Hello Friend, How are you on this beautiful November Wednesday morning? Today is an extra special Wednesday....have you been one of those gals that has seen sneak peeks and left comments, emails, or phone calls telling us how eager and excited you are to create with the Pampered Pooch Collection! It's finally here! There’s nothing better than sharing time with your four legged fur baby, soaking in the adoration found in their bright eyes, the love displayed through their wagging tails and those endless supplies of slobbery kisses!
Many of you have been sending emails and leaving comments letting us know that you can hardly wait to get your hands on these. Some of my favorite comments were:
You've done it again Heartfelt Creations!!! The Pampered Pooch Collection is just too too cute! The artistry is amazing and I absolutely love the color palette! Definitely on my wish list! ~Janet Kerlinger Saieva
I am so excited about this collection. I just lost my Maltipoo of 16 years last month and when I saw this was coming out I knew I would need it so I could do I beautiful shadow box in memory of her. Can't wait to get it!!!! I already know which piece of paper I'm going to use....~April Catalogna
Enjoy the Pampered Pooch inspiration and watch the video below to learn how to easily create and clever cards for your pampered pooches and their owners! Hugs, Emma Lou
P.S. Are you a Platinum member? If not, find out how you can save an extra 20% on all your purchases here: http://hcgo.co/Platinum
Do you share your life with a special pampered pooch? Join Emma Lou in this video as she introduces you to the Heartfelt Creations real life fur baby who inspired the Pampered Pooch Collection as well as some cute and clever tips and techniques for creating adorable doggie themed cards! Follow along and learn various coloring, die cutting and shaping techniques
Instructions: Cut two pieces of contrasting paper together at the same time using the largest of the Spellbinders Grand Circle dies and adhere them together. Repeat this step so you have two circles with your chosen papers on the outer. Cut the base off the circles so that they are 5 1/2" tall at the tallest point. Draw a faux stitching line around the outer edges in brown ink. Glitter the paws with glitter glue. Using two dies together one from the Grand Ovals and one from the large circle dies cut two pieces of brown paper from the pad together to form the handle and adhere them together, drawing faux stitching in white pen along the outer edge. Repeat this again for a second handle. Adhere to the outer of each of the sides of the bag.
To make the box in the centre cut a piece of paper from the pad that co-ordinates with the inside of the bag 11 3/4" x 8 3/4". Score 3" on all sides and then cut each corner piece to form a tab. Fold and adhere together to form a box. Adhere the two sides of the bag to the box.
For the front of the bag cut three pieces of different papers from the paper pad. Two pieces at 4 1/4" x 4 1/4" and one at 3 3/4" x 4 1/2". Distress all the edges with the edger tool and glitter. Cut the centre of one of the card panels and distress the edges and glitter the edges and the image. Using 3D foam pads layer the three pieces of paper and adhere to the bag. Stamp, colour, cut and shape the flowers and leaves. Add prills the the flower centres and glitter the petals. Adhere to the card with a tag sentiment cut from the paper pad. Stamp, cut and colour the bone and stamp the sentiment in the middle. Adhere to the bag and glitter.
For the back of the bag create a pocket by cutting the picket fence border die in the dark brown paper from the pad. Cut a piece of paper 2 1/2" x 8" and adhere the picket fence die cut to the paper. Put glue on the edges of the bag where the pocket will be and place the paper over the side of the bag. Trim the excess away and draw the faux stiching. Cut a tag and sentiment from the paper pad and adhere with flowers to the bag handle. Adhere flowers and leaves to the pocket and the bag is complete. Just add a gift and a note in the pocket!
Instructions: Prepare a card base 6 1/4" x 6 1/4". Layer yellow and pampered Pooch paper on top after applying some of the Gold ink around the edges and adding foam to the back. Cut a piece of the Pampered Pooch paper 4 1/4" x 4 1/4", add foam and layer on top of yellow. Add to card slightly angled, add lace and adhere everything to the card base. Use the Cut Mate Create die and cut one of the card fronts from the Pampered Pooch Paper Collection out, add foam to the back and adhere to card. Stamp the middle bone on white card stock with the Dark Brown ink, add sentiment to the center cut out and add to card. Stamp the leaves and flowers on White card stock, color with the Bamboo Leaves and Dandelion ink, cut out, shape and adhere to card. To finish add Prills and glitter.
