Other Products: Copic Markers, White Cardstock

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Use the 5" x 7" Gateway Fold Card - White for your card base. For the front panel; cut a purple piece of designer paper from the Wild Aster Paper Collection with the Scalloped Flourish Gateway Die, position the sentiment from the Lattice Swirl Gateway Die and cut out, adhere panel to card base. Cut out the Lattice Swirl Gateway Die in white and adhere.

Stamp Small Wild Roses in Buttercup and Lilac Posies, sponge with same and cut out with coordinating dies, sculpt with Small Wild Rose Shaping Mold, add stamens and glitter. Stamp the Leafy Accents Cling Stamp Set in Bamboo Leaves, cut out with coordinating dies and sculpt with the 3D Leafy Accents Shaping Mold. Adhere flowers and leaves as shown.

For the inside of the card; cut out the striped paper from the Wild Aster Paper Collection with the Scalloped Flourish Gateway Die. Cut out the Elegant Swirl Gateway Die in white and adhere, use the center of the same die to cut out the butterfly paper from the Wild Aster Paper Collection and adhere.

For the third panel; Cut out the scalloped piece with the Scalloped Flourish Gateway Die in white, distress with Lilac Posies, cut out the centers of the Scalloped Flourish Gateway Die and Ornate Flourish Gateway Die in white and cut out a piece of dark purple paper from the Wild Aster Paper Collection with the Scalloped Flourish Gateway Die and adhere behind the Ornate Flourish Gateway Die, adhere the top and bottom from the Ornate Flourish Gateway Die and the center of the Scalloped Flourish Gateway Die. Stamp the Asters from the Wild Asters Spray set in black and color with Copic Markers, cut out with coordinating dies and adhere to bottom right.

Other Products: Ranger Archival Ink-Sun Dazed, White Cardstock, Die Cut Machine, White Seam Binding hand dyed with Majestic Violet Ink, Scor-Tape, Sun Dazed Ink

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Using the largest die from HCD2-7327 Elegant Swirl Gateway Die cut a piece of sheet 11B from the paper collection. This becomes a base or a shadow piece of the card front. Using Sheet 12B of the paper collection and the next die down and the smallest die from the die set, diecut. Glue this to the purple base piece and then to the card front. Using the die next to the smallest and white card stock cut this piece to be glued onto the card front. Glue it into place.

Wet the seam binding and scrunch then I laid down color onto my glass mat and pulled the seam binging through the ink to color. Set aside to dry. When dry tie a bow and set aside.

Next we will work on the flowers and leaves. I stamped the leaves with Fern Green and colored with Leaf Green. I colored the purple flowers with Majestic Violet and then colored with Sun Dazed in the center and Majestic Violet on the outside. The yellow flowers were stamped with Sun Dazed and colored with the same. Using coordinating dies, cut out the flowers. Spritz the flowers and leaves with water and run through the die cut machine inside the mold. Turn them out onto my mat to dry. When dry I poked a hole in the center and threaded through the stamen and used hot glue to hold them in place.

I used a piece of Scor-Tape and hot glue to adhere the bow to the card front and decided on my flower and leaves placement then hot glued them down.

The second panel was achieved by picking a pretty panel of the paper collection and using the largest die in HCD2-7325 Scalloped Flourish Gateway Die to cut out. Glue it down and this pretty piece of the paper collection will do the heavy lifting of this panel.

The back panel is achieved by cutting a shadow panel using Page 10B of the paper collection. Cut the decorative piece of the die set out of Page5-A of the paper collection. Glue it to the purple shadow piece. Using the center part of the die set to cut out the sentiment and then I glued a scrap piece of Page 5A to the back of the purple panel. Glue everything down and this completes the card.

Other Products: Die cut machine; Hot glue gun;

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Use the biggest die from the Scalloped Flourish Gateway and cut 3 from sheet number 9B of the Summer Garden Paper collection, adhere those to all 3 sections.

Use the next size and cut 2 from sheet number 1B, adhere to the last and middle section. Cut one from 6B which goes on the front.

For the back panel use the smaller dies from the set to achieve the look as shown on the card from sheet 9B, adhere to the panel. The middle panel stays for writing the personal message.

For the front, use a piece of the paper from sheet number 1B, use the smaller dies from the set to achieve the look and adhere to the card.

Stamp the leaves on white with the Cottage Ivy, color with the New Sprout, cut out with the coordinating die, ink the edges with Bamboo Leaves, place in the mold and shape by running it through the die cut machine.

Stamp the small Roses on white with the Deep Purple ink, die cut out, place in the coordinating mold and shape.

Stamp the Arianna Blooms on white with the deep purple, color with the Lulu Lavender, use the matching die and cut out. Ink the edges with the Lilac Posies ink. Use the Golf tool and Flower Shaping tools to shape the flowers. Put 2 together to make one flower, make the hole with the golf tool and add the stamens.

Add yellow prills to the white Roses. Adhere all the leaves and flowers to the center of the card. To finish, add glitter to all the leaves and flowers.

Other Products: White cardstock, Silver Liquid Pearls, Silver cardstock, Silver Delicata Ink.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Card size: 5 x 7”. Cut 1 panel off of the Gateway Fold Card Base. Use the outer die of the Lattice Swirl to cut shaped card leaving the left side of the die over-hanging about 1/4" to keep part of the fold (see video, Decorative Frame Dies above). Cut another front piece out of white and purple decorative paper using the outer die of the Lattice Swirl as before. Glue these to the card base.

Cut the decorative part of the Lattice Swirl twice, once out of white and once out of silver. Layer them together slightly off-set and glue together. Stamp “Thinking of You” using purple on white cardstock then die cut with a circle die 3 1/2”. Glue the circle to the underside of the layered decorative Lattice die cuts then glue to the purple card base.

Stamp Oakberry Lane Blossoms using Deep Purple, die cut, shape in mold (see video). Insert white and green stamen. Stamp leaves using Silver ink, die cut, shape then squeeze out a small amount of Silver Liquid Pearls, use your finger to spread it over the edges of the leaves for a more metallic silver look. Arrange flowers and leaves at bottom right side of card and 1 flower at the top center with 2 leaves. Use Rajni’s Crystal Clear on the flowers and just a tiny bit of Crystal Ultrafine on the card. Try to avoid the silver paper as much as possible.

