Fun Inspiration with the Buttons and Blooms
Hi Friends,
How is your week going...? Do you need to get back into your craft room and create something pretty? You're in the right spot! The creativity featured below from design team members all across the globe, will knock your socks right out of the park and you'll be inspired to create your next one of a kind masterpiece that you and your friends will love!
"Love, love, love Heartfelt Creation Stamps and Dies. The stamps are always crisp and having matching dies saves fussy cutting. They take cardmaking to the WOW level." -Sharon H
"I was very happy with the prompt service from Heartfelt Creations. The products are very easy to use and help to make beautiful cards. Thank You." -Mary W
Hurry! Limited Edition Save up to 50% Get your favorites before they are gone forever! Products you'll love for $9.99 and up. While supplies last. (Many Limited Edition products only available until 12/08 or while supplies last) Shop now
Have a fun time creating! Emma Lou
P.S. Are you a Platinum member? If not, find out how you can SAVE an extra 20% on all your purchases here: http://hcgo.co/Platinum
Creative Inspiration of the Week
Delicate Borders
Heat It Craft Tool, RAHT
5pc. Acrylic Block Set, SUAH05
Spellbinders Tool N' One, 359848
Stamp Mat Pad, D110305
Scor-Pal Measuring & Scoring Board, 173842
Nuvo Crystal Drops - Bright Gold, NU653
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Manganese Blue, RACP454
Ranger Archival Ink Pad - Jet Black, RACP468
Stack and Store Daubers-Pack of 30, HCDA2-450
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Arrows and Banner Die, HCD1-7204
Album Tags and Accents Die, HCD1-7202
Classic Border Basics Die, HCD1-7119
Delicate Border Basics Die, HCD1-7118
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Other Products: VersaMark Ink, Ranger black embossing powder, Crafter's Companion Zen Garden Embossing folder
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Take 3 pieces of 5" x 7" white cardstock. Score 2 pieces at 1/2" and 3 1/2". Fold the cardstocks at scored lines so that it resembles Z and adhere the 1/2" tab on left and right sides of the 3rd 5" x 7" white cardstock so that the joint is on the back and the 2nd fold of both the pieces meets at the center. Die cut the free edges of the top flaps using the die from Classic Border Basics Die. Die cut the pieces of pattern papers form Buttons and Blooms Paper Collection using the dies from Delicate Border Basics Die and Classic Border Basics Die and decorate the front. Use papers from same paper collection to decorate the inside of the card. Stamp the sentiment from Special Birthday Sentiments Cling Stamp Set on a piece of pattern paper from the same paper collection and die cut it using the die from Arrows and Banner Die. Mat this piece on a piece of white cardstock die cut using the bigger die from the same die set. Glue this down on the inside of the card as shown.
Die cut a piece of white cardstock and a piece of pattern paper using the die from Album Tags and Accents Die and adhere them together. Die cut another piece of white cardstock using the smaller die from the same set and emboss it using Crafter's Companion Zen Garden Embossing folder. Layer this on the previous die cut. Adhere this die cut on the left flap of the card aligning the middle edge with the middle of the die cut.
Stamp the sentiment from Hand-stitched Accents Cling Stamp Set on a piece of white cardstock using Versamark Ink and heat emboss using Ranger black embossing powder and Heat It Craft Tool. Ink the image with Manganese Blue, Leaf Green and Vibrant Fuchsia Archival Inks using Stack and Store Daubers. Die cut this using the matching die from Hand-stitched Accents Die. Die cut 4 more pieces of white cardstock using the same die. Stack and adhere all of these together and then adhere them on the card as shown. Add Bright Gold Nuvo Crystal Drops to the flower centers to add finishing touch.
Heartfelt Birthday Wishes
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 6, HCDA1-449
Deluxe Flower Shaping Kit, HCST1-401
Ornamental Tags Die, HCD1-7203
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Paper Collection, HCDP1-295
Other Products: Glossy accents, scoring board, Distress ink-Chipped Sapphire, peeled paint, Faded jeans, 3d foam tape, white card stock
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Use white card stock to make the card base. Cut card stock measuring 5 inches by 7 1/2 inches and 5 inches by 7 inches. Score at 1/2 inch on the longer side on the bigger card stock. Fold the flap. Apply clear glue inside the flap. Adhere the second piece on this to form a card base that measures 7 inches by 5 inches. Score the front of the card base at 1/8-inch intervals on the scoring board. Distress lightly with peeled paint and faded jeans distress inks.
Cut a piece of pattern paper 4 3/4 inches by 5 inches and distress with peeled paint and adhere to the card base using foam tape. Cut a frame from the stitched Rectangle die and distress with Faded Jeans ink. Add a backing of pattern paper of the same design that has been used as the mat layer and adhere to the card front in a tilted manner as shown in the card.
Stamp the arrow and the hexagonal images from the collection in chipped sapphire ink. Cut with coordinating die. Colour with Chipped sapphire and faded jeans and adhere to the card front.
Stamp the buttons and flowers in purple and blue Archival ink and colour with the same colours using a dauber. Cut with coordinating die. Shape them using the flower shaping mold. Add buttons in the centre. Add the flowers and buttons on the card. Add glossy accents on the button and let it dry.
Make leaves by stamping the images from the Leafy Accents stamp set with library green ink on white card stock. Colour using the green Archival inks. Cut with matching die and shape in the flower shaping mold for leafy accents.
Cut a mat layer of the die cut from Ornamental tag die. Stamp the sentiment, add a button and add to the card as shown.