Other Products: Hydrant SVG Cut File, White Card Stock, Off-White Card Stock, Brown Card Stock, Spellbinders Petite Labels One, Derwent Water Color Pencils (Sepia #53, Raw Umber #56, Burnt Umber #54, Flesh Pink #16, Gunmetal #69, Chinese White #72, French Gray #70, Silver Gray #71, Geranium Lake # 15 and Grass Green #47), Versamark, Clear Bark Embossing Powder, Ribbon from my stash and die cutting machine
Instructions: Start by cutting and assembling the Fire Hydrant found here according to the directions found here out of Off-White card stock with the panels cut from the Pampered Pooch Paper Collection. Next die cut out of Brown card stock the fence die from the Border Essentials Die two times and layer around the bottom edge as shown. The Paw-fect Pooches Cling Stamp Set was stamped on White cardstock with Expresso Truffle ink and cut with the matching die before coloring with Derwent Water Color Pencils. The bones from the Pampered Pooch Pals Cling Stamp Set was stamped on White cardstock with Versamark and heat embossed with Clear Bark Embossing Powder and cut with the matching die. The sentiment was stamped on the die cut with Expresso Truffle Ink before lightly distressing with Expresso Truffle ink. Finally add a little ribbon and fill with treats for that special dog in your life!
Other Products: Salty Ocean, Weathered Wood, Gathered Twigs, Vintage Photo, Walnut Stain, Crushed Olive, Mowed Lawn & Forest Moss Distress Inks, Black Archival Ink, Koi Waterbrush, Sizzix Woodgrain Embossing Folder, Ebosser, Martha Stewart scoreboard, Spellbinders Deckled Mega Rectangle Large Die, Spellbinders Labels Two Die, white & watercolor cardstock, rhinestones & adhesive
Instructions: Cut a piece of 5 3/4" x 3" White cardstock, emboss it using Sizzix Woodgrain Embossing Folder & adhere it to the top of 6" x 6" white card base. Cut a piece of 5 3/4" x 2 3/4" pattern paper from Pampered Pooch Paper Collection & adhere it to the bottom of the card front.
Stamp the belt & loop image from Pampered Pooch Pals Cling Stamp Set with Black Archival Ink, die cut with matching die from Pampered Pooch Pals Die & color using Gathered Twigs, Vintage Photo & Weathered Wood Distress Inks. Cut the belt in half, assemble it as shown & adhere it to the card front on the joint of embossed panel & pattern paper. Apply 3D Crystal Lacquer on the metal part of the belt.
Die cut a piece of white cardstock with Spellbinders Deckled Mega Rectangle Large Die & ink the edges with Forest Moss & Mowed Lawn Distress Inks. Stamp the sentiment from You're Paw-fect Cling Stamp Set & Pampered Pooch Cling Stamp Set with Black Archival Ink. Color it in using Vintage Photo Distress Ink. Adhere it to the card front with Foam Adhesive.
Die cut a piece of watercolor cardstock & a white cardstock frame using Spellbinders Labels Two Die. Ink the watercolor cardstock using Salty Ocean, Crushed Olive, Mowed Lawn & Forest Moss Distress Inks. Adhere the frame on top using foam adhesive. Glue this to the card front with Foam adhesive.
Stamp the 2 dog images from Pampered Pooch Pals Cling Stamp Set on watercolor cardstock with black archival ink. Color it in using various brown distress ink pads & koi waterbrush. Adhere it inside the frame with foam adhesive. Add some rhinestones for finishing touch.
Instructions: Die cut all pieces from Spellbinders Box Card Die using manual die cutting machine and white card stock. Assemble using a strong adhesive. Ink all edges of the box card using a light brown ink. Cut a piece of white card stock to cover full back of card for personal message and to enable it to stand up securely. Trim bottom panels for box card from striped patterned paper and adhere to three sides of bottom portion, leaving reinforced back as is. Trim out two side panels using dog treat themed patterned paper and apply to opposite sides of card. Trim out one side panel for front of card using dog paw print patterned paper, as well as one longer piece to mat back wall of inside card. Trim a blue patterned paper with puppy face to mat onto front of card panel, and a longer piece of matting again with a puppy image for the inside panel of the back wall of card.
Stamp one puppy face, one shamed puppy image, and two large treats onto white card stock using black ink. Color using markers and die cut using coordinating dies. Stamp sentiments onto treats. Shape all elements using your flower shaping tools and adhere to card as shown. (To achieve layered look, attach strips of paper varying in length to images and adhere them to the various sections inside the card.)
Stamp two inkings of the daisies and one inking of leaves onto white card stock using grey ink. Color using sponge dauber and yellow ink for flowers and a mix of green inks for leaves. Cut using coordinating dies. Layer some flowers as double blossoms and leave some as singles. Adhere to box card to fill in empty areas. Adhere leaves to floral cluster as shown. Trim sentiment strip for front panel of card from paper collection and adhere to card front. Apply Diamond Stickles to flower centers and petal tips as well as printed images on front of card and inside back panel.
Other Products: Spellbinders Nestabilities Labels Twenty-Two, MICRON 08 black ink pen, Aleene's tacky glue, Blick Studio Alcohol Markers "Sienna" & "Dark Brown”, The Paper Studio butterfly paper punch, White and dark blue card stock, foam tape
Instructions: Card base is 4.5" x 4.25" from the dark blue card stock. From the white cardstock cut a 4" x 4.25" square, stamp it with the paw cling stamp, use the black ink pen to draw stitch lines all around the square. Center it on the card base.
