroque Burgundy) onto Deluxe Flower Shaping Paper. Stamp and die cut 2 of the swirly Leafy Accents leaves using dark green ink (Old Olive) onto white cardstock. Add color to the dark pink flowers using Berry Burst Ink and daubers. Add color to the light pink flowers using Blush ink and daubers. Add color to the middles of all of the flowers using yellow ink (Gold Rush) and daubers. Add color to the leaves using green ink (Always Artichoke). Shape all of the leaves and flowers using the coordinating 3D Shaping Molds. Assemble the flowers and then add Prills to the middle of the dark pink flowers and beads to the middle of the light pink flowers using a liquid adhesive. Let Dry.

Adhere a small light pink flower to the top and bottom of the card sentiment. Add the large light pink flowers to either side of the matted sentiment. Add the dark pink flowers next to the larger flowers. Add leaves around most of the flowers. Add gems to the die cut card background and to the small square die cut pieces.

Other Products: Worn Lipstick, Victorian Velvet and Candied Apple Distress inks, Versamark ink, Hero Arts Unicorn White Pigment ink, Cuttlebug Anna Griffin Acanthus Embossing folder, Morning Dew Nuvo Crystal Drops, Creative Expressions clear glass micro beads, Metal box with transparent lid, transparent holographic glitter and pearls

For more tips on creating with the Oakberry blossoms, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Apply a layer of Designer Dries Clear Adhesive to the inside of the lid taking care to not touch the sides and sprinkle Creative Expressions clear glass micro beads and leave to dry.

Stamp the largest flowers from Oakberry Lane Blossoms Cling Stamp Set on a sheet of Deluxe Flower Shaping Paper with Versamark ink and heat emboss using Gold Embossing Powder and Heat It Craft Tool. Ink the flowers with Candied Apple Distress ink and die cut using the matching die from Oakberry Lane Blossoms Die. Spritz both sides of the flowers with water and shape them with Groove Golf Tool Set and Deluxe Flower Shaping Kit. Add gold stamens from Assorted Bead Stamens to the flower centers.

Stamp the flowers from Floral Fashionista Cling Stamp Set on a sheet of Rajni Chawla's Vellum Flowerite with Hero Arts unicorn White pigment ink and heat emboss using White Embossing Powder and Heat It Craft Tool. Die cut the flowers using the matching die from Floral Fashionista Die. Shape the Floral Fashionista flowers using Deluxe Flower Shaping Kit and add a pink stamen from Pastel Bead Stamens to the flower centers and ink the white stems with Leaf Green Archival Ink.

Stamp the leaves from Oakberry Lane Blossoms Cling Stamp Set several times on a sheet of Deluxe Flower Shaping Paper with Olive Archival Ink and die cut them using matching die from Oakberry Lane Blossoms Die. Ink them using Leaf Green, Sunflower and Vibrant Fuchsia Archival Inks. Shape the leaves using 3D Blossoms Shaping Mold. Apply a little Designer Dries Clear Adhesive to the leaves edges and sprinkle transparent holographic glitter.

Die cut a piece of white cardstock using the corner die from Fanci-fold Pocket & Accents Die and adhere it to the lid as shown. Arrange and adhere the flowers and leaves on it as shown. Add a tiny ladybug made with Ebony Black and Red Berry Nuvo Crystal Drops to the floral arrangement. Add few drops of Morning dew Nuvo Crystal Drops on the flowers. Add pearls on the side of the lid.

Take a strip of white cardstock and emboss it using the border embossing folder from Acanthus Embossing folder set. Trim the sides and ink with Worn Lipstick and Victorian Velvet Distress inks. Adhere it to the side of the box and trim off the excess length. Add few pearls to this and on the die cut on the lid to add finishing touch.

Other Products: White card stock, heat gun, paper trimmer, die cutting machine,

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Die cut 6 of the box sides using the white card stock. Score and burnish all the fold lines. Die cut 6 each of the lid panels and the decorative square using the Luxe Gold Paper and adhere to the panels.

Stamp the flowers on the Deluxe Flower Shaping paper with the Magenta Hue ink, color the centers with the Sunflower ink using the Daubers, cut out using the coordinating die, place in the matching mold and run through the machine. Ink the edges with the Magenta Hue ink. Use the golf tool and make a hole in the center, put the stamens in and hot glue in place, add to the center of the box panel as shown. To finish, add glitter to all the flowers.