Oh Sew Pretty Pocket Box
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Olive, RACP482
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Rain Boots and Blossoms Die, HCD1-7169
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Patchwork Pocket & Patterns Die, HCD1-7206
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Cling Stamp Set, HCPC-3849
Buttons and Blooms Paper Collection, HCDP1-295
Other Products: White cardstock, silver mirror cardstock, VersaMark, white embossing powder, Blue velvet cardstock, vellum paper, Silver metal knob
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view more photos of this project. Ready box measures 3.25" x 3.25" x 4.5". To prepare a box first take a piece of white cardstock measuring 13.5" x 5.5". Score and create a box according to this template.
Stamp 4 pockets on the blue velvet cardstock using Versamark and heat emboss it with white embossing powder. Cut with coordinating die. Mat the pockets on silver mirror cardstock, 1/16" bigger on all sides. Glue it on the all 4 sides of the box. Cut a piece of white cardstock measuring 3.25" x 3.25". Mat it inside of the box to create a flat surface. Choose a pattern paper from the designer paper collection and cut 4 pieces measuring 3" x 2.5". Mat them on the silver mirror cardstock, 1/16" bigger on all 4 sides. Glue them on inside walls of the box. Cut a piece measuring 3" x 3" from the pattern paper and mat it on the silver mirror cardstock, 1/16" bigger on all sides. Glue it inside of box surface.
To prepare a lid take a piece of white cardstock measuring 4.25" x 4.25". Score on 1/2" and 1" on all 4 sides and fold to prepare a small box. Take a piece of white cardstock measuring 3.5" x 3.5". Glue the lid on it. Cut a pattern paper measures 3.25" x 3.25" and mat it on the silver mirror cardstock, glue it on the top of the lid. adhere a knob to the middle of the lid.
Stamp flowers from the Buttons and Blooms stamp on the vellum paper using VersaMark and heat emboss it with white embossing powder. Cut the flowers with coordinating die. Stamp leaves from rain boots and blossoms stamp on the white cardstock using olive green ink. Color with leaf green and olive green archival and cut with coordinating die. Also stamp some leaves from leafy accents stamp on the white cardstock using olive green ink and color them with leaf green and olive green archival and olive green archival. Cut with coordinating die and shape them in shaping mold. Stamp some buttons on the white cardstock using different color archival and cut with coordinating die. Layer 5 buttons together of same size. Apply glossy accents on the buttons and let them to dry for some time. Glue all the elements on the box as shown in the picture.
Blooming Birthday
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Manganese Blue, RACP454
Go Man Go Prills, ANC818
Baby It's Cold Outside Prills, ANC832
Deluxe Flower Shaping Kit, HCST1-401
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Other Products: White, Green, Blue, Yellow and Rose colored cardstock, foam dots
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Prepare a 7 x 7" card base. To achieve this, cut white cardstock 7 x7", and another 7 x 8", score and fold on the 7-inch line and use the Dries Clear Adhesive and connect the 2 together. Cut a piece of the Buttons and Blooms paper down to 6 7/8 x 6 7/8" and layer on top. Cut another piece of the Buttons and Blooms paper 6 x 6" card fronts, stamp the sentiment on the right side of the card front. Place foam dots to the back, adhere to card. Cut out 2 of the Hand stitched frames, cut the dies off and place foam dots to the back, add to the card base as shown making it look more like a square frame.
Stamp the flowers on the blue, yellow and rose colored card stock with the matching ink colors. Cut out with the coordinating die, shape using the Flower Shaping Kit, add prills to the center of each flower and set aside. Stamp the leaves on green cardstock with the Library Green ink, cut out with the coordinating die, place in the leaf mold stamped side down, spray a small amount of water, run through the die cut machine and ink the edges with the Library Green ink. Adhere to the left side of the card. Add flowers on top of the leaves. Stamp the arrow, sentiment on white cardstock with the Manganese Blue ink, cut out with the coordinating die, add foam dots to the back and adhere to card.
To finish the card, add glitter to all the leaves and flowers.
Bows, Buttons and Blooms
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Majestic Violet, RACP494
Memento Dye Ink Pad - Danube Blue, TSMP600
StazOn Ink Pad - Olive Green, TSSZ51
Hot Mama Prills, ANC821
I Cannot Tell A Lilac Prills, ANC822
Heart of Gold Prills, ANC804
Minnie Pearls Prills, ANC803
Deluxe Flower Shaping Kit, HCST1-401
Album Tags and Accents Die, HCD1-7202
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: White and Blue Cardstock, Dimensional Tape, White Seam Binding, Scor-Tape, Dandelion Memento Ink
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: Click here to view a larger image of this project. My tag is 4 x 6". Cut out two tags using white cardstock and the coordinating die. Glue the pieces together and this makes a heavier tag. Cover with a piece of the paper collection cut with the coordinating die. Using blue cardstock, cut out the base for the medallion and the two corner pieces using the coordinating dies. Glue the two corner pieces to the bottom of the tag. Add the buttons to the corner pieces by gluing them down. Find a medallion on the paper collection and use the coordinating die to cut out. Glue it to the medallion base. Using dimensional tape adhere the medallion to the tag front.
Stamp the flower petals using various inks onto white cardstock. Use the coordinating dies to cut out the petals. Spritz the back with a bit of water and use the Deluxe Flower Shaping Kit to shape; set aside to dry. Add coordinating color Prills to the center of the flowers and allow to dry. Decide on the placement of the flowers and glue them down.
Using blue ink, spread some onto a craft mat and spritz with water. Spray some seam binding with water then drag it through the ink and scrunch to allow to dry. Once dry tie a bow and use Scor-Tape and Designer Dries Clear Adhesive to adhere to top of tag.