From the designer paper die cut 2 panels using the Spellbinders die mentioned above. Layer them on the card base, centering them one on top of the other with foam tape.
Die cut a dog bone from the white card stock and inside of it stamp the heartfelt sentiment "Heard you're having a Ruff time". On the corner of the dog bone die cut stamp some paws. Also hand stitch it with the ink pen.
Stamp, color and die cut the puppy. Using the foam tape on the puppy adhere him to the bottom left hand side of the card, right above it, also using foam tape adhere the bone.
With the butterfly paper punch, punch out 3 butterflies and adhere them on the card. Use Stickles to make it sparkle and you're done.
Other Products: Green and White Cardstock, Zig Clean Color Markers 030 Red, 065-Mid Brown, 062 Dark Brown, Canson Watercolor Paper, Adhesive Foam Dots
Instructions: My card is 4 1/4" X 5 1/2". Make card base using green cardstock and mat with a piece of white cardstock. Next I picked out one of the card fronts from the paper collection and fussy cut around some of the flowers along the bottom of the piece. Stamp, cut out and color the little shaggy dog. Once he is dry I slipped him down inside the fussy cut area and made it look like he was peeping out from behind. Next I stamped and applied the Prills to the paw prints and let it dry. Stamp and color one of the bones and stamp the sentiment onto the bone. I used dimensional dots to pop up the bone.
Other Products: Black, green, yellow, and chocolate brown cardstock, Distress inks Mustard Seed, Peeled Paint, Copic markers: Y17, 13, C5, & C10, E37, 35, 33, & 31, R20, & 30, We R Memory Keepers mini alphabet punch board (cricut, dies, or chipboard can substitute), small wood laser cut dogs, (optional) pop-dots, bone folder, and paper cutter
Instructions: Start by reinforcing the score lines, with a bone folder, on the 11 3/4" X 21" Kraft flip fold insert. This will create a 4 1/2" X 8 1/2" fold out for your mini album, or a card, or a mini photo album as mine is. Stamp one large and one medium daisy, and one smiling Pooch onto white cardstock with black ink. Stamp two small daisies on yellow cardstock using black ink. Stamp two of the leaf sprays on green cardstock with black ink. Stamp butterfly onto white cardstock with black ink. Color Butterfly wings with Y17, & 13, use C10 for body. Cut all stamped images with matching dies. Sponge flower tips with mustard seed ink, and leaf edges with peeled paint. Lightly shape back of petals and leaves with 8mm tip in flower shaping kit. Snip apart leaf sprays in half. Add glue to centers of daisies and sprinkle on "Go Man Go" prills to yellow flowers and "You Had Me at Yellow" on white. Color Pooch using E37, 35, 33, & 31 for fur, R20, & 30 for tongue. Color center of nose with C5, you can add C10 to darken nose and eyes if you wish. Make sure all pieces you cut in this project get the edges sponged with Rich Cocoa ink.
Cut a 6 3/4" X 4 1/4" piece of dark green from paper pad, and one piece of striped for the underside of the flap. This piece you will die cut only the edge trim piece with holes along the scallops. For the top piece, die cut lower edge with a fancy pockets die. Glue to front flap. Cut a 4 1/8" X 4 1/2" piece with dog collar, from paper pad and glue to dark green. Add Pooch face to front as pictured with pop-dots. Arrange and glue in place daisies, then fill in and glue leaves in place. Glue butterfly in place as pictured. Die cut the small paw print using the solid die with black cardstock and outline die with brown cardstock. Glue together and add to upper right corner with pop-dots. Cut a coordinating piece of paper pad 4 1/4" X 5 1/8" and glue to first flap. Cut the sentiment from paper pad and add to bottom with pop-dots. Glue little wood dogs in place if you have them. Glue striped inside top flap in place. The paper choice from here is your choice, but here are the measurements and how many you will need: [email protected] 4" X 8 1/4" for inside left flap and back page, [email protected] 2 1/4" X 8 1/4" for right flap front and back, [email protected] 4 1/4" X 5 1/4" for inside bottom flap. Be sure to watch the video before gluing any pieces in place for magnet placement. I have pictures on my blog of each individual page of this mini album here http://www.maureensmagic.blogspot.com/.
Instructions: Finished size of the pocket is 3 1/2" x 4 3/4". Start with a kraft flipfold insert, cut patterned paper panels to decorate, ink edges of patterned paper with ground espresso distress ink, glue pocket together, add magnets, add small brads to one patterned paper panel, glue paper. Stamp collar image on kraft cardstock with black ink, cut with coordinating die, crumble piece and ink with ground espresso distress ink, glue to flap of pocket as pictured and trim excess, follow the design of the buckle with the Stardust pen and cover buckle with liquid embossing or diamond glaze. Glue a decorative frame to closure flap as pictured. Stamp sentiment on kraft cardstock, cut banner with die, ink edges and glue to pocket with foam dots. Cut small paw from kraft and dark brown cardstock, glue together and glue to pocket with foam dots.
