Debuting Elegant Tags and Sentiments
Hi Friend,
Good morning, how is your week going? Elegant tag dies and sentiment stamps are one of the most used tools in the craft room, and it's every crafters desire to have a well-rounded collection. This one of a kind collection provides you with a selection of greetings paired with matching designer tags, to make the perfect sentiment for your handmade cards and gifts. These dies and stamps are a wonderful way to adorn special gifts, tuck into pockets of greeting cards, and are the main staples for the craft room and will always stand the test of time.
Special Savings: The Elegant Tags and Sentiments Bundle has a 10% discount, only available until September 29th or while supplies last! Your new collection will arrive packaged in a transparent zipper bag with hot pink trim, great for keeping organized. Get yours today to ensure that you don't miss out on this special savings!
Our Crafters Say:
"These tags and corresponding sentiments will really come in handy during the Christmas season! I can see how versatile these will be for gift bags, making a window in bags, creating lanterns: the possibilities are endless! I am excited to see the new papers that you will have to compliment these stamps & dies! Fantastic, just like always HC!" -Liz Ford
"This is a must have collection! The sentiment are a much needed addition to the HC lineup and cover so many occasions with just the right thoughts and words. The array of dies in this collection can be used not only for gift tags, but also card making, scrapbooking and mini albums. This is truly a go to set for all paper crafters." -Candy Slabaugh
The design team members are showcasing many different ways to use the Elegant Tags & Sentiments along with a video to learn the EZ tips add the finishing accents to your cards using these tags and sentiments.
Happy Crafting, Emma Lou
P.S. Are you a Platinum member? If not, find out how you can SAVE an extra 20% on all your purchases here: http://hcgo.co/Platinum
Watch this video to learn the EZ steps to add elegant sentiments and tags to your cards.
Creative Inspiration of the Week
You Are the World to Me
Ranger Archival Ink Pad - Coffee, RACP451
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
For My Friend Sentiments Cling Stamp Set, HCPC-3844
3D Blossoms Shaping Mold, HCFB1-469
Furry-Tailed Frolic Die, HCD1-7197
Oakberry Cottage Die, HCD1-7198
Oakberry Lane Blossoms Die, HCD1-7200
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Other Products: Cardstock (White, Kraft), Corrugated Cardboard 12x12, Chameleon Pens (Bark BR5, Hot Cocoa BR2, Warm Sunset YO3), Burlap String, Beads, ColorBox Ink (Kiwi, Green Apple, Dandelion), 5/8" Circle Punch, Scrapbook Adhesives by 3L (Creative Photo Corners- Kraft, Dual Tip Glue Pen, Crafty Foam Tape, 3D Foam Squares, Adhesive Dots Mini, Adhesive Dots Medium, E-Z Runner Grand)
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: The dark purple patterned paper is your background. Cut white cardstock to 12 x 10" and adhere to the middle of the layout. Cut 2 strips of striped patterned paper that are 0.5 x 12" and adhere to the top and bottom of the white cardstock. Using the decorative ornamental tag, cut the largest from white cardstock and the smaller from dark orange patterned paper. Adhere these together and cut it in half. Adhere to the top and bottom of the layout using crafty foam tape. Using the nesting arrow/flags die cut lots of pieces in all of the sizes from a variety of patterned papers and colors. Adhere them across the middle of the layout, pop-up the smaller flags that are on top.
Die cut the corrugated cardboard using the largest tag die. Cut the next smaller die from white cardstock. Using a small circle punch, cut out a small orange patterned circle. Adhere to the top of the layered tag. Punch a hole in the top and add a bow of burlap string. Adhere to the layout using Crafty Foam Tape. Add the cropped photo to the layered large tag using photo corners.Stamp the "To the world..." sentiment onto white cardstock and die cut around it using the double ended ornamental tag. Mat this in craft cardstock and add a burlap string bow to each end. Adhere to the layout using craft foam tape.
Stamp and die cut 1 set of the small Oakberry Blossom, 1 set of the medium and 1 set of the large using dark brown ink (Archival- Coffee) onto white cardstock. Add color to the flowers using ink and daubers (Dandelion). Stamp and die cut 2 sets of leaves using dark brown ink onto white cardstock. Add color to the leaves using ink and daubers (Green Apple, Kiwi). Shape the flowers and leaves using the 3D shaping mold. Assemble the layered flowers and using a liquid adhesive add beads to the middle of each flower. Let dry. Add color to the squirrel using the Hot Cocoa Chameleon Pen. Add color to the acorn using Chameleon Pens (Warm Sunset, Bark, Hot Cocoa).
Adhere the large and medium flower to the right of the matted photo. Add the 2 small flowers to the orange patterned paper tags. Add the squirrel below the bottom small flower. Add the leaves around the flowers. Adhere the acorn next to the sentiment tag.
For My Friend
Rajni Chawla's Crystal Clear, PGM15015
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201
Oakberry Lane Paper Collection, HCDP1-294
Card Shadow Box Set-Kraft, HCBC1-456-3
Classic Rose Vines Die, HCD1-7111
Classic Rose Vines Cling Stamp Set, HCPC-3753
Pastel Bead Stamens-Medium, HCS1-457-3
3D Rose Shaping Mold, HCFB1-462
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Other Products: 3D foam tape, Green alcohol based ink, Waterproof red ink, hot glue gun, pink pigment ink
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.
Instructions: Click here to view a larger photo of this project. Diecut from Oakberry Lane Paper Collection and white cardstock, using tag die from Album Tags and Accents Die using both sizes. Adhere the larger one to white paper and two others on both sides of tag. Cut one tag using smaller die and using Ornamental Tags Die create a tag, cut the bottom with the lade edge. Place on tag using 3d foam tape. Cut out sentiment using combination white and collection paper as shown and place using 3d tape.
To create flowers Stamp the Classic Rose Cling Stamp Set on paper with waterproof red ink and cut using the coordinating dies. Colour with pink pigment ink. You will need two petals for each flower to create flowers. Sponge the petals with dries clear adhesive and sprinkle with Ultrafine transparent glitter. Use the 3D Rose Shaping Mold to shape flowers. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Layer the petals together using the hot glue gun making sure to offset them. Use a paper piercer to make a hole in the middle and pull through the stamens from the set. Add a little hot glue to the underside of the flower to adhere.
Stamp the leaves using Leafy Accents Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade using the same ink and shape. Shape leaves using Leafy Accents Shaping Mold. Adhere the flowers and leaves using a hot glue gun.
Sponge the petals with dries clear adhesive around card and sprinkle with Rajni Chawla's Crystal Clear glitter.
Let's Celebrate You
Lettuce Entertain You Prills, ANC814
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Heart of Gold Prills, ANC804
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Tea Rose, RACP663
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Fern Green, RACP962
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Just For You Sentiments Cling Stamp Set, HCPC-3845
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Ornamental Tags Die, HCD1-7203
Ticket and Tags Die, HCD1-7201
Classic Border Basics Die, HCD1-7119
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Paper Collection, HCDP1-294
Furry-Tailed Frolic Die, HCD1-7197
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: American Crafts green cardstock, Green chevron ribbon, Colorbox Bisque ink
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: For more detailed photos please visit here: https://wp.me/p2MuRN-1bM.