Sew Thankful
Ranger Archival Ink Pad - Leaf Green, RACP436
StazOn Ink Pad - Teal Blue, TSSZ63
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Jet Black, RACP468
3D Rose Shaping Mold, HCFB1-462
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Eyelet Circle & Basics Small Die, HCD1-7154
Eyelet Lace Frames Die, HCD2-7192
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Smooth White Cardstock, Sequence, Foam tape, Glossy Accents.
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: The ready top-fold card from white cardstock measures 8 1/4" by 5 3/4". To Create the top panel first choose all the papers from the designer paper collection. To start with, yellow printed panel measures 5'' by 7 1/2". Also cut a dotted blue panel of the same size, 5" by 7 1/2". Mark the center on the longer side, and 2 1/2" from the top right side and bottom right side. Chop the corners as shown. Layer both the panels with foam tape and adhere a white die cut from Eyelet Lace Frames Die in between the layers as shown. Add a layer of white cardstock and then a layer of blue pattern paper to the panel, slightly larger to the prior layer. Once all the layers are glued together, adhere the ready card panel to the card base.
Nest outer 2 dies from the Eyelet Circle & Basics Small Die and cut a frame out of white cardstock. Using second largest die from the same set, Cut a printed circle from 6' by 6' card base and light blue pattern paper and adhere to create a window base. To the window add a second smallest flower, painted with blue color Zig Clean Clear Marker and few shaker mix sequence. Close the window with circular acetate and glue another white frame on top.
To embellish the card stamp all the needed images from Buttons and Blooms Cling Stamp Set with black archival ink, cut them using their coordinating dies and paint them using Zig Clean Clear Brush Markers. Shape the flowers on needle tool and glue the flowers together as shown.
The leaves from Classic rose Collection are stamped with Olive green, painted using Leaf green and cut using it's coordinating die. Shape the leaves using Rose Shaping Mold. Once all the elements are ready, assemble the card as shown.
Thinking of You
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Designer Dries Clear Adhesive, 159723
Arrows and Banner Die, HCD1-7204
Album Tags and Accents Die, HCD1-7202
Furry-Tailed Frolic Die, HCD1-7197
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Card stock, white, yellow, blue, dark blue; Vellum; Ranger Distress Ink, Faded Jeans; Archival Ink Pad, Pale Ochre; VersaMark Watermark Stamp Pad; Ranger Embossing Powder, Antiquities Cobalt; ; Prismacolor Pencils; craft foam; glossy accents; Stickles, Diamond; seam binding, white; eyelash trim, blue; Memories dye ink pad, Midnight Blue; foam tape; stamp positioner
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Click here to view a larger photo of this project. Cut the outside tag die and the largest arrow from dark blue card stock. Cut the inside tag shape and the next size arrow from design paper. Also cut this arrow from craft foam. Adhere the tag shapes and arrow shapes together. Adhere the craft foam to the back of the arrow and add to the tag.
Stamp the pocket on design paper with Midnight Blue and cut with coordinating die. With a stamp positioner and Midnight Blue ink, stamp the top of the pocket over the design paper with the buttons. Die cut and add to the pocket. Add foam tape to the right side of the pocket and add to the tag.
Stamp the squirrel on white card stock and color with Prismacolor Pencils. Cut with coordinating die and add to tag. Stamp sentiment on vellum with VersaMark and emboss with Cobalt. Cut apart and add to tag as shown. Go around the edge of the vellum with Diamond Stickles.
Stamp the flowers and buttons on blue and yellow card stock, Pale Ochre on yellow and Faded Jeans on blue. Stamp the leaves on white card stock with Bamboo Leaves. Cut all with coordinating dies. Shape the leaves with the 3D Leafy Accents Shaping Mold. Add buttons to flower centers and add glossy accents.
Add the eyelash trim and seam binding to top of tag. Add a bow, all flowers and leaves, then add Diamond Stickles.
Special Birthday Wishes
Deluxe Flower Shaping Kit, HCST1-401
3-D Crystal Lacquer 4 oz, 3D1844
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Brilliance Ink - Sunflower Yellow, TSBL11
Brilliance Ink - Pearlescent Orchid, TSBL34
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Tiger Lily, RACP670
Pocket and Flipfold Inserts A - White, HCFP1-433-2
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201
Classic Border Basics Die, HCD1-7119
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: White card stock, embroidery floss, foam tape, Lime Brilliance, Orange Pearlescent Brilliance, Purple Brilliance, Copic Markers-YR14, V01, V12,RV04, YG03, YG17, Y15, lavender card stock
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Card size: 6 3/4 x 5". Cut a piece of blue plaid decorative paper to fit front of card. Use the curved pocket from the flipfold insert pack and cut it down to a height of 3 1/4" on the high side. Cut a white decorative border from the Elegant Borders. Cut a piece of yellow print from the decorative paper to fit the front of the pocket then glue it to the front and the border to the back of the pocket. Cut a rectangle of the same yellow paper 6 1/4 x at least 4" then use one of the rectangle dies from the Eyelet Rectangles to cut away the center, leaving a frame. Glue it to the front of the card and then glue the pocket to the front using the tabs on the sides. Add a dot of glue at the bottom to keep note card from slipping through. Die cut 8 corners from Album Tags and Accents out of white. Glue 2 of them to the top.
Stamp, sponge color and die cut 3 colors of flowers (small), pour Crystal Lacquer over the middle and let dry. Stamp, die cut and color the birthday wishes banner (also cut one from foam sheet, let sit over-night to regain its original shape and size). Glue the colored image to the foam sheet layer and then add enamel dots to centers of flowers. Stamp and die cut purple buttons and sponge color then add Crystal Lacquer and let dry. Later, pierce holes and thread with embroidery floss. Add buttons to 4 corners of pocket, 3 flowers to the right side and the birthday wishes to the left side of pocket. Front is finished.
