Blog Menu

Debuting the Patchwork Daisy Collection

Print Blog Save This Post to My Library


Hi Friends,

How are you on this beautiful November Wednesday morning? Have you been one of those gals that has seen sneak peeks and left comments, emails, or phone calls telling us how eager and excited you are to create with the Patchwork Daisy Collection! Reminisce of days gone by when laughter filled quilting bees were a treasured outing filled with chatter, decadent dainties and a great sense of accomplishment at the end of the day!

Special Savings: The Patchwork Daisy I Want It All has a 10% discount, only available until November 14th or while supplies last! Your new collection will arrive packaged in a transparent zipper bag with hot pink trim, great for keeping organized and a FREE full color instruction inspiration sheet included in every I Want It All! Start your crafting with the Patchwork Daisy Collection quickly and easily with this step by step inspiration sheet and be inspired to create beautiful projects your friends and family will love.Get yours today to ensure that you don't miss out on this special savings!

Our Crafters Say:
"This is wonderful. Paper is so cheerful and uplifting. The quilt paper looks like material. Will have fun with this. Can't wait Love love Heartfelt Creations. Crafting has become 100 % better and more enjoyable because my projects have become so much better. Thank you so so much." - Mary Halgrim

"WOW Amazing !! I must admit I was a little on the fence when I read the sneak peak title "Patchwork Daisy" collection. But after seeing beautiful papers ,dies and stamps. Then the video with all the inspirational ideas OMG! Heartfelt creations family you have done it again, and again." ~Sirenity Sole

The design team members are showcasing many different ways to use the Patchwork Daisy Collection along with a video to learn the EZ tips and techniques to create beautiful shaped cards for all your paper-crafted projects. Happy Crafting, Emma Lou P.S.

Are you a Platinum member? If not, find out how you can SAVE an extra 20% on all your purchases here: http://hcgo.co/Platinum



Creative Inspiration of the Week

Daisies for My Friend

Daisies for My Friend
Products Used
Hydra Sponges, RLHS100
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Clear Cardstock 8.5 x 11, GBKK811B1
3-D Crystal Lacquer, 3D1844
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Stack and Store Daubers-Pack of 30, HCDA2-450
Circle Basics Large Die, HCD1-7155
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Sky Blue, RACP656
Ranger Archival Ink Pad - Garden Patina, RACP992
Just For You Sentiments Cling Stamp Set, HCPC-3845
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: White cardstock, scissors, paper trimmer, diecutting machine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut white cardstock to 12 x 6" size, score and fold at 3 and 9". Stamp the daisy border from HCPC-3853 Patchwork Daisy Border set in Sky Blue Archival ink onto front flaps of card as shown, making sure to have the solid wavy line of borders facing the edges. Use the coordinating die to diecut the borders. Use from the HCD1-7210 Eyelet Border Basics to diecut 2 coordinating decorative borders. Stamp the background from HCPC-3854 Hand-stitched Background set in Vivid Chartreuse ink onto both sides of card. Also, randomly stamp the circle sentiment from HCPC-3845 Just For You Sentiments in Sky Blue ink across stitched pattern. Cut a 6 x 6 " panel from within the paper collection to 5 3/4 x 5 3/4 " size. Sponge edges of panel with Sky Blue ink and attach to the inside of card base. Attach decorative eyelet borders alongside coordinating daisy borders and trim off excess edges.

Stamp 2 medium and 4 small button flowers from HCPC-3849 Buttons and Blooms Cling Stamp Set in Sky Blue ink onto white cardstock and diecut with coordinating dies. Stamp the set of buttons 4x in Garden Patina ink onto white cardstock and diecut with coordinating die. Stamp the circle sentiment 2x from HCPC-3845 Just For You Sentiments set onto white cardstock in the same color ink. Diecut the sentiments by pairing the 2nd and 3rd smallest die from the HCD1-7155 Circle Basics Large Die set. Stamp the 2 small sentiments shown, in same color ink and diecut with the 3rd smallest circle die. Using the same die, cut another 2 circles from white cardstock and 2 from clear cardstock.

Use the Stack and Store daubers along with the following inks to color. Use the Sky Blue ink over the border daisies and daisy petals. Use Vivid Chartreuse on the leaves and buttons. Sponge the inner and outer edges of 2 sentiment circle borders with the Garden Patina ink.

Use the stylus from the HCST1-401 Deluxe Flower shaping kit to shape the daisies, leaves and buttons. Layer daisies onto both daisy borders and place buttons in the centers. Layer sentiment circle borders onto clear cardstock circles, then onto sentiment circles, and finally onto the extra cardstock circle for dimension. Attach both onto card as pictured.

Apply some Dries Clear glue onto yellow hydra sponge, dab over decorative borders and sprinkle with Crystal glitter. Use fine lines of Dries clear glue along with Crystal Glitter over daisies, leaves and rest of card as desired. Add some Crystal Lacquer to the button centers of daisies and let dry.

Created by: Emma Lou Beechy

Print Project

Double Daisy Wishes

Double Daisy Wishes
Products Used
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Stack and Store Daubers-Pack of 30, HCDA2-450
Winter's Eve Paper Collection, HCDP1-281
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Pink Peony, RACP649
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Arrows and Banner Die, HCD1-7204
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: Ivory cardstock, dimensional adhesive, scissors, paper trimmer, diecutting machine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut ivory cardstock to 10 x 7" size, score and fold at 5". Cut a light green background paper from the Winter's Eve collection to 4 7/8" x 6 7/8" size and attach to card base. Cut an ivory piece of cardstock to 4 5/8" x 6 1/2" size. Stamp the daisy border from HCPC-3853 Patchwork Daisy Border set 2x in Lulu Lavender ink diagonally onto ivory cardstock, making sure to have the solid wavy line of borders facing inwards towards each other. Use the coordinating die to diecut the borders. Use from the HCD1-7210 Eyelet Border Basics to diecut 2 coordinating decorative borders from ivory cardstock. Stamp the background from HCPC-3854 Hand-stitched Background set in Vivid Chartreuse ink onto both sides of daisy borders.

Stamp 2 medium and 4 small button flowers from HCPC-3849 Buttons and Blooms Cling Stamp Set in Lulu Lavender ink onto ivory cardstock and diecut with coordinating dies. Stamp the set of buttons 4x in Forget-Me-Not ink onto ivory cardstock and diecut with coordinating die. Stamp the Best Wishes sentiment in Magenta Hue onto ivory cardstock and diecut with arrow from HCD1-7204 Arrows and Banner Die set.

Use the Stack and Store daubers along with the following inks to color. Use the Pink Peony ink over the border daisies, daisy petals and buttons. Use Vivid Chartreuse on the leaves and edges of daisy borders. Use the Pink Peony and Vivid Chartreuse on various stitched blocks of background pattern. Sponge the edges of arrow sentiment with Pink Peony ink.

Use the stylus from the HCST1-401 Deluxe Flower shaping kit to shape the daisies, leaves and buttons. Layer daisies onto both daisy borders and place buttons in the centers. Layer arrow on top and underneath left side of daisy panel. Use dimensional adhesive to attach decorative eyelet borders underneath and alongside coordinating daisy borders and trim off excess edges. Use dimensional adhesive to attach daisy panels onto card as pictured.

