Cure Cares with New Fuchsia Card Ideas
Hello Everyone!
How’s your week going so far? We hope it is going well:) If you need a pick me up and are experiencing the cares of life, cure everyday cares and make a card they love with these new, inspiring fuchsia card ideas.
On the blog today:
-
Step by step instructions with each handcrafted project...
-
Sneak peek of the Blazing Poppy Collection releasing in 1 week on June 10th...
-
A video tutorial on how to create fuchsias the EZ way...
-
25+ NEW card ideas they’ll love getting and you’ll love making...
- Versatile ways to use the best selling Cascading Fuchsia stamps and dies
Blazing Poppy Collection Preview
You can see a preview of the collection here: http://hcgo.co/BlazingPoppy
~Releasing on June 10th, 2015
How to create fuchsias the EZ way...
Creative Inspiration of the Week
Fuchsia Side Fold Card
Decorative Oval Die, HCD1-762
Cascading Fuchsia Die, HCD1-763
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Classic Leaf Die, HCD1-736
Open Leaf Cling Stamp Set, HCPC-3545
Deluxe Flower Shaping Kit, HCST1-401
ColorBox Fluid Chalk Ink Pad - Guacamole, 71058
ColorBox Fluid Chalk Ink Pad - Dark Peony, 71032
Memento Dye Ink Pad - Cantaloupe, TSMP103
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Other Products: White card stock.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: Cut a 4.25" x 11" white card base and score each side at 2.75". Cut out 1 decorative oval from white cardstock and cut it in half. When tracing the oval piece on the outside flaps, do the trace on the "inside of the flaps. Then lay a green piece of the card stock "on top" of the "outside flaps. Then cut both the card base Flap and green card stock (which should be glued to the card base) together and then lay the "oval piece on top" Pick a printed green panel from the cascading fuchsia paper and layer it on the inside and on the card flaps. Glue the oval die on top of the flaps. The scallop along the top and bottom was a lace border piece cut from the paper collection.
Stamp 3 medium sized fuchsias with black ink on white cardstock and cut it out with the coordinating die. Color the fuchsias with dark peony chalk ink, stamens with cantaloup and the leaves with guacamole. Assemble and shape the flowers and leaves as shown in this video. Layer the leaves and flowers as pictured. Stamp the sentiment from the Heartfelt Sentiments set and cut it out with the arrow in the Everyday Heroes Die. I cut the butterfly from the paper collection. Assemble everything as pictured and add crystal glitter with the dries clear glue and the fine metal tip. Add the sentiment from the paper collection if desired.
Celebrating Fuchsia Cluster
Cascading Fuchsia Die, HCD1-763
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Classic Leaf Cling Stamp Set, HCPC-3546
Classic Leaf Die, HCD1-736
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Other Products: Kindyglitz: Crystalina, Hot pink, Hemptique twine, Copics: BG93, G99, YG11, RV10, V04, R20, Ranger distress ink: Victorian Velvet.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: Cut a square panel from patterned paper and stamp the Fuchsia Clusters image to the centre. Colour with Copics. Adhere to the inside of a 6" card base. Cut a second square panel from patterned paper. Adhere to the front of the card, then use a craft knife to remove the inner square to create a frame. On the bottom right corner adhere a sentiment tag with a twine bow tucked under the right hand side. Stamp and die cut a series of leaves. Shape and adhere to the top left and right hand side of the card. Stamp and die cut some fuchsia petals. Ink the edges and assemble flowers. Adhere over the top of the leaves. Apply glitter to the ends of the stamens and to the flowers of the stamped image.
Pink Cascading Fuchsias
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Cascading Fuchsia Die, HCD1-763
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Decorative Oval Die, HCD1-762
Everyday Heroes Die, HCD1-761
Cut Mat Create 2A Die, HCD2-751
Stamp Mat Pad, D110305
Deluxe Flower Shaping Kit, HCST1-401
Zip Dry Paper Glue, 273900
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Other Products: CTMH Vineyard Berry Ink, Foam Tape, May Arts Ribbon, green, white and pink bazzill card stock, sewing machine.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: Cut out 6" x 6" burgundy decorative paper that will be the base. Next cut out decorative paper 5 3/4" x 5 3/4". Glue down on the base and then stitch around with the sewing machine. Cut out the decorative oval using the pink card stock and glue down in the middle of the card using the dries clear glue. Next cut out strip of green decorative border and then back it on green cardstock leaving a 1/8" border. Attach over the top of the middle with foam tape. Cut out the decorative panel from pink paper from the Fuchsia collection and ink the edges with the vineyard berry. Glue down in the middle of the card. Stamp the sentiment on the same paper using the vineyard berry ink and then cut out with coordinating die. Make a double loop ribbon and run through the sentiment leaving the tails hanging. Attach to the middle of the card. Next cut out the leaf flourishes from green designer paper. Cup each of the leaves with the flower tools. Next stamp five of the medium fuchsia stamp on the pink card stock and cut out with coordinating die. Ink the main petals with the vineyard berry ink, dark in the middle and then shade lighter towards the edges. Use the flower shaping kit and cup each of the petal. On the top petals curl outward and upward. Roll the stamens and glue to the inside centers. Stack and glue all the petals together. Glue the buds onto the cupped leaves and then attach the two leaf flourishes as shown. Finish the card by attaching to a 6" x 6" white card stock base.