Note card for the front pocket size: 4 1/4 x 5 1/2". Leave the back of the note card/tag blank to write a personal note. Cut a piece of quilted patchwork paper 4 1/8 x 5 3/8" and glue to the card/tag. Cut a white panel 4 3/4 x 3 1/2" then run it through the die cutting machine in an embossing folder. Glue it to the center and then make a thin frame with the rectangles from Hand-stitched Accent die, use the yellow print paper. Glue 4 white corners to the tag. Cut 2 tags from decorative paper using Tickets and tags and the Album Tags dies, glue them together and cut 2 lavender hole re-enforcers for each side. Add a lavender brad to each hole and purple floss to one side. Sponge adhesive over flowers on tag and sprinkle with glitter. Stamp quilt pieces using Tiger Lily, Sunflower, Magenta Hue, and Leaf Green. Arrange pieces over white embossed panel and glue down then glue die cut tags over the top. Note card/tag is finished, insert it into the curved pocket on the front of card.
Inside of card: Cut a piece of yellow print 6 1/2 x 4 3/4" and glue to the inside. Cut a strip of quilted decorative paper and glue to the top leaving a 1/4" yellow border. Make the short pocket from the flipfold inserts and cover with a piece of decorative paper 1 3/4 x 6". Glue 2 white corners to the bottom corners of pocket and glue tabs to card inside toward the bottom leaving 1/4" yellow border at the bottom. This pocket can be used for money or gift card. Add a button to the center of pocket. Cut out the "A Gift For You" tag from white and from decorative paper then glue to the center top of inside. Cut out another small tag from decorative paper, use another lavender hole re-enforcer and more purple floss to finish the tag. Glue it to the left side of "A Gift For You" to finish card.
Stitch by Stitch
Deluxe Flower Shaping Kit, HCST1-401
3-D Crystal Lacquer 4 oz, 3D1844
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Delicate Border Basics Die, HCD1-7118
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Buttons and Blooms Creative Essentials, HCCE1-641
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
ther Products: White card, Black memento ink, Clear embossing powder, versamark, Stampin Up inks:- Melon Mambo, Blueberry Bushel, Pumpkin Pie, Granny Apple Green, Crumb Cake. Kraft card, yellow embroidery thread, shaker foam strip, wet glue, hot glue
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Score a 7" x 11.5" piece of kraft card at 5.75" to create a 7" x 5.75" card base.
Select the backing paper from the pad and cut a piece slightly smaller than the base card. Edge with Crumb cake ink and adhere to the card base.
Cut a coordinating rectangle (4" x 5.25") from the pad and stamp the sentiment in the centre using black ink, cover with clear embossing powder, remove excess and heat to set. Edge the rectangle with crumb cake ink and adhere to the card base.
Die cut the large rectangle in kraft card and die cut the smaller rectangle inside this to make a frame. Stitch around the frame in yellow thread.
Die cut 2 Delicate borders in kraft card and cut to the width of the frame. Adhere to the card approximately .25" from the top and the other approx. .25" from the bottom. Add the frame using shaker foam.
Make the leaves: Stamp onto white card using black ink. Colour using granny apple green and crumb cake inks and die cut. Place face down onto the mold and spritz lightly with water. Place the top of the mold on the leaves and run through the diecutting machine to shape.
Make the flowers: Stamp the flowers onto white card using crumb cake ink. Colour using the blueberry bushel, Pumpkin pie and melon mambo inks, shading slightly darker where the pattern on the leaf changes. Diecut and shape by bending the petals up from the centre button and then flipping them back where the pattern changes. Add a shiny button using hot glue.
Make the buttons: Stamp the buttons on paper from the pad using black ink and die cut. Cover with 3D crystal lacquer and allow to dry.
Position the leaves, flowers and buttons onto the card using hot glue.
Paper Wishes
Rajni Chawla's Crystal Clear, PGM15015
3-D Crystal Lacquer 4 oz, 3D1844
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - French Ultramarine, RACP607
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Library Green, RACP475
Deluxe Flower Shaping Kit, HCST1-401
Album Tags and Accents Die, HCD1-7202
Eyelet Oval & Basics Large Die, HCD1-7157
Festive Holiday Die, HCD1-7146
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Hand-Stitched Accents Die, HCD1-7207
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Blue Crafter's Companion Pearlescent card, iCraft Super White cardstock, Foam Tape
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Cut a piece of white cardstock 8 1/2" x 5 1/2", score at 4 1/4" along the long side and fold to create a 4 1/4" x 5 1/2" base card. Die cut the decorative edge from the HCD1-7146 Festive Holiday Die set from blue cardstock. Cut a piece of blue patterned paper 4 1/4" x 5 1/2" and adhere the decorative edge behind the top of the paper and then adhere to the front of the card. Cut the panel from the paper pattern and die cut the centre oval out with the second size straight edge die from the HCD1-7157 Eyelet Ovals and Basics - Large die set. Adhere the frame to the front of the card using foam tape and then add the centre oval inside with Dries Clear glue. Die cut the frame from the HCD1-7207 Handstitched Accents Die set in white cardstock and adhere to the card front with foam tape.
Stamp the rose vine images from the HCPC-3834 Leafy Accents Stamp set in Library Green ink on white cardstock and colour in with Leaf Green and Fern Green inks before die cutting with the coordinating die. Shape using the coordinating mold. Add Crystal Clear glitter to the leaves using Dries Clear glue with a damp sponge. Adhere the leaves to the right side of the oval.
