Other Products: Glossy Accents. Purple flower pearls from Dress My craft, Acetate sheet,

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: The card base measures 6 inches by 6 inches. To make this, cut  white card stock 12 inches by 6 inches and score at 6 inches on the longer side. Fold to make a top folding card. Cut pattern paper from paper collection, a little smaller than the card base and adhere to the card front using clear glue.

Cut out a pocket from the pattern paper using the scalloped border from border die and adhere to the base of the mat layer, leaving the opening to insert tags.

Cut the decorative dies and the eyelet border dies from white card stock and adhere the decorative die cut on the top of the mat layer and adhere the border die cut matching with the pocket on the card front. Cut a doily die cut and adhere to the card front. Cut two from Furry friend die set. Cut out a small window from the first circle die cut. Stamp the round sentiment from the stamp set with black ink. Adhere a small piece of acetate sheet to cover the window from backside. Add the foam strip all around the window on the back. Lay this on the flat surface facing down. Add flower pearls and cover with the second circle piece. Adhere this shaker element on the doily die cut.

Stamp the flowers in purple and red ink from Buttons and Blooms collection. Stamp the image from the patchwork daisy collection using Library Green for leaves and purple and red ink for flowers. Sponge daubers can be used to color flowers. Cut with matching die. Shape the flowers on the flower shaping tool kit with groove tools. Add colored stamped images from the patchwork daisy collection around the shaker element. Add the images on the top of the card front. Add the flowers on them. Stamp and cut some buttons. Shape them and adhere in the flower centres with glossy accents. Apply glossy accents and glitter.

Cut two tags from the tags die set. Add the buttons on top and add the tags inside the pocket.

Other Products: white card stock, paper trimmer, white gel pen, assorted buttons, scissors, foam tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Create a card base from white card stock measuring 5" x 7". Next select the patterned papers you wish to use in your background. Die cut a curved eyelet edge onto one larger piece of paper using the Eyelet Border Basics Die. Next, measure out the approximate sizes you will need for the other two layering pieces, both will remain having straight edges.

Die cut an eyelet trim border piece from white card stock that coordinates with curve of the piece of patterned paper. Adhere it to the back of the patterned piece as a second eyelet layer using dries clear adhesive as shown.

Die cut the lace like accent piece from the Sweetheart Borders Die from white cardstock. Trim down to the size you wish to use as accent on background. Adhere to back of layering piece using a dries clear adhesive as shown.

Adhere your layering pieces to the card base as shown, beginning with the center most section so the other die cut accents overlap.

From white card stock, die cut the large frame from the Intricate Swirls Frame Die, and one banner from the Arrows and Banner Die. Using Ranger Archival Ink Pad - Jet Black, stamp sentiment found in the Cheerful Note Sentiments Cling Stamp Set. Using Stack and Store Dauber, ink all edges of banner using Ranger Archival Ink Pad - Deep Purple.

Using a dimensional foam or pop dots, adhere frame and sentiment banner to card front as shown.

Stamp one inking of each of the illustrations found in the Patchwork Daisy Border Cling Stamp Set, onto white card stock using Ranger Archival Ink - Deep Purple. Color leaves on all stamped images using Stack and Store Daubers and Ranger Archival Ink - Leaf Green. Color daisies on large border die cut using Stack and Store Daubers and Ranger Archival Ink - Forget-Me-Not. Color smaller daisy flourish flowers using Ranger Archival Ink - Deep Purple. Die cut all images using coordinating dies. For large daisy border embellishment, using a scissor, snip entire border free so you have a free standing embellishment. Shape all embellishments slightly using Deluxe Flower Shaping Kit.

Stamp one inking of the mid sized and smaller daisies found in the Buttons and Blooms Cling Stamp Set, onto white card stock using Ranger Archival Ink - Deep Purple. Color two smaller blossoms using Ranger Archival Ink - Buttercup, and one mid sized flower using Ranger Archival Ink - Cactus Flower. Die cut using coordinating dies, and shape slightly in the center using your Deluxe Flower Shaping Kit.

Adhere smaller daisy flourish to top of card front, and larger flourish to bottom. Adhere daisy border die overtop as shown. Layer small yellow daisy flowers over daisy images on top and bottom of border, and the larger pink flower in center.

Using a dries clear glue, apply glitter to all leaves and petals. Lastly, using a white gel pen, add stitching to straight background panel as shown

Other Products: Smooth White Cardstock, Zig Clean Clear Brush Markers, Glossy Accents, Twine, Rajni Chawla's Twinkling Spark.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: The ready top-fold card from smooth white cardstock measures, 7 1/2" by 6 1/4". The first layer is created using smooth white cardstock measuring 5 3/4" by 7". The right side of the card is scored horizontally, each time at 1/8 of an inch.

To create the top fancy panel of the card, cut 2 pieces of lace from white cardstock, keeping eyelet dies on both the edges of the fancy border. Cross the borders from the center and tightly glue the top and the bottom edge. Choose a teal color paper from the paper collection and cut it measuring 5" by 6 3/4". Glue the ready lace border on right side of the teal panel as shown. While the glue was wet, snip the teal paper keeping the cut little inside of the white fancy border edge. Layer the teal panel on the scored panel and further layer it on the ready card base.

