Other Products: Die-cutting machine, Score Board, Smooth White Cardstock, Glue dots, Foam Tape, Distress Oxides: Peeled Paint, Hero Arts White Pigment Ink and White Heat Embossing Powder.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Create a top fold card from a smooth white cardstock, measuring 6" by 8". Choose the paper from the designer paper collection and cut it 1/16th smaller than the card front. Mat a white cardstock, little larger than the pattern paper to make a delicate white border all around. Layer the panel on the card front.

Cut all the required die cuts from pattern paper, Gold Luxe and white cardstock using Majestic Swirl Frames Die and assemble them as shown. Stamp the sentiment in the center using Plum Archival Ink.

Stamp the required floral on Deluxe Flower Shaping Paper using Magenta Hue and cut them using their coordinating dies. Color them using Magenta Hue and Cactus Flower Archival Inks. Shape the flowers using Golf Groove Tools and add prills to their centers. Add some glitter to the flowers using Frosting Powder.

Stamp Lush Lilacs and Leafy foliage from Leafy Accents Stamp sets on Vellum cardstock using Hero Arts white pigment ink, sprinkle white heat embossing powder and dust extra. Next, heat set the images and cut them using their coordinating dies. Color the leaves using Peeled Paint and Lush Lilacs using Rusty Hinge distress oxides. Shape the foliage and Lilacs using needle tool. Add Prills to Lilac Centers.

Once all the elements are ready, assemble the card as shown.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, Distress Ink Peeled paint, Promarkers, lace

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the Flowering Dogwood collection, watch the tutorial at https://youtu.be/gI8RqHAt3vE.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 12 x 6", score at 6” and fold, then cut out a 5 1/2" circle. Cut out another 5 1/2” circle of the white cardstock and 5"circle of the Tender Moments paper, attach them to the base. Again, cut out 4 1/2" circle of the white cardstock and 4"circle of the Tender Moments paper. Use dimensional adhesive to attach them in the center of the card.

Stamp the basket of the balloon from Baby`s Air Balloon Cling Stamp Set onto Deluxe Flower Shaping paper in Jet Black ink and cut out it with coordinating die. Stamp inscription from Welcome Baby Cling Stamp Set in Jet Black ink onto same cardstock and diecut with coordinating die. Stamp blossoms from Oakberry Lane Blossoms Cling Stamp Set and Flowering Dogwood Cling Stamp Set in Lilac Posies ink onto Deluxe Flower Shaping paper and diecut with coordinating die. To make this card you`ll need 3 large blossoms, 4 medium blossoms and 6 small blossoms. You`ll also need 5 branches from Leafy Accents Cling Stamp Set and 3 leaves from Oakberry Lane Blossoms. Stamp them in Leaf Green ink and cut out with coordinating dies.

Use the Stack and Store daubers to color all flowers and leaves. For big flowers use Rose Bud ink, for leaves use Distress Ink Peeled paint and Leaf Green ink. For basket and inscription use markers or watercolor pencils. Shape the flowers and leaves using their coordinating shaping molds. Use the Deluxe Flower Shaping stylus to add more dimension to blossom. At the center of bigger flowers attach paper flowers colored with Leaf Green and Lilac Posies ink. Use dimensional adhesive to attach basket and inscription, use hot glue to attach blossoms, leaves and lace onto card as pictured.

To add that extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and stamped inscription.

Decorate card with few small self-adhesive crystals.

Other Products: Watercolor paint, glue, 3d squares, white card 120g, pink marker

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Create a double white card base 3 3/4 x 6’’. Cut out a slightly smaller rectangle from white card. Cut the third largest Majestic Swirl Frames Die out of pink paper from Tender Moments Paper Collection page 4B. Glue all layers on the base as shown. Stamp flowers, inscriptions and the elephant image in black ink. Paint using watercolor paint. Shade the inscription with a pink marker. Create a layered composition as shown. Using 3d squares.

Create a layered composition as shown using 3d squares.

