Other Products: Canson water color Paper; Coffee Archival Ink, Foam Adhesive, white cardstock, Distress Inks: Peeled Paint, Aged Mahogany, Vintage photo, Hobby Lobby envelope, thin burlap trim, jute chord in black, corrugated cardboard, Gesso, gold glimmer mist, patina glimmer mist, chipboard to use as base for envelope, Versa mark, white embossing powder, trinket pins

Watch this tutorial for tips on using the Festive Holly collection here.

Watch this tutorial for tips on using the Winters Eve Window Frame here.

Instructions: To see a close up view of this envelope check out this link. Card base is 6 x 9". Cover back of envelope with white chipboard to give the envelope stability. Cut a piece of cardboard form a discarded box to 6 x 9", peel off first layer of thin paper, Gesso cardboard. Wait for it to dry, then dab with gold glimmer mist and patina glimmer mist. Set aside to dry. Use papers from collection for mat. Cut out two of the card panels as shown ( 5.75 x 7"). Distress edges of papers and adhere on top of cardboard. 

Stamp 10 sets of the mini poinsettia from celebrate the season from white cardstock. Stamp the flowers in Aged Mahogany and color with same in using daubers. Stamp Leaves in Vintage photo ink and color with Peeled Paint ink using daubers.

Stamp wreath in black ink on white cardstock and die cut with coordinating die. Color using Peeled Paint ink and shape using the Deluxe Flower Shaping Kit. Cut wreath in half and drape across the window as shown. Attach prills to centers and attach flower to leaves using dries clear glue. Detail with crystal clear powder and Frosting powder. Stamp Festive Holly corner and Holly Bough in Vintage Photo ink on white cardstock. Die cut with coordinating dies. Color using Peeled Paint ink and shape using Deluxe Flower Shaping Kit.

Stamp the window and frame with Versamark and heat emboss with white embossing powder. Attach the frame to a piece of clear cardstock using dries clear glue, attach to card using foam as i have done. 

Wrap burlap trim around envelope and tie in a bow, attach black jute chord and trinket pins. Assemble envelope as shown. Add Dries Clear glue on where desired and sprinkle with Rajni's Crystal Clear powder. I used Rajni's Frosting Powder on the flowers for a frosted look. Heat Set.

Other Products: Crafters Companion White-hint of gold 300gm, Nuvo Crystal Drops Glossy-Pale Gold, Diamond Stickles, Hot Glue Gun, Inking tool, Bone folder, Water colouring brush, Scissors, Ruler, Black Archival Ink, Distress inks: Broken China, Mowed Lawn, Fired Brick; Hot glue gun, Fussy Cutting Scissors, Double sided Tape, Double Sided Foam Tape, Organza Ribbon, Misti, Glue dot

Click HERE to see the video on using the Deluxe Flower Shaping Tool

For tips on how to cut intricate dies check out this tutorial.

Instructions: The finished size of this tent fold card is 5 1/4" x 5 1/4" (13.5 cm x 13.5 cm). Make the card base with the white card stock. Find the blue design paper in the Winter's Eve collection. Cut two layers of matting papers, about 1/4" (.5 cm) smaller than the card base and adhere using 3D foam dots in between each layer (allow space for a ribbon to go beneath the bottom layer, as shown).

Taking the stamp and die sets for the window box fillers, stamp, die cut, colour and shape images. I used black ink on white cardstock to stamp and Distress inks: Broken China, Mowed Lawn, Fired Brick to colour using daubers. Apply the black and gold crystal drops to the flower centres and set aside to dry. 

Die cut two of the window boxs and ink the box edges using Broken China ink. Adhere the flower arranger piece to the front inside of the box, adhere the flowers and leaves to the slots with the hot glue gun. When the slots are full and you are happy with the arrangement, adhere the rest of the box together. This flower box has a back and will be closed on all sides. 

Die cut one window decorative border (HCD1-7150), two decorative lattice (HCD1-7150) and two decorative arch (HCD1-7146) from white cardstock. Ink using Broken China ink along with the daubers. Adhere decorative border across the flower box base as shown and the two decorative lattice pieces and two decorative archs directly onto card base as shown. 

Make a bow from the ribbon. Adhere a ribbon band across the front of the matting at the base of the flower box. Adhere the bow with a glue dot. To finish, apply a little Diamond Stickles to the blue flower petals.

Other Products: Neenah Papers White Cardstock, White Metallic Cardstock, Ranger Distress Inks in Spun Sugar, Peeled Paint and Broken China, Memento Ink Pad in Espresso Truffle, Glitter Drops in Sunlit Meadow and Ruby slippers, Nuvo Crystal Drops in Ivory Seashell and Autumn Red, Spellbinders Platinum Die Cutting Machine, Silk Ribbon

For tips on how to cut intricate dies check out this tutorial.