Add some Crystal Lacquer to the button centers of daisies and colored block background patterns. Use fine lines of Dries clear glue along with Crystal Glitter over daisies, leaves and rest of card as desired.

Created by: Emma Lou Beechy

Print Project

Patchwork Border Pocket

Patchwork Border Pocket
Products Used
Embossing Tinsel - Bridal, RPEJ446
Hydra Sponges, RLHS100
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
ColorBox Pigment Ink Pad - Frost White, CB80
Scor-Pal Measuring & Scoring Board, 173842
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Heat It Craft Tool, RAHT
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Cactus Flower, RACP985
Just For You Sentiments Cling Stamp Set, HCPC-3845
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: White cardstock, Brilliance Graphite Black ink, hole puncher, clear embossing powder, dimensional adhesive, white seam binding ribbon, scissors, paper trimmer, diecutting machine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut white cardstock to 8 x 6" size, score and fold at 4". Use the 2nd largest die from HCD1-7202 Album Tags and Accents Die to cut a tag card base from the folded cardstock. Be sure to extend the left cut edge of die right next to the folded edge, instead of on top, to keep the card base intact. Stamp the daisy border from HCPC-3853 Patchwork Daisy Border Cling Stamp Set in Cactus Flower ink onto the front of tag card base and diecut with coordinating die. Stamp sentiment from HCPC-3845 Just For You Sentiments Cling Stamp Set in same ink onto card as pictured. Stamp the stitched background from HCPC-3854 Hand-stitched Background Cling Stamp Set in Vivid Chartreuse ink onto the card as shown. Sponge top, bottom and left edge of tag with Cactus Flower ink as pictured.

Diecut 2nd largest tag from stitched teal 6 x 6" panel within the paper collection. Use from the same die set to diecut largest coordinating tag from white cardstock. Use the 2nd largest tag from the HCD1-7201 Ticket and Tags Die to cut a tag from 6 x 6" ombre panel within the paper collection. Diecut a white corner accent for ombre tag. Stamp a sentiment onto tag in Cactus Flower ink. Also diecut 3 small tag rings from white cardstock. Combine the eyelet and fleur border from the HCD1-7210 Eyelet Border Basics Die and diecut border from white cardstock to coordinate along the edge of daisy border of card. Sponge right edge of border lightly with Vivid Chartreuse ink. Lightly sponge edges of both teal and ombre tags with Forget-me-not ink.

Stamp the medium and small button flowers from HCPC-3849 Buttons and Blooms Cling Stamp Set in Frost White ink onto white cardstock, heat emboss in Bridal embossing powder and diecut with coordinating die. Stamp daisy flourish from HCPC-3853 Patchwork Daisy Border Cling Stamp Set in Graphite Black ink, heat emboss with clear embossing powder and diecut with coordinating die.

Use the Stack and Store daubers to color the images. For the daisy border use Cactus Flower on the daisies and Vivid Chartreuse on the leaves and edge of border. Use Cactus Flower on the center of 1 medium and small daisy and Vivid Chartreuse on the edges. Use Forget-Me-Not on the center of a small daisy and Cactus Flower on the edges. For the daisy flourish use Forget-Me-Not, Cactus Flower and Vivid Chartreuse ink.

Use the stylus from the HCST1-401 Deluxe Flower shaping kit to shape the flowers and leaves. Next adhere white eyelet and fleur border underneath and alongside daisy border of card base and trim off excess edges. Then attach teal tag underneath, using glue and dimensional adhesive only along the outside edges, to create a pocket opening. Punch a hole on the top of tag card and ombre tag, then attach tag rings around holes for extra strength. Thread white seam binding ribbon through both tag holes and attach. Attach corner accent to ombre tag. Attach flowers, leaves and place tag into pocket of card. Layer card onto larger white tag. Use a sponge to dab some Designer Dries Clear glue on card and sprinkle with Rajni Chawla's Crystal Clear powder.

Created by: Ellen Miller

Print Project

Pleasant Remembrances

Pleasant Remembrances
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Hydra Sponges, RLHS100
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 6, HCDA1-449
Rajni Chawla's Crystal Clear, PGM15015
Eyelet Circle & Basics Small Die, HCD1-7154
Circle Basics Large Die, HCD1-7155
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Paradise Teal, RACP500
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Fern Green, RACP962
Just For You Sentiments Cling Stamp Set, HCPC-3845
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Die, HCD1-7208

Other Products: Die cutting machine

For more inspiration with the Patchwork Daisy collection watch this video here https://youtu.be/v5BEpcSlmoI.

Instructions: Create a 7 x 5" side fold card using white cardstock.

From the paper pad cut a piece of paper 6 3/4 x 4 3/4" and adhere to the card front. Apply adhesive with the sponge over the flower and cover with the crystal clear powder. Shake off any excess.

Cut a piece of blue paper from the paper pad 5 1/2 x 4 3/4" and die cut using the Eyelet Border Die ink the die cut edge with Paradise Teal ink and adhere to the card.

Using white card die cut the wider Eyelet Border Die in the same direction as the previous die cut. Apply adhesive and cover with Crystal Powder. Leave to one side to dry.

Cut a piece of pink paper from the paper pad 4 1/4 x 4 3/4" and die cut using the Eyelet Border Die. Adhere the white glittered die cut to the bottom of the paper and then adhere to the card with foam pads.

Using white card die cut the Eyelet Circle and the largest of the straight edged dies from the Eyelet Circle and Basics Die set. Glitter the edge of the Eyelet circle die cut. Stamp the sentiment onto the side of the straight edges die cut circle in black ink. Die cut the largest of the Circle Basics Die set in blue paper. Layer the circles and adhere to the card.

Stamp the Patchwork Daisy Cling Stamp twice in Fern Green ink, stamp again once in Paradise Teal and Vibrant Fuchsia. Colour and die cut all images just colouring the flowers on the blue and pink images. Colour the centre of the flowers with Sunflower ink and edges in corresponding colours to the stamped image. Colour the two green Patchwork Daisy die cuts in Leaf Green. Cut the flowers from the pink and blue images. Apply adhesive with the sponge and cover with Crystal Clear Powder and adhere to the green die cut image. Cut one of the images into two and adhere the top section to the top of the circles and the other whole image to the card with foam dots.

Stamp the Buttons and Blooms flowers in Paradise Teal and Vibrant Fuchsia onto white card. Colour the centres with Sunflower ink and die cut with the Buttons and Blooms Die. Using the Stack and Store Daubers colour the petal edges with the same colour they were stamped in, shape and  adhere to the card with foam dots.

Stamp the buttons from the Buttons and Blooms Cling Stamp Set in Espresso Truffle ink. Colour with Sunflower ink and die cut with the Buttons and Blooms Die. Apply 3-D Crystal Lacquer to the buttons and leave to dry. When dry adhere to the flower centers and your card is complete.