Other Products: Dimensional Tape, Sheer Shimmer Spritz – Sparkle, Small Dimensional Dots, White Cardstock, Zig Marker Light Blue

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to view the inside of this card. Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create top fold card base. Diecut the edge using decorative Fleur Border Basics Die. Cut pink paper with the hearts (Sheet 9B) from the Tender Moments Paper Collection 4 7/8 x 6 7/8” for the inside of the card and 4 x 6 7/8” for the front of the card. Use the plain edge Fleur Border Basics Die to cut the front. Edge both pieces using Magenta Hue ink.

Using the largest eyelet heart and the largest plain heart from the Eyelet Hearts Die set, diecut a frame from white cardstock. Sponge heart frame and decorative card edge with dries clear adhesive and sprinkle with Rajni Chawla’s crystal Clear glitter.

Stamp images from Baby's Friends Cling Stamp Set, Baby Girl and rose spray images from Welcome Baby Cling Stamp Set on watercolor paper using Memento London Fog ink. Color using Zig markers; pale green, light gray, pale pink and light blue and diecut using coordinating dies. Diecut one more time each and adhere the layers together. Spray with Sheer Shimmer Spritz – Sparkle.

Adhere the pink designer paper to the inside of the card using dries clear adhesive. Adhere the designer paper to the front of the card using dimensional tape. Adhere Baby’s Friends to the inside of the glittered heart frame using hot glue. Adhere rose sprays to the frame and to the top left of the card using dimensional dots and hot glue. Adhere small rose to top of ‘Baby’. Adhere ‘Baby Girl’ images to the bottom left of the card using small dimensional dots. Stamp ‘Congratulations’ on diecut heart using Magenta Hue ink and adhere to inside of card.

Stamp ‘Congratulations’ on diecut heart using Magenta Hue ink and adhere to inside of card.

Other Products: Foam tape, distress oxide victorian velvet, white cardstock.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a 6 by 6” card panel from the Tender Moments paper collection. Cut the inside window. Create a card base and cut the top front for the window. Cut the decorative pocket die from the petite pocket accents die set and adhere it on the top part of the window from the back. Cut the small air balloon from the pattern papers and adhere it inside the card with foam tape. Cut a sentiment from the paper collection and glue it on the window frame from the inside.

Stamp the images from the welcome baby with archival black ink. Color the stamped images with alcohol markers and cut them using the coordinating dies.

Stamp the flowers from the classic rose cling stamp set on vellum with versamark and heat emboss in white. Color the flowers with distress oxide Victorian velvet. Also stamp on white cardstock with Rose Bud ink and color with same ink. Stamp the leaves from the leafy accents cling stamp set with archival fern green and color using memento bamboo leaves and olive green. Cut the flowers and leaves using their coordinating dies and shape them using the coordinating 3d shaping mold.

Arrange everything as pictured. Lastly, dust the flowers with crystal clear glitter powder.

Other Products: Scoring board, die cutting machine, white card stock, yellow card stock, pink grosgrain ribbon

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Make a top folding card base 6 1/2 inches by 6 inches from white card stock. Add a mat layer a little smaller than card base from the pattern paper and adhere to card front. Cut 4 rectangle strips 5 1/2 inches by 1 1/4 inches with baby animal print and mat them on white card stock strips leaving a thin border around. Adhere them with foam tape on a pattern paper leaving little gap between them. Now cut around the pattern paper. Mat this panel on white card stock. Assemble the whole piece on card front.

Cut double die cut lace from sweetheart border die and add to the card front. Add ribbon and adhere with glue. Cut a rounded frame die cut in yellow card stock. Remove the centre part using the circle dies. Add a background from pattern paper at the back of the frame. Attach the frame on the card front.

Stamp the rose flowers from wild rose collection in pink peony ink on the deluxe flower shaping paper. Stamp the rose vines. Colour using the archival colours and zig markers. Make leaves from Large wild rose collection. Shape the flowers with groove golf tools and add stamens. Make small green flowers from small wild rose set.

Stamp the baby animals according to print on the card strips and colour with zig markers. Cut with matching die and adhere to the strips with foam tape.

Cut a small circle and stamp baby girl image and add to the card.

