Instructions:

Fold white cardstock to 6 x 5.5" with fold on the top then use the outline die from the Simply Classic Oval Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the full front from the Floral Banners Paper Collection. Cut out 3 white doilies from the same die set. Cut out two ovals with the oval dies from the Floral Banners Paper Collection. Use dimensional adhesive and glue all elements.

Stamp blossoms from Large Wild Rose Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, color their centers and edges in the same color. Then diecut with coordinating die and shape with coordinating mold. Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies. Add stamens and some glitter to all flowers. Stamp flowers from Lush Lilac Cling Stamp Set in Buttercup and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating dies. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 6 branches from the Cottage Tree 'scapes Cling Stamp Set in Leaf Green ink, color them with the same ink and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal

Instructions:

Other Products: Smooth White Cardstock, Hot Glue, Satin Cord, Bundled Sage Distress Ink, Aquamarine Archival Ink

Instructions:

Fold white cardstock to 5 x 7.5" with fold on the top then use the outline die from the Fancy Classic Rectangle Frame Die to cut, leaving the top of the die over-hanging fold by about 1". Use the same die and cut out the diecut from the Floral Banners Paper Collection. Cut out 3 white doilies from the same die set. Cut out two rectangles from the Floral Banners Paper Collection. Use dimensional adhesive and glue all elements.

Stamp blossoms from Large Wild Rose Cling Stamp Set in Magenta Hue ink onto Deluxe Flower Shaping paper, color their centers and edges in the same colour. Then diecut with coordinating die and shape with coordinating mold. Stamp blossoms from Clematis Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, color them with Vibrant Fuchsia and Rose Bud inks and diecut with coordinating dies. Add stamens and some glitter to all flowers.

Stamp flowers from Lush Lilac Cling Stamp Set in Buttercup and Leaf Green inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping Kit tools. Put some prills in the center of the flowers. Stamp 2 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Stamp 8 branches from the Holly Berry Spray Cling Stamp Set in Leaf Green ink and diecut with coordinating die.

Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sissal

Instructions:

Other Products: Smooth White Cardstock, Hot Glue, Satin Cord, Aquamarine Archival Ink, Bundled Sage Distress Ink

Instructions:

Cut a piece of Deluxe Flower Shaping paper 10 1/2" x 7 1/2", score at 5 1/4" and fold. Die cut the shaped base using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set with one side slightly over the folded edge. Score halfway across one side of the card to create the easel component of the card. Cut a piece of white cardstock using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die out of white cardstock and adhere to the bottom half of the easel component. Die cut two pieces of light pattern paper using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set and adhere to the front of the card and to the base of the card. Trim the excess of the base of the card to enable the card to fold in half.

Die cut two decorative dies using the No. 2 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set – one out of silver cardstock and one out of white cardstock. Adhere the silver outer frame to the top of the white outer frame and adhere to the front of the card. Adhere the white inner die to the centre of the frame.

Die cut two middle frames using the No. 3 die from the HCD2-7384 Fancy Classic Rectangle Frame Die – one out of white cardstock and one from silver cardstock.  Adhere the silver die to the white die and adhere to the front of the card as shown.

Die cut two inner dies using the No. 4 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set – one out of white cardstock and one out of silver cardstock. Adhere the white die over the silver die slightly offsetting it and adhere to the middle of the frames. 

Die cut two inner decorative dies using the No. 5 die from the HCD2-7384 Fancy Classic Rectangle Frame Die – one out of white cardstock and one out of silver cardstock. Adhere the silver die cut to the white die cut and then adhere to the centre of the card as shown.

Repeat the same process for the base of the card.

Stamp the rose leaf images from the HCPC-3752 Classic Rose Cling Stamp set in Northern Pine ink on Deluxe Flower Shaping Paper. Colour the images with Garden Patina ink and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter with clear gloss gel medium. Trim and adhere around the left of the frames and to the bottom right of the base frames as shown.

To create the roses stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the flowers with Angel Pink ink and Magenta Hue in the centres of the flowers and die cut with the coordinating dies. Colour the backs of the flowers with Angel Pink ink and the edges front and back with Magenta Hue ink. Shape the petals using golf tools and assemble with hot glue. Add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves on the left on the front of the card and on the bottom right of the base of the card to create the ledge for the easel card.

For the small flowers stamp the little flower images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta ink on Deluxe Flower Shaping Paper. Colour the flowers with Angel Pink ink and the centres with Magenta Hue ink and die cut with the coordinating die. Colour the backs of the flowers and the edges front and back with Magenta Hue.  hape using the groove golf tool, pierce the centres, insert a magneta coloured bead stamen and secure with hot glue. Add Crystal Clear glitter using clear gloss gel medium, trim and add around the larger roses as shown.

Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiments Cling Stamp Set using embossing ink on vellum and heat emboss with silver embossing powder.  Die cut using the No. 6 die from the HCD1-7204 Arrows and Banner Die set and adhere to the centre of the dies on the top of the card as shown.

To finish, add iridescent gems to the banner and on the decorative dies as shown.

Other Products: Memento ink - Angel Pink, clear gloss gel medium, Hero Arts Embossing and Watermark ink, Ranger Silver Embossing Powder, iridescent gems, hot glue gun

Instructions:

The ready top fold card measures 8″ by 6″. To prepare the white card base, cut one piece measuring 8″ by 6″ and the second piece 8 1/2″ by 6″. Score the second piece at 1/2″ on the longer side and glue the first piece on top. For the topmost layer, choose the darker tone of grey cardstock paper and cut 7 1/4″ by 5 1/4″. Next, cut a light grey color card panel 1/16" smaller on all the sides. Dry emboss it through the embossing folder and layer it on the card front using foam tapes.

Cut the outer delicate frame one each from white and Luxe Gold cardstock using Simply Classic Rectangle Frame Die. Glue the white one behind the gold to add strength. Adhere the ready frame on the solid cover die-cut, cut using the same die from dark grey cardstock. Inlay the leftover white die cuts back into the frame for the extra accent. Cut the center solid label from light grey cardstock and dry emboss it using an embossing folder. Layer it as shown. Adhere the smaller white frame with an adhesive that dries clear.

For Blue Asters, stamp a couple of petals from Wild Aster Cling Stamp Set using French Ultramarine Archival Ink and cut them using its coordinating die. Color the petals using the same ink and shape them using golf groove tools. Create one large, 3 medium, and one small-sized Aster. Complete the flowers by adding the prills in the centers.