Created by: Liz Gaze

Print Project

Delightful Daisies

Delightful Daisies
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Crystal Ultrafine Transparent Glitter, 85-glitter
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Paradise Teal, RACP500
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Pink Peony, RACP649
Ranger Archival Ink Pad - Leaf Green, RACP436
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: Score board, die cutting machine, string, scissors

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Card size is 4 1/4 x 5 3/4". Cut white cardstock to 8 1/2 x 5 3/4", score at 4 1/4". Stamp Patchwork Daisy border on card front at an angle using black ink. Die cut and color using Buttercup, Sunflower, Pink Peony, Magenta Hue, Vivid Chartreuse, Leaf Green and Olive ink along with daubers. I slid scrap paper behind the flower petals that are still attached to card front, while using the daubers. Score remainder of card front on score board, every 1/8". Use Flower Shaping Kit gently to shape daisies so they pop out of the card front.

Cut purple and turquoise designer paper to 4 1/4 x 5 3/4". Ink edges of purple panel with Majestic Violet ink and adhere to inside of card. Die cut turquoise panel using the decorative border and eyelet border to match shape of card front. Ink with Paradise Teal ink.

Stamp patchwork daisy vine in Leaf Green ink, color with Pink Peony, Sunflower, Vivid Chartreuse inks and die cut with coordinating dies. Shape with Flower Shaping kit. Stamp buttons using black ink and die cut. Color with Pink Peony, Magenta Hue, Buttercup and Sunflower inks. Die cut additional buttons and adhere together to make a thicker button. Cut small strips of string and glue on top of buttons to make it appear like thread in the buttons. Apply Crystal Lacquer on buttons and allow to dry.

Use scissors to cut sentiment from paper and adhere onto card front using foam dots. Adhere pieces as shown. Finally add Crystal glitter and finish with Hot Mama Prills.

Created by: Waneda Miller

Print Project

Dainty Eyelet

Dainty Eyelet
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Scor-Pal Measuring & Scoring Board, 173842
Fleur Border Basics Die, HCD1-7120
Stack and Store Daubers-Pack of 30, HCDA2-450
StazOn Ink Pad - Teal Blue, TSSZ63
Ranger Archival Ink Pad - Jet Black, RACP468
For My Friend Sentiments Cling Stamp Set, HCPC-3844
Album Tags and Accents Die, HCD1-7202
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: Smooth white cardstock, Zig Clean Clear Brush Markers, Swarovski Crystals, and Glossy Accents.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: The ready top-fold card from white smooth cardstock, measures 6" by 8". Score the lower base of the front panel of the card each time at 1/8" with the help of scor-pal

The front panel of the card has 3 separate layers with different borders. To create the topmost layer of the card panel, choose the paper from the designer paper collection and cut it measuring 5 1/2" by 5 1/2". To the lower base, tape down the eyelet die from Eyelet Border Basics Die and run through die cutting machine. Clean the edges and distress the edges using Wilted Violet Distress ink. For the second layer, cut a piece of 3" by 5 1/2" white smooth cardstock. Cut the fancy border using a die from Eyelet Border Basics Die and edge die from Fleur Border Basic die. For the final third layer, cut a teal color paper measuring 4" by 5 1/2". To the lower base, tape down the eyelet border and run through die cutting machine. Layer them together with the help of double sided glue dots and finally layer the ready panel on the scored card base.

Cut an eyelet tag from white cardstock using Album Tags and Accents Die and also cut it's coordinating mat from teal color paper from the paper collection. Stamp a sentiment from For My Friend Sentiments Cling Stamp Set, using teal color Stazon ink.

Stamp the image from Patchwork Daisy Border Cling Stamp Set using black archival ink and color the image using Zig Clean Clear Brush Markers. Cut the element using it's coordinating die. Stack 2 extra die cuts under the painted element to make it bit sturdy as it is hanging out in the air. Also, stamp, cut and paint a medium size bloom from Button and Bloom Collection. Add a painted button in the center and add glossy accent.

To complete the card, add Swarovski crystals to the flowers centers and in the background as shown.

Created by: Rajni Chawla

Print Project

Anniversary Celebration

Anniversary Celebration
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Embossing Powder - White, RPEJ685
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 6, HCDA1-449
Ranger Archival Ink Pad - Carnation Red, RACP399
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Eyelet Rectangle & Basics Die, HCD2-7189
Ranger Archival Ink Pad - Leaf Green, RACP436
Intricate Swirl Frames Die, HCD2-7191
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Cling Stamp Set, HCPC-3835
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Buttons and Blooms Cling Stamp Set, HCPC-3849
Hand-Stitched Accents Die, HCD1-7207
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209
Patchwork Daisy Die, HCD1-7208

Other Products: Embossing ink, heat tool, foam tape, vellum paper and purple flower pearls from Dress My Craft, glossy Accents, white card stock 280 gsm, paper distresser

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: This is an 8 inches by 8 inches top folding card. To make the card base, cut two pieces of card stock measuring 8 inches by 8 inches and another 8 inches by 8 1/2 inches. Score the second piece at 1/2-inch mark and fold. Apply glue on the inside flap and place the first piece on it to make the card base.

Cut a pattern paper from the paper collection a little smaller than the card base and adhere to the card front. Cut another piece of pattern paper matching the design shown on the card, distress the edges with paper distresser to give a torn effect. Adhere on the first mat layer with foam tape.

Cut a border in white card stock from the Eyelet borer basic die and adhere on the card front in the centre. Stamp the handstitched background image with embossing ink on vellum paper. Add white embossing powder and heat set with heat gun. Cut a stitched frame from white card stock and add the embossed vellum at the back. Adhere this to the card front with foam tape in the centre covering the border die at the base.

Cut an eyelet frame rectangle in white card stock using the smaller dies. Cut a designer paper at its back with clear glue and adhere at the base of the card front as shown. Cut the Intricate Swirl lace frame in white card stock and just add a small piece of the frame on the top of the embossed stitched frame with clear glue.

Add the insert of the lace frame die horizontally on the embossed frame die. Stamp the sentiment from Celebrate Love sentiment set on the oval insert of the frame. Add to the card front with foam tape.

Stamp the images in different colours of majestic violet and vibrant fuchsia from the Patchwork Daisy cling stamp. Cut with matching die and color with the same colors. Stamp the flowers from buttons and blooms collection in red ink. Cut with coordinating die. Shape them on the flower making tool kit. Add buttons. Add glossy accents on the buttons.

Stamp the leaves from the leafy accents cling stamp and cut with coordinating die. Shape them on the leafy accents mold. Add purple flower pearls to the smaller flowers.

Arrange all of the flowers with the leaves on the card front to finish the card. Use small pieces of foam tape to pop up the flowers.

Created by: Anita Kejriwal

Print Project

Old Fashion Wishes

Old Fashion Wishes
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Eyelet Oval Die, HCD1-776
Nuvo Crystal Drops - Gloss White, NU651
Stack and Store Daubers-Pack of 6, HCDA1-449
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ornamental Tags Die, HCD1-7203
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Border Die, HCD1-7209

Other Products: Card stock, white; Ranger Archival Ink Pad, Aquamarine; foam tape; Stickles, Diamond; flat - backed pearls; seam binding; lace

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Cut white card stock 10" x 7"and fold in half to create a 5" x 7" card base. Cut blue design paper 4 7/8" x 6 7/8", add to card front. Cut print design paper 4 3/4" x 6 3/4", add to card.