Other Products: Watercolor paper

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Prepare a shaped card out of the Flower Shaping paper using the Baby’s Air Balloon die, the stamp it on Watercolor paper in black ink. Use the Zig Markers and color, cut out using the coordinating die and adhere on top of the shaped card you made.

Stamp the Baby’s Friends with black ink on the watercolor paper, color with the Zig Markers, die cut with the coordinating die, place in the basket of the balloon. Stamp the sentiment in the banner of the balloon with black ink.

To finish, add glitter around the balloon and Friends.

Other Products: Ribbon, Ranger Distress Oxide – broken china,

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Card size is 6” x 6” on white cardstock. Cut a 5 3/4” x 5 3/4" square from the paper collection and glue it. Then cut a square 5 1/2 "x 5 1/2" from collection paper and glue. Cut one more square 5 3/4 "x 5 3/4" from the paper collection and glue.

From the white paper, cut the second frame with the Rounded Scallop Window Die. Cover with Glue and Brocade Chawla's Crystal Clear and glue on the base.

Stamp the Leafy Accents leaves on the Deluxe Flower Shaping paper with Distress Oxide Broken China, die cut with the coordinating die, shade using Ranger Archival Ink Pad - Fern Green ink. Shape leaves using 3D Leafy Accents Shaping Mold.

To create flowers, stamp the Small Wild Rose on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Pad - Rose Madder and die cut using the coordinating dies. Shape using and HCFB1-486 Small 3D Wild Rose Shaping Mold. Glue Go Man Go Prills in the flower centers.

Stamp images from the HCPC-3915 Welcome Baby and HCPC-3916 Baby's Friend , die cut using the coordinating dies. Color with watercolors.

Glue everything as pictured, add a ribbon.

Other Products: Black Soot, Worn Lipstick and Mowed Lawn Distress inks, Versafine Onyx Black Ink, Ranger Black Embossing Powder, oval makeup blending brush, paint brush, watercolor cardstock, transparent glitter and pearls.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Die cut a piece of white cardstock using the die from Majestic Swirl Frames Die. Apply a layer of Designer Dries Clear Adhesive on the die cut using Hydra Sponges and sprinkle clear glitter on top. Burnish the glitter with fingertips once the glue has dried completely. Cut a piece of white cardstock to mat on the die cut, ink it lightly with Worn Lipstick distress ink and adhere it on the die cut. Adhere the die cut on a 4 1/4" x 5 1/2" white card base as shown using Darice Adhesive Foam Strips.

Stamp the sentiment from Celebrate Love Sentiments Cling Stamp Set on a strip of white cardstock with Versafine Onyx Black Ink and heat emboss using Ranger Black Embossing Powder and Heat It Craft Tool. Trim the sentiment strip to fit the space below the die cut and adhere using Darice Adhesive Foam Strips.

Stamp the cute animals from Baby's Friends Cling Stamp Set on a piece of watercolor cardstock with Jet Black Archival Ink. Die cut them using matching dies from Baby's Friends Die and color them with Black Soot, Worn Lipstick and Mowed Lawn Distress inks. Die cut 1 more sent of white cardstock using the same dies. Stack the matching die cuts and adhere them together. Adhere them on the card front as shown using Darice Adhesive Foam Strips. Add tiny drops of Ebony Black Nuvo Crystal Drops to the eyes of all the animals. Add pearls to add finishing touch.

Other Products: Die cut machine, scissors, scoreboard, polystyrene balls, foam pads, wink of stella, glitter, distress oxides blueprint sketch, wilted violet, shaded lilac, vintage photo, broken china, corner punch, bone folder, water mister, glue gun