Watch this tutorial for tips on using the Winters Eve Window Frame here.

Instructions: Create a 5" x 7" card base from white metallic cardstock, cover front of card with Winter’s Eve paper collection. Cut a 5" x 7" piece from white metallic cardstock, cover with paper collection and then adhere to card base in the opposite direction as pictured.

Stamp Window Frame with brown ink onto designer paper from Winter’s Eve paper collection. Die cut with coordinating die. Lightly sponge edges with Espresso Truffle ink. Cut Christmas tree background from paper collection. Adhere behind window with foam tape.

Die cut Window Box Elements from metallic white cardstock. Cut decorative lattice in half vertically. Adhere window frame and elements to center of card. Die cut Window Box from paper collection, stamp sentiment with brown ink. Assemble Window Box, adhere flower arranger on the inside and the border directly onto outside of window box. Adhere window box onto card. 

Stamp Window Box Fillers multiple times with brown ink onto white cardstock, die cut with coordinating dies. Color flowers and leaves with Distress Inks: Spun Sugar, Broken China, and Peeled Paint. Shape with Flower Shaping Kit and then arrange and glue inside window box.

Create a bow with silk ribbon, glue to card. Adhere more flowers on ribbon and side of card as pictured. Add Dries clear glue and Crystal glitter on flowers as desired. Finally embellish flower centers with Nuvo Crystal Drops.

Other Products: White cardstock, archival Ink-black, plum, rose madder, diamond dust, beads-golden

Instructions: Take a cardstock size 7” x 14”, score and fold it to half (side fold). Final size is 7” x 7”. Now take a pattern paper from Winter's Eve Collection which is 6” x 6” size and distress the edges. Die cut the centre of this same panel with circle die and adhere it with foam tape to give dimension. Adhere two decorative dies from the window box element die set, as shown on the picture.

Now take white cardstock and stamp the large sparkling Poinsettia cling stamp set flower with rose madder ink and die cut it with the coordinating die. Color with archival ink-rose madder and plum to create one large poinsettia flower with leaves and sprinkle diamond dust. At the centre add dries clear adhesive and golden beads. Now take another stamp of Sparkling Poinsettia cling stamp set flower and do it the similar way. Adhere them on the right side as shown in the picture. For leaves stamp with black archival ink on white cardstock and die cut with coordinating die. Color them with Fern Green and Plum on the edges.

Add sentiment from the pattern paper (fussy cut) and mat it on the white cardstock and adhere it with foam to give some dimension. On the base of the cardstock around the edges add some crystal clear with dries clear glue to give some glittery effects.

Other Products: White Cardstock, white pearlised cardstock, 3D foam tape, Foamiran, waterproof black ink, puffing snow, water color paints

For EZ tips to create your own warm and cozy winter scene click here

For tips on how to cut intricate dies check out this tutorial.

Instructions: Score and fold A4 white pearlised paper in half. From Winter's Eve Paper Collection, cut paper and adhere it to the card base. Stamp Window Frame stamp set onto blue designer paper using black ink and die cut with matching die. Die cut Window Box Elements pieces from same blue designer paper. Assemble window box and add border using dries clear glue. Cut intricate lattice design in half vertically. Adhere decorative window topper to card base using 3D tape.

To create leaves stamp with black ink on white cardstock using the Festive Holly & Cardinals cling stamp. Die cut with coordinating die. Color leaves using water color paints. Stamp twigs from Window Box Fillers stamp set onto white paper using black ink and die cut with the coordinating die. 

Arrange the leaves around window as shown, adhere using hot glue gun. Add puffing snow on twigs as shown and sprinkle with Rajni's Crystal Clear glitter, heat set.

Other Products: White cardstock, Versamark ink, Distress Crackle Paint, sponge, Victorian Velvet Distress ink, Angel Pink Memento ink, dimensional tape

For tips on how to cut intricate dies check out this tutorial.

Instructions: My card is 4 1/4 X 5 1/2". Make card base and layer two pieces of the paper collection that have been distressed around the edges. I also added contrasting ink along the edges to make them stand out more.

Now take your sponge and dip it in the Crackle paint and dab it onto the piece of the paper collection. Sprinkle the Crystal Clear all over the card. This can be done using any type of glue that dries clear. The Crystal Clear is a wonderful product! 

Die cut the decorative die using white cardstock and glue it down to the card base. Stamp the poinsettias petals in Versamark ink, Emboss with Aged Ivory Embossing Powder. Heat Set and diecut. I used Angel Pink Memento Ink to color the petals and went around the edges with Victorian Velvet. Stamp, color and die cut the leaves and adhere glitter to the veins of the leaves. Spray the backs of the flowers and leaves and shape then glue the flower together. Adhere the Poinsettia and Leaves on to card as shown.   