Cut 2 pieces of lace 5 3/4", add to top and bottom of card. Use Eyelet Oval Die with blue design paper, do not cut out center. Stamp Hand-Stitched Background on white card stock with Bamboo Leaves, die cut with center from Eyelet Oval Die, add to blue piece. Add to card with foam tape. Die cut sentiment from blue design paper with Ornamental Tags Die. Die cut the background from white card stock, adhere the 2 pieces together.

Stamp the Buttons and Blooms flowers with Magenta Hue, die cut with coordinating die, Sponge edges with same ink with daubers, layer and add a flat backed pearl. Stamp 2 sets of the flower spray from the Patchwork Daisy Border set on white card stock, once with Bamboo Leaves and once with Aquamarine. Die cut with coordinating die. Sponge edges with same inks. Add the green flower spray to the card. Cut the flowers from the blue spray and add to the green spray. Add Nuvo Drops to the centers.

Add the pink flowers. Add the sentiment and bow. Add Stickles to flowers and lace.

Created by: Sarah Miller

Print Project

Heartfelt Shaker

Heartfelt Shaker
Products Used
3-D Crystal Lacquer, 3D1844
Embossing Powder - White, RPEJ685
Banners Of Love Cling Stamp Set, HCPC-3803
Eyelet Hearts Die, HCD1-7162
Banners Of Love Die, HCD1-7160
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Plum, RACP499
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209
Zig Clean Color Real Brush Markers - 36 Pack, 478455

Other Products: Smooth white cardstock, acetate sheet, glass fragments, satin white cord, flat back pearl, Versamark, watercolor paper

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Ready top fold card measures 7.5"x 6". To prepare mats choose pattern paper from the designer paper collection and cut two pieces measuring 7.25" x 5.75" and 7" x 5.5". Layer the mats on the ready card base. Cut two pieces from the white card stock using Eyelet Border Basics Die and glue them as shown. Cut five pieces of heart from the white card stock using eyelet heart's die. Also cut a heart from acetate sheet. Stamp hand-stitched background on acetate sheet using Versamark and heat emboss it with white embossing powder. Create shaker heart.

Glue the shaker heart on the center of the card as shown. Stamp patchwork daisy on the water color paper using black Archival. Also stamp flower from the buttons and blooms stamp. Color the images using Zig markers die cut with coordinating dies. Slightly shape the flower, apply Crystal Lacquer on the center of the flower and add glass fragments.

Arrange flowers as shown. Tie a bow using satin white cord and glue it. Stamp love sentiment using Plum Archival on the white cardstock and cut with coordinating die. Cut four more pieces from a white cardstock using the same die. Layer the letters together to give it a 3D look. Glue some flat back pearl on the center of the flower and on acetate heart as shown.

Created by: Uma Didwania

Print Project

Remember When

Remember When
Products Used
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Decorative Medallion Die, HCD1-7144
3D Floral Basics Shaping Mold, HCFB1-464
Ticket and Tags Die, HCD1-7201
Buttons and Blooms Cling Stamp Set, HCPC-3849
Hand-Stitched Accents Die, HCD1-7207
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Die, HCD1-7208

Other Products: Cardstock (White, Green), ColorBox Ink (Seaweed, Green Apple, Violet, Pixie Mauve, Candy), Distress Oxide Ink- Broken China, Yellow Burlap String, Paper Distresser, White Buttons, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, E-Z Runner Ultra, Dual Tip Glue Pen, Adhesives Dots Medium)

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: White 12 x 12" cardstock is the background. Find the 12 x 12 patterned paper with the wavy design I used. Hand cut along those wavy edges, cutting out the middle floral design. Adhere these pieces to either side of the white cardstock. Find and cut out the 2 purple border strips. Adhere these to either side of the layout. Cut a strip of green patterned paper that is 2.75", and mat this in white cardstock. Adhere up the middle of the layout using crafty foam tape. Find and cut out the decorative journal block with the pink decorative edge. Add a piece of it to the top and bottom of the green patterned strip.

Die cut 2 of the decorative medallions using light green cardstock. Adhere to either side of the green patterned strip. Find and die cut out the large mauve tag, and the small green patterned tag. Using the Hand Stitched Accent die, cut out a frame for the photo from white cardstock. Mat this in another layer of white cardstock and distress the edges. Adhere the framed and matted photo to the layout using 3D foam squares. Add the layered tags above the matted photo. Add a bow of burlap string to the mini tag. Find and cut out the "A Time to Remember" sentiment and flag one end. Adhere to the layout just below the framed photo.

Stamp and die cut 1 set of the small Buttons & Blooms in purple ink (Violet). Stamp and die cut 1 small and one medium set in dark pink ink (Berrylicious). Stamp and die cut 1 small and medium set in teal ink (Broken China). Stamp and die cut at least 1 set of buttons in each of the colors above. Add color to the flowers and buttons using ink and daubers. Pink (Candy), teal (Broken China), purple (Pixie Mauve). Stamp and die cut 1 of each of the Patchwork Daisy images using dark green ink (Seaweed). Add color to the leaves and stems using ink and daubers (Green Apple).

Shape the flowers using the 3D Floral Basics Shaping Mold. Shape the leaves using the Deluxe Flower Shaping Kit. Assemble the flowers. Add liquid adhesive on the top of the button images, let dry. This makes the buttons look real. Add a button to the middle of each flower using a small 3D foam square. Add a Patchwork Daisy vine to either side of the framed photo. Add flowers on top of the flower images on the vines. I added a few more buttons around the layout and added a couple of real (white) buttons.

Created by: Tracy McLennon

Print Project

Stitched Birthday Wishes

Stitched Birthday Wishes
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Fleur Borders and Pockets Die, HCD1-778
Classic Border Basics Die, HCD1-7119
4 1/4" x 5 1/2" Foldout Cards-White, HCCF1-443-2
Brilliance Ink - Pearlescent Orchid, TSBL34
Eyelet Oval & Basics Large Die, HCD1-7157
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Leaf Green, RACP436
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Border Die, HCD1-7209
Patchwork Daisy Die, HCD1-7208

Other Products: White card stock, wine card stock, enamel dot, ribbon

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.

Instructions: Click here to see more details. Card Size: 4 1/4 x 5 1/2 ". Cut back panel with the Classic Border and cut wide white borders with the eyelet borders for all sides. Cut a decorative border from decorative paper with the Patchwork Daisy Border die for all sides except back panel. Back panel just cut a wide border with decorative paper to match size of side panels. Cut decorative paper to fit each side and back leaving a very thin border of white (see Emma Lou's video on how to cut the paper to match edges). Glue decorative paper to all sides and then add white eyelet borders. Glue decorative cut decorative paper on top of white.

Stamp, die cut and sponge color on Patchwork Border, Patchwork Daisies, Buttons and Blooms flowers and buttons using Deep Purple, Magenta Hue, Fern Green and Forget Me Not Inks to stamp. Color green leaves with Chartreuse, Magenta blooms with Orchid, and the others with their same color (only light). Build flowers up using the green flowers on the stems as a base and add the Magenta, Forget Me Not and Deep Purple flowers on top. Stamp "Hope Your Day Is Special twice using Magenta Ink, cut 1 out as an oval and fussy cut the "special" from the other. Pop up the hand cut "special" on top of the word special on the oval and glue to inside of first panel. Stamp "Have a wonderful Birthday" using Magenta ink and cut out using the die from Ornamental tags. Cut another out of wine card stock and glue under white at the bottom edge only. Glue the Wonderful birthday sentiment tag on the back panel. Die cut 2 corners and 1 Fleur pocket from white. Glue 2 corners on back panel at the bottom. Glue Fleur Pocket on inside of third panel.