Other Products: Smooth White Cardstock, Cairo Cream Cardstock, Flat Back Pearl, Versamark, Hot Glue

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: First, take a 5"×7" Gateway Fold card, cut 3 base mats from Cairo Cream cardstock using Scalloped Flourish Gateway die and adhere it on all 3 panels. Cut gateway frame from white cardstock using Elegant Swirl Gateway die, stamp sentiment using versamark on it and heat emboss with gold embossing powder. Adhere it on center panel of card. Stick some flat back pearl using clear adhesive.

Cut Luxe Gold cardstock and white cardstock using Elegant Swirl Gateway Die, arrange all die cuts on both side panels using foam strips as pictured.

Stamp Oakberry Blossom on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Shape flowers using groove golf tool. Pierce the center of flower petals and insert Rock Candy Stamens-Small. For 1 flower I use 2 layers. Stamp leaves using fern green ink and cut with coordinating dies. Shape leaves using shaping mold. Apply Art Glitter Clear Dries glue and add crystal clear on flowers and leaves. Arrange flowers and leaves using hot melted glue as pictured.

Other Products: Smooth Vanilla Cardstock, Cairo Cream Cardstock, Vellum Paper

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Ready side fold card measures 5" × 7". Cut a side fold shape card from vellum paper using Lattice Swirl Gateway die. Cut 2 decorative pieces from Vanilla Cardstock and 1 from Luxe Gold cardstock using Lattice Swirl Gateway die. Arrange all die cuts on vellum card using foam squares as pictured. Cut 1 base die cut from Cairo Cream cardstock and 1 from Luxe Gold cardstock. Adhere gold cardstock diecut inside the card and Cairo Cream cardstock on the back side of card.

Stamp Oakberry Blossoms on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Shape flowers using groove golf tool. Pierce the center of flower petals and insert Rock Candy Stamens-Small. For 1 flower I use 2 layers. Stamp leaves using fern green ink and cut with coordinating dies. Shape leaves using shaping mold. Apply Art Glitter Clear Dries glue and add crystal clear on flowers and leaves.

Arrange flowers and leaves using hot melted glue as pictured.

Other Products: White cardstock, Acrylic Shimmer additive

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size open: 7 x 15”, closed: 5 x 7”. Use the 3-panel white Gateway card base. Cut 3 panels from decorative paper using the outer die of the Elegant Swirl Gateway Die. Glue the paper to each of the 3 card panels. Die cut the full decorative die from white for the center panel. Die cut the decorative frame only (center cut out) for the first panel and cut out the decorative frame, center in, for the 3rd panel. Stamp on the solid center of the 3rd panel using Magenta Hue ink, the large sentiment with the floral top.

Glue each of the decorative dies to the corresponding panel and glitter each.

Stamp flowers using Magenta Hue, die cut, sponge Magenta Hue on the edges, form in shaping mold (see video) then glue 2 layers together for the small flowers and 3 layers for the bigger flowers. Insert green stamen. Stamp leaves using Fern Green, sponge with Leaf Green, die cut then form in the shaping mold. Stamp small butterflies from the Dahlia flowers as accents for each panel using Magenta Hue. Glitter the flowers with Rajni’s Crystal Clear.

Arrange some of the flowers and leaves on the first panel at the lower left corner/side. Arrange about 5 flowers and leaves at the top of center panel and arrange the rest of the flowers on the right bottom corner of the 3rd panel.

Paint leaves with a combination of lacquer and shimmer additive. Glue tiny butterflies 2 for each panel. Stamp You’re an Amazing Friend on white using Magenta Hue and die cut with long straight die then fishtail the ends, curl and tuck into flowers on the first panel.

Other Products: Ranger Archival ink – Dandelion, spray adhesive, stamp positioner

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Sponge all the edges of the fold out card with Vivid Chartreuse ink. Front: Sponge with Vivid Chartreuse ink and adhere to the front of the panel. Die cut two decorative dies out of white cardstock using the No. 2 die from the HCD2-7328 Lattice Swirl Gateway Die set. Adhere together, sponge the edges with Vivid Chartreuse and add Frosting Powder using spray adhesive and adhere to the front with foam strips. Die cut the insert using the No. 2 and No. 3 die out of white cardstock and adhere to the centre as shown. Die cut the letters out of pink patterned paper and insert into the white letters.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere to the bottom left of the panel as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Middle panel: Die cut the green patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edge with Vivid Chartreuse ink and adhere to the panel. Die cut the house image using the scalloped edge (No. 2) die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edges with Vivid Chartreuse ink and adhere to the panel. Add Ultrafine Crystal glitter to the flowers on the house.

Back panel: Die cut the pink floral patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set. Sponge with Vivid Chartreuse ink and adhere to the panel. Die cut the lattice die using the No. 2 die from the HCD2-7328 Lattice Swirl Gateway Die set out of white cardstock, add Frosting Powder using spray adhesive and adhere to the panel. Stamp the ‘I Miss You” sentiment from the HCPC-3844 For My Friend Sentiments Cling Stamp set in Lilac Posies ink with a stamp positioner on the white insert with Lilac Posies ink and adhere to the centre of the lattice die as shown.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere to the bottom right as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Other Products: Ranger Archival ink – Dandelion, spray adhesive, stamp positioner, gloss gel medium