Next I found the little sentiment on the paper and cut it out and then I layered it with a piece of green designer paper. I curled it a bit and then used dimensional tape to adhere it to the front of the c card.

Other Products: Archival inks Black, Fern Green, Library Green, Plum, Magenta Hue, Fussy Cut Scissors, Smooth White Cardstock, Peeled Paint, Vintage Photo, Evergreen Bough, seed beads, 3D foam

For EZ tips to create your own warm and cozy winter scene click here.

For tips on how to cut intricate dies check out this tutorial.

Instructions: The finished card measures 7" by 7". Choose a 6" by 6" panel from the designer paper collection. prepare a white cardstock mat 6 1/8" x 6 1/8" and a maroon designer paper 6 9/16" x 6 9/16". Distress all the sides of the designer paper using scissors. Adhere together using foam dots between layers as desired.

Die cut the center panel using Cut Mat Create 2A die. Layer it as shown, using foam tapes. 

Stamp the window frame in black ink on white cardstock. Die cut with coordinating dies and color. Distress the window using Vintage Photo and Evergreen Bough. Randomly paint the window with an adhesive that dries white and sprinkle Frosting Powder to form snowy looks. 

To create a see through the window paste 2-3 cut outs from Window Frame Die and adhering the acetate sheet between the top layer and the second layer. Choose a background and cut down to window size and adhere on the back of the window layers. Adhere the window on the center panel using glue. 

Die cut two decorative archs HCD1-7146 from maroon designer paper. Adhere on the two corners as shown. Stamp a few images of trees from Snow Kissed Spruce Cling Stamp using Library Green and Olive Green Archival Ink. Distress them a little with Peeled Paint. Apply glue that dries clear and Sprinkle Frosting Powder. Heat set if you want to add extra frost. Diecut sled image from designer paper using coordinating die. Fussy cut deer and sentiment from paper pad.

Stamp a few poinsettia flowers from Celebrate the Season Stamp Set and Ornate Sleigh Cling Stamp Set on white cardstock and die cut using their coordinating dies. Stamp and color them with Carnation Red and Magenta Hue Archival Ink. Shape them using Deluxe Flower Shaping Kit. Add seed beads in the center and sprinkle some Crystal Clear and Frosting Powder using an adhesive that dries clear. Stamp poinsettia leaves on white cardstock with library Green ink and diecut. Color with Fern Leaf ink and shape using the Deluxe flower shaping kit.

Stamp Holly & Berries corner (HCPC-3791) and Window Box Filler flowers and holly (HCPC-3795) in black ink on white cardstock and diecut with coordinating dies. Shape using Deluxe Flower Shaping Kit.

Arrange images as shown and adhere using a clear drying adhesive and 3D foam dots as desired. Add dries white where deisred (sled, trees, sentiment) and sprinkle Frosting Powder. Heat set if desired. I added a dries clear glue around maroon border and on flowers and sprinkled Crystal Clear.

Other Products: Paper: Recollections White; Ink: VersaFine Onyx Black, VersaMark; Accessories: Clear Wink of Stella, Xyron Machine, pop dots, Scor-Tape, 2 1/2" x 8" White Notepads (Papertrey Ink), Large Oval Punch (Stampin Up), edge distressor, White Embossing Powder (Stampin Up)

For tips on how to cut intricate dies check out this tutorial.

Instructions: Covered notepad measures 2 5/8" x 8 1/4". Follow the instructions found here on Split Coast Stampers with the exception of the 2 pieces of pattern paper used to cover the front and inside of pad. I cut mine 2 3/8" x 8" instead. I used the pink designer paper from the Winter's Eve Paper Collection for these pieces, the piece to cover the top of the notepad and for the flowers. Distress the 2 mats before adhering to the front and inside covers.

To decorate the front cover, die cut the decorative die from the Window Box Elements Die Set using white cardstock. Run it through the Xyron Machine and adhere as pictured. 

Using VersaMark Ink on the pink designer paper, stamp the small flowers and leaves from the Ornate Sleigh Set twice and the large flowers and leaves from the Celebrate the Season Set twice. Then heat emboss with white embossing powder. Die cut with the matching dies from Celebrate the Season and Ornate Sleigh & Presents Dies. Shape the flowers and leaves with the Deluxe Flower Shaping Kit, glue the flowers and leaves together and then glue the 2 larger flowers and 1 smaller flower to the pad as pictured.

Stamp the sentiment from the Winter's Eve Set on white cardstock with Onyx Black Ink and use the Large Oval Punch to cut it. Add to the pad cover using pop dots. Glue the remaining smaller flower as pictured. Add Minnie Pearl Prills to the flower centers using Designer Dries Clear Glue. Add Clear Wink of Stella to the flowers and leaves as desired.

