Blog Menu

Elegant Inspiration + a Buttons and Blooms Sneak Peek

Print Blog Save This Post to My Library


Hey Friends,

How is your week going....Can you believe it's October already? With the holidays right around the corner, do you need to get back into your craft room and create something pretty? If yes, you're in the right spot! The creativity featured below from design team members all across the globe, will knock your socks right out of the park and you'll be inspired to create your next one of a kind masterpiece that you and your friends will love!

Celebrate World Cardmaking Day: Get a FREE 3D Shaping Mold with a $125.00 purchase! Enter code 97687 at checkout. Save on your favorite Paper Pads and get them for only $19.99. Discount applies automatically. Valid until October 6th, 2018. Get yours now: https://www.heartfeltcreations.us/shop/3d-shaping-molds


Button and Blooms Preview: Learn more about the Buttons and Blooms Collection here: http://hcgo.co/ButtonsandBlooms . Beautiful floral fabric, delicate trimmings and charming buttons accompanied by delicate hand-stitch work, and precise patchwork become a most exquisite project in the hands of an experienced seamstress! While sewing may not be a talent gifted to everyone, you can now experience the same stunning results in your paper crafts with our new Buttons and Blooms Collection! Debuting worldwide on October 10th, 2018

Have a beautiful day and have fun creating something beautiful for your friends and family! Hugs, Emma Lou P.S.

Are you a Platinum member? If not, find out how you can save an extra 20% on all your purchases here: http://hcgo.co/Platinum


"Love, love, love Heartfelt Creation Stamps and Dies. The stamps are always crisp and having matching dies saves fussy cutting. They take cardmaking to the WOW level." -Sharon H
"I was very happy with the prompt service from Heartfelt Creations. The products are very easy to use and help to make beautiful cards. Thank You." -Mary W




Creative Inspiration of the Week

Feel Better Soon

Feel Better Soon
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Glue Tip Pins, PIN6
Nuvo Crystal Drops - Gloss White, NU651
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Rock Candy Stamens-Small, HCS1-459-4
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Emerald Green, RACP447
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Manganese Blue, RACP454
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Groove Golf Tool Set, DMCT4185
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Furry-Tailed Frolic Die, HCD1-7197
3D Blossoms Shaping Mold, HCFB1-469
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Arrows and Banner Die, HCD1-7204
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201

Other Products: Soft Suede and White cardstock, foam dots,

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Prepare a 6 x 6" Soft Suede card base and add a piece of the Oakberry Lane paper on top 1/4 inch smaller. Locate the card front and sentiment from the paper pack and cut those out to use later.

Use the dies from the Album Tags and Accents, Ticket & Tags and Arrows & Banner sets and cut those out from the Soft Suede card stock. For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.  Stamp the sentiment on the card front, layer it on a piece of the Soft suede cardstock and adhere to card. Add the pre-stamped sentiment from the paper collection to the top. Locate and cut out the pre-colored Squirrel and add foam dots to the back, adhere to the card.

Stamp the flowers on white cardstock with the Manganese Blue, lightly color in with the Forget Me not, shape the flowers with the flower mold, build your flower by putting 2 together, use the golf tool set and poke a hole in the center and add the stamens.

Stamp the leaves on white cardstock with the Library Green ink, lightly color in with the Leaf Green, run through the die cut machine with the mold to shape the leaves, ink the edges with the Emerald Green and adhere to card.

Add flowers on top of the leaves. To finish, add White Crystal drops to the side and glitter to the leaves and flowers.

Created by: Olga Jewell

Print Project

A Speedy Recovery

A Speedy Recovery
Products Used
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Bright Pearl Stamens-Small, HCS1-458-1
Ranger Archival Ink Pad - Jet Black, RACP468
Intricate Swirl Frames Die, HCD2-7191
Nuvo Crystal Drops Gloss - Caribbean Ocean , NU670
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
3D Blossoms Shaping Mold, HCFB1-469

Other Products: Card stock, white; 90# watercolor paper; Ranger Distress Ink, Broken China, Wild Honey; Ranger Distress Oxide, Worn Lipstick; VersaFine ink pad, Smokey Grey; Stickles, Diamond; Prismacolor watercolor pencils; Tattered Angels glimmer mist, Party Pink; Tim Holtz Rays Layering Stencil; pop dots; ribbon; hot glue; foam tape

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white card stock 10" x 7", fold in half. Cut a piece of blue from the design paper 6 7/8" x 4 7/8", adhere to card front with Designer Dries Clear Adhesive. Die cut Intricate Swirl Frame from white card stock. Adhere to card.

Cut a piece of white card stock 5 7/8" x 3 7/8". Place stencil on paper and spray with Party Pink. Adhere to card. Stamp flower from Oakberry Lane Antics stamp set on watercolor paper with Smokey Grey. Color with watercolor pencils. Die cut. Add pop dots to the center of the flower and add to card.

Stamp flowers from the Oakberry Lane Blossoms stamp set on white card stock with Broken China, Wild Honey and Worn Lipstick. Stamp leaves with Bamboo Leaves. Die cut. Shape with 3D Blossoms Shaping Mold. Create 7 small single layer flowers, adding stamens. To create 3 medium flowers, use 2 medium and 1 small layers. Add stamens. Create 1 large flower with 2 large layers, 1 medium, and 1 small layer. Add stamens. Adhere layers together with Designer Dries Clear Glue. Add Diamond Stickles around the edges. Use 3 leaves. Arrange as shown with hot glue and add ribbon.