Stamp 2 pieces of right daisies from Patchwork Daisy Cling Stamp Set and 2 large blooms from Buttons and Blooms Cling Stamp Set, using black archival ink. Cut the images using their coordinating dies. Paint the images using Zig Clean Clear Brush Markers, Also stamp, cut and paint 2 large buttons for the larger blooms. Add a glossy accent to the buttons for extra accent.

Once all the elements are ready, assemble the card as shown and complete it by adding sentiment tags from the paper collection. Also, add Twinkling Spark to add some shine to the final card.

Other Products: Cardstock White, ColorBox Ink (Candy, Dandelion, Violet, Pixie Mauve, Seaweed, Green Apple), Distress Oxide Ink (Broken China, Faded Jeans, Spiced Marmalade), Gems, Enamel Dots, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, Adhesive Dots Micro, Adhesive Dots Medium, E-Z Runner Grand, Dual Tip Glue Pen), Tonic Paper Distresser

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: White cardstock is the background 12 x12". Cut a piece of the blue patterned paper that is 12 x 8", mat the edges in white cardstock, and then add a narrow strip of the pink striped patterned paper. Adhere to the middle of the white cardstock. Cut a strip of green patterned paper that is 1.5 x 12" and adhere to the left hand side of the layout. Find and cut out the circle stripe strip, and adhere that near the bottom of the blue patterned paper section.

Find and cut out the flower bordered frame. I fussy cut out the inside edge. Cut your photo to fit behind the frame. Adhere the frame on top of the photo using 3D foam squares. Mat the framed photo in white cardstock and distress the edges. Adhere to the layout using crafty foam tape. Die cut 1 of the Arianna Lace image from white cardstock, and cut into pieces. Add a piece above and below the matted photo. Add gems to these pieces.

Die cut the bird cage image from white cardstock and adhere to the right hand side of the matted photo. Add gems. Find and cut out the purple bordered journal block, and adhere to the top and bottom of the green patterned strip using 3D foam squares. Find and cut out the "Everyday Moments" sentiment and adhere to the right of the matted photo using 3D foam squares.

Stamp and die cut 1 of the Leafy Accents large clusters using dark green ink (Seaweed). Add color using ink and daubers, light green ink (Green Apple). Shape the leaves using 3D Leafy Accents Shaping Mold. Stamp and die cut 1 Patchwork Daisy vine image onto white cardstock using dark green ink, and add color to the vine and leaves only using light green ink. Shape the leaves and adhere to the right of the matted photo just under the birdcage.

Stamp and die cut 1 set of the large Buttons & Blooms using dark purple ink (Violet). Stamp and die cut 2 sets of the medium Buttons & Blooms, 1 using yellow ink (Dandelion) and 1 using the same purple ink as before. Stamp and die cut 1 set of the small Buttons & Blooms using dark pink ink (Berrylicious). Add color to the flowers using ink and daubers. Pink (Candy), Purple (Pixie Mauve), Yellow (Dandelion). Stamp and die cut sets of buttons in the following colors: Orange (Spiced Marmalade), Teal (Broken China), Yellow (Dandelion) and Purple (Violet). Add color to the button using ink and daubers and the following colors: Pink (Candy), Teal (Broken China), Yellow (Dandelion), Purple (Pixie Mauve), Orange (Spiced Marmalade).

Shape the flowers using the 3D Floral Basics Shaping Mold. Assemble the flowers and add a button to the middle of each flower. Add liquid adhesive to each button and let dry. Add the flowers to the vine and to the left hand side of the matted photo. Add leaf pieces around the flowers.

Other Products: White card stock, purple card stock, pearls, buttons, floss, acetate, embossing folder (cuttlebug).

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Card size: 4 1/4 x 5 1/2". Cut white card stock 5 1/2 x 8 1/2" and fold in half to make a card base. Cut curved border on front of card only with the eyelet edge from eyelet Border Basics. Cut 2 pieces of decorative paper 4 1/4 x 5 1/2". Glue 1 to the inside of card and cut the second with the curved plain edge from the Eyelet border Basics die. Before gluing paper to the front, glue a piece of acetate to the front. Glue die cut piece of paper to the front of card on top of acetate leaving the white eyelet to show for a border. Cut a white panel for the left side of front, die cut with eyelet edge and also the inlay decorative curved die. Use an embossing folder on the plain part of white card stock. Instead of running it through a die cutting machine just use a hammer to hit only the portions you want a pattern on. Glue to left side of front and add pearls.

Stamp Patchwork Daisy Border and Patchwork Daisies using Leaf Green then sponge color with Chartreuse. Stamp Buttons and Blooms flowers using Magenta Hue, Forget Me Not and Majestic Violet inks. Die cut and sponge color. Stamp sentiment using Majestic Violet and die cut with oval then die cut larger oval from purple paper. Glue Daisy Border to front of card along decorative paper border. Glue sentiment to purple then to inside of card towards the left.

Glue the vine around oval cutting where necessary. Glue Buttons and Blooms flowers to border on front and vine inside. Thread buttons with floss then glue to the inside of flowers.