Other Products: White cardstock, Fun Foam sheet, pearls, Shimmer Gloss, paper trimmer, diecutting machine

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 6 x 6". Cut white cardstock 12 x 6" and fold in half. Cut a 6 x 6 panel from the decorative paper in the Wild Rose paper collection, then trim it to 5 3/4 x 5 3/4", and glue to card base. Cut the large circle from another 6 x 6 panel of the decorative paper with the flowers on the circle, stamp with the sentiment using Magenta Hue. Cut the same size circle from foam sheet then glue it to the sentiment circle. Cut a white Rounded Window die (2nd largest) and cut 2 white hinges, cut each in half.

Glue the white Rounded Window circle to the card in the center, glue the sentiment circle with foam to the center of the white decorative then glue each half of the hinges to each corner of the card.

Stamp the blossoms using Rose Madder and Buttercup, sponge buttercup on the yellow and sponge Pink Peony on the Rose Madder. Stamp leaves from Leafy Accents and from Wild Rose large using Fern Green then sponge with Leaf Green and coordinating blossom colors. Die cut all, then shape in their Shaping Molds. Gloss the leaves. Layer 3 blossoms per flower, pierce centers then insert small and medium stamen except for the 2 largest flowers, just insert small stamen. Glue pearl halves to the centers of 2 largest flowers. (I colored white pearls using alcohol pens). < /p>

Glitter all the flowers and add glitter to the card as well. Glue flowers onto left side and add leaves as desired.

Other Products: Hot glue, 8 x 8 inch card blank, yellow chalk ink, dark grey ink, paper trimmer, die cutting machine

For more tips on creating with the Calla Lily Collection watch the tutorial at https://youtu.be/VWKPoXjpiug.

Instructions: Cut a piece of yellow paper from the Calla Lily Paper Collection Pad to 7" square. Matte onto a piece of green paper from the Collection pad 7 1/2" square. Adhere to the front of 8 x 8" card base, leaving a small gap all around the edges. Die cut two Ornate Pocket Accent Dies in white cardstock. Adhere to the front of the card.

Take the Deluxe Flower Shaping Paper and the Calla Lily Cling Stamp Set and stamp out lots of Lilies and Lily leaves in Olive green ink. Color in using Leaf green ink, die cut with the coordinating dies. Ink the edges of the Lilies and leaves with Lilac Posies ink using the daubers.

Add the petals and leaves to the 3D Calla Lilly Shaping Mold, lightly spritz with water, run through a die cutting machine, tap out. When dry, take the quilling tool from the Deluxe Flower Shaping Tool kit and start to shape the petals into a Lilly shape. Quill one side inwards, and the other side outwards. Ink the reverse side of the Lily that is now showing. Add the stamens with hot glue.

Stamp onto Deluxe Flower Shaping Paper with dark grey ink, the feathery swans from the Swan Lake Cling Stamp Set. Color in with dark grey ink and a dauber and die cut with the coordinating die.

Stamp in Olive green ink the single stem Lilies, color in with Leaf green ink, die cut with the coordinating dies. Ink the edges with Olive green ink. Add a touch of yellow ink to the stamens.

Adhere the Feathery swans with foam tape to the center of the card. Using hot glue, start to decorate the card front with the leaves, Lilies and Lily stems, gluing them all around the swans.

Cut out a sentiment from the paper pad, adhere onto white card, add foam tape to the reverse and adhere to front of the card.

Using the Dries Clear Glue and a small piece of sponge or small brush, add glitter. All done.

Other Products: Inks: Ranger Archival ink-Venetian Orange, White card stock, Scissors, Green organza ribbon, Hot glue gun, Double sided tape, Empty perfume box or such like, Diamond dust, paper trimmer, diecutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: This project measures the size of the gift in a box you have. This project is wrapping a gift without the wrapping, you are decorating the box of the gift. This box is an empty perfume box I had but you can use whatever you have or want to give.

To make the flowers and leaves: Taking the white card stock and the library green ink, stamp the leaves and two of each of the two wild rose from the large Wild Rose set, color these with the Pink Peony and the centers with the Venetian Orange. The outside is highlighted with concentrated Plum. Diecut with the coordinating dies. Two layers of two sizes are used to make the flowers. The centers are filled with clear drying glue then diamond dust is sprinkled over the glue. The yellow from the inked centers will show through once the glue has dried. Set aside to dry. The leaves are colored using the Leaf green and Library green inks. The large flower shaping mold is used to bring shape to the leaves and flower petals.