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Sponge all the edges of the fold out card with Vivid Chartreuse ink. Front: Die cut the pink floral paper using the No. 1 die from the HCD2-7327 Elegant Swirl Gateway Die. Sponge the edge with Vivid Chartreuse ink and adhere to the front of the card. Die cut two frames using the No 2 die from the HCD2-7327 Elegant Swirl Gateway Die and the No. 3 die x 2 from white cardstock. Adhere the two pieces together and sponge the edges with Vivid Chartreuse ink. Add Frosting Powder with spray adhesive and adhere to the front of the patterned paper. Die cut the pierced frame and inner out of white cardstock and green patterned paper using the No. 3 die. Adhere the green paper pierced frame to the white pierced frame and adhere to the middle of the decorative frame. Adhere the plain green patterned paper inner to the inside of the frame. Die cut the inner decorative die from white cardstock using the No. 3 die and the No. 4 die and adhere to the inside of the frame. Cut a window out of the patterned paper and adhere to the base of the inner frame as shown.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere to the bottom of the window.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Middle panel: Die cut the pink floral patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Die set. Sponge the edge with Vivid Chartreuse ink and adhere to the middle panel. Die cut the decorative die out of white cardstock using the No. 2 die from the HCD2-7327 Elegant Swirl Gateway Die set. Sponge the edges with Vivid Chartreuse ink and adhere to the front of the panel. Stamp the sentiment from the HCPC-3930 Elegant Gateway Sentiments Cling Stamp Set and die cut using the No. 3 die from the HCD2-7327 Elegant Swirl Gateway Die set. Adhere to the centre of the panel as shown and add Ultrafine Crystal glitter to the sentiment using Dries Clear glue.

Back panel: Die cut the pink floral patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Die set. Sponge the edge with Vivid Chartreuse ink and adhere to the middle panel. Die cut the decorative die out of white cardstock using the No. 2 die from the HCD2-7327 Elegant Swirl Gateway Die set. Sponge the edges with Vivid Chartreuse ink and adhere to the front of the panel. Die cut the centre out of green patterned paper using the No. 3 die from the HCD2-7327 Elegant Swirl Gateway Die set and adhere to the front of the panel as shown. Die cut the inner decorative panel out of white cardstock using the No. 3 and No. 4 die from the HCD2-7327 Elegant Swirl Gateway Die set and adhere to the front as shown. Die cut the round tag using the coordinating die from the HCD1-7203 Ornamental Tags Die set. Stamp the ‘I Miss You” sentiment from the HCPC-3844 For My Friend Sentiments Cling Stamp set in Lilac Posies ink with a stamp positioner. Adhere to the top of the panel as shown and add Ultrafine Crystal glitter with Dries Clear glue on the sentiment.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere to the bottom right as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Other Products: Ranger Archival ink – Dandalion, spray adhesive, stamp positioner, gloss gel medium

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Sponge all the edges of the fold out card with Vivid Chartreuse ink. Front: Die cut the pink patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edges with Vivid Chartreuse ink and adhere to the front of the card. Die cut the scallop edge using the No. 2 die and the No.3 die out of white cardstock 3 times. Adhere all the pieces together and sponge the edge with Vivid Chartruese ink. Add Frosting Powder with spray adhesive and adhere to the front of the card. Die cut a frame using the No. 3 die and the insert dies and the stitch dies out of white cardstock. Sponge the frame with Vivid Chartreuse ink, add Frosting Powder with spray adhesive and adhere inside the scallop frame. Using the upper and lower plain insert dies die cut floral patterned paper and adhere to the top and bottom as shown. Die cut the decorative dies out of white cardstock using the plain and decorative upper and lower dies and adhere to the top of the patterned paper. Die cut the small cottage image from the patterned paper using the middle plain edge insert die. Sponge the edges with Vivid Chartreuse ink and insert in the centre as shown.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Middle panel: Die cut the pink patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edge with Vivid Chartreuse ink and adhere to the middle panel. Die cut the scallop panel out of white cardstock using the No. 2 scallop edge die out of white cardstock. Sponge the edge with Vivid Chartreuse ink and adhere to the front of the pink patterned paper. Die cut the green patterned paper using the No. 3 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edge with Vivid Chartreuse ink and adhere to the front of the scallop edge. Die cut the frame from white cardstock using the No. 3 die from the HCD2-7327 Elegant Swirl Gateway Die set. Sponge with Vivid Chartreuse, add Frosting Powder using spray adhesive and adhere to the centre of the green paper. Stamp the sentiment from the HCPC-3930 Elegant Gateway Sentiments Cling Stamp Set in Lilac Posies on patterned paper and die cut using the frame die from the HCD2-7327 Elegant Swirl Gateway Die set. Sponge the edge with Vivid Chartreuse ink and adhere to the centre of the frame. Add Ultrafine Crystal glitter using Dries Clear glue to the sentiment.

Back panel: Die cut the pink patterned paper using the No. 1 die from the HCD2-7325 Scalloped Flourish Gateway Die set, sponge the edges with Vivid Chartreuse ink and adhere to the front of the card. Die cut the scallop edge using the No. 2 die out of white cardstock, sponge with Vivid Chartreuse and adhere to the front of the pink patterned paper. Die cut a frame using the No. 3 die and the insert dies and the stitch dies out of white cardstock. Sponge the frame with Vivid Chartreuse ink, add Frosting Powder with spray adhesive and adhere over the white scallop image. Die cut the upper and lower inserts out of patterned paper using the upper and lower plain edge dies from the HCD2-7325 Scalloped Flourish Gateway Die set. Sponge the edges with Vivid Chartreuse ink and adhere to the upper and lower inner frames as shown. Die cut the centre panel using the inner plain edge die from the HCD2-7325 Scalloped Flourish Gateway Die set out of floral patterned paper and adhere to the centre. Die cut the middle decorative die using the middle plain edge and decorative dies.

Stamp the leaf images from the HCPC3-907 Large Wild Rose Stamp Set in Library Green ink on Deluxe Flower Shaping paper. Colour with Vivid Chartreuse and Bamboo Leaves inks and die cut with the coordinating die. Sponge the edges with Lilac Posies ink and the backs with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using glossy gel. Adhere to the bottom right as shown.

Stamp the flower images from the HCPC-3906 Small Wild Rose Stamp Set in Lilac Posies ink on Deluxe Flower Shaping Paper. Colour the centres with Cantaloupe and Dandelion inks and the outsides with Magenta Hue ink and die cut with the coordinating dies. Sponge the edges of the flowers with Lilac Posies ink and the backs with Magenta Hue ink. Shape using the coordinating mold, pleat with your fingers and assemble using two of the larger size and one of the smaller size. Pierce the centres of the flowers and insert the gold coloured pearl stamens and magenta coloured rock candy stamens. Add Crystal Clear glitter using clear glossy gel, trim the threads and adhere over the leaves as shown.