Other Products: White card stock; Memento Dye Ink Pad, Pear Tart; Ranger Archival Ink Pad, Pale Ochre; glossy accents; Stickles, Diamond; Wink of Stella, clear; seam binding; foam tape

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: For card base, cut a piece of white card stock 11" x 6", fold in half to create 5 1/2 x 6" side fold card. Cut a piece of green design paper, 5 1/4" x 5 3/4", add to card front. From purple design paper, cut a piece 5 1/8" x 2 1/2". Die cut one edge with the smaller Eyelet Border Basics Die. From a 5 1/8" x 2 1/2" piece of white card stock, die cut using the larger Eyelet Border Basics Die. Adhere the two pieces together. Cut the card panel from the design paper and add to the Eyelet Border piece. Add to card front. Add diamond Stickles around the purple paper. From white card stock, die cut the doily in the Butterfly Kisses Decorative Die set. Die cut the 2 1/2" circle from the Eyelet Circle & Basics Small die from white card stock. Stamp the sentiment on the right side of the circle with Jet Black. Sponge the edge with Pear Tart and then adhere to the doily. Add diamond Stickles around the edge. Add to the card.

Stamp the flowers and buttons on white card stock with Bamboo Leaves and Magenta Hue, sponge each with the same inks. Also stamp a set of buttons with Pale Ochre. Cut off the Magenta Hue flowers, shape with the Flower Shaping Essentials tools. Add the stamens to the 2 smallest flowers and a Pale Ochre button to the center of the larger flower. Add the green floral piece to the card and then add the flowers. Highlight with diamond Stickles and Wink of Stella. Add the seam binding bow to the flowers. Add the 3 buttons to the right side, adhering one with foam tape

Other Products: White, blue, yellow and rose colored cardstock, tiny buttons.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4. 

Instructions: Prepare a 5 x 7" white card base. On one end stamp the Patchwork Daisy border image in black ink, use the matching die and cut out. Color the flowers and leaves with the Sunflower, Emerald Green, Forget me not and Vibrant Fuchsia inks. Stamp the Buttons and Blooms flowers on the colored paper with black ink, cut out with the coordinating die, shape using the Flower shaping kit and adhere to the top of the flowers and add Prills to the center and glitter to the petals.

Cut a piece of the Patchwork Daisy paper 5 x 7", cut the side off using the Eyelet border basic die, and adhere to card.

Die cut the tag and corner pieces out with white cardstock, stamp the sentiment in Blue, add foam dots and adhere to card. Add tiny buttons to the tag. To complete the card, add matching paper to the inside as shown.

Other Products: Score board, die cutting machine, string, scissors, clear embossing powder, Purple Encore ink

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Card size is 4 1/4 x 5 3/4". Cut white cardstock to 8 1/2 x 5 3/4", score at 4 1/4. Cut turquoise designer paper to 4 1/4 x 5 3/4". Ink edges with Paradise Teal ink and adhere to card front. Cut striped designer paper 3 3/4 x 5 5/16", ink edges with Magenta Hue ink. Ink edges with Majestic Violet ink, adhere on card front using foam dots.

Using white cardstock die cut Eyelet border on the left and right side of cardstock to create a shape of your choice. Stamp stitched background using Encore Purple ink and sprinkle with clear embossing powder. Heat Set.

Stamp both swirling patchwork images using black ink, color with Pink Peony, Rose Madder, Buttercup, Sunflower, Vivid Chartreuse, Leaf Green, Olive inks and die cut with coordinating dies. Shape with Flower Shaping kit. Stamp buttons using black ink and die cut. Color with Pink Peony and Rose Madder inks. Die cut additional buttons and adhere together to make a thicker button. Cut small strips of string and glue on top of buttons to make it appear like thread is in the buttons. Apply Crystal Lacquer on buttons and allow to dry.

Using scissors to cut sentiment from paper, color with Majestic Violet ink and adhere onto card front using foam dots. Die cut arrow die from green designer paper, ink with Leaf Green ink. Adhere pieces as shown. Finally add Crystal glitter.

Other Products: Seam binding ribbon, twine, yellow marker

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a larger photo of this project. Create the gift bag using the pattern found here with lavender paper from the Patchwork Daisy Paper Collection. Cut out two of the Ornate Pocket Accents Die in white cardstock by combining the two large dies without the separating dies. Adhere one to each side of the gift bag as shown.

Stamp 2 of the left facing and 4 of the right facing Patchwork Daisy in black, sponge flowers with Sweet Plum, color centers with yellow marker and sponge leaves with Fern Green and cut out with corresponding dies. Adhere two layers together for dimension, add Crystal Clear glitter and adhere to bag on the Ornate Pocket Accents Die. The left-over flowers will be cut apart and used on the tag.

Stamp buttons from the Buttons and Blooms set in black, cut out with coordinating dies and sponge with Buttercup and Leaf Green inks. Cut out extra buttons with the Buttons and Blooms Die and glue multiple layers together to give the buttons a realistic thickness. Sponge the sides with ink and cover the buttons with 3D Crystal Lacquer. Adhere buttons to the flower centers and to the end of each handle on the bag.

Create a tag using the Ticket and Tags Die. Cut the larger tag in white cardstock for writing your greeting and cut the blue tag out of the paper collection, as well as the tag topper. Adhere the extra flowers created to the tag, a sentiment from the paper collection and a seam binding bow. Tie the tag to the bag handle with twine.

Other Products: White Cardstock, Hot Glue Gun, Dimensional Tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: My card size is 4 1/4 x 5 1/2". Make card base and cover the inside of the card with a piece of the paper collection. Also cut a strip of the same paper 1" wide to go on the front of the card. Cut out the decorative piece from the Ornamental Tags Dies and glue to the fold of the card and then lay the 1inch piece of paper over that and glue it down.