Stamp the flower images from the HCPC-3859 Buttons and Bloom Stamp set on the Super White cardstock in a variety of colours - Vibrant Pink, Forget-Me-Knot, and Buttercup. Colour the pink flowers lightly with Vibrant Fuchsia, blue flowers with French Ultramarine and the yellow flowers with Buttercup inks and die cut with the coordinating dies. Colour some of the blue flowers on the edges with Majestic Violet inks. Shape with the Deluxe Flower Shaping kit and add Crystal Clear using Dries Clear on a damp sponge.
Stamp the button images from the HCPC-3859 Buttons and Bloom Stamp set on white cardstock in a variety of colours - Vibrant Pink, Forget-Me-Knot, and Buttercup. Colour the pink buttons lightly with Vibrant Fuchsia, blue buttons with French Ultramarine and the yellow buttons with Buttercup ink and die cut with the coordinating dies. Adhere the buttons to the centres of the flowers and add 3D Crystal Lacquer.
Die cut the tag from the paper collection using the HCS1-7202 Ticket and Tags die set and adhere to the left of the oval as shown.
Happy Birthday
Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Olive, RACP482
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Jet Black, RACP468
Ticket and Tags Die, HCD1-7201
Album Tags and Accents Die, HCD1-7202
Eyelet Oval Die, HCD1-776
Small Sweet Peony Die, HCD1-7173
Small Sweet Peony Cling Stamp Set, HCPC-3819
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Die, HCD1-7205
Other Products: White cardstock, Clear Drying Glue, 3D Foam Tape, Pencil Colors, Archival Ink Cobalt, Buttons
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: The finished card measures 6 x 6". For the card base cut white cardstock 12 x 6", score at 6 from the longest side and fold.
Cut pattern paper from the paper collection 5-3/4 x 5-3/4" and adhere on the card base with clear drying glue.
Cut pattern paper using the second oval die from the Eyelet Oval Die and mat with white cardstock. Arrange it in the left hand side of the card with 3D foam tape. Stamp white cardstock using the pocket image from the Patchwork Pocket & Patterns Cling Stamp Set with Archival ink - jet Black and die cut using the coordinating die. Color the image using pencil colors. Die cut white cardstock using the border die from the Album Tags and Accents Die set and arrange it on the upper side of the pocket image. Die cut small tags from the paper collection using tag die from the Ticket and Tags Die set. Arrange them inside the pocket as shown.
Stamp white cardstock using Hand-Stitched Accents Cling Stamp Set with Archival ink - Jet Black and die cut using coordinating die. Color the image with pencil colors and arrange it on top of oval cutout with clear drying glue.
For flowers, stamp white cardstock with Buttons and Blooms Cling Stamp Set using Archival ink -Pink Peony. Die cut the images using the coordinating die. Color the flower petals using the Archival ink Pink Peony. For filler flower, stamp white cardstock with Small Sweet Peony Cling Stamp Set using Archival ink Cobalt and die cut using coordinating die.
Stamp white cardstock with Leafy Accents Cling Stamp Set using Archival ink - Library Green, die cut using coordinating die. Color the leaves using Archival ink - Olive and colorbox ink Olive Pastel. Shape the leaves using Leafy Accents Shaping Mold.
Arrange the flowers and leaves as shown. Apply glitter on the flowers with clear drying glue.
Buttons, Blooms and Gifts
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
3-D Crystal Lacquer 4 oz, 3D1844
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
3D Floral Basics Shaping Mold, HCFB1-464
Arrows and Banner Die, HCD1-7204
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Cardstock (White, Navy), White Tulle Ribbon, Ivory Burlap String, Green Pearls, ColorBox Ink (Sailboat, Green Apple, Seaweed, Candy), Distress Oxide Ink (Faded Jeans, Spiced Marmalade, Broken China), Scrapbook Adhesives by 3L (E-Z Runner Ultra, 3D Foam Squares, Adhesive Dots Mini)
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Click here to view a larger photo of this project. **Please note: My instructions are based on the dimensions of the chocolate bar I used. You will have to tweak measurements based on the dimensions of different bars.
Cut the white cardstock base to 7.25 x 11". Pick one end to start scoring from. Score at the 2.75" mark, go in 3/8" and score again, go in 2.75" score, 3/8" score and 2.75" again, score. There should be another little flap left. The paper for that leftover flap is to be cut to 1.75 x 7", from yellow patterned paper. The mini strips of paper for the sides are 0.25 x 7", you will need 2 from the polka dot patterned paper. All other sections are 2.5 x 7", 3 pieces of blue polka dot and one of light blue patterned paper. For all of this I used a good strong adhesive, my E-Z Runner Ultra. Adhere the narrow strips first, onto the outer sides. Cut a lengthy piece of the tulle ribbon and adhere it to the 2 outer sides of the paper, then add the patterned paper on top of the ribbon.
Find and die cut out one of the mini tags, add a bow of burlap string to the top and attach to that inside mini flap. Add the blue polka dot patterned paper to all of the other sections. I used glue dots to attach the chocolate bar to the cardstock.
Cut the button border strip down to 7" long and adhere across the front of the piece. Die cut "A Gift For You" from navy cardstock. Cut the decorative tag from white cardstock, and the slightly larger piece from navy cardstock. Adhere these layers together using 3D foam squares. Add green pearls as accents. Adhere to the front of the project using 3D Foam Squares.