Stamp daisy flowers and leaves on white cardstock with black ink, cut with coordinating dies, color flowers with spiced marmalade and leaves with peeled paint, shape with flower shaping kit, glue as pictured. Cut 3 large tags from kraft cardstock, cut 3 tags from patterned paper, ink edges with distress ink. Stamp sentiments on kraft cardstock with black ink, trim paper to fit your tags, ink edges with distress ink. Add some photos of your little doggies matted with kraft cardstock. Use a craft knife to cut around the dog images so you can slide the corner of the photo under the patterned paper image. Glue all pieces together to make 3 tags, add some twine to each tag. Add a twine bow to the flower on pocket as pictured. Add some glitter to flowers and prills to center of flowers.
Instructions: Stamp out pooch images on canson water colour paper, one doggie in the box and the other face of the dog from Paw fect pooches using rich cocoa on water colour paper. Using water brush, colour using the distress inks. Cut out both images using their matching dies and add glitter for detail.
Stamp and Cut two sets of delightful daisy and two sets of leaves, colour with distress inks, mold using mold mat and stylus then add prills to flower centers. Cut out two of the dog collar and ink edges and colour with vintage photo and Tahiti chalk ink. Stamp put sentiment on white card. Using dark brown card, cut out regal border to frame flap on Flipfold. Cut papers from collection to match flip folds then adhere to inside of album. Cover both front and back of flips. On inside cover, adhere the puppy face with foam adhesive. Cover front of album and album flap with paper in collection. Be sure to stamp the paw prints on cover before adhering. Cut out a card panel to measure 5.5" x 5.5" and then mat in brown card and adhere to cover as shown. Adhere puppy image, and add flowers and leaves to front cover. Attach the two dog collar pieces together and then add brads, secure around flap of album. Add flowers and leaves to flap as shown. Detail with glitter.
Instructions: Cut 6" x 6" from designer paper pad. Cut out 5 1/2" x 5 1/2" light designer paper and 5 1/2" x 5 1/2" sheet of cream cardstock and stamp the dog paws all over the cream paper. Cut a circle out of the middle of the designer paper and mount the stamp paw print paper to the back using foam dot glue. Add a plain sheet of cream cardstock to the base 5 3/4" x 5 3/4". Cut out the everyday hero die and glue on the top of the arrow and the bottom arrow so it fills the cut out circle. Cut out the dog paw die using cream and brown designer paper. Glue it together and mount in the center of the everyday hero die. Stamp and cut out the dog collar. Spritz with water and crumble up then unfold it and touch the vintage photo ink on the high spots. This will help the die cut look like leather. Run the dog collar behind the center and tack down with glue.
Stamp and cut out the delightful daisies and color the centers and the edges with the yellow ink. Mold the flowers with the shaping tool kit and add prills to the center to finish them off. Arrange on the card as shown. Stamp and cut out with a small circle die the "I wuff you" and nestle amongst the flowers. Stamp the doggie from white card stock and color in with spectrum aqua pencils, blending with water when needed. Make the dogs body dimensional with the flower shaping tool kit and then mount on the bottom right hand corner of the card adding the last two blooms around him. Finish the card off by adding to a 6" x 6" cream cardstock base.
Instructions: This pyramid card measures 20 cm x 16 cm at the base when standing. When Flat, 30 cm x 21.2 cm. You will find a tutorial HERE on how to make this pyramid card. Only I have used different measurements to make it bigger. The card stock is cut to 15 cm x 15 cm. The design paper is cut 14.5 cm x 14.5 cm. Cut the card stock and paper to these measurements x 3. Plus an extra card stock and design paper .5 cm smaller for the joining front. Before adhering together the base and matting to form the pyramid as shown in the photos on the tutorial, use the foot print die and the cut matting design paper to cut the Pooch footprints. One of the design paper cut is stamped and colored before the next step. Apply the distress ink to the edges then adhere in place. Not to forget to adhere the ribbon at the same time.
Make all the embellishments for this card. First make the daisies by stamping with the gold embossing powder, die cutting, adding color and shaping. Each flower has two layers. Adhere together. Stamp all the sentiments and Pooch images with the black ink. Cut the Sentiment to size and ink the edges. Color the remaining Pooch images and fussy cut. Adhere the sentiments and Pooch images to their place with 3d foam tape to the card base. Arrange and adhere the daisies. Make the Pooch Paw hanger by die cutting this 4 times then adhering the layers together. Stamp, die cut the dog collar loop. Fold this in half so it will hold the paw hanger. Adhere this under the daisies. To finish the card apply stickles to the flower centers, suitcase and the jean studs.