For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

Instructions: Click here to view more photos of this project. Click here to see a video of this project.  In white cardstock cut a card base 6 x 6” and front panels 5 1/2 x 4", 5 x 4". Cover the card base front 6 x 6” with patterned paper. Score 1/2” on the left panel and 1/2” on the right panel to form a hinge which will be secured to the back of the 6 x 6”. On the opposite end of each panel with a pencil, mark 1/4” and cut a tab, the left panel tab will slot into the 6 x 6” at 3” front on the left hand side and the right panel tab will slot into the left panel at 3” from the left hand side (2 1/2” from score line). Cover front and back panels with patterned paper leaving room to tuck in Large Fleur Borders on the back side of each panel. With the Fleur Plain Border cut the left panel 3” high left-hand side, 2 1/2” high tab side, 3 1/2” at the highest. Cut the right-hand panel 3” high right-hand side, 2 1/2” high tab side, 3 1/2” at the highest (tabs and panel sizes can be altered to fit your patterned paper design). Adhere the hinges to the rear of the 6 x 6” and cover with patterned paper and round the top corners with a punch. Mat and layer punched corners blue and patterned paper 5” wide, 5 1/2” high. Using Cut Mat Create Dies 2A and 2B mat and layer blue patterned paper and white cardstock. All edged with blueprint sketch.

Stamp out in Archival 3x fence, 2x Hydrangea Arch and 2x Feathered Friend, Large Fresh Cut Hydrangea, 3x Small Fresh Cut Hydrangea + additional leaves, Cottage Garden Hydrangea and a mix of petals to form the blooms and die-cut with coordinating dies. Colour the hydrangea petals in a mix of broken china and shaded lilac with Archival Vivid Chartreuse centres. Place petals face down in the Hydrangea Shaping Mold and spritz the back with water before running through the die-cut machine. Remove from the mould and shape with Deluxe Flower Shaping Kit prior to threading stamens. Cut a polystyrene ball in half and adhere centre of the hydrangea image. Use a glue gun to build up the petals to form the hydrangea 3D blooms. Colour the fences with vintage photo and all other elements with Zig Clean Color Real Brush Markers. Add wink of stella to hydrangeas. Add Designer Dries Clear and glitter to hydrangea petals and leaves.

Adhere a fence die-cut inside each curved panel and top with Hydrangea Arch. Curl the remaining fence die-cut and adhere to the 6 x 6” base to sit within the left-hand curved panel when closed. Adhere Small Fresh Cut Hydrangea, Cottage Garden Hydrangea and Feathered Friends inside the curled fence. Add additional leaves into the bloom. Adhere Large Fresh Cut Hydrangea and Feathered Friend to the back mat and layer panel.

Other Products: White cardstock, foam sheet, Electric Green Ink, London Fog, Embossing folder, black pen, white paint, Copic: YG11, YG41, B21, B41, B00, Y11, Y15, RV00, RV10, E43, E79, C2, C3, E50, E51, E21

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Card size: 4 3/4 x 5 1/2". Cut white cardstock 4 3/4 x 11", score and fold at 5 1/2 and 8 3/4. Cut the 5 1/2" side with the outer die of the Decorative Circle Frames. Cut another white piece of cardstock 4 3/4 x 5 1/2" and cut one end with the outer Decorative Circle Frames Die. Glue the 4 3/4 x 5 1/2" card front piece to the card base 2 3/4" end (make sure the decorative end is facing up on the card front). Cut decorative paper to match card base inside and card front. Cut 2 Decorative dies from the Decorative Circle Frames out of white and cut 2 eyelet circles from white. Emboss the 2 circles. Glue the white decorative dies and the circles to the card front and the inside. Cut a white heart and an eyelet white heart for the bottom of the card front and pop it up.

Stamp elephant, panda, and racoon using London Fog, die cut and color. Stamp Baby and Boy using Sky Blue then die cut and color. Die cut another set of Baby Boy from foam sheet. And glue to the bottoms of the Baby Boy images. Glue these to the card base inside (they will be the “stop” for the front to stand up). Stamp Welcome on white and die cut with the long die from Tickets and Tags then cut a white frame with the eyelet long die (these dies are long, so you have to shorten them). Pop the Welcome toward the top of the card front. Pop up the little animals under the Welcome sign and above the heart.

Stamp roses with Sky Blue and sponge the edges. Stamp the leaves using Electric Green and sponge with Chartreuse. Form the roses and leaves in the rose mold. Make most of the roses into buds using a white wired stamen in the centers. Punch green pointed flowers from green to use as sepals for the buds. Add roses, buds, leaves to the bottom of card front and both sides of the card base sides only even with the top of the word Baby. Set the card front in its stand-up position for correct placement of flowers. Glitter the card and flowers.