Now arrange and glue vines and flowers on back and sides. Add Crystal Effects and glitter to buttons in flowers and single buttons. Cut 2 round sentiment tags from decorative paper using round tag die. Tie ribbon to each and slide 1 into Fleur pocket and the other under a vine on first panel.

Created by: Robin Clendenning

Print Project

Good Times

Good Times
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Baby It's Cold Outside Prills, ANC832
Go Man Go Prills, ANC818
Fleur Border Basics Die, HCD1-7120
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Emerald Green, RACP447
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Cling Stamp Set, HCPC-3835
Ornamental Tags Die, HCD1-7203
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210

Other Products: White, yellow, rose colored cardstock

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Prepare a 5 x 7" of white card base. Use the Fleur Border Basic die and trim one of the edges, score and fold making a 5 x 7 card base. Choose the paper from the collection, trim to 4 3/4 x 6 3/4", place one of the dies from the Fleur Border Basics to cut the matching curved edge, adhere to the card base. Use white cardstock and the 3 dies from the Eyelet border dies, adhere on top of the curved edge.

Stamp the leaves on white card stock with the Library Green, color in with the Leaf Green, shape using the Leafy Accents Mold, ink the edges with the Emerald Green and adhere to the card around the curved edge as shown.

Stamp the flowers on the colored cardstock with the black ink, cut out, shape using the Flower Shaping Kit, and adhere on top of the leaves.

Cut the sentiment tag out, adhere to card, to finish add Prills and glitter.

Created by: Olga Jewell

Print Project

Purple Birthday Love

Purple Birthday Love
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
I Cannot Tell A Lilac Prills, ANC822
Hot Mama Prills, ANC821
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
StazOn Ink Pad - Olive Green, TSSZ51
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Heart of Gold Prills, ANC804
Leafy Accents Cling Stamp Set, HCPC-3835
Furry-Tailed Frolic Die, HCD1-7197
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210

Other Products: White and Purple Cardstock, Hot Glue Gun, Dimensional Tape, Cantaloupe Memento Ink, ColorBox Mixed Media White Ink

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: My card size is 4 1/4 X 5 1/2". Make card base and cover the inside with a piece of the paper collection. Using the Eyelet Border Basics die cut the front of the card and then stamp using the Hand Stitched Background stamp and white ink.

Stamp the sentiment onto white cardstock using Majestic Violet ink. Cut out using the circle die and then cut a piece of purple cardstock using the scallop circle die. Glue the two pieces together to make a medallion and then use dimensional tape to adhere to the card front.

Stamp the flower petals and leaves with various ink colors and cut out with coordinating dies. Color the leaves with Bamboo Leaves Memento ink and a dauber. Lay the leaves onto the mold, spritz with water and run through the Vagabond 2. Lay them aside to dry. Shape the flower petals and add Prills to the centers. Set aside to dry.

Once everything is dry, decide on placement and use the hot glue to secure.

Created by: Glenda Brooks

Print Project

Thanks for the Memories

Thanks for the Memories
Products Used
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
Embossing Powder - White, RPEJ685
Fleur Border Basics Die, HCD1-7120
Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Pink Peony, RACP649
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Groove Golf Tool Set, DMCT4185
Leafy Accents Cling Stamp Set, HCPC-3835
Furry-Tailed Frolic Die, HCD1-7197
Ticket and Tags Die, HCD1-7201
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210

Other Products: White Cardstock, 3D foam tape, Gold Mirror Cardstock, Clear Dry glue, Twine, Purple Cardstock, Versa mark ink, Orange Embossing powder, Distress ink Cracked Pistachio

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: The finished card measure 6 x 6-1/4". For the card base cut white cardstock 12 x 6-1/4", score at 6" from the longest side and fold.

Choose pattern paper from the collection, cut it to size 5-3/4 x 6" and adhere on top of card base. Die cut white cardstock and purple cardstock using Eyelet Border Basics Die. Die cut gold mirror cardstock using the Fleur Border Basics Die. Layer the die cut cardstocks as shown with clear drying glue.

Cut white cardstock 6 x 4". Die cut this cardstock using the Fleur Border Basics Die . Color the cardstock with distress ink - Cracked pistachio, and stamp with Hand-stitched Background Cling Stamp Set using versa mark ink and heat emboss with orange embossing powder. Arrange it on the upper part of the card with 3D foam tape.

For flowers stamp vellum sheets with Buttons and Blooms Cling Stamp Set using versa mark ink and heat emboss with Ranger's white embossing powder. Die cut the images using the coordinating die. Color the flower petals using Archival ink - Pink Peony. Shape the flowers using Groove Golf Tool. Apply Crystal Clear Glitter in the center of the flower with clear dry glue.

Stamp white cardstock with Leafy Accents Cling Stamp Set using Archival ink - Library Green, die cut using coordinating die. Color the leaves using Archival ink - Olive and colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold

Die cut tags form the paper collection using Ticket and Tags Die. Die cut thank you sentiment from the paper collection and purple cardstock using the circle dies from the Furry-Tailed Frolic Die. Mat the sentiment die cut out with purple cardstock using 3D foam tape and arrange it in the upper right side of the card. Arrange the flowers and leaves as shown.

Created by: Pavitra Chanchal

Print Project

Exploding Daisies

Exploding Daisies
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Deluxe Flower Shaping Kit, HCST1-401
Botanic Window Die, HCD1-7100
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Furry-Tailed Frolic Die, HCD1-7197
Just For You Sentiments Cling Stamp Set, HCPC-3845
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Border Die, HCD1-7209
Patchwork Daisy Die, HCD1-7208

Other Products: White cardstock, Green Rhinestones, Brilliance Pearlescent Lavender

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Click here to see more photos of this project, then see more step by step photos by clicking on my name at the bottom of these instructions and head over to my blog. Using white cardstock cut your base box to 12" x 12". Using a bone folder bone folder, score on the 4" mark and the 8" mark and turn and repeat. Cut out in corner to create a cross.

Using your patterned cardstock, select 2 sheets the same and trim the selected sheets to 3 3/4" x 3 3/4". You will require 5 for the front and 5 for the inside. Adhere with designer dries clear adhesive. You will require 2 more mats, 1 for the top of your box and one for the inside top of the box.

Using your sentiment stamps, stamp the "happy birthday" and the "let's celebrate you" 2 times each on white cardstock using Memento Teal Zeal ink and die cut with the circle die from the Furry Tailed Frolic Die set. Using the matching eyelet circle die, die cut 4 circles from the leftover cardstock. Using 3d dots adhere the sentiments to the matching circles. Adhere the sentiment circles flat on opposite sides of the box, 2 on the inside and 2 on the outside. Using the "have a wonderful birthday" stamp, stamp 4 times on white cardstock using Memento Teal Zeal ink and trim down to 3 3/4" x 1". Adhere the 1" strips flat on opposite sides of the box 2 on the inside and 2 on the outside. The outside and insides will look the same. Trim the striped cardstock down to 3 3/4" x 3/4", you will need 4 strips, adhere flat on the plain sides on the inside and repeat on the outside.

