Instructions:

Ready tent fold card measures 6" × 8". Cut a mat from designer paper collection measuring 5.75" × 7.75", adhere it on ready card base. Cut another mat from designer paper measures 4.5" × 7.75". Adhere it on white cardstock of same size, cut both large edges using shaped die from Curvy Decorative Border Die set. Cut 2 decorative border from white cardstock using die from the same set. Glue it on both edge of designer paper mat. Adhere this mat on card using dimensional tape. 

Cut a decorative oval from Gold Luxe cardstock using die from Oval Filigree Frame Die set. Cut a strip from white cardstock measuring 1" ×7.75" and a strip from designer paper measures 0.75" × 7.75". Glue both strips and oval diecut on card using dimensional tape as shown. Cut an oval piece from white cardstock using die from the same set, stamp sentiment on it using teal zeal memento ink. Distress edges with same ink and adhere it on card using dimensional tape. 

Stamp peacock image on neenah solar white cardstock using black memento ink. Paint using copic markers and cut with coordinating die. Glue it on card using foam dots. Stamp other image 4 times from the same stamp set on neenah solar white cardstock using black memento ink. Paint using copic markers and cut with coordinating die. Trim features from it. 

Stamp Garden Lily flower on deluxe flower shaping paper using magenta hue ink and sea grass ink.  Cut with coordinating dies and paint using same ink Stamp leaves using leaf green ink and paint with same ink. Shape flower and leaves using shaping mold. Pierce center of flower and add stamens. Stamp some leaves from Classic Rose and Wild Aster Spray stamp set using leaf green ink. Shape classic rose leaves using shaping mold. Arrange flowers and leaves on card using hot melted glue as shown. Add feather die cuts in floral arrangement. 

For finished look, apply Crystal Clear on flowers and leaves using Art Glitter  Dries Clear glue.

Other Products: Smooth White Cardstock, Neenah solar white cardstock, Copic Markers, Dimensional Tape ' Seagrass Archival

Instructions:

Cut a 5 x 7" white cardstock card base. Using the Rectangle Filigree Frames die, cut the large decorative die from dark teal patterned paper. Die cut the next smaller layer from light blue patterned paper. Adhere these layers together and to the card base. 

Die cut the smaller decorative die from white cardstock. Die cut the next smaller layer from dark teal patterned paper. Adhere these layers together, and then to the card using foam tape. Stamp the Happy Anniversary sentiment on white cardstock using grey ink (Close To My Heart- Whisper). Die cut out using the next smaller die image. Adhere to the card front. 

Stamp and die cut the small scroll from the Peaock and Posies set using an embossing pad and pink embossing powder (Cactus Flower). Add to the top of the sentiment piece using foam squares. Add gems to the middle of each flower. Add pink pearls around the large die cut piece. 

Other Products: Close To My Heart Ink (Whisper), Embossing Pad, Cactus Flower Embossing Powder, Teal Gems, Pink Pearls, Cardstock- White, Scrapbook Adhesives by 3L (Crafty Foam Tape, 3D Foam Squares, E-Z Runner Ultra, Dual Tip Glue Pen)

Instructions:

Card size: 5” x 6 7/8”. Make a shaped card using the outer die of the Rectangle Filigree Frame (see video). Cut another front using the same die from the teal decorative paper then glue it to the top of card base.

Cut a Decorative Heart including the inside decorative heart and word from silver cardstock. Cut another plain (scalloped heart) from white to lay under the silver for more contrast.  Glue the silver to the white then glue the word LOVE to the center. Set aside until after the next step.

Pop up the outer part of the silver Decorative Heart and adhere to the center of the card front. Now, glue the center white and silver heart flat inside. Add white pearls to the silver where desired.

Stamp Rustic Sunflowers (smallest size) using Majestic Violet then sponge with Cactus Flower, die cut, sponge the backs and edge the petals with Majestic Violet, Form in the mold. Glue 2 together for each flower, fill with Prills then glitter.

Stamp the Leafy Accents using Bamboo Leaves, sponge both sides with New Sprout, die cut, add a bit of violet to some leaves.  Brush with lacquer. 

Stamp both peacocks using black, die cut then color with chosen method (Copics used here). Pop both peacocks up over silver Decorative Heart, top and bottom. Arrange flowers and leaves top left and bottom right.

Optional: cut decorative paper for the inside to finish.

Other Products: White cardstock, pearls, white Painty Pen, Copic Markers: BG11, BG32, BG34, V04, V12, Y15, Y38, Y19, YG03, YG23, YG17,

Instructions:

Fold an 11” x 7.5” piece of black card at 5.5” to create the card base.

Cut a 7.25” x 5.25” yellow paper from the collection and die cut the large decorative filigree frame die from the centre. Cut a 7”x 5” green paper and layer these 3 pieces onto the card base.

Die cut a centre panel from the paper collection using the album tag and adhere to a die cut of the eyelet shape, adhere to the centre of the card base using foam pads. Die cut a yellow small filigree frame and cut into it to create corner pieces – adhere these to the top right and bottom left of the centre panel.

Stamp the holly berry spray onto flower shaping paper using bamboo leaves ink, die cut and snip into the shape to remove the holly leaves. Lightly shape using the flower shaping tools. Sponge with dries clear adhesive onto the swirls and leaves and sprinkle with transparent glitter.

Make the flowers: Stamp the small and medium sunflowers using Lilac posies ink onto flower shaping paper. Colour using the same ink and increasing the colour towards the centre. Add rhubarb stalk to the centre of the flower. Die cut and shape using the flower shaping tools. Place a dot of hot glue in the centre of each set of petals and cover with heart of gold prills, allow to cool and remove excess. 

Die cut the best wishes ornamental tag using yellow and black. Layer together, add yellow bakers twine and adhere to the centre of the panel – using a foam pad to lift the tag at the top.

Adhere the flowers and leaves to the  card base and add a few petite pollen stamens into the hot glue under the large floral.

Other Products: foam pads, hot glue, black card

Instructions:

Cut a piece of white cardstock to 10” x 6 1/4” and score in half at 5”. Cut a piece from sheet 4A of the HCDP1-2148 Ornate Peacock Paper Collection measuring 5” x 6 1/4” and adhere to the card front. Cut a piece of Luxe Gold Cardstock to 4 5/8” x 5 3/8” and a piece of white card stock to 4 1/2” x 5 3/4” and layer these two layers onto the card front. Next cut another piece from sheet 4A measuring 4 1/4 x 5 1/2” and glue it as well to the card front. Now take HCD3-7446 Slim Gateway Rectangle Die set and cut the inside die once from white and once Luxe Gold Cardstock. Then cut the die cuts into three segments and discard the middle section from both the white and gold. Layer each of the Luxe Gold Cardstock pieces onto the back of the white pieces slightly off set so that the gold shows at the edges. Add pieces of Adhesive foam strips to the back and attach these two die pieces together as shown forming a “gate look” as the focal to the card. To finish the gate, cut the three pieces needed to form the handle from the HCD1-7285 Window Hinges Die Set using Stampin’ Up! Crumb Cake cardstock, white cardstock, and Luxe Gold Cardstock. Add three mini gold brads through all 3 layers to finish the handle and attach it to the center of the gate with 3D foam dots.

From the HCPC-31014 Ornate Peacock Cling Stamp Set Stamp out 2 flourish stamps in Versacolor Pigment Ink onto Vellum Paper. (Designers Tip: Make sure to treat the vellum with an anti static tool prior to stamping for a cleaner embossing effect). Heat emboss with white embossing powder. Color on the back with HCDA2-450 Stack and Store Daubers in the Library Green Archival Ink for a light green glow. Now with the same ink and paper embossing technique stamp and emboss the smallest white Holly Hock flowers using HCPC-3999 Hollyhock Petals and Leaves Cling Stamp Set. Color them on the back with the daubers and Chrome Yellow Archival Ink. Next stamp the small flowers from the HCPC-3976 Curvy Floral Frame Cling Stamp Set onto white cardstock, using Manganese Blue, and color with Bluebird and Manganese Blue Archival Inks. Lastly stamp the leaves from the HCPC-3912 Cascading Wisteria Cling Stamp Set onto white cardstock, using English Ivy Archival ink and color using Leaf Green and English Ivy. Die cut all of the items above with their coordinating dies. Ink the tips of the leaves with the English Ivy ink. Hand shape both the leaves and the turquoise flowers using the Deluxe Flower Shaping Kit and the golf tools. To Complete the small yellow flowers run them through the coordinating 3D Hollyhock flower shaping mold and add a single white Bridal Bouquet Stamen into the center of them securing with a glue gun. To finish the Turquoise flowers, layer them as desired and add Lettuce Entertain You Prills to the centers. 

To complete the card, arrange the foliage towards the bottom of the gate with leaves first and sprays next. (Designers Tip: reserve a few leaves for the very end, it is always nice to have a few to add at the end if the arrangement doesn’t seem balanced) Then place the flowers. Stamp a sentiment from the HCPC-3848 Cheerful Note Sentiments Cling Stamp Set onto a piece of coordinating scrap paper and layer a piece of Luxe Gold Cardstock behind it. Add the sentiment to the card to finish the design. Complete the inside of the card as desired. 

Other Products: Stampin' UP! Crumb Cake Cardstock, Mini Gold Brads, Ranger Archival Inks in Library Green, Chrome Yellow, and Blue Bird, Glue Sticks and Glue Gun, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Cut Deluxe Flower Shaping paper to 5 1/2 x 7 1/2" size, score and fold at 7". Cut another piece of the cardstock to 7 x 5 1/2" and attach to the inside of the 1/2" fold to create card base. Using from the HCD1-7452 Ornate Window Die, cut the solid window opening from the front center of card as shown. Stamp the small peacock from HCPC-31015 Peacock & Posies Cling Stamp Set in Cactus Flower ink onto scrap paper, then onto bottom right of card. Repeat this step for the top left corner of card. 

Stamp the ornate window from HCPC-31016 Ornate Window Cling Stamp Set in Garden Patina ink and then Manganese Blue on some areas of stamp and onto Flower Shaping paper. Stamp this image a total of 5 times. Clean the stamp. Stamp 2x in white pigment ink onto the paper and heat emboss with white embossing powder. Repeat this step, but this time onto patterned paper (sheet 5B) from the Ornate Peacock paper collection. Use the coordinating die to diecut the window. You’ll need 4 of the outer blue stamped window frame and 1 of the ornate window header. You’ll need the window frame of the blue one and 2 panes of the white one. Diecut the solid window opening from top left of sheet 11A from the paper collection. 

Stamp the large peacock from HCPC-31014 Ornate Peacock Cling Stamp Set in Garden Patina ink and then Cactus Flower onto some areas of stamp and onto Flower Shaping paper. Stamp the small peacock from HCPC-31015 Peacock & Posies Cling Stamp Set onto vellum in white pigment ink and heat emboss with white embossing powder. Stamp the posy border from same stamp set onto vellum in white pigment ink and heat emboss with white embossing powder. Use coordinating dies to diecut the images.

Sponge the edges of card with Cactus Flower ink and then go over the same with Pink Peony. Lightly sponge the Garden Patina around the bottom right of card in the area that will surround the window. Add a touch of the Vivid Chartreuse next to it as well. Repeat this for the top left of card. Randomly sponge 1 of the blue window frames and header with white pigment ink and heat emboss with white embossing powder. For dimension, layer the other 3 frames on top of each other and then the embossed one at the very top. Layer the window header on the top. Sponge the edges of window frame with Garden Patina ink and same for the top of header. Add a touch of the Vivid Chartreuse in the body of window header. Lightly sponge the edges of 1 white window pane with Cactus Flower and Pink Peony ink and then the lightest touch of Garden Patina on the centers of pane. Use Garden Patina for the other window pane. For the patterned blue window, sponge the edges with Garden Patina ink and the solid window as well. Sponge the peacock, using the Garden Patina on body with touch of Vivid Chartreuse and Sunflower ink for the beak. Use Cactus Flower and Sunflower on the florals as well and Garden Patina and Vivid Chartreuse. Use the same colors for the vellum florals.

Cut apart the patterned blue window frame at an angle, then layer underneath the blue dimensional window frame so that it’s slightly offset. Dab some of the Dries Clear glue onto a yellow sponge and onto top left and bottom right of card, then sprinkle with Crystal Clear glitter. Attach the window frame in place on the card. Attach the solid window and blue pane through center opening onto inside of card. Cut into half the other pink pane and attach on the sides of window as shown. Shape the peacock and florals using the shaping stylus from the Deluxe Flower shaping kit. Stamp the ‘With all my Love’ sentiment in Cactus Flower onto scrap paper and then onto the Flower Shaping paper. Cut apart sentiment and sponge the edges with Garden Patina ink. Attach these onto card as shown. 

Other Products: Hot Glue, Hot Glue Gun, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Card size is 4 1/2 x 6”. Stamp Ornate Window onto Deluxe Flower Shaping paper using white ink and gold embossing powder. Diecut using window frame using 3 dies, the window frame outline die, inner die and windowpane die. Stamp another window using same ink colors, this time stamping on Luxe Gold cardstock, diecut with ornate arch die.

Cut Deluxe Flower Shaping paper to 9 x 6”, score at 4 1/2”. Cut paper from Ornate Peacock paper collection slightly smaller than card base, ink edges with Garden Patina ink, then use dauber to apply white ink along edge of panel, emboss with Bridal embossing powder. Heat set, then adhere using Dries Clear glue. On card front diecut windowpanes die using previously cut window as a placement guide. Stamp sentiment onto card base using both Leaf Green and Paradise Teal, then adhere windowpanes using Dries Clear glue and window frame using foam adhesive. Add gold window arch along top of window using foam adhesive.

Stamp peacock from Peacock and Posies stamp HCPC-31015 on inside of card base using a blend of ink colors, use Leaf Green, Paradise Teal and Vibrant Fuchsia. Color using daubers along with Garden Patina, Leaf Green, Vibrant Fuchsia and Sunflower ink. To get crisp coloring, you can create a mask with the die and place it onto the image to prevent your dauber from going outside the stamped image. Use same stamp to stamp onto Luxe Gold cardstock using white ink and gold embossing powder. Heat Set.

Stamp floral accent from Ornate Peacock stamp set HCPC-31014 twice using a blend of inks. Use Leaf Green ink, Paradise Teal and Vibrant Fuchsia inks. Diecut using coordinating dies. Color flourishes using Vibrant Fuchsia, Leaf Green and Garden Patina ink. Use Hydra Sponge to apply Crystal Lacquer onto flourishes, allow to dry. Once dry, shape using Deluxe Flower Shaping Kit. Use scissors to trim apart feathers and flourish as shown and adhere on each side of window.

Finish with Baby’s Breath Glitter for that added sparkle.

Other Products: Foam Adhesive, Diecutting Machine, Scissors

Instructions:

Make a folding card base by using shadow die of Ornate Window from Ornate Peacock Collection on off-white card stock. Die cut the 3 window shapes on deluxe and adhere on the card front and 2 shapes inside the card base using clear glue, die cut the shadow shape of window on the designer paper from Ornate peacock paper collection 3x and adhere on the deluxe panels.

Stamp the image of window on the desinger paper using versamark imbossing ink, cover the images with copper embossing powder and heat it using heating tool. Die cut the images using coordinating dies, add clear card from the back side, add foam strips on the edges also from the back side of window. Put some sequins on the card front and add this window on the card base.

Stamp the image of window on the dark green desinger paper using versamark imbossing ink cover the images with copper embossing powder and heat it using heating tool, die cut the images using window border coordinating die and adhere on the window.

Stamp the small image of peacock on the vellum using versamark embossing ink cover the image with golden tinsle embossing powder and heat it using heating tool. Die cut the image using coordinating die, die cut small peacock shadow image on the deluxe card and add vellum peacock image on it using clear glue.

For the small flowers, Stamp the Zinnia flower images from large Garden Zinnia Cling Stamp Set using versamark Embossing ink, cover the images with white embossing powder on mint card. Heat it using heating tool, die cut the images using coordinating dies, color the centers of zinnia with Salvage patina ink using daubers, use shaping stylus and Groove Golf shaping tool to shape the petals from back. Use hot glue to assemble the flowers as shown. For the centers, add pearls using hot glue. Dab some Dries Clear glue onto a sponge, apply over the petals as desired, sprinkle with Nida Tanweer Glitter Powder and tap off.

Add Peacock and flowers to the bottom right corner using hot glue.

Stamp the sentiment from friendship sentiments stamp set using forget me not ink, trim the sentiment using single line window die from the same ornate window collection and add sentiment inside the card.

Embellish peacock with rhinestones.

Other Products: Vellum Card, Mint Cardstock, Off-white Card stock, Hot Glue Gun, Nida Tanweer Magic Glitter Powder, Pearls, Rhinestones, Versamark embossing Ink, Salvage Patina Ink, Golden Tinsel Embossing Powder, Copper Tinsel Embossing Powder, Sequins.

Instructions:

Create a 5 x 7 inch card base in white cardstock. Cut a 4.5x6.5 piece of green paper from the Ornate Peacock Paper Collection and adhere to card front. Cut the frame from the Decorative Heart Die in white card stock and adhere to card front. 

Stamp the peacock from the Ornate Peacock Cling Stamp Set and the window x2 from the Ornate Window Cling Stamp Set in Jet Black. Sponge the window frame of one window with Rich Cocoa, and the inner window and top flourish of the other window with Rich Cocoa and Tea Rose (top flourish), cut out with coordinating dies. Cut out additional window pieces in white cardstock and adhere for further dimension.  Add glitter and adhere to the center of the card. Color the peacock with Zig Markers, cut out with coordinating dies, add glitter and adhere to the middle bar of the window.

Stamp the clematis from the Clematis Cling Stamp Set in Vibrant Fuchsia, sponge with Vibrant Fuchsia and Vivid Chartreuse, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold, add stamen and glitter. Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, sponge with Vivid Chartreuse, cut out with coordinating dies, sculpt with 3D Leafy Accents Shaping Mold and add glitter.

Stamp the sentiment from the Celebrate Love Sentiments Cling Stamp Set in Jet Black on white cardstock and cut out with the Arrows and Banner Die.

Adhere flowers, foliage and sentiment as pictured.  

Other Products: White cardstock

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 8” x 9”, score at 4” along the 8” side and fold to create a base card of 4” x 9”. Cut a piece of gold cardstock 3 7/8’ x 8 7/8” and adhere to the front of the card. Cut a piece of pattern paper 3 3/4” x 8 3/4” and adhere to the front of the gold cardstock.

Die cut two decoratie edges from the HCD3-7449 Slim Eyelet Heart Rectangle Die out of Deluxe Flower Shaping Paper. Adhere the two die cuts together, add Frosting Powder with Dries Clear glue on a dry sponge and then adhere to the front of the card.  Die cut the eyelet rectangle out of gold cardstock using the No. 2 die from the HCD3-7449 Slim Eyelet Heart Rectangle Die. Die cut a plain rectangle out of green pattern paper using the No. 3 die from the HCD3-7449 Slim Eyelet Heart Rectangle Die and adhere over the gold eyelet rectangle. Die cut the white eyelet rectangle using the No. 4 die from the HCD3-7449 Slim Eyelet Heart Rectangle Die out of Deluxe Flower Shaping Paper and adhere to the front of the green paper. Die cut the plain rectangle out of pale blue pattern paper using the No 4 die from the HCD3-7449 Slim Eyelet Heart Rectangle Die and adhere to the front of the white eyelet rectangle.

Stamp the peacock from the HCPC-31015 Peacock & Posies Cling Stamp Set and the posy flourish from the HCPC-31014 Ornate Peacock Cling Stamp Set on Iris cardstock with Jet Black ink. Colour the images using Zig Clean Colour Real Brush Markers and die cut with the coordinating dies.  Adhere the peacock to the bottom left and the posy flourish to the top right with foam tape. Add Heart of Gold Prills to the centres of the flowers and Micro Mini Pearl Beads to the flowers. Add Crystal Clear glitter to the centres of the feathers with Dries Clear glue.

Die cut three sentiments using the sentiment die from the HCD3-7449 Slim Eyelet Heart Rectangle Die - two from Deluxe Flower Shaping Paper and one from gold cardstock.  Stack the three die cuts together with the gold die cut on top and then adhere to the centre of the card as shown.

Other Products: Iris cardstock, foam tape, Dress My Craft Micro Mini Pearl Beads,

Instructions:

The finished card measures 4 1/2 x 6 inches. Cut one piece of white cardstock in deluxe flower shaping paper 9 by 6 inches and score at 4 1/2 inches to make a side fold card. Cut a 4 1/4 x 5 3/4 inches yellow paper #6B and glue it on the card base. Also glue on a card base a white paper 4 x 5 1/2 inches and a pattern paper #4B 3 3/4 x 5 1/4 inches. Cut a vellum paper 3 1/2 x 5 14 inches and rip the top and the bottom and glue it over the card base. 

Stamp your Lily flowers with Magenta Hue ink onto white flower shaping paper, color the center and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens. With a brush add a little bit of 3D crystal lacquer on your flowers. Add glue on the tips of the flowers and dip it into crystal clear powder. Redo the same thing to make other flowers in sunflower ink color.

Also stamp leaves with leaf green and color the center with a bit of librairy green ink. Diecut and use the mold to give shape to yours leaves.

Stamp in magenta hue sentiment from the Friendship sentiments cling stamp set in a 2 1/4  x 3/4 inch piece of Deluxe shaping paper. Ink the edge with the same color.

Put cheesecloth and sewing thread on your card.  Make a bouquet arrangement on it and add the sentiment on the corner with 3D foam.  For the final touch, add lace and ribbon through your bouquet.

Other Products: Die cutting machine, library green archival ink, hot glue gun, scissors, water mister, cheesecloth, sewing thread, ribbon, lace

Instructions:

Create base: fold paper and using Slim Ornate Rectangle Die, cut from white cardstock, using this same die cut from paper collection paper and place into card. Cut using Slim Ornate Rectangle Die from paper collection and silver paper glue it together and place on the card using adhesive foam strips.

Stamp Peaccok on the white paper using Peacock & Posies Cling Stamp Set with Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Colour with pencils. Place onto the card using adhesive foam strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Vibrant Fuchsia and cut using the coordinating dies. You will need 2 petals of each to create flowers, for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Vibrant Fuchsia using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add a little glue around stamens and sprinkle prills, leave it to dry.  Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves stamp the Clematis Cling Stamp Set and on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade using this same ink and shape leaves using mold. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Cut sentiment from Slim Ornate Rectangle Die and place onto the card using glue. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Card size is 5 x 7”. Score and fold 5 x 12” Deluxe Flower Shaping Paper at 6” and burnish well. Using the second largest Oval Filigree Frame Die, which is the plain die, place it about 1/2” over the fold and diecut to create the card base. Diecut the largest die from the set 3x, twice from white cardstock and once from Luxe Gold cardstock. Adhere the two white ones together to make a sturdier piece and then adhere to the gold diecut a little offset. Adhere this to the card front. Using the plain oval die, cut 3x, once from white cardstock and twice from Luxe Gold cardstock. Adhere the two gold ovals together slightly offset and adhere to the card front. Place the white oval in an embossing folder, run through the diecutting machine and adhere to the card front. Cut another piece of white cardstock using the plain oval die, trim the top and adhere to the inside of the card. This will make it a little sturdier to balance the heavier card front. Using the third largest Filigree Frame Die, cut 2x, once from white cardstock and once from Luxe Gold cardstock. Stamp the ‘Hope your day is as Special as you are’ on the white diecut using Archival Forget-Me-Not ink, adhere to the gold diecut slightly offset and adhere to the inside of the card. 

Stamp the beautiful peacock and the flourish from Peacock and Posies Cling Stamp set on white watercolor cardstock using VersaMark ink, cover with Ranger Gold Super Fine Detail Embossing Powder and heat set using the Heat It tool. Diecut using the coordinating die and color using Zig Clean Color Real Brush markers – Fl. Green, Yellow, Persian Green and Dark Pink. Diecut each once more from white cardstock and adhere behind the stamped images for stability. Lightly shape the images using the Deluxe Flower Shaping kit. Adhere the images to the card front as shown using dimensional squares and dries clear adhesive.

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Vibrant Fuchsia ink. Color the fronts and the backs using the same ink, diecut using the coordinating dies and shape using the 3D Clematis Mold. Add additional shaping using the Deluxe Flower Shaping kit. Adhere two petals of the same size together to create each flower and create one large and three small flowers. Pierce the flower centers and add Bridal Bouquet stamens using hot glue. Stamp the Garden Lily leaves on Deluxe Flower Shaping Paper using English Ivy Archival ink, color the fronts and backs with the same color, diecut using the coordinating die, add additional ink to the edges and shape in the 3D Lily mold. Using a paint brush, add dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Adhere the flowers and leaves to the bottom right of the Filigree Oval. 

Other Products: White Cardstock, Strathmore Vellum Surface Cardstock, Diecutting Machine, Hot Glue Gun, VersaMark, Ranger Gold Super Fine Detail Embossing Powder, Dimensional Squares, Misti Stamp Positioner, Paper Trimmer, Funnel Tray

Instructions:

To make the card base, take a sheet of white cardstock measuring 9 x 9 1/2 inches, score and fold along the short side into half to create a base measuring 9 1/2 x 4 1/2. Using the sheets from HCDP1-2147 Garden Lily Paper Collection, cut 2 pieces of the pink pattern paper to size 1/4 inch less than the card base and adhere them to the front and inside panels. 

Cut another piece of a pattern paper with the outline die of HCD3-7448 Slim Ornate Rectangle Die and adhere it to the card front using dimensional tape. Using the decorative frame dies, cut twice using each of the dies with white cardstock and one time with Luxe Gold cardstock. Stack and glue 2 each of the white cardstock pieces with the gold die-cut piece underneath it slightly off-centered. Cut and adhere a light blue pattern paper to the inner most frame using the coordinating die. 

Adhere the ready die-cuts on the card front to the outline die-cut piece and layer the inner most frame as well with dimensional tape. Stamp and gold heat emboss twice with HCPC-31013 Garden Lily Bouquet & Buds Cling Stamp Set onto white cardstock and color using water-colors. Cut the images using the coordinating die and add some Clementine Ultrafine glitter by sponging some dries clear glue. 

Stamp the sentiment onto white cardstock with Wilted Violet oxide ink and cut using the tag die. Add another layer of Gold cardstock die-cut giving a thin frame around the sentiment piece. Arrange all the ready elements on the card front using dimensional tape as shown and finish off the card by adding some White flat-back pearls around the arrangement.

Other Products: Dimensional adhesive, funnel tray, scissors, paper trimmer, scoring board, die cutting machine, Versamark ink, White flat-back pearls, Wilted Violet distress oxide ink, watercolors, water color brushes

Instructions:

Fold white cardstock to 4.5  x 9 " to get a slim base. Cut a piece of patterned paper from the Ornate Peacock Paper Collection to 9 2/16 x 4 1/4". Cut out a frame with die No.1 from the Slim Ornate Rectangle Die from the Ornate Peacock Paper Collection. Cut out a gold and a white frame with the die No. 2 from the Slim Ornate Rectangle Die set. Cut out a white and a patterned frame with dies No. 3 and 4 from the Slim Elegant Rectangle Die set. Stamp the sentiment with Elegant Rose Sentiments Cling Stamp Set in Magenta Hue and cut it out. Adhere all elements to the base as pictured.

Stamp blossoms from the Garden Lily Cling Stamp Set in Magenta Hue and French Ultramarine inks onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink, diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower and Magenta Hue inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 5 posies from the Peacock & Posies Cling Stamp Set and Ornate Peacock Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp a peacock from the Peacock & Posies Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

Cut a piece of white cardstock to 16 x 5 3/4", score at 5 3/4" – 6 3/4" – 7 3/4" – 13.5" – 14.5"  – 15.5" then fold to get a base as pictured. Narrow folded pieces will be sides of the base. Cut a piece of paper from Ornate Peacock Paper Collection to 5 7/16 x 5 7/16 ", adhere it to the front panel of the base. In the front panel cut out a window with a die No. 2 from the Ornate Window Die, adhere a piece of clear cardstock at this window. Add adhesive foam strips around the window to make a shaker box. Cut a piece of paper from Ornate Peacock Paper Collection to 4.5 x 5 ", and a little bigger piece of the white cardstock, adhere them together. Take them and cut out a window with a die No. 2 from the Ornate Window Die. Stamp a window with the Ornate Window Cling Stamp Set in Magenta Hue ink, repeat it 3 times, color them slightly. Cut out 3 windows and a decor with dies from the Ornate Window Die as pictured and adhere them at the top of the shaker box. Adhere a piece of clear cardstock at the top window. Add adhesive foam strips around the window to make a shaker box. Add some sequins and adhere the top of the window and adhere all elements. Cut out  white and gold decors from the Rectangle Filigree Frame Die set. Adhere all elements to the base. Stamp the sentiment in Magenta Hue ink using Celebrate Love Sentiments stamp and cut it out. 

Open the base. Cut a piece of paper from Ornate Peacock Paper Collection to 5 7/16 x 5 7/16 ", adhere it to the back panel of the base. Cut 2 pieces of paper from Ornate Peacock Paper Collection to 2.5 x 5 3/4" and 3 x 5 3/4", cut out their edges with die from the Curvy Decorative Border Die, adhere inside of the card. Stamp 4 posies from the Peacock & Posies Cling Stamp Set and Ornate Peacock Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Stamp a peacock from the Peacock & Posies Cling Stamp Set in Tuxedo Black ink, color it and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements inside of the card as pictured. Adhere card to close the base.

Stamp blossoms from the Garden Lily Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Sunflower ink. Stamp blossoms from the Garden Lily Cling Stamp Set in French Ultramarine ink onto Deluxe Flower Shaping Paper, color their edges with the same ink and their centers with the Leaf Green ink. Diecut with coordinating dies and shape with mold. Add Petite Pollen Stamens to all lilies. Stamp blossoms from Lush Lilac Stamp Set in Cactus Flower and Magenta Hue inks onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills. Stamp 3 branches from Leafy Accents Cling Stamp Set in Fern Green ink, color them with Leaf Green ink, cut out with coordinating die and shape with coordinating mold. Stamp 5 posies from the Peacock & Posies Cling Stamp Set and Ornate Peacock Cling Stamp Set in Tuxedo Black ink, color them and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers. Add some self-adhesive crystals.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, colored pencils, self-adhesive crystals

Instructions:

For this 6 1/4" x 4 1/4" Ornate Window card, die cut the Ornate Window using the Ornate Window Die Set, by taping the outside edge of the Window die slightly over the folded edge of a 6" x 4" card, with low tack tape. Die cut another Ornate Window in blue paper from the Ornate Peacock Paper Collection. Adhere to card front with Designer Dries Clear Adhesive. Die cut an Ornate Window outside edge in Flower Shaping Paper. Die cut the inner frame piece and die cut out the windows. Adhere the inner frame to the window. Adhere to card front with foam tape. Stamp onto Flower Shaping Paper another Ornate Window in Memento Danube Blue ink. Die cut the inner windows out. Die cut the inner window frame in Clear Cardstock, adhere to the back of the Ornate Window with Dries Clear Glue. Adhere to front of card with foam tape.

Die cut the outside edge of the Slim Gateway Rectangle die from the Slim Gateway Rectangle Die Set, in blue paper from the paper collection. Die cut the inner edge in white card. Adhere to blue paper. Cut off the bottom section. Adhere to back of the Ornate Window Card.

Stamp the large Peacock from the Ornate Peacock Cling Stamp Set in Memento - Blue Danube ink. Color with Ranger Archival Vibrant Fuschia, Forget-Me-Not and Blue Danube inks using Daubers. Add a little yellow ink to the beak. Die cut with the matching die. Die cut another large Peacock in Flower Shaping Paper, glue the two together. Adhere to Window with foam tape. Stamp the long Posie from the Peacock and Posies Cling Stamp Set, in Blue Danube ink. Color with Blue Danube, Forget-Me-Not and Vibrant Fuschia inks using Daubers. Die cut with the matching die. Adhere to side of Ornate Window.

Add small white pearls to the flowers. Sponge Dries Clear Adhesive onto Peacock and flowers, add clear glitter. All done. 

Other Products: Low tack tape, 6" x 4" card blank, foam tape, white card, yellow ink, small white pearls, clear glitter.

Instructions:

My finished card size is 4 1/4" x 5 1/2".  Make card base and cut 1 1/2" off the front flap giving you a piece of cardstock 1 1/2" x 5 1/2". Score at 4 1/4" and glue this piece to the inside of the card. This piece comes across the front of the card to act as a closure. I added the magnets onto the closing flap and covered with the decorative paper and onto the card front and covered that as well. (This type of card tends to fall open and it is a pet peeve of mine so I just use the magnets to take care of this.) Cover the card with pieces of the paper collection, I used pieces of Sheet 10A. For the sentiment I used a scrap of Sheet 3A and stamped the sentiment then I cut out the sentiment using the Arrows and Banner Die.  I adhered it to the closing flap using dimensional tape.

Stamp the Garden Lily flower petals using Sap Green ink and cut out using coordinating dies. Layer onto mold, spritz with water and run through the die cut machine. Use two petals per flower and poke a hole in center and add the stamen and hot glue to hold into place. Stamp the Leafy Accent leaves with Leaf Green ink and color with same then cut out with coordinating die. Lay onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry.

When everything is dry decide on placement of flowers and leaves and hot glue down. The card is finished!

Other Products: Sap Green Archival Ink, White Cardstock, Die Cut Machine, Dimensional Tape, Hot Glue Gun

Instructions:

Cut out the white base of the card and fold it to 5 3/4" x 8". From paper collection cut a slightly smaller rectangle and glue to the base. Then cut a 5 1/2" x 7 1/2" rectangle out of white paper and a slightly smaller rectangle from the paper collection, adhere it the with Double Dots 100 pc. -3D.

Cut out a frame from the Rectangle Filigree Frame Die set from white paper and glue it to the card. Then, from the same set, cut a slightly smaller frame from the paper collection. Glue as shown.

Stamp element from the Ornate Window Cling Stamp set with black ink on white paper, color it with Memento Toffe Crunch ink. Then cut out with a matching die. Cut out the outer frame of the shutter windows from the paper collection, glue underneath the window. Stamp with black ink the sentiment in the window from the Cheerful Note Sentiments set.

Stamp elements from the Ornate Peacock set with black ink on white paper, color it with blue, green, red and yellow ink using Stack and Store Daubers. Then cut out with a matching die.

Glue everything as shown.Cover the elements of the peacock's tail with glue and glitter.

Other Products: Die cutting machine

Instructions:

Make a slim line card base using white card stock. Cut a piece of white card stock 9" x  9" and score at 4 1/2" inches. Fold to make a 9 x 4 1/2" slim line card base. Cut a piece of the pink pattern paper a little smaller than the card base and adhere on the card front. Cut yellow background pattern paper a little smaller than the deep pink mat layer and adhere on the card front.

Cut two pieces of die cut from the slim gateway rectangle die using gold and white cart stock. Trim the die cuts in such a manner to get 3 ornate die cuts and adhere them on the card front off setting a little.

Cut gold and white labels using the inner most dies from the slim elegant rectangular die set. Stamp the sentiment on the smaller white label.

Stamp the lily flowers with pink peony ink on white deluxe flower shaping paper and colour with magenta hue, rose madder and little sunflower ink and die cut. Shape the flowers in the 3D flower shaping mold and adhere two flowers together. Add the petite pollens stamens in the centre to make the flowers.

Stamp the leaves, colour them using Archival ink and die cut. Shape  them in the flower shaping mold. Add the flowers and the leaves together on the card front around the label.

Stamp the peacock feathers image with jet black ink on white card stock and colour with Zig markers. Cut with matching die and add to the card around the Lily arrangement.

Other Products: Die cutting machine, scoring board, hot glue gun and sticks

Instructions:

Score a 9" x 8" piece of deluxe flower shaping paper at 4" and fold at the score line to create a 9" x 4" card base. Die cut a piece of patten paper from Garden Lily Paper Collection using the die from Slim Elegant Rectangle Die. Use the die from same die set to die cut a piece of white cardstock. Cut a piece of pattern paper from the same paper collection to fit inside the white die cut. Adhere all the die cuts on the card base as shown.

Die cut 4 sets of white cardstock using the sentiment die from the same die set and adhere them together. Colour the topmost die cuts with brustro pearl gold metallic watercolor. Adhere them on vellum, trim them and then adhere them on the card as shown.

Stamp the images from Garden Lily Cling Stamp set on a piece of Art Foam Paper with Olive, Coastal Coral and Carnation Red archival inks and die cut them using matching dies from Garden Lily Die. Color them using Leaf Green, Sunflower, Coastal Coral and Carnation Red archival inks. Heat the pieces using a hot clothes iron then shape them using your hands and Deluxe flower shaping kit. Add a few red Rock Candy Stamens to the flower centers. Arrange and adhere the flowers and leaves on the card base as shown.

Add few rhinestones to the die cut to add finishing touch.

Other Products: Get Inspired Vellum, Brustro metallic watercolours, clothes iron, hot glue gun and rhinestones

Instructions:

Create a top fold card measuring 9 1/2” x 4 1/2” Choose a designer paper from Rustic Sunflower Paper Collection and cut it to the size 9 1/4” x 4 1/4”. Adhere it on white card base.

Cut 3 pieces of slim rectangle frames, 2 from white cardstock and 1 from Luxe gold card stock using Slim Elegant Rectangle Die and glue them together keeping the white die cuts on the top and gold one a little offset. Cut the solid rectangle from the same paper collection and glue it on the back. Cut the inner frames in Luxe Gold card stock and designer paper using same die set. Layer all these die cuts on the card as shown. Stamp the sentiment from Celebrate Love Sentiments Cling Stamp Set on the smallest frame die cut using Night sky archival ink.

For the flowers, stamp flower images from Rustic Sunflower Cling Stamp Set on the Deluxe flower shaping paper using Brushed Corduroy distress oxide ink and Leaf Green archival ink and color them using Sunflower archival ink and Goldenrod archival ink. Stamp the leaves from Leafy Accents stamp set on Deluxe Flower Shaping paper with Archival Fern Green ink and color them using Archival Leaf Green ink and Archival Vivid Chartreuse ink. Cut the flowers and leaves using their coordinating dies and shape them using coordinating 3D shaping mold.

Stamp the butterfly image from Delightful Daffodil & Butterfly Cling Stamp Set with VersaMark on Rajni Chawla’s Vellum Flowerite and sprinkle gold heat embossing powder. Dust extras and heat set the image using a heat tool. Cut the butterfly using its coordinating die. Shape the butterfly using Deluxe Flower Shaping Kit.

Once all the elements are ready, decorate the card using prepared flowers, leaves and butterfly as  pictured. For final look, apply Crystal Clear powder to the flowers using Art glitter dries clear glue.

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Rangers Golden Heat Embossing Powder, Heat gun, Brushed Corduroy distress oxide ink, Versamark ink pad.

Instructions:

Prepare a Slim Line card 4 1/2 x 9” from white card stock. Use the largest die from the Slim Eyelet rectangle Die set and cut out the Gold card stock, add to the card, Cut the next out of white using the 2nd die from the Slim Elegant Rectangle die set, add on top of the gold. Use the 3rd die from the Eyelet Rectangle and cut out a piece of the Ornate Peacock paper, add to the center of the card. Usie dies 3 and 4 from that set and cut out a frame with white card stock, add slightly at an angel on top.

Stamp the Leafy Accent leaves on white with the Cottage Ivy, color with the Vivid Chartreuse. Cut out with the coordinating die. Highlight the edges with more of the Cottage Ivy, place in the matching mold and run through the die cut machine to shape.

Stamp the Rustic Sunflowers on white with Tiger Lily ink, color with Sunflower. Cut out with the coordinating die. Highlight the edges with more of the Tiger Lily ink, place in the matching mold and run through the die cut machine to shape. Put 2 together making one flower, add the stamens in the center of each flower.

To finish, add glitter to all leaves and flowers.

Other Products: Paper trimmer, die cut machine,