Other Products: Paper trimmer, Chameleon Pencils Number 2, 9, 10, 14, 17, 18, 19, Chameleon Pens Grass Green and Crimson Red, Stampin Up Early Espresso ink, ribbon, Graphic 45 5x5" mixed media box, foam strips

Watch this tutorial to see how to create the flower box at: (here) and how to make pop cards at: https://youtu.be/QKOad1-B4ws

Instructions: Christmas Window Box with note cards. Using the Winter's Eve designer paper, cut two pieces 5 x 5" for the cover and inside of the cover, 4 pieces of 5 x 2" tall strips to cover outside of the box, 4 pieces 4 3/4 by 1 7/8" tall strips to cover the inside sides of the box and 4 3/4 x 4 3/4" for the inside bottom of the box. Adhere these pieces using dries clear glue to the appropriate places inside and outside of the box. 

Die cut the window pieces from white cardstock using the Window Frame dies. Stamp the Foliage & Berries Window Box Fillers stamp set the with Stampin Up Early Espresso ink. Die cut with coordinating die and color six sets of the window fillers using Chameleon pens Grass Green and Crimson Red. 

Stamp Girl/Tree image from the Winter's Eve stamp set with Stampin up Early Expresso ink the tree. Color the images with Chameleon Pencils Numbers 2, 9, 10, 14, 17, 18, 19. 

Place and glue completed stamped image down on the top of the box. Assemble and arrange the window pieces including the flower pot on the top of the box. Cut three cards from the Winter's Eve designer paper for the front of each of the cards. Use three different kinds of ribbon and tie around the side of the box. 

Small cards inside box: Cut three pieces of white cardstock 7 1/2 x 4 1/2". On the 7 1/2" side score at 3 3/4" and fold card in half. Cut three pieces of green designer paper 3 1/2 x 4 1/4" and adhere directly onto card base. Fussy cut three small panels from the Winter's Eve paper collection. Attach to card base using foam strips. Assemble ribbon bow and glue on the front of each panel.

Inside pop up on cards: Cut three pieces of striped designer paper at 7 1/4 x 4 1/4". Score and fold in half. Using the instructions provided in the video make a 1" cut (on the fold) toward the center and another 1" cut an inch away from first cut. Pop the strip you just cut up and attach designer paper to inside of card base (make sure not to glue your center pop up). Fussy cut 3 tags from paper collection. Adhere one tag on the pop up on inside of card and add a pearl to tag. Repeat this on all three cards.

Other Products: Grey Cardstock, White Cardstock, Versamark, Metallic Pewter Embossing Powder, Distressed Inks (Walnut Stain and Charcoal Grey), White Super Fine Embossing Powder, Gun smoke Stickles, Archival Red Geranium Ink, Vintage Sparkle Pink Embossing Powder and die cutting machine

For EZ tips to create your own warm and cozy winter scene click here

For tips on how to cut intricate dies check out this tutorial.

Instructions: Start by taking a 12" x 7" piece of white cardstock and score it at the 6" mark to create a 6" x 7" card. Layer the front with a 5 3/4" x 6 3/4" piece of grey cardstock and a 5 1/2" x 6 1/2" piece of decorative paper from the Winter's Eve Paper Collection.  

Next we will build our window. First I stamped the Window Frame Cling Stamp Set on White cardstock using Versamark and heat embossed with Metallic Pewter Embossing Powder before die cutting with the matching die and distressing with Charcoal Grey Ink. For added dimension I die cut several more layers of the window frame and glued them to the back. Once your frame is assembled I used an image from the Winter's Eve Paper Collection fastened on the back and completed the window with die cuts from the Window Box Elements Die out of grey cardstock.  

The Ornate Sleigh was stamped on paper from the Winter's Eve Paper Collection using Versamark and heat embossed with White Super Fine Embossing Powder before die cutting with the matching die and finally accented with Gunsmoke Stickles. 

The Holly Leaf images were stamped on white cardstock with Northern Pine and die cut with the matching die before coloring with Cottage Ivy and Red Geranium inks. The Poinsettia flowers were stamped on white cardstock with Versamark and heat embossed with Vintage Sparkle Pink Embossing Powder and die cut with the matching die before coloring with Rouge Ink. Finally shaping the flowers with the Deluxe Flower Shaping tool. The images of the presents were stamped on white cardstock with Versamark and heat embossed with Metallic Pewter Embossing Powder before die cutting with the matching dies and distressing with Rouge ink and accented with Gun smoke Stickles.  

Finally the image of the toy sled was stamped on white cardstock using Rich Cocoa and die cut with the matching die before coloring with a combination of Walnut Stain and Red Red Geranium inks. Cut sentiment from designer paper. Arrange all as shown and adhere using both dries clear glue and foam dots. Add Rajni's Crystal Clear on flowers, leaves, window and anywhere else you desire.