To decorate the box: Taking the box, measure the box on all sides. The lid and base, the sides and front and back. Write the measurements down then make them all a little smaller so you have the box showing on the sides of the design paper. For this box I chose the design paper with a flower border from the Wild Rose paper collection. Cut the paper to the measurements so the border will be at the foot of the box. The edges are inked with the Archival Plum ink. Adhere the paper pieces to the box using double sided tape. Taking the green organza ribbon, wrap around the box and adhere with the hot glue gun. Make a organza ribbon 1/2 bow by folding the ribbon three times, each fold a little shorter than each other. Adhere with a dot of hot glue. Make two 1/2 ribbon bows. Assemble the flowers and leaves. Arrange on the ribbon line around the box, the flowers and leaves, adhere this with the hot glue gun. To finish the project adhere the 1/2 bows to each side of the flower arrangement as shown. 

Other Products: Heavy cardboard, Nuvo Pure Sheen glitter - Diamond, paper trimmer, diecutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the 6 x 6 Decorative Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Cut a piece of light patterned paper 6 x 6" and adhere to the card front. Die cut the outer decorative die from the HCD1-7283 Courtyard Elegance Die set using the outer decorative die and the plain edge outer a die and inner circle die from gold cardstock. Cut a piece of dark pink patterned paper using the outer plain edge die and then die cut the circle out using the circle die from the HCD1-7283 Courtyard Elegance Die set using the decorative die as a template. Adhere the gold lattice die to the dark pink paper. Die cut the outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of gold cardstock and then use the circle die from the HCD1-7271 Rounded Window Frame Die set die cut the centre out. Adhere the gold decorative die to the lattice die. Adhere the frame to the card front with heavy cardboard. Die cut the cottage image from the patterned paper using the circle die from the HCD1-7271 Rounded Window Frame Die set and adhere to the middle of the circle frame. Add the Diamond glitter to the image with Dries Clear glue. Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiment Stamp set in Cactus Flower ink on patterned paper and die cut with the second smallest arrow die from the HCD1-7204 Arrows and Banner Die set. Sponge the edges of the arrow with Cactus Flower and adhere to the top left of the front as shown with the left edge of the arrow over the edge. Add this to the front of the card.

Stamp the leaf images from the HCPC3907 Large Wild Rose Stamp set in Fern Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Fern Green inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere to the bottom right of the card as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour with Magenta Hue and Tiger Lily ink and die cut with the coordinating die. Sponge the edges with Plum and Magenta Hue inks and shape using the coordinating mold. Add Frosting Powder using Dries clear glue on a damp sponge. Adhere the flowers on top of the leaves as shown.

Stamp the leaf images from the HCPC-3842 Oakberry Lane Stamp set in Leaf Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse ink and die cut with the coordinating die. Shape using the coordinating mold, add Crystal Clear glitter with Dries Clear glue on a damp sponge and nestle among the rose leaves and flowers.

Other Products: Hero Arts white pigment ink, hot glue, foam dots, funnel tray, paper distressing tool by Ranger, Smooth White Cardstock and Die-cutting machine, Distress Oxide Leaf Green, paper trimmer, die cutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The ready top fold card from smooth white cardstock measures 5 1/2 x 8". Choose the pattern papers from the designer paper collection and cut 5 x 7 1/2" paper. Next glue the designer paper on white cardstock making a white border of 1/16" on all sides. Next, add another layer of card panel using coordinating papers and finally layer the card on the ready cardstock using double-sided tapes.

Choose 2 tags from the same paper collection and cut with its coordinating die. Make holes and glue eyelets. Thread natural twine from the holes and arrange the tags as shown using double-sided tape. Cut a sentiment from the paper collection and add onto tags. Diecut 2 of the Heart of Joy die from white cardstock and stack them together. Attach under tags as shown.

Cut 2 doilies using Rounded Window Frame Die, stack them together and distress them using Aged Mohaghany Distress Ink. Cut the prepared doily and make a loop as shown and arrange it on the ready card panel using hot glue.

For the wild roses, stamp the flower petals onto Deluxe Flower shaping paper using Magenta Hue Archival ink and Large and Small Wild Rose Stamp die set and cut them using their coordinating dies. Ink the flowers using Magenta Hue, Cactus Flower and Leaf green and shape them using Deluxe flower shaping kit. Once done assembling the flowers, prick the centers of the flowers and add small frosted thread stamens and glue them from the back with hot glue. For tiny yellow fillers, follow the same steps using the smallest flower from the same collection and Buttercup Archival ink.