For foliage, stamp the images from Leafy Accent stamp set with Olive green archival ink and paint them using Leaf green Archival ink. Cut the foliage using its coordinating die. Shape the leaves using a groove golf tool.

Stamp the butterfly from Floral Butterfly Accents Cling Stamp Set on vellum using Hero Arts white pigment ink and heat emboss the butterfly using Floral Butterfly Accent stamp. Cut the butterfly using its coordinating die. Also, stamp a few florals from Lush Lilac on Vellum cardstock using Hero Arts white pigment ink, sprinkle white heat embossing powder, and dust extra. Next, heat set the images and cut them using its coordinating die. Color the florals using Mustard seed distress oxide.

Take a strip of cardstock and stamp the sentiment using Olive Green archival ink. Shape the stripe slightly and glue both ends using hot glue. Assemble small flower clusters around the sentiment strip and complete the card by adding sparkle to the flowers.

Other Products Used: Smooth white cardstock, Score Board, Die Cutting machine, Tacky glue, Glossy Accent, Foam Tape, Adhesive that dries clear, 2 shades of Smokey Grey cardstocks and Peeled paint and Mustard Seed Distress Oxide.

Instructions:

Prepare a 5 x 7” white card base with a piece of the Floral Banners paper, sheet 12B, trimmed down 1/4” smaller on top. Die cut the center of the 2nd largest die from Fancy Classic Rectangle Frame set in white and adhere to the card. Next, cut the 3rd die from the same set from the Floral banners paper add to the card, Die cut from white card stock the 4th die, stamp the sentiment using Vibrant Fuchsia ink in the center, add foam dots and adhere to card. Die cut four corners from Luxe Gold card stock using the Simply Classic Oval Frame Die and adhere to the corners of the card.

Stamp the Leafy Accents on white with Bamboo ink, cut out with the coordinating die, ink the edges with the same, only darker. Place in the matching mold and run through the die cut machine to shape, Adhere to card.

Stamp the Small Wild Roses on white with the Vibrant Fuchsia ink, cut out with the coordinating die, place in the matching mold, put 2 together making one flower, Add the Bridal Bouquet stamens and adhere to the card on top of the leaves.

To finish, add glitter to all the leaves and flowers.

Other Products: Paper Trimmer, Die Cut Machine, Hot Glue Gun

Instructions:

Card measures 5” x 7”. To create a card base - cut out 10” x 7” piece of white card, then score it at 5” (long side up). Fold using a bone folder along the score lines. Cut out a slightly smaller piece of HCDP1-2111 Cottage Garden Paper Collection, distress the edges with Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Daubers, then adhere it to the card front.

Die cut decorative frame from Navy Card using HCD2-7381 Fancy Classic Oval Frame Die, then adhere it to the card front as shown. Die cut oval from both White Card and HCDP1-2111 Cottage Garden Paper Collection, stack and adhere them together, then distress the edges with Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Daubers and adhere final piece it to the card front using 3D foam.

Stamp the large hydrangea flower from HCPC-3901 Fresh Cut Hydrangea Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Memento Dye Ink Pad - Paris Dusk, then colour it with Memento Dye Ink Pads - Paris Dusk and Bamboo Leaves. Die cut in with matching HCD1-7279 Fresh Cut Hydrangea, then using a sponge add Designer Dries Clear Adhesive, sprinkle it with Glitter and adhere into the card front using 3D foam.

Stamp hydrangea petals from HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set on Deluxe Flower Shaping Paper with TSMP608 Memento Dye Ink Pad - Paris Dusk, then colour it with the same ink using HCDA1-449 Daubers. Die cut it with the matching HCD1-7278 Cottage Garden Hydrangea Die, then place them in HCFB1-489 3D Hydrangea Shaping Mold, spray them with water and run them through a die cutting machine. Adhere hydrangea flowers to the card base using a hot glue gun.

As a final step, glitter the flower petals using a sponge and Dries Clear adhesive with a metal tipand add gems to the frame. 

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Bone folder, Hot glue gun, White Cardstock, Navy Cardstock, Glitter, Light Blue 3 mm gems

Instructions:

My finished size of my card is 5" x 7". Make card base and cover with a piece of Sheet 12B of the paper collection. Set aside while we work on the medallion.

Using the Simply Classic Oval Frame die, cut a gold piece using Luxe Gold Cardstock and a white piece using white cardstock. Glue the gold die cut behind the white die cut so the gold piece shows just a little bit. This makes a beautiful accent. Adhere this piece to the card front using dimensional tape. Cut an oval using a piece of Sheet 11B of the paper collection and glue to the base of the medallion. Next using white cardstock cut a small decorative piece and glue it to the medallion piece. Cut a piece of white cardstock 2 1/4" x 1 1/4" and round the corners with the Crop-a-Dile. Edge the piece with Magenta Hue ink. Cut a piece of Sheet 10-A of the paper collection 1" X 2" and round the corners of this as well. Edge the piece with Fern Green ink, glue it to the white piece of cardstock and then stamp the sentiment using Jet Black ink. I adhered this piece to the card front using dimensional tape.

Using a piece of the Luxe Gold Cardstock cut out the little corner pieces and glue in each of the four corners.

Stamp the flower petals in Magenta Hue ink and the leaves in Fern Green ink onto a piece of Deluxe Flower Shaping Paper. I used Leaf Green ink to color the leaves and edged them with Olive ink. Cut out using the coordinating dies. Cut out the flowers with coordinating dies and I colored the edges with Magenta Hue Ink. I used the Deluxe Flower Shaping Kit to shape the flowers and leaves. I layered three flower petals and glued with hot glue. I used Designer Dries Clear Adhesive and added Hot Mama Prills to the centers of the flowers and set aside to dry. Once the glue is dry, use a Hydra Sponge and add Dries Clear Adhesive to the petal edges and sprinkle glitter over them and allow to dry.

Once everything is dry, decide on placement and glue down. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock, Dimensional Tape, Crop-a-Dile Corner Chomper

Instructions:

Card measures 5” x 7”. To create a card base - cut out 10” x 7” piece of White card, , then score it at 5” (long side up). Fold using a bone folder along the score lines. Cut out a slightly smaller piece of HCDP1-2111 Cottage Garden Paper Collection and adhere it to the card front.

Die cut a large frame of HCGP1-493 Luxe Silver Cardstock using HCD2-7382 Simply Classic Oval Frame Die, then adhere it to the card as shown. Die cut decorative frames from both HCGP1-493 Luxe Silver Cardstock and HCPP1-438-2 Paper Pack of 10 - White, then stack and adhere them together to the card front using 3D foam pieces.