Stamp the long sentiment from the HCPC-3930 Elegant Gateway Sentiments Cling Stamp Set in Lilac Posies ink on green patterned paper and die cut using the long banner die from the HCD1-7204 Arrows and Banners Die set. Sponge the edge with Vivid Chartreuse ink and adhere to the back panel above the roses as shown.

Other Products: Dimensional adhesive, hot glue, hot glue gun, vellum paper, scissors, paper trimmer, die cutting machine ribbon

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Cascading Petals Collection watch the tutorial at https://youtu.be/DqhvfrsTI00.

Instructions: Cut out the dazzling dahlia paper collection using the mat layer of the Elegant Swirl Gateway die to cover the front and insides of the 5 x 7” Gateway fold card.

Cut the decorative die cut from Elegant swirls gateway die in white card stock. Cut two such pieces. Only cut out the frame and leave centre die cuts. Adhere this frame on the front of the first fold.

Make a slanting slit on the second fold on the pattern paper to create a pocket. Add the Decorative accents die cut on this slit. Cut out two tags from the paper collection using the ticket and tags die. Add ribbon and add inside the pocket. Cut out an oval frame using the oval die set. Add vellum paper as backing and stamp the birthday sentiment in black ink from Just for You sentiment cling stamp set.

Stamp the bird on branch images from the Floral song bird cling stamp set on white card stock and colour with Zig markers. Cut with matching die and add on the oval frame.

Stamp the wisteria petals from Wisteria petals cling stamp set wih Cactus flower ink on deluxe flower shaping paper and colour with the pink shade of the archival ink. Stamp and colour leaves in same manner. Cut with matching die. Shape the wisteria petals and leaves in Deluxe flower shaping kit.

Add stamens in the flowers. Arrange the flowers and leaves on the card front.

Other Products: Ribbon, cutting machine, Archival Ink Pad- Chrome Yellow

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Cover the fold-out base with luxe gold cardstock on the front and patterned collection paper on the center and back using a simple die from the Scalloped Flourish Gateway Die kit. Cut the Elegant Swirl Gateway Die decorative frame on white thin paper several times and glue as shown.

On patterned paper, stamp a decorative sentiment from Elegant Gateway Sentiments Cling Stamp Set and glue it inside, add a pocket and a tag there as well.

Create a floral arrangement of flowers, buds and leaves arranged in layers. Stamp the flowers and leaves on deluxe flower shaping paper, apply the selected colors using daubers, cut with coordinating dies and shape in the mold. Create multi-layer flowers and buds as shown and adhere with the leaves. Add a ribbon.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, self-adhesive pearls, ribbon

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Leafy Accents shaping molds, watch the tutorial at https://www.youtube.com/watch?v=YaDMrVikE44.

Instructions: Use the biggest die from the Scalloped Flourish Gateway and cut 3 from papers of the Sweet Peony Paper collection, adhere those to all 5 sections. Use the next size and cut 3 from white cardstock, adhere them flat to the last and middle section, use dimensional adhesive for a front panel. Use the next size and cut out a pink paper, adhere it to the front panel. Cut out two white cutouts from Elegant Swirl Gateway Die and adhere them to the last and middle section. Leave a white space at the middle panel for handwritten wishes. For the last panel stamp the Black Friday Sentiments in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper, diecut with Elegant Swirl Gateway Die and attach to the panel. Cut out white decorative elements with Scalloped Florish Gateway Die (top and bottom) and Ornate Flourish Gateway Die (center) with their background, attach them together, then use dimensional adhesive to attach them to the front panel. Stamp the sentiment from Celebrate Love Sentiments Cling Stamp Set in Vibrant Fuchsia ink onto white cardstock and cut it out.

Stamp 3 blossoms from Large Wild Rose Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper and diecut with coordinating dies. Stamp blossoms from Oakberry Lane Blossoms Cling Stamp Set in Vibrant Fuchsia ink onto Deluxe Flower Shaping paper and diecut with coordinating dies. Stamp the smallest size of Flowering Dogwood stamp in Pink Peony ink onto same cardstock and diecut with coordinating dies. Stamp 7 flowers from Tulip Vase & Fillers stamp in Vibrant Fuchsia ink and diecut with coordinating die. You`ll also need about 5 branches from Leafy Accents Cling Stamp Set and 3 Classic Rose leaves. Stamp them in Leaf Green ink, diecut with coordinating dies. Use the Stack and Store daubers to color big flowers and leaves. For the flowers use Vibrant Fuchsia and Pink Peony ink, for leaves use Leaf Green ink. Shape the Oakberry Blossoms, Flowering Dogwood and leaves using their coordinating shaping molds. Wild Roses shape with Deluxe Flower Shaping stylus. Thread white and pink stamens through the centers of flowers and attach with hot glue, trimming off the excess string. Use dimensional adhesive and hot glue to attach ribbon, blossoms and leaves onto card as pictured. Add small, white swirls – leftovers from decorative elements cut out with Scalloped Florish Gateway Die.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Rococo rose and basic gray ink pads – Stampin Up!, purple metallic thread, metallic pearl bead, purple gel pen, Copic:- YG01, RV00, RV02, white card

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Diecut 2 largest scalloped flourish gateways from patterned paper and a 3rd using the pale blue paper from the tender moments collection, edge with rococo rose ink and adhere onto the card base, placing the blue in the centre.

Die cut 2 of the largest decorative elegant swirls using purple stripe paper from the tender moments collection and diecut the smallest die from the centre of each. Add a light shading of deep purple and rococo rose ink to the edges and centre. Adhere to the card base.

Die cut the largest decorative elegant swirls die using the patterned paper, edge with deep purple and rococo rose ink and adhere to the centre of the card base.