Stamp the card front with the Patchword Daisy Cling Stamp and run the card front and the Patchwork Daisy Border die through the Sizzix machine. Next color the greenery of the stamped image with the Dove Blender pen and ink.

Stamp the flowers and buttons using inks and cut out using the coordinating die. Shape the flowers and then glue the buttons to the centers of them and set aside to dry. Once dry glue to the curved front of the card. Locate a tag and cut out using the coordinating die and use dimensional tape to adhere to card front.

Other Products: White card, blackberry bliss cardstock, balmy blue cardstock & berry burst ink (stampin Up!), black ink, Plum twist Pixie powder, summer sky chalk cloud blending ink, clear embossing powder, transparent glitter, gems, wet glue, foam pads, coordinating yarn, black fine liner. Double sided tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Score a 15" x 7.5" piece of white card at 7.5" to create a square card base. Colour the edges using summer sky chalk cloud ink.

Cut a 7" square piece of blackberry bliss card stock and adhere onto the card base. Using the black fine liner mark "stitches" around the blue border on the card base.

Cut a 6.25" piece of paper from the pad and edge with berry burst ink, layer onto a 6.5" square piece of blue card and adhere these 2 layers onto the card base.

Cut a 4" x 3.75" piece of white card and spritz with water, sprinkle pixie powder over the card and add more water to create a shimmering background. When dry add blue chalk cloud ink to cover any white areas. Stamp the hand stitched background in black ink and mount the piece of card onto a slightly larger piece of balmy blue card. Adhere to the card base using foam pads.

Die cut the largest die from the botanic window set in blackberry bliss, then die cut the smallest die inside it to create the window. Die cut the middle die from the set using paper from the pad and adhere this to the back of the window using wet glue. Die cut a second window from the largest die and adhere this to the back of the window to give added strength to the piece. Add wet glue to the swirls of the window and cover in transparent glitter, tap off excess and allow to dry. Add gems to the centre of the small flowers of the window. Use foam pads to adhere the window to the stitched background.

Select and die cut the tags from the paper pad. Stamp the sentiment in black ink and cover in clear embossing powder, remove excess and heat to set. Edge with berry burst ink and tie a bow of yarn in each tag. Tuck under the window and secure with foam pads.

Stamp the floral swirls in berry burst ink on balmy blue card and on paper from the paper collection. Cover in clear embossing powder, remove excess and heat to set. Lightly shape the flowers and leaves then position onto the card with wet glue.

Other Products: White Cardstock, Purple Cardstock, Clear Drying glue, Ribbon, VersaMark ink, pencil colors, double sided tape

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Cut purple cardstock 12 x 7-1/2", score at 3", 7" and fold. Mat all the three flaps outside and inside using pattern paper from the paper collection, leaving 1/4 inch border.

Die cut white cardstock twice using Elegant Pocket Accents Die and mat with purple cardstock, adhere them to the sides of the outside flap with clear drying glue.

For gift card pocket - Cut pattern paper 2-1/2" x 7-1/4" and die cut using the slit die from the Decorative Pocket Accents Die set. Die cut white cardstock using the Decorative Pocket Accents Die and adhere it on top of pattern paper overlapping the slits. Next apply double sided tape to all the four sides of pattern paper and adhere on to the center flap. p> For the pocket on third flap cut white cardstock 3-1/2 x 5-1/2, score at 1/2 inch from three sides and die cut the upper part using Petite Pocket Accents Die. Mat with pattern paper. Apply doubled sided tape to the 1/2 inch space and adhere to the third flap. Die cut white cardstock using Petite Pocket Accents Die and adhere on the upper part of the pocket. For the tag die cut white cardstock using the largest die from the Album Tags and Accents Die and mat with pattern paper. Die cut white cardstock using the banner die from the Album Tags and Accents Die, sponge with Archival ink saffron and stamp with sentiment from the Just For You Sentiments Cling Stamp Set using Archival Ink Jet Black.

Stamp white cardstock with Patchwork Daisy Border Cling Stamp Set using Archival ink Jet Black, die cut using coordinating die and color with pencil colors.

For flowers stamp vellum sheets with Buttons and Blooms Cling Stamp Set using versa mark ink and heat emboss with Ranger's white embossing powder. Die cut the images using the coordinating die. Color the flower petals using Color box ink Concord. Shape the flowers using Groove Golf Tool. Apply Crystal Clear Glitter on flowers with clear dry glue.

Stamp white cardstock with Leafy Accents Cling Stamp Set using Archival ink - Library Green, die cut using coordinating die. Color the leaves using Archival ink - Olive and colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold.

Arrange the flowers and leaves on the outside flap as shown and finish off with sentiment banner.

Other Products: Hot Glue Gun, Sponge, Misti, Big Shot Plus, Scissor, Dimensional dots, VersaMark, WOW Sparkling Snow Embossing Glitter, WOW Royal Crush Embossing Glitter, Swarovski Arora Borealis crystals, ribbon from my stash, Crop-A-Dile

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to see a larger photo of this project. Tag is 6 x 5". Using the largest tag die from the Album Tags and Accent Die, cut through two pieces of white cardstock so you have two tags. Adhere these together using dries clear glue to form a strong base for the tag. Using the same die, cut two pieces of the Patchwork Daisy paper collection. Adhere one piece to the front of the white tag, ink the edges of the second piece and adhere to the back of the tag. Using the two largest dies, cut a border from white cardstock, sponge with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter. Set aside to dry.