For vellum leaves, stamp 2-3 images with white pigment ink on the vellum, sprinkle white heat embossing powder, dust extras and heat set. Cut the images using a coordinating die set and color them using Leaf Green distress oxide. Also, shape them using needle tool.

Attach the flowers and leaves onto the card as pictured, using hot glue. Use the Dries Clear glue to add Rajni Chawla's Crystal Clear glitter to the flowers, leaves and rest of card as desired.

Other Products: White cardstock, Hot Glue Gun, Paper Trimmer, Diecutting Machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: To see the inside of this card, click here. Card size is 6 x 6". Score 12 x 5 3/4" white cardstock at 3" and 9" fold to create a gate fold card base. Diecut the HCD1-7281 Stairway Gardens Die using all the dies from the set from white cardstock. Diecut again using only the outside eyelet die, Cut both in half except for the middle square. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Diecut the center solid square x2 from white cardstock and x2 from designer paper. Cut paper from the Wild Rose Collection 2 7/8 x 5 5/8 x 4 and 5 7/8 x 5 5/8", ink the edges with Lilac Posies ink.

Adhere the solid eyelet diecut to the front right side, then adhere one of the designer papers over it. Adhere one of the designer papers to the front left side, Then, adhere the Stairway Gardens Die over it. Adhere one of the designer center squares to the solid square and adhere to the front card center. Open card and adhere designer paper to the inside left flap. Adhere magnet to center square and cover with white solid square and designer square. Adhere magnet to center of card, then adhere designer paper. Adhere designer paper to the right inside flap.

Stamp the small wild roses on Deluxe flower shaping paper using Sweet Plum ink, color with the same ink, diecut using the coordinating die and shape in the Small 3D Wild Rose Shaping Mold. Layer three same size petals together to create one large flower. Layer two same size petals together to create the small flowers. Use the groove golf tool to make a hole in the center and pull the stamens through. Use the hot glue gun to secure the stamens. Sponge the flowers with dries clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Stamp the Leafy Accents leaves and the Classic Rose leaves on Deluxe Flower Shaping Paper using Bamboo Leaves Ink. Color using the same color and diecut using the coordinating die. Shape using the Leafy Accent Mold and the Rose Mold. Sponge with Dries Clear glue and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Adhere the flowers and leaves to the card front using hot glue.

Other Products: Seam binding ribbon, hot glue, tissue, paper trimmer diecutting machine

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: To see a larger view of this gift box, click here. Cut out six of the Treasured Heart Gift Box Die in designer paper from the Wild Rose Paper Collection and six in white card stock, adhere one of the white card stock pieces to each of the designer paper gift box pieces to give strength to the box. Adhere box together.

Stamp the flowers from the Small Wild Rose Cling Stamp Set in Majestic Violet and sponge with the same, stamp small flowers in Buttercup, cut out with coordinating dies, sculpt with the Small 3D Wild Rose Shaping Mold. Use hot glue to add stamens. Use Dries Clear glue to add Rajni Chawla’s Crystal Clear over flower petals.

Stamp the leaves from the Large Wild Rose Cling Stamp Set in Olive and sponge with Bamboo Leaves, cut out with corresponding dies and sculpt with Large 3D Wild Rose Shaping Mold. Use Dries Clear glue to add Rajni Chawla’s Crystal Clear over leaves.

Add gift and tissue and tie handles together with seam binding ribbon and make bow. Adhere flowers and leaves as seen in photo.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Hot glue gun, Cobalt Ranger Archival Ink pad, Peeled Paint Ranger Distress Ink pad, flower wire

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Flower basket measures - 4 1/2 x 41/2 x 4". To create a flower basket - die cut six side pieces and one base piece of White card using Treasured Heart Gift Box Die, then die cut matching pieces of Paper Collection using the same Treasured Heart Gift Box Die. Adhere Paper Collection pieces to the White Card pieces, then fold using a bone folder along the score lines and assemble all pieces together. Die cut six decorative squares of Luxe Gold Cardstock using Stairway Gardens Die, then adhere them to the each side of the basket using Dries Clear Adhesive with Metal Tip. Die cut six full hearts of Paper Collection and six decorative hearts of Luxe Gold Cardstock using Treasured Heart Gift Box Die, then stack and adhere them together. Adhere final pieces to the each rounded flap of the basket, then adhere each of the rounded flaps to the side of the basket using 3D foam and Hot glue gun. To create a basket handle - die cut five decorative double hearts of Luxe Gold Cardstock and five full double hearts of Paper Collection using Treasured Heart Gift Box Die. Connect the Gold double hearts together, then adhere the double Paper Collection hearts on the back using Dries Clear Adhesive with Metal Tip. Shape the final piece gently using your fingers, then adhere it to the base of the basket as shown.