Stamp the sentiment onto white card using the basic gray ink and colour using the copics and gel pen. Die cut using the 2nd largest elegant swirl die. Retain the outer edge and adhere to it a die cut using patterned paper. Sew metallic thread around the holes in the frame, adhere this – and the sentiment to the centre of the card. Tie the metallic thread and secure a metallic pearl bead at the top using a little hot glue.

Make the flowers: Stamp the blossoms onto flower shaping paper using desert sand ink. (2x large, 3x medium, 2x small). Colour using pink peony ink and add a dot of elderberry to the centre of each. Die cut. Edge each petal and colour the reverse using rococo rose ink and place face down into the mold. Spritz lightly with water and run through the die cutting machine to shape. Thread a stamen into a medium set of petals and then a large set, secure with hot glue – make 6. Make 4 medium flowers using medium and small petals. Make 6 small flowers with a single set of petals and a different colour stamen.

Make the sprays: stamp the Delicate Pansy Sprays onto flower shaping paper using basic gray ink. Dot gel pen on the dotty areas, and colour the florals with pink peony ink, colour the leaves using new sprout, Die cut and add bamboo leaves to shade. Shape using the flower shaping tools. Make 4.

Position the sprays and flowers onto the back and front panels of the card. Die cut 6 of the small swirls from the cut mat create die set using dark purple paper from the cascading petals collection and secure all the elements onto the card using hot glue

Other Products: White Cardstock, Ribbon, Scissors, Diecutting Machine, Paper Trimmer, Crop-a-Dile

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Card size is 5 x 7”. Using the largest Scalloped Flourish Gateway Die, cut three pieces of the Wild Rose Paper Collection, ink the edges using Archival Plum ink and adhere to the three panels of the Gateway Fold Card.

Diecut the decorative Elegant Swirl Gateway Die 3x from white cardstock. Cut out the center from white cardstock using the third largest die from the same set. Cut the smallest die 1x from the inside diecut. Diecut the bottom section of the Ornate Flourish Gateway Die from white cardstock, trim to fit the inside of one of the Elegant Swirl Gateway diecuts and adhere on sides and bottom. Leave top open to use as a pocket. Sponge all the diecuts with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. Adhere the diecuts to the card base as shown.

Stamp the Wild Roses on Deluxe Flower Shaping Paper using Archival Plum ink, color with Rose Madder and diecut using the coordinating dies. Add plum ink to the edges of the flowers and shape in the 3D Wild Rose Shaping molds. Finish shaping by pleating with fingers, offset petals and adhere three together for each of the larger flowers and two petals for the smallest flowers. Color white rock candy stamens using Rose Madder ink. Add dries clear glue and crystal clear glitter to the Rose Hip stamens. pierce the centers of flowers using groove golf tool and add stamens. Adhere using hot glue.

Stamp the leafy accents on Deluxe Flower Shaping Paper using Bamboo Leaves ink. Color using the same ink, diecut using coordinating dies and shape using the Leafy Accents Shaping mold.

Sponge the flowers and leaves with dries clear adhesive, sprinkle with crystal clear glitter and adhere to card base using hot glue.

Stamp the ‘You’re an amazing friend’ sentiment from Elegant Gateway Sentiments Cling Stamp Set on white cardstock with Archival Plum ink, diecut using the scalloped die from the Ticket and Tags Die set, trim the left side, sponge with dries clear adhesive, shape and adhere to card front using hot glue.

Stamp the ‘Thinking of You Today’ Sentiment from Elegant Gateway Sentiments Cling Stamp Set on a 6 x 6” panel from the Wild Rose Paper Collection, diecut using the third largest Elegant Swirl Gateway Die, adhere to white same size diecut, edge the edges with plum ink, punch a hole in top using Crop-a-Dile and add ribbon. Insert in pocket. (Use to write personal sentiment on back.)

Using dries clear adhesive, sponge the designer paper here and there and sprinkle with glitter.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels 227, 210

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: For the card base use Gateway Fold Card – White. Cut 6 panels using outside die from the Scalloped Flourish Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Elegant Swirl Gateway Die outside frame from white paper and rest of dies from paper collection and adhere to the front of the shaped card using Darice Adhesive Foam Strips.

Stamp the Dazzling Dahlia Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Light House and cut using the coordinating dies. Color with Gallery soft oil pastels 227, 210. You will need 2-3 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using one of the larger shaping tools. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves using Dahlia and Leaves Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Shape leaves using Mold as shown on the video. Adhere the flowers and leaves to card using a hot glue gun.

Stamp sentiment using For My Friend Sentiments Cling Stamp Set on the paper from the collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Fussy cut a sentiment ticket from paper collection and place onto the card using adhesive foam strips.

Other Products: Off white Cardstock, Antique Linen Distress Ink pad, Mowed Lawn Distress Ink, hot glue, hot glue gun, scissors, funnel tray, Die Cutting Machine, Twine, Nida Tanweer Magic Glitter Powder, Versamark Ink, White Embossing Powder, Pearl Beads.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Die cut all elements 6x from Elegant swirl gateway die set except shadow die on off white cardstock and cut 3 shadow die on pattern paper. Layer with same die cut for the sturdiness. Color the card base edges with pink peony ink using dauber. Adhere all 3 shadow diecuts on all 3 panels.

Stamp the ‘Thinking of You Today’ sentiment from Black Friday sentiments stamp set in Magenta Hue Ink on off white card die cut using the 2nd largest elegant swirl die. Color the edges with pink peony ink. Assemble all diecuts as shown. Add pearl beads on each hole of second larger die using clear glue.

For the flowers, stamp the Oakberry Lane flowers from Oakberry Lane stamp set using Versamark Embossing ink on vellum paper cover with white embossing powder and heat using heat tool, diecut all flowers using coordinating die, color from back using Pink Peony ink, shape the flower using shaping Kit and take 2 same size layers of flowers to make 1 flower using hot glue gun. Color the stamen with antique linen ink make a hole in the centers and add stamens using hot glue. Apply glue on the flowers using sponge and dress with Nida Tanweer Magic Glitter Powder. Make different size of flowers.

Stamp the leafy accents from leafy accents stamp set with leaf green ink, color using the Stack and Store daubers and Vivid Chartreuse ink and diecut using coordinating dies. Color the edges with mowed lawn. Shape using mold.