Diecut vellum from the same die, stamp the border from the Patchwork Daisy Border Cling Stamp Set using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It tool. Color the flowers and leaves using Magenta Hue, Majestic Violet, Forget-Me-Not and Vivid Chartreuse Archival inks and Stack and Store Daubers. Diecut using the coordinating die, shape lightly using the Deluxe Flower Shaping kit. Stamp, color, diecut and shape the two flourishes from the same stamp set in the same manor and add a Swarovski crystal to each of the little flower centers on one of the flourishes. Apply dries clear adhesive to the edges of the vellum border diecut and adhere to the tag.

Using the Buttons and Blooms Cling Stamp set, stamp the flowers and the buttons on vellum using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It tool. Color the flowers and buttons using Magenta Hue, Majestic Violet, Forget-Me-Not and Vivid Chartreuse Archival inks and Stack and Store Daubers. Diecut using the coordinating die and shape using the groove golf tool set. See Emma Lou's video here to learn how to shape them. Adhere two petals together, making sure to offset, to create the flowers. Using a dimensional dot, add buttons to the flower centers. Adhere the flowers to the border as shown. Adhere the floral flourish with the crystals to the tag as shown. Cut apart the second floral flourish and a small flower to the border and some leaves at the top.

Stamp the arrow from the Hand-stitched Accents Cling Stamp Set on vellum using VersaMark, sprinkle with WOW Royal Crush Embossing Glitter and heat set using the Heat It tool. Stamp the sentiment in the same manner, heat set and diecut the arrow using the coordinating die. Shape slightly with your fingers and adhere to the tag as shown. Using a Crop-A-Dile make a hole in the tag, add an eyelet and a ribbon.

Die cut a pocket from white cardstock using the Ornate Borders and Pockets Die, sponge with dries clear adhesive and completely cover with Crystal Ultrafine Transparent Glitter and when dry, adhere to the back of the tag at the bottom. Adhere a section of the floral flourish to the top of the tag as shown. Diecut a tag from the paper collection using the Tickets and Tags Die, sponge the edges, Stamp the sentiment using Majestic Violet ink and add glitter to the design. Diecut a mat from white cardstock using the same die set and adhere the tag to the mat. Punch a hole in the top and add ribbon.

Hand write a message on the back of the small tag and place it in the pocket.

Other Products: Silver Pin, Lilac Ribbon, clasp, Hat Pattern, Cutting machine, glue gun.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Click here to view a larger photo of this project. Find the cut file for the hat here. Using white cardstock and Rhubarb Stalk ink, stamp the 1 large 1 medium and 1 small Oakberry Lane Blossoms. Using Majestic Violet ink, stamp 3 large, 1 medium and 1 small Oakberry Lane Blossoms. Die cut with coordinating dies. Color the center of the flowers with Buttercup ink and the petals with Majestic Violet ink. Place blossoms in the 3D mold, spray them lightly with water and place the lid on, run through the machine. Layer 2 blossoms together of the large and medium blossoms, creating 3 layered flowers. Make a hole in the center of the flowers and pull the stamens through. On the small flowers use only 1 bead stamen in the center of each flower.

Stamp the small flower flourish from the Patchwork Daisy Border die with Tuxedo Black ink on white cardstock, color the flowers with Majestic Violet and the leaves with Leaf Green, die cut with the connected die. Cut the hat with paper from the paper Collection using your electronic die cutting machine and this https://www.silhouettedesignstore.com/view-shape/67665 cut file, reduce the size till you like it. Assemble the hat. Then take the ribbon and the clasp and place along the bottom of the hat and create a nice bow.

Cut the small flower flourish in half, and arrange flowers as shown. Finally add the silver pin.

Other Products: White cardstock. Big Shot Machine.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

Instructions: Card size 6" x 6" (final size). Take pattern paper from the Patchwork Daisy Paper Collection and tear the edges and adhere it to the card base. Cut two Petite Pocket Accents Die each on white cardstock and adhere it on card as seen on the picture. Add crystal clear glitter.

Next cut with die Delicate Eyelet Edging on the left and right side and a panel will be created as shown and adhere it with foam tape and then add sentiment from Just For You Cling Stamp set with archival ink-jet black.

Stamp two set of Patchwork Daisy on white cardstock with archival ink-jet black and cut them with coordinating die and color them with archival ink-leaf green and rose madder and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive. Arrange them as shown.

Stamp one bloom from Buttons and bloom cling stamp with archival ink-jet black and cut it with coordinating die and color it with archival ink-sunflower, rose madder, cactus flower and add button stamp at the centre of the bloom with foam tape and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive. Add this Bloom shown.

Other Products: White Cardstock, White Ribbon, Grape Jelly Memento Ink, Sap Green Archival Ink, Hot Glue Gun

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a larger photo of this project. This card was inspired by Liz Gaze and the video she shared here. My card size is 4 x 6". Fold a piece of 8 1/2 x 11" cardstock in half and tape the tag die so it is resting with cutting blade just over the fold. When cut out this will make the card front and back together. Cut a piece of the paper collection using the smaller tag die and edge with ink. Glue down onto the front of the card.

Cut out the corner pocket die and sponge adhesive onto it and dip into the glitter. Allow to dry then glue to the bottom of the card front.