Instructions: Use a template to create a small house shaped box (for example: here). Trace the template onto chipboard sheets and cut out. Score the fold lines and adhere into place. Create a roof as a separate piece. Cover the sides and roof with Pampered Pooch paper. Cut a sheet of chipboard around 5" x 6". Cover with green patterned paper. Adhere the bottom of the house to the green covered base. Die cut a border to create the fence. Adhere to the edge of the chipboard. Stamp and die cut two dog collar images. Ink the edges. Cut one in half and invert the ends so that the end goes through the buckle. Adhere around the lower edge of the house on three sides. Die cut 2 each of the dog image, and the two smaller bones. Ink each piece, and layered together with foam dots. Adhere as shown to the project. Stamp the dog paws on the roof with embossing ink, then apply brown embossing powder and heat set. Stamp and die cut a series of small berry blossoms. Ink the middle with yellow ink, then adhere gala glitz. Adhere in sections around the base of the house.
Other Products: Paper: Neenah Solar White, Espresso (Stampin Up); Inks: VersaFine Onyx Black, Java (Quick Quotes); Accessories: Brown Twill, Dark Brown Jute String, Bow-Easy Tool (Really Reasonable Ribbon), brown twine, button, adhesive pearls, Avocado Liquid Pearls, Scotch Mounting Tape, glue dots, mineral spirits, paper stumps, Prismacolor Pencils: Sepia, Espresso, Sand, Goldenrod, Cool Grey 10, 20, 30, 50, 70%, Prussian Green, Kelp Green, Blush Pink, Henna, Pink
Instructions: Card measures 4 3/4" x 5 1/2". Cut Espresso 4 3/4" x 11", score at 5 1/2" and fold to make card base. Cut small paw print designer paper 4 1/2" x 5 5/16", ink edges with Java Ink. Wrap brown twill across mat as pictured and secure on back. Adhere to card base.
Stamp dog in crate image from You're Paw-fect Set on Solar White with Onyx Black Ink. Color with pencils and mineral spirits using paper stumps. Trim image down to 3 3/4" x 3 3/4". Ink edges with Java Ink. Cut mat with Espresso measuring 3 15/16" x 3 15/16" and adhere to image. Add mat/image to base with Scotch Mounting Tape. Add Avocado Liquid Pearls to flower centers. Add 3D Crystal Lacquer to dog's eyes. Stamp sentiment on Solar White with Onyx Black and color "YOU" letters with green pencils. Trim down as pictured, ink edges with Java and mat with Espresso. Add to card below image using Scotch Mounting Tape.
Make multi-loop bow wit Dark Brown Jute String using Bow-Easy Tool and add as pictured with glue dots. Thread brown twine in button and add to bow center with glue dots. Add adhesive pearls to top right of image.
Other Products: White card, Black card, Spellbinders Grand Squares (Retired), Zig Kuretake Pens: Dark Brown, Brown, Light Grey, Grey, Yellow and Pink, Pro marker: Cool Aqua, Watercolour card stock, Piercing ruler, Glamour Dust Quickie Glue Pen
Instructions: Cut a 4" square from the watercolour card stock and stamp image with Memento black ink. Colour in using water brush and Zig pens. I used Dark Brown, Brown, Light Grey, Grey, Yellow and Pink for the bow. When I finished colouring in I went round the edge with the Cool Aqua to make it pop. Cut a 7" by 7" white card and place one of the Spellbinders Dies in the middle and debossed it onto the card. I then went round with a Piercing Ruler. On another piece of card I made a frame from the spellbinders dies to mount over the 7" by 7" card. Cut black card 7 1/4" by 7 1/4", white card 7 1/2" by 7 1/2", mount all up and then place your topper at an angle. Use your quickie glue pen and sprinkle a little Glamour Dust.
Other Products: CTMH Ink- Chocolate, ColorBox Ink- Gingersnap, May Arts Ribbon (Brown Silk, Natural Burlap String), Tombow (Mono Aqua, Xtreme Adhesive, 3D Foam Tape), Button, Cardstock (Chocolate, White), Silver Sharpie
Instructions: Brown cardstock is your largest layer. Cut the paw print patterned paper to 11.5" x 11.5". Tear the light brown patterned paper to about 11" x 11" or a little less. Adhere these layers together.
Cut a piece of the blue patterned paper that is 6" x 9.5" and adhere to the right hand side of the layout. Cut out the 6" x 6" bones patterned paper and adhere on top of the blue patterned paper. Cut a strip of the dark brown patterned paper that is 2" x 10", and adhere across the layout. Cut out the border strip and cut it in half and adhere to the top and bottom of the blue patterned paper. Cut a strip of the striped patterned paper that is 2" x 12". Cut a strip of the dark brown patterned paper that is 1.5" x 12". Adhere these layers together and then to the layout.
Stamp and die cut each of the 3 bones, and 3 of the dog collar. I added colour to all of these using inks and daubers. I coloured the clasp of the collar using a silver Sharpie. I pieced together the collar border to make a 12" strip. Where the seams were, I added ribbon knots, and then extra ones to make it look symmetrical. Adhere to the layered border strip.