Using white cardstock cut 5 3/4" x 5 3/4", using a bone folder, place a bone fold line at the 3/4" mark all the way around, you will be left with a square in the middle measuring 4 1/4" x 4 1/4". Trim each end in a little to make a flap to adhere together to create your box lid. Adhere in place with designer dries clear adhesive. Adhere a patterned mat to the top of the lid.

Repeat the above step with 5 1/2" x 5 1/2" to create the inner box. you will end up with a box 4" x 4". Adhere a patterned mat to the top of the lid.

Using your Botanic Window die, die cut 2 die cuts. Line up each on the top of the smaller box lid. Adhere along the straight edge and run both into the middle until they meat, fold and adhere in place.

Using your sentiment stamp, stamp the "Happy Birthday to you" twice with Memento Teal Zeal ink and fussy cut, leave about a 1/4" strip along the bottom to fold to make a stand.

Using your Bamboo Leaves ink, stamp the Patchwork Daisies 2 times each size and the Patchwork Daisies in the Border set 2 times. Color the leaves in the Archival Vivid Chartreuse and the flowers in the Pearlescent Lavender and cut with coordinating dies. Adhere the smaller sprays to the front and back of the botanic windows.

Adhere the sentiment to the front applying glue to the bottom lip and then using a dot of glue at the top of each sentiment push together to make a join. Using the smaller daisy sprays, trim down to make 2 smaller pieces adhere one on the top of each side.

Using your paper collection, select the purple border strips, you will need 2 strips. Line up the border and adhere around the edge of the box lid, 1 strip will cover 3 sides, then trim off and adhere the last panel and trim. Line up the larger daisy die cut onto the top of the box lid. When happy with their placement, bend slightly so the flower hangs over the sides. Adhere in place with designer dries clear adhesive on the leaves and let the flowers float free. Your box is now complete, add lime green rhinestones to your flower canters. NOTE - I have left the centre box float free, you can adhere in place if you like.

Created by: Tracy Crane

Print Project

Have a Beautiful Day

Have a Beautiful Day
Products Used
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Sweet Plum, TSMP506
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Cactus Flower, RACP985
Nuvo Crystal Drops - Neptune Turquoise, NU661
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Border Die, HCD1-7209

Other Products: Fine liner black, Flat back pearl, Bling on the roll, Foam pads, Lilac Cardstock, pencil, scissor,

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of the Lilac Cardstock at 10 x 7". Score in half so you have a 5 x 7" card. Now cut a piece of the paper collection at 6 3/4 x 4 3/4", distress the edges with a scissor and glue the piece on the front of your card. Cut a piece of the lilac cardstock 1 inch wide, distress one edge and glue this on the front about 1 inch from the left corner, then take a piece of design paper also 1 inch wide, distress that and glue it down on the lilac piece overlap them. Then cut a piece of the collection at 3 1/2" wide and stamp with the Teal Zeal and the patchwork daisy Border edge stamp on 1 edge of the paper. Die cut it with the coordinating die, distress the left edge with a scissor and glue this on top of your card, fold the leaves a little bit up.

Take a strip of the bling on the role and glue that on the left side of the last paper, take your fine liner and make little stripes on the edge of the papers. Stamp with the Oakberry Blossom stamp, 4x the leaves from that set with Rich Cocoa on white cardstock and color them with the Leaf Green and the edges with some Cactus Flower, then place them in the 3D mold, spray them with water, put the lid on it and run it through the machine. Place the leaves on the front of your card under the folded leaves. Stamp the 2nd size and the 3rd size of the Buttons and Blooms flowers with Sweet Plum on white cardstock and color the center with Majestic Violet and then the rest of the flower with Cactus Flower. Shape them on your shaping mat and glue the flowers on top of each other 1 big flower and 2 small ones, place these on the edge on the right side of that edge die shape.

Place a flatback pearl in the center of the flowers, then put some glue in it and sprinkle some Crystal Clear in it, let it dry and then on top of that add a dot with the Nuvo drops Sweet Lilac. You can also put some Turquoise drops in between the flowers on your card. Cut a word from the paper collection and mat it on 3D foam pads on lilac cardstock and place this on front of your card. Cut a piece of Design paper at 6 3/4 x 4 3/4" for the right side in the card and a piece of white cardstock the same size for the left side of the inside of the card, make some lines with a pencil so you can write in the card, also make little stripes on that with the fine liner.

Created by: Els Schutte

Print Project

Heartfelt Thanks

Heartfelt Thanks
Products Used
Vellum Paper - 10 Sheets, 242174
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Thank You Sentiments Cling Stamp Set, HCPC-3846
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Die, HCD1-7208

Other Products: White stamping card, Rich razzleberry ink and card stock, Balmy Blue ink, Granny Apple Green ink and card stock, Memento black ink, Wet glue, Hot glue, Gems (for flower centres), Clear embossing powder, Foam pads

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Score a 7" x 11.5" piece of Rich Razzleberry card at 5.75" to create the card base.

Select paper for the base layer of the card and cut slightly smaller than the card base to leave a thin rich razzleberry border and adhere into place.

Cut a 5.25" x 6.5" piece of vellum and ink around the edges using granny apple green. Adhere to the base card using wet glue, putting the glue in the centre of the vellum only so that the glue cannot be seen.

Select the "topper" and cut to 5.25" x 3.80". Stamp the sentiment in black ink and cover with clear embossing powder. Remove the excess and heat to set.

Layer the sentiment topper onto granny apple green card with a thin border and then onto rich razzleberry with a slightly thicker border and position onto the card using foam pads

Die cut the eyelet floral die in rich razzleberry card, retain the small centre flowers. Line the eyelet dies against this die and run through the die cutting machine to produce the eyelet strip. Cut to size and glue into position at the top and bottom of the card as shown. Add some of the small flowers using wet glue.

Stamp two of the Patchwork Daisy swirls onto white stamping card in black memento ink and colour using the stack and store daubers in Balmy Blue and Rich Razzleberry ink. Die cut and shape using the deluxe flower shaping tools. Glue into position using hot glue and add the gems to the centre of the flowers when the glue has cooled.

Created by: Cheryl Morgan

Print Project

Darling Daisies

Darling Daisies
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Sweet Plum, TSMP506
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Rajni Chawla's Crystal Clear, PGM15015
Circle Basics Large Die, HCD1-7155
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Fern Green, RACP962
Butterfly Kisses Decorative Die, HCD1-7179
Nuvo Crystal Drops - Copper Penny , NU654
Just For You Sentiments Cling Stamp Set, HCPC-3845
Album Tags and Accents Die, HCD1-7202
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Patchwork Pocket & Patterns Die, HCD1-7206
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209

Other Products: Yellow marker, Die cutting machine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Create a 5.5-inch x 5.5-inch card base. Cut out a piece of lavender paper from the Patchwork Daisy Paper Collection slightly smaller than the base, adhere to the card base. Adhere a strip of purple floral paper from the paper collection to the left side as shown in photo.