Cut a piece of white cardstock at 6" x 12", score at 3" x 9" and fold to create a gatefold card. Die cut the edge from the HCD1-7202 Album Tags and Accents Die set in green cardstock and adhere to the inside edges of both. Cut two pieces of the striped paper 6" x 6" and cut down the centres and adhere to the front and backs of the side folds.
Front - Die cut the large eyelet rectangle from the HCD2-7189 Eyelet Lace Frame die set in green cardstock and adhere to the centre of the card adhering on the left side. Using the next size down plain die cut the patterned paper and stamp the image from the HCPC-3843 Special Birthday Sentiments Stamp set in Tuxedo Black ink using a stamp positioner and adhere to the front of the rectangle.
Inside - Die cut the outer and inner frames from the HCD1-7203 Ornamental Tags Die set in green cardstock. Die cut the sentiment out of green cardstock and adhere to the frame. Die cut two lace corners from HCD1-7202 Album Tags and Accents Die set in green cardstock and adhere to each end of the frame. Adhere to the back of the card aligning the sentiment to the top edge of the card. Cut a piece of patterned paper 6" x 5 15/16" inch and adhere to the back of the card. Cut a piece of coordinating paper 5 15/16" x 4" and die cut the edge using the plain edge die from the HCD1-7119 Classic Border Basics set and then die cut an eyelet edge from the HCD1-7119 Classic Border Basics set from green cardstock and adhere it behind the patterned paper. Adhere the pocket to the back of the card on the bottom and side edges only.
Die cut the larger tag die from green cardstock and the smaller tags from the patterned paper from the HCD1-7201 Ticket and Tags Die set. Adhere them together and die cut the small hole protectors from green cardstock and adhere around the holes. Stamp the sentiments from the HCPC-3845 Just for You Sentiments Stamp set in Tuxedo Black ink and finish with some green grosgrain ribbon. Place the tags in the pocket.
Belly Band - Cut a strip of green cardstock 3" x 12" and using the lace edge die from the HCD1-7202 Album Tags and Accents Die set cut the edges. Cut a piece of green patterned paper 1 1/2" x 12" and adhere around the centre of the green strip. Cut a piece of striped purple paper 1 1/4" x 12" and adhere to the centre of the band. Fold around the card leaving enough room to slide up and down the card. There will be a gap, but this will be covered with the sentiment frame. Die cut the eyelet label frame from the HCD1-7203 Ornamental Tags Die set in green cardstock and the coordinating label from the patterned paper. Die cut the inner frame from the frame set in green cardstock and adhere to the label. Die cut the A Gift for You sentiment from the HCD1-7203 Ornamental Tags Die set In purple paper and adhere to the front of the label.
Stamp the leaves from the HCPC-3842 Oakberry Lane Blossoms stamp set in Library Green ink on flower shaping cardstock, colour in with Fern Green, Leaf Green and Rose Madder inks before die cutting with the coordinating die. Shape using the coordinating mold and assemble when dry and add Crystal Clear glitter with Dries Clear glue. Adhere on the belly band and the front of the card base as shown.
Stamp the flowers from the HCPC-3842 Oakberry Lane Blossoms stamp set in Majestic Violet and Rose Madder inks on white flower making cardstock and die cut with the coordinating dies. Sponge the outer edges of the purple flowers with Majestic Violet ink and the middle of the flowers with Vivid Chartreuse ink and the pink flower edge with Rose Madder ink and the centres with Sunflower ink and shape using the coordinating mold. Assemble when dry and add Crystal Clear glitter to the flowers and the Lettuce Entertain You Prills to the centres of the purple flowers and Heart of Gold prills to the centres of the pink flowers.
Add the pink and purple flowers around the band as shown and nestle the leaves around them. Stamp the squirrel images from the HCPC-3830 Furry-Tailed Frolics stamp set in Sepia ink on white cardstock. Colour with Bisque and Sepia ink and die cut with the coordinating dies. Nestle the squirrel reaching out above the flowers at the bottom right of the belly band.
A Time to Remember
Bright Pearl Stamens-Small, HCS1-458-1
Pastel Bead Stamens-Medium, HCS1-457-3
Album Tags and Accents Die, HCD1-7202
Arrows and Banner Die, HCD1-7204
Ticket and Tags Die, HCD1-7201
Ornamental Tags Die, HCD1-7203
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Just For You Sentiments Cling Stamp Set, HCPC-3845
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Lane Antics Die, HCD1-7199
Furry-Tailed Frolic Die, HCD1-7197
Furry-Tailed Frolic Cling Stamp Set, HCPC-3839
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Oakberry Lane Paper Collection, HCDP1-294
Sweet Peony Paper Collection, HCDP1-288
Fluttering Butterfly Cling Stamp Set, HCPC-3824
Blazing Poppy Petals Cling Stamp Set, HCPC-3674
Blazing Poppy Die, HCD1-764
Lush Lilac Die, HCD1-7170
Lush Lilac Cling Stamp Set, HCPC-3816
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Jet Black, RACP468
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Sweet Plum, TSMP506
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Delicate Border Basics Die, HCD1-7118
Classic Border Basics Die, HCD1-7119
Krystallos Shard Glass 1 oz., 901
Tombow Dual Brush Marker N00 Blender, 282873
Heat It Craft Tool, RAHT
Embossing Powder - White, RPEJ685
Vellum Paper - 10 Sheets, 3-GN2911-F
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Scor-Pal Measuring & Scoring Board, 173842
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Other Products: Brown Cardstock, Seam-binding, Scor-tape, Big-Shot, Silver Decoration, Glitter Beads, Small Buttons, Stapler, Thread, camera Stamp, Heat gun, Paper cutter, Ruler, Cutting knife, pencil
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Click here to more photos for this project. Take 1 piece of the Brown Cardstock and cut it at 6 x 6 inches, this is the bottom of your album, make 4 strips of Brown cardstock : 2 1/4 x 6", 2 1/2 x 6", 2 3/4 x 6", 3 x 6". Score them on both long sides 1/2 inch in, fold them and put tape on 1 side of both flaps, do this on all 4 pieces. Take 1 cardstock and score it in half, turn it and score it in half again, now you have for squares on your paper. Take your ruler and cutting knife and cut in one of the scor lines till the center, cut on both sides of the scor lines so the opening is around 1/8 of an inch, do this with all 4 of the papers. Place your 6 x 6" paper in front of you on the table and tape the 2 1/4 x 6" strip on the upper part, tape it on the back, then the next strip of 2 1/2 x 6" goes on the right side, the 2 3/4 x 6" goes on the bottom part and the last one 3 x 6" goes on the left. Take your big sheets with the slit in it and tape them down on the flaps you just placed, tape the squares on the left side of the cutting!!! (I will place a photo on my blog), do this with all of the sheets. Fold all the pages in half and then double, now you can fold them in your book, start with the top one, this has the smallest spine, then the right side one then the bottom and then at last the left side.Take a ribbon and tape it on the front and back of the album. Now you can cover all of the cardstock in your album with design papers, front and backs, also the front and back of the album.
So, with all the new labels, tags, arrows and corner dies of this special launch you can decorate your album, I also put some white cardstock in it for photos but you can place photos anywhere you want! Stamp also some quotes with the new stamp sets! The album has place for 33 photos. On the front you put a strip of the paper collection, off center, then on both sides of that strip glue 2 other strips from the paper, on the left strip you can glue a silver decoration strip, then cut out a label with a new die and the paper collection and glue this half on top of the strips, also 2 corners of that paper with the new corner die, and cut a new tag also from the paper, pull a ribbon through and bind it with a thread.