Stamp the window image from HCPC-3902 Cottage Window & Hydrangea Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Ranger Archival Ink Pad - Coffee, then colour it with Ranger Distress Ink Pad - Pumice Stone and Memento Dye Ink Pad - Paris Dusk using HCDA1-449 Daubers. Die cut it with matching HCD1-7280 Cottage Window & Hydrangea Die and adhere the final piece to the card front using 3D foam pieces.

Stamp the small hydrangeas from HCPC-3901 Fresh Cut Hydrangea Cling Stamp Set on CPP1-475 Deluxe Flower Shaping Paper with TSMP608 Memento Dye Ink Pad - Paris Dusk, then colour it with TSMP608 Memento Dye Ink Pads - Paris Dusk and Bamboo Leaves using HCDA1-449 Daubers. Die cut it with matching HCD1-7279 Fresh Cut Hydrangea Die, then shape them with HCST1-401 Deluxe Flower Shaping Kit. Using a sponge add Designer Dries Clear Adhesive to the leaves and flowers, sprinkle them with Glitter and adhere them to the card front using a Hot glue gun.

Stamp hydrangea petals from HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set on Deluxe Flower Shaping Paper with TSMP608 Memento Dye Ink Pad - Paris Dusk, then colour it with the same ink using HCDA1-449 Daubers. Die cut it with the matching HCD1-7278 Cottage Garden Hydrangea Die, then place them in HCFB1-489 3D Hydrangea Shaping Mold, spray them with water and run them through a die cutting machine. Adhere hydrangea flowers to the card base using a hot glue gun, then decorate each centre of the flower with prills using Dries Clear Adhesives with metal tip.

As a final step, decorate card front with large white pearls.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Bone folder, Hot glue gun, White Cardstock, Large White Pearls, Glitter, Ranger Distress Ink Pad - Pumice Stone

Instructions:

This tent fold card measures 8 1/4“ x 5 3/4“ when completed.

Taking the white card stock to make the card base to the above measurements. Using the Vibrant Fuchsia  ink and a dauber, ink the edges of the card front base. Taking a piece of white card stock cut a matting a little smaller than the card base.  Adhere this to the card front with 3D foam tape or foam dots.

Find the design paper used for this card in the paper pad collection. Sheet 12B. Cut this also a little smaller than the new card front. Using the gold card stock and the corners found in the Simply Classic Oval Frame die set and die cut the four corners. Adhere these to the corners of the design paper then adhere this to the card front.

Using again the Simply Classic Oval Frame die set, the oval die, the design paper and the white card stock, die cut an oval shape from each then adhere them together. Now die cut the rest of the gold card stock elements used from this die set, the fancy oval and five leaf shapes. Also die cut from the gold card stock the Letters & Numbers die set, the words Thank You once each in the larger letter font. Die cut four layers for each letter in the white card stock. Adhere all together using the quick stick and the clear drying adhesive. Adhere the gold fancy oval frame to the design paper oval. Adhere this to the card front with 3D foam dots.

Using the white card stock, the sepia ink and the Vining Clematis Banner stamp and matching die, to make the banner. Use the water color brush, the Elderberry, Parakeet, Banan, and Pesto Green aqua pencils to color the banner. Using the deluxe shaping tools, bring shape to the vines and flowers. Make a curl in the banner by rolling this across your fingers, adhere the banner in place by using the foam dots in the banner centre and securing it at the ends to the oval with clear drying adhesive. Hold in place until the adhesive is dry.

Make the Clematis flowers by: Stamping, coloring and die cutting: three large petals and two smaller petals. Bring shape to the petals by using the collection 3D shaping mold. Use the pricking tool from the flower shaping set and make a hole in the petal centre, big enough to be able to get three folded stamens through it. Adhere in place by using the hot glue gun. When the hot glue is dry, trim off the excess stamen stems ready to use.

Adhere the clematises in place at each end of the banner. Cut in half the gold leaf shapes and adhere behind the flowers in pairs. Adhere with the hot glue gun. Adhere the sentiment to the banner by using the clear drying adhesive and the quick stick tool.

Other Products: Ink: Spectrum Nior Aqua Pencils: Elderberry, Parkeet, Pesto Green, Banan, Pesto Green. Other: Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun,

Instructions:

Card size is 5 x 7”. Score and fold 10 x 7” Champagne Cream Metallic cardstock at 5” on the long side. Cut Luxe Gold Cardstock 4 7/8 x 6 7/8” 2x, adhere one on the inside of the card and the other on the card front. Cut fuchsia paper from the Floral Shoppe Paper Collection, sheet 11B 4 3/4 x 6 3/4, ink the edges using Light House ink, and adhere to card front. Cut Luxe Gold Cardstock 4 5/8 x 6 5/8” and blue designer paper, sheet 1B, 4 1/2 x 6 1/2”, ink the edges using Seafarer ink, and adhere to card front. Cut sheet 1B, 4 3/4 x 6 3/4”, ink the edges and adhere to the inside of card. Stamp sentiment ‘Hope your day is as Special as you are’ on the inside using Archival Light House ink.

Using third and fourth largest Simply Classic Oval Frame Dies, cut from Luxe Gold cardstock and Champagne Cream Cardstock, adhere together, slightly offset, using dries clear adhesive and adhere to card front. Using the fifth largest die, cut from Luxe Gold and cream cardstock and from the 6 x 6” panel from sheet 10A from the paper collection. Ink the edges of the designer paper using seafarer ink, stamp the ‘just for you’ sentiment using Light House ink and adhere to cream cardstock. Adhere that to the Luxe Gold, slightly offset, and then adhere to the card front using dimensionals. Diecut the second smallest die from champagne metallic and Luxe Gold cardstocks, adhere together, slightly offset, and adhere to the card front.

Diecut the corners 2x From Luxe Gold using the Simply Classic Oval Frame Die and adhere to the corners of the card front. Diecut the other small dies that look a little like pine needles 2x from the Luxe Gold and put aside.

Stamp the Small Wild Roses on champagne metallic cardstock using VersaMark, cover with Aged Ivory embossing powder and heat set using the Heat It Tool. Diecut using the coordinating dies. Color some front and back using Seafarer ink, color some using Light House ink and leave some uncolored. Shape stamped side down in the 3D Small Wild Rose Mold. For the larger flower, layer three together, slightly offset. For the next size flower use two layers and for the smallest flowers use a single layer, pierce the centers using the Groove Golf Tool and insert the assorted bead stamens - medium.