Other Products: White cardstock, die cutting machine, funnel tray, scissors, paper trimmer, dimensional adhesive, Wisteria glitter, hot glue, piercer, mister, distresser

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Cut white cardstock to 5 1/2 x 11”, score and fold at 5 1/2”. Cut 5 strips of paper from paper collection at 1 x 5 1/4”. Use paper distresser along edges as desired. Adhere using foam adhesive, to mount on a white cardstock mat, then adhere onto card base.

Diecut white cardstock to create some shapes. Die cut two circles from Decorative Circle Frames die and coordinating dies from the Eyelet Circles and Basics Small die set, to create a circle frame. Apply glue onto sponge, dab randomly over circle frames, sprinkle with Rajni Chawla’s Crystal Clear and adhere onto card base. Die cut ornate die from Royal Elegance die set and adhere on card base with foam dots as shown. Die cut a second ornate die as well as oval die from same set to create a frame. Adhere using foam adhesive.

Stamp assorted petals from the Small Wild Rose stamp set onto Deluxe Flower Shaping paper using Peanut Brittle ink and die cut. Stamp leaves from Large Wild Rose stamp set onto Deluxe Flower Shaping paper using Bamboo leaves ink and diecut. Color flowers with Cantaloupe ink and leaves with New Sprout and Bamboo Leaves ink. Shape petals and leaves with coordinating shaping molds. On the large flower, layer 4 layers together, on the smaller ones use two layers. Pierce the center of flowers and insert stamens, pearl in the large flower and Rock Candy in the small flowers. Adhere together with hot glue.

Stamp elephant x2 in Tuxedo Black ink, and baby sentiment in Espresso Truffle ink on white cardstock, diecut. Diecut 6 additional baby sentiment from white cardstock for layering. Color elephant using dauber with Tuxedo Black ink and Lulu Lavender on inner ears and feet, using Fantastix to add color to leaves and flowers and cheeks with New Sprout and LuLu Lavender. Use two elephant diecuts to create a more dimensional elephant. Shape using Deluxe Flower Shaping kit. Use scissors to trim one elephant at the trunk, then layer on remaining elephant using foam adhesive. Separate front legs to allow for more dimension during shaping. Color baby sentiment using Cantaloupe and Lulu Lavender inks in a gradient style. Layer sentiments together to create a thick baby sentiment.

Arrange flowers and images as shown and adhere flowers and leaves using hot glue, and elephant and baby using Dries Clear glue. Apply glue onto flowers and images as desired, sprinkle with Wisteria glitter, allow to dry.

Other Products: Die cutting machine, water mister, hot glue gun, hot glue, scissors, heatgun,ribbon, 28 lilac lane sequins, kraft wire string, stickles glitter glue yellow, ZIG Markers (dark brown, blush, light green and purple)

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Click here to view another photo of this project. The finished card measures 6 by 6 inches. Cut a piece of white cardstock paper 12 x 6 inches, score and fold at 3 1/2” and 9 1/2” on the width side. Cut 2 pieces of green paper (paper #8B): 3 1/2 x 6” and 2 1/2 x 6”. Adhere to the card base as shown. Cut 2 other pieces in a blue paper (3 3A): 3 x 5 1/4 and 2 x 5”. Paste them on the blue paper. And finally, cut 2 pieces in the 3B paper: 3 1/4 x 5 1/2 and 2 1/4 x 5 1/2” and also glue it on card. You can cut another 6 x 6” paper and glue it inside the card.

Die cut a doily with the Eyelet circle and basics small die in white cardstock. Ink the edge with the paradise teal color. Die cut a circle in the paper #3B and ink with the same color. Finally die cut another circle in the 3A paper and ink with the buttercup ink. Adhere the two circles to the doily and glue it on the middle of your card base.