Stamp the Flowers and leaves from the Oakberry Lane Blossom stamp using the Sweet Plum on white cardstock and cut them out with the coordinating die, then color the centers of the flowers with Buttercup and the rest of the flower with LuLu lavender, then the edges with Majestic Violet. The leaves you color with a mix of the greens and a little bit of the Rich Cocoa. Then put 1 layer of flowers in the 3D mold and spray them with a mist of water then add another layer of flowers and leaves and do the same, you can put 3 layers in the mold, now run them through your machine, place the flowers on your mat and press in the center so the flowers will pop up. Make holes in the centers and pull some flower stamens through, now put some glue on the flower with a sponge or glue bottle this is easy because of the fine tip, then sprinkle some shard glass in it. Place the flowers on the front of your album in a nice arrangement.
Stamp the Squirrels you like with the Black Ink and color them with Rich Cocoa and Toffee Crunch, take your Blender marker and color the little flowers with Cactus Flower. Cut them out with the coordinating dies and place them in between your flowers on the cover of your book.
Hey, It's Your Birthday
Darice Adhesive Foam Strips, D120601
Designer Dries Clear Adhesive, 159723
Assorted Bead Stamens-Medium, HCS1-459-3
Groove Golf Tool Set, DMCT4185
Stack and Store Daubers-Pack of 30, HCDA2-450
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Intricate Swirl Frames Die, HCD2-7191
Frame a Card Leafy Borders Die, HCD2-7190
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Album Tags and Accents Die, HCD1-7202
Arrows and Banner Die, HCD1-7204
Other Products: White card stock, score board, die cutting machine, assorted ribbon, embossing folder.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Click here to view a Karger photo of this project. Make a card base from white card stock. Cut white card stock to size 10 inches by 7 inches. Score at 5 inch mark on the longer side and fold to make a 5 x 7 inch size card. Cut the biggest size tag from the tag die set. Cut the next smaller size tag from the same set and put in the embossing folder. Pass through the die cutting machine to emboss the tag.
Distress the edges and the tag front of the mat layer very lightly with the Majestic violet distress ink using a sponge dauber. Adhere the mat tag layer on the base of the main tag. Distress the edges of the main tag layer.
Adhere this tag on the card base. Stamp several images of the oakberry lane flower in majestic purple ink. Color the flowers with the same shade. Stamp the leaves in Fern Green and color with Leaf green. Cut the flowers with coordinating dies. Give shape to the flowers using the groove golf tools on an embossing pad. Layer two flowers together with glue and add light purple stamens.
Using the Arrows and banner die set, Cut one arrow in white card stock and the mat layer arrow in a purple color designer paper. Distress the edges of both with violet ink. Cut a small banner and distress the edges.
Cut the intricate label from the frame die set. Stamp a birthday sentiment from the Happy Birthday sentiment stamp set on the banner and the intricate label. Cut an intricate corner die cut and adhere to the tag corner on the left.
Adhere the arrow and banner with foam strips as shown. Arrange the flowers and leaves. Add ribbon on the tag to finish the tag card.
On Your Special Day
Lettuce Entertain You Prills, ANC814
I Cannot Tell A Lilac Prills, ANC822
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Frosting Powder, PGM15016
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
StazOn Ink Pad - Olive Green, TSSZ51
Ranger Archival Ink Pad - Majestic Violet, RACP494
Dove Blender Kit, 241159
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Butterfly Dreams Border Die, HCD1-7177
Butterfly Dreams Border Cling Stamp Set, HCPC-3823
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: White and Purple Cardstock, Dimensional Tape, Grape Jelly Memento Ink
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: My card size is 5 x 7". Make card base and cover with a piece of the paper collection. Using the largest Album Tag, cut out a piece of white cardstock. Now using the smaller die, cut a piece of purple and glue them together. Cut out the Ornamental Tags Die pieces to make the sign and then cut out the wording and glue it down. I cut the base using white then a piece of purple cardstock was used for the layering piece then the words were cut out of white. I used dimensional tape to adhere this to the Large Album Tag.
Next cut out a scallop lace piece using another of the dies from the Album Tags and Accents Die. I used white cardstock for this piece. Glue it to the bottom of the large Album Tag and then use dimensional tape to adhere the Large Album Tag to the card front.
Stamp the blossoms onto white cardstock using Majestic Violet ink and then color the centers with some of the Grape Jelly Memento Ink. Use Bamboo Leaves Memento Ink to color the leaves. Using the coordinating die cut out the blossoms and leaves. Lay the blossoms and leaves onto the 3D Mold and spritz with water and run through the Sizzix Vagabond 2. Lay out the pieces to dry. Once dry add glitter and Prills and leave to dry. Layer the blossoms and make the flowers. Decide where you want the flowers and leaves and glue them down.
Using Majestic Violet ink, stamp the butterfly onto white cardstock. Use Grape Jelly and Bamboo Leaves Memento Ink to color. Add glitter and Prills and allow to dry. Glue the butterfly down onto the card front.
Happy Birthday to You
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Lettuce Entertain You Prills, ANC814
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Fern Green, RACP962
Intricate Swirl Frames Die, HCD2-7191
Album Tags and Accents Die, HCD1-7202
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: Flower shaping cardstock
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Die cut two frames from the HCD2-7191 Intricate Swirls Frame die set in white cardstock. Score 1" from the top of the long side of one frame and add Dries Clear glue to the top 1" and adhere to the second frame to make a card base.
Die cut four small decorative corner dies out of white cardstock and adhere to each corner. Die cut the eyelet edge die from white cardstock and adhere to the centre of the card. Die cut the inner die from white cardstock and stamp the sentiment from the HCPC-3840 Oakberry Cottage & Sentiments set in Tuxedo Black ink and adhere to the base die. Die cut the outer frame from the HCD2-7191 Intricate Swirls Frame die set in white cardstock and adhere to the card with foam tape.
Stamp the leaves from the HCPC-3842 Oakberry Lane Blossoms stamp set in Library Green ink on flower shaping cardstock, colour in with Fern Green, Leaf Green inks and Majestic Violet inks before die cutting with the coordinating die. Shape using the coordinating mold and assemble when dry and add Crystal Clear glitter with Dries Clear glue. Adhere around the sentiment as shown.
Stamp the flowers from the HCPC-3842 Oakberry Lane Blossoms stamp set in Majestic Violet ink on white flower making cardstock and die cut with the coordinating dies. Sponge the outer edges with Majestic Violet ink and the middle of the flowers with Vivid Chartreuse ink and shape using the coordinating mold. Assemble when dry and add Crystal Clear glitter to the flowers and the Lettuce Entertain You Prills to the centres. Fold small petals to create buds and add under the leaves. Adhere around the leaves.
It Must Be Love
StazOn Ink Pad - Iris, TSSZ11
Lettuce Entertain You Prills, ANC814
Ranger Archival Ink Pad - Library Green, RACP475
Sweetheart Borders Die, HCD1-7161
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Paper Pack of 10 - White, HCPP1-438-2
Ranger Archival Ink Pad - Jet Black, RACP468
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Eyelet Hearts Die, HCD1-7162
Ornamental Tags Die, HCD1-7203
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: black cardstock
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Finished card measures 6.25 x 5.5", cut out in white cardstock. Cut out black mat, slightly smaller than card base, cut out purple paper from the Oakberry Lane Paper Collection, slightly smaller than black mat. Cut out the purple and pink panel from the paper collection, mat on black. Cut out 2 of the Sweetheart Borders in white cardstock and adhere under the pink and purple panel. Distress all panels and sponge edges with Iris. Adhere all to card base as shown. Cut out two hearts with the Eyelet Hearts Die, in purple pattern paper and the other in pink and purple floral from the paper collection, cut out two eyelet hearts adhere to front of card as shown.
