Designer Dries Clear Adhesive
Metal Tip for Adhesive Bottles
3-D Crystal Lacquer
Memento Dye Ink Pad - Bamboo Leaves
Brilliance Ink - Pearlescent Coral
Stack and Store Daubers-Pack of 6
Tropical Paradise Cling Stamp Set
Tropical Paradise Die
Classic Wedding Paper Collection
Window Box Fillers Die
Window Box Fillers Cling Stamp Set
Simply Classic Die
Simply Classic Cling Stamp Set
Young at Heart Paper Collection
Other Products: Wooden sticks, Pearl
pen, Chain, Piece of plastic wire, silver sticky Duct tape, Silver marker,
Gears silhouette store, tire, wooden dowel. Greenery, acetate, gold sticker,
rust paint Viva Décor, black marker, plaster rock, tape, hot glue, red, white
and yellow cardstock, wooden blocks, Distress Ink Vintage Photo, scor-board,
Twin markers CG8 – 5 – 11, acetate, black round bead.
For more tips on creating with this
collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.
Instructions: For a larger view of this project see here. Cut some gray board
in the following sizes: Bottom 10" x 6", two times. Sides 2 ¾" x
6", Front 7"x 6", Back 7" x 6", Roof 5" x
Mark the windows on the front from
1 inch on the bottom and ½ inch on the other 3 sides, in the middle window
there is an extra window on a height of
3 inch with a piece of ½ inch on top of that for the sides you do the
same 1 inch on the bottom and ½ inch on the other 2 sides.
First make some hinges you do that
to cut a piece of Cardstock at 1" x 12" then fold it in half on your
score board then on the back of the paper on both sides of the score lines you
put tape, then fold them.
Now get your pieces and lay them
flat on the table and lay them like this: Back – hinge – Side – Hinge – Front –
Hinge – Side – Hinge, now tape the hinges on the sides of the panels in the
order how they lay in front of you, don’t tape the last one down yet because it
will be easier to decorate! I will put a photo on my blog! On the inside of the
windows you can adhere acetate behind the windows, you can also glue a back
wall piece on the back and put some white cardstock on the inside panels, then
you can close the garage! Now put on all the bottom and roof sides paper hinges
on the inside!!!
Put designer paper on the outside
of the garage at your own taste and ink the edges!
Get your bottom part and put
designer paper on it. Put your garage on it and tape it down with the hinges,
put a decorative paper on the floor and cut a scooter out and make a sign for
in the garage I put a strip of acetate on the back and glued it down. I also made
a closed sign and glued it on the door. For the hangers I used a sticker and
cut it in length. Now you can attach the roof also on the hinges!
Get your wooden popsicle sticks and
glue them on the roof, ink them using Vintage Photo ink. Cut out a border from
the designer paper and glue little pennant banners behind it (I cut these out
by hand form red cardstock). I also made a sign of 2 leftover pieces of the
sticks and I glued 2 little chain pieces on the back and then I glued it under
the roof. I fussy cut a ticket image of the paper and I put Crystal Lacquer on
top let it dry. Then glue it on the sign!
I cut the dowel in the good size
and put Vintage Photo Distress ink on it and glued it in between the bottom and
the roof. Cut out some signs, mat them on red cardstock and glue them on the
dowel. Then I adhered a piece of plaster rock and some greenery on front of the
For the gas pump (I have a pattern
on my blog) print this, and cut it out of gray board. Glue the pieces together
and cover the gas pump with red cardstock, take the smaller pattern and use
that for the yellow cardstock. Put some gold sticker lines on them and glue a
meter in the middle. I also put some Crystal laquer on that. Then adhere a
black bead on the side, glue a piece of black wire in it and tape some silver
duct tape on the end. Adhere it on top with the glue gun, and put some greenery
in front of it, put some dots on the front with a pearl pen.
Now die cut a car image you like
out of designer paper and glue that on top of the roof with a piece of acetate.
Decorate it with some artificial greenery. Stamp some flowers using black ink
on white cardstock from the window box fillers stamp, and die cut. In the
center of each flower I used a pearl pen.
Now stamp, color and die cut a car
you like and die cut the windows out, and glue 3 wooden blocks on the back.
Then you die cut the same car out of red cardstock and glue this on the other
side of the blocks. I colored the car with the markers and a silver marker and
I used the pearl pen for the mirror and wheels. Glue the car in front of the
I also cut out some gears from the
Silhouette store and I made them a little bit rusty, and I put them next to the
door and pump.