Blog Menu

Blushing Rose Inspiration + so much more:)

Hi Friend,
How is your week going? Have you taken time to create something beautiful this week?  If not......I invite you to block out a couple minutes to be inspired with all the new projects that will not only inspire you to create something beautiful, but also get you started on creating the most beautiful dimensional cards featuring the elegant roses. In talking with hundreds of  crafters, a huge number say that roses are their favorite flower to create!  If you have never created dimensional roses before or they look super complicated, I challenge you to create some today and you will be a rose shaping queen in no time!  https://youtu.be/Z8P070kC3oo

If you missed out on the launch of the Blushing Rose Collection (which is primarily featured with the projects you will see below). Make sure to follow this link:  http://hcgo.co/BlushingRose  to discover all the amazing details. Make sure to order yours today so that you can get started creating your Blushing Rose masterpieces right away and bring that extra special handmade touch to your friends and family......

Have a wonderful day and thank you for being part of the Heartfelt Creations crafting community! Together, we are making a difference, one card at a time:)

Hugs, Emma Lou

Are you a Platinum member? If not, find out how you can save an extra 20% on all your purchases here: http://hcgo.co/Platinum



Creative Inspiration of the Week

Red Rose Clusters Congratulations

Red Rose Clusters Congratulations
Products Used
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Embossing Powder - Gold, 359760
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Classic Rose Paper Collection, HCDP1-270

Instructions

Other Products: Card stock: A4 Crafters Companion white hint of gold 300gm, Other card stock: Winter white, Red and Green; Other: Spellbinders Sentiments one, Heat gun, Hot glue gun, Versa-mark, Walnut stain distress ink, Foam inking tool, Double sided tape

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: This is a Z slider card measuring 21 cm x 17.5 cm when finished. Please note all the stamping is done in gold embossing powder.

To make the card base: Taking the A4 cardstock and score at 6 cm and at 12 cm along the long edge. Fold into valley and hill folds. This will form the card front foot (6 cm x 20.8 cm) and card front background (17.7 cm x 20.8 cm). For the slider, cut 11.5 cm x 7 cm. For the card front cut 14 cm x 17 cm. All the matting layers will be cut at 2 mm smaller each side. Cut one matting layer in each of the red card stock and the design paper found in the paper pad to fit all the card base elements. Ink the edges of the design paper with walnut stain ink. Adhere all the matting layers together, except the top edge of the card front and the first matting layer. This is so you can slide the slider between the card stock layers. If you forget to do this, don't panic. Then you make a band measuring 16.5 cm x 2 cm and adhere to the top back side of the card front. Use this for the slider guide. Adhere the slider to the top center of the card background front. (Make sure you do not place the glue and double-sided tape too low. If you do this, the card front will not sit flat when closed. If this happens, make a slider guide for the back and place it lower in the back.) Adhere the card front to the center of the card foot. Slide the slider into place.

Stamp, color and shape the roses, leaves. Arrange and trim the leaf vines as needed for a base for the roses. These are adhered by using the clear drying glue, this is so they can be slid into place. Four rose cuts are used to make each rose. Three cuts for the fuller rose buds. One cut for each of the small rose buds. The sentiment is cut x 5 from the winter white card stock and the layers adhered with the clear drying glue. The roses are adhered together with the hot glue gun. The hot glue gun is also used to adhere the roses to the card front.

Created by: Susan Smit

Print Project

Regal Thoughtful Roses

Regal Thoughtful Roses
Products Used
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Regal Borders and Pockets Die, HCD1-779
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Ranger Distress Crayons, Spellbinders Platinum Die Cutting Machine, Water Color Cardstock, Metallic White Cardstock, kraft Cardstock

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection. Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: Create a 6 1/2" x 6 1/2" card base from white cardstock. Cut 2 smaller panels from kraft cardstock and Blushing Rose Paper Collection and adhere to card. Die cut 2 Regal Borders from white metallic cardstock and adhere to center panel as pictured.

Stamp Blushing Rose Stem on white cardstock with black ink, color with Distress Crayons and then die cut with coordinating die. Glue rose stem to center of card.

Stamp multiple flowers and leaves using Classic Rose stamp set on watercolor cardstock with black ink, die cut with coordinating dies. Color flowers and leaves with distress crayons, shape with Deluxe Flower Shaping kit and then adhere to card.

Cut out sentiment from paper collection and glue to center of card.

Created by: Marisa Job

Print Project

Beautiful Teal Rose Spray

Beautiful Teal Rose Spray
Products Used
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Ornate Borders and Pockets Die, HCD1-780
Glue Tip Pins, PIN6
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Blushing Rose Background Cling Stamp Set, HCPC-3757
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Distress inks Peacock Feather, Scattered Straw, white heat embossing powder, Versamark, Heat gun, Spellbinder's Label 17, Smooth white card stock, Glitters and stickles

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection. Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: The card base measures 6 1/2" by 7 1/2". Choose pattern paper from the same collection and cut half inch smaller to the card base. Layer the same on card base using dimensional tape. For the front panel cut black card stock measuring 6 3/4" by 5". Give a layer of white card stock and scored card panel, distressed with Peacock Feather. For the top most layer cut a piece of white panel using Spellbinder's Label 17. Stamp the background stamp from Blushing Rose Collection with Versamark and sprinkle white heat embossing powder. Dust extra and heat set it. Distress the panel using Peacock Feather and Scattered Straw Distress inks. Cut 2 frames using first and second die with Label 17 and add clear glitter using adhesive that dries clear on one frame and glitter that matches the card on second frame. Layer all the elements as shown. The flowers are created using Classic Rose Stamp Set and Die and painted with Color Box Teal Zeal ink. For shaping and coloring flowers, follow Emma's tutorial. For the flower bouquet I have used Ornate and Border Die as a base. For More detailed pictures visit my website www.rajnichawla.com.