Other Products: Pearl White Metallic Cardstock, Pink Pearl Cardstock, Green Pearl Cardstock, Pink ribbon, Bow-it-All, Pink Ribbon, VersaMark, Christmas Red Stickles, Dimensional tape, Heat Gun, Glue Gun, Big Shot, sponge

Learn how to shape the Sparking Poinsettias here: https://www.youtube.com/watch?v=1INCr0klRIQ

For tips on how to cut intricate dies check out this tutorial.

Instructions: Create a 6” x 6” white card base. Cut pink paper from the Winter’s Eve Paper Collection 5 7/8” x 5 7/8” and distress the edges. Cut another lighter piece of designer paper 5 3/4” x 5 3/4” and distress the edges. Adhere together with Dries Clear Glue. Adhere to the card base using dimensional tape. 

Stamp the poinsettias on pink cardstock using VersaMark, heat emboss with Aged Ivory Embossing Powder and die cut using the matching dies. Shape using the Deluxe Flower Shaping Kit, adhere the petals together with Dries Clear Adhesive and add prills to the centers. 

Stamp the holly and cardinals on green pearl cardstock with VersaMark, heat emboss with Aged Ivory embossing powder, die cut using the matching dies and shape. Color the berries and the cardinal with Stickles and let dry. Shape using the Deluxe Flower Shaping Kit.  

Using pink pearl cardstock, cut the decorative die from the Window Box Elements die set and adhere to the card base as shown with Dries Clear Adhesive. Adhere the Poinsettias and Holly to the card base as shown using hot glue gun. Using a sponge and Dries Clear Adhesive apply adhesive to the poinsettias, holly and decorative die and sprinkle with Rajni Chawla’s Crystal Clear. Make a triple layer bow and adhere to the side of the card.

Other Products: Westcott Brand Trimmer/Scissors, Acetate, foam

For EZ tips to create your own warm and cozy winter scene click here

Instructions: Take your 8 1/2" x 5.5" white cardstock and and score your card at 4 1/4". Choose a panel from the Winter's Eve paper collection and adhere it onto card base. Fussy cut the Christmas angel from the patterned paper which will be used as an added embellishment.  

Next die cut your window frame using a piece of patterned paper and another cut using craft foam. You will then lay the frame cut from the patterned paper on top of the foam. Then cut a piece of clear actetate to the size of the frame for a clear window.

Die cut two pieces from the windows box element set on white cardstock. Fold each diecut piece in half lengthwise and glue along the edge of card on each side. Cut sentiment from paper pad and mat in white cardstock. Attach onto upper right corner of card and fussy angel on bottom left hand side.

Other Products: White and Pink Card stock, Pearlescent Ivy

Instructions: Prepare a card base 6 1/4 x 6 1/4", to achieve this cut one piece 6 1/4 x 6 1/4", another piece 6 1/4 x 7 1/4", score at 1 inch, and adhere the two together. Begin with pink cardstock then Winter's Eve Paper, white cardstock, pink cardstock, white cardstock and another piece of Winter's Eve paper keeping each layer 1/4" smaller. 

Die cut the Festive Holiday die out with pink cardstock and adhere to the upper left hand corner. Cut the Regal Borders and Pockets die out of white cardstock and adhere to the bottom of the card as shown.  

Stamp the Cardinals, flowers and leaves all on Velum with Color Box white, emboss with White embossing powder, heat set. Die cut with coordinating dies and apply inks to the back using daubers. Green for the leaves and Lipstick Red for the Cardinals and flowers. Lightly shape using the Deluxe flower shaping kit.

Sponge on glue to the border at the bottom and around the upper part of the card then sprinkle Rajni Chawla's Crystal Clear glitter on and around card. Adhere everything to the card. To finish, add Yellow Crystal drops to the center of each flower.

Other Products: Vintage Glass glitter, rhinestones, Spellbinder poinsettia die, Spellbinder 5 X 7" Elegant Labels 4 and Labels 4, Brilliance Orchid, Brilliance Lime, Glitter Snow Paste, Copic Markers R21, R24, R29, R14, Y32, Y15, Y35, Y38, C01, C02, C03, W01, W02, W03, E51, E53, E33, R35, YG11, YG05, G14

For EZ tips to create your own warm and cozy winter scene click here.

For tips on how to cut intricate dies check out this tutorial.

Instructions: Card size is 5" X 7". I cut 2 pieces of 5 X 7" white linen cardstock for the base and extra piece 5 X 2" folded in half to make a hinge (since I did not have 14 X 5" cardstock to make the base one piece). Glue front and back to the cut out hinge (hinge is cut with die hanging over the fold so that it will not cut apart). 

Cut inside and outside designer paper with Labels 4 and then use the small die of the 5 x 7" Elegant labels 4 just for the inside. Layer the labels 4 and elegant labels 4 together for the inside and glue to the inside.  