Cut a piece of blue design paper 2 7/8" x 1". Add foam tape. Stamp sentiment from the Oakberry Cottage & Sentiments stamp set on white card stock with Jet Black and then cut to 2 3/4" x 7/8", add foam tape and add to blue piece. Add Diamond Stickles to edge of sentiment. Add entire piece to right side of card. Add Nuvo crystal drops, Caribbean Ocean to sentiment.

Created by: Sarah Miller

Print Project

My Everyday Moments

My Everyday Moments
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
3-D Crystal Lacquer, 3D1844
Tombow Dual Brush Marker N00 Blender, 282873
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Lady Bug, TSMP300
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Woodsy Wonderland Cling Stamp Set, HCPC-3767
Woodsy Wonderland Die, HCD1-7123
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Leaf Green, RACP436
Nuvo Crystal Drops Gloss - Sweet Lilac, NU668
Nuvo Crystal Drops - Ivory Seashell , NU675
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Cottage Die, HCD1-7198
Furry-Tailed Frolic Die, HCD1-7197

Other Products: This cutting file at the Silhouette store, Blue/green Cardstock, Paper Cutter, Cutting machine, Big Shot, Foam pads.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Click here to view a larger photo of this project. Take the file from the Silhouette store and cut it out in the color you like, put it together by folding all the score lines and glue them as the instructions tell you. Take The Acorn House stamp from the Oak berry Cottage stamp set and stamp it with Tuxedo Black on White Cardstock. Color the stamp with a mix of toffee Crunch and Rich Cocoa, cut the acorn out with the coordinating die and also the squirrel inside of the house, put her on 3D foam squares to pop her up, color her also with the Rich Cocoa and her apron with lady Bug. Put some Ivory Shells Nuvo drops on the cakes, On the glass of the windows you can put some 3D Crystal lacquer and let that dry.Cut a piece of the paper pad with a background and glue this on the back of the card like a background for the house, then glue the house in front of that on the slider flap that pops up when you pull the ribbon.

Now stamp the flowers and grasses from the woodsy wonderland with the Black tuxedo on white cardstock and color them with the mix of the greens, yellows, lavender and the brush marker, or the colors you like for the flowers, then cut them out with the coordinating dies and arrange them in front of the house on 3D foam pads to make more depth. Important to keep it only on the small flap otherwise it won't slide anymore!!!

Stamp the standing squirrel of the furry tailed set with Black Tuxedo on White cardstock and color it with the Rich Cocoa, then cut it out with the coordinating die and place it on a foam pad in front of the greenery. Take the sentiment from the Oak berry Cottage set and stamp it with the Black Tuxedo on the card. Take the Lavender Nuvo drops and put some on the Flowers and in the front. Take a sentiment from the paper collection and put it on foam pads and tape it on the bottom of the card.

Created by: Els Schutte

Print Project

With All My Love

With All My Love
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Rock Candy Stamens-Small, HCS1-459-4
Bridal Bouquet Stamens-Small, HCS1-460
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Cactus Flower, RACP985
Intricate Swirl Frames Die, HCD2-7191
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Ornamental Tags Die, HCD1-7203

Other Products: White cardstock, distress ink- seedless preserves, dry grass.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take white cardstock size 4" x 12" and fold it to 4" x 6" (tent fold card). Cut one large frame die from Intricate Swirl Frames Die on white cardstock and adhere it on the card base as shown.

Cut one white cardstock size 3.375" x 5.375" and create background with distress ink-seedless preserves. Adhere some dry grass.

Cut one Intricate Swirl Frames Die from white cardstock and adhere it with Designer Dries Clear Adhesive, as shown. Cut one Ornamental Tags die and add sentiment from Cheerful Note Sentiments Cling Stamp "with all my love" with archival ink-jet black and adhere them with foam tape at the centre of the card as shown.

Stamp some blossoms and leaves from Oakberry Lane Blossoms Cling Stamp Set with archival ink-violet, red carnation, fern green and cut with the matching die and color them with archival ink-cactus flower and leaf green and shape them with 3D Blossoms Shaping Mold. Add stamens at the centre of the flower, and then add some crystal clear glitter.

Now arrange these leaves and flowers as shown.

Created by: Shalini Pahwa

Print Project

Special Birthday Love

Special Birthday Love
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Darice Adhesive Foam Strips, D120601
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die, HCD1-7129
Flowering Dogwood Paper Collection, HCDP1-275
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Leaf Green, RACP436
Leafy Accents Die, HCD1-7193
3D Leafy Accents Shaping Mold, HCFB1-467
Groove Golf Tool Set, DMCT4185
Leafy Accents Cling Stamp Set, HCPC-3835
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202

Other Products: Floral Oriental paper from Dress My craft for flowers, White card stock, Scoring board, Peeled Paint and Vintage Photo distress ink. Ribbon, Twine, pearls, Rainbow Glitter powder from Dress My Craft, Clear Water droplets, eyelet, crop-a-dile.

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Cut two tag die cuts using the bigger tag die from the Albums Tags and Accents die in white card stock. Cut a mat layer using the smaller tag die using a pattern paper from the Dogwood paper pad and another one from white card stock. Adhere the pattern paper die cut to one of the base tags using clear glue. On the second mat layer tag, Score at 1/8 inch intervals on the scoring board. Distress all over with Peeled paint. Distress all the edges of all die cuts with Vintage Photo ink. For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Using the label diecut, from white card stock cut the mat layer of this label. Cut out two die cuts from white card stock using both the base and mat die cut so that we get a frame. Adhere the two frames together.

On the white base layer label, stamp the special birthday sentiment. Distress all over with vintage photo. Adhere on the scored tag layer. Adhere the frame on the mat tag layer.