Cascading Fuchsia Birdhouse
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Die, HCD1-763
Decorative Oval Die, HCD1-762
Classic Leaf Die, HCD1-736
Open Leaf Cling Stamp Set, HCPC-3545
Deluxe Flower Shaping Kit, HCST1-401
Other Products: Mauve mirror paper, burgundy & mauve cardstock, Small MDF birdhouse from Michaels, rhinestones, rhinestone string, mushroom bird, magenta Stickles, sparkle Mod-Podge, evergreen bough Distress ink, 1" circle punch, Spellbinder classic scalloped circles, Crop-a-dile, & glue.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: For a larger project image click here. Measure a side of birdhouse and cut four pieces of designer paper. I cut three sides of same paper and one different print for front of house. Glue three sides to birdhouse and press front side with finger to make marks where perch and hole are. I set Crop-a-Dile to 3/16" and punched small hole and then punch large hole with 1" punch. Glue this piece to front of birdhouse. Punch a 1" hole in a piece of mirror cardstock then line up smallest scalloped circle die and cut out with die cutting machine. Glue this piece around hole on front of birdhouse. Measure width of birdhouse base and then cut four 3/4" strips and glue to base, wrapping ends under base and gluing down. Glue a strip of rhinestone string around area where sides and base meet. Lay birdhouse on designer paper and trace around triangle top. Cut four pieces. Glue these to birdhouse top. Glue rhinestone string around very top, just under cord. Cut one Decorative Oval from designer paper. Clip center of oval and slip down over cord. Glue in place in bottom center of each triangle roof piece. Glue a rhinestone over each floret in oval.
Cut enough petals to form six Fuchsia flowers from burgundy cardstock. Cut six sets of stamens and calyx from mauve cardstock, add magenta glitter to stamen tips and set aside to dry. Using the flower shaping kit, mold and assemble the flowers. You may make more flowers if you wish to trail down the back side of birdhouse roof. Stamp six sets of leaves onto designer green paper with the Distress ink and cut out with matching die. Sponge edges with Distress ink and then coat with sparkle Mod-Podge and set aside to dry. Snip two small pieces of leaves and glue around perch, then glue bird to perch. Arrange and glue in place leaves and Fuchsia flowers on the roof to complete your project.
Fuchsia Spray
Fuchsia Spray Cling Stamp Set, HCPC-3670
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Everyday Hero Newsprint Cling Stamp Set, HCPC-3665
Cascading Fuchsia Paper Collection, HCDP1-254
Everyday Heroes Paper Collection, HCDP1-253
Decorative Oval Die, HCD1-762
Everyday Heroes Die, HCD1-761
Walnut Brown Metallic 3D Stamp Paint, 315941
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Memento Dye Ink Pad - Rose Bud, TSMP400
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Other Products: Spellbinders Ovals; Tim Holtz Distress Ink - Mowed Lawn; Copics RV52, RV55, RV63, RV66, RV69, G40, G43, G46, BG0000, Want2Scrap: Baby Bling - White Pearls, 72 Count - White Pearls, 72 Count - Pink Rhinestones, 72 Count - Light Green Rhinestones; DecoArt Paper Effect - Amethyst Pearl.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: Create a 5" x 7" card base and then adhere a 5" x 7" card front from the Cascading Fuchsia Paper Collection. Then using the corresponding Spellbinders Oval, die cut out the oval, cutting through both the card front and card base. Next using brown paper from the Everyday Heroes Paper Collection cut out the Decorative Oval Die and then add Walnut Brown 3D Stamp Paint with a sponge. Adhere to card front centering over oval cut out. Add White Baby Bling Pearls to the Decorative Oval die cut as shown and add four large White Pearls to each of the corners of the card front as shown.
Then on Cryogen White Paper with Tuxedo Black Memento Ink stamp the Fuchsia Spray image twice and color with Copics. Detail cut out one of the images completely and add to card front. Take the second image and cut out flowers and leaves as desired and add to the colored image for more dimension. With Dries Clear Adhesive add Crystal Glitter to the leaves and flowers and add Amethyst Pearl Paper Effects to the ends of each flower. On Cascading Fuchsia Paper with Rose Bud Memento Ink stamp the "Best Wishes" sentiment circle from the Heartfelt Sentiments Set and die cut with the Everyday Heroes Die. On Cascading Fuchsia Paper with Mowed Lawn Distress Ink stamp the arrow from the Everyday Hero Newsprint Set and with Espresso Truffle Memento Ink stamp the "Have a wonderful day" sentiment from the Heartfelt Sentiments Set. Die cut with coordinating Everyday Heroes Die. Assemble and add to card front with pop dots as shown. Add pink and light green rhinestones to end of sentiment arrow.
Fuchsia Gift Card Set
Cascading Fuchsia Paper Collection, HCDP1-254
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Vining Fuchsia Cling Stamp Set, HCPC-3669
Fuchsia Bouquet Cling Stamp Set, HCPC-3672
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Fuchsia Spray Cling Stamp Set, HCPC-3670
Cut Mat Create 1B Die, HCD2-750
Cut Mat Create 2B Die, HCD2-752
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Other Products: Canson water Colour Paper, Staedtler Water Colour Pencils (12pack), Distress Markers in Peeled Paint; Antique Linen; Concord; diamond stickles; white bazzill cardstock; Want2Scrap white pearls; Floral Oval Die; Swirl Bliss Die; Labels 47 Die; May Arts Gold Thread; Snug Bug Seam Binding; pearl sprays, Black archival In,. Grand Ovals, Gold Glimmer Mist.
Instructions: Look for three card panels in collection, 2- 5" x 7"; one 6" x 6"; Cut out coordinating mats (2 per each card) from papers in collection to fit card bases. Pop with foam adhesive. Cut floral oval in a light purple paper, and cut the Labels 47 in white card cutting down to the criss cross pattern and layering on paper as shown. Cut out Swirl Bliss onto a light purple paper in collection twice. Using peeled paint, stamp Sentiment "Get Well Soon" and double point flag the edges as shown. Stamp all three images onto canson water colour paper with Black Archival Ink. Colour the Vining image with Peeled Paint and Concord Distress Markers and use the Staedtler pencils too. Antique edges of the Vining Image with Antique Linen. Cut to size and attach Swirl Bliss die cut to each end and attach to card base. Stamp the Spray onto canson water colour paper and colour only the larger Fuchsias and cut these out to layer on top of the Vining Image. Colour the Cluster Fuchsia image with the pencils and use the Grand oval to cut out, adhere to floral oval die and adhere to card base. Colour the Bouquet image with the water colour pencils and use the Cut Mat Create to cut out and create a mat. Add diamond stickles for detail. When all cards are dry, lightly mist with Gold Glimmer Mist.