Created by: Rajni Chawla

Print Project

Creamy Teal Rose Swirl

Creamy Teal Rose Swirl
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
White Gala Glitz, 12wht
Luggage and Tags Die, HCD1-745
Deluxe Flower Shaping Kit, HCST1-401
Embossing Powder - White, RPEJ685
Fleur Borders and Pockets Die, HCD1-778
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: White, light aqua cardstock, Strathmore Bristol watercolor paper, aqua organza ribbon, three large flat backed pearls, 2mm pearl string, Darice dotty embossing folder, Versamark ink, Zig Clean Color Real Brush water color markers, 031 Cobalt Blue, 041 Light Green, 050 Yellow, 070 Orange, 100 Dark Gray, small watercolor brush, (or aqua brush if preferred), small corner rounder punch, pop-dots, heat tool and die cutting machine of choice

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Make a 6" X 6" white card base, 12" X 6" paper, score at 6" and fold. Cut a 5 7/8" square of light aqua cardstock, glue to card front. Cut a mat of white cardstock 5 3/4" square. Emboss this with dotty folder. Cut a 7" length of ribbon and glue 1" down from top and secure end to the back. Glue this to card front. Cut four of the straight border from the Fleur die set from 1 1/4" strips of white cardstock. Overlap corners by matching holes and glue together to make a frame. Center the frame on card front and glue in place. Glue tiny pearl string around edges as pictured. Add a pearl in upper left, lower left and lower right corner of frame.

Stamp image onto watercolor paper with Versamark, dust with embossing powder and heat set. Stamp three of the medium large rose petal on watercolor paper using the same technique. Watercolor the petals of all using 031. Watercolor centers with 050 and add a touch of 070 on one side of centers. Watercolor leaves with 041. Watercolor a shadow around large image using 100. When dry trim to 4" square and punch corners. Shape three extra petals and off-set and glue to large flower in image. Using pop-dots for dimension, add the image to center of frame. Cover centers with glue and sprinkle with Glitz. Cut the "Cherish" tag using luggage die set and attach to upper right with a pop-dot on the upper part of the tag. Make a small bow and glue over hole in the tag to complete your card.

Created by: Maureen Russell

Print Project

Lavender Rose And Dress

Lavender Rose And Dress
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Fantastix Blending Tool, 247027
Memento Dye Ink Pad - Cantaloupe, TSMP103
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Berry Blossoms Cling Stamp Set, HCPC-3731
Berry Blossoms Die, HCD1-793
Memento Dye Ink Pad - Sweet Plum, TSMP506
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: White Cardstock; Spellbinders Classic Circle - Large; Spellbinders Classic Circles Scalloped - Large; Want2Scrap 72 Count - White Pearls, Lavender Pearls; Art Glitter Transparent Hologram - Leia

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Create a 6" x 6" card base out of white cardstock. Next take a 6" x 6" card front from the Blushing Rose Paper Collection and die cut out the center using the Spellbinders Circles Die. Adhere card front to card base. Sponge edges of die cut circle with Lulu Lavender Memento Ink. Die cut a piece of blue design paper from the paper collection using the Scalloped Circles Spellbinders Die and sponge edges with Teal Zeal Memento Ink. Matte circle on die cut scalloped circle and adhere to card front with pop dots. On white cardstock with Tuxedo Black Ink stamp the rose image from the Classic Rose Vines Cling Set, stamp the rose petals and rose buds from the Classic Rose Cling Set and stamp the blossoms from the Berry Blossoms Cling Set. Die cut all with coordinating dies. Cut the buds off the rose image so they can be adhered separately on the card front. Color centers of blossoms with Cantaloupe Memento Ink using a Fantastix. Using a sponge dauber color the petals and rose using Lulu Lavender and Sweet Plum Memento Inks and the leaves using New Sprout and Bamboo Leaves Memento Inks. Shape all with Deluxe Flower Shaping Tools and assemble as shown, adding to the card front as shown. With Dries Clear Adhesive add Leia Glitter to blossoms, roses, leaves and flowers on dress on design paper, as desired. Cut sentiment from Blushing Rose Paper and sponge edges with Sweet Plum Memento Ink. Adhere to card with pop dots. Adhere Lavender and White Pearls to corner.