Stamp many images of dogwood flower with Vibrant Fuchsia. Color the edges with same color using sponge dauber. Shape the flowers using the groove golf tool. Color the flower centre with yellow color. Add two layers together and add a stamen to form the flower. Make leaves using green ink and leafy accents stamp, die and mold.

Arrange all the flowers and leaves on the top scored tag as shown in the picture. Add an eyelet using crop-a-dile, joining the two tags. Add ribbon and twine with pearls.

Cut two tiny tags and stamp sentiment on top. Distress with Vintage photo. Add the twine. Finish with clear water droplets and glitter powder.

Created by: Anita Kejriwal

Print Project

The Lord's Unfailing Love

The Lord's Unfailing Love
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Bright Ideas Prills - 12 Pack, ANC852
Memento Dye Ink Pad - Lilac Posies, TSMP501
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Courage and Strength Cling Stamp Set, HCPC-3763
Stack and Store Daubers-Pack of 30, HCDA2-450
Eyelet Lace Frames Die, HCD2-7192
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469

Other Products: Neenah Paper White Cardstock, Silver Metallic Cardstock, Silk Pink Ribbon, Spellbinders Platinum Die Cutting Machine.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 5 1/4" x 7 1/4" card base using silver metallic cardstock. Cut 2 smaller rectangles using Oakberry Lane Paper Collection, layer on card base.

Die cut Eyelet Lace Frame from silver metallic cardstock, adhere to card base with Designer Dries Clear Adhesive. Stamp sentiment in the center of frame using black Memento ink.

Stamp Oakberry Lane Blossoms on white cardstock with pink Memento Ink, die cut with coordinating Oakberry Lane Blossoms Die. Color flowers with Memento Inks and Stack and Store Daubers and then shape with Blossoms Shaping Mold. Embellish the center of flowers with green Prills.

Adhere flowers and ribbon to card as pictured.

Created by: Marisa Job

Print Project

This is My Best Day Ever

This is My Best Day Ever
Products Used
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
Decorative Medallion Die, HCD1-7144
Rock Candy Stamens-Small, HCS1-459-4
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Tiger Lily, RACP670
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Plum, RACP499
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Cottage Die, HCD1-7198
3D Blossoms Shaping Mold, HCFB1-469

Other Products: White Cardstock, Pencil Colors, 3D foam Tape, Clear Dry Glue, Resin Frame, Acrylic Colors, Green Moss, Dry moss, Canvas For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Take a canvas of size 4 x 6", cut pattern paper 3 3/4 x 5 3/4" and adhere to the canvas with clear drying glue.

Roughly hand tear a few pieces of pattern paper and arrange them on the right hand side of the canvas randomly with 3D foam tape.

Frame the squirrel image from the paper collection using the resin frame. For coloring the resin frame use acrylic colors. Stamp white cardstock with the acorn images from the Oakberry Cottage & Sentiments Cling Stamp Set and cut using coordinating die. Color the images with pencil colors.

Arrange resin frame in the center of the canvas with 3D foam tape. Die cut white cardstock using Decorative Medallion Die and adhere underneath upper right side of the frame.

For the flowers stamp white cardstock with Oakberry Lane Blossoms Cling Stamp Set using Archival Ink -Plum. Die cut using the coordinating die and color the petals with Archival ink Cactus Flower and Lily. Make sure to color both sides of the petals. Shape the flowers using 3D Blossoms Shaping Mold.

For leaves stamp white cardstock with Oak berry Lane Blossoms Cling Stamp Set using Archival Ink - Library Green. Die cut using the coordinating die. Color the petals using Archival Ink Pad - Olive and ColorBox Fluid Ink Pad Olive Pastel

Arrange flowers around the resin frame and fill up the space between flowers with green and dry moss.

Cut out sentiment from the paper collection and arrange in the corner of the canvas.

Created by: Pavitra Chanchal

Print Project

Wildflowers and Kisses

Wildflowers and Kisses
Products Used
Designer Dries Clear Adhesive, 159723
Lettuce Entertain You Prills, ANC814
Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Tea Rose, RACP663
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Heart of Gold Prills, ANC804
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Cottage Die, HCD1-7198
3D Blossoms Shaping Mold, HCFB1-469
Album Tags and Accents Die, HCD1-7202

Other Products: Clear plastic pillow box, Hershey's Chocolates, iCraft Flower Shaping Cardstock

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Click here to view a larger photo of this project. Cut a piece of purple patterned paper 12" x 5" and using the lace edge die from the HCD1-7202 Album Tags and Accents Die set cut a lace edge on both edges of the paper. Cut a piece of patterned paper 12" x 3" and adhere to the centre of the purple patterned paper. Adhere around the pillow box.

Stamp the leaves from the HCPC-3842 Oakberry Lane Blossoms stamp set in Library Green ink on flower shaping cardstock, colour in with Fern Green, Leaf Green inks and Rose Madder inks before die cutting with the coordinating die. Shape using the coordinating mold and assemble when dry and add Crystal Clear glitter with Dries Clear glue. Adhere on the band and the front of the card base as shown.

Stamp the flowers from the HCPC-3842 Oakberry Lane Blossoms stamp set in Majestic Violet and Rose Madder inks on white flower making cardstock and die cut with the coordinating dies. Sponge the outer edges of the purple flowers with Majestic Violet ink and the middle of the flowers with Vivid Chartreuse ink and the pink flower edge with Rose Madder ink and the centres with Sunflower ink and shape using the coordinating mold. Assemble when dry and add Crystal Clear glitter to the flowers and the Lettuce Entertain You Prills to the centres of the purple flowers and Heart of Gold prills to the centres of the pink flowers. Adhere the flowers to the leaves as shown.