Stamp the Hand-Stitched Background Cling Stamp on white cardstock with Sweet Plum, sponge the cardstock with Sweet Plum. Cut out the Butterfly Kisses Decorative die in black cardstock and cut the Hand-Stitched Background to fit inside. Cut a 4.25-inch square in blue stitched paper from the paper collection and a mat in black cardstock that is slightly larger.

Stamp each of the flower flourishes from the Patchwork Daisy Border set in black twice, cut out with corresponding dies and sponge with Sweet Plum and Fern Green, color the flower centers with a yellow marker. Sculpt the flowers and adhere two together for dimension, add Crystal Clear glitter.

Stamp the zig zag stamp from the Patchwork Pocket and Patterns set on dark purple paper from the paper collection with the Sweet Plum ink and cut out with corresponding die, use die to cut out zig zag in black cardstock for shadow, cut this in half lengthwise and adhere to top and bottom of the purple zig zag. Adhere to the bottom of the card. Adhere the blue square and black mat to card and the black frame and lavender Hand-stitched square on top.

Stamp the sentiment from the Just for You Sentiments set in black on white cardstock and cut out with a circle die from the Circle Basics die set, cut out a larger circle die to mat in black. Cut out the tag die from the Album Tags and Accents Set in purple paper from the paper collection and one in black cardstock. Cut the black tag in half and adhere a half to the top and bottom of the purple tag for a shadow piece. Add Nuvo Drops in Copper Penny to each end of the tag. When this dries, adhere to card. Adhere the flower flourishes to each side of the sentiment tag as shown.

Created by: Darla Rants

Print Project

Delicate Daisies

Delicate Daisies
Products Used
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Paper Pack of 10 - White, HCPP1-438-2
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Intricate Swirl Frames Die, HCD2-7191
Ticket and Tags Die, HCD1-7201
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Die, HCD1-7208
Zig Clean Color Real Brush Markers - 36 Pack, 478455

Other Products: Watercolours - Windsor and Newton, Schminke, Watercolour paper, iCraft Dew Drops, Creative Expressions embossing powder Aurora Cyrstal, Versamark ink

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Cut a piece of white cardstock 10" x 7", score at 5" along the long side and fold to create a 7" x 5" base card. Cut a piece of patterned paper 5" x 7" and adhere to the front of the card. Die cut a frame from the HCD2-7191 Intricate Swirls Die set from white cardstock and adhere to the front of the card. Stamp the image from the HCPC-3854 Handstitched Background set in Versamark ink on watercolour paper and emboss with the CE Aurora Crystal embossing powder. Colour the card with watercolours in a random pattern and when dry trim to 6" x 4" and adhere to the front of the frame. Die cut the outer frame and the inner decorative die from the same die set from white cardstock. Add Frosting Powder to the frame and adhere the frame to the card front using foam squares. Adhere the centre die to the middle over the water colour background.

Stamp the images from the HCPC-3852 Patchwork Daisy Stamp set in Jet Black ink on watercolour paper. Colour with the Zig Clean Colour Brush Markers and die cut with the coordinating dies. Shape and adhere to the bottom left and the top right of the card.

Stamp the images from the HCPC3840 Buttons and Blooms Stamp set in Dark Purple ink on super White cardstock. Colour the images with Majestic Violet ink and die cut with the coordinating die. Shape and add Crystal Clear glitter to the flowers with Dries Clear glue on a damp sponge. Adhere over the flowers on the watercoloured images.

Stamp the buttons from the HCPC3840 Buttons and Blooms Stamp set in Jet Black ink on watercolour paper and colour in with Zig Clean Colour Brush markers before die cutting with the coordinating die. Adhere to the centres of the flowers.

Die cut the tag from the patterned paper using the HCD1-7201 Ticket and Tags Die set and adhere to the centre of the card as shown.

To finish, add three small dew drops to the watercolour background.

Created by: Patricia Manhire

Print Project

Elegantly Patched

Elegantly Patched
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Paradise Teal, RACP500
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Leaf Green, RACP436
Eyelet Lace Frames Die, HCD2-7192
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Ornamental Tags Die, HCD1-7203
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209
Patchwork Daisy Die, HCD1-7208

Other Products: White cardstock, Big Shot Machine

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Card size 6" x 6" (final size). Adhere pattern paper size 3" x 5.875" with distress edges at the bottom of the card as shown.

Cut one eyelet border die on white cardstock and adhere it on top of the pattern paper as shown.

Take another cardstock with size 5" x 5.875" and stamp Patchwork border with archival ink-jet black. cut it with matching die and cut the extra paper from top and adjust it according to the card size and distress the edges with archival ink-paradise teal as shown and adhere them with foam tape.

Stamp Patchwork Daisy with archival ink-jet black and cut them with matching die and color them with archival ink-leaf green and paradise teal and sprinkle crystal clear glitter and adhere them on the top base of the card as shown.

Stamp Patchwork Daisy Border twice on white cardstock with archival ink-jet black and cut them with matching die and color them with archival ink-Paradise Teal and Rose Madder and sprinkle crystal clear glitter and make two layer flowers and arrange them as shown.

Cut Ornamental tag die on white cardstock and add sentiment, as seen on the picture and adhere it on the bottom of the card with foam tape.

Cut one Eyelet Lace Frames die on white cardstock and adhere it on the back of the card, as shown.

Created by: Shalini Pahwa

Print Project

A Shadow Box Birthday

A Shadow Box Birthday
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
3-D Crystal Lacquer, 3D1844
Crystal Ultrafine Transparent Glitter, 85-glitter
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Darice Adhesive Foam Strips, D120601
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Card Shadow Box Set-Black, HCBC1-456-1
StazOn Ink Pad - Olive Green, TSSZ51
Ranger Archival Ink Pad - Garden Patina, RACP992
Ranger Archival Ink Pad - Cactus Flower, RACP985
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Cling Stamp Set, HCPC-3835
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Patchwork Daisy Border Cling Stamp Set, HCPC-3853
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210
Patchwork Daisy Border Die, HCD1-7209
Patchwork Daisy Die, HCD1-7208

Other Products: Hot glue gun, Die cutting machine

For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Create a 6 x 6" card base using from white paper. Cut a piece of paper from the Patchwork Daisy Paper Collection 5 3/4 " x 5 3/4 " and adhere to the card base using Dries Clear Adhesive.

Instructions: Take a card Shadow Box Set-Black and glue it together. Glue it to base of card. Take Eyelet Border Basics Die and cut it out as shown from black paper, divide in half and glue it on the top and bottom of shadow box from inside edge.

Stamp one of each flowers Swirls from Patchwork Daisy Cling Stamp Set and Patchwork Daisy Border Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green ink and shadow with this same ink.

To create flowers stamp Buttons and Blooms Cling Stamp on foam paper with Ranger Archival Ink Pad - Cactus Flower ink and cut using the coordinating dies. Colour with Memento Dye Ink Pad - Lulu Lavender ink. You will need two petals for each flower to create flowers. Colour buttons with Ranger Archival Ink Pad - Garden Patina

Use an iron or heat gun to heat the petals and then shape using your fingers. Sponge the petals with dries clear adhesive and sprinkle with Ultrafine transparent glitter. Layer the petals together using the hot glue gun making sure to offset them. Heat up buttons. Use 3D lacquer on the top of buttons. Glue buttons in the middle of flower. Add a little hot glue to the underside of the flower to adhere. Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter

Stamp the leaves using Leafy Accents Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Leafy Accents Shaping Mold. Adhere the flowers and leaves using a hot glue gun.