Created by: Candy Slabaugh

Print Project

Pale Lavender Rose Spray

Pale Lavender Rose Spray
Products Used
Crystal Ultrafine Transparent Glitter, 85-glitter
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Ranger distress inks: Shaded lilac, Pine Needles, Peeled Paint, Shabby Shutters, Want 2 Scrap self adhesive bling, May arts twine

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Fold a piece of white cardstock to form a 6" x 6" card base. Cut a mini print from patterned paper. Distress the edges, and adhere to the card base. Cut a medium panel from patterned paper and distress the edges. Adhere horizontally along the base of the card using foam dots. Cut another medium panel and distress the edges. Adhere with foam dots on an angle over the right side of the card. Stamp a rose vine image onto white cardstock and colour with distress inks and a sponge dauber. Die cut and shape with a stylus. Adhere around the left side of the top layer. Stamp a rose stem and colour in the same manner. Die cut and shape, then adhere tucked under the top left corner of the card. Stamp and colour several sets of petals. Die cut and shape. Layer together to create dimensional roses. Adhere a large one inside the vine on the left of the card. Tuck three additional smaller roses around the large rose. Cut a sentiment tag from patterned paper. Shape the tag, then adhere tucked into the left side of the floral cluster. Add some self adhesive pearls to the right of the sentiment. Add some coils of twine into the left of the floral cluster. Apply fine glitter to the details of the leaves and flowers.

Created by: Alicia Barry

Print Project

Lavender Rose And Tag Card

Lavender Rose And Tag Card
Products Used
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Luggage and Tags Die, HCD1-745
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Deluxe Flower Shaping Kit, HCST1-401
Ornate Borders and Pockets Die, HCD1-780
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Die, HCD1-7110
Classic Rose Vines Die, HCD1-7111
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Purple and white cardstock; lilac distress ink; green ink pad; sponges, rhinestones, 3d foam squares

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection. Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: Finished card measures 4 1/4" x 5 1/2". Create base of card from purple cardstock. Cut patterned paper panel from Blushing Rose paper collection. Cut white panel slightly larger than panel and adhere together. Die cut a ornate border from white cardstock. Adhere into place. Stamp flowers onto white cardstock using toffee ink. Stamp vines onto green patterned paper using green ink. Die cut the vines and flowers. Use the deluxe flower shaping kit to shape the leaves and flowers. Die cut the tag and sentiment tag from collection using the matching dies. Assemble the card together as shown using 3d foam squares for the tags.

Created by: Debbie Seyer

Print Project

Violet Anniversary Roses

Violet Anniversary Roses
Products Used
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Toffee Crunch, TSMP805
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Purple and White Cardstock, Canson Watercolor Paper, Peeled Paint, Shabby Shutters and Dusty Concord Distress Ink, Distress Glaze, Scor-Tape, Hot Glue Gun, Spellbinders Radiant Rectangles Dies, Dimensional Tape

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: My card measures 4 1/4" X 5 1/2". Make card base using purple cardstock. Cover with one of the card fronts from the gorgeous papers. Next stamp the vines and use distress inks and a brush to color in the leaves. Allow to dry and use the matching die to cut out. Apply this to the bottom of the card front and let dry. Next I stamped the flower petals and cut them out using the matching die. Color the tips with Dusty Concord ink and then use the Distress Glaze over that to set the color. Now you can wet the petals and shape and when they are dry you can glue them to form the roses. I used hot glue to glue the rose and the rosebuds to the bottom of the card. Next I chose my sentiment and stamped it on white cardstock and cut out using the die. Then I cut out the base piece for the sentiment using purple cardstock. Use dimensional tape to give this sentiment dimension.

Created by: Glenda Brooks

Print Project

Lavender Beautiful Tag

Lavender Beautiful Tag
Products Used
Designer Dries Clear Adhesive, 159723
Dove Blender Kit, 241159
Memento Dye Ink Pad - New Sprout, TSMP704
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Decorative Oval Die, HCD1-762
Classic Rose Paper Collection, HCDP1-270
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Background Cling Stamp Set, HCPC-3757
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Spellbinders Standard Circles Large and Small, White Cardstock, Purple Cardstock, Canson Watercolor Paper, Gold Embossing Powder, Dusty Concord Distress Ink, 6mm Half Pearls, Scor-Tape, White Seam Binding, Dimensional Tape

Instructions: My tag measures 4" X 6 1/2". Make the tag using watercolor paper for strength. Cover with a piece of the Blushing Rose Paper Collection. Next I stamped and embossed the Blushing Rose Background Cling Stamp and then set the tag aside while I worked on the other elements. I dyed a piece of the seam binding using Dusty Concord Distress Ink and set it aside to dry. Next I used the circle dies to cut out a frame using purple and white cardstock. I used a circle piece of paper from the Classic Rose paper collection to go behind my circle for contrast. Cut out the Decorative Oval and then use one of the circle dies to make it fit my frame. Now glue all layers of the frame together and let dry. Once dry I added the half pearls and glued them down. I stamped and cut out the roses and leaves and colored it with Memento Ink on the leaves and Distress Ink for the rosebuds. (The Dove Blender Pen works wonderfully for this.) I used dimensional tape behind the roses and mounted it to the circle piece. I also used dimensional tape to apply the circle piece to my tag. Next tie the bow and adhere to the bottom of the tag.