Stamp the acorns from the HCPC-3840 Oakberry Cottage & Sentiments Stamp set in Coffee ink on white cardstock and colour with Coffee ink. Die cut with the coordinating die, shape and adhere among the leaves and flowers as shown.

Die cut the small tag from the HCD1-7202 Album Tags and Accents Die set from the patterned paper and nestle it among the flowers.

Created by: Patricia Manhire

Print Project

Life is Better

Life is Better
Products Used
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Festive Holiday Die, HCD1-7146
Intricate Swirl Frames Die, HCD2-7191
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
Oakberry Cottage Die, HCD1-7198
Furry-Tailed Frolic Die, HCD1-7197
3D Blossoms Shaping Mold, HCFB1-469
Album Tags and Accents Die, HCD1-7202

Other Products: Card stock, white; vellum; VersaMark Watermark pad; Recollections embossing powder, Clear Gold; VersaFine, Smokey Gray; Ranger Distress Oxide, Abandoned Coral; StazOn, Saddle Brown; Prismacolor Pencils; brads, green; seam binding; Micro Beads, clear, gold, peach; craft foam

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: From white card stock, cut a piece 5" x 7", fold in half. Die cut Intricate Swirl Frame, Festive Holiday and label from Album Tags & Accents Die from white card stock. Wipe VersaMark pad around edge of frame and emboss with Clear Gold. Add to card front with craft foam. Add Festive Holiday die cut. Stamp sentiment on label with Bamboo Leaves. Edge label with Clear Gold, add green brads. Add craft foam to back of label and add to card.

Stamp large flower on white card stock with Smokey Grey and color with Prismacolor pencils. Stamp again on vellum and emboss with Clear Gold. Die cut with coordinating die. Adhere vellum image to colored image in center. Stamp acorns and squirrel on white card stock with Saddle Brown. Color with pencils. Die cut and add to flower. Using Dries Clear Adhesive, add seed beads to center of flower. Stamp leaves with Bamboo Leaves and flowers with Abandoned Coral and shape with 3D Blossom Shaping Mold. Add seed beads to center of flowers.

Add bow, leaves and small flowers to lower right corner.

Created by: Sarah Miller

Print Project

Spread Your Wings

Spread Your Wings
Products Used
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Sweetheart Borders Die, HCD1-7161
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Library Green, RACP475
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Album Tags and Accents Die, HCD1-7202

Other Products: White Cardstock, ColorBox Ink (Berrylicious, Dandelion, Kiwi, Apple Green), Beads, Burlap String, Chameleon Pens (Vermillion RD3, Warm Sunset YO3), Lace, Burlap Ribbon, Edge Distresser, Scrapbook Adhesives by 3L (Crafty Foam Tape, Adhesive Dots Mini, Adhesive Dots Medium, Extreme Double Sided Tape 1/8", Dual Tip Glue Pen, E-Z Runner Grand)

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: The polka dot patterned paper is the background, but cut a 2" piece from one side and attach it to the other side so that none of the printed flowers are shown. Cut a strip of the wood grain stripe that is about 7" wide. Cut 2 strips of white cardstock that are 2 x12". Distress the edges of these pieces. Die cut the large scalloped circle and the small scalloped circle from white cardstock. Adhere the large scalloped circle, burlap ribbon and lace across the layout using Extreme Double Sided Tape. Adhere the large border strip of wood grain with the white strips on the edges. Add 2 of the Sweetheart Border Die cut from white cardstock to the left-hand edge of the pattern.

Using the coordinating Album Tags and Accents die to cut out the large floral tag. Cut the coordinating scalloped piece from white cardstock and adhere these together. Cut this in half. Mat the 4 x 6" photo in white cardstock, coral patterned paper and white cardstock again. Distress all of the edges. Adhere to the layout using crafty foam tape. Add a piece of the decorative tag to the top and bottom of the matted photo. Add the small scalloped circle to the right of the matted photo. Find and cut out the 2 sentiments "A Time to Remember" and "Spread Your Wings and Fly". Add these to the left of the matted photo using crafty foam tape.

Stamp and die cut 1 set of the largest Oakberry Blossoms, 2 sets of the medium and 1 set of the small using Coffee Archival Ink onto white cardstock. Each finished flower is created using 2 die cut flowers. Add color to the yellow flowers using Chameleon Pens (Vermillion RD3 and Warm Sunset YO3). Add color to the coral flowers using the same pens only reverse the colors. Add color to the pink flowers using ink and daubers (ColorBox Berrylicious, Dandelion).

Stamp and die cut 4 of the leaf images using Archival Ink Library Green onto white cardstock. Add color using ink and daubers (ColorBox Kiwi, Apple Green). Shape all of the flowers and leaves using the 3D Blossoms Shaping Mold.

Assemble the layered flowers. Add beads to the middle of each using liquid adhesive. Let dry. Create burlap string loops, one cluster a little larger than the other. Adhere the smaller one to the top right of the matted photo and the other to the bottom left corner of the matted photo. Add the flowers across the layout and then add the leaves.

Created by: Tracy McLennon

Print Project

Just Sayin' Hello

Just Sayin' Hello
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Dove Blender Kit, 241159
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
ColorBox Fluid Chalk Ink Pad - Rouge, 71015
Deluxe Flower Shaping Kit, HCST1-401
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Majestic Violet, RACP494
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Die, HCD1-7199

Other Products: White Cardstock, Ornate Lace Embossing Folder, Dimensional Tape

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: My Card is 5 x 7". Make card base and cover with a piece from the paper collection. cut a piece of white cardstock and emboss it with the folder and adhere to the card front. Cut another piece of the paper collection and glue down onto the embossed piece. Stamp the sentiment onto this piece of the paper using the Tuxedo Black Memento Ink.