Stamp and die cut 1 set of the medium flowers using Spiced Marmalade ink onto white cardstock. Add color to these images using the same ink and daubers. Stamp and die cut 1 set of the small flowers using Berrylicious ink onto white cardstock. Add color to these images using Candy ink and daubers. Stamp and die cut 1 of the swirly Leafy Accents using Seaweed ink onto white cardstock. Add color to these images using Green Apple ink. Shape all of these images using the 3D Floral Basics and 3D Leafy Accents Shaping Molds. Stamp and die cut a set of the buttons in Sailboat and Broken China. Add liquid adhesive on top of the chosen buttons and let dry for a shiny dimensional look.
Assemble the flowers and add a button to the middle of each. Adhere to the card using Adhesive Dots. Add the leaves in pieces around the flowers, again using Adhesive Dots. Tie the gift card using the tulle ribbon and your gift is complete.
Rosie Pockets
Ranger Archival Ink Pad - Jet Black, RACP468
Memento Dye Ink Pad - Danube Blue, TSMP600
ColorBox Fluid Chalk Ink Pad - Black Cherry, 71080
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
3-D Crystal Lacquer 4 oz, 3D1844
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Just For You Sentiments Cling Stamp Set, HCPC-3845
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Fleur Border Basics Die, HCD1-7120
3D Floral Basics Shaping Mold, HCFB1-464
Botanical Wings Die, HCD1-758
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Raffia, seam binding ribbon, gingham ribbon, purple cardstock
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Create a card base 7 x 5.5 inches in white cardstock. Cut a slightly smaller piece of purple cardstock, top with a slightly smaller piece of blue paper from the Buttons and Blooms Paper Collection and cut a piece slightly smaller than that from the yellow and blue paper. Cut the top of the yellow and blue piece off with the Fleur Border Basics Die and cut out the scalloped border from the same set in white cardstock. Adhere the scalloped edge to the top of the yellow piece and adhere all the layers, leaving the yellow piece open on the top as a pocket. Cut out two of the lacey corners from the Album Tags and Accents Die and adhere one to each corner as shown in photo.
Stamp buttons from the Buttons and Blooms set in black, cut out with coordinating dies and sponge with Black Cherry inks. Cut out extra buttons with the Buttons and Blooms Die and glue multiple layers together to give the buttons a realistic thickness. Sponge the sides with ink and cover the buttons with 3D Crystal Lacquer.
To create the flowers, stamp the Botanical Roses in Black Cherry and sponge the centers with Bamboo Leaves and the rest with Black Cherry, cut out with corresponding dies and sponge edges with same. Sculpt with the 3D Floral Shaping Mold. Add Crystal Clear glitter.
Stamp, and sponge leaves from the Leafy Accents set in Bamboo Leaves, cut out with corresponding dies and sculpt with the 3D Leafy Accents Shaping Mold.
Stamp the pocket from the Patchwork Pockets and Patterns set in Danube Blue, cut out with coordinating die and sponge with same ink. Adhere the pocket on the left side with foam dots and add a large button.
Cut out the With Love sentiment tag from the paper collection with the Tickets and Tags Die, cut out the blue tag with flowers from the paper collection with the Ornamental Tags Die. Attach the two tags with gingham ribbon and place in the stamped pocket. Cut out the largest tag with the Album Tags and Accents Die in Dark Blue paper and the second largest in the blue plaid paper. Stamp the sentiment from the Just For You Sentiments Set in black on the small yellow and blue print from the paper pad and cut out with the Album Tags and Accents Dies and cut out the scalloped frame from the same set in white. Adhere all the layers of the tag together, add buttons and rose as shown in photo.
Stamp the Thinking of You sentiment from the Hand-Stitched Accents set in black on white cardstock and cut out with the Ornamental Tag Die. Cut out a frame in blue paper from the paper pad.
Adhere leaves, sentiment and flowers as shown in photo.
Sew Fascinating
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Buttercup, RACP632
Memento Dye Ink Pad - Teal Zeal, TSMP602
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Hand-Stitched Accents Die, HCD1-7207
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Other Products: 3d foam pads, Brown Cardstock, Cutting machine, Scor tape, Black fine liner, Glue gun, Sewing needles, Brads, Flat back pearls, Safety pin, Lace, Paperclip, Scissor, Distress tool, Silver marker, Embroidery Twine, Seam binding
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Take a 12 x 12" brown cardstock for the base, then take a paper from the paper Collection and cut it smaller than the cardstock and make the edges rough with a distress tool. On the above right side just make a cut and pull the distresser over it too then curl the 2 flaps, put the safety pin through it and ink all the edges with Rich Cocoa. Now glue or tape it on the brown Cardstock, do some doodling on the edges off the paper with the Black Fine liner. Cut another piece from the paper collection at 11 x 4 1/2" and place this 1 inch from the bottom and glue this down and put a brad on 3 corners.
Mat your Photo on a piece of cardstock and place this on top of the design paper, a little bit over it. Stamp with the Tuxedo black and the pocket stamp on design paper and cut it out with the coordinating die, glue 3 sides of it and place that next to the photo, then you have a pocket.
Take the same color of your photo mat and use the label from the Hand stitched accent die set, stamp also with the black some Buttons, cut them out with the Button die and color them with the Buttercup Ink, then put some 3D Crystal Lacquer on them and let them dry. Then glue them on the label and place the label in the pocket, color the needle with the silver marker and put a piece of Twine through the button and place the button on the pocket with a 3D foam pad. Place the box with sewing needles on the bottom part of the photo. Place also 3 small buttons on the left side of the Safety pin. Place a little piece of lace behind the tear you made. Stamp with the Patchwork patterns stamp and the Tuxedo Black ink on the White cardstock and color it with the Teal Zeal, cut them out with the coordinating die, place 3D foam pads behind them and stick them on the top right side of the photo. Cut a piece of the design paper of 4 x1 1/4" and fold it over the straight part of the paperclip, then cut out a stamp from the collection and glue this on top, make a bow with the seam binding on the top of the paperclip and stick this on the left corner of your layout.