Stamp the Leafy Accents leaves on Deluxe Flower Shaping Paper using Archival Olive ink. Color using Vivid Chartreuse and Olive inks. Diecut using the coordinating dies, add Olive ink to the edges and shape in the Leafy Accents Mold.

Adhere the flowers, leaves and gold diecuts to the card front as shown. Sponge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Sponge the card front and inside randomly with dries clear adhesive and sprinkle with crystal clear transparent glitter.

Other Products: Champagne Cream Metallic Cardstock, VersaMark, Misti, Funnel Tray

Instructions:

Card size: 5 x 6 3/4". Make a shaped card by folding a piece of white cardstock to make a 5 1/4” x 7” card. Place the outer die of the Simply Classic Die over the fold by about 1/4", cut. Cut another front from White and glue to card front matching bottom and sides. Place the outer die and the next die in the set onto light pinkish decorative paper and cut. Use the frame on the outer edge, use the inside to cut a small decorative border for later. On light blueish color decorative paper, place the large decorative part of the die set and in the center the small decorative border (for later as well). Make a slightly smaller large oval (with scissors) to line the back of the large decorative die (just the oval part). Glue the pink lined blue cut out onto card front matching cut lines of the outer die cut border.

From white, cut the plain oval from the set and a foam sheet piece to match then glue them together and glue to center of card front. Off-set pink and blue small decorative ovals as you glue them around the plain white oval. Stamp Happy Birthday using Rose Madder on white then die cut with 1 1/4" wide small oval from Eyelet Ovals and Basics. Cut a piece of foam sheet to match, glue together then glue it to the center of the card front.

Use pearl strips to go around 2 ovals on blue large die cut.

Using Deluxe Flower Shaping Cardstock, stamp Wild Roses Small using Rose Matter, sponge with Pink Peony, die cut then shape in the mold. Use the Deluxe Flower Shaping kit to form centers. Glue multiple layers together using 2-3 sizes on each. Insert 1 blue Bead Stamen and several small white pearl stamen into each flower except bud. For bud use a white or blue bead stamen then shape the center petals around it stamped side out. Make 2 more layers stamp side up. Cut wire short, glitter flowers with Crystal Clear.

Stamp leaves using Garden Patina, sponge lightly with Sky Blue, die cut and then shape in the mold. Add a layer of lacquer to the tops of leaves.

Stamp little birds, die cut then color and round backs a little bit with the Deluxe Flower Shaping Kit. Add foam dots to the back of each bird.

Arrange flowers and leaves onto both the bottom left and the bottom right of card front, let the leaves or flowers hang over bottom edge just enough for the card to display standing straight up (it makes a balance). Add the little birds into arrangement then glitter the card front using Ultrafine.

Other Products: White cardstock, pearls, foam sheet, London Fog Memento Ink, Copic Markers: B00, B01, B02, E50, RV10, RV00, Y21

Instructions:

Card size: 5 x 6 7/8”. Make a shaped card with the outer die of the Fancy Classic Rectangle Frames set by placing the die over-lapping the fold by about 1/8”. Cut another front from pale pink then glue it to the shaped card matching bottom and sides. Use the large decorative rectangle die in the set to cut plaid decorative paper and silver Luxe cardstock. Off-set them slightly and glue to card front. Cut the next 3 dies in out of silver luxe and decorative paper (the larger is from plaid again, then pale pink cardstock and the blue color decorative paper last). For the top oval layer, stamp the sentiment using embossing ink then emboss with silver powder on pale pink decorative paper. Cut the sentiment out using an oval die also cut a silver luxe oval. Off-set each layer with its silver layer then glue to card front, largest to smallest with sentiment last. Pop up each solid layer using foam sheet or pop-up dots.

Using Deluxe Flower Shaping Cardstock, stamp The Classic Rose and just the butterfly from the Sunflower Banner using Magenta Hue, sponge with Pink Peony and small amount of Garden Patina, die cut and shape roses in the mold. Stamp Leaves from the Classic Rose using Fern Green, sponge with Leaf Green, die cut and shape in the mold. Finish shaping roses using the Deluxe Flower Shaping Kit. The center petals are made tightly squeezed together stamp side out by pushing down in the center of non-stamped side. The rest of the various sized petals are stamp side up when making centers (See video). Glitter the flowers with Crystal Clear and lacquer the leaves.

Bend the butterfly at the body, glue the body and pop-up the wings on right side of sentiment oval. Arrange roses and leaves around the left side of card front.

Glitter the card slightly trying not to get glue on any silver cardstock. Use Stickles in a thin layer on the butterfly wings.

Other Products: White cardstock, light pink cardstock, foam sheets, silver embossing powder, VersaMark ink pad, Stickles (butterfly wing), E35 Copic Marker (butterfly body).

Instructions:

Cut a white paper base from the largest die from the Simply Classic Oval Die set, then use the same die to cut the frame from the paper collection and glue it to the base.

From the white paper, cut the second frame from the same set, and from the paper collection, cut the third frame in the sequence. Then cut out another frame from white paper and another frame from your paper collection. On the last frame, stamp the sentiment from the Just for You Sentiments set in black ink and cut the next smaller frame out of white paper. Glue all the frames in the order shown.

To create rose shaped flowers, stamp the Small Wild Rose on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Rose Madder then shadow with the same ink and die cut using the coordinating die. Form with coordinating mold. Put glue and Pastel Bead Stamens Medium in the center.

To create leaves, stamp the Leafy Accents Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Leaf Green, die cut with the coordinating die, shade using this same ink and the tips of the leaves in pink ink . Shape leaves using 3D Leafy Accents Shaping Mold.

Arrange everything as pictured. Finally, add ribbon, cover with glue and glitter.

Other Products: Ribbon, die cutting machine,

Instructions:

The finished card is a shaped card measuring 4 1/2" x 7". Using white cardstock make a shaped base card using the dies from the Fancy Classic Oval Frames set. Cut another piece of white cardstock to cover the shaped base. Cut a piece of Sheet 6B of the paper collection and cover the card front. I used white cardstock and a smaller die from the set to make the medallion. Also cut a piece of Sheet 11B then clue the two die cuts with the turquoise showing a bit under the white piece. Glue down to the card front. I used the next smallest oval die and cut out another piece of Sheet 11B and glued it to the medallion piece.