Stamp the Oakberry Lane Blossoms in Iris, sponge centers with Bamboo Leaves, sponge the petals with Lulu Lavender, cut out with corresponding dies, sponge outsides of petals with Iris and sculpt with the 3D Blossoms Shaping Mold, add Lettuce Entertain You prills. See video here for tips on creating with the flower shaping mold. Sponge blossoms with adhesive and cover with Crystal Clear.
Stamp the leaves from the Oakberry Lane Blossoms in Bamboo Leaves, cut out with corresponding dies. Sponge the leaves with Bamboo Leaves, Lulu Lavender and sponge Library Green around the outside of the leaves. Sculpt with 3D Blossoms Shaping Mold.
Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set on white cardstock and cut out with the Ornamental Tags Die, cut out the outer frame for the sentiment in purple paper from the paper collection. Adhere near the bottom of the pink and purple panel.
Adhere the flowers across the hearts and add a couple to the sentiment, as shown.
For the inside of the card, cut out a paper panel from the paper collection. Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set on white cardstock and cut out with heart die from the Eyelet Hearts Die, cut out larger heart in purple paper from the paper collection and the eyelet die in white cardstock. Layer hearts as shown.
Happy Anniversary
Deluxe Flower Shaping Kit, HCST1-401
3D Floral Basics Shaping Mold, HCFB1-464
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Pink Peony, RACP649
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Leaf Green, RACP436
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Bright Pearl Stamens-Small, HCS1-458-1
Eyelet Hearts Die, HCD1-7162
Decorative Oval Die, HCD1-762
Eyelet Lace Frames Die, HCD2-7192
Flowering Dogwood & Doves Die, HCD1-7131
Flowering Dogwood & Doves Cling Stamp Set, HCPC-3775
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Album Tags and Accents Die, HCD1-7202
Other Products: Foam Sheets, pearls, Copic Markers: BV20, white card stock, London Gray Memento ink
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Card size: 5 x 7". Cut a light pink piece of decorative paper 4 7/8 x 6 7/8" and glue to the white card base. Cut the Eyelet Lace Frame Die from white and glue it to the light pink paper. Cut 2 eyelet hearts from white. Cut 2 Eyelet ovals from white and glue to light pink paper then cut with the heart die to fit inside of eyelet heart die cuts. Stamp sentiment using Majestic Violet ink on one of the tags in the decorative paper from the Oakberry Lane Collection. Use the new Album Tags and Accents Die to cut out the tag with sentiment. Cut matching eyelet tag from white and glue the sentiment tag onto it.
Stamp doves using London Gray Memento and coloring with BV20, die cut. Stamp flower blossoms with Majestic Violet and Rose Madder, leaves with Fern Green. Form flowers using the 3D Mold (see Emma Lou's video here). Use the Leaves 3D mold as well. Insert stamen add glitter and let dry.
Pop up sentiment tag with a layer of Foam Sheet, pop up right heart with 1 layer of foam sheet and the left heart with 2 layers of foam sheet. Glue the tag centered toward the bottom and the hearts above centered. Glue doves onto hearts. Tuck leaves under hearts and under the tag sentiment. Add flowers on top of leaves and then add pearls to card.
A Gift for You
Nuvo Crystal Drops - Gloss White, NU651
Ranger Archival Ink Pad - Manganese Blue, RACP454
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Emerald Green, RACP447
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Rajni Chawla's Crystal Clear, PGM15015
Pins Kit, PIN6
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Rock Candy Stamens-Small, HCS1-459-4
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Leafy Accents Cling Stamp Set, HCPC-3835
Leafy Accents Die, HCD1-7193
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Other Products: White cardstock, foam dots, corner rounder
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Prepare a 5 x 7" white card base. Layer with a piece of the Oak berry Lane paper on top 1/4" smaller and round the 4 corners.
Cut the large tag out of white, add foam dots to the back and adhere to the center of the card. Layer a piece of the Oakberry paper on top using the next size of the tag die. Using the Ornament tag die cut the back ground out of white, top with the next size in the blue Oakberry paper, then add the words in white as shown. In the lower right corner, add the corner die.
Stamp the flowers on white with the Manganese Blue, color in with the Forget me not, cut out with the matching die, high light the edges with more of the Manganese Blue. Shape using the Blossom Shaping Mold. Add stamens in the center.
Stamp the leaves on white with the Library Green, color in with the Leaf Green, cut out using the matching die, shape using the leaf mold, high light the edges with the Emerald Green. Adhere to card.
To finish, add glitter to the flowers and leaves.
Birthday Love
Dove Blender Kit, 241159
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Stack and Store Daubers-Pack of 30, HCDA2-450
I Cannot Tell A Lilac Prills, ANC822
Hot Mama Prills, ANC821
StazOn Ink Pad - Olive Green, TSSZ51
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Rhubarb Stalk, TSMP301
Memento Dye Ink Pad - Danube Blue, TSMP600
Memento Dye Ink Pad - Teal Zeal, TSMP602
ColorBox Fluid Chalk Ink Pad - Rouge, 71015
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Ticket and Tags Die, HCD1-7201
Album Tags and Accents Die, HCD1-7202
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Cottage Die, HCD1-7198
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: White Cardstock, White Ribbon, Scor-Tape, Magnets, Dimensional Tape, Grape Jelly Memento Ink, Pumice Stone, Tea Dye and Vintage Photo Distress Ink,
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY
Instructions: My Album is 5 x 7. I was totally inspired by Kathy Clement's video for her Heartfelt Creations Butterfly Medley Tri-Fold Folio and followed along to make the album. See the video here. Once I had the basic album made out of white cardstock I used Scor-Tape to adhere white ribbon on the front and back page of the album to make a closure. I covered the pages with pieces of the paper collection. I also covered the 1/2" space between the pages with the paper collection.
Stamp the flowers with Rouge and Majestic Violet ink onto white cardstock and color the centers with Rose Bud for the pink and Grape Jelly ink for the purple flowers. Stamp the leaves with StazOn Olive Green ink and color with the Bamboo Leaves Memento ink. Use coordinating dies to cut out the flowers and leaves and place them into the mold and run through the Vagabond. Lay them out to dry. Once dry add prills to the centers of the flowers and allow to dry. Add glitter to the flower petals and allow to dry.
Stamp the cottage with Rich Cocoa Memento Ink onto white cardstock. Cut out using the coordinating die and color with Memento Inks, the daubers and the Dove Blender Pen. Add glitter to the piece and set aside to dry. I cut out extra sets, so I could use dimensional tape to adhere to the cottage to give it more dimension. Adhere this piece to the album front and add flowers and leaves and glue down.
The first page on the inside of the album is a waterfall for adding photos and I used pieces from the Flip Fold Inserts packet. I used Scor-Tape to glue the flaps down then cut out card fronts from the paper collection to fit on these flaps. Next, I cut out two pieces of the long die out of the Ticket and Tags Die and covered them with pieces of the paper collection. This was the time when I glued down the magnets to make a closure for the waterfall. I glued a flower to the top flap just to give a bit of decoration to this piece.