Stamp the fireplace with black ink, die cut with Cut, Mat and create 1B die. Color using Copic markers then sponge edges with Brilliance Orchid and glue to inside up high enough to add the sentiment. Stamp sentiment in black ink and die cut using another Spellbinder die.  

Next start working on the front. Glue blue die cut designer panel to front of card base, die cut window opening out of card front. 

Using black ink on white cardstock, stamp and die cut the window frame, window candle, and window box fillers. Color using Copic Markers. Stamp Poinsettias in Rose Bud ink on white paper and diecut with coordinating dies. Shape all images using the Deluxe Flower Shaping it

Die cut Raindrops on Roses medallion on white cardstock. Die cut window box (all parts) and Window Box Elements on blue designer paper and assemble window box, adding the box trim and enough of the Raindrops on Roses medallion to reach the bottom of the box.  

Adhere candle to back of window. Arrange flower box fillers as shown (cutting and arranging as necessary to let candle show through window). Adhere to window box. Add formed poinsettias filled with gold Prills to the front of the box and paint on some snow paste then glitter. Finish with rhinestones.

Other Products: Die cutting machine, Spellbinders Labels Twenty-Two, Pearls, White cardstock, foam strips.

For tips on how to cut intricate dies check out this tutorial.

Instructions: Cut a piece of cardstock at 6" x 12", cut and score at 6" along the long side to make a base card 6" x 6". Cut a piece of blue patterned paper 6" x 6" and adhere to the front of the card.

Die cut two semi-circular medallions from the HCD1-7144 Classic Wedding Decorative Medallions Dies from white cardstock and adhere to the top and bottom of the card as shown. Cut a piece of white cardstock at 6" x 3" and die cut the lacy edge from the HCD1-783 Border Essentials. Cut a piece of blue patterned paper 5/16" x 6" and adhere to the middle of the lace strip. Add pearl strips to the edge of the patterned paper. Adhere the strip to the centre of the card as shown.  

Die cut the medium size die from the Labels Twenty-Two die set from white cardstock. Create the frames by using the next two die sizes together, and adhere together and then add to the base frame as shown. Die cut the church image from the paper collection using the smaller frame die and adhere to the centre of the frame. Adhere the frame to the card using foam strips

 Add sentiment strip cut from Winter's Eve collection.

Other Products: Archival inks-saffron, pink poeny, leaf green Fern, Rangers Ice Stickles, Black ink, piece of kraft card stock, Espresso distress ink

Watch this tutorial for tips on using the Winters Eve Window Frame here.

For tips on how to cut intricate dies check out this tutorial.

Instructions: The finished card measures 7.5" by 7.5". Cut a card base from white cardstock. Cut coordinating pattern paper from the paper collection. Adhere to the card front.

Die cut the window Box and flower arranger from Kraft card stock and assemble and glue it. Die cut the lace border from white cardstock and add to the window box. 

Stamp a sentiment on designer paper in black ink and add to the box front.

Stamp the flowers and leaves with black ink on white card stock and colour with archival inks using the daubers. 

Die cut with coordinating dies and shape on the flower making tool kit. Add stickles on the flowers and allow drying time. Arrange the flowers and leaves inside the box as shown.

Stamp the window die and colour with distress ink. Cut with coordinating die. Cut a pattern paper to the size of the window diecut and adhere to the window back. Adhere the whole piece to the card front.

Die cut the decorative arch from the Festive Holiday die HCD1-7146 from white cardstock. Die cut decorative lattice piece from Window Box elements HCD1-7150 from white cardstock. Cut a decorative Lattice in half lengthwise. Adhere to the sides and top of the window as shown. Adhere the box with flowers on the card front.

Other Products: Memento Dye Ink Pad- Love Letters; Art Glitter Yuletide Dazzlers; Art Glitter Ultrafine Transparent- Green Briar; Want2Scrap 72 Count- Red Rhinestones; Want2Scrap 72 Count- Green Rhinestones; Ranger Stickles- Yellow

Instructions: Create a 6" x 6" card base out of white cardstock. Next cut a 6" x 6" card front from the Winter's Eve Paper Collection and then die cut the center image using the coordinating Cut Mat Create 2A Die. Sponge the outer edge of the 6" square card front with Cottage Ivy Memento ink and then adhere to the card base with pop dots. 

Next adhere the die cut square directly to the card base with Dries Clear Adhesive. Cut the sentiment from the design paper and sponge edges with Teal Zeal Memento Ink and adhere to card with pop dots. 

On white cardstock with Tuxedo Black ink stamp the cardinal image from the Festive Holly and Cardinals Stamp Set, with Olive Grove Memento Ink. Stamp a small and a large tree image from the Snow Kissed Spruce Set and with Tuxedo Black Memento Ink stamp the twig image from the Window Box Fillers Stamp Set and die cut all with their coordinating dies. 