Stamp the sentiment onto a piece of 4A using Jet Black ink. Use the tag die from Cut Mat Create set and cut out the sentiment. Also cut a piece of white cardstock and glue the sentiment piece to this. It just gives the sentiment a bit of stability. Use Double Dots to adhere to the card front.

Stamp the flower petals using Magenta Hue ink and cut out using the coordinating dies. Stamp the leaves using Fern Green ink and cut these out using coordinating dies. I used the stack and store daubers to color the leaves with Leaf Green ink and then edge with Olive ink. Color the flower petals with Magenta Hue ink. Lay the flower petals and the leaves onto the shaping mold and sprintz with water then run through the die cut machine. Turn everything out onto the desk to dry. Once dry use a hydra sponge and Dries Clear Adhesive to add glitter to the flowers and leaves. Also at this point add the prills by adding a puddle of dries clear adhesive to the center and then dumping prills over. Allow to dry.

Once everything dries, decide on placement and use hot glue to glue to card front. The card is finished.

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock, Dimensional Tape

Instructions:

Create a 6 by 7" card base and mat with pattern papers from the floral banners paper collection. Cut an oval window on the card front uing the oval die from the fancy classic oval frame die set. Adhere acetate on the back side of the oval window.

Cut the decorative elements from the fancy classic oval frame die set using pattern papers and luxe silver cardstock.  Adhere the decorative frame on the card base around the oval window. And glue the silver decorative center on top of the acetate window.

Stamp the flowers from the small wild rose stamp set on vellum and heat emboss in white. Color the flower petals using distress oxide in shade Victorian velvet. Color the small petals using versamagic turquoise gem. Stamp the leaves from the leafy accents stamp set using archival fern green and color using memento bamboo leaves. Cut and shape the flowers and leaves using their coordinating dies and 3D shaping molds. Add the pastel pearl stamens to the centers of the big flowers. Add tiny crystal stones on the center of the tiny flower petals.

Arrange everything as shown and lastly, dust the flowers with some glitter.

Other Products: White embossing powder, distress oxide Victorian velvet, versamagic turquoise gem, crystal stones, acetate.

Instructions:

The ready top fold card measures 5 7/16". To prepare the white card base, cut cardstock 7 3/4 x 10 7/8", score and fold at 5 7/16".  For next layer cut Luxe Gold cardstock 7 7/16 x 5 1/16", choose the pattern paper from the paper collection and cut 7 5/16″ by 4 15/16″ and dry emboss it through embossing folder. Layer it on the card front as shown.

Cut all the required die cuts using Fancy Classic Oval Frame Die from smooth white, smokey grey, and Luxe gold cardstock. Adhere extra white die-cut to all the delicate die cuts to add some extra strength and dimensions. Layer bottom two die-cut layers on the card panel and run a satin ribbon. Secure it from the back using hot glue. Build more layers of the die cuts as shown.

Stamp the image from the Elegant Rose Banner Cling Stamp Set on white cardstock using black archival ink and paint the image using Zig Clean Clear Brush Markers. Die-cut the image using its coordinating die. Chop the painted floral banner from the center and glue one each on the top and the bottom of the center gold oval die cut.

Using Celebrate Love Sentiments Cling Stamp Set, stamp the sentiment with white pigment ink on vellum cardstock and sprinkle white heat embossing powder. Dust extras and heat set it using a heat gun. Add a strip of Luxe Gold cardstock creating a delicate border of 1/16th" around.

Stamp a couple of smaller floral images from Small Wild Rose. Next, heat set the images and cut them using their coordinating dies. Color the Roses using Worn Lipstick distress oxide ink. Shape the roses in their coordinating mold and flower shaping kit. Add prills to the flower centers.

Stamp the florals from Lush Lilac on Vellum cardstock using Hero Arts white pigment ink, sprinkle white heat embossing powder, and dust extra. Next, heat set the images and cut them using its coordinating die.Color the Lush Lilacs using Rusty Hinge and shape them using a needle tool. Add flower centers using a glossy accent.

Stamp Leafy foliage from Leafy Accent stamp set with Olive green on flower-making cardstock and cut them using its coordinating die set. Paint the leaves using Leaf Green Archival ink and shape them using golf groove tools.

Once all the elements are ready, assemble small clusters of flowers as shown and finish the card by adding sparkles.

Other Products: Smooth white cardstock, Score Board, Die Cutting machine, Tacky glue, Glossy Accent, Foam Tape, Adhesive that dries clear, Smokey Greycardstock, Satin Ribbon.

Instructions:

It's a ready folding card size 9 inches by 5 1/2 inches, trim the paper slightly smaller from card base from magnolia paper collection sheet number 5B and adhere onto the card base using clear glue.

Place third frame and smallest die on to the purple card and die cut 2 frames, adhere together using clear glue, cut apart and set a side.

Cut a panel on deluxe card measuring 5 5/8 by 4 3/8", cut a panel from sheet 1A and adhere on to the white panel using clear glue. Add last purple frames from back top and bottom of this panel and adhere this panel on the card base using dimensional tape.

Die cut last two smallest die on purple cardstock and die cut shadow die on sheet 2B from magnolia paper collection adhere both together using clear glue add this oval frame on the center as shown using dimensional tape.

Stamp the banner from Vining Clematis Banner stamp set in Olive ink on pattern paper from paper collection and diecut with coordinating die, die cut banner Shadow die on deluxe card, adhere both together using clear glue, stamp sentiment in Magenta Hue ink in the center from Birthday Sentiment Stamp Set add this banner on the center as shown using dimensional tape.

Stamp the leafy accents with olive green ink on deluxe card die cut with coordinating die color with mowed lawn and olive green ink with dauber shape it in mold and cover with magic glitter.

Die cut branch on deluxe card from cut mat create die, color it with mowed lawn and olive green ink, shape it with shaping kit and cover with magic glitter.

For the flowers stamp all the flower sizes with versamark ink on Vellum paper, cover with Raspberry Tinsel Embossing Powder and small flowers with white embossing powder. Heat it using heat tool, die cut with coordinating die. Shape it with shaping kit and make few flowers, add clear glue in the center and sprinkle mini prills. cover with Nida Tanweer Magic Glitter Powder.

Arrange ready elements as shown using hot glue, embellish the card with white mini prills, pearls and nuvo drops.