Cherish Fuchsia Bouquet
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Leafy Branch Cling Stamp Set, HCPC-3645
Fuchsia Bouquet Cling Stamp Set, HCPC-3672
Cascading Fuchsia Paper Collection, HCDP1-254
Leafy Branch Die, HCD1-757
Cascading Fuchsia Die, HCD1-763
Luggage and Tags Die, HCD1-745
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Metal Tip for Adhesive Bottles, 352854
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Other Products: Spellbinders Labels 39 and Labels 39 Decorative Elements; Curious Iridescent - Cryogen White; Copics RV63, RV66, RV69, V12, V15, V17, G40, G43, G46: May Arts Ribbon; Want2Scrap 72 Count - Silver Rhinestones; DecoArt Paper Effect - Amethyst Pearl; Want2Scrap Decorative Pin Jewels - Apple Green; Maya Road Trinket Pins - Pink Hearts.
Instructions: Create a 6" x 6" card base. Wrap a piece of white ribbon around the center of a 6" x 6" card front from the Cascading Fuchsia Paper Collection before adhering it to the card base. Then with Memento Ink on Cryogen White Paper that has been die cut with Spellbinders Labels 39 stamp the image from the Fuchsia Clusters Set and color with Copics. Matte colored image on Cascading Fuchsia paper that has been die cut with Labels 39 Decorative Elements Die and adhere to card front with pop dots. On Cryogen White Paper with Memento Ink stamp the single Fuchsia from the Fuchsia Bouquet Set, color with Copics and detail cut out. Add cut out Fuchsia to colored image on empty spot on vine. Next on Cryogen White Paper stamp several leaves using the Leafy Branch Set, color them with Copics and die cut them with the coordinating die from the Leafy Branch Die set. Also with Tuxedo Black Memento Ink on Cryogen White Paper stamp several sizes of the Cascading Fuchsias Set. Color the tops of the Fuchsias with Copics and die cut with the coordinating dies from the Cascading Fuchsia Die set. With the Deluxe Flower Shaping Kit shape the leaves and the tops of the Fuchsias and then with Dries Clear Adhesive add to the colored image. With the fine metal tip and Dries Clear Adhesive add Crystal Glitter to the Fuchsias and Leaves and add Amethyst Pearl Paper Effect to the ends of each flower. Make a bow and add to ribbon and then insert decorative pins. Using the Luggage and Tags die, die cut the "Cherish" sentiment from the Cascading Fuchsia collection, add to card front with a pop dot and add a Silver Rhinestone to the hole in the tag.
Fuchsia Pocket Letter
Other Products: Baseball Card pocket page, Foam dots, Scripted black washi tape, Spellbinders Flourish Die.
Instructions: As you can see I just got cutouts of the journaling spots from the collection and used some flourishes. I also fussy-cut some of the images like Butterfly, Banners, flower and used them on here. Also I have inserted some sequins and glittered trim to give some sparkly touch.
I have altered the regular envelope using one of the 12" X 12" papers from the collection and used one of the banner fussy cut and used as a belly band for the envelope. I am so in to the pocket letters these days and I am sure you too ;-)
Red Fuchsia Spray
Cascading Fuchsia Paper Collection, HCDP1-254
Fuchsia Spray Cling Stamp Set, HCPC-3670
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Designer Dries Clear Adhesive, 159723
Other Products: Spellbinders Label 47 Decorative Elements; Spectrum Noir PPI, PP2, PP3, DG1, DG2, DG3, Blender; Copic C0; White Cardstock; Papertrey Ink Scarlet Jewel; Queen & Co. Bubbles.
Instructions: Card size is 5" x 7". Start with a blank card base, cut a 5" x 7" piece of Scarlet Jewel cardstock, glue cardstock to card base, cut a 4 7/8" x 6 7/8" piece of Cascading Fuchsia paper, and glue to card base. Die cut white cardstock using Label 47 Decorative Elements #3 die, and glue die cut to card. Cut a 3 3/4" x 4 3/8" piece of Scarlet Jewel cardstock, and glue to card. Stamp Fuchsia Spray image onto white cardstock using Tuxedo Black ink, color image with Spectrum Noir and Copic markers, trim image to 3 5/8" x 4 1/2", and glue image to card. Cut a sentiment strip from Cascading Fuchsia paper, trim strip to 4 7/8", cut a 4 7/8" x 1/2" piece of Scarlet Jewel cardstock, glue sentiment to Scarlet Jewel cardstock, and glue to card. Glue bubbles to card.
Believe Door Hanger
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Classic Leaf Cling Stamp Set, HCPC-3546
Cascading Fuchsia Die, HCD1-763
Decorative Oval Die, HCD1-762
Classic Leaf Die, HCD1-736
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Other Products: Green & kraft cardstock, Stick-It Adhesive sheet, cream pearls, burgundy ribbon, Metal embellishments, door hanger SVG cut file & Silhouette digital cutter, Victorian Velvet Distress Ink Pad, sponge, Pear Pizazz ink pad, cream twine, 3d foam squares, Clear Wink of Stella pen.
Instructions: Finished project measures 9 1/4" x 3 1/2". Using a digital cutter, cut 2 door hangers from light weight chipboard. Adhere the two chipboard door hangers together. Cut out a piece of patterned paper from the collection and adhere to front of door hanger. Stamp Cascading Fuchsia stamp set onto patterned paper using Espresso Truffle Memento Ink. You will need 3 large, 1 medium and 1 small set of flowers. Use the matching die to die cut the flowers. You will only need the flower petals to create each flower. Using the flower shaping kit, shape petals and adhere two flowers together. Stamp the Classic Leaf stamp set onto green cardstock using green ink. Die cut with matching leaf die, sponge edges and shape leaves using flower shaping kit. Apply adhesive sheet to back of kraft cardstock and die cut with the Decorative oval die. Adhere die to door hanger as shown, cutting off the excess. Adhere leaves into place. Make a bow from the twine and adhere into place then adhere flowers into place as shown. Add the metal embellishments and the sentiment. Use the wink of stella pen on the petals of the flowers. Tie satin ribbon into a bow at top of hanger to complete project.