Using Stack and Store Daubers, Fantastix and the Dove Blender Pen as needed, color the cardinal and berries with Rhubarb Stalk, Lady Bug and Love Letters Memento Inks. The cardinal's beak and feet with Cantaloupe Memento Ink, the tree trunks and the branch with Rich Cocoa Memento Ink and the holly leaves with New Sprout and Bamboo Leaves Memento Inks. Shape cardinal and holly, the branch and the trees (lightly) with the Deluxe Flower Shaping tools. 

Cut apart the cardinal image as needed and adhere to card front as shown with Dries Clear Adhesive and pop dots. With Dries Clear Adhesive add Art Glitter Yuletide Dazzlers to the holly on the design paper, add Green Briar Glitter to the trees and Crystal Glitter to the cardinal. Using Dries White Adhesive add Rajni Chawla's Crystal Clear to create a snowy affect, as desired. Add Yellow Stickles to the cardinals beak and to the flame in the lantern. Adhere the Green and Red Rhinestones as shown.

Other Products: Hickory Smoke Distress ink, Black Archival ink, Gansai Tambi Watercolors, Koi Waterbrush, Ebosser, Martha Stewart scoreboard, white & watercolor cardstock, pearls & adhesive

For EZ tips to create your own warm and cozy winter scene click here.

For tips on how to cut intricate dies check out this tutorial.

Instructions: To see an up close photo of the colored scene inside click here.  Cut a 4 3/4" x 6 3/4" piece of pattern paper from Winter's Eve Paper Collection. Adhere it to a 5" x 7" white card base. Die cut a rectangle in the center of the card front using the middle die from Window Frame Die.

Stamp the fireplace image from Winter's Eve Stamp Set with black archival ink on a piece of watercolor cardstock & color it using Gansai Tambi Watercolors & Koi Waterbrush. Trim the edges around the image & adhere it to the inside of the card so that it is aligned with the  window on the card front.

Stamp the window from Window Frame Stamp Set with black archival ink on a piece of white cardstock & die cut it using matching dies from Window Frame Die. Ink it lightly with Hickory Smoke distress ink. Die cut 1 more piece of the window & adhere them together. Align it with the window opening on the card front & glue it down. 

Die cut two pieces of both decorative dies from Window Box Elements Die. Adhere the similar die cuts together to make a thicker piece. Take the die cut that will be on the sides of the window & cut it lengthwise. Adhere all 3 pieces as shown.

Die cut one more piece of the ornamental die that was used on the sides of the window & trim the sides to get the straight edges as shown. Fussy cut a piece of green patterned paper from Winter's Eve Paper Collection to layer behind the die cut piece. Cut the sentiment from the same paper collection & adhere it on a slightly larger piece of white cardstock. Adhere this to the die cut using foam adhesive. Adhere this piece to the card base below the window. Add some pearls to the die cuts for finishing touch.

Other Products: White cardstock, Spellbinder label, 3D snow pen, snowflake stickers, rope, Versafine black, Dutch Doobadoo card shape stencil, Markers, Vintage Photo Distress ink, 3D Foam strips

Instructions: Cut the card with the stencil out of white cardstock, fold all the score lines. Now you cut it two more times out of pattern paper without the score lines. Cut off the piece that you need for the background and front bottom. The other piece you can glue on the back but not on the folded parts. 

Fussy cut some scenery images out of the paper, ink with Bamboo Leaves ink and decorate them with 3D snow, glitter and frosting powder. Glue those on both sides where the card pops up.

Stamp the sled in black ink onto white cardstock and diecut with coordinating die. Color with markers and glue that next to the label. Adhere a piece of rope on top of the sled to the back. Stamp Holly & Berry (HCPC-3791) onto white cardstock and diecut. Color using the daubers along with Bamboo Leaves ink and Lady Bug ink. Shape using the Deluxe flower shaping kit and add Nuvo Red Berry drops on the berries.

Stamp sentiment on white cardstock and diecut using Spellbinder Label die. Ink the edges using dauber and Vintage Photo ink and adhere on card base using Foam strip.

Other Products: SVG cut file - Gift Boxes Kit (svgcuts.com), Woodgrain embossing folder, Mini Brick Stencil, Texture Paste, Bead Gel, twine,  X-Press It, Copic Markers (Floor - E30, E33, E35, E44,  Window - E40, E42, E44, Fireplace - C3, C4, C5, Wreath/floors - G40, G43, G45, R20, R24, Fire - Y11, YR23, YR26, Bricks - E00, E02, E04, E08, E11,  E19, Mantle/Logs - E30, E33 E35, Flowers BV00, Y11, R20, R24, R56), Pumice Stone Distress Ink

For EZ tips to create your own warm and cozy winter scene click here.