Find and cut out the larger light brown journal block and adhere to the layout under the left hand side of where your photo will be. Find and cut out the small blue journal block, adhere to the left hand side of the photo. Find the small dark brown tag, add a burlap string bow and adhere to the left of the photo also. Mat your photo in white, brown and white again. Adhere to the layout using 3D foam tape. Find the title “My Furry Best Friend” and add it to the left hand side of the layout. Add the three bones layered at the top of your matted photo. The medium sized bone I added a burlap string bow. I added some paw prints around the layout using chocolate ink. I stamped the saying “Life is better with you in it”, down at the bottom the blue patterned paper. I added my button next to that.
Other Products: Spellbinders Nestabilities Dies Stars, Cuttlebug Die Cutting Machine, StazOn Archival Ink (Timber Brown), Prismacolor Pencils (PC901, PC945, PC946, PC947), Odorless Mineral Spirits, Rangers Distress Ink (Stormy Sky, Vintage Photo), Tim Holtz Paper Distressor, embossing tool, white floss, cardboard
Instructions: Distress a 12" x 12" sheet of paper from the Pampered Pooch Paper Collection with the Tim Holtz Paper Distressor and with water, and ink the edges with Vintage Photo distress ink. Die cut a few borders from the Border Essentials Die and tuck in random spots around the edges of the page. Adhere the pattern paper onto a brown cardstock. Trim a coordinating piece of pattern paper from the same collection to 8" x 7" and another one to 1.5" x 7". Distress both of these papers and ink with distress ink. Layer them in the center of the page. Rip a piece of cardboard approximately to 6" x 6.5", ink the edges and adhere over the center of the page. Mat your two 3" x 4" pictures over this layer. Stamp and die cut using the coordinating die the large dog collar from the Pampered Pooch Pals Cling Stamp Set. Stamp your title on it and wrinkle and ink it to make it look old and worn. Stamp the mom and puppy image as well as the puppy border from the same set. Color and die cut using their coordinating dies. Add to layout as shown. Stamp different sentiments on a white piece of cardstock in alternating blue/brown color ink. Trim and add to page on the right side of the photos. Die cut a few different size stars from blue cardstock and stamp the large paw print on the 2 smaller ones. Hand-stitch around the edges of the stars with white floss and adhere to layout. Finally, stamp the "You are Pawfect" sentiment inside a bone stamped image on brown cardstock and die cut it with it's coordinating die. Adhere over large star on left side of photos. Add 3-D Crystal Lacquer over the large paw print stamped images and sentiment title for a shiny finish.
Instructions: Begin with a 5" x 7" blue card stock base adding 3 different designer papers from the Pampered Pooch collection as shown in the photo. Stamp the pooch in the suitcase, the collar and collar tab onto Cryogen metallic paper with Memento Tuxedo Black ink. Die cut the collar and tab with the coordinating dies; cut an additional collar and glue them together to give it some dimension. Color the collar and tab with Copics: B23, C4 and add some Silver Gelly Roll accents. Adhere along the right side of the card and add the Heart charm to the collar. Fussy cut the dog in suitcase image and color with Copics listed above. Adhere to the card front with dimensional foam. Trim out the Life is Better sentiment panel, back with blue card stock and add as shown in photo.
Using the Classic Rose cling set, stamp an assortment of petals to create 2 small roses and 1 medium rose with Memento Danube Blue ink onto Cryogen Metallic card stock. Use a sponge dauber to add additional color. Use the Deluxe Flower Shaping Kit to shape the flowers. Adhere the completed flowers to the card front with Designer Dries Clear Adhesive. Stamp the leaves from the Classic Rose cling set with Memento Tuxedo Black ink and add color with Copics G24, G43, G46. Add some dimension with the Deluxe Flower Shaping Kit and adhere around the flowers with Designer Dries Clear Adhesive.
Other Products: White and Green Cardstock, Spellbinders Flourish Trim Die, Scor-Tape, Glossy Accents, Faded Jeans, Bundled Sage and Vintage Photo Distress Inks, Distress Glaze, Half Pearls, Dimensional Tape
Instructions: Card size is 5 1/2" X 5 1/2". Make card base and set aside. Cut out the Flourish Trim and glue to the top of the card base and then cover the front with a piece of the paper collection. Stamp, cut out, color and shape the rose and leaves and glue the petals to make the rose. Glue the flower and leaves to the corner of the card front. Glue the half pearls in the other corner. Next I cut out a sentiment from the paper collection and mounted it onto a piece of green cardstock. I used dimensional tape to mount it to the top of the card.
Other Products: Rich brown heavy card stock, beige card stock, X-press It (or any Copic Compatible card stock), Copic markers: C3, C6, E30, E33, E35, G17, G21, G40, G45, Colored Pencils: dark grey, dark brown, double sided tape, heart shaped sequins
Instructions: Cut a rich colored heavy brown card stock at 5 1/2" x 8". Score the paper at 4" to create a top-fold card. Cut beige card stock at 5 1/4" x 3 3/4". Cut another beige layer for the inside of the card so you can write a personal note. Adhere the beige layer to the top of the card using double sided tape.