Stamp the leaves with Olive Green Stazon ink and then cut out using the coordinating die. Using the daubers add color to the leaves then place them into the Leafy Accents Mold and spritz with water. Run through the Vagabond 2 and then turn out to dry.

Stamp the flower petals with Grape Jelly ink and cut out using the coordinating die. Using the daubers, add color to the petals (Sap Green in the centers and Grape Jelly to the outer edges). Place the petals onto the mold, spritz with water and run through the Vagabond 2. Turn the petals out and allow to dry. Once dry, glue two together to form flower and add Prills to the centers. Allow to dry. Once dry, decide on placement of leaves and flowers and glue using the hot glue gun.

Using the Ticket and Tags die cut out small tags from the paper collection and tie ribbon through the holes. Slip the tags down into the corner pocket on the card front and it is ready to go.

Other Products: ribbon, pearls, white card stock, yellow card stock, dimensionals

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 5 x 7" from yellow Cardstock. Cut from white card stock: Eyelet Heart and plain edge heart for a frame, Decorative Oval, Intricate Swirl Frame Die and Ornamental Tag for sentiment. Glue frame to yellow folded card. Glue Decorative Oval to back of Heart frame and trim off excess. Pop heart up and place toward top of the frame. Set card base aside while you work on the flowers and leaves.

Stamp flower blossoms from the Arianna Collection using Vibrant Fuchsia then sponge with Buttercup in the centers and Vibrant Fuchsia on the tips, die cut and run through the Die cut machine using the 3D Basic Florals mold after misting with water. Take them out of the mold and continue pleating the tips with your fingers while still moist. Punch them down in the center with stylist tool (Deluxe Flower Shaping Kit) and let dry completely before the next step.

While drying, stamp Leafy Accent leaves with Fern Green and sponge with Vibrant Fuchsia and Leaf Green then die cut and run through machine with 3D Leafy Accents Shaping Mold. Now put flowers together by gluing 2 the same size as the base and then one smaller. Die cut stamen (Arianna die set) from Vellum and use your stylist in the centers to make the stamen stand up then add yellow Nuvo to each end. Let dry and glue to the center of flowers. Pierce center of flower with piercing tool and add a yellow beaded stamen. Glue the stamen to secure and when dry, cut off the extra wire on the back of flower. (Small flowers only have 2 layers, both small.

Glue leaves and flowers to the left side and bottom of the heart. Stamp the sentiment to the white label that was die cut using Vibrant Fuchsia ink and then glue each end to the heart frame. To finish, add a small fuchsia ribbon bow to the left bottom corner and pearls to each corner of the white frame. Add smaller pearls to the cross sections of the Decorative Oval inside heart.

Other Products: White cardstock, micro pearls, satin white cord, half cut pearls, vellum paper, VersaMark

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Ready top fold card measures 6" x 8.5" To prepare mats choose a pattern paper from the designer paper collection and cut a piece measures 5.75" x 7.75". Cut another piece of designer paper which is 1/16" inch smaller than the first one. Mat the paper on the ready card base. Die cut border from white cardstock using the Classic Border Basics die and adhere as shown. 

Stamp hand stitched background on vellum paper using VersaMark and heat emboss it with white embossing powder. Cut a frame from the white cardstock using hand stitched accents die. Glue the frame on the vellum paper. Also glue a piece of pattern paper on the backside of the vellum paper. Glue this frame on the ready card base as shown. Die cut the fan from white cardstock using the Frame a Card Leafy Borders die and adhere to the bottom right of the frame. Stamp a butterfly on vellum paper using VersaMark and heat embossit with white embossing powder and cut with coordinating die. Color the butterfly using cactus flower ink and glue it as shown.

Stamp blazing poppy flower on handmade paper using Red geranium ink and cut with coordinating die. Color the flowers using acrylic paints. Stamp leafy accents leaves and Rain Boots and Blossoms leaves on the flower making paper using olive green archival. Paint the leaves with leaf green archival. Shape leafy accents leaves using mold and rain boots and blossoms leaves using ball tool.

Arrange the flowers and leaves on one side of the frame and glue it using hot melted glue. Tie some bows using white satin cord and glue it. Stamp a sentiment using red geranium ink on white cardstock layer it on the pattern paper and glue it on the card. For the finished looked apply soft matte gel on the flowers and dust with glitter, also apply glue near the frame and flowers and add micro pearls.

Other Products: Zazz: Green, Pink Glitter Glue, Glue Gun, Arteza Watercolor Pens, Langton Watercolor Paper, Fabrico Pens

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take one of the sheets from the circle layered card and the sheet from Patchwork Daisy set that has the 4 - 6 x 6" panels and cut. Cover your circle layered card sheet and take your circle diecut and cut. Now cover the opening with the clear cardstock sealing your stamped image inside the top and bottom layers. 

Now stamp and diecut your cardinals from the Holly Berry set with Stazon black ink. Let set for a minute then color with Arteza pens.

To create your flowers stamp and diecut 10 blossoms from the Oakberry lane set from the sheet of Patchwork Daisy paper. To shape your blossoms,  place them in your 3D mold. Now to add some extra color use the Imagine Fabrico pens in pink with a touch of some pink glitter to really bring your flower alive.

Layer the blossoms 2 to a bunch and use your piercing tool to pierce the center and add your stamens. Stamp and diecut your leaves from a sheet of green paper from the collection place in your mold to shape and add to your blossoms. Add a touch of glitter to your leaves to add some sparkle.