Stamp the flower cluster and berries twice. Using Majestic Violet Archival Ink and the Dove Blender Pen to color the berries. Use a dauber and Bamboo Leaves Memento Ink to color the leaves. On the second cluster, cut out only the flower. I snipped the petals in between and shaped them a bit using the Deluxe Flower Shaping Kit then adhered using the Dimensional Tape.

Glue down the medallion to the bottom of the card and it is ready to go. This one will mail in an envelope for less expensive postage.

Created by: Glenda Brooks

Print Project

Thoughts and Prayers

Thoughts and Prayers
Products Used
Deluxe Flower Shaping Kit, HCST1-401
Classic Wedding Paper Collection, HCDP1-279
Eyelet Oval & Basics Small Die, HCD1-7156
Assorted Pearl Stamens-Small, HCS1-459-1
Art Foam Paper-10 Pack, HCFS1-465
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848

Other Products: Archival Ink - Magenta Hue, Archival Ink - Deep Purple, White card, pearls, clear embossing powder, black ink, foam pads, hot glue

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Score a 12" x 7.5" piece of white card at 6" to give a 7.5" x 6" card base.

Select and cut a 7" x 5.5" paper and a 6" x 4.5" paper, edge the smaller piece lightly with Magenta Hue archival ink and layer both onto the card base.

Stamp the leaves in black onto co-ordinating paper and diecut. Spritz the back of the leaves and shape using the flower shaping kit.

Stamp the sentiment in Deep purple archival ink onto white card, cover in clear embossing powder, remove excess and heat to set. Die cut the sentiment using an oval from the basic small die set and edge in magenta due ink. Adhere to the card using foam pads.

Add pearls to the smallest layer on the card to compliment the pattern on the paper.

To make the flowers: Stamp the Oakberry Blooms on Art Foam Paper in Deep Purple and die cut. Add Magenta Hue ink to the back of the flower and around the edges of the front. Heat the flowers and shape whilst hot, use two of the larger blooms for each flower. Add additional ink if required to the edges. Pierce a hole through the centre of 2 blooms and thread 3 double stamens into the centre of the flower, use a hot glue gun to secure and trim the excess wires from the bottom of the flowers.

Position the leaves and flowers onto the card using a hot glue gun.

Created by: Cheryl Morgan

Print Project

Say It With Glitter

Say It With Glitter
Products Used
Hydra Sponges, RLHS100
Funnel Tray, 359503
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Spellbinders Tool N' One, 359848
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Heat It Craft Tool, RAHT
Assorted Pearl Stamens-Small, HCS1-459-1
Assorted Pearl Stamens-Medium, HCS1-459-2
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Magenta Hue, RACP614
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Cactus Flower, RACP985
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469
Just For You Sentiments Cling Stamp Set, HCPC-3845
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201

Other Products: Misti, Dimensional Dots, Hot Glue Gun, Water Spritzer, Distress Crackle paint, Paint brush, Ribbon from my stash, Swarovski crystals, SU Melon Mambo cardstock, floral cardstock, Crop-A-Dile

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Card size is 6 1/4 x 4 1/4". Score 8 1/2 x 6 1/4" white cardstock on the long side at 4 1/4" and fold to create card base.

Outside of Card: Cut melon mambo cardstock 6 1/8 x 4 1/8" and adhere to the card base using dries clear adhesive. Cut a 4 x 6" panel from the Oakberry Lane paper collection, ink the edges with Magenta Hue ink and adhere to the card base. Die cut the decorative tag from the Album Tags and Accents Die from white cardstock. Diecut the inside plain edge from paper from the collection, ink the edges and adhere to decorative diecut. Diecut a frame using the two dies together from white cardstock, sponge with dries clear adhesive, sprinkle with Crystal ultrafine transparent glitter and adhere to the decorative tag. Adhere decorative tag to card base using dimensional dots. Diecut the "A Gift For You" three times from white cardstock using the Ornamental Tags Die, adhere together, sponge with dries clear adhesive, sprinkle with crystal transparent glitter and adhere to the decorative tag. Adhere Swarovski crystals as shown.

Stamp the Oakberry Lane Blossoms on Floral Cardstock using Archival Cactus Flower ink and color with Archival Magenta Hue ink. Stamp the Leafy Accents on white floral cardstock using Archival Olive Ink, color using Archival Leaf Green and Olive inks and diecut the blossoms and leaves using the coordinating dies. Place the flowers and leaves in the 3D Blossom Mold face down, spritz with water and run through the die cutting machine to shape. Finish off the blossoms by using the stylus from the deluxe flower shaping kit to press down in the middle. Adhere the flower petals together using dries clear adhesive. Use two petals the same size for the small blossoms and three petals for the medium and larger blossoms. (Use two the same size and one smaller.) Pierce the centers, insert the stamens and adhere the stamens using hot glue gun. Using a paintbrush, paint the flowers and leaves with Distress Crackle paint and sprinkle with Rajni Chawla's Crystal Clear glitter. Adhere the blossoms and leaves to the card base as shown using the hot glue gun. Use the Heat It tool to shrink any glue strings.

Inside of Card: Cut a piece of melon mambo cardstock 6 1/8 x 4 1/8" and adhere to inside of card. Create a pocket by cutting white cardstock 2 3/4 x 6 1/16", diecut the top edge using the eyelet edge die from the Classic Borders die, add dries clear adhesive along the bottom and the two side edges and adhere as shown. Diecut paper from the collection using the plain edge Classics Borders die, ink the edges with Magenta Hue ink and adhere to the pocket. Diecut a tag from the paper collection using the Tickets and Tags die, ink the edges and stamp the sentiment. Diecut a mat layer from melon mambo cardstock and adhere the tag. Using a crop-a-dile, punch a hole in the tag and add an eyelet. Add ribbon as shown.