Other Products: Die cutting machine, Purple Cardstock, Raspberry Tinsel Embossing Powder, Nida Tanweer Magic Glitter Powder, Vellum Paper, Versamark Embossing Ink, Pearls, Nuvo Drops, Art Pebbles, Hot Glue Gun, Mowed Lawn Distress Ink,

Instructions:

Make a card base from white card stock. Cut white card stock 7 1/2" x  11” and score on the 5 1/2" mark on the longer side. Fold to make a top fold horizontal card. Cut pattern paper with checkered background design from the paper collection, a little smaller than the card base, leaving 1/8” border all around. Adhere on the card front with clear glue. Cut the Fancy Oval Frame die cut in white card stack two times with Deluxe flower shaping paper. Color the die cut with Distress inks using sponge daubers. Leave the outer thin white frame white. Adhere all the die cut pieces on the card front.

Stamp the Elegant Rose banner image on Deluxe flower shaping paper with Jet black ink and color with pink and olive green Zig real brush pens. Cut with matching die. Adhere the floral banner image on the die cut pieces very beautifully with foam dots.

Stamp the leafy accents image 6-7 times with Leaf green ink on the Deluxe flower shaping paper. Color with the green Archival inks and cut with the matching die. Shape these leaves on the 3D leafy accent shaping mold.

Stamp the smallest flower from the Classic Rose stamp set with leaf green ink on the deluxe flower shaping paper. Cut with matching die and shape these flowers in the 3D Rose shaping mold. Add a white stamen in the center from the Bridal bouquet collection.

Arrange the flowers and leaves on the card using Clear glue.

Stamp the sentiment with Jet Black ink on a strip of white paper and add to card. Stamp the butterflies from Peony & Sunflower banner on Deluxe flower shaping paper with Jet black ink, die cut, color with pink Zig real brush pens and add to card.

Other Products: die cutting machine, scoring board, white card stock, Distress ink -Peeled Paint, Rustic Impression

Instructions:

Cut a 7” x 5” pink paper from the collection and adhere to the white 7" x 5" card base to create a tent fold card.

Die cut the 2nd largest Soimply Classic Oval Frame Die using the same pink paper, layer this onto a green die cut of the largest frame and adhere to the centre of the card base.

Die cut a green and white oval using the largest plain die. Die cut the chevron oval into the green die cut and layer the white and green together. Adhere to the card base using foam pads.

Die cut the second smallest decorative die from pink paper and from silver luxe card. Adhere the outer silver luxe frame to the card base and secure the pink “waste” into the centre of the silver frame. Die cut the ironworks sentiment in silver luxe card, trim and adhere to the centre of the pink.

Stamp the foliage using northern pine ink onto the paper, diecut and gently shape. Arrange into position at the top of the card as shown, using hot glue or dries clear adhesive.

Stamp 2 large roses and 1 medium using toffee crunch ink. Diecut and add vibrant fuchsia to the outer edges, shape using the flower shaping tools and thread through 10 stamen – secure firmly with hot glue. Add glue using a hydrasponge and sprinkle over glitter. Cut off the excess threads and secure top centre of the card using hot glue.

Die cut 4 of the corners using silver luxe card and secure into position using dries clear adhesive.

Other Products: Foam pads, hot glue, 5"x7" white card base

Instructions:

You can see a video tutorial of this card here. Score a 12" x 6" piece of Deluxe Flower shaping paper at 6" and fold it to create a 6" x 6" card base. Emboss the front of the cardbase using Diesire Embossalicious Embossing folder Regency Swirls embossing folder. 

Die cut 2 pieces of watercolor cardstock using the smallest die from Simply Classic Oval Frame Die and color them using Craftangles Poison Ivy liquid Watercolor. Cut 1 piece in half and adhere them on the bottem edge of the card front as shown to create a border.

Die cut a piece of watercolor cardstock using the 2nd smallest die from the same set and color it using Craftangles Poison Ivy liquid Watercolor and DOMS Brush Pens using Koi waterbrush. Die cut the white oval base using the oval die from the same set. Stamp the sentiment from Celebrate Love Sentiments Cling Stamp Set in the center of this die cut using Forget-Me-Not and Maganese Blue Archival inks. Adhere it on the card base as shown. Adhere the colored die cut on this piece to frame the sentiment.

Die cut 2 pieces of white cardstock using the dies from the same set and adhere them together. Adhere the resulting piece on the oval frame using double sided foam tape. Glue some pearls and rhinestones to the die cuts to add finishing touch.

Other Products: Craftangles Poison Ivy liquid Watercolor, DOMS Brush Pens, Koi waterbrush, watercolor cardstock, Double sided foam tape, pearls, rhinestones and Diesire Embossalicious Embossing folder Regency Swirls embossing folder.

Instructions:

From the Deluxe Flower Shaping Paper Pack of 50 - White, cut out the opening base, use the outer frame from the HCD2-7382 Simply Classic Oval Frame Die kit. Same frame but single cut from pale blue 8B Floral Banners Paper Collection. Glue to the base. Cut the next frame in the white cardstock. Glue on the previous frames. From pale blue sheet and silver cardstock, cut out oval frames. Use the oval part from the Simply Classic Oval Frame Die set and the oval part from the HCD2-7381 Fancy Classic Oval Frame Die set. Glue on the previous ones as shown.

On a white cardstock stamp the image from the HCPC-3969 Vining Clematis Banner Cling Stamp Set. Use black ink - Jet Black. Also stamp hearts from the HCPC-3965 Summer Wreath Accents Cling Stamp Set on the cardboard. Cut with matching dies. Color with felt-tip pens or markers using shades of pink, yellow, green and red. Tape the floral banner with 3D foam strips and place it in the center of the frame as shown.

Stamo the sentiment from the Special Birthday Sentiments HCPC-3843 set on the white cardstock. Use Vivid Chartreuse color. Cut out with a banner from the Arrows and Banner HCD1-7204 set. Using the 3D foam strips, place the sentiment in a specially designated space on the image with the clematis. Place the heart in the designated place using a small amount of glue.

Finally, add the white Nuvo droplets as shown, wait for them to dry and ready to go!

Other Products: cutting machine, trimmer paper, felt-tip pens or markers

Instructions:

Die-cut Simply Classic Rectangle in white cardstock 2x, line one side on both with Floral Banners Paper Collection 12B. On one of the rectangles add Floral Banners Paper Collection 3B to the blank side. Die-cut Album Tag and Accents in white cardstock and cover with matching 12B edge all with Vibrant Fuchsia.