The center piece of the inside of the album has a pocket on it. I just used Scor-Tape to glue 3 sides of a piece of white cardstock to the bottom of the page. Next cut out a piece of coordinating paper and adhere to the white cardstock pocket. Cut out 4 of the corner pieces from the Album Tags and Accents Die using white cardstock. Glue these pieces to the corners of the pocket. Add a flower and leaves to the pocket as well. Next using the tags die, I made tags to fit in the pocket. I used white ribbon to tie in the hole of the tags for interest.
For the back page of the album I just wanted a medallion saying Happy Birthday. Out of white cardstock I cut out one of the Accent pieces and then I cut another out of the paper collection. Using Grape Jelly Memento Ink, I stamped the sentiment from the Special Birthday Sentiments Cling Stamps. Glue the two pieces together to make a medallion and use dimensional tape to adhere to the back page.
Happy Mother's Day
Ranger Archival Ink Pad - Magenta Hue, RACP614
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Bridal Bouquet Stamens-Small, HCS1-460
Assorted Bead Stamens-Medium, HCS1-459-3
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Thank You Sentiments Cling Stamp Set, HCPC-3846
Just For You Sentiments Cling Stamp Set, HCPC-3845
For My Friend Sentiments Cling Stamp Set, HCPC-3844
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Arrows and Banner Die, HCD1-7204
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Paper Collection, HCDP1-294
Other Products: Memento Grape Jelly, Brilliance Pearlescent Lavender, Distress Spiced Marmalade, ColorBox Orange, Distress Peeled Paint, Distress Aged Mahogany, Versafine Smoky Gray, Silver Edged Sheer Ribbon, Crop-a-dile, Eyelets - Pink, purple and orange, Cardstock - Pink, purple and orange
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Click here to see more photos of this project. Using your Oakberry Lane Paper collection, select the sheet that fits your Album and Accents tag, you will use 2 sheets, cut two purple, 2 orange and 2 pink, but I have used the outer tag and inner tag, once each for each so that I end up with 2 different sizes for each color. You will be using the mats one up and one down. With the smaller one I have cut a matching larger tag to mount it on, so using your large tag cut 1 purple, 1 pink and 1 orange tag using bazzill. Mount these using 3d dots. Using the smaller tag die cut 1 purple, 1 pink and 1 orange tag using Bazzill, adhere these to the remaining mats, these will be the same size and adhere flat using you designer dries clear adhesive.Apply a coordinating eyelet to the top of each tag.
Purple - using you Oakberry Lanes Blossoms stamp, stamp large and small flowers using Memento Grape Jelly and color with Brilliance Pearlescent Lavender. Cut with coordinating dies. Highlight the edges using the Grape Jelly ink.
Pink - using you Oakberry Lanes Blossoms stamp, stamp large flowers using Archival Magenta Hue ink and color with the same ink. Cut with coordinating dies. Highlight the edges using the same ink.
Orange - using you Oakberry Lanes Blossoms stamp, stamp medium and small flowers using Distress Dried Marigold and color with Distress Spiced Marmalade. Cut with coordinating dies. Highlight the edges using the Colorbox Orange ink.
Leaves - using your Oakberry Lane Blossoms stamp, stamp your leaves 20 times using Versafine Smoky Gray ink, color with Distress Peeled Paint ink and die cut with coordinating die. Highlight edges with Distress Aged Mahogany.
Using your ornamental tags die, cut 1 purple mat. Using your ornamental tags die, cut 1 orange tag. Using your arrows and banner die, cut 1 pink mat, I have placed a bone fold mark in 1cm from each end then I have placed a second approx. 1cm in this will allow you to fold the tails in at the end, put a 3D dot under each section.
Spray your flowers with a mini mister and shape all the flowers and leaves using the 3D Blossoms Shaping Mold. Click here to see how to use the flower shaping molds. When shaped adhere 2 of each flower together using designer dries clear adhesive. Set aside to dry before adding stamens. You may need to re highlight edges. Using your deluxe shaping kit, using the piercing tool and mat, pierce a hole in the flower centers and adhere white wired stamens to the purple flowers, the wire can be trimmed off, but leave one on the smaller flower and curl your wire, wrap it around a skewer or object of similar size and when you remove it you will be left with a spiralled wire. Adhere white stamens to the orange and pink flowers.
Assemble your tags - Purple tag 1 - Stamp your mat with "Happy Anniversary" sentiment from the Celebrate Love Sentiments cling stamp set using Versafine Smoky Gray ink. Using 3d adhesive adhere your sentiment mat. Adhere 2 leaves and one large flower to the top left of the tag. Thread through your ribbon.
Purple tag 2 - Stamp your tag with "Happy Mother's Day" sentiment from the Thank You Sentiments Cling stamp set. Adhere 3 leaves and one large and 1 small flower to the bottom right of the tag. Thread through your ribbon.
Pink tag 1 - Stamp your tag with "thinking of you" sentiment from the Cheerful You Sentiments Cling stamp set. Adhere 3 leaves and two large and 1 small flower to the bottom left of the tag. Thread through your ribbon.
Pink tag 2- Stamp your mat with "Just wanted you to know" sentiment from the For my Friend Sentiments cling stamp set using Versafine Smoky Gray ink. Using glue on the left adhere your sentiment mat in place and then using glue on the right hold in place to create an arched mat. Adhere 3 leaves and 2 large flowers to the top of the banner and 1 leaf and 1 medium flower below the banner. Thread through your ribbon.
Orange tag 1 - Stamp your orange tag with "Happy Birthday" sentiment from the Special Birthday Sentiments Cling stamp set. Adhere 4 leaves and 3 medium flowers to the top of the tag. Using 3d dots adhere your sentiment tag. Thread through your ribbon.
Orange tag 2- Stamp your tag with "you are so thoughtful" sentiment from the Just for you Sentiments cling stamp set using Versafine Smoky Gray ink. Adhere 3 leaves and 3 medium flowers to the bottom of the tag and 1 leaf and 1 small flower to the top of the tag. Thread through your ribbon.
TIP: cut a large amount of tags from your leftover paper stacks, decorate with coordinating color flowers and have your sentiments cling sets on standby, there is a stamp for all occasion in these sets. With the ready-made tag all you need to do is stamp it with the appropriate sentiment and you will always have something ready in a hurry.
Just a Note to Cheer You
Designer Dries Clear Adhesive, 159723
Bright Pearl Stamens-Small, HCS1-458-1
Ranger Archival Ink Pad - Jet Black, RACP468
3D Blossoms Shaping Mold, HCFB1-469
Arrows and Banner Die, HCD1-7204
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
For My Friend Sentiments Cling Stamp Set, HCPC-3844
Just For You Sentiments Cling Stamp Set, HCPC-3845
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Oakberry Cottage Die, HCD1-7198
Oakberry Lane Antics Die, HCD1-7199
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: Card stock: white, blue and gold metallic; Ranger Distress Ink, Broken China, Wild Honey; Ranger Distress Oxide, Abandoned Coral; StazOn, Saddle Brown; Prismacolor Pencils; 5" x 8" note pad; seam binding; hot glue; craft foam; blue brads; Stickles, gold; blue glitter gel pen
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: To create folio, use a piece of white card stock 8 1/2" x 11". Score at 5 1/4" and 5 3/4", fold on score lines. Cut 4 pieces of white card stock 5" x 8 3/8" for both outside and inside. Ink the edges with Abandoned Coral and adhere to front and back and inside of folio. Cut 3 pieces of design paper 4 7/8" x 8 1/4", adhere to front and back and inside left. For spine, cut a 2 pieces of white card stock 3/8" x 8 3/8", ink edges with Abandoned Coral, add to outside and inside spine. Cut a 2 pieces of design paper 1/4" x 8 3/8", add to spine, outside and inside. From white card stock, die cut 2 corner pieces, 1 label, 1 tag, and squirrels. Cut with coordinating dies. Also cut squirrels from craft foam.