Fuchsia Celebrating You Tag
Botanical Rose Cling Stamp Set, HCPC-3651
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Luggage and Tags Die, HCD1-745
Botanical Wings Die, HCD1-758
Decorative Oval Die, HCD1-762
Cascading Fuchsia Die, HCD1-763
Cascading Fuchsia Paper Collection, HCDP1-254
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Spellbinders Tool N' One, 359848
Other Products: White Card Stock, Standard Circles Small, Tear Drop Circles, Distressed Inks (Victorian Velvet and Peeled Paint), Ribbon and Bling from my stash and die cutting machine.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower.
Instructions: Start by creating your tag out of White cardstock. My tag is 8 1/2" x 4". Next create a smaller layer using a piece of designer paper from the Cascading Fuchsia Paper Collection. For a nice layer effect, take the Decorative Oval Die but only cut half of the die! To achieve this effect tape the die to your cardstock with enough paper for the entire die. Now you will need to tape the paper and die to your top plate so that only the portion of the die that you want cut is under the plate. By using tape this will ensure that the dies does not move. Now using the sandwich combination required by your machine, die cut and emboss the die. Only the portion of the die between the plates will be cut. After the cutting is complete, simply trim the extra paper that was not die cut into whatever shape you desire.
I trimmed mine into a 1" wide rectangle.
Finish your tag by adding some lace, sentiments and a few other embellishments such as pretty flat-backed pearls.
Also do not forget to add some of those lovely Cascading Fuchsia flowers!
Fuchsia Cluster Step Card
Cascading Fuchsia Paper Collection, HCDP1-254
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Classic Leaf Cling Stamp Set, HCPC-3546
Classic Leaf Die, HCD1-736
Memento Dye Ink Pad - Cottage Ivy, TSMP701
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Spellbinders Tool N' One, 359848
Other Products: Neenah white cardstock, Distress Inks, water brush, Crystal Stickles, pearls, pearl flourishes, clear embossing powder and glue gun.
Instructions: Create a center step card base as shown in this tutorial from Splitcoaststampers. Using a panel from the Cascading Fuchsia Paper Collection add to inside of card. Cut two (2) side strips from Cascading Fuchsia Paper Collection at 7/8" x 4 1/4", adhere to card and add pearl flourishes. Cut front panel, adhere to card and add pearl strip to lower edge. Cut, using Decorative Oval die, from a contrast paper, add pearls to edge and adhere to center panel of card. Stamp image from Fuchsia Clusters and color with Distress Ink and a water brush. Add Crystal Stickles to image, cut with Spellbinders Scalloped Ovals, add pearls to edge and add to card with foam pop ups. Stamp using Classic Leaf stamp onto green cardstock, cut out with coordinating Classic Leaf Die, color and shape using Deluxe Flower Shaping Kit. Add foliage to card front. Cut a tag from Cascading Fuchsia Paper Collection and emboss with clear embossing powder. Make a bracket for your tag using Spellbinders Devine Floral die, attach to tag with glue, add a pearl and add to card using glue gun.
Birthday Fuchsias
Cascading Fuchsia Paper Collection, HCDP1-254
Bella Rose Leaves Cling Stamp Set, HCPC-3390
Bella Rose Die, HCD1-712
Summer Song Cling Stamp Set, HCPC-3615
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Scor-Pal Measuring & Scoring Board, 173842
Other Products: Stampin Up Ink/Markers Glorious Green, and Garden Green, Gold and White, Liquid Pearls, Bling on a Roll.
Instructions: Prepare a card base of 5" x 7" and the cut away 2 1/2" from the front of the card. I used Glorious Green card stock from Stampin Up as my base. Layer paper from the Cascading Fuchsia Paper down the side of the front and inside. Cut one of the card fronts from the Paper collection, mat it on the same color card stock as your card base and adhere to the front of the card. Stamp and cut out the Bella Rose Leaves, Shade, Shape and add to the top of the card. Stamp your sentiment. Locate the Cascading Fuchsia image from the paper collection and fussy cut it out and adhere to the card. On the inside I added another card front to the back side of the one on front. Add Liquid pearls to both the front and inside of the card to finish it.
Swinging Fuchsias
Leafy Branch Cling Stamp Set, HCPC-3645
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Fuchsia Bouquet Cling Stamp Set, HCPC-3672
Timeless Amour Die, HCD1-728
Leafy Branch Die, HCD1-757
Cascading Fuchsia Die, HCD1-763
Cascading Fuchsia Paper Collection, HCDP1-254
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Spellbinders Tool N' One, 359848
Scor-Pal Measuring & Scoring Board, 173842
Memento Dye Ink Pad - Espresso Truffle, TSMP808
Memento Dye Ink Pad - Rose Bud, TSMP400
Memento Dye Ink Pad - Olive Grove, TSMP708
Other Products: White Card Stock, Marvelous Squares, Derwent Watercolor Pencils (Cedar Green, Copper Bench, Imperial Purple and Rose Madder), Crystal Fine Glitter, Shabby Shutters Distressed Ink, Lace, String and Bling from my stash and die cutting machine, Grape Jelly Memento Ink.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower
Instructions: Start by creating your swing card out of White Cardstock and cutting your layer of decorative paper from the Cascading Fuchsia Paper Collection. For a tutorial on how to make a swing card, click here. Stamp your Fuchsia Bouquet Cling Stamp Set and color with water color pencils. Once the image is colored, die cut using the Spellbinders Marvelous Squares. The flowers were stamped with Memento Expresso Truffle and distressed with Memento Grape Jelly and Memento Rose Bud and finally slightly dusted with Crystal Fine Glitter. The leaves were distressed using a combination of Memento Olive Green and Shabby Shutters distressed ink. To attach the fuchsia flowers I hung the flowers with string and wrapped the string around the frame and then hid the string with a layer of decorative paper.
Fuchsia Cluster Tag
Other Products: Mowed Lawn, Picked Raspberry, Seedless Preserve, Salty Ocean & Brushed Corduroy Distress Inks, Black Archival Ink, Ranger Sail Boat Blue & Citrus Alcohol Inks, Koi waterbrush, Ebosser, Martha Stewart scoreboard, white, glossy white & watercolor cardstock, Spellbinders Labels One dies, Spellbinders Decorative Labels One dies, Pearls, Ribbon, Rhinestones & Adhesive.