Score a horizontal line across the top of tag approximately 1”, adhere this part of the tag to the back of the double-sided rectangle, this will act as the photo-frames stand.

On the single sided rectangle, die-cut an aperture using the Simply Classic Rectangle. From the back side, cover the aperture with clear cardstock using double sided tape.

Die-cut the decorative small and large Simply Classic Rectangle in Luxe Silver Cardstock adhere to the frame and clear cardstock.

Stamp in Vibrant Fuchsia the sentiment ‘To the world you may be one person but to me you are the world’ from For My Friend Sentiments, die-cut with Simply Classic Rectangle and edge in Vibrant Fuchsia.

Mount the aperture piece onto the photo-frame using dots and adhere the sentiment to line up inside the Luxe Silver decorative frame.

Stamp Leafy Accents in Fern Green onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and Leaf Green. Die-cut and colour the backs and edge with Leaf Green. Run through the die-cutting machine in the 3D Leafy Accents Shaping Mold.

Stamp the leaves from Clematis in Library Green onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and Leaf Green, die-cut and colour the backs.

Stamp Clematis flowers in Deep Purple and Cactus Flower onto Deluxe Flower Shaping Paper, colour the backs in the matching colours. Use a water pen and Zig Clean Color Real Brush Markers to add more colour to the centres of the petals. Run leaves and petals through the die-cutting machine in the 3D Clematis Shaping Mold. Pierce the centres of the petals and thread Small Rock Candy Stamens securing at the back with hot glue, cut off excess.

Stamp Clematis Spray in versafine onyx onto white cardsock and clear heat emboss, colour with Zig Clean Color Real Brush Markers and die-cut.

Adhere die-cuts, flowers and leaves onto the frame using hot glue, add Dries Clear and Crystal Clear to add sparkle.

Other Products: Paper trimmer, hot glue, double sided tape, versafine, clear heat emboss powder

Instructions:

Cut to fit front and inside of a 5 x 7” card blank in Cascading Petals Paper Collection 3B, mat Cascading petals 8B onto the front of the card edge all in Deep Purple.

Die-cut Cascading Petals Paper Collection 3A and 1 white cardstock using Simply Classic Oval Frame Die, adhere together and edge in Deep Purple.

Die-cut Simply Classic Oval Frame Die outer decorative in Luxe Gold Cardstock and the smaller decorative in Luxe Silver cardstock, adhere over stacked white cardstock of the same for dimension. Adhere both decorative ovals onto the Cascading Petals mat and adhere to the front of the card on dots.

Mat and layer Luxe Gold and Luxe Silver Cardstock Simply Classic Oval Frame and adhere inside the card. Stamp onto white cardstock in Deep Purple sentiment ‘just for you’ from Just for You Sentiments, die-cut Simply Classic Oval Frame and inlay to gold decorative, secure with dots behind the join and adhere inside the card.

Stamp onto Deluxe Flower Shaping Paper Wisteria Petals in Deep Purple. Colour with Viridian, die-cut and edge in Cactus Flower and Deep Purple. Shape with Deluxe Flower Shaping Kit and thread onto wired Assorted Bead Stamens Medium securing with hot glue. Use some Wisteria Petals as individual flowers threaded with the same stamens, add Dries Clear adhesive and Crystal Clear glitter to the petals.

Stamp onto white cardstock using versamark and silver heat emboss Cascading Wisteria, colour with Zig Clean Color Real Brush Markers and die-cut. Shape with Deluxe Flower Shaping Kit prior to adhering flowers and leaves onto the Simply Classic Oval Frame using hot glue.

Die-cut 4 corners in Luxe Gold Cardstock from Simply Classic Oval Frame Die Set and adhere to the card.

Other Products: Paper trimmer, hot glue, versamark, silver emboss powder

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die cut two pieces from white cardstock, glue it together on the top, using frame die cut from silver paper and place into card using Foam Strips for dimension. Cut smaller frame from paper collection and stamp the sentiment with Ranger Archival Ink Pad - Jet Black using Special Birthday Sentiments Stamp and place onto the card using adhesive foam strips. Cut out the smaller frame from silver paper and place on the top of card using adhesive foam strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

Create base using outside die cut of Simply Classic Rectangle Frame Die. Cut two pieces from white cardstock, glue it together on the top, using frame die. Cut from silver paper and place onto card using Foam Strips for dimension. Cut smaller frame from paper collection and stamp sentiment using Special Birthday Sentiments stamp with Ranger Archival Ink Pad - Jet Black. Cut out the smaller frame from silver paper and place on the top of card using dries clear adhesive. 

Stamp Vining Clematis Banner Cling Stamp Set on the piece of white paper with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the Leafy Accents Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine

Instructions:

The finished card measure 5 x 7. Take a 10 x 7" white base and fold it in half to make a top fold card. Place die from die HCD2-7383  about 1/2" up past fold so that fold does not get cut. Use the same die again on a piece of paper #6A from the Floral Banner Collection. Ink the edge with Coastal Coral ink and glue it to the folded card matching bottom and side edges. Cut the decorative part of the outside die out of  Luxe Gold. Glue it to the card front.

Cut in the same pink paper a rectangle with the third larger die.  Ink the edge and glue it with 3D foam on the base. Cut the decorative part of this smaller dies out of gold paper and clue it on the base too. Cut the word LOVE with the die Letters and Numbers in a patter paper. Glue it in the middle of the card and add 3D Crystal lacquer on it to give dimension.

Stamp your Climbing Clematis flowers with Coastal Coral and Viridian ink onto white flower shaping paper, color the centre and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and stamens. Made 1 big viridian flower and 3 little Coastal coral. Add gold shimmer with the nuvo pen on the edge of the flowers.

Stamp fill in elements from Wild aster and Hollyberry Spray stamp with Olive ink.  Die cut with the appropriate die and color it with stampin’ write melon sorbet marker. Make an arrangement on the left of your card and glue your flowers over it. 

For the final touch, add a bow, ribbon and stamen through your bouquet.

Other Products: Diecutting machine, water mister, scissors, hot glue gun, ribbon, stampin’write melon sorbet, nuvo pen aqua shimmer,

Instructions:

Create a 5 x 7" card base with white cardstock. Cut a 4.75 x 6.75" piece of peach designer paper from the Floral Banners Paper Collection, distress with Coastal Coral and adhere to card front.