Created by: Glenda Brooks

Print Project

Purple Rose Trio

Purple Rose Trio
Products Used
Decorative Blossom Corner Die, HCD1-729
Spring Bling Prills - 12 Pack, ANC850
Deluxe Flower Shaping Kit, HCST1-401
Sunrise Lily Die, HCD1-787
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Worn Lipstick, Squeezed Lemonade, Dusty Concord, Peacock Feathers, Crushed Olive, Mowed Lawn & Forest Moss Distress Inks, Ebosser, Martha Stewart scoreboard, Spellbinders A2 Scalloped Borders Three, white cardstock, pearls, rhinestones, pollens & adhesive

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Cut a piece of 5 3/4" x 5 3/4" pattern paper from Blushing Rose Paper Collection & adhere it on a 6" x 6" white card front. Die cut a piece of white cardstock with Decorative Blossom Corner Die & adhere it on the top left corner of the card front as shown. Cut another piece of 5 3/4" x 5 3/4" pattern paper from Blushing Rose Paper Collection, fold over the top left corner & adhere it on the card front as shown.

Die cut a border from white cardstock & Spellbinders A2 Scalloped Borders Three die, ink with Peacock Feathers distress ink & adhere it on a piece of slightly smaller  pattern paper from Blushing Rose Paper Collection. Adhere this on the card front with foam adhesive.

Stamp the leaf stamp from Blushing Rose Swirls Cling Stamp Set with Forest Moss Distress Ink on a piece of white cardstock & die cut it with matching die from Blushing Rose Swirls Die. Ink it with Crushed Olive & Mowed Lawn Distress Inks. Shape it using Deluxe Flower Shaping Kit & adhere to the top right of card front.

For the small flowers: Stamp the flower images from Classic Rose Cling Stamp Set with Squeezed Lemonade distress inks & die cut using matching dies from Classic Rose Die. Ink the centers with squeezed lemonade distress ink. Shape the flowers using Deluxe Flower Shaping Kit. Ink the petals lightly with Worn Lipstick Distress Ink. Add pollens to the flower centers.

For the big flowers: Stamp the flower images from Classic Rose Cling Stamp Set with Dusty Concord distress inks & die cut using matching dies from Classic Rose Die. Ink the petals with same ink. Shape the flowers using Deluxe Flower Shaping Kit. Die cut the flower centers from Sunrise Lily Die, ink with Crushed Olive Distress Ink & glue Lemon Chiffon prills from  Spring Bling Prills on the stamen ends. Add these to the flower centers.

Arrange & adhere the flowers & leaves as shown. Add some pearls & rhinestones for finishing touch.

Created by: Nupur Priya

Print Project

Peacock And Rose Wall Hanging

Peacock And Rose Wall Hanging
Products Used
Designer Dries Clear Adhesive, 159723
Peacock Swirls Cling Stamp Set, HCPC-3660
Deluxe Flower Shaping Kit, HCST1-401
Peacock Paisley Die, HCD1-771
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: White Cardstock. Black Stazon Ink, Rose Red Ink, Blushing Bride Ink, Cucumber Crush Ink, Spectrum Noir Silver Glitter Pen, Wink of Stella Clear Glitter Brush Pen, Garden Green, Rose Red Stampin Up Markers, Silver half-back pearls, Yard sale find coaster, painted to match color palette, aluminum craft sheet, hot glue gun, scrap cardboard piece

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Final project is approximately 10" in height and width. From scrap chipboard or cardboard, rough cut a circle about 6" around and set aside. Cut four 12" x 5" strips of paper from the paper collection. Score all the strips at 1/4" intervals and accordion fold. Attach end to end with Dries Clear Glue. Stand on end to form a cylinder over the rough cut circle. Gather the top of the cylinder to form a “tee pee” shape, then push down to flatten onto the cardboard, using hot melt glue to adhere in place. Adhere a painted coaster, or other decorative circular element to the center of the disk.

Stamp and die cut the peacock with Black Stazon Ink from aluminum craft sheet. Adhere to center of disk with hot glue. Using the Classic Rose Cling Stamps and matching die, create three to four large and medium roses and three to four rose buds with Rose Red Ink on white cardstock. Sponge Blushing Bride Ink to tint the roses and paint with Clear Glitter Brush Pen. Stamp the Rose Cascade image with Cucumber Crush Ink onto white cardstock. Color with Garden Green and Rose Red markers. Paint over rosebuds with Silver Spectrum Noir Glitter pen.

Adhere the Rose Cascade and prepared roses and rosebuds to the front of the disk using the sample as a guide for placement. Embellish with silver half-back pearls.

Created by: Anne Harada

Print Project

Blue Rose Stems And Tags

Blue Rose Stems And Tags
Products Used
Regal Borders and Pockets Die, HCD1-779
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Chip board butterfly from Creative Embellishment, Stickles in Gold and Star Dust, 3 pearl brads, black card stock, paper crinch tool, Blick markers in Horizon Blue, Celedon Green, Lt Cerulean Blue and Green Tomato

Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: Start with a card base 7.5" x 6.25" and fold in half. From black card stock cut 3.75" x 6.25", from designer paper cut 3.5" x 6" and layer these on card base. Die cut two borders from the Regal Borders, cutting the bottom part from the black card stock and the top portion from the designer paper. Attach these borders to either side and attach to the card base.

Die cut 3 of the pre printed tags. I ran mine thorough a paper cringer and attached them to black card stock. Added the pearl brads to attach the tag toppers. Stagger the three tags on the card. Stickle one of the Creative Embellishment chipboard butterfly and tuck in between the tags.

Stamp, color and die cut the rose buds and the foliage. Attach the to the bottom left hand side of the card. I fussy cut one of the small butterflies from the paper collection and centered it on the flower stems. Attached one of the Sentiment tickets from the collect and added Star Dust stickles to the flowers.