Stamp the row of adorable little pups from Paw-fect Pooches Cling Stamp Set using Tuxedo Black Dye Ink and Copic Compatible white paper. Stamp the Bone on Copic Compatible paper. The sentiment "woof" was stamped on the bone. The pooch images and bone were colored using Copic Alcohol Ink Markers. I used C1, C3, C6, E30, E33 and E35. I wanted to add more texture to the images so I used some dark grey and dark brown colored pencils to the darkest shadows. (I love adding extra texture but if you try this, make certain to apply the colored on top of your Copic or alcohol ink markers and not under the markers. You don't want a waxy build-up on your marker nibs.)
The pooches and bone were cut with the coordinating die cuts. I used a large ball tip from the Flower Shaping Kit to lightly apply a circular pressure on the underside of the head, body parts and ends on the bone to add some dimension. I adhered the pooches to the card with Designer Dries Clear Adhesive and added some Copic green with my markers for the grass. I like to use both the flicking and dotting technique to create grass. I used G17, G21, G40, G45. I used the Designer Adhesive to add the brown shadow of the bone to the card stock. I popped up the colored layer of the bone using foam dots for dimension. The final touch is to add heart shaped sequins to the card using the Dries Clear Adhesive.
Instructions: Cut a 6" x 12" piece of kraft cardstock, crease at 1 1/2", 3" and 7 1/2". Fold at creases to create a 4 1/2" x 6" card base. Cover panels with Pampered Pooch paper collection. Cut out 3 card fronts from paper collection, mat with kraft cardstock and then adhere to card base using foam tape.
Stamp puppies from Paw-fect Pooches stamp set on white cardstock with brown ink, die cut with coordinating die. Color with Copic markers and adhere to card front panel.
Stamp Delightful Daisies on white cardstock with Peanut Brittle ink, color center of daisies with the same ink. Stamp leaves on green cardstock. Shape daisies with Deluxe Flower Shaping Kit, embellish center of daisies with Prills and then adhere to card. Glue leaves under daisies as pictured.
Instructions: To create this bendi card, I used my Silhouette digital cutter to cut the base for the card. Before assembling the card, I covered the pieces with patterned paper from the collection. Plus I used the picket fence from the Border Essentials die to die cut the bottom piece. Then I assembled the card. Once assembled I decorated the card using the Delightful Daisies stamp and matching dies. Plus I stamped various images from the Pampered Pooch collection onto mixed media paper using Jet Black staz-on ink and colored them with Sparkle Markers. After they were colored and dried, I used the matching dies to cut them out. I also stamped one bone and cut it. Then I stamped the sentiment and used the medium bone die to cut it out. The heart is one of the negative pieces from the paw die.
Instructions: Make the card base from Ivory coloured card stock measuring 7" x 5". Make the second matte layer from the same card stock 5" x 5". Adhere pattern paper from the paper pad on the card front and matte layer a little smaller than the main layer. Distress the edges with Espresso Distress ink. Adhere the matte layer on the main card front a little on the right side. Stamp out the image of the belt two times on brown card stock with black memento ink. Cut out with Coordinating die. Add three eye lets with a Crop-A-Dile in the three holes. Adhere as shown at the base of the card.
Stamp out daisy flowers and leaves from the Daisy cling stamp with black ink, and colour using Harvest ink. Colour the leaves green. Cut out the flowers and leaves with coordinating die. Shape and mold with the Deluxe flower making tool kit. Layer the flowers using clear adhesive and apply a dot in the centre. Mix the two prills together and apply in the centre. Let it dry. Arrange the leaves and flowers on the card as shown.
Cut out the bone shape from the pattern paper. Stamp out the two sentiments as shown. Stamp the dog image in black ink and colour with copic markers. Fussy cut the image and add to the centre. Cut the botanic orchid window die and colour with black and brown ink. Adhere to the matte layer. On this adhere the coloured doggie image. Tuck in a few swirls from coloured bella rose die cut. Pampered Pooch card is ready.
Instructions: Using the Ivory Card Stock cut to 5 1/2" x 11", score at 2 3/4" and 5 1/2", fold to achieve the fold. Cut the pampered Pooch paper 1/4" smaller for the outside and inside. Cut the Oval die out, layer one of the card fronts on top that you have trimmed to an oval. Cut the sentiment out, use Double Dots and add the sentiment and image to the card.
Stamp the flowers and leaves on white cards stock with the Dark Brown ink, color the leaves with Bamboo Leaves and the flowers with Dandelion, cut out, shape and add to card. To finish add Prills and Stickles.