Color squirrels with Prismacolor pencils. Add the craft foam to the back of the squirrels and then add to the folio. Stamp flowers on white card stock with Wild Honey, die cut and shape with 3D Shaping Mold. Click here to see how to use the flower shaping molds. Add Bright Pearl-Small Flower Stamens and gold Stickles.
Stamp sentiment from the Cheerful Notes Sentiment stamp on white card stock with Jet Black, cut with the Ornamental Tags Die. Also cut the circle from blue design paper with the same die set. Trace inside the label die with a blue glitter gel pen and ink the edges with Abandoned Coral. Cut hole reinforcers from gold metallic paper. Add 1 to the tag and 1 to the label. Add blue brads. Layer the tag and circle to the label with foam tape. Adhere to the folio and add the bow. Add the flowers with hot glue.
Inside: Using the largest tag die from the Album Tags and Accents Die, cut from white card stock. Cut the inside piece from blue design paper and adhere to white piece. Die cut the banner from white card stock. Score at 3/4" and 1" from both ends. Fold in a banner shape. Center the sentiment from Cheerful Note Sentiments stamp set and stamp with Jet Black. Add foam tape to center of banner and add to tag. On white card stock, stamp the cottage 3 times. Also cut 1 from craft foam. Shade the windows on the first layer with blue Prismacolor pencil. Add the craft foam to this layer. On 2nd layer, color the entire image. Die cut the window from this image with the coordinating die. Add the colored image to the white layer. Also cut the window frame from craft foam and add to window frame. On 3rd layer, color squirrel and die cut with coordinating die. Also cut from craft foam and adhere to squirrel. Add these layers to the cottage. Die cut the background from coral design paper and adhere the cottage. For pocket, cut a piece of design paper 2 1/2" x 5 7/8", score at 1/2" and 5 3/8", fold tabs back and adhere to bottom of left side. Adhere cottage to pocket.
Right side: To create sleeve for note pad, cut a piece of blue card stock 4 3/4" x 6". Score 6" side at 1/2" and 5 1/2", fold back and adhere sleeve to folio, 1 1/8" down from the top. Cut a piece of design paper 1" x 5", add to top of note pad. Stamp 'Hey Friend' on white card stock with Broken China. Cut with oval tag die, add gold hole reinforce and blue brad. Add to note pad with foam tape. Stamp 'With All My Love' on white card stock with Jet Black and die cut with 3 1/2" arrow die. Stamp the rest of the sentiments on the note pad with Jet Black, Broken China, and Abandoned Coral. The sentiments are from the Cheerful Note Sentiments and For My Friend Sentiments stamp sets. Slip the note pad in the sleeve. If the note pad is too tight, trim off 1/16" from each side of the chipboard back.
Just for You
Lettuce Entertain You Prills, ANC814
Ornamental Tags Die, HCD1-7203
Just For You Sentiments Cling Stamp Set, HCPC-3845
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Antics Die, HCD1-7199
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: White card, white stamping card, black card, tonic clear cystal nuvo drops, cosmic shimmer pewter pixie powder, black brusho, Balmy blue, melon mambo and Blueberry bushel stampin up inks, black StazOn ink, clear embossing powder, white bakers twine or thin yarn, water pen or brush, foam pads, silicone glue, hot glue, Kuretake zig clean colours:- green, light green, black, light pink, pink, dark pink
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Score a 15" x 5.5" piece of white card at 7.5" to create your 7.5 x 5.5" card base.
Cut a 7.25" x 5.25" piece of black card and a slightly smaller blue paper from the paper collection and layer onto the card base.
Cut a 6" x 4" piece of white stamping card and spritz with water. Sprinkle with pixie powder and brusho, add more water to disperse the powders further and allow to dry. Sponge around the edges with balmy blue ink to remove any white areas and then with blueberry bushel to give a darker edge. Mount onto a slightly larger piece of black card and adhere to the card base using foam pads.
Make the smaller flowers: stamp the flowers onto white stamping card using black StazOn ink, colour using the Kuretake pens and die cut. Spritz the mold with water and place the flowers face up onto the mold, place the top of the mold into position and run through the die cutting machine. Remove from the mold and allow to dry. Add colour to the reverse of the flower. Layer the flowers together using 2 larger petals and one smaller petal. Add nuvo drops to the centre of the flowers and sprinkle with prills, remove excess and allow to dry.
Make the central flower: Stamp the flower from the Oakberry Lane Antics stamp set 3 or 4 times using black StazOn ink. Colour using the kuretake water colour pens. Die cut and lightly shape the leaves to one image and add centrally to the base card. Cut a set of 3 petals, a set of 2 petals, a centre with one petal attached and a centre only from the other coloured images and build up/decoupage them using silicone glue. Use a drop of nuvo drops and prills as with the smaller flowers.
Shape and diecut some more coloured leaves and position these amongst the smaller flowers onto the card.
Using the Kuretake pinks colour a piece of white card, allow it to dry and stamp the sentiment in black ink and add clear embossing powder, remove the excess and heat to set. Die cut the tag. Tie a bow with the yarn and tuck the tag under the leaves at the front and secure in place using foam pads.
Life is Better With You in It
Double Dots 100pc. -3D Foam Circles, DDOTS
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Embossing Powder - White, RPEJ685
ColorBox Pigment Ink Pad - Frost White, CB80
Stack and Store Daubers-Pack of 30, HCDA2-450
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Red Geranium, RACP993
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Lush Lilac Die, HCD1-7170
Lush Lilac Cling Stamp Set, HCPC-3816
Eyelet Lace Frames Die, HCD2-7192
Arrows and Banner Die, HCD1-7204
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Antics Die, HCD1-7199
Oakberry Cottage Die, HCD1-7198
Other Products: Smooth white cardstock, Scoreboard, Die Cutting Machine, Glitter balls, a piece of metallic card stock, Mixed Sequins, and Zig Clean Clear Brush Markers.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: The ready top-fold card from white cardstock measures 8" by 5 1/2" and the first matted layer on the card is from the designer paper collection which measures, 5" by 7 1/2". Cut a strip, measuring 1 1/2" by 5" of a purple paper from the paper collection and mat it on the right side of the card panel as shown.
For the next layer, choose a paper from the paper collection and cut it measuring 5 3/4" by 4" and layer it on a white cardstock, making 1/8" border on all the four sides. Use a double-sided tape and layer it on Eyelet Lace Frames die cut which is cut from a golden metallic paper.