Arrange all ready elements and assemble the card as shown.

Other Products: Wendy vecchi ink orange blossom, versamark watermark stam ppad, ranger white embossing powder, versamagic perfect plumeria, foam tape, vellum

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: Create a fold out card using the gateway fold card bases. Cut one panel from the card bases to create a single fold card. Cut the pattern papers from the dazzling dahlia paper collection and glue on the card base. Cut the decorative centers from the ornate flourish gateway die set using pattern papers from the dazzling dahlia paper collection and luxe gold cardstock. Align and adhere the decorative cuts on the gold cuts. Cut the decorative frame from the elegant swirl gateway die. Glue the decorative centers on the card base and adhere the frame using foam strips.

Stamp the roses from the classic rose cling stamp set on vellum with versamark watermark and heat emboss them in white and color them using orange blossom ink. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using memento bamboo leaves and olive green. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3D shaping mold. Stamp the smallest flowers from the Purr-fect posies stamp set with archival fern green and versamagic perfect plumeria, lightly color the petals using the same inks. Cut the petals using the coordinating die and shape them. Add the pastel beads stamens to the flower centers.

Arrange everything as shown. Lastly, add a sentiment and dust the flowers with crystal clear glitter powder.

Other Products: White card stock, Dimensional adhesive, paper trimmer, die cutting machine, light grey card stock, thin white ribbon, hot glue gun

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: The basket has a box made from grey card stock. To make this, cut two pieces of grey card stock 8 1/2" by 5”. Score the pieces at 2 1/2”and 6” on the longer side. Turn the paper to shorter side and score at 2”. Fold the flaps and adhere the sides together to form a box. Adhere the base.

Cut four pieces of Lattice Swirl gateway die from white card stock. Cut 4 pieces of the mat layer in grey card stock from the same die set. Adhere together the white die cuts two pieces together to get a pair of decorative lattice die cuts. Adhere the two pieces of mat layer to get a pair of mat layer die cuts.

Adhere the white die cuts on the mat layer. Adhere each piece to the front of the box and the back of the back with design facing outwards on both sides. To cover the sides, cut two pieces of die cuts from the Scalloped Flourish Gateway die and add to the sides of the basket.

Stamp the dahlia flower 5 times from the small dahlia stamp using pink peony ink on flower shaping paper. Colour with a blend of pink peony and coastal coral inks using sponge daubers. Shape the flowers in 3D flower shaping mold. Layer them together to form one flower. Make a bunch combining the stamens together and add to the flower centre. Make leaves using the green archival inks and the Wild aster cling stamp and die and dazzling dahlia cling tamp and die.

Arrange the flowers and leaves on the basket front. To finish, cut a sentiment tag from the paper collection and tie on top. Add glitter to highlight the flower.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, watercolor pencil

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: The finished card measures 5 x 7". For the base of your card choose a 5 x 7" Gateway Fold Card – White. With the Scalloped Florish Gateway die cut 3 pieces of paper with the biggest die from the sheet #3B, ink the edges of all the papers with the Coastal Coral ink and a dauber. Glue on the card base.

Cut 3 swirls from the Elegant Swirl Gateway die (the second largest) from white cardstock and glue in on the 3 bases of the card. With the same die kit, cut 2 pieces with the third larger die (one in sheet #9B and one in sheet #3B). Glue the border on the front base and on the last base. On the center of this diecut paper, glue a white diecut paper from the smaller part of the die kit. Glue this with 3D foam on the front and on the last base.

Make flowers from the Wild Rose Collection. Stamp your flowers with coral ink onto white flower shaping paper, color the centre with yellow ink and shade the rest of the flower using coral. Color the reverse of the flowers and diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Put glue in the center of the flowers and add rock candy stamens and rose hip stamen dipped in the crystal powder. (I used 3 larges petals to make a flower). I also do one smaller with yellow ink and coral ink in the center.

Make tiny flowers with the same color by using the French Cottage Collection and white stamens. Also make leaves from both flower collections and use the leaf green ink. Glue your flowers on the front of the card and add leaves to fill the empty space. Also add tiny ones on the last page of the card.

Stamp your sentiment in the middle page with coral color ink. To add the finishing touch, simply add colors with watercolor pencil!

Other Products: Hot glue gun, Foam Inking tools, Double sided 3D foam tape, Double sided tape, Ranger Archival Ink Pads-Saffron, Fussy cutting scissors, Cardboard (cereal box), Glitter

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Using the gateway fold ready to use card base. The size: 5 inches x 7 inches. Ink the outer edges of this card base using the Tea Rose ink and inking tools.

Taking the white cardstock and the outer frame from the die set Elegant Swirl Gateway, die cut a frame. Taking the inner frame with the doted holes in it, die cut this four times and adhere the four layers together. From one of the off cuts from the frame just cut, stamp the sentiment “Thinking Of You Today” from the Sentiments set. Making the sentiment banners by stamping the “You’re An Amazing Friend” then trim the points as shown. This is stamped in Sepia ink. Colour the sentiment with the archival inks and use the Tea Rose for the edges.

Using the frames and the paper from the sheet 12B and 5A die cut the rest of the cuts needed for the card. Adhere all the die cuts in place including the previous frames made.

To make the Dahlias and leaves: The stamping is done with the Library Green ink, the colour used for the leaves is the Leaf Green ink and the colours Saffron and Tea Rose for the Dahlias. Bring shape to the Dahlias and leaves using the matching molds and the shaping tools. Pinch or pleat the ends of the petals to make them look more like a Dahlia petal. The petal ends and the leaves are finished with glitter, apply clear drying glue then dip into the glitter, put aside to dry before using. The Dahlias have two petal layers, the centres are filled first with clear drying glue then the prills.

Cluster the Dahlias and leaves to the front of the card and adhere in place. Adhere the sentiment banner across the card front. Adhere the sentiment banner across the foot of the frame in the second card section. Adhere a Dahlia to the right of the sentiment on the third section of the gateway card. Add leaves as needed to finish. Take note this Dahlia will pop out of the card when the card is closed and will not lay flat but it is adorable when standing.