Stamp with Rhubarb Stalk and the Oak berry Blossom stamp on White Cardstock and cut them out with the coordinating dies, then color them with New Sprout in the middle and on the ends with Buttercup on the petals, put them up side down in the 3D mold and mist them very lightly with water, (you can put 3 layers in if you want) put the top on the mold and run it through the machine, Now glue 1 on top of the stamp on the paperclip and put a pearl in it.
Stamp with Tuxedo Black and the Buttons and Blooms stamps on White cardstock, color them with the Buttercup, Teal Zeal and Cactus Flower and cut them out with the connected dies, place them wherever you like on the layout, on some of them you can glue some of the flowers, finish them off with some pearls. The word Buttons is from the strip of the paper collection.
Wherever I Go
Circle Basics Large Die, HCD1-7155
Patchwork Pocket & Patterns Die, HCD1-7206
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Hand-Stitched Accents Die, HCD1-7207
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Words Of Comfort Cling Stamp Set, HCPC-3815
Pins Kit, PIN6
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
5pc. Acrylic Block Set, SUAH05
Stamp Mat Pad, D110305
Other Products: Flatback Pearl, Distress Oxide Salty Ocean, Distress Seedless Grape, Zig Clean Color Pens, Stickles Disco Ball glitter
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: Score a piece of white cardstock to 7.5 x 5.5" then cut your patterned paper to 5.25 x 7.25" to adhere to your card front.
Using the largest of the Large Circle Die set, diecut blue patterned paper from the collection. Adhere to the center of the card front. Stamp the sentiment on white cardstock using Distress Oxide Salty Ocean. Diecut using the second largest die from the Large Circle Die set keeping the sentiment to side of the circle. Diecut the rick rack from the paper collection and adhere to the other side of the white center circle.
Take your buttons and blooms stamp using VersaMark ink and stamp onto your watercolor paper using Stazon Fuschia Pink and Yellow ink. Once done, diecut and color using Zig Clean Color pens in yellow and pink. Now add some stickles disco ball glitter. For the centers add your flatback pearls.
For the purple flowers: stamp, color and diecut your small classic rose using distress ink in seedless grape. Add some disco ball glitter to give it some sparkle and pearls to the centers.
Adhere the flowers to the side as shown.
Patchwork Patterns
Patchwork Pocket & Patterns Die, HCD1-7206
Patchwork Pocket & Patterns Cling Stamp Set, HCPC-3850
Hand-Stitched Accents Die, HCD1-7207
Hand-Stitched Accents Cling Stamp Set, HCPC-3851
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Ornamental Tags Die, HCD1-7203
Eyelet Lace Frames Die, HCD2-7192
Ranger Archival Ink Pad - Rose Madder, RACP638
Deluxe Flower Shaping Kit, HCST1-401
Funnel Tray, 359503
Double Dots 100pc. -3D Foam Circles, DDOTS
Stack and Store Daubers-Pack of 30, HCDA2-450
Designer Dries Clear Adhesive, 159723
Other Products: White cardstock. Big Shot machine.
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
Instructions: Card size 7.75"x 6" (final size). Take pattern paper from the Buttons and Blooms Collection and adhere it on the card base.
Cut one Eyelet Lace frames Die on white cardstock and adhere it on the card base as shown.
Cut One stitched decorative frame from Hand-Stitched Accents Die on white cardstock and adhere it with foam tape.
Stamp two hand stitched zig zag patterns from Patchwork Pocket & Patterns Cling Stamp Set with archival ink-paradise teal and cut them with matching die and distress the edges with same ink. Adhere with foam tape as shown. Stamp some small decorative patches with archival ink-paradise teal and vibrant fuchsia and cut them matching die and distress the edges with same ink and adhere them as shown.
Stamp some flowers and buttons from Buttons and Blooms with archival ink-Sunflower, Paradise Teal, Vibrant Fuchsia and cut them with matching die. Color them with same ink on the edges of the petals and shape the flowers with Deluxe flower shaping tool kit. Paste buttons at the centre of the flowers and arrange these flowers as shown.
Now add sentiment from Ornamental Tags Die "A Gift For You". Cut this die on white cardstock and one on pattern paper and arrange them as shown.
A Hug for You
Heat It Craft Tool, RAHT
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
Ranger Archival Ink Pad - Olive, RACP482
Rajni Chawla's Crystal Clear, PGM15015
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Spellbinders Tool N' One, 359848
Scor-Pal Measuring & Scoring Board, 173842
Funnel Tray, 359503
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Cut Mat Create 2A Die, HCD2-751
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Patchwork Pocket & Patterns Die, HCD1-7206
Buttons and Blooms Die, HCD1-7205
Buttons and Blooms Paper Collection, HCDP1-295
Buttons and Blooms Cling Stamp Set, HCPC-3849
Other Products: Hot Glue Gun, Sponge, Misti, Big Shot Plus, Scissor, Ranger Archival Ink Pad-Cobalt, Yellow Cardstock, Dark Pink Cardstock, Blue Cardstock, Sparkle Sheer Shimmer Spritz, Dimensional dots,
For more tips on creating with the Buttons and Blooms collection, watch the tutorial at https://youtu.be/WpR2XrSH0U0.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Card is 6 x 6". Score and fold 12 x 6 white cardstock at 6" on the long side. Cut a 6 x 6" card front from the paper collection, ink the edges with cobalt blue ink and adhere to the card base using dries clear adhesive. Cut coordinating 6 x 6" panel from the paper collection, trim to 5 5/8 x 5 5/8", ink the edges and adhere to the inside of the card. Using the Cut Mat Create 2A die, cut out the center of the card front and ink around the edges of the aperture.