Created by: Elsa Sapp

Print Project

Blue Majestic Blooms Anniversary

Blue Majestic Blooms Anniversary
Products Used
Vintage Morning Background Cling Stamp Set, HCPC-3577
Majestic Blooms Die, HCD1-742
Butterfly Medley Die, HCD1-759
Botanical Wings Cling Stamp Set, HCPC-3652
Everyday Heroes Die, HCD1-761
Regal Borders and Pockets Die, HCD1-779
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Cuttlebug Die Cutting Machine, StazOn Archival Ink (Jet Black), Rangers Distress Ink (Forest Moss, Stormy Sky, Vintage Photo), rhinestones, embossing tool, Stickles (silver)

Watch this video https://www.youtube.com/watch?v=rdsIOVMXjIQ to learn how to create flowers with the Deluxe Flower Shaping Kit. Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: Trim the brown cardstock to 4.5" x 6.5" and die cut the Regal Borders die on the right side. Trim the pattern paper to 4" x 6" and die cut the Regal Border on the right side and ink all the edges. Layer over the brown die cut cardstock and place on a 5" x 7" card base. Stamp and add color using the Stormy Sky distress ink on the centers of the flowers from the Vintage Morning Background PreCut Set. Die cut and assemble the flowers. Add a rhinestone in each center, silver stickles on the edges and set aside to dry. Stamp the vine from the Blushing Rose Stem Cling Stamp Set on white cardstock and add color using the Forest Moss distress ink. Add to top left side of the card along with the leaves from the Blushing Rose Stem Cling Stamp Set. Stamp the butterfly from the Botanical Wings Cling Stamp Set on purple pattern paper and die cut with it's coordinating die. From the same pattern paper, die cut the the pennant from the Everyday Heroes Die and stamp the Happy Anniversary sentiment from the Encourage You Cling Stamp Set off-centered. Add butterfly to the flower cluster and the sentiment to the bottom right side of the card.

Created by: Amarilys Doria

Print Project

Yellow Roses Thoughts And Prayers

Yellow Roses Thoughts And Prayers
Products Used
Designer Dries Clear Adhesive, 159723
ColorBox Fluid Chalk Ink Pad - Dark Brown, 71035
Crystal Ultrafine Transparent Glitter, 85-glitter
Deluxe Flower Shaping Kit, HCST1-401
Regal Borders and Pockets Die, HCD1-779
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Blushing Rose Swirls Die, HCD1-7114
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Fossilised Amber Distress Ink; Peeled Paint Distress Ink; Tahiti Chalk Ink; Clear glass beads, glue gloss pen, Neenah white cardstock, foam adhesive

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection. Watch this video for tips on using decorative border dies https://youtu.be/Ms-PmK7svGI.

Instructions: Card base is 6" x 12" folded in half. Cut Regal borders die on paper in collection that will coordinate with 6" x 6" panel. Stamp and cut Rose Swirl die out three times on white card, colour with peeled paint and use as background for flowers, allowing to stand out among flowers. Stamp and cut 4 sets of classic rose on white card, colour with fossilised amber distress ink. Make 2 roses; layer rest of flowers and leave some smaller flowers to set glass beads. Colour five of the smaller flowers with Tahiti to offset all that gorgeous yellow. Stamp and cut one of the rose vines on white card with dark brown chalk ink, colour with peeled paint and cut apart to create three smaller vines, use as base for flowers. Assemble flowers, leaves and swirls as you like. Search for sentiment in collection, lightly ink with distress ink and add as pictured.

Created by: Karan Gerber

Print Project

Yellow Rose Medieval Chalice

Yellow Rose Medieval Chalice
Products Used
Designer Dries Clear Adhesive, 159723
Luggage and Tags Die, HCD1-745
Spellbinders Tool N' One, 359848
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Italiana Grape Clusters Cling Stamp Set, HCPC-3697
Italiana Grapevines Die, HCD1-772
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Cut File, Black Card Stock, White Card Stock, Velum, Versamark, Aged Silver Embossing Enamel, Metallic Gold Embossing Powder, Black Ink, Distressed Markers (Forrest Moss and Fossilized Amber), Micro Beads Bronze, Distressed Ink (Forrest Moss and Fossilized Amber), Gold Stickles and die cutting machine

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Start by cutting and assembling the Chalice found here (https://www.snapdragonsnippets.com/store/product/896) according to directions out of Black card stock with the top portion of the Chalice cut from Velum instead of paper. The Chalice is covered with panels cut from the Blushing Rose Paper Collection for that perfect extra touch. The Blushing Rose Stem Cling Stamp Set was stamped 6 times on White Card stock with Versamark and heat embossed with Aged Silver Embossing Enamel and cut with the matching die. After they were die cut they were colored using Distressed Markers and finally accented with Bronze Micro Beads. The Rose Arbor was stamped 2 times on White Card stock with Versamark and heat embossed with Metallic Gold Embossing Powder and cut with the matching die and colored with Distressed Markers before being accented with Bronze Micro Beads. The Classic Rose was stamped on White Card stock with Versamark and heat embossed with Metallic Gold Embossing Powder and cut with the matching die and colored with Fossilized Amber Distressed Ink before shaping the flowers with the Deluxe Flower Shaping Kit. The leaves were stamped on White Card stock with Black Ink and cut with the matching die and distressed with Forrest Moss Distressed Ink before shaping with the Deluxe Flower Shaping Kit. The Italiana Grape Clusters Cling Stamp Set was stamped two times on White Card stock with Versamark, heat embossed with Metallic Gold Embossing Powder, cut with the matching die and distressed with Forest Moss and Fossilized Amber Distressed Inks before shaping with the Deluxe Flower Shaping Kit and attaching as shown. Once attached they were accented with Gold Stickles for a little extra sparkle.