Other Products: Cardstock- White, Beads, Buttons, Distress Oxide Ink (Squeezed Lemonde, Worn Lipstick), Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, 3D Foam Squares, Dual Tip Glue Pen)

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Layout is 12 x 12”. The light green patterned paper is the background. Cut a strip of the green patterned paper that is 1.5 x 12” and adhere to the middle of the layout. Take both sheets of the patterned paper with the decorative light pink floral borders. Fussy cut out both borders, and then adhere to the light green patterned background using foam tape.

Using the Elegant Swirl Gateway Die, die cut the photo in the shape of the opening. Using the largest of the die, die cut in light pink patterned paper. Then the decorative layer from white cardstock. Using foam squares, add the photo and decorative layer to the pink patterned layer. Add the matted photo to the middle of the layout using foam squares. Find and cut out the small journal block and adhere below the photo using foam squares.

Stamp and die cut 2 of each of the following using brown ink (Staz On- Timber Brown): Large Leaf, Small Flower, Large Flower and both Blooms. Add color to the middle of all flowers using yellow ink (Distress Oxide- Squeezed Lemonade) and daubers. Add color to the tips of the flower petals using pink ink (Distress Oxide- Worn Lipstick). Add color to the leaves using green ink (Archival- Olive) and daubers. Shape the flowers and leaves using the coordinating shaping mold. Assemble the flowers and add beads to the middle using liquid adhesive. Let dry.

Add the large flower to the left of the matted photo. Add the other blooms to the left and the right of the matted photo. Add buttons to the decorative frame.

Other Products: Hot glue gun, Green organza ribbon, Foam Inking tools, Double sided 3D foam tape, Double sided tape, Ranger Archival Ink Pad-Saffron, Glitter.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: The gateway premade ready to go card base measures 5 inches x 7 inches. Fold the card so you can make a pocket with two of the sections. Apply a thin layer of clear drying adhesive to the three straight edges then close to make a pocket, leaving the rounded edge open. NOTE: Check to see how big the opening is before making the tag.

Using the sheets 5A , 9B and the die sets Scalloped Flourish Gateway and the Ornate Flourish Gateway, die cut the frames and elements needed for this card. Ink the edges with the Saffron, Tea Rose inks and the foam inking tools. Adhere in place using the clear drying adhesive and the foam 3D double sided tape.

To make the Dahlias and the rest of the embellishments: The Dahlias have each, two layers. Stamp the leaves and Dahlias with the Library Green ink then use the colours Leaf Green, Saffron Tea Rose and Red Geranium to bring colour to them. These colours are also used to colour the sentiments. Bring shape to the flowers and leaves by using the matching molds. The tips of the petals are pinched and pleated to make them more realistic. Clear drying adhesive is applied to the petal tips and leaves then dipped into glitter. Put aside to dry before using. Adhere all together and to the card base.

To make the tag: Die cut the plain frame from the Scalloped Flourish Gateway set, trimming on both sides if needed to fit into the pocket. Stamp the sentiment from the Elegant Gateway Sentiment set. Colour with the inks and use the Saffron ink for the edges. Adhere a triple bow to the top of the tag. Slide into the pocket. The bow will pop out above the card top so this makes the card fun when open or when it is closed.

Make a sentiment banner for the front of the card and adhere this so it comes out from under the flower cluster. This card does not close flat. If you wanted it to close flat, all you need to do is not shape the petals of the inside flower as much or flatten it after shaping put a heavy book on it overnight. Then you will have shape but not the height. Have fun with that.

Other Products: Altenew watercolors, Brustro green gold brushes, Brustro hot pressed watercolor cardstock, glitter, rhinestones, pearls and double sided foam tape

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a piece of 4 3/4" x 6 3/4" pattern paper from Tender Moments Paper Collection and adhere it on a 5" x 7" white card base made with Deluxe Flower Shaping Paper. Trace the design on the top with Designer Dries Clear Adhesive with the Metal Tip attached to the nozzle and sprinkle glitter. Leave it to dry.

Die cut a piece of white cardstock and a piece of pattern paper from the same collection using the dies from Lattice Swirl Gateway Die and adhere them together. Adhere this piece on the card front as shown using double sided foam tape.

Stamp the images from Baby's Air Balloon Cling Stamp Set and Baby's Friends Cling Stamp Set on a piece of Brustro hot pressed watercolor cardstock and die cut using the matching dies from Baby's Air Balloon Die and Baby's Friends Die. Color in all the images using Altenew watercolors and Brustro green gold brushes.

Die cut 1 more piece of white cardstock using the dies from Baby's Air Balloon Cling Stamp Set and adhere it behind the colored piece. Cut slightly along the lower edge of the tusk of the elephant image and tuck and adhere its body behind the basket of the hot air balloon as shown. Apply tiny drops of Ebony Black Nuvo Crystal Drops to its eyes. Adhere the final piece on the card. Add a few silver rhinestones to the die cut and pearls to the hot air balloon to add finishing touch.

Other Products: watercolor markers, white cardstock, soilver cardstock

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Dazzling Dahlia Collection watch the tutorial at https://youtu.be/KIIpo2C9oDs.

Instructions: Use HCCB1-495 5 "x 7" Gateway Fold Card - White. From the paper collection, cut the 6 largest elements from the HCD2-7325 Scalloped Flourish Gateway Die set and glue to the base. From white paper, cut 3 frames from the HCD2-7327 Elegant Swirl Gateway Die set and glue to the base. From the silver paper, cut out 3 smaller matching frames and glue them. From the smaller frame, cut an element out of white paper and add a sentiment from the stamp set HCCP-3930 Elegant Gateway Sentiments Cling Stamp Set and glue.

Stamp images from the HCPC-3929 Dahlia and Leaves Stamp Set and HCPC-3922 Woodsy Winterscapes. Colour with watercolor markers and die cut using the coordinating die. Glue the flowers as shown.

Other Products: Altenew watercolors, Brustro green gold brushes, Brustro hot pressed watercolor cardstock, rhinestones and double sided foam tape

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Calla Lily Collection watch the tutorial at https://youtu.be/VWKPoXjpiug.