Instructions: Take a 7" x 3 1/2" white cardstock, cut both the top & bottom edges into semicircles & Ink with Brushed Corduroy Distress Ink. Ink a glossy white cardstock with Ranger Sail Boat Blue & Citrus Alcohol Inks & die cut it with Raindrops on Roses Die. Cut this die cut into half & adhere to the top & bottom of the tag. Die cut white cardstock with largest & second largest Spellbinders Decorative Labels One dies. Ink the largest die cut with Picked Raspberry Distress Ink. Adhere them to the tag with foam tape as shown. Die cut a piece of white cardstock with Spellbinders Labels One die & ink with Brushed Corduroy Distress Ink. Stamp Fuchsia Clusters Cling Stamp Set on watercolor cardstock with Black Archival Ink, color with distress inks & Koi waterbrush & fussy cut it to mat on the die cut. Adhere both to the tag as shown with foam tape. Add some pearls, rhinestones & a pink ribbon bow to finish.
Lilac Fuchsia Clusters
Cascading Fuchsia Paper Collection, HCDP1-254
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Fuchsia Spray Cling Stamp Set, HCPC-3670
Decorative Oval Die, HCD1-762
Cut Mat Create 1B Die, HCD2-750
Everyday Heroes Die, HCD1-761
Memento Dye Ink Pad - Lilac Posies, TSMP501
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Spellbinders Tool N' One, 359848
Stamp Mat Pad, D110305
5pc. Acrylic Block Set, SUAH05
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Double Dots 100pc. -3D Foam Circles, DDOTS
Other Products: Cardstock - purple - Pink - white, Copic Markers BV0000 - 01 - 02 - 04, YG 25 - 21, clear rhinestones, Spellbinders Label One.
Instructions: Take paper from the Cascading Fuchsia Paper Collection, and make a 6" by 6" card base. Take another piece of the paper collection and make a 5 1/2" by 5 1/2" layer. Add it to the card base. Take a piece of pink cardstock and cut one Decorative Oval. Cut it in Half and add it to the cards top and bottom corner. Take a piece of purple cardstock and cut the largest labels one. Center it on the card. Cut out two of the 2" by 3" card fronts from the paper collection. Stamp the Fuchsia Spray in black ink randomly on each one. Then color them with markers. Round the corners and sponge them with lilac ink. Stamp the Fuchsia Clusters on white cardstock, and color them with markers. Take the labels One and cut the image out. Add double Dots to the back of the image, and place it on the card as shown in the photo. Stamp the Heartfelt Sentiment and buckle on white cardstock. Cut the buckle out with the Everyday Heroes Die, and the sentiment out with the Cut Mat Create 1B Die - Label Strip. Add rhinestones to finish the card off.
Lavender Daisies Love
Cut Mat Create Paper Collection, HCDP1-245
Delightful Daisies Cling Stamp Set, HCPC-3656
Cut Mat Create 2A Die, HCD2-751
Cut Mat Create 1B Die, HCD2-750
Delightful Daisy Die, HCD1-760
Spring Bling Prills - 12 Pack, ANC850
Deluxe Flower Shaping Kit, HCST1-401
Other Products: Paper Studio white trim, Dots Embossing Folder, VersaMark Ink, SU White Embossing Powder, Pearl Spray (stash), Scissors, cardstock in Whisper White, Blueberry Bliss and Old Olive, 1/8" foam tape, We R Memory Keepers Corner Chomper.
Watch the video https://youtu.be/quxqv6wJRic to see how to shape the Deligtful Daisy Flower
Instructions: The final card size is 6 1/4" square. Create a 6 1/4" square card base from white card stock. Select a 6" square panel from the Cut Mat Create Paper Collection and die cut the center image away using the largest square die in the 2A Cut Mat Create die set. Emboss the center image panel with a Dotted Embossing Folder to create texture. Cut a 4 1/4" square Blueberry Bliss panel, round the corners and layer with the embossed panel. Set the prepared panel aside. Adhere the remaining piece of the panel to the card front. Cut white embroidered trim to size to fit the inside border of the piece you just adhered to the card panel. Adhere the trim allowing it to slightly buckle. Set aside.
On coordinating patterned paper from the paper collection, stamp the daisies with VersaMark one time. Use white embossing powder and heat emboss the daisies. Die cut the daisies using the coordinating die, and shape them using a medium sized stylus tip from the Flower Shaping Kit. Add white Prills to the center of each of the shaped daisies. Die cut the leafy vine from the 1B Cut Mat Create die set from Old Olive cardstock. Assemble the daisies and leafy vine onto the prepared center panel as shown in the sample. From the paper collection, select words to use for a banner. Cut the words out in a strip, notch one end and curl to create the word banner. Adhere the word banner and add a pearl spray circle onto the corner of the panel. Using dimensional foam tape, adhere the flower panel to the center of the card.
Wedding Presentation Box
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Cascading Fuchsia Die, HCD1-763
Decorative Oval Die, HCD1-762
Botanical Rose Cling Stamp Set, HCPC-3651
Botanical Wings Die, HCD1-758
Cut Mat Create 2B Die, HCD2-752
Deluxe Flower Shaping Kit, HCST1-401
Stamp Mat Pad, D110305
Zip Dry Paper Glue, 273900
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Other Products: Small gift box, Stampin Up White ink, Zing white embossing powder, Mod Podge, white tissue paper, white card stock, Stampin Up pearls, BigShot die cutting machine, heat tool, white tulle, sponge paint brush, water, water mist bottle, Elmers Spray adhesive.