Print Project

Yellow Rose Swirl Get Well Wishes

Yellow Rose Swirl Get Well Wishes
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Scor-Pal Measuring & Scoring Board, 173842
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Blushing Rose Swirls Die, HCD1-7114
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Cardstock: 120 lb. white, green, yellow, paper trimmer, embossing/die machine, Misti Stamping Pad, double sided tape, Wink of Stella - Clear, Copic Alcohol Ink Markers: Y000, Y00, Y02, YR 24, G40, G43, YG63, G28

Instructions: Create a 5 1/2" x 5 1/2" top fold card base. Cut the base layer from green card-stock at 5 1/4" x 5 1/4". Cut yellow card-stock at 5" x 5". Select the designer paper from the Blushing Rose paper Collection as shown in the picture. Adhere the layers as shown. I repeated the process for the inside of the card. This is an optional step.

The Blushing Rose Swirl was stamped on X-Press It. You can use any Copic compatible paper if you are using alcohol ink markers or paper for Colored Pencils if that is your ink of choice. The image was colored with the following Copic Markers - Y000, Y00, Y02, YR 24, G40, G43, YG63, G28.

The image was die cut with the Blushing Rose Swirls Die. I also cut the image twice using green card-stock. The solid green image was adhered to the card. The second green image was adhered to the back of the colored Rose Swirl. This adds extra strength for the "double-cut" technique. The image was posed up with dimensional foam dots. The dark green under the image not only adds dimension but it adds a shadow.

For embellishment, Wink of Stella was applied to the green leaves and rim of the roses. The "Get Well Wishes" sentiment was cut from the Blushing Rose Paper Collection.

Created by: Marie Gamber

Print Project

Blushing Rose Background Banner

Blushing Rose Background Banner
Products Used
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Paper Collection, HCDP1-270
Blushing Rose Background Cling Stamp Set, HCPC-3757

Instructions

Other Products: Cardstock- (cream and white), Ink- CTMH (Chocolate), Fantastia Watercolor Pencils (9, 13, 29, 39), Wink of Stella (Clear), Tombow Adhesives (Mono Aqua, Mono Permanent Runner), 3D Foam Tape, May Arts Ribbon (Lace, Green Ruffle, Mustard Silk), Hot Glue

Instructions: I started by stamping the background image twice on white cardstock, and twice on cream cardstock using a chocolate brown ink. Choose one of the white cardstock images as your full background and cut around the image creating a piece that is 4" x 6.5" and flag the bottom. I used my watercolour pencils to colour the base image. I added colour to all of the flowers, leaves and stems, as well as the large words.

On the second stamped image on white cardstock, I added color to just the roses, and leaves. Then I fussy cut around all of the roses and the larger leaves. Shape these small pieces and then adhere each to the full image using 3D foam tape. I added clear Wink of Stella to all of the roses.

From the cream cardstock images: You will cut out the large square banner and a little bit above it, as well as the rolled scroll from the banner just above it. Then the lower scroll piece from the top banner. From the other stamped image on cream cardstock, I cut out both of the full banners with words. I added color to the edges of these 2 using my colored pencils.

Adhere the square banner at the bottom first using 3D foam tape, then the next banner on top of that using slightly thicker 3D foam tape. Then I added the little scroll piece from that same banner, again using foam tape. This dimension gives the whole scroll a 3D more real look. Do the same for the top banner, creating dimension between layers.

Mat your background in the pink patterned paper from the Classic Rose collection. Then mat that in the kraft colored chipboard. I adhered these layers together using 3D foam tape. I used hot glue to attach my wooden skewer to the top of my banner. Then I simply added long lengths of pretty coordinating ribbon, one of which creates the hanger.

Created by: Tracy McLennon

Print Project

Red Blushing Rose Panel

Red Blushing Rose Panel
Products Used
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Clear Cardstock 8.5 x 11, GBCC811
Vellum Paper - 10 Sheets, 242174
Dove Blender Kit, 241159
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Swirls Die, HCD1-7114

Instructions

Other Products: Zig Brush Pens: Maroon, light pink, light green and dark green, Distress inks: Pumice Stone, Espresso and Peeled Paint

Watch this video https://www.youtube.com/watch?v=rdsIOVMXjIQ to learn how to create flowers with the Deluxe Flower Shaping Kit.

Instructions: Make the card base by cutting a white card stock 7" x 10" and score at 5" on the long side and fold. Cut a mat layer from white cardstock measuring 4" x 6". Swipe Distress inks on a craft mat and spray water on top. Swipe the mat layer on this ink crush into a loose ball when still wet. Open the layer and distress a little with Espresso ink to highlight the cracks. Let it dry. Adhere on the card front with 3D foam tape. Cut three strips of white cardstock measuring 1" by 6". Roughly tear the bottom edge. Score random lines on the score board on these strips to give a woodgrain effect. Distress the sides and top with Espresso ink. Adhere the three strips on the mat layer with 3D foam tape.