Cut the largest die in the Fancy Classic Oval Frame Die in vellum and adhere, cut the next largest die in teal designer paper and adhere, cut the next decorative die in white cardstock and adhere, cut the center die in light blue designer paper and use the oval die from the die set to cut out a vellum piece. Adhere the vellum behind the center decorative oval and adhere to card with adhesive foam.

Stamp the sentiment from the Thank You Sentiments Cling Stamp Set in black and cut out with the tag from the Album Tags and Accents Die, distress with Coastal Coral and color hearts with Zig marker.

Stamp the Classic Rose Cling Stamp Set in Coastal Coral, cut out with coordinating dies and sponge with Buttercup and Coastal Coral, sculpt with the 3D Rose Shaping Mold and add stamens (to the small flowers) and glitter.

Stamp the leaves from the Classic Rose Cling Stamp Set in Fern Green, sponge with same and cut out with coordinating dies, sculpt with the 3D Rose Shaping Mold.

Arrange and adhere flowers, leaves and tag, as shown in photo.

Other Products: White cardstock, adhesive backed foam

Instructions:

Die cut the largest Fancy Classic Rectangle Frame Die from light green patterned paper, the next from white cardstock, then the next from light orange patterned paper, the next from white cardstock and finally the next from brown cardstock.

Adhere the 2 largest layers to a white cardstock 5 x 7" card base. Then add the orange patterned layer using foam tape. Add the next two layers to the middle of the card.

Stamp and die cut 2 of the sunflower banner images using brown ink (Staz On- Timber Brown) onto white cardstock. Add color to the flowers using yellow ink (Distress Oxide- Fossilized Amber) and daubers. Add color to the middle of the flowers using brown ink (Distress Oxide- Vintage Photo). I also added a darker yellow ink (Stampin Up- Delightful Dijon) to the petals using a waterbrush. Add color to the leaves using green ink (Distress Ink- Peeled Paint) and daubers.

Stamp the Happy Birthday sentiment using brown ink, in the middle of one of the sunflower banners. Fussy cut out just the flowers from the other set and add to the sentiment stamped set using foam squares. Adhere to the middle of the card using foam squares.

Stamp and die cut the Rustic Sunflower small flowers onto Deluxe Flower Shaping Paper using brown ink (Staz On- Timber Brown). Add color to the flowers using 2 tones of yellow ink (Stampin Up- Delightful Dijon, Distress Oxide- Fossilized Amber) and daubers. Shape the flowers using the coordinating 3D Shaping Mold. Assemble the flowers and then add brown Prills to the middle of each using liquid adhesive. Let dry.

Add a flower to either side of the sunflower banner. Add brown pearls around the die cut card.

Other Products: Distress Oxide Ink (Vintage Photo, Fossilized Amber), Distress Ink- Peeled Paint, Brown Pearls, Waterbrush, Cardstock (White, Brown), Scrapbook Adhesives by 3L (Crafty Foam Tape, Adhesive Dots Micro, E-Z Runner Ultra, 3D Foam Squares, Dual Tip Glue Pen)

Instructions:

Card size is 9 inches by 5 7/8 inches. It is a ready folding card, cut a panel on Deluxe Flower Shaping card measuring 8 3/4 by 5 5/8", adhere it on card base using dimensional tape. Trim another panel on deluxe paper adhere on to the card base using dimensional tape.

For the shaker frame, die cut the second die from Simply Classic Oval Frame die set on deluxe paper, place die size 3, 4 and 5 on deluxe paper all together and die cut the frames 2x and adhere both together for the sturdiness using clear glue. Apply clear glue on the frame with brush and cover with magic glitter powder, remove die size 4 and die cut again and make oval frame, adhere this frame under the last frame border using clear glue. Using die size number 3 and die cut oval on clear card and paste from the back side of the frame using clear glue and make window, adhere foam strips from the back side of the frame edges , put all shaker elements on the first die cut frame and place the ready window on it to complete the shaker window. Add this shaker frame on the card center using dimensional tape. 

Die cut the corners 12x and adhere 3 corners together using clear glue, cover with magic glitter and add on the each corner on the card with clear glue.

For the sunflowers, stamp all the flower sizes with versamark ink on Vellum paper cover with Copper Tinsel Embossing Powder Heat it using heat tool, die cut with coordinating die, color the flowers from the back with Curved Pumpkin and Squeezed Lemonade Ink using daubers, shape it with shaping kit and make a few flowers. Add clear glue in the center and sprinkle mini prills.

Die cut some branches from cut mat create die sets on Deluxe paper, color the branches with mowed lawn and fern green ink using dauber, shape the branches with shaping kit, apply clear glue with brush and cover with Nida Tanweer Magic Glitter Powder.

Stamp the sentiment on deluxe card and die cut the sentiment from smallest hexagon die cover edges with glitter and add as shown using hot glue.

Make a bow with ribbon, arrange all ready elements as shown using hot glue gun and embellish the card with Rhinestones, Pearls and pearl beads.

Other Products: Mowed Lawn Distress Ink, Rhinestones, Vellum Paper, Versamark Embossing Ink, Ranger Copper Tinsel Embossing Powder, Ribbon, Curved Pumpkin Distress Ink, Squeezer Lemonade Distress Ink, Nida Tanweer Magic Glitter Powder, Nuvo Drops, Hot Glue Gun, Sequins, Pearls, Pearl beads, Brush, Dimensional Tape.

Instructions:

Create a base for the card using Fancy Classic Rectangle Frame Die HCD2-7384, on white cardstock. Cut another layer of the same die on white cardstock.

Cut leafy border die on Luxe Gold cardstock adhere it using designer dries clear adhesive. Another layer on Luxe Gold Cardstock. With the same die on pattern paper also, as shown, adhere it using foam tape. Another layer on white and luxe gold cardstock. Off centre gold cardstock behind white cardstock.

Add sentiment from Just For You Sentiments Cling Stamp Set HCPC-3845 using archival ink-Coffee.

Stamp some Sunflower and leaves images from Rustic Sunflower Cling Stamp Set HCPC-3962 on Deluxe Flower Shaping Paper using archival ink-Tiger Lily and Library Green for leaves, and cut them with coordinating Rustic Sunflower Die HCD1-7364.  Color them using archival ink-sunflower and tiger lily for flowers and leaf green, library green for leaves and shape them using 3D Rustic Sunflower Shaping Mold HCFB1-5009. Add prills and Redland elements at the centre, then sprinkle crystal clear glitter.

Arrange these flowers and leaves as pictured.

Other Products: White card-stock, Big Shot Machine