Instructions: Cut a piece of white tissue paper larger than the box cover you will be covering. Starting at the edge of the tissue paper begin stamping the chosen image (I have used the swirl fuchsia image from the Fuchsia Clusters Cling Stamp Set) onto the tissue paper with white ink. Once you have stamped the image, cover with white embossing powder, shake off and then heat emboss. Repeat this step until you have your pattern completely covering the tissue paper. Next, crumple tissue paper into a ball. Straighten out slightly, however do not smooth out wrinkles. Apply a thin layer of Mod Podge to the top of the box cover and adhere the patterned tissue paper over top making sure to have enough overhang to cover the outer and inner edges. Next adhere Mod Podge to the longest sides of the box and adhere tissue paper. For the shorter edges of the box, apply Mod Podge to the sides and fold tissue paper edges as though you were gift wrapping a present. Trim overhang tissue paper to be close to the same size as possible all around the box for as clean a look as possible for the inner edges of the box. Apply Mod Podge to each edge and fold tissue paper inside. Measure the dimensions of your gift box and cut a small white piece of cardstock slightly smaller than the measurement. Adhere this piece of card stock to the inside top of the box to hide any messy mechanics that may have happened during brushing on the Mod Podge. Set aside cover to dry completely.
Next using a manual die cutting machine cut one decorative oval. Using a spray adhesive, apply to top cover of gift box. Die cut two vining floral corners from the Cut Mat Create 2B die and apply one full die cut to one corner and set aside the second die cut to use later. Stamp the Cascading Fuchsia cling stamp set several times and heat emboss with white embossing powder. Die cut using the Cascading Fuchsia die. Using the Deluxe Flower shaping kit along with some water mist, create three roses varying in size. For a tutorial on shaping roses please see here.
Adhere a small piece of tulle to the corner where you have already applied the vining corner. Adhere two roses among the tulle. Going back to the second vining corner die cut, using a scissor, trim into smaller sections. Adhere the third rose to the opposite corner of the floral cluster. Adhere the smaller vining sections around the single rose. Using white ink, stamp the two leaves from the Botanical Rose Cling Stamp Set, and once again heat emboss using white embossing powder. Add leaves to the floral cluster. Lastly, add small pearls to the centre of each intricate design in the decorative oval and larger pearls to each of the flower centres in the vining die cuts. Bring on the wedding season...your presentation is sure to stand out in this beautiful gift box which will be treasured for years.
Thinking Of You
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Fuchsia Spray Cling Stamp Set, HCPC-3670
Cascading Fuchsia Die, HCD1-763
Cut Mat Create 1B Die, HCD2-750
Clear Cardstock 8.5 x 11, GBKK811B1
Double Dots 100pc. -3D Foam Circles, DDOTS
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Stamp Mat Pad, D110305
Stamp Positioner Kit, 387623
Spellbinders Tool N' One, 359848
Other Products: Paper: Card Stock: SUP A4 Natural White, Peach Bazzill; Ranger: Prick Tool, Bone folder, Heat Gun, Ink Foam Tool; Ink: Black Stazon, Distress Inks: Walnut Stain, Forest Moss, Alcohol ink: Wild Plum, Raisin, Cranberry, Bottle, Pesto; Blending solution; Spellbinder Dies: S5-218 Devine Eloquence; Other: Versa-mark, Fine paint brush, Embossing Enamel.
Instructions: The finished size of this card: 14.8 cm x 21 cm. For the card base, take the SUP A4 card stock and fold in half. Using the bone folder sharpen the fold. Taking the Cascading Fuchsia oval die cut x 2 from the SUP A4, die cut x 2 Peach card stock. Put 1 of the SUP oval frames aside. Cut away the center of the remaining 3 oval frames. Stack and glue these oval rings together, forming a chip board. Keeping and putting aside the SUP lattice off cut for later. To this chipboard frame apply the Forest Moss ink with the foam tool, adding a little Walnut Stain ink to the edges only. Apply Versamark to the frame, clear embossing powder then fix this with the heat gun. Repeat this if needed, so you have a glossy finish over the oval circle. Adhere the remaining SUP Lattice frame to the left side of the center. This will become your guide for the placement for the Fuchsia spray. Taking the clear card stock, cut this to fit the card base front. This will be your card front. Use the stamp positioner to align the stamp, for the Fuchsia spray. Remembering you will be stamping with stazon on the flip side of the clear card stock. (This is because when you use alcohol ink, it will distort the stamped image. So you need to apply the color on the flip side of the stamping.) If you make a mistake, you can remove the ink and alcohol with the blending solution. (But make sure the surface it is dry and clean before continuing.) Color the image with the alcohol inks. Taking the remaining SUP lattice frame centers. Cut and glue to the card front base. Arranging as shown in the photo. Add a very light application of the Forest Moss ink with the foam ink tool. Apply the Walnut Stain to the edges of the base card front. Adhere the clear card stock card front to the base at the frame with the wet glue. When the glue is dry, do the same with the chipboard frame. Holding down so the frame will not slip out of alignment while drying. Taking the HCD-750 Cut Mat Create die set and the S5-218 die set. Find the small tag die and die cut using the SUP A4 card stock. Ink all edges with the distress inks. Stamp the sentiment on the top tag. Adhere the tags together with cut to size Double Dots. Adhere the tag to the lower right of the frame.
Vining Fuchsia
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Cascading Fuchsia Die, HCD1-763
Fuchsia Spray Cling Stamp Set, HCPC-3670
Vining Fuchsia Cling Stamp Set, HCPC-3669
Cascading Fuchsia Paper Collection, HCDP1-254
Open Leaf Cling Stamp Set, HCPC-3545
Classic Leaf Cling Stamp Set, HCPC-3546
Classic Leaf Die, HCD1-736
Arianna Lace Die, HCD1-747
Deluxe Flower Shaping Kit, HCST1-401
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Other Products: Neenah Papers Solar White Cardstock, Kraft Cardstock, Ranger Distress Ink Mini Pads (Seedless Preserves, Spun Sugar, Peeled Paint, Fired Brick), Spellbinders Grand Calibur, Foam Squares, Water Brush.
Watch the video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia Flower
Instructions: Create a 6" x 6" card base using Kraft cardstock. Cover front of card with Cascading Fuchsia Paper Collection. Cut another layer with paper collection measuring 5 1/4" x 5 1/4", mat with kraft cardstock and adhere to card using foam squares.
Stamp Vining Fuchsia on a 6 1/4" x 3 3/4" rectangle of natural white cardstock with black ink. Color with distress inks and water brush. Distress edges and then mat with kraft cardstock. Die cut lace flower, cut out petals and glue behind Vining Fuchsia. Adhere panel to card front using foam squares.