Stamp the flower image of Small Wild Rose Cling Stamp Set and Large Wild Rose Cling Stamp Set with Cobalt Ranger Archival Ink onto the Art Foam paper and colour them in with Vivid Chartreuse and Manganese Blue Archival Inks using Daubers.Die cut the flowers with matching die of Small Wild Rose Die and Large Wild Rose Die, then shape them using Heat It Craft Tool. Assemble flowers using Deluxe Flower Shaping Kit and hot glue gun, then adhere the stamens in the center of each of the flowers.

Stamp leaves image of Oakberry Lane Blossoms Cling Stamp Set onto white cardstock with Peeled Paint Distress Ink and colour them in with Peeled Paint Distress Ink using Daubers. Die cut leaves with matching die from Oakberry Lane Blossoms then place them in 3D Blossoms Shaping Mold, spray them with water and run them through die cutting machine. Then leave them to dry completely.

Using a sponge, add Designer Dries Clear Adhesive to the flowers and leaves and sprinkle them with Rajni Chawla’s Crystal Clear Glitter. Adhere flowers and leaves to the flower basket using hot glue gun as desired.

Other Products: Prepared card base, white cardstock, hot glue, embossing ink, embossing powder, brush pen no. 507

For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.

Instructions: Prepared card base measures 5 7/8 x 5 7/8". Choose the patterned paper from Cottage Garden Paper Collection. Cut paper to 5 3/4 x 5 3/4". Using Fleur Border Basics Die, cut two decorative borders from a piece of white cardstock. Using the same dies cut two sides of decorative paper. Glue two pieces of decorative border and add to your card using Double Dots -3D Foam Circles. Using Eyelet Circle and Basics Small Die cut circle in white cardstock. Glue on your card.

Using embossing ink stamp the swans from Feathery Swan Cling Stamp Set on a piece of white cardstock, add embossing powder and heat set using heat gun. Die cut a frame using matching die from set and color it as you like. Add to your card.

Flowers: Stamp flowers from Purr-fect Posies Cling Stamp Set on a piece of Deluxe paper using Archival Vermillion ink (flowers) and Fern Green (leaves). Then color it using Archival Sunflower ink (flowers) and Archival Fern Green (leaves). Die cut it using matching die from Purr-fect Posies set. Use Deluxe Flower Shaping Kit for shaping your flowers. Glue it together using hot glue gun and hot glue. Add stamens from Pastel Bead- Medium. Leave to dry and add to your card. On the circle add drops using Nuvo Sweet Lilac Drops.

Other Products: Die cutting machine Cut’n’boss, heatgun, funnel tray, water mister, hot glue gun, hot glue, scissors, Stickles ranger Lime Green and waterfall, Stampin’ Write Bashful Bblue and Certainly Celery, cheesecloth, lace

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: The finished card measures 8 x 6 1/4". Cut the card base in a white card stock to 8 x 12 1/2" and score at 6 1/4" on the longer side. Fold to make an horizontal folding card. Cut a 3 3/4 x 6 1/8" piece of green paper from the Cottage Garden Collection and glue it to the card base. Then cut out another piece of pattern paper 3 5/16 x 5 9/16" and glue under this, a piece of white paper just a little bit larger. Glue it on the base card too with a 3D foam to give dimension to your card.

Stamp 2 wild aster spray flowers with the Leaf Green archival ink on white card stock. Cut it with the appropriate die. Made some shiny dots on it with the Stickles ranger Lime Green and Blue Waterfall.

Stamp 2 vines from the large Classic Petunia with the Leaf Green archival ink on white card stock. Cut it with the appropriate die. Color them with blue and green.

Stamp 3 big petals from the Large classic petunia onto the foam paper with blue ink. Color lightly the petals in the center on both sides. Put the 3 petals together with 8 stamens in the center. Heat the flowers with your heatgun and twist the petals with your fingers when they still hot. Fix them with glue gun. Do it twice to have 2 flowers.

Use the archival ink leaf green to stamp and color leaves. Die cut and use the mold to give them a nice shape.

Put cheesecloth and sewing thread in the middle of your card. Glue over it your vine and aster spray. Glue your flower over it. Put the leaves under your flowers. Put wire string, ribbon, and lace between your flowers.

Cut a sentiment from the paper and glue on the card, using 3D foam to give dimension.