Instructions: Create gift box per instructions and video. The paper was selected from Winter's Eve Paper Collection svgcuts.cm. Stamp window, flowers and fireplace image using Memento Desert Sand Ink on X-Press It Blending Cardstock. Color the images with the following Copic Markers - (Floor - E30, E33, E35, E44,  Window - E40, E42, E44, Fireplace - C3, C4, C5, Wreath/floors - G40, G43, G45, R20, R24, Fire - Y11, YR23, YR26, Bricks - E00, E02, E04, E08, E11,  E19, Mantle/Logs - E30, E33 E35, Flowers BV00, Y11, R20, R24, R56). Die cut the window, flowers and window box with the coordinating die. Emboss the flower box with a wood grain embossing folder and sponge with Pumice Stone Distress Ink. Die cut 3 additional window frames and adhere with Designer Dries Clear Adhesive. This adds extra strength and dimension. Apply clear cardstock between the window frame and the fireplace scene and pop up the window frame with Darice foam strips. 

Adhere the window frame, window box and scene to the gift box.  Adhere the flowers and green leaves with Dries Clear Adhesive. Tie some twine or hemp around the lid of the box. Fill with candy or any gift that you would like to share with that special friend.

Other Products: 6 x 6" Card, Colouring Pencils, Green Cardstock, Forest Moss Distress ink, 3D Foam Pads 

Watch this tutorial for tips on using the Festive Holly collection here.

Instructions: Cut green cardstock to 6 x 6" and adhere onto card base. Find the coordinating 6 x 6" panel to match the tag as shown. Trim the 6 x 6" panel down By cutting off the outside rim of colour. Then ink your edges with Forest Moss Distress ink. Mat the tag onto green cardstock and adhere to card base using 3D foam pads. 

Choose sentiment from paper collections and fussy cut. Adhere onto card, as shown using dries clear glue and 3D foam pads.

Stamps Holly and Cardinals on white cardstock using black ink and die cut with coordinating die. Colour using colored pencils and mount this onto your card with 3D foam.

Other Products: White Cardstock, London Fog Memento Ink, Dimensional Tape, Seam Binding, White tag, Angel Pink Memento Ink

Instructions: My tag is  3 1/8 X 6 1/4". Cover the tag with a piece of the Flowering Dogwood paper collection.  Stamp the flowers with New Sprout Memento ink and die cut. Color using Memento Inks Angel Pink. Shape using the Deluxe Flower Shaping kit and add the Prills to the center using Dries Clear glue and set aside to dry.  

Stamp the leaves in Bamboo Leaves Memento In and then color using New Sprout Ink, shape and set aside.  Stamp the dove in black ink ad shade with London Fog ink then add glitter.  Set aside to dry.  Die cut the sentient using the Luggage and Tags die. Tie a piece of seam binding through it and use dimensional tape to adhere it to the tag.  Place the flowers, dove and leaves where you lke them and glue them down using Dries Clear Glue. Now tie a piece of seam binding through the hole in the top of the tag and it is ready to go.

Other Products: Cardstock (Brown, Kraft, Cream, Black), 1.5” Mesh Ribbon, Scrapbook Adhesives by 3L (Extreme Double Sided Tape 1/8”, E-Z Runner Grand, 3D Foam Squares, Kraft Mini Tag, Natural Burlap String

Instructions: To see a close up view of this layout click here. Cut the blue patterned background to 10.75 x 10.75". Cut the kraft cardstock to 11 x 11". Tear around the edges of a 12 x 12" sheet of cream cardstock. Using daubers, ink the edges of ALL of the paper pieces on the project with brown ink. Adhere these background layers together on a 12 x 12" brown cardstock.

Cut a strip of the striped patterned paper that is .75” wide and a piece of the kraft cardstock that is 1” wide. Add a piece of brown mesh ribbon up the middle of the layout using Extreme Double Sided Tape, add the layered border on top of that. 

Cut a piece of the light brown patterned paper that is 6 x 6" and adhere to the middle of the layout. Cut a strip of the black polka dot patterned paper that is 2 x 10.5" and adhere across the layout. 

Find and die cut out the large white tag and the small blue tag using Luggage and Tags dies. Add burlap string to the blue mini tag and the kraft tag you've fussy cut. Die cut one of the black medallion pieces from black cardstock. Snip off the end of this and add to the large white tag. Adhere these to the right of the brown 6 x 6" patterned paper.

Mat your 4 x 6" photo in black, cream, kraft and cream cardstock and adhere to the middle of the layout using 3D foam squares. Find and cut out the rounded corner journal block and mat it in the blue patterned paper. Adhere to the left hand side of the matted photo. Find and cut out the “We Will Always Remember” sentiment and mat in the smaller black polka dot patterned paper. Adhere this to the left hand side of the border near the bottom.