Instructions: Die cut 3 pieces of pattern paper from Calla Lily Paper Collection using the largest die from Scalloped Flourish Gateway Die and adhere them on the 3 sides of 5" x 7" Gateway Fold Card.

Die cut more pieces of pattern paper from same paper collection using the dies from Elegant Swirl Gateway Die and Lattice Swirl Gateway Die. Adhere slightly smaller pieces of white cardstock behind the die cuts that will be used on the card front and adhere them on the card base using double sided foam tape. Adhere the remaining die cuts on the following sides as shown using Designer Dries Clear Adhesive.

Stamp the image from Swan Lake Cling Stamp Set using Jet Black Archival Ink on a piece of scrap paper and then immediately stamp on watercolor cardstock to get second generation stamping or grey stamping. Color in the images using Altenew watercolors and Brustro green gold brushes. Die cut the images using the matching dies from Swan Lake Die. Die cut 1 more piece of cardstock using the same dies and adhere them behind the colored pieces. Adhere and arrange all the 3 pieces on the card front as shown. Embellish the frame with rhinestones to add finishing touch.

Other Products: scissors/paper trimmer, hot glue gun, self-adhesive pearls, shaker pieces, versamark, clear embossing powder

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

Instructions: Die-cut the outer mat in orange and the swirl frame in purple from the Dazzling Dahlia Paper Collection and mat and layer together, edge the outer mats with Archival Majestic Violet. Position the gateway die onto this and die-cut. Die-cut the outer mat and gateway die in purple and adhere to the front inside of the gateway card. Position the die-cut orange/purple mat and layer on the front of the gateway fold card and place the gateway die inside of the aperture. With a pencil draw around the inside edge of the gateway die. Remove the die-cut aperture and tape the gateway die onto the pencil line and die-cut. Cut a coordinating outer mat for the middle section of the gateway card from the Dazzling Dahlia paper pad and adhere. Die-cut another gateway in purple and another in white cardstock. Close the gatefold card and use the aperture to position the dot purple frame onto the middle section, then adhere the internal part of the die-cut. On the white internal part of the gateway, stamp out in black versamark and clear heat emboss ‘Thinking of You Today’. Color the sentiment with Zig Clean Color Markers and adhere with dots to the center. Die-cut the Elegant Swirl Gateway Die in reverse colorway to the front of the card and mat and layer onto the back of the card, adding a white swirl decorative die-cut to the center.

Cut with scissors a piece of clear cardstock smaller than the orange outer mat on the front of the card and adhere to the card base prior to adhering the orange and purple mat and layer. Cut another piece of clear cardstock and adhere to the back of the orange dot arch gateway (or adhere first then trim off the excess clear cardstock around the arch with scissors). Apply foam strips behind the orange dot arch frame and prior to adhering to the front of the card, add some shaker pieces onto the existing clear cardstock.

Stamp onto Deluxe Flower Shaping Paper in Archival Red Carnation the Wild Small Rose. Use the daubers to color with Bright Tangelo. Die-cut and color the backs in Bright Tangelo and edge with Carnation Red and Sepia. Place in the mold and spritz with water prior to running through the die-cutting machine. Use the Flower Shaping Tool Kit to cup the centers. Adhere the petals with hot glue and add dries clear to the centers prior to adding prills and glitter.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green and die-cut with coordinating dies. Color the back of the leaves in Leaf Green and fronts in Leaf Green and Vivid Chartreuse, edge the leaves in Library Green. Place in the coordinating mold and spritz with water prior to running through the die-cutting machine.

Use a hot glue gun to add Wild Roses to the front and back panels of the gateway fold card then apply self-adhesive pearls over the visible dots.

Other Products: White cardstock, diecutting machine,

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Use the Elegant Swirl Gateway Die to create your card base on white Cardstock. Cut out a starry piece of designer paper with the same die from the Festive Winterscapes Paper Collection and adhere. Cut out the outer part of the Elegant Swirl Gateway Die in white cardstock and adhere, cut out the center part in white cardstock twice and adhere to the nativity scene cut from the paper collection, adhering the extra layers will give dimension. Distress with Blue Danube and adhere to center.

Cut out the sentiment from the paper collection with the Arrows and Banner Die and trim, distress with Blue Danube and adhere as shown.

Stamp poinsettias from the Christmas Poinsettia and Holly Cling Stamp Set in in Blue Danube, sponge the centers with Vivid Chartreuse and the outer petals with Blue Danube and Paradise Teal, cut out with coordinating dies and sculpt with the 3D Christmas Poinsettia Shaping Mold, add prills and glitter. Stamp the holly from the Christmas Poinsettia and Holly Cling Stamp Set in Bamboo Leaves, sponge with same and sculpt with the 3D Christmas Poinsettia Shaping Mold.

Adhere flowers and leaves as pictured.

Other Products: White Cardstock, Big Shot Machine, Glue Gun, Ribbon.

For more ideas on creating with the Elegant Gateway Dies and Accents, watch the tutorial at https://youtu.be/H6fZTiYUH_w.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Take two white cardstock size 5” x 7.75”. Score at 1.5” and on the longer side score at 1.5”, 6.25”. Cut tabs by cutting up to the horizontal scored line on the long edge. Apply glue to both short edge and long edge. Overlap the flaps on both long edges. Fold the score edges and basket is ready. Now adhere pattern paper from Festive Winterscapes Paper Collection HCDP – 2118 on all four sides. Cut two Lattice Swirl Gateway Die HCD2-7328 on white cardstock and adhere on the basket using Designer Dries Clear Adhesive. Add ribbon on the top attaching both the dies creating handle.

Stamp some poinsettia flowers and leaves on white cardstock using Christmas Poinsettia & Holly Cling Stamp Set HCPC-3881 using carnation red, leaf green inks and cut them with coordinating die. Color them with same ink, add Cosmic Brown Nuvo Mousse NU810 and shape them using 3D Christmas Poinsettia Shaping Mold. Add gold stamens at the centre. Arrange the composition as pictured.