For Shaker, cut 6-7 pieces of frames from white cardstock and one frame from peach color pattern paper by stacking larger 2 banner dies from Arrows and Banner Die Set. Glue and stack all the white die cut frames together and colored frame with acetate sheet and keep them aside. Also cut a piece of patterned paper with flower and one piece of acetate to create window front, using outer banner die. On the base of the shaker, stamp a sentiment from Oakberry Cottage & Sentiments Cling Stamp Set using Red Geranium Archival ink. Stamp and cut leaves from Woodsy Landscape stamp and die set and color them using Zig Markers. Attach the stacked frame to the base as shown, glue the painted leaves and fill the window with sequins and close the shaker using acetate top.
For embellishing the card, stamp the images from Oakberry Cottage & Sentiments Cling Stamp Set and Oakberry Lane Antics Cling Stamp Set with black and cut them using their coordinating dies. Color all the images with Zig Clean Clear Markers. All the acorns are layered and shaped by adding an extra layer and shaped using Deluxe Flower Shaping Kit. Extra die cut layers are added to the squirrels for extra support.
For filler flowers, white heat emboss few Lilacs from Lush Lilac Collection, color them using distress oxide ink, shape them a little with hands and add glitter balls to the center.
Cut a printed flower cluster from the same paper collection and add it as an extra accent between the card layers, Once all the elements are ready, assemble the card as shown.
As Special as You Are
Darice Adhesive Foam Strips, D120601
5pc. Acrylic Block Set, SUAH05
Spellbinders Tool N' One, 359848
Scor-Pal Measuring & Scoring Board, 173842
Nuvo Crystal Drops - Red Berry, NU667
Nuvo Crystal Drops - Ebony Black, NU650
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Sunflower, RACP005
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Bright Pearl Stamens-Medium, HCS1-458-2
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Album Tags and Accents Die, HCD1-7202
Ticket and Tags Die, HCD1-7201
Eyelet Rectangle & Basics Die, HCD2-7189
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Other Products: Cuttlebug Anna Griffin Embossing Folder Poppy, Morning Dew Nuvo Crystal Drops
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Die cut a piece of white cardstock using the 2nd largest die from Eyelet Rectangle & Basics Die. Ink one side of the Poppy Embossing Folder with Sunflower Archival Ink, put the die cut cardstock inside and carefully close the embossing folder without moving the cardstock and emboss it. Adhere this to a 5" x 7" white card base.
Die cut a piece of white cardstock using the long eyelet die from Ticket and Tags Die. Cut it in the middle and adhere it to the card base aligning both the ends to the top and bottom using Darice Adhesive Foam Strips as shown.
Stamp the sentiment from Special Birthday Sentiments Cling Stamp Set on a piece of white cardstock using Black Archival Ink. Die cut this piece using the die from Album Tags and Accents Die. Ink the edges with Sunflower Archival Ink using Stack and Store Daubers. Die cut another piece of white cardstock using the eyelet die from the same set. Adhere the stamped die cut on the eyelet die cut and adhere it to the card front as shown using Darice Adhesive Foam Strips.
Stamp the leaves from Leafy Accents Cling Stamp Set using Olive Archival Ink on a piece of white cardstock and ink it with Leaf Green Archival Ink using Stack and Store Daubers. Die cut the leaves using the matching dies from Leafy Accents Die and shape them using 3D Leafy Accents Shaping Mold.
Stamp the flowers from Oakberry Lane Blossoms Cling Stamp Set using Forget-Me-Not on a piece of white cardstock and ink it with the same ink using Stack and Store Daubers. Die cut the flowers using matching dies from Oakberry Lane Blossoms Die and shape them using 3D Blossoms Shaping Mold and Deluxe Flower Shaping Kit. Add peach pollens from Bright Pearl Stamens to the flower centers. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Arrange and adhere all the flowers and leaves as shown. Add a few tiny ladybugs made with Ebony Black and Red Berry Nuvo Crystal Drops to the flower arrangement. Add some Morning Dew Nuvo Crystal Drops to the flowers and leaves to make dew drops.
So Grateful for You
3D Blossoms Shaping Mold, HCFB1-469
Rock Candy Stamens-Small, HCS1-459-4
Eyelet Rectangle & Basics Die, HCD2-7189
Eyelet Lace Frames Die, HCD2-7192
Ornamental Tags Die, HCD1-7203
Album Tags and Accents Die, HCD1-7202
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Fern Green, RACP962
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Leaf Green, RACP436
Funnel Tray, 359503
Deluxe Flower Shaping Kit, HCST1-401
Double Dots 100pc. -3D Foam Circles, DDOTS
Stack and Store Daubers-Pack of 30, HCDA2-450
Rajni Chawla's Crystal Clear, PGM15015
Other Products: White cardstock.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Cut one 5" x 7" cardstock to create a base for album. Now cut one pattern paper and tear the edges. Before pasting pattern paper, adhere some dry grass and then paste pattern paper taken from the Oakberry Lane collection.
Cut one Eyelet Lace Frames Die and adhere it with Designer Dries Clear Adhesive.
Cut one large tag die from the Album Tags and Accents Die and cut one smaller tag die on pattern paper and distress the edges and paste it. Now cut two eyelet rectangle diecuts from white cardstock and create shaker embellishment.
Stamp some blossoms and leaves from Oakberry Lane Blossoms Cling Stamp Set with archival ink-red carnation, fern green for leaves and cut them matching die and color them with archival ink rose madder, sunflower, cactus flower and leaf green and shape them with 3D Blossoms Shaping Mold, add stamens at the centre of the flower, and then add some crystal clear glitter. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE. Now arrange these leaves and flower as seen on the picture.
Now cut one eyelet tag die from Album Tags and Accents Die and one smaller die from Album Tags and Accents Die and distress the edges as shown. Cut one Ornamental Tags Die with sentiment A Gift for you.
Cut seven to eight pieces of border die from Album Tags and Accents Die and paste at the edges of the album base as shown.
Have a Wonderful Birthday
Album Tags and Accents Die, HCD1-7202
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Cactus Flower, RACP985
Butterfly Medley Cling Stamp Set, HCPC-3650
Butterfly Medley Die, HCD1-759
Eyelet Lace Frames Die, HCD2-7192
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Blossoms Cling Stamp Set, HCPC-3842
Other Products: The Secret Garden flower making paper Vellum paper, Sparkling dust, white embossing powder, VersaMark, spiced marmalade distress oxide, thistle archival
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Ready top-fold card measures 7.5" x 5.5". Take a smooth white cardstock measuring 11"x 7.5". Score on 5.5" and create a top fold card base. Choose a pattern paper from the designer paper collection and cut a piece measuring 7.25" and 5.25"and layer it on the ready card base. Cut white cardstock using eyelet lace frame die and color it using Spiced Marmalade Distress Oxide. Apply clear glue on the frame die cut and add glitter on it. Glue the frame on the card base as shown in the picture. Cut white cardstock using album tags and accents die. Distress the edge of the tag using Spiced Marmalade Distress Oxide. Stamp a sentiment on the tag from Special Birthday Sentiments Stamp using Cactus Flower ink. Glue the tag using foam tape to add dimension.
Stamp Oakberry Lane Blossom on the flower making paper using cactus flower ink. Also stamp leaves using Olive Green ink. Cut the flowers and leaves with coordinating die. Color the flowers with Spiced Marmalade Distress Oxide and Cactus Flower ink also color the leaves using Leaf Green Archival ink. Shape the flowers and leaves using mold. Arrange the flowers and leaves on the card using hot melted glue.