Created by: Janet Saieva

Print Project

All Boxed Up

All Boxed Up
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Lettuce Entertain You Prills, ANC814
Delicate Border Basics Die, HCD1-7118
Rajni Chawla's Crystal Clear, PGM15015
Rock Candy Stamens-Small, HCS1-459-4
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac Die, HCD1-7170
3D Lush Lilac Shaping Mold, HCFB1-466
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Cactus Flower, RACP985
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
3D Blossoms Shaping Mold, HCFB1-469

Other Products: Paper Mache 4 x 6" box, pearls, lace, Luminaire acrylic paint-violet/gold, purple Brilliance

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view a larger photo of this project. Paint corners and edges of box with acrylic paint and cover inside and out with decorative paper, leave sides of lid without paper. Wrap the lid sides with lace. Cut a card panel from the decorative paper to match the box colors. Add green decorative paper then glue both to the purple paper top. Glue pearls to the lid top around the edges and then around the green. Cut border from green decorative paper. Stamp sentiment using Deep Purple.

Stamp Blossoms with Deep Purple and leaves with Fern Green, sponge blossoms with Leaf Green and Purple Brilliance, sponge leaves with Leaf Green, sponge lilacs with Cactus Flower and Deep Purple. Die cut flowers and leaves, then use Shaping Molds to shape. Insert Rock Candy Stamen into Oakberry Blossoms and glue Prills in the centers of Lilac. Glue green borders to sides and add pearls. Glue leaves and flowers to top left side. Add glitter. Glue green pearls to the lace sides.

Created by: Robin Clendenning

Print Project

Furry Fun

Furry Fun
Products Used
Designer Dries Clear Adhesive, 159723
Butterfly Medley Die, HCD1-759
Butterfly Medley Cling Stamp Set, HCPC-3650
Deluxe Flower Shaping Kit, HCST1-401
ColorBox Pigment Ink Pad - Frost White, CB80
Embossing Powder - White, RPEJ685
Woodsy Treescape Cling Stamp Set, HCPC-3766
Woodsy Landscape Die, HCD1-7122
Stack and Store Daubers-Pack of 30, HCDA2-450
StazOn Ink Pad - Fuchsia Pink, TSSZ82
Lush Lilac Cling Stamp Set, HCPC-3816
Lush Lilac Die, HCD1-7170
Ranger Archival Ink Pad - Jet Black, RACP468
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Die, HCD1-7199
Oakberry Cottage Die, HCD1-7198
Furry-Tailed Frolic Die, HCD1-7197
Arrows and Banner Die, HCD1-7204
Album Tags and Accents Die, HCD1-7202
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002

Other Products: Smooth white cardstock, Zig Clean Clear Brush Markers, Heat gun, Score-board, Papericious Twinkling Spark

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: The ready top-fold card from white cardstock measures, 5 1/2" by 9". To create the window, choose a deep purple paper from the designer paper collection and cut it measuring, 5" by 8 1/2". Tape down the tag die from Album Tags and Accents Die Set on left-hand side leaving an equal 1/2" margin on left, top and bottom. Run the panel through a die cutting machine to create a tag window. Choose another paper from the same collection and layer it to form a window. Layer the window panel on white cardstock having a border of 1/8" on all sides. Further layer the panel on the ready card base.

Stamp the images from Oakberry Lane Antics Cling Stamp Set and Furry-tailed Frolic Cling Stamp Set with black archival ink and cut them using their coordinating dies. Color all the images using Zig Clean Clear Brush Markers. For the Oakberry flower cluster, Hanging squirrel and the acorns, paint the images in layers and shape them a little using Deluxe Flower Shaping Kit. Also stamp, cut and paint a few leaves from Woodsy Wonderland Collection.

Lilacs are white heat embossed on Vellum cardstock using white color box ink and white heat embossing power and then cut using it's coordinating die. Color the flowers using Seedless Preserves Distress Oxide, shape a little with hands and add glitter balls. The butterfly from Butterfly Medley Collection is also white heat embossed on vellum.

Once all the elements are ready, assemble the card as shown and add twinkling spark on the edges of the tag window. Finish the card by adding a sentiment from the same collection. The sentiment is stamped with StazOn Ink Pad - Fuchsia Pink and cut with the smallest banner die.

Created by: Rajni Chawla

Print Project

I'm Bloomin' Nuts About You

I'm Bloomin' Nuts About You
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Deluxe Flower Shaping Kit, HCST1-401
Assorted Bead Stamens-Medium, HCS1-459-3
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
Furry-Tailed Frolic Die, HCD1-7197
3D Blossoms Shaping Mold, HCFB1-469
Album Tags and Accents Die, HCD1-7202

Other Products: White Cardstock, Diamond Stickles, Glossy Accents, Copic Markers - E50, E51, E31, E33, R20 critters, E71, E50 Nut, G21 leaves.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut your white card base 5 1/2" x 8 1/2", fold in half and use a bone folder for a cleaner line. Cut your desired mat from your Oakberry Paper Collection and adhere to your card front.

Using your Album tags and Accents Die, die cut one white eyelet background and using the paper collection cut one coordinating purple. Adhere together.

Using your Oakberry Lane Antics die, cut one large purple flower from your paper collection or alternately stamp your flower and color and cut with coordinating die.

Using your Oakberry Lane Blossoms stamp set, stamp the small flower using Memento Grape Jelly Ink and color with Brilliance Pearlescent Lavender, highlight the edges with the grape jelly ink, shape in your 3D Mold and add one white wired stamen to the flower center. Leave the wire attached and curl you wire. To curl wire wrap around a skewer or similar sized object and slide off to create the spiraled wire.