Stamp the Patchwork Pocket on yellow cardstock using cobalt blue archival ink and diecut using the coordinating die. Adhere to the card base as shown using dimensional dots. Stamp the buttons on white cardstock using cobalt blue and berrylicious inks, diecut using the coordinating die and spray with Sparkle Sheer Shimmer Spritz.
Stamp the Leafy Accents leaves on white cardstock using Archival Olive ink, color with the same ink and berrylicious ink, diecut using the coordinating dies and shape using the Leafy Accents Mold. Sponge with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear glitter.
Stamp the blue blooms from the Buttons and Blooms stamp set on blue cardstock using Archival Cobalt Blue ink. Stamp the pink blooms on dark pink cardstock using ColorBox Berrylicious ink. Diecut using the coordinating die, shape using the Deluxe Flower Shaping Kit and spray with Sparkle Sheer Shimmer Spritz. Add the diecut buttons to the flower centers and the pocket using a dimensional dot.
Adhere the leaves and flowers to the card base as shown using a hot glue gun.
Cut the sentiment from the paper collection, lightly curve and adhere to the card base using dries clear adhesive.
You Are Special
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Assorted Bead Stamens-Medium, HCS1-459-3
Just For You Sentiments Cling Stamp Set, HCPC-3845
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: White Cardstock, Diamond Stickles, Purple Sheer Ribbon, Distress Peeled Paint, Distress Aged Mahogany, Memento Grape Jelly, Brilliance Pearlescent Lavender
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.
Instructions: Cut your white card base 12" x 12", fold in half and use a bone folder for a cleaner line. Trim the front right-hand side down by 1 1/2" so that the front flap is 4 1/2". Cut your desired mats from your Oakberry Paper Collection to 5 3/4" x 5 3/4", one front mat and one contrasting mat for the insert, trim off a 1/4" strip from the right-hand side from the front mat. Adhere your front mat. Adhere you insert mat and then adhere your strip to the right hand inside so that it lines up with your front mat.
Using your Album tags and Accents Die, die cut one purple eyelet background mat using the same cardstock as your insert, and cut 1 white matching die cut for your sentiment. Stamp with your "hope your day is as special as you are" sentiment using Memento Espresso Truffle. Adhere together using 3D dots.
Using your Oakberry Lane Blossoms stamp set, stamp your flowers using Memento Grape Jelly Ink and color with Brilliance Pearlescent Lavender, highlight the edges with the grape jelly ink, shape in your 3D Mold and add desired white wired stamens to the flower centers. Leave the wire attached and curl your wire. To curl wire wrap around a skewer or similar sized object and slide off to create the spiraled wire. I have used 3 flowers for the main flower and 2 flowers for the smaller flowers.
Using your Oakberry Lane Stamp set, stamp your leaves using Memento Espresso Truffle and color using Peeled Paint ink, die cut with coordinating die and highlight edges with Distress Aged Mahogany Ink.
Using your ornamental tags die set, cut the flourish tag and trim off the solid section so you are left with the flourish.
Assemble your card - Adhere your decorative sentiment mat flat on the front of your card so that it is hanging over the right-hand side. Line up the flourish and adhere to the insert on the outer edge on the matching floral strip so as it looks part of your sentiment mat.
Adhere your flowers and leaves and arrange your curled wires. Tie a bow and place at the top of your sentiment. Decorate with stickles as desired.
Simply Beautiful
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Rajni Chawla's Crystal Clear, PGM15015
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Darice Adhesive Foam Strips, D120601
Art Foam Paper-10 Pack, HCFS1-465
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Assorted Bead Stamens-Medium, HCS1-459-3
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
O Holy Night Paper Collection, HCDP1-292
Noel Ornament Die, HCD1-7188
Other Products: 3D foam tape, hot glue gun, string, white glitter paper, glass stones
For more tips on creating with the O Holy Night collection, watch the tutorial at https://youtu.be/UWDeK6soJ0E.
Instructions: Click here to view a larger photo of this project. Using Noel Ornament Die, cut with bigger die base twice, glue it together; using smaller die, cut twice from O Holy Night Paper Collection and place using Darice Adhesive Foam Strips, cut fancy ornament from white glitter paper and place using Darice Adhesive Foam Strips. Attach to the base of card using Darice Adhesive Foam Strips.
Create the pine needles: stamp Snowy Pine Village Cling Stamp with Ranger Archival Ink Pad - Sepia, and color using Memento Dye Ink Pad - Bamboo Leaves and cut using the coordinating dies. Using paint brush, paint with Designer Dries Clear Adhesive and sprinkle Rajni Chawla's Frosting Powder
Create flowers: stamp on the Art foam Paper - Oakberry Lane Blossoms Cling Stamp Set a few times using Ranger Archival Ink Pad - Garden Patina and cut using the coordinating dies. Colour using Ranger Archival Ink Pad - Garden Patina and StazOn Ink Pad - Olive Green.
Use a heat gun to heat the petals and then shape using tool from Deluxe Flower Shaping Kit by the pressing down using small ball tool in the middle of flower. Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the green stamens from the assorted Bead Stamens-Medium set. Add a little hot glue to the underside of the flower to adhere. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Frosting Powder. Take prepared earlier pine needles and using hot glue put this together.
Decorate ornament with the flowers and leaves as shown, glue them using a hot glue gun.