Cut sentiment from paper collection to 2" x 2 3/4", distress edges and mat with kraft cardstock. Adhere to card using foam squares.
Stamp Open Leaf and Classic Leaf onto white cardstock using green ink pad, color with green distress ink pad, shape with shaping kit and adhere to card as shown. Stamp Cascading Fuchsia onto white cardstock using Berrylicious chalk ink pad. Die cut with coordinating Cascading Fuchsia Die. Color flowers with distress inks and then shape with Deluxe Flower Shaping Kit. Roll stamen and then glue under fuchsias. Attach flowers to card under leaves using hot glue.
Cascading Fuchsia Oval
Cascading Fuchsia Paper Collection, HCDP1-254
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Open Leaf Cling Stamp Set, HCPC-3545
Decorative Oval Die, HCD1-762
Cascading Fuchsia Die, HCD1-763
Luggage and Tags Die, HCD1-745
Classic Leaf Die, HCD1-736
Stamp Positioner Kit, 387623
Scor-Pal Measuring & Scoring Board, 173842
Zip Dry Paper Glue, 273900
Designer Dries Clear Adhesive, 159723
Other Products: Corner Rounder, Versa Mark, White Powder, Stickles.
Watch this video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia flowers
Instructions: Prepare your card base at 5" x 7", cut a piece of Yellow Card Stock 4 3/4" x 6 3/4", then cut a piece of white 4 1/2" x 6 1/2". Round all the corners on all 3 pieces. Place the Decorative die in the center of the white and cut out. Adhere all 3 layers and the oval die you just cut out. Stamp all your leaves and flowers. Cut out, shape, and adhere to card. To finish add the tags and stickles to the card.
Pale Pink Fuchsia Cluster
Fuchsia Clusters Cling Stamp Set, HCPC-3671
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Decorative Lace Border Die, HCD1-713
Birds and Blooms Paper Collection, HCDP1-250
Romantique Garden Paper Collection, HCDP1-249
Cut Mat Create Paper Collection, HCDP1-245
Majestic Morning Paper Collection, HCDP1-239
Other Products: Spellbinders Dies (Back to Basics Tags, Grand Ovals, Grand Decorative Ovals One), WorldWin Papers Cardstock (White, Slate Gray), Stampin Up Dye Ink (Going Gray), Clearsnap Colorbox Chalk Ink (Gray Whale, French Blue), Copic alcohol markers (BV0000, BV20, B00, V0000, RV0000, BG10, YG0000, YG11, Y06, Y11, G21, colorless blender), Reflections green self-adhesive pearl, Really Reasonable Ribbon shimmer satin pearl pink ribbon, Wilton white doily, Tools (Sizzix Big Shot, My Sweet Petunia MISTI, hot glue gun), Adhesive (Scotch 3M ATG tape and foam tape, Scrapbook Adhesives by 3L 3D Foam Squares, hot glue sticks).
Instructions: Create a 6" x 6", top-fold card by cutting gray cardstock to 6" x 12" and scoring at 6" on the long side. Cut white cardstock to 5 7/8" x 5 7/8" and attach to the card front. Trim blue print paper from the Birds and Blooms Collection to 5 3/4" x 5 3/4" and attach to the white panel on the card front. Cut pale pink print paper from the Romantique Garden Collection to 5" x 2 1/2" and mat with gray cardstock cut to 5 1/8" x 2 5/8". Attach the pink panel to the left edge of the card, approximately 1/4" from the left edge and 1 1/2" from the bottom edge. Attach a white doily to the upper left quadrant of the card front. Trim green paper from the Majestic Morning Paper Collection to 3 7/8" x 5 3/8" and mat with gray cardstock cut to 4" x 5 1/2". Use the Decorative Lace Border Die to cut a border from the dark pink Cut Mat Create paper. Wrap the decorative lace border around the bottom half of the green panel and secure at the back. Attach the green panel to the right side of the card front.
Stamp the image from the Fuchsia Clusters Cling Stamp Set onto white cardstock with gray ink. Color the image with Copic markers. Use BG10 and the colorless blender to create a "stippled" blue background for the flower image. Use the Spellbinders Grand Oval die template to cut out the image. Sponge the edges of the oval with French blue and gray chalk ink. Use the Spellbinders Grand Decorative Ovals die to cut a decorative oval from white cardstock. Attach the image to the decorative oval die cut with foam adhesive. Attach the matted image to the right side of the card front with foam adhesive, centering the image onto the green panel.
Create a bow from pearl pink shimmer satin ribbon and glue to the top left side of the image as shown. Stamp the sentiment from the Heartfelt Sentiments Cling Stamp Set onto white cardstock with gray ink. Trim out the sentiment using the Spellbinders Back to Basics Tag die template. Sponge the edges of the sentiment tag with French blue and gray chalk ink and attach it to the left edge of the card with foam adhesive, overlapping one edge of the image. Glue a green pearl to the tag as shown.
Decorate the inside of the card by first trimming a dark pink panel from the Cut Mat Create Paper Collection to 5 7/8" x 5 7/8". Attach the panel to the inside of the card. Trim white cardstock to 5 3/4" x 5 3/4" and attach the panel to the inside of the card. Visit my blog HERE for more photos and inspiration.
Best Blue Blooms
Deluxe Flower Shaping Kit, HCST1-401
Leafy Branch Die, HCD1-757
Birds and Blooms Cling Stamp Set, HCPC-3644
Cut Mat Create 2A Die, HCD2-751
Celebrate the Journey Sentiments Cling Stamp Set, HCPC-3596
Once Upon a Time Die, HCD1-744
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Other Products: Faded Jeans and Peeled Paint Distress Ink, White Card, gems, 3D foam pads, ribbon, Spellbinders Royal Circle Die.
Watch this video https://youtu.be/JFrj2XialLs to see how to shape the Birds and Blooms flowers.