Other Products: White card for stamping/die cutting, Copic YG63 (leaves), Copic R27 (berries), Bazzill Maraschino, Bazzill White, Red Ribbon, Distress Glitter Rock Candy, Glossy Accents, Nuvo Glitter Pen,

See how to create elegant Christmas cards here. 

See how to create Christmas cards in 30 minutes or less here. 

Instructions: To see more step by step photos, click on my name at the bottom of my instructions and head over to my blog. Using your red cardstock, cut 2 base cards 5 12/16" x 12". Using a bone folder on piece 1, bone fold at the 7 5/16" and fold. On your second piece bone fold at 3 4/16" and fold and again at 3 4/16" and fold to create front step. Join the two pieces together in the middle to make the middle section equal 7 5/16".

Using white cardstock cut 2 mats 5 1/2" x 7 1/8". Cut 2 mats 5 1/2" x 3". Using your Festive Holiday Paper Collection, cut 2 mats 5 5/16'" x 7" and 2 mats 5 5/16" x 5 3/4".

Using white cardstock cut 2 die cuts using your festive Holiday die. Using white cardstock cut 1 die cut using your Window Box Elements die.

Using your Festive Holiday & Cardinal stamp, stamp 3 of each of the holly sprays and cut with coordinating dies. Color you Berries using either your R27 Copic pen. Color your leaves using a YG63 Copic pen. Shape using your Deluxe Shaping Tool Kit.

Using white cardstock cut 2 mats, 3 x 2 3/4" and 2 5/16" x 2" (cut a matching mat for the smaller white mat using your patterned cardstock 2 1/2" x 1 3/4"), and using your Festive Holiday Stamp set, stamp your "with love at Christmas time" on the bigger mat and the "For you at Christmas" on the smaller mat. Using 3d adhesive adhere your "For you at Christmas" sentiment to the matching patterned mat.

Using your off cut from your patterned paper (the white decorative fence panel) trim to 5 5/16" wide and fussy cut around the decorative fence panel. Using a second piece of cardstock from the paper collection fussy cut out the birdhouse.

On panel 1 adhere your white decorative strip to the bottom of the card and then adhere your holly sprays one to the left and one to the right and adhere your sentiment over the top. Tie a bow out of red ribbon and adhere to the top of the sentiment and adhere a holly spray in the center of the ribbon.

Using your Festive Holiday die cuts slide your "with love at Christmas" sentiment in between the two and adhere in place. Adhere 1 holly spray to the top center and adhere a red bow and then adhere another holly spray to the ribbon center. Adhere another holly spray to the bottom. Using 3d adhesive adhere to the top left of panel 3. Using 3d adhesive adhere your fussy cut bird house.

On panel 4 adhere your fussy cut decorative fence panel and adhere a holly spray in the bottom right on the fence line.

Using a Wink of Nuvo glitter brush pen highlight your holly leaves and your birdhouse. Apply glossy accents to the berries. Apply dries clear glue to your birdhouse and glitter with a glitter of choice to create a snow effect.

Other Products: Christmas assorted snow Irridescent/silver

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Cut O Holy Night Paper Collection and white cardstock using tag die from Album Tags and Accents Die using both sizes. Large adhere to white paper and the two others on both sides of tag. Cut one tag using smaller. Place on tag using 3d foam tape. Cut swirl Noel Ornament Die from white glitter paper and place under sentiment layer. Cut out sentiment using Silent Night Scroll Die white glitter paper and collection paper as shown and place using 3d tape.

To create Poinsettia & Holly Clusters, stamp three times different sizes and cut using the coordinating dies. Color with red and green pigment ink using sponge. Sprinkle water on and place in the Poinsettia Shaping Mold. Wait to dry. Add a little hot glue to the underside of the flower to adhere. Using paint brush paint ready flower with Designer Dries Clear Adhesive and sprinkle Crystal Ultrafine Transparent Glitter

To create the pine needles, stamp Snowy Pine Village Cling Stamp and Silent Night Scroll Die (to place under each flower) with Ranger Archival Ink Pad - Coffee, and color using StazOn Ink Pad - Olive Green and cut using the coordinating dies. Using paint brush, paint with Designer Dries Clear Adhesive and sprinkle with glitter.

Arrange flowers and leaves as shown. Add snow.

Other Products: Colored pencils, white sparkle paper

For more tips on creating with the Snow Kissed collection, watch the tutorial at https://youtu.be/Wu5Z81llDWE.

Instructions: Cut a 5 x 7" card base in white card stock. Cut blue designer paper from the Merry and Bright Paper Collection to fit card base. Cut the large frame die from the Eyelet Lace Frames Die in white card stock. Cut snowflake blue piece from same paper pad to fit inside frame, cut a piece of white sparkle paper with the Fleur Border Basics Die to make a snowy hill. Adhere all to card base

Stamp and sponge the medium and small trees from the Snow Kissed Spruce set in Olive, cut out with corresponding dies, and add Frosting Powder. Heat emboss snowflakes from the Snow Kissed Spruce on blue designer paper in white embossing powder and fussy cut them out.

Stamp the sleigh ride from the Snow Kissed Spruce set in Black and color with colored markers, cut out with circle die. Cut out the lacey circle from the Butterfly Kisses Decorative Die and adhere sleigh ride on top. Adhere trees, snowflakes and sleigh as shown.

ther Products: White cardstock. Distress ink-peeled paint, broken china, chipped sapphire. Mini mister.