Stamp the 4 images from the Blushing Rose Stamp set and cut with coordinating die. Colour with Zig markers and shape and emboss on the flower shaping tool kit. Arrange on the card with clear adhesive and 3D foam tape. Stamp the sentiment image on vellum and adhere as shown. The finished card measures 7" x 5".

Created by: Anita Kejriwal

Print Project

Lavender Rose Dream

Lavender Rose Dream
Products Used
Stamp Mat Pad, D110305
Funnel Tray, 31510
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
ColorBox Fluid Chalk Ink Pad - Dark Brown, 71035
ColorBox Fluid Chalk Ink Pad - Guacamole, 71058
Baby's Breath Ultrafine Transparent Glitter, 101
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Glue Tip Pins, PIN6
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Lace, Bling form Want to Scrap, Creative Embellishment Chipboard, Hemp Cord, Foam Sheet

Watch this video https://youtu.be/Z8P070kC3oo to learn how to create dimensional roses with the Classic Rose Collection.

Instructions: Prepare a card base at 5" x 7". Cut a piece from the Blushing Rose paper Collection at 4 7/8" x 6 7/8", layer it on a piece of the foam sheet. Cut another small piece 2 1/2" x 6", add foam sheet and adhere off to the left side of the card as shown. Top that one with another piece 4" x 5" and add foam only to the right side and add lace to the bottom wrapping around all layers, adhere to card base. Add the Dream chipboard on top of the lace along with the bling. Stamp the leaves and flowers on white card stock, color with the Lulu Lavender ink and Bamboo Leaves, cut out, shape and set aside. Make a bow from the hemp cord and adhere to the card. Add the flowers and leaves. To finish add glitter to leaves and flowers.

Created by: Olga Jewell

Print Project

White Rose Swirl

White Rose Swirl
Products Used
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Deluxe Flower Shaping Kit, HCST1-401
Go Man Go Prills, ANC818
Blushing Rose Swirls Cling Stamp Set, HCPC-3756
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Swirls Die, HCD1-7114
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Yellow Card Stock, Cryogen Metallic Card Stock, ATG, Copic Markers: V22, YR68, G46, BG93, detail scissors

Watch this video https://www.youtube.com/watch?v=rdsIOVMXjIQ to learn how to create flowers with the Deluxe Flower Shaping Kit.

Instructions: Begin with a yellow card stock base, 5" x 7". Find the yellow designer paper page with the You are Courageous banner, trim to 4 3/4" x 6 3/4" and then fussy cut along the green flourish. Adhere to the card front. Stamp the wild rose swirl stamp twice with Memento Tuxedo black ink onto Cryogen metallic card stock and die cut with the coordinating die. Add YR68 to the flower centers and V22 to the base of the petals. Use G46 to edge the leaves and on the stems, then add BG93 to the leaves. Using the Deluxe Flower Shaping Kit, emboss the back side of the leaves and flowers then emboss the stems and flower centers on the front. This gives them some dimension. Refer to the photo to see how the die cut is placed on the card. Snip the one flower and leaves off and move above the larger flower so it fits the card better; adhere with Designer Dries Clear Adhesive.

For the inside of the card, add yellow patterned paper then trim out the small banner panel. Stamp the sentiment with Memento Tuxedo Black ink. Mat the panel with yellow card stock and adhere to the left of the card inside. Add your second wild rose die cut, again trimming off one flower and stem as shown in the photo.

Add Go Man Go Prills to the flower centers with Designer Dries Clear Adhesive.

Created by: Sandy Hulsart

Print Project

Blushing Rose Background

Blushing Rose Background
Products Used
Stamp Mat Pad, D110305
Designer Dries Clear Adhesive, 159723
Scor-Pal Measuring & Scoring Board, 173842
Blushing Rose Background Cling Stamp Set, HCPC-3757
Blushing Rose Swirls Die, HCD1-7114
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Paper: Neenah Solar White, Recollections White, The Paper Studio Green Jewel; Inks: VersaFine Onyx Black, VersaMagic Thatched Straw; Accessories: mineral spirits, paper stumps, Prismacolor Pencils: Lilac, Parma Violet, Dioxazine Purple Hue, Prussian Green, Dark Green, Jasmine, Yellow Ochre, adhesive pearls, Scotch Mounting Tape

Instructions: Card measures 4 1/4" x 5 1/2". Cut white cardstock 4 1/4" x 11", score at 5 1/2" and fold to make card base. Cut yellow designer paper from the Blushing Rose Paper Collection 4 1/4" x 5 1/2", ink edges with Thatched Straw Ink and glue to card base.

Stamp Blushing Rose Background image on Solar White with Onyx Black Ink. Color with pencils and minerals spirits using paper stumps. Trim image down to 3 7/8" x 5 1/8". Cut Green Jewel cardstock to 4 1/16" x 5 5/16" and adhere behind image. Add to card base with Scotch Mounting Tape.

Stamp "Beautiful" banner portion of image on Solar White with Onyx Black Ink. Color banner only with pencils and mineral spirits using paper stumps. Cut with matching die from the Blushing Rose Swirls Die and add to background image using Scotch Mounting Tape. Add adhesive pearls.