Cut out sentiment from paper collection and add to card using 3d foam tape. Adhere the flowers and leaves using a hot glue gun.

Created by: Ewelina Panka

Print Project

All Tucked In

All Tucked In
Products Used
5pc. Acrylic Block Set, SUAH05
Stamp Mat Pad, D110305
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Spring Bling Prills - 12 Pack, ANC850
Spellbinders Tool N' One, 359848
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Go Man Go Prills, ANC818
Hot Mama Prills, ANC821
Fleur Border Basics Die, HCD1-7120
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Heat It Craft Tool, RAHT
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Eyelet Border Basics Die, HCD1-7210

Other Products: Mowed lawn Distress ink, cuttlebug poppy embossing folder, crafters companion lace embossing folder, Canson watercolor cardstock, Versamark Ink, Gansai Tambi Watercolors, Koi Watrbrush, pearls.

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Take a piece of 5 1/2" x 5 1/2" piece of white cardstock and ink it with mowed lawn distress ink and adhere it to a 6" x 6" card base. Take a 5 1/4" x 5 1/4" piece of white cardstock and emboss it using Cuttlebug, Poppy Embossing folder. Adhere it on the previous green layer of cardstock.

Die cut 2 pieces of white cardstock using the Eyelet Border Basics Die and 1 piece using the Fleur Border Basics die. Emboss the Fleur Border Basics Die cut using Lacy embossing Folder and ink the inverted scallop die cut using mowed lawn distress ink. Stack them together as shown and trim off the excess to make a 6 1/4" wide piece. Curve it, add glue to the left and right edges and adhere it to the top of the card as shown so that it forms a curved raised pocket.

Stamp the flowers from Buttons and Blooms Cling Stamp Set using Versamark Ink on watercolor cardstock and heat emboss them using Heat It Craft Tool and White Embossing Powder. Color them using Koi Watrbrush and blue, pink, orange, yellow and green colors from Gansai Tambi Watercolors. Die cut them using matching dies from Buttons and Blooms Die. Shape all the flowers using Deluxe Flower Shaping Kit. Use the green flower petals as leaves for the flower arrangement. Add Go Man Go, Hot Mama and Blue Suede Shoes prills to the flower centers.

Glue the flowers so some are partially inside the pocket. Add pearls to the daisy border as shown to add finishing touch.

Created by: Nupur Priya

Print Project

Beautiful You

Beautiful You
Products Used
5pc. Acrylic Block Set, SUAH05
Stamp Mat Pad, D110305
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Eyelet Oval Die, HCD1-776
Glue Tip Pins, PIN6
Patchwork Daisy Cling Stamp Set, HCPC-3852
Patchwork Daisy Paper Collection, HCDP1-296
Patchwork Daisy Die, HCD1-7208
Zig Clean Color Real Brush Markers - 36 Pack, 478455

Other Products: Glitter Glue, 

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

Instructions: Score a piece of white cardstock to 5 x 7". Next take a piece of patterned paper from the collection and cut to 4.5 x 7" and adhere to your card front.

Now take your memento black ink and stamp and diecut 2 sets of images from the patchwork daisy set. Once done color using your zig clean color pens.

When done add some glitter glue sparingly across your stamped images.

Now take your white cardstock and diecut the eyelet oval and adhere to the center of your card. Now take the inner die and diecut an oval using the patterned paper. Once done adhere your stamped images to the outer edges of your eyelet oval die

Finish it off by using one of the pre-printed sentiments from the paper collection and glue to the center to complete the look.

Created by: Monica Edwards

Print Project

Stitched, Bordered and Glittered

Stitched, Bordered and Glittered
Products Used
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Spellbinders Tool N' One, 359848
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Fleur Border Basics Die, HCD1-7120
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Heat It Craft Tool, RAHT
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Olive, RACP482
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Cling Stamp Set, HCPC-3835
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Just For You Sentiments Cling Stamp Set, HCPC-3845
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Die, HCD1-7205
Hand-Stitched Background Cling Stamp Set, HCPC-3854
Patchwork Daisy Paper Collection, HCDP1-296
Eyelet Border Basics Die, HCD1-7210

Other Products: Glossy Cardstock, Hot Glue Gun, Sponge, Misti, Big Shot Plus, Scissor, Floral Oriental Cardstock, Yellow cardstock, Blue cardstock, Sparkle Sheer Shimmer Spritz, Dimensional tape, Dimensional dots, VersaMark, WOW Sparkling Snow Embossing Glitter, Distress Oxide Inks - Wilted Violet, Picked Raspberry and Peacock Feathers, Ranger Ink Blending Tool,

For more tips on creating with the Patchwork Daisy collection, watch the tutorial at https://youtu.be/v5BEpcSlmoI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size is 6 x 5". Score and fold 10 x 6" white cardstock at 5" on the long side. Using the plain edge die from the Fleur Border Basics die set, cut the front edge of the card at 4" at the widest point.

Stamp the Hand-stitched Background Cling Stamp on 4 7/8 x 5 7/8" glossy white cardstock using VersaMark ink. Sprinkle with WOW Sparkling Snow Embossing Glitter and heat set using the Heat It Tool. Using the Ranger Ink Blending Tool, color the glossy cardstock with Distress Oxide Inks - Wilted Violet, Picked Raspberry and Peacock Feathers. Wipe it down with a clean cloth to clean the ink off of the embossed stiches. Diecut the edge with the plain edge die from the Fleur Border Basics die set.

Stamp the sentiment on white cardstock using Archival Jet Black ink, diecut using the Eyelet Circle die from the Furry-Tailed Folic Die, Diecut a border using the outer and inner dies from the same set, adhere, sponge with dries clear adhesive and sprinkle with Crystal Ultra-fine Transparent glitter. Adhere to the card base as shown using dimensional dots. Diecut the Eyelet Border Basics die from white cardstock, sponge with dries clear adhesive, sprinkle with glitter and adhere to the card base.

Stamp the flowers on Floral cardstock using VersaMark, sprinkle with WOW Sparkling Snow Embossing Glitter, color with Distress Oxide Inks - Wilted Violet, Picked Raspberry and Peacock Feathers, buff the color off of the embossing and diecut using the coordinating dies. Shape using the Deluxe Flower Shaping Kit. Adhere two petals together to create the flowers.

Stamp the Leafy Accents leaves on floral cardstock using Archival Olive ink, color with the same ink, highlight with a little Berrylicious ink, diecut using the coordinating dies and shape using the Leafy Accents Mold. Spray with Sparkle Sheer Shimmer Spritz and let dry. Sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.

Adhere the leaves and flowers to the card base as shown using a hot glue gun.

Created by: Janet Saieva

Print Project

Comments

Comments Policy



KENDELL
They are all beautiful and I would love to be able to afford all the dies etc
Thursday 15th of November 2018 07:48 AM