Stamp the butterfly on the vellum paper using Versamark and heat emboss it with white embossing powder. Cut with coordinating die. Glue two butterflies on the card. For the finished look apply sparkling dust on the flowers using adhesive that dries clear.
So Much More than a Friend
Rock Candy Stamens-Small, HCS1-459-4
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Tiger Lily, RACP670
Ranger Archival Ink Pad - Plum, RACP499
Ranger Archival Ink Pad - Cactus Flower, RACP985
Ranger Archival Ink Pad - Jet Black, RACP468
Rajni Chawla's Crystal Clear, PGM15015
Ornamental Tags Die, HCD1-7203
Intricate Swirl Frames Die, HCD2-7191
3D Blossoms Shaping Mold, HCFB1-469
Oakberry Cottage Die, HCD1-7198
Oakberry Lane Antics Die, HCD1-7199
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Cottage & Sentiments Cling Stamp Set, HCPC-3840
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Other Products: White Cardstock, Pencil Colors, 3D foam Tape, Clear Drying Glue, Gold Mirror Cardstock For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: The finished card measures 6 1/2 x 7 1/2". For the base of the card cut white cardstock 13 x 7 1/2", score at 6 1/2" from the longest side and fold.
The card consists of three layers of pattern paper. For the first layer choose pattern paper from the collection, cut to the size 6 1/4 x 7 1/4" and adhere on the card base.
For the second layer cut pattern paper from the collection 5 3/4 x 6 3/4" and adhere it on the first layer of pattern paper with clear drying glue.
Die cut white cardstock using Intricate Swirl Frames die and arrange it diagonally in the center of the card with 3D foam tape. Adhere third layer of pattern paper in the center square of Intricate Swirl Frame die cut out leaving the border.
Die cut out pattern paper using Ornamental Tags Die and mat with Gold Mirror cardstock. Stamp white cardstock with the images using Oakberry Lane Antics Cling Stamp Set and Oakberry Cottage & Sentiments Cling Stamp Set. Die cut using coordinating die and color the images with pencil colors.
For the flowers stamp white cardstock with Oakberry Lane Blossoms Cling Stamp Set using Archival Ink -Plum. Die cut using the coordinating die and color the petals with Archival ink Cactus Flower and Lily. Make sure to color both the sides of the petals. Shape the flowers using 3D Blossoms Shaping Mold. For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
For leaves stamp white cardstock with Oakberry Lane Blossoms Cling Stamp Set using Archival Ink Library Green. Die cut using the coordinating die. Color the petals using Archival Ink Pad Olive and ColorBox Fluid Ink Pad Olive Pastel.
Once all the elements are ready arrange them as shown. Apply Clear glitter on flowers with clear drying glue.
You Are So Thoughtful
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Tiger Lily, RACP670
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Olive, RACP482
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Heat It Craft Tool, RAHT
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Scor-Pal Measuring & Scoring Board, 173842
Spellbinders Tool N' One, 359848
Funnel Tray, 359503
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Garden's Edge Coneflower Die, HCD1-7182
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Just For You Sentiments Cling Stamp Set, HCPC-3845
Thank You Sentiments Cling Stamp Set, HCPC-3846
Other Products: Cream Pearlized Cardstock, Gold Mirror Cardstock, WOW Metallic Gold Sparkle Embossing Glitter, VersaMark, Encore Metallic Gold ink, Foam tape, Dimensional dots, Corner Punch
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
Instructions: Card size is 6 x 4 3/4". Cut two pieces of pearlized cream cardstock 6 x 4 3/4" and 6 1/2 x 4 3/4". Score the larger piece at 6", fold tab and adhere to the 6" piece to create a hinged tent fold card base. Cut a mat layer from gold mirror cardstock 5 3/4 x 4 1/2" and a top layer from cream pearlized cardstock 5 1/2 x 4 1/4". Adhere the top two layers together with dries clear adhesive and then adhere to the card base with foam tape.
Diecut the decorative label from the Ornamental Tags Die two times from Cream pearlized cardstock and two times from Gold Mirror Cardstock. Adhere the cream to the gold, offset just slightly. Adhere the decorative labels to piece of cardstock 1 1/4 x 3", one right side up and one upside down as shown and adhere to the card base as shown. Cut a piece of gold mirror cardstock 1 1/2 x 3 1/4". Stamp the sentiment on a piece of cream cardstock 1 3/8 x 3 1/8" with VersaMark, sprinkle with WOW Metallic Gold Sparkle Embossing Glitter, heat set with heat It tool and ink the edges with Metallic Gold Ink. Adhere to gold mirror cardstock with dries clear adhesive and adhere to the decorative labels with foam tape.
Stamp the Coneflowers on Rajni Chawla's Flowerite Vellum with Versamark, sprinkle with WOW Metallic Gold Sparkle Embossing Glitter, Heat set and diecut with coordinating die. Color the coneflowers with Archival inks; Olive, Sunflower, Tiger Lily and Coffee using Stack and Store Daubers. Shape lightly using the Deluxe Flower Shaping Kit and adhere to the card base as shown using dimensional dots and dries clear adhesive.
Inside: Cut a mat layer from gold mirror cardstock 5 3/4 x 4 1/2" and a top layer from cream pearlised cardstock 5 1/2 x 4 1/4". Use a corner punch on the cream layer, adhere the layers together and adhere to base using dries clear adhesive. Stamp the sentiment using VersaMark, sprinkle with WOW Metallic Gold Sparkle Embossing Glitter and heat set.
Hope Your Day is Special
Oakberry Lane Blossoms Die, HCD1-7200
Oakberry Lane Antics Die, HCD1-7199
Oakberry Lane Paper Collection, HCDP1-294
Oakberry Lane Antics Cling Stamp Set, HCPC-3841
Heat It Craft Tool, RAHT
Art Foam Paper-10 Pack, HCFS1-465
Album Tags and Accents Die, HCD1-7202
Special Birthday Sentiments Cling Stamp Set, HCPC-3843
Pastel Pearl Stamens-Small, HCS1-457-1
Delightful Daisy Die, HCD1-760
Delightful Daisies Cling Stamp Set, HCPC-3656
Ranger Archival Ink Pad - Cactus Flower, RACP985
Pins Kit, PIN6
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
5pc. Acrylic Block Set, SUAH05
Stamp Mat Pad, D110305
Other Products: Gold Foil, Chipboard, Glue Gun, Watercolor paper, Hybrid ink, Zig Clean Color Real Brush Markers
For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.
For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.
Instructions: Click here to view a larger photo of this project. Take your tag diecut (large outline) and cut the base out of chipboard. Now cover the back piece using the gold foil paper. You will now diecut the top layer of the tag using paper from the Oakberry paper collection.
Take the decorative piece from the tag set and diecut the mat in gold and the overlay with white cardstock. Take and stamp the sentiment using memento ink in black. Be sure to stamp along the top edge of the diecut.
To create the flowers, diecut a total of 4 small daisies from Art Foam. Shape using a heat gun. Each flower will have only 2 layers. Using your dauber add some cactus flower ink to the flower centers. Glue each layer together and add some stamens by piercing the centers. Add the greenery by die cutting the leaves from the paper itself using the coordinating die.
Stamp/diecut your squirrels using the hybrid ink on watercolor paper. Once done color using your zig clean color pens and adhere to the bottom of your diecut tag piece.