Created by: Kathleen Roney

Print Project

Yellow Rose Friendship Bouquet

Yellow Rose Friendship Bouquet
Products Used
Deluxe Flower Shaping Kit, HCST1-401
Classic Rose Vines Cling Stamp Set, HCPC-3753
Classic Rose Vines Die, HCD1-7111
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Stem Die, HCD1-7113
Blushing Rose Paper Collection, HCDP1-271

Instructions

Other Products: Creative Embellishments Honeycomb, Color Box Chive, Distressed ink pad Mustard Seed, Grand Squares Spellbinder, White card and Green card, Silver embossing powder, VersaMark Ink, Versafine black, ribbon

Watch this video https://www.youtube.com/watch?v=rdsIOVMXjIQ to learn how to create flowers with the Deluxe Flower Shaping Kit.

Instructions: Cut paper pad 7" by 7" then stamp with a sentiment. Cut a frame from the white card using the Grand squares from Spellbinders, adhere the honeycomb over the top of paper, then adhere the frame. Cut green card 7 1/4" by 7 1/4" then white card 7 1/2" by 7 1/2" mount all up. Stamp the blushing rose stem on to white paper with vera mark and heat emboss with silver. When cool color in with mustard seed, then cut out with matching die. Stamp the vines with ink and color in chive and cut out with matching die. Mold the stem flowers with the shaping kit, arrange in the frame and add the Vine leaves. Add small bow.

Created by: Martine Smith

Print Project

Yellow Rose Stems Z Slider Card

Yellow Rose Stems Z Slider Card
Products Used
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Embossing Powder - Gold, 359760
Blushing Rose Stem Cling Stamp Set, HCPC-3755
Encourage You Cling Stamp Set, HCPC-3758
Blushing Rose Stem Die, HCD1-7113

Instructions

Other Products: Want-2-Scrap Self adhesive bling half pearls; INKS: Peeled Paint Distress, Forest moss; PAPERS: Aquarelle paper, Cardstock: Winter white, Green; Other: Heat gun, Versa-mark, Water coloring brush, Fussy cutting scissors, Diamond stickles, Foam tape, Spellbinders embossing folder- Splattered circles, Chameleon pens tint of color Olive green OL3

Watch this video https://www.youtube.com/watch?v=rdsIOVMXjIQ to learn how to create flowers with the Deluxe Flower Shaping Kit.

Instructions: This is basic instructions on how to cut a Z slider card that measures when finished 15 cm x 13.5 cm. Using a winter white base card stock cut for the card base, 27 cm x 13.5 cm. Make folds at 6 cm and 12 cm across the 27 cm side. Fold these creases to form hill and valley folds. Once the card base is folded, the measurements to be further used will be, 15 cm x 13.5 cm (background), 6 cm x 13.5 cm. (card front foot). Further, cut from the base card stock, 13 cm x 10 cm (card front) and 11.5 cm x 4.5 cm (card front slide).

Cut all the contrasting matting and design papers 2mm smaller each side for each layer used. Once the card background and the slider card piece is completed with the matting, the slider can be adhered to the top center of the card background. (NOTE: When the card front is being put together, leave the top of the card between the base and the matting layers open. This is so you can slide the slider between the layers. This part of the card holds it all upright and works as a stand.) Adhere the card front to the card foot, making sure you have enough room for the slider to slide into the card front opening. To make the Z card base for this card cut two mattings. The first green and the second white, this will be embossed with the embossing folder. Adhere the matting layers to the card base. Remembering to leave the top open for the slider.

Taking the aquarelle paper, stamp twice both sizes of the rose stems from the Blushing Rose Stem stamp set. Color, using the distress inks, then die cut the stamped shapes. Stamp the sentiment, then cut into a banner for across the card front. Bring the olive color to the half pearls with the Chameleon pen. Apply to the banner ends. Adhere the rose stems and banner in place using foam tape/squares to adhere the front roses to give depth to the embellishment. To finish the card, apply stickles to the stems and leaf centers.

Created by: Susan Smit

Print Project

Comments



DONNA WHITTEN
Beautiful projects! Love them all! Thanks for the instructions.
Wednesday 19th of October 2016 10:50 AM
MARILYN
Beautiful and inspiring
Wednesday 19th of October 2016 11:34 AM
DIANA E. BISHOP
EVERYONE OF THESE CARDS ARE ABSOLUTELY BEAUTIFUL ! ! !
Wednesday 19th of October 2016 12:42 PM
SUSAN FREEMAN
All of these designs are breathtaking. The colors used plus the design elements chosen are just gorgeous. Thank you for sharing and a big sigh of envy for all of the artists. Perhaps one day I will achieve this level myself.
Wednesday 19th of October 2016 12:51 PM
MARTIE ROLLIN
I'm one of your blog followers that loves working with roses! Your petal layers make it so easy to create gorgeous flowers that amaze both me and my friends/family! Loved seeing all these delightful projects. thanks!
Wednesday 19th of October 2016 05:01 PM
DOROTHY MELTON
Love these projects with one exception. Some of them would cost a fortune to mail.
Thursday 20th of October 2016 03:31 PM
ANNA KAY
Great ideas for those times when my mojo gets stuck
Tuesday 15th of November 2016 07:28 AM