Instructions: Cut an A6 side fold card. Cut a piece of card 5 10/16" x 4" cut another piece 5 1/2" x 3 3/4" and adhere together with 3D foam pads. Adhere ribbon around the pieces and then adhere to the card with 3D foam pads. Die cut the small die from the Royal Circle die set and ink the edges. Stamp the sentiment and die cut, and ink the edges. Adhere the sentiment to the die cut and adhere to the card. Die cut the leaf swirls and colour with inks. Stamp, cut and colour the flowers. Shape the flowers and add a gem into the centre. Adhere the leaf swirl (cut into sections) and the flowers to the card and your project is complete.
Botanical Rose Card
Deluxe Flower Shaping Kit, HCST1-401
Cut Mat Create 2A Die, HCD2-751
Open Leaf Cling Stamp Set, HCPC-3545
Classic Leaf Die, HCD1-736
Everyday Heroes Paper Collection, HCDP1-253
Botanical Wings Die, HCD1-758
Botanical Rose Cling Stamp Set, HCPC-3651
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Designer Dries Clear Adhesive, 159723
Other Products: Antique Linen, Broken China and Peeled Paint Distress Inks, glitter glue, beads, white card, craft knife.
Watch this video https://youtu.be/quxqv6wJRic to see how to shape the Botanical Rose flowers.
Instructions: Cut a tent fold card 5 1/4" x 3 14/16". Cut two card fronts from the paper pad. Adhere one to the inner of the card. Stamp the sentiment on the other and cut out the layers with a craft knife. Adhere the outer layer to the card. Adhere the next with 3D foam pads and then the inner with double layered foam pads for height. Die cut the leaf swirl from the Cut Mat Create set and cut into three sections. Stamp, cut, colour and shape the flowers and leaves. Adhere beads into the centre of the flowers. Adhere the flowers and leaves to the card and the leaf swirls and your project is complete.
Botanical Rose Gift Bag
Deluxe Flower Shaping Kit, HCST1-401
Leafy Branch Die, HCD1-757
Leafy Branch Cling Stamp Set, HCPC-3645
Everyday Heroes Paper Collection, HCDP1-253
Botanical Wings Die, HCD1-758
Botanical Rose Cling Stamp Set, HCPC-3651
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Designer Dries Clear Adhesive, 159723
Other Products: Antique Linen, Broken China and Peeled Paint Distress Inks, glitter glue, Gift bag template, Pearl gems, beads, self adhesive velcro dots.
Watch this video https://youtu.be/quxqv6wJRic to see how to shape the Botanical Rose flowers.
Instructions: Draw around the template and cut out of paper from the paper pad. Score, fold and adhere the template together. Stamp, cut, colour and shape the flowers and leaves. Adhere beads into the centre of the flowers. Cut a border strip from the paper and adhere around the bag base. Adhere pearl gems around the base of the bag. Adhere the flowers and leaves to the bag. Glitter the flower and border patterns, Secure the velcro dots so that the bag holds shut and your project is complete.
Celebrating Your Special Day
Countryside Evening Paper Collection, HCDP1-229
Fuchsia Spray Cling Stamp Set, HCPC-3670
Cascading Fuchsia Cling Stamp Set, HCPC-3668
Heartfelt Sentiments Cling Stamp Set, HCPC-3673
Open Leaf Cling Stamp Set, HCPC-3545
Decorative Oval Die, HCD1-762
Cascading Fuchsia Die, HCD1-763
Cut Mat Create 2B Die, HCD2-752
Classic Leaf Die, HCD1-736
Deluxe Flower Shaping Kit, HCST1-401
Memento Dye Ink Pad - Paris Dusk, TSMP608
Memento Dye Ink Pad - Nautical Blue, TSMP607
Memento Dye Ink Pad - Desert Sand, TSMP804
Stamp Mat Pad, D110305
Spellbinders Tool N' One, 359848
Zip Dry Paper Glue, 273900
Other Products: White card stock, Spellbinders Classic Ovals Set (LG), lace ribbon, gold cord, VersaFine black ink, Memento Ink - Sweet Plum, VersaColor Pine Cone ink, BigShot die cutting machine, scissors, gold colored gems, washi tape for masking, Elmers spray adhesive, water, mister bottle, Vintage Photo Stickles, Ranger sponge ink tool.
Watch this video https://youtu.be/wfE_p3jAxpU to see how to shape the Cascading Fuchsia flower
Instructions: Cut a piece of white card stock measuring 4 1/4" x 12" and fold in half to create your card base. Locate the background paper shown here in the paper collection and cut to cover card base. Mask off any area on the card base you do not wish to have any image stamped over. Using Paris Dusk Memento color, ink the Fuchsia Spray Cling Stamp Set, and create a patterned background in the open area of the paper. Ink all edges of the card front with a light brown ink. Using a light cream patterned paper from the paper collection and a manual die cutting machine, cut a decorative oval. Next, locate the oval image shown which is part of a smaller pre-made card panel. Die cut the oval image using the Spellbinders oval die. Ink around the oval with a light brown ink. Using the same paper you cut the decorative oval, trace the Spellbinders oval die you just used around the outside of the die to create a mat for the oval image. Once again ink with a light brown color. Adhere both ovals together. Using the Nautical Blue Memento ink, stamp the sentiment of your choice. Adhere card front to the card base. Using a spray adhesive apply the decorative oval to the card base. Next adhere the matted oval to the card as shown.
Choose a lighter blue paper from the paper collection and stamp your fuchsia images. Lightly ink the flower portion with a soft purple in some areas and a light cream colored ink in others with ink tool. Ink the stamen and flower tops with a blue colored ink. Die cut the flowers with the coordinating die. Shape flowers, one in each size. Next, using the same blue paper, stamp several of each of the stamps in the Open Leaf Cling Stamp Set. Die cut using the coordinating die and shape as desired. Lastly, using a darker green paper from the paper collection die cut one vining corner from the Cut Mat Create 2B die. Snip into pieces. Begin by placing your leaves around the sentiment oval as well as positioning your flowers where you would like them to be. Once happy with placement adhere to card, filling in more leaves as needed. Create loopy bow and attach as shown. Take snipped pieces of the vines and add where desired within the leaves. Lastly add gold tone gems as desired. For the finishing touch add some stickles to the tips of petals on the flowers as well as to the bottom of the stamens. You now have an any occasion card ready for that next special event...whether it be a wedding, anniversary, or birthday!