Instructions: The ready side-fold card measures 8 1/4" by 6 1/4". The first layered mat is with designer paper from Pampered Pooch Collection. For the window I have cut a frame using second and third die of Spellbinders Grand Label 1. Layer a floral pattern paper from the same collection to the window. To embellish the card I have stamped images from Pampered Pooch Cling Stamp Set (HCPC-3762) with black Archival ink on smooth white card stock and painted using Zig Clean Clear Brush Markers. The colors used are 061, 062, 091, 092 and 025. The images are then cut using their coordinating die set. The fence is fussy cut from the Pampered Pooch designer Paper Collection. The flowers are made using Delightful Daisy die and painted using Sunflower ink from Archivals. The pollens of the flowers are made using the stamen die from Sunrise Lily Die Set HCD1-787 and painted using Sunflower and Olive Green shade of Archival inks. The leaves and vines are painted with Leaf Green, Olive Green and Plum of Archivals. Follow Emma Lou's Tutorial for shaping flowers and leaves. Once all the elements are ready, assemble the card as shown. All the elements are layered using Glue dots and the sentiment is fussy cut from Pampered Pooch Collection Designer Paper.
Instructions: Create a 6" x 6" side folding card base out of Brown Cardstock. Cut the 6" x 6" card front from the Pampered Pooch Paper Collection and die cut the center using the Spellbinders Circles Large Die. Adhere the 6" x 6" card front to the card base using pop dots. Sponge edges of die cut circle with Bamboo Leaves Memento Ink and adhere directly to brown card base.
On White Cardstock with Tuxedo Black Ink stamp the medium sized bone and the large dog head using the Paw-fect Pooches Stamp Set and die cut with the coordinating Paw-fect Pooches Die Set. With Tuxedo Black Memento Ink stamp the "You're Pawfect" sentiment from the You're Paw-fect Stamp Set. Color bone with Toffee Crunch and Desert Sand Memento Inks using sponge daubers and color the dog head using Copics.
On White Cardstock with Rich Cocoa Memento Ink stamp the daisies and with Northern Pine Memento Ink stamp the leaves from the Delightful Daisies Stamp Set and die cut with the coordinating Delightful Daisies Die. Color daisies with Cantaloupe Memento Ink and the leaves with New Sprout and Bamboo Leaves Memento Inks using sponge daubers. Shape daisies, leaf, dog head and bone with Deluxe Flower Shaping Tool Kit. Layer daisy as shown and add Third Place Prills to center of daisy and to daisies on the design paper with Dries Clear Adhesive. Adhere daisy and leaves to the card as shown. Add Leia Glitter to the daisy and to the daisies and butterflies on the design paper and add Lichen Glitter to the leaf and to the leaves on the design paper using Dries Clear Adhesive. Add Gingerbread Glitter to the dog head and bone using Dries Clear Adhesive. Adhere dog head to card front using an Action Wobble Spring and adhere bone using pop dots. Adhere Silver Rhinestone to upper right hand corner. Add 3D Crystal Lacquer to the dogs nose and tongue.
Other Products: White, Taken with Teal and Chocolate Chip cardstock, Versamark Ink, Chocolate Chip ink, Peacock Feathers Distress Ink, Ranger Clear Embossing Powder, Ranger Copper Embossing Powder, Tim Holtz Philosophy Tags, Crop-a-Dile Corner Rounder, two 6mm jump rings, Spellbinders Nestabilities Beaded Oval Dies set, Copic Markers: C10, E42, E44, E47, R29 and BG45, Sakura White Gel Pen, foam tape
Instructions: Create a 4" by 6 1/4" card base from white Cardstock and round all the corners. Trim a piece of Chocolate Chip cardstock to 3 3/4" x 3" and round the corners on one end. Attach to the top half of your card base with rounded corners aligned at the top, leaving about a 1/8" white border. Trim a piece of Taken with Teal cardstock to 3 3/4" x 3" and randomly stamp the paw print from the You’re Paw-Fect Cling stamp set in Versamark ink. Heat set with Clear Embossing Powder. Round the corners at one end and adhere to the bottom half of the card front so the rounded corners align at the bottom, leaving about a 1/8" white border. From white cardstock, die cut the largest oval from the Spellbinders Nestabilities Beaded Oval dies. Leave the die cut in the die after cutting and lightly sponge Peacock Feathers Distress ink onto the die cut. Adhere the die cut to the top third of the card front.
Stamp the pup from the Pampered Pooch Pals Cling Stamps onto white cardstock with Chocolate Chip ink. Die cut with the coordinating die from the Pampered Pooch Pals Die set. Color using C10, E42, E44, E47, R29 and BG45 Copic markers. Adhere the pup using foam squares to the oval. Stamp the collar image from the Pampered Pooch Pals Cling Stamps set onto Chocolate Chip cardstock with Versamark ink. Heat emboss with Copper Embossing Powder and die cut the collar with the coordinating die. Cut the collar in half, then “buckle” the uncut ends together. Link a 6mm jump ring to the buckle of the collar. Link another 6mm jump ring to a Philosophy Tag charm, then connect the two jump rings so the charm dangles from the collar. Finish the card by adding stitch marks with a white Gel Pen to the card.