Using your Furry-tailed stamp set, stamp your critter using Memento Espresso Truffle, color with the listed copics or your pen or pencil of choice and cut with coordinating die. Stamp your sentiment on white 3/4" x 4 1/2" wide strip and cut the left-hand side to a tail and trim to fit under your critter.

Assemble your card - Using 3D dots, adhere your purple and white die cut. Adhere your large flower. Using 3D adhesive adhere your sentiment and then using 3D dots adhere your critter so it lines up with the edge of the sentiment. Adhere your shaped blossom. Decorate with stickles and glossy accents as desired.

Created by: Tracy Crane

Print Project

Oakberry Wishes

Oakberry Wishes
Products Used
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
ColorBox Fluid Chalk Ink Pad - Concord, 71083
Rajni Chawla's Crystal Clear, PGM15015
Rock Candy Stamens-Small, HCS1-459-4
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Olive, RACP482
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Cottage Die, HCD1-7198
Furry-Tailed Frolic Die, HCD1-7197
3D Blossoms Shaping Mold, HCFB1-469
Arrows and Banner Die, HCD1-7204
Ornamental Tags Die, HCD1-7203

Other Products: White Cardstock, Pencil Colors, 3D foam Tape, Clear Drying Glue, Gold Mirror Cardstock, Double sided tape

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: The finished card measures 7 x 9". For the base of the card cut white cardstock 14 x 9", score at 7" from the longest side and fold. Next cut Gold mirror cardstock 6 3/4 x 8 3/4" and adhere on top of card base with clear drying glue.

Cut pattern paper of your choose from the paper collection and cut to size 6 1/2 x 8 1/2", distress the edges and layer on top of gold mirror cardstock with double sided tape.

Cut next layer of pattern paper 6 1/4 x 8 1/4" and adhere on first layer of pattern paper.

Die cut Pattern paper using tag die and gold mirror cardstock with corner dies from the Album Tags and Accents Die set, mat with white cardstock. Die cut Gold mirror cardstock with the Arrows and Banner Die.

Stamp white cardstock with the images using Furry Tailed Frolic Cling Stamp Set and Oakberry Cottage & Sentiments Cling Stamp Set. Die cut with coordinating dies and color the images with pencil colors.

For the flowers stamp white cardstock with Oakberry Lane Blossoms Cling Stamp Set using Colorbox Fluid Chalk Ink Pad - Concord. Die cut using the coordinating die and color the petals with the same ink. Make sure to color both sides of the petals. Shape the flowers using 3D Blossoms Shaping Mold.

For leaves stamp white cardstock with Oak berry Lane Blossoms Cling Stamp Set using Archival Ink - Library Green. Die cut using the coordinating die. Color the petals using Archival Ink Pad - Olive and ColorBox Fluid Ink Pad Olive Pastel

Once all the elements are ready arrange them as shown. Apply Clear glitter on flowers with clear drying glue.

Created by: Pavitra Chanchal

Print Project

Cheery Sunflowers

Cheery Sunflowers
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
3-D Crystal Lacquer, 3D1844
Classic Sunflower Cling Stamp Set, HCPC-3626
Classic Sunflower Die, HCD1-753
Delightful Daisies Cling Stamp Set, HCPC-3656
Delightful Daisy Die, HCD1-760
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
ColorBox Fluid Chalk Ink Pad - Butter, 71079
Express-O Yourself Prills, ANC829
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Rajni Chawla's Crystal Clear, PGM15015
3D Floral Basics Shaping Mold, HCFB1-464
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Buttercup, RACP632
Sweet as Honey Cling Stamp Set, HCPC-3831
Sweet as Honey Paper Collection, HCDP1-291
Sweet as Honey Die, HCD1-7185
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Arrows and Banner Die, HCD1-7204

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Sweet as Honey collection, watch the tutorial at https://youtu.be/89nlTDw3kOE.

Instructions: Cut your card base from white card stock, card measures 5.5 x 5.5", cut a frame from medium blue paper from the Sweet as Honey Paper Collection, cut a piece from the paper collection with the bees and honey comb, slightly smaller than the blue frame. Cut out the honey comb with the die from the Sweet as Honey Die set in the orange paper from the Sweet as Honey Paper collection and cover with 3D Crystal Lacquer. Cut honeycomb paper with same die so you can see darker blue paper beneath. When lacquer is dry, adhere honeycomb die cut on top of paper as shown.

Stamp bees from the Sweet as Honey Cling Stamp set in black, cut out with coordinating dies and sponge with Buttercup and Butter inks, add a touch of Forget-Me-Not to the edges of the wings. Cover the wings with 3D Crystal Lacquer.

To create the flowers, stamp the Sunflowers from the Classic Sunflower set in Butter and sponge with Buttercup, cut out with corresponding dies, and sponge edges with Butter. Use 3D Floral Basics Shaping mold to sculpt flowers, see video for details on the Shaping Molds. Create the centers using Espress-O Yourself prills.

Stamp, and sponge leaves from the Delightful Daisy set in Bamboo Leaves, cut out with corresponding dies.

Stamp sentiment from the Cheerful Notes Sentiment set in black and cut out with the Arrows and Banners Die. 

Adhere flowers, leaves, bees and sentiment as shown.