Stamp on a white cardstock an animal of your choice from the tender moment collection with the archival ink jet black. Color it with zig-clean-color-real-brush-markers. Cut it with the coordinating die. Glue your animal with 3D foam to give dimension in the left of the circle. For the title, cut a sentiment in a piece of paper and ink the edge with buttercup ink and glue it to the right of the circle

Stamp the Oakberry lane blossoms flowers with archival paradise teal ink on a white cardstock. Color with buttercup color with a dauber. Cut it with the coordinate die. Shape the flowers by using the 3D Shaping Mold. Add teal stamens in the center of the flowers. Also stamp (in teal) and cut leaves in the same kit.

By using the same technique, make small wild rose in teal color with yellow stamens in the center. Also make wild aster flower but this time use art foam paper. Make flower arrangement to the left of your animal. Add leaves under it.

Stamp and cut wild aster spray in teal and yellow. Put some stickles on it to make it shine. Use it to fill the space between the flowers. Add ribbon and wire to fill the space too. Do it again under your sentiment with only one flower. To add a final touch, put sequins randomly.

Other Products: Wooden Letter Z, Blue Cardstock, White Cardstock, Distress Ink Hickory Smoke, Tumbled Glass, White Acrylic Paint, Brush, Shimmery Mod Podge, Versamark Embossing Ink, White Embossing Powder, Hot Glue Gun, Yellow Nuvo Drops, Glitter Dust.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to view another photo of this project. Paint wooden letter with White Acrylic Paint 2 or 3 coats after drying, apply mod podge using brush and dry.

Stamp images with Distress Hickory Smoke on white cardstock, and color with distress and Archival Ink using daubers, Stamp the flowers on blue cardstock using versamark embossing ink, cover with white embossing powder and heat it using heat tool. Shape the flowers using shaping mold and make three flowers. Apply clear glue on all images including flowers and embellish with glitter dust.

Stamp Baby Boy with Tumbled glass Distress Ink and color using Zig Markers.

Arrange all ready elements as pictured and embellish with Nuvo Drops.

Other Products: Versafine Black Onyx ink, spray adhesive, white cardstock, pearls, Iris cardstock

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Click here to view another photo of this project. Cut a piece of white cardstock 10” x 7” and score at 5” along the long side and fold in half. Die cut the shaped card by using the outer frame die from the HCD2-7307 Royal Elegance Frames Die set slightly over the folded edge. Score one half of the base card and fold to create an easel card. Die cut one outer frame out of white cardstock and adhere to the bottom half of the top of the card. Die cut a decorative die using the larger outer decorative die from white cardstock, add Frosting Powder using Dries Clear glue on a dry sponge on the outer decorative edge and then adhere to the card front.

Die cut three inner oval frames using the middle sized decorative frame and the plain edge oval die out of white cardstock and adhere together. Add Frosting Powder using spray adhesive and adhere to the middle of the decorative die.

Stamp the Happy Anniversary image from the HCPC3847 Celebrate Love Sentiment Stamp in Black Onyx ink on white cardstock. Using the second smallest decorative die, die cut the sentiment out and then adhere this to the centre of the frames.

Die cut a decorative die using the larger outer decorative die from the HCD2-7307 Royal Elegance Frames Die set out of white cardstock. Add Frosting Powder using Dries Clear glue on a dry sponge on the outer decorative edge and then adhere to the card base. Stamp the Let’s Celebrate image from the HCPC3847 Celebrate Love Sentiment Stamp set on white cardstock and using the second smallest decorative die, die cut the sentiment out and then adhere this to the centre of the frame.

Add pearls on the decorative dies as shown.

Stamp the rose images from the HCPC-3915 Welcome Baby Stamp set in Black Onyx ink on Iris cardstock. Colour with Zig Clean Colour Brush markers and die cut with the coordinating dies. Add Crystal Clear glitter using Dries Clear glue on a dry sponge and adhere to the top left and bottom right of the card front and the bottom right of the card base as shown.

Other Products: White cardstock, Big Shot Machine.

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Card base size is 6” x 6” (Final Size). Take pattern paper from the collection and adhere it using Designer Dries Clear adhesive. Cut one die from Courtyard Elegance Die Set on white cardstock and adