Instructions:

Create a square card base 5 11/16 x 5 11/16" from white cardstock. Cut a piece of patterned paper from the Festive Poinsettia Paper Collection to 5 9/16 x 5 9/16". Cut a piece of patterned paper from the Festive Poinsettia Paper Collection to 5 5/16 x 5 5/16" and a little bigger piece of white paper, adhere together. Cut out a white frame with the Rounded Window Frame Die no. 3 and no. 4. Use dimensional adhesive and glue all of them as pictured. Stamp the sentiment with Festive Winterscapes Cling Stamp Set in Red Geranium and cut it out.

Stamp blossoms from Small Festive Poinsettia Cling Stamp Set and Large Festive Poinsettia Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping paper, color them with Lady Bug ink, diecut with coordinating dies. You'll need 9 blossoms. Stamp 2 holly leaves and 2 branches from the Large Festive Poinsettia Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die. Shape all flowers, branches and leaves using their coordinating shaping molds. Add some Stop Whining prills to the centers of flowers.

Stamp 2 big and 1 smaller branch from the Holly Berry Spray Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating dies. Stamp 4 the smallest branches from the Holly Berry Spray Cling Stamp Set in Lady Bug ink and cut out with coordinating die. Stamp birds from the Clematis Birdhouse & Trellis Cling Stamp Set in Tuxedo Black ink, color them with promarkers and cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

Add some self-adhesive pearls. To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, promarkers, sisal, self-adhesive pearls

Instructions:

Other Products: Embroidery hoop 8", Flat back pearl, Ribbon, Burlap, Chipboard Sentiment, Wow glitter, Distress Inkpad (Festive Berries), Vellum Paper

Instructions:

Other Products: Smooth White Cardstock, Pearls, Wow red glitter, watercolor paper, Festive Berries Distress Inkpad

Instructions:

Make a 7” x 5 “ vertical top folding card base from white card stock. Cut a card panel 7 1/2” x 5” and score at the 1/2” mark on the longer side, Fold the flap. Cut another card piece 7” x 5” and adhere this to the flap to make the card base.

Cut a plaid design pattern paper from the Festive Poinsettia paper collection to size 4 3/4 “ x 6 3/4” and adhere to the card base. Cut a piece of red card stock 7” x 5” and adhere to the card front in a slightly tilted manner using dimensional tape.

Cut a pattern paper with green script background from the paper collection, a little smaller than the red card panel. Tear around 3” deeper inside from the right side and roll the torn edges to form a v-shape. Cut a piece of country side design from the pattern paper and add to the back of the green paper. Adhere this whole piece on the red paper.

Stamp the Poinsettia flower image 3-4 times with Red Geranium ink on deluxe flower shaping paper and colour using the Red Geranium ink, Carnation red ink and Plum. Cut with the Small Poinsettia flower die set. Shape the flowers in the 3D small poinsettia flower shaping mold. Make a bunch of assorted stamens. Layer two big and one small flower together with glue, make a big hole in the center and add the stamens.

Stamp the leaves and the berry branches with swirl on the deluxe flower shaping paper using Library Green ink. Colour with green archival inks and cut with coordinating die set. Shape the leaves in the 3D flower shaping mold.

Stamp the swirl berry branch on Luxe gold card stock using clear embossing ink and add gold embossing powder. Heat set with heat tool. Cut with matching die .

Stamp the berries in Carnation red ink on flower shaping paper and cut with matching die. Shape them with ball tool. Add the berries on the card front with the flowers. Add glossy accents on them and let it dry.

Arrange the flowers, leaves and berry branches with gold die cuts on the card front.

Stamp a greeting from the Candy Cane cottage cling stamp and add to the card front.
Apply glitter powder with clear glue to finish the card.

Other Products: Versamark clear embossing ink, dimensional tape , red card stock, scoring board, die cutting machine, glossy accents

Instructions:

Card size: 6 1/2 x 7 1/2" (overall with décor hanging over edges). Start with top fold white card stock measuring 4 x 5” (folded), Place the Urn die over the folded top so that top edge cutting line is just above the fold. Stamp and die cut another urn from decorative gold paper, color shadows then glue it to the folded urn card base. Sponge inside of card base with Scattered Straw Distress Ink.

Die cut the Starry Night decorative die from white 2 times, then glue them together (for strength). Glue the bottom of the die cut to the top of the urn in front so that card can be fully opened. Sponge top of Starry Night die cut with Scattered Straw Ink.

Stamp several poinsettia blossoms in 4 sizes using Vermillion Ink then sponge with Carnation Red Ink, also highlight with some Scattered Straw ink. Stamp the Stamen in red and Scattered Straw in all the sizes, sponge with Scattered Straw, these will make their own little “different” flowers. Stamp the leaves and sprays with Library Green, sponge with Fern Green and Leaf Green. Die cut then place in the Shaping Mold (see video) to shape flowers and leaves. Shape the sprays from the back with the Deluxe Flower Shaping Kit.

For the poinsettia, glue 2 to 4 layers together to make flowers and insert yellow pearl stamen. For the “different” flowers, glue 2 to 3 layers of the stamped stamens together either mixed red and scattered Straw or just 1 or the other to form little rounded petal flowers. Insert red pearl stamen in each center.

Place some waxed paper or plastic under the starry night die (because of the large openings) while gluing flowers, leaves and sprays on to make a bouquet in the urn. Start with the sprays in front and around edges of urn and Starry Night die cut, then add poinsettia, leaves and small gold flowers. Insert Rose Hip Stamen in gold and red colors to add to the overall look of the bouquet. Cut pieces of gauze and spread them/fray them then tuck them into the bouquet here and there. Glitter all the flowers.

Stamp the sentiment on white cardstock using Vermillion ink then die cut with the small tag in Ticket and Tags Die. Sponge the edges with Scattered Straw. Stamp the cardinal using Tuxedo Black Memento then color and die cut. Cut off other bird and greenery then glue it onto the spray at top right side of bouquet.

Make a multi-loop bow from red ribbon (dyed seam binding used in this sample [using a refill ink bottle and a tiny bit of water in a zip-lock bag with the seam binding], purposely left crinkled). Glue it under some foliage but on top of the tag on the left side (to balance with bird on the top right).

Mix tiny a bit of Shimmer additive with lacquer then paint it onto the greenery.

Other Products: White cardstock, Gauze, ribbon dyed with red refill, Scattered Straw Distress Ink, Acrylic Shimmer Additive

Instructions:

Card size: 4 3/4 x 6 3/4". Cut the shaped base by placing outer die of the Royal Elegance Frames die hanging over the top fold of a 5 x 7” folded white cardstock (7 x 10” folded), die hangs over fold about 3/8”. Cut another card front from white and from decorative paper red. Cut the next 2 dies in the set from the Sweet Magnolia light raspberry colored decorative paper. Cut 2 ovals from Fun Foam then use 1 of them under the decorative oval die cut. Cut the inner oval (2 3/8” wide) from decorative paper with the winter cottage on it. Glue the other foam oval under the winter scene and then glue all layers to the card front from large to small.

Stamp the Snowman from Countryside Winter'scapes using black Memento Ink, die cut then color with Copic Markers. Pop snowman up over scene at the right side of oval. Stamp Merry Christmas from Festive Winter'scapes Using Carnation Red on vellum, trim it, then fishtail the ends and glue it to the top of winter oval (use glue in places where it won’t show like under stamped area).

Stamp the poinsettia from Small Festive Poinsettia (4 small and 2 medium) using Vermillion ink then sponge with Carnation Red, use Scattered Straw Ink on the stamen. Stamp the leaves from Large Festive Poinsettias and from the small Festive Poinsettias using Library Green, sponge with Fern Green and Leaf Green, die cut. Shape flowers and leaves in the Shaping Molds. For each flower glue 2 of each size together. Glue the stamped stamen in the centers in sets of 2.

Arrange the flowers and the leaves around left side of winter scene. Glitter all the flowers and card. Glitter snow areas on winter scene and on snowman.

Mix lacquer and Shimmer together and paint it on the leaves.

Other Products: White cardstock, Acrylic Shimmer Additive, Fun Foam, Scattered Straw Distress Ink, Copic Markers: C7, C5, C3, R43, R24, RV29, YR04, YG63, G14, E53, E33, E35, BG10, BG11, BV20, YR24, Y21

Instructions:

Card measures - 5” inches by 7” inches. To create the card base - cut out 10” x 7” piece of HCPP1-438-2 white card and score it at 5” (long side up) to create a card base. Fold using a bone folder along the score lines. Cut out 5” x 7” piece of HCGP1-488 Luxe Gold Cardstock and adhere it to the card front. Cut out 4 7/8” x 6 7/8” piece of HCDP1-2129 Festive Poinsettia Paper Collection, ink the edges with TSMP701 Memento Dye Ink Pad - Cottage Ivy using HCDA1-449 daubers, then die cut it using HCD1-7213 Elegant Pocket Accents and adhere final piece to the card front as shown.

Stamp the urn from HCPC-3931 Large Floral Urn Cling Stamp Set on HCGP1-488 Luxe Gold Cardstock with Tsukineko Versamark ink, sprinkle it with WOW! ‘Ho Ho Ho’ embossing powder, and heat emboss it using a Heat Gun. Die cut it using a matching Large Floral Urn Die HCD1-7329, add an additional layer of white card underneath and adhere the final piece to the card front using 3D foam.

Stamp decorative cluster of HCPC-3959 Holly Berry Spray Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP701 Memento Dye Ink Pad - Cottage Ivy, then colour it with the same ink using HCDA1-449 daubers. Die cut them with matching HCD1-7360 Holly Berry Spray Die. Using Metal tip apply Designer Dries Clear Adhesive on selected areas and sprinkle them with Red Glitter. Apply Prima ‘Firebird’ wax on selected areas and adhere final pieces to the card front as shown.

Stamp large flowers and holly leaves from HCPC-3957 Large Festive Poinsettia Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper - use TSMP301 Memento Dye Ink Pad - Rhubarb Stalk for flowers, and TSMP701 Memento Dye Ink Pad - Cottage Ivy for leaves, colour them with Prima Water Soluble Oil Pastel Crayons using 409311 Color In Watercolor Brush and HCDA1-449 daubers. DIe cut them with matching HCD1-7358 Large Festive Poinsettia Die and shape them with HCFB1-5007 Large 3D Festive Poinsettia Shaping Mold. Assemble the poinsettia flowers using a hot glue gun and decorate flower centres with stamens.

Using a sponge, add Designer Dries Clear Adhesive to the flower petals and leaves, sprinkle them with Rajni Chawla's Crystal Clear Glitter and apply 3D1844 3-D Crystal Lacquer, then adhere flower and leaves to the card front as shown.

Stamp smallest cluster fom HCPC-3959 Holly Berry Spray Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP701 Memento Dye Ink Pad - Cottage Ivy, then colour it with the same ink using HCDA1-449 daubers. Die cut them with matching HCD1-7360 Holly Berry Spray Die, and apply Prima ‘Firebird’ wax on selected areas, then adhere the final piece to the card front.

Stamp leaves from HCPC-3958 Small Festive Poinsettia Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP701 Memento Dye Ink Pad - Cottage Ivy, colour them with the same ink using HCDA1-449 daubers. DIe cut them with matching HCD1-7359 Small Festive Poinsettia Die and shaped them with HCFB1-5008 Small 3D Festive Poinsettia Shaping Mold, then adhere them to the card front as shown.

Stamp the elements from HCPC-3932 Floral Shoppe Accents Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP507 Memento Dye Ink Pad - Elderberry, then colour them using Memento Dye Ink Pads: Lady Bug, Rose Bud and Bamboo Leaves. DIe cut them with matching HCD1-7330 Floral Shoppe Accents Die, shape them using HCST1-401 Deluxe Flower Shaping Kit. Using a sponge add Designer Dries Clear Adhesive to the elements, sprinkle them with Rajni Chawla's Crystal Clear Glitter and apply 3D1844 3-D Crystal Lacquer, then adhere them to the card front as shown.

As a final step, fill in the composition with pine cones as desired.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scissors, Hot glue Gun, Bone folder, Prima Water Soluble Oil Pastel Crayons, Prima ‘Firebird’ wax, red glitter, ‘Ho Ho Ho’ WOW! embossing powder, Versamark ink, Pine cones, anti static powder,

Instructions:

Prepare the Rounded Bi-Fold card by scoring on the folds already there. Cut 3 circles out of the Festive Poinsettia Paper collection, (sheet 5A for the front and inside and 10A for the bottom) using the Largest die from the Rounded Sunlight Window Frame. Adhere in place on all 3 panels.

Stamp 4 of the Holly Berry Spray (middle size) on white card stock with the Library Green, color with the Emerald Green, cut out with the coordinating die, glitter the fronts with the dries clear glue and Crystal Ultrafine glitter.  Adhere 2 to the front and 2 the the bottom as shown.

Stamp 5 of the smallest poinsettias from the Large Poinsettia Cling Stamp Set on white with the Jet Black ink, color with the Carnation Red, color the center with the yellow Zig marker, cut out with the coordinating die, ink the edges with Red Geranim, place in the matching mold and run through the die cut machine to shape. Adhere 2 flowers together making one flower. Add the center, adhere 3 to the front and 2 to the bottom. Stamp the smallest poinsettia from the Small Poinsettia Cling Stamp set on white with the black ink, color with the Carnation Red ink, cut out with the matching die, ink the edges with the Red Geranium ink, place in the coordinating mold and run through the machine to shape.  Put the 2 together making one flower, add the yellow center, adhere to the center of the bottom panel between the first 2 poinsettias.

Stamp 5 of the large leaves from the Large Poinsettia cling Stamp set on white with the Library Green, color with the Emerald Green, cut out with the coordnating die, place in the Large Poinsettia mold and run through the achine to shape.  Adhere 3 to the bottom and 2 to the front.

Stamp 2 of the smallest twigs from the Holly Berry Spray Cink Stamp set on white with the Versa Mark, hightlight with Silver Pearl Ex Powder, cut out with the coordingating die, adhere to the front.

To finish, add the sentiment to the top of the bottom panel using the Merry Christams stamp ffrom the Candlelit Poinsettia Cling Stamp set, add the Clementine Ultrafine glitter to the leaves and flowers.

Other Products: Die cut machine, Paper trimmer, Versa Mark, Pearl Ex Powder,

Instructions:

Card size is 6 x 6”. Score and fold 12 x 6" Deluxe Flower Shaping Paper at 6” to create a 6 x 6” tent fold card. Cut Luxe Gold cardstock 5 7/8 x 5 7/8”. Cut red paper from the Festive Poinsettia Paper Collection 6 3/4 x 6 3/4”. Adhere the two together and adhere to the card base with dries clear adhesive. Cut Deluxe Flower Shaping paper 5 3/8 x 5 3/8”. Cut Luxe Gold cardstock to 5 1/4 x 5 1/4”. Cut green designer paper to 5 1/8 x 5 1/8”. Adhere the three together and adhere to the card base. Cut Luxe Gold cardstock to 5 7/8 x 5 7/8” and red designer paper to 5 3/4 x 5 3/4”. Adhere the two together and adhere to the inside of the card.

Using the two largest Circle Basics Large dies, cut a circle from Luxe Gold cardstock. Adhere the circle to the card base using foam strips.

Stamp the Large and Small Festive Poinsettias on red metallic cardstock using VersaMark, stamp leaves with VersaMark on green metallic cardstock, sprinkle with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Place the flowers and leaves in the molds, spritz with water and run through the die-cutting machine. When dry, pierce the flower centers using the Groove golf Tool and insert the gold stamens. Use two flowers to create each poinsettia making sure to offset them.

Stamp the Small Festive Poinsettia leaves and the Holly Berry Spray leaves on Luxe Gold cardstock using VersaMark. Sprinkle with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Shape the Small Poinsettia leaves in the mold and shape the Holly Berry Spray leaves using the Deluxe Flower Shaping kit.

Create a cluster on the left side of the circle using the poinsettias and gold leaves, glue down using a hot glue gun. Add a few white pastel pollen stamens to the cluster.

Stamp the ‘Merry Christmas’ sentiment on white cardstock using Versamark, sprinkle with WOW Metallic Gold Sparkle Embossing Glitter and heat set using the Heat It Tool. Diecut using the arrows and banners die and mat onto Luxe Gold cardstock. Shape with fingers and adhere over the center of the circle.

Other Products: Diecutting Machine, Red Metallic Cardstock, Green Metallic Cardstock, VersaMark, WOW Metallic Gold Sparkle Embossing Glitter, Hot Glue Gun

Instructions:

The light yellow patterned paper is the 12 x 12" background. Cut white cardstock to 11 x 11" and distress the edges. Adhere these layers together. Die cut 4 of the Regal Pocket Accents Die corner from white cardstock and adhere to the corners of the layout. Trace a large circle in the middle of the layout with a pencil, this is the shape for your wreath. Add gems and pearls all around the circle. Mat the 3 x 4" photos in white cardstock, and adhere to the middle of the wreath using foam tape.

Stamp and die cut 4 sets of the small, and 2 sets of the other sized poinsettias using dark red ink (Stampin Up- Cranberry Crisp) onto Deluxe Flower Shaping Paper. Add color to the middle of the flowers using red ink (Ruby Red) and daubers. Shape the flowers using the coordinating 3D Shaping Molds. Assemble the flowers and add clear beads to the middle of each using liquid adhesive. Let dry.

Add more of the flowers to the bottom left hand corner of the layout, and the remaining flowers to the top right of the layout all using adhesive dots.

Other Products: Stampin Up Ink (Cranberry Crisp, Ruby Red), White Cardstock, Gems, Pearls, Paper Distresser, Clear Beads, Scrapbook Adhesives by 3L (Crafty Foam Tape, Adhesive Dots Medium, Adhesive Dots Micro, E-Z Runner Ultra, Dual Tip Glue Pen)

Instructions:

The finished card measures 6 inches by 6 inches. Cut 1 piece of red paper 5 3/4 x 5 3/4 inches. Cut a piece of white cardstock 4 3/4  X 4 3/4  inches and a checkered  paper 4 5/8 x 4 5/8 inches. Lightly trim the edge of these paper (except the white) with a tool designed for this purpose or simply the blade of a scissor. With a sewing machine go around the paper twice. For the base, cut a piece of paper in a white cardstock 12 by 6 inches and score at 6 inches on the width side. Fold to make a top folding card. Glue your papers over it. You can use 3D foam to give dimension.

Stamp your Poinsettia flowers with Vermillion ink onto white flower shaping paper, color the center and shade the edge with the same color. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers glue the die cut stamen and color it with the ice Stickles gold. Also stamp in library green and cut leaves. Add golden to your flowers and leaves with Nuvo Mousse Cosmic Brown.

Put cheesecloth and sewing thread in the center of your card.  Glue your flowers and leaves over it.

Stamp and emboss in gold a sentiment on a white cardstock of 1 x 1 3/4 inches. Adhere it on your card with 3D foam. 

To add a final touch, add stamens through your bouquet.

Other Products: Die cutting machine Cut’n’boss, heatgun, water mister, hot glue gun, hot glue, scissors, Ice stickles Gold, cheesecloth, sewing thread, Brilliance Ink Galaxy gold, versamark stamp pad,

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card.  Cut a piece of pattern paper with the cottage on 4 7/8” x 6 7/8” and adhere to the front of the card.  Stamp the cottage image from the HCPC-3938 Countryside Cottage Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Add Crystal Ultrafine glitter using Dries White glue to the roof and then adhere to the front of the card.

Stamp the bush and snow images from the HCPC-3938 Countryside Cottage Winter-scapes Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Adhere to the front of the cottage and add snow effects with Dries White glue.

Die cut the gold frame using the No. 2 from the HCD2-7306 Decorative Circle Frame Die set and the No. 1 die from the HCD1-7155 Circle Basics – Large Die out of gold cardstock.  Adhere over the cottage with foam strips.

Stamp the poinsettia images from the HCPC-3957 Large Festive Poinsettia Cling Stamp Set and the HCPC-3958 Small Festive Poinsettia Cling Stamp Set in embossing ink on Deluxe Flower Shaping Paper and heat emboss with gold embossing powder. Colour the petals with Lady Bug ink and the centres with Sunflower ink and die cut with the coordinating dies. Colour the backs with Lady Bug ink and shape using the coordinating molds. Assemble with two of each size petals. Add the separate centres to the flowers and then pierce the centres.  Insert some small gold pearl stamens through the centres and then add some Heart of Gold Prills to the stamens. Add Crystal Clear glitter to the flowers with clear gloss gel medium, trim the threads and adhere to the bottom right as shown.

Stamp the small spray images from the HCPC-3958 Small Festive Poinsettia Cling Stamp set in embossing ink on Deluxe Flower Shaping Paper and heat emboss with gold embossing powder. Colour the leaves with Leaf Green and Library Green inks and die cut with the coordinating die. Colour the back of the leaves with Leaf Green ink and shape using the coordinating mold.  Add Crystal Clear glitter to the leaves with clear gloss gel medium and adhere around the poinsettias as shown.

Stamp the leaf images from the HCPC-3959 Holly Berry Spray Cling Stamp Set in Mowed Lawn and Library Green inks and die cut with the coordinating die.  Adhere around the poinsettias as shown.

Stamp the mailbox image from the HCPC-3940 Countryside Cottage Summer’scapes Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Cut a hole in the mail box and adhere to the left of the frame as shown.  Stamp the sentiment image from the HCPC-3884 Candy Cane Cottage Cling Stamp Set in Obsidian ink on light green pattern paper and die cut out using the small decorative tag die from the HCD1-7203 Ornamental Tags Die set.  Slot the tag into the mailbox as shown and add a small twine bow.

Stamp the Christmas presents and birds images from the HCPC-3938 Countryside Cottage Winter-scapes Cling Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Adhere the presents around the base of the mailbox and the birds on the top left of the frame as shown with foam squares.

Other Products: Iris cardstock, clear gloss gel, Hero Arts Embossing and Watermark ink, foam squares,

Instructions:

Cut a piece of 5 3/4" x 5 3/4" pattern paper from Festive Poinsettia Paper Collection and adhere it on a 6" x 6" white cardbase. Die cut a piece of Luxe Gold Cardstock using Ornate Ovals Die and Window Hinges Die. Adhere the oval die cut on the card front using double sided foam tape and cut the hinge die in the middle and adhere them on the top and bottom right side corners as shown. Die cut a piece of white cardstock using the die from Eyelet Oval and Basics Large Dies and emboss it using Tim Holtz Brick embossing folder. Adhere it on the oval die cut using foam adhesive.

Stamp the flowers from Large Festive Poinsettia Cling Stamp Set and Small Festive Poinsettia Cling Stamp Set with Carnation Red Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching dies from Large Festive Poinsettia Die and Small Festive Poinsettia Die.

Stamp the leaves and flourishes from Large Festive Poinsettia Cling Stamp Set, Small Festive Poinsettia Cling Stamp Set and Holly Berry Spray Cling Stamp Set with Leaf Green Archival Ink on a sheet of Deluxe Flower Shaping Paper. Ink them with the same ink using oval makeup brush. Die cut them using the matching Large Festive Poinsettia Die, Small Festive Poinsettia Die and Holly Berry Spray Die.

Shape them all using Large 3D Festive Poinsettia Shaping Mold, Small 3D Festive Poinsettia Shaping Mold and Deluxe Flower Shaping Kit. Apply Designer Dries Clear Adhesive on them using Hydra Sponges and sprinkle Craftangle Shimmer Dust glitter. Add a little Lettuce Entertain You Prills to the poinsettia centers. Arrange and adhere the flowers and leaves as shown on the card front. Add a few rhinestones to the gold die cuts to add finishing touch.

Other Products: Oval makeup brush, Craftangle Shimmer Dust glitter, Ebosser, Tim Holtz Glass Media mat, Tim Holtz Brick embossing folder, MS scoreboard, hot glue gun, water spray bottle, rhinestones and double sided foam tape.

Instructions:

Prepare a fold-out base from white cardstock. Use the outer frame of the Elaborate Oval Frames Die HCD1-7309 set. Fold the sheet in half and crease it (you can use a creasing board if you have one). Crop to close to the size of the frame you are using. Cut the same frame but a single one from the yellow 10B sheet of the Festive Poinsettia Paper Collection HCDP1-2129. Glue to the base.Using the decorative die from the same set, cut out of luxe gold cardstock. Glue to the previous ones. Cut the even smaller frame from the set from the Festive Poinsettia Paper collection sheet 10B and join it with the others.

Prepare paper flowers. Stamp the images of large and small poinsettia using Black Cherry color. Stamp 4 small flower petals from the Large Festive Poinsettia Cling Stamp Set HCPC-3957 and 3 larger petals from the Small Festive Poinsettia Cling Stamp Set HCPC-3958, 2 of which will be red (Black Cherry) and 1 green (Bamboo Leaves). Cut with matching dies. Apply colors with a dauber. Shape in 3D mold from collection. For each individual petal, gently fold the ends down. Add 2 petals together with a slight shift, place on a flower shaping mat and make a recess in the center with the largest ball tool from the Deluxe Flower Shaping kit. Glue together. For small poinsetti, combine 2 petals into 1 flower. For a larger flower, add
green underneath. Add stamped flower stamens. Apply yellow ink (Sunflowers) beforehand. For large poinsetti, place 2 stamens. Use the thin end of a flower forming tool to press them down.

Also stamp 2 leaves from the Small Festive Poinsettia set and 2 smaller flourishes from the Holly Berry Spray Cling Stamp Set HCPC-3959 using the Bamboo Leaves color. Cut with matching dies.

Place the artwork in the center as shown. Use 2 smaller flourishes underneath and place flowers on top of them. Brush the flowers with glue, you can do it gently with a finger or a brush. Sprinkle with Crystal Clear powder.

Prepare a sentiment from the Festive Winterscapes set, stamp it on white paper using the Black Cherry color. Cut the outline with scissors. Place on the 3d foam strips at the bottom of the composition. Add a string and a golden pearl.

Other Products: Cutting machine, paper trimmer, twine, scissors, pearl

Instructions:

Start with 5 x 7" Gateway Fold Card base. Using outside Scalloped Flourish Gateway Die, cut from designer collection paper and place onto the card using Designer Dries Clear Adhesive. Cut scalloped frame from Luxe Gold cardstock. Cut out the decorative frame from luxe gold and paper collection paper. Glue it together gold frame under paper collection frame, make sure to offset a bit and adhere to the front of the shaped card using  Adhesive Foam Strips for dimension. Cut designer collection paper and a sentiment for the inside of card and adhere. 

To create Poinsettia flowers, Stamp the Large Festive Poinsettia Cling Stamp Set on foam paper with StazOn Ink Pad - Black Cherry and cut using the coordinating dies. Colour with Gallery soft oil pastels 209. You will need 3 petals for each to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink, move them on the Molding Mat and press on the middle using large shaping tool. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Frosting Powder.

To Create the leaves, stamp Large Festive Poinsettia Cling Stamp Set with Ranger Archival Ink Pad - Library Green and color using Ranger Archival Ink Pad - Olive and cut using the coordinating dies. Place the leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To Create the berry leaves, stamp Holly Berry Spray Cling Stamp Set with Ranger Archival Ink Pad - Library Green and color using Ranger Archival Ink Pad - Olive, cut using the coordinating dies and shape. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Candlelit Poinsettia Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery soft pastel 209

Instructions:

Tag size is 4 x 6". Using the Album Tag die, cut one tag using white cardstock. Cover with a piece of the paper collection; I used a piece of sheet 3B for this. Before gluing this down wrap a piece of white seam binding around the paper. Tie a bow out of the same seam binding and adhere to the the tag. I used Scor-Tape and Designer Dries Clear Glue for this.

Using the Small Festive Poinsettia cling stamps, stamp the petals using Sap Green ink onto Deluxe Flower Shaping Paper. Color using Stack & Store Daubers, Leaf Green Ink and Pink Peony and Spun Sugar inks. Cut out with coordinating dies and lay onto the mold, spritz with water then run through the die cut machine. Turn out onto the desk to dry. Once dry, I glued two petals together and then the stamen. I used hot glue for this then I added a puddle of hot glue to the center of the stamen and dumped Heart of Gold Prills onto the hot glue. Now add the glitter using one of the Hydra Sponges and Dries Clear Adhesive.

Using the Large Festive Poinsettia for the Holy and the Holly Berry Spray, stamp with Leaf Green ink onto Deluxe Flower Shaping Paper. Color with Leaf Green ink and cut out with coordinating dies. Edge the leaves and spray with Olive ink to give them more dimension. Lay the Holy leaves onto mold, spritz with water and run through the die cut machine. I used the Deluxe Flower Shaping kit to add a bit of dimension to the Holly Berry Spray.

Stamp the sentiment from the Festive Winterscapes collection onto white cardstock using Pink Peony ink and cut out using the Ornamental Tags die. Edge with Pink Peony ink. Cut one of the decorative tags using Luxe Gold Card Stock and glue the sentiment to that. I used dimensional tape to adhere to the top of the tag.

Decide on placement and using the hot glue gun glue everything down. Punch a hole in the top of the tag and thread a piece of left over seam binding through the hole and the tag is finished. This makes a great tag to send along with a gift or it can be a stand alone gift.

Other Products: White Cardstock, Die Cut Machine, Hot Glue Gun, White Seam Binding, Dimensional Tape, Scor-Tape, Sap Green Archival Ink, Spun Sugar Distress Ink

Instructions:

Create a 5 x 7 inch card base. Cut a 5 x 7 inch piece of dark green paper from the Festive Poinsettia Paper Collection and adhere to card front. Cut the 4.5 x 6.5 inch music piece of designer paper from the Festive Poinsettia Paper Collection, distress with Cactus Green and adhere.

Stamp the holly flourishes from the Holly Berry Spray Cling Stamp Set with Olive Green and the branches in pigment ink, emboss the branches in Gold, cut out with coordinating dies and sculpt with stylus.

Stamp the Large and Small Festive Poinsettia Cling Stamp Sets in Desert Sand and Fuchsia Pink, sponge centers of the pink flowers with Fuchsia Pink and the Desert Sand flowers with Cactus Green, sponge stamens with Cactus Green, cut out with coordinating dies and sculpt with the Large and Small 3D Festive Poinsettia Shaping Mold and add glitter.

Stamp the leaves from the Small Festive Poinsettia Cling Stamp Set in Olive, sponge with same, cut out with coordinating dies and sculpt with the Small 3D Small Festive Poinsettia Shaping Mold.

Cut out the sentiment from the paper collection and adhere with foam tape, cut out the eyelet rectangle with the Eyelet Rectangle & Basics Die in white cardstock, adhere together and adhere to top right side as shown.

Adhere flowers and leaves as pictured.

Other Products: Pigment ink, Stazon Cactus Green ink pad, heat gun

Instructions:

It’s a ready folding card measuring 9 by 5 7/8 inches. Cut a panel from golden card measuring 8 3/4 by 5 1/2 inches and adhere on to the card base using foam strips. Cut a panel from Deluxe Flower Shaping Paper which is slightly smaller than golden card and adhere on to the golden panel using clear glue, cut panel slightly smaller than white panel from Festive Poinsettia Paper Collection and adhere on to the white panel using clear glue.

Cut Largest three sizes of frames from Deluxe Flower Shaping using Eyelet Frame Gateway Die and set aside, Cut inside panel from designer paper using largest three sizes of inside window frames from Eyelet Frame Gateway Die. Take inside die from Teardrop Lattice Gateway Die and die cut last smallest panel of frame. Adhere all three inside panels on the white Eyelet Frames using clear glue. Add all three frame on to the card front using foam dots as shown.

Cut sentiment from luxe gold card using Ornamental Tag Die, cut shadow dieut of same tag  from the paper collection adhere golden sentiment on to the shadow diecut using clear glue. Add this sentiment in the center using foam dots.

For the poinsettia, stamp both smallest flower sizes, Holly Berry Spray stamps and leaves on to the deluxe flower shaping paper using versamark ink cover with white embossing powder heat it using heating tool. Die cut all images using coordinating dies. Color the flowers centers with Coastal Coral ink, leaves with vivid ink, shape the flowers using shaping Molds and finish shaping using shaping kit, make a few flowers, add three layers of same size for making each flower. Add clear glue in the centers sprinkle mini prills.

Arrange all ready elements and flowers as shown using hot glue gun.

Embellish the card with nuvo drops and rhinestones.

Other Products: Rhinestone, Die Cutting Machine, Nuvo Drops, tape, Hot Glue Gun.

Instructions:

Cut a 5.75” x 8.25” base out of white paper. Then, from the paper collection, cut a rectangle 5.50” x 8" glue it to the base. Then, cut 4.50" x 7" rectangle from white paper and glue to the base as pictured. Cut a 4.25" x 6.75" rectangle from the paper collection and glue to the base. From white paper, cut a frame from the Royale Gateway Die set.

From the collection of paper, cut a frame with a ready-made sentiment.

To create flowers, stamp the Large Festive Poinsettia on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Pad – Rose Madder then shadow with the same ink and die cut using the coordinating die. Form with 3D Large Poinsettia mold. Cover the center of the flowers with yellow. Glue inside the flowers.

To create leaves, stamp the leaves from Holly Berry Spray Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Emerald Green and Archival Ink Pad - Leaf Green, die cut with the coordinating die, shade using this same ink.

Arrange all the elements as shown, add sisal cover with glue and sprinkle with glitter.

Other Products: sisal

Instructions:

This gift box measures 8" x 4" x 1/2"  when closed. Taking the sheet 9 B from the paper collection, cut the box base  8" x 11 1/2"  along the 11 1/2" edge make folds at 4“, 4 1/2", 8 1/2" and 9". From the same paper, cut twice a small piece at 1" x 2 1/2", this will be your gusset for the box. Make two folds at the 1 1/2" edge at 1/2" each.

Make all the folds then sharpen all the folds with the bone folder. Adhere the gusset in place with both double sided tape and adhesive as this will allow the gusset to slide into place and secure. Adhere a gusset tab to the 2 1/2" edge of the box. Trim to the size of the box side if needed. Once this is secure, adhere the other side of the gusset to the 4" edge so the gusset will form the box shape. Repeat for the other side. This has formed the chocolate box base.

To cover the box, outside and inside, cut the matting a little smaller than all the box base sizes. Ink the edges of the papers with the fern green then adhere in place on the box with double side tape or clear drying adhesive.

Die cut the inside tags using the Ticket and tags die set. Ink the edges of the tag with the fern green ink. Adhere this completed tag in place to the inside of the box lid.

Adhere with the hot glue gun a length of wired ribbon to both edges of the box front to form the tie around the box, allow enough ribbon for the bow. 

Make the poinsettias, leaves and swirls by stamping with the versa-mark onto white card stock then apply embossing powder. Secure the embossing powder with the heat it tool. Die cut with the matching die sets then color using the Spectrum Noir water coloring pencils:- Claret, Pineapple, Bright Green, Brown Blue, Olive. Bring shape to the elements by using the matching molds and or the flower shaping tools. The poinsettias have two layers of petals. Make two larger sizes and five small sized flowers. Four holly leaves, two large swirls, four smaller swirls, four leaf clusters, three very small holly berry sprays.

Arrange all the elements as shown. Secure all in place with the hot glue gun. Adhere the half gems to the flower centers. Arrange and adhere the swirls and flowers to the box inside and tag top . Place the chocolate bar/packet in the box pocket. Tie the ribbon bow  to close the box.

Other Products: Inks: Spectrum Noir water coloring pencils:- Claret, Pineapple, Bright Green, Brown Blue, Olive. Ranger Archival ink Venetian Orange. Other: Water mister, 3D double sided foam dots, double sided tape, Versa-mark, Half pearl gems, Wired green ribbon, hot glue gun, Half pearl gems, Merci chocolate bar or chocolate bar that fits into this box.

Instructions:

Cover a 6 x 6" tent fold card blank with Wild Rose Paper Collection. Die-cut Frame A Card Leafy Borders in pink from the paper collection with the outline die and together with the leafy border in green. Edge all in Pink Peony. Adhere the 6 x 6” frame together securing from the back over the mitred corners to hold together.

In the same pink paper die-cut the Lacy Diamond together with the Small Decorative Diamond use tape to secure the two are pushed together. Reposition the Small Decorative Diamond to cover the entire area within the Lacy Diamond centre. Cut the Lacy Diamond in half and adhere the centres together. Add gems to the pattern and a large gem in the centre to cover the overlap. Adhere to the back of the frame. Mount the frame on dots and add a dot behind the large gem. Secure the frame to the card front.

Stamp onto Deluxe Flower Shaping Paper Leafy Accents in Leaf Green, colour in Vivid Chartreusse and die-cut with coordinating die. Edge in Fern Green and place in the 3D Leafy Accents Mold, spritz with water and run through the die-cutting machine. Cover in lacquer and add glitter.

Stamp onto Deluxe Flower Shaping Paper Clematis in Vibrant Fuchsia, colour in Pink Peony and die-cut with coordinating die, edge in Magenta Hue and place in the 3D Clematis Mold, spritz and run through the die-cutting machine. Further shape with Deluxe Flower Shaping Tools and add Go Man Go prills to the centres, you can use dries clear or hot glue for this.

Stamp onto Deluxe Flower Shaping Paper in Sky Blue Small Sweet Peony. Colour with French Ultramarine and die-cut with co-ordinating die set. Edge in Manganese Blue, place in 3D Floral Basics Shaping Mold, spritz with water and run through the die-cutting machine. Further shape with Deluxe Flower Shaping Tools. Poke a hole through the centre and secure a stamen at the back with hot glue, cut off remaining cord (the stamen is from Bridal Stamens and coloured with Archival Buttercup).

Secure the flowers and leaves to the card with hot glue.

Other Products: Paper trimmer, scissors, hot glue, gems

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7” and score at 5” along the long side and fold.  Die cut the shaped base using the No. 1 die from the HCD2-7350 Royale Gateway Die with the top over the fold of the die. Diecut two backgrounds out of green pattern paper using the No. 1 die from the HCD2-7350 Royale Gateway Die set. Sponge the edges with Leaf Green in and adhere one background to the front of the card and the other one to the inside of the card trimming the top to fit.

Stamp the trellis image from the HCPC-3956 Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut out with the coordinating die. Adhere to the centre of the front of the card.

Die cut two gates out of white cardstock using the HCD2-7350 Royale Gateway Die set.  Adhere together and add Frosting Powder using spray adhesive and trim the gates and the top off.  Adhere the gates to either side of the trellis with the gate opening out.

Stamp the large clematis floral spray from the HCPC-3955 Clematis Spray Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere the trimmed top of the gate to the back of the spray and then adhere the spray to the top of the trellis with foam squares.

Stamp the straight clematis floral spray from the HCPC-3955 Clematis Spray Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Trim and adhere to the right of the gate as shown.

Stamp the birdhouse image from the HCPC-3956 Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the left side of the gate with foam squares.

Stamp the bird images from the HCPC-3956 Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere the birds on the card as shown with foam squares.

Add Heart of Gold Prills to the centres of all the flowers.

Inside: Die cut two Thank You sentiments out of white cardstock using the HCD2-7351 Ironwork Sentiments Die set.  Adhere together and then add to the inside of the card.

Other Products: Iris cardstock, foam squares, spray adhesive

Instructions:

Cut an 11” x 7” piece of white cardstock, fold in half to create a 5 1/2” x 7” card base. Die cut shaped card using largest die from the Large Floral Butterfly die set. Fold front of shaped card in half to create easel card. Die cut another large butterfly and glue to lower half of shaped card front.

Stamp Large Floral Butterfly on gold cardstock using StazOn ink pad in Fuchsia Pink and then die cut with coordinating die. Glue stamped butterfly to front of card. Die cut decorative butterfly using white metallic cardstock, glue to card front. Die cut a second gold butterfly for the inside of card.

Stamp multiple flowers and leaves with Sweet Magnolia Blooms cling stamps using archival ink in Plum onto flower shaping paper. Die cut flowers and leaves with coordinating dies. Color flowers with archival inks using Daubers. Shape flowers and leaves using Magnolia Shaping Mold. Embellish center of flowers with gold stamens.

Stamp more leaves with Leafy Accents cling stamp using archival ink in Leaf Green onto flower shaping paper. Die cut with coordinating die, color with archival ink and shape with Leafy Accents shaping mold. Glue flowers and leaves to front left butterfly corner and inside of card as shown.

Other Products: Die cutting machine, hot glue gun, hot glue, paper trimmer, white cardstock, white metallic cardstock.

Instructions:

Cut a Spring Garden Paper collection mat to fit a 6 x 6" card base tent fold edged in Deep Purple.  Die-cut 4 Swirly Accent Sprays in white cardstock and adhere onto the mat on each side. Cut white cardstock 5 x 5" and mat the same pattern paper edged in Deep Purple.  Die-cut 4 white Swirly Accent Corners and adhere to the mat in each corner. Mount this mat at an angle onto the card base with dots. Die-cut in white cardstock the scallop and smaller rectange from Eyelet Rectangle & Basics die to create a frame. Cut the same patterned paper again to sit behind the frame, before you adhere this, die-cut 2 Accent Sprays in white cardstock and adhere on the longer sides, arrange the die-cut tops to meet, cut off the excess and adhere the panel behind the frame.  Mount this frame onto the card base at an angle on dots. Mat and layer an arrow from Arrows and Banner Die, again use the same matching patterend paper, edge in Deep Purple, mount onto the card with dots and leave some spaces to poke the leaves into.

Stamp onto white cardstock 1 large and 2 smaller hyacinths from Fragrant Hyacinth with Deep Purple and Fern Green ink pads, stamp directly onto the stamp seperating the leaves and flowers and die-cut with coordinating die, edge in the same colours and colour the leaves with Vivid Chartreusse and Leaf Green. Stamp in Deep Purple onto Deluxe Flower Shaping Paper Fragrant Hyacinth, colour with a combination of Sky Blue and Majestic Violet. Die-cut with coordinating dies, edge in Deep Purple and lay in the 3D Hyacinth Shaping Mold, spritz with water before running through the die-cutting machine. Further shape the petals using Deluxe Flower Shaping Tools for the large hyacinth by curling the petals under and cupping the centres and the smaller are pinched between fingers prior to adhering. In position, add nuvo drops to the petal centres (drops could be added prior to adhering if preferred).

Stamp in Fern green onto Deluxe Flower Shaping Paper Floral Shoppe and Floral Butterfly leaves. Colour with Vivid Chartreusse and Leaf Green and die-cut with coordinating dies. Edge in Fern Green and shape with ball tools. Add lacquer and glitter and allow to dry.

Use hot glue to adhere the leaves and hyacinths to the card, finish by tucking a tag stamped in Deep Purple 'you are so thoughtful' from Just For You Sentiment Cling Stamp Set.

Other Products: Paper trimmer, scissors, hot glue