For more tips on creating with the Snow Kissed collection, watch the tutorial at https://youtu.be/Wu5Z81llDWE.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Card size 6"x 6" (final size). Create background with distress ink-peeled paint, broken china, chipped sapphire and mist water with mini mister and then heat it with heat it craft tool. Stamp snowflakes randomly with archival ink-manganese blue as seen on the picture.

Cut two Decorative Pocket Accents Die on white cardstock and adhere it on card as shown.

Add plain panel with distress edges on top of the Decorative Pocket Accents Die with foam tape to give some dimension as shown.

Stamp trees from Snow kissed Spruce cling stamp set with archival ink-library green and then cut them with coordinating die and color them with archival ink-leaf green and sprinkle frosting powder and heat them and arrange them as shown, using foam tape.

Cut one ornamental die on white cardstock and distress the edges and add sentiment from Celebrate love Sentiments, as shown.

Other Products: Creative Expressions Watercolour paper, Paper distresser, Windsor and Newton Artist Quality Paints Permanent Rose, Schmincke Watercolour Paints French Ultramarine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut a piece of white cardstock 12" x 6", score at 6" along the long side and fold to create a base card of 6" x 6". Cut a piece of green patterned paper 6" x 6", distress the edges and adhere to the front of the base card. Cut a piece of buttoned patterned paper 5 3/4" x 4 3/4" and using the plain edge from the HCD1-7210 Eyelet Border Die set die cut the apertures as shown. Cut two borders using the eyelet edge and the patterned die from white cardstock and adhere to the previously cut pieces as shown. Distress the edges and adhere to the front of the card with foam tape.

Stamp the pocket image from HCPC-3850 Patchwork Pocket & Patterns Stamp set in Deep Purple ink on watercolour paper and colour with a purplish mix of the two watercolours before die cutting with the coordinating die. Adhere to the left of the card as shown. Stamp the arrow image from the HCPC-3851 Handstitched Accents Stamp set in Deep Purple ink on watercolour paper. Then stamp the Thinking of You sentiment from the HCPC-3851 Handstitched Accents Stamp set inside the arrow image. Colour with watercolour paint and die cut with the coordinating die. Adhere the arrow to the right of the pocket as shown.

Stamp the images from the HCPC-3853 Patchwork Daisy Border Stamp in Jet Black ink on watercolour paper. Colour with the Zig Clean Colour Brush markers and die cut with coordinating dies. Shape and add Crystal Clear glitter to the images with Dries Clear glue on a damp sponge, and adhere over the pocket and cascading over the arrow to the right of the card.

Stamp the flower images from the HCPC-3859 Buttons and Bloom Stamp set on the Super White cardstock in a variety of colours - Deep Purple, Forget-Me-Knot, and Magenta Hue. Colour the pink flowers lightly with Magenta Hue, blue flowers with French Ultramarine and the purple flowers with French Ultramarine inks and die cut with the coordinating dies. Shape with the Deluxe Flower Shaping kit, add Crystal Clear glitter to the flowers with Dries Clear glue on a damp sponge and then adhere over the leaves as shown.

Stamp the button images from the HCPC-3859 Buttons and Bloom Stamp set on white cardstock cardstock in a variety of colours - Magenta Hue and Forget-Me-Knot inks. Stamp more button images to from the ... in Jet Black ink on water colour paper. Colour the pink buttons lightly with Magenta Hue and the blue buttons with French Ultramarine inks, and the buttons on water colour paper with Zig Clean Colour Brush markers. and die cut with the coordinating dies. Adhere the buttons to the centres of the flowers - the pink buttons on the light blue flowers, the blue buttons on the pink flowers and the green buttons to the purple and blue flowers as shown.

Other Products: White cardstock, handmade flower making paper, zig markers, glitter, white satin cord, silver embossing powder, Versamark, Archival Sap Green

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Click here to view a photo of the template. Ready side fold card measures 7" x 7". To prepare mat, choose a pattern paper from the designer paper collection and cut a piece measuring 6.5" x 6.5 . Layer it on the white cardstock which is 1/16" of an inch bigger. Choose another pattern paper from the same designer paper collection and cut a piece measuring 6.75" x 6.75". Layer it on the ready card base. Cut a border from the white card stock and glue it on the right side of the card. Cut a piece of white cardstock to create a book using book template. Also cut a pattern paper in book template which is 1/16" of an inch smaller than the first one. Cut one more book template from the white card stock and stamp sentiment using VersaMark on it. Heat emboss the sentiment using silver embossing powder.

Layer all the book template and stick some baby pink stones as shown. Cut two decorative borders from the baby pink card stock and apply glitter on it. Glue the book and borders on the card base as shown. Stamp some sun kissed flowers using magenta hue ink on the handmade paper and cut with coordinating dies. Paint the flowers with the same ink and shape using groove tool.

Stamp leaves from leafy accents stamp on the flower making paper using olive green ink and cut with coordinating die. Paint the leaves using leaf green archival and shape them using shaping mold. Stamp some leaves from the garden's edge coneflower stamp using black archival on water color paper. Cut with coordinating die and color using zig markers. Arrange flowers and leaves with some extra stamens as shown.

Tie bows using white satin cord and glue them. For the finished look, apply glitter on the flowers using glue that dries clear.