Created by: Darla Rants

Print Project

Perfectly Sweet

Perfectly Sweet
Products Used
Cut Mat Create 2A Die, HCD2-751
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Rain Boots and Blossoms Die, HCD1-7169
Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Cactus Flower, RACP985
Frame a Card Leafy Borders Die, HCD2-7190
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
Furry-Tailed Frolic Die, HCD1-7197
Ornamental Tags Die, HCD1-7203
Ticket and Tags Die, HCD1-7201

Other Products: White cardstock wobbles, zig markers, The Secret Garden flower making paper, gold shimmer card stock, white satin cord, green moss

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions: Ready top side fold card measures 7" x 7". To prepare the card mat choose a pattern paper from the designer paper collection and cut a piece measuring 6 7/8" x6 7/8". Layer it on the ready card base. Create a shadow box measuring 6"x 6" using Cut Mat Create 2A die. Choose 2 card panels from the same collection, one for window scene and another for window frame. Layer the mats on the shadow box. Cut 2 tags from the same collection using Ornamental Tags die and glue them on the left side of the card. Glue the shadow box on the card base.

Cut gold shimmer cardstock using Frame a Card Leafy Borders die. Glue the borders on the shadow box as shown. Stamp the squirrel images from the Furry-Tailed Frolic stamp and Oakberry Lane Antics on the water color paper using sepia archival ink. Color the images using zig markers and cut with coordinating die. Arrange the images on the shadow box using wobbles as shown.

Stamp the Oakberry Lane Blossoms flowers on the flower making paper using cactus flower ink and deep purple ink. Color the flowers using same ink and cut with coordinating die. Shape the flowers using flower shaping mold. Stamp the leaves using olive green ink and color them with leaf green and olive green ink, cut the leaves with coordinating die and slightly shape them using deluxe flower shaping kit.

Arrange the flowers and leaves on the card using hot melted glue as shown. Cut white cardstock using Tickets and Tags die, also cut a sentiment strip from the same collection. Arrange the sentiment on the card as shown.

Choose a pattern paper from the same collection and create two paper tassels. Arrange the tassels on the card using satin cord. For the finished look apply sparkling dust on the flowers using adhesive that dries clear.

Created by: Uma Didwania

Print Project

Fun in the Forest

Fun in the Forest
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Crystal Ultrafine Transparent Glitter, 85-glitter
Woodsy Treescape Cling Stamp Set, HCPC-3766
Woodsy Critters Cling Stamp Set, HCPC-3768
Woodsy Landscape Die, HCD1-7122
Woodsy Critters Die, HCD1-7124
Darice Adhesive Foam Strips, D120601
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
StazOn Ink Pad - Olive Green, TSSZ51
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Garden Patina, RACP992
Ranger Archival Ink Pad - Leaf Green, RACP436
Snowy Pine Village Cling Stamp Set, HCPC-3837
Snowy Pine Village Die, HCD1-7195
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Die, HCD1-7199
Furry-Tailed Frolic Die, HCD1-7197

Other Products: Shadow box with a window, moss

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Put 6x6 shadow box together. Select background paper from Oakberry Lane Paper Collection and cut to inside size of box, 4 1/2" x 4 1/2" and glue it.

Select forest creatures (squirrel, rabbit, deer) from collections and stamp onto white paper using Ranger Archival Ink Pad - Coffee. Cut out using the coordinating dies, shadow using Ranger Archival Ink Pad - Coffee and Ranger Archival Ink Pad - Sepia. Sponge with Designer Dries Clear and sprinkle Rajni Chawla's Frosting Powder and Crystal Clear.

Select different types of trees and stamp into white paper using StazOn Ink Pad - Olive Green, Cut out using the coordinating dies. Shadow with StazOn Ink Pad - Olive Green, Ranger Archival Ink Pad - Leaf Green, Ranger Archival Ink Pad - Sepia, Ranger Archival Ink Pad - Coffee.

Starting from the top, glue the elements in the shadow box using 3D Foam Circles and Adhesive Foam Strips layer by layer, adding trees and forest creatures. Add some moss to decorate.

Created by: Ewelina Panka

Print Project

A Better Life

A Better Life
Products Used
5pc. Acrylic Block Set, SUAH05
Stamp Mat Pad, D110305
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Glue Tip Pins, PIN6
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Paper Collection, HCDP1-294
Furry-Tailed Frolic Die, HCD1-7197
Album Tags and Accents Die, HCD1-7202

Other Products: Gold Foil, Chipboard, Glue Gun, Watercolor paper, Hybrid ink, Foam, Zig Clean Color pens, Sequins

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Score a piece of white cardstock to 3.75 x 4.75". Once done, cut the patterned paper to cover your card front.

Take your squirrel stamp/die set and stamp onto watercolor paper using black hybrid ink. Once complete, color your image using zig clean color pens. Now diecut another image using the foam. Adhere your stamped image onto the foam for added height.

Diecut the circle eyelet from the furry-tailed frolic stamp set using the gold foil. Diecut the mat circle using white cardstock. Stamp your sentiment onto the white cardstock circle and affix it to the front of your card. Adhere heart sequins as shown.

Diecut the eyelet border from your album tags and accent die set using gold foil paper which you will glue to the side of your card for added decor.

Created by: Monica Edwards

Print Project

Comments

Comments Policy



LINDA ROGERS
Oh my goodness Emma Lou! You all just keep on keepin' on. Just when I think there is nothing left to come up with, Here you come again! How precious is this new Collection coming up!! The designs are so amazing. I absolutely love love your work so very much!! May God continue to bless your and your family.
Wednesday 3rd of October 2018 09:28 AM
MARTIE ROLLIN
Love the sunflower card and the decorated box...can't pick a favorite!
Wednesday 3rd of October 2018 11:14 PM
PAULETTE THOMAS
felt so inspired by these outstanding cards,tags and mixed media projects! would love to help with samples! Thank you for such an inspiring art from the heart!
Thursday 4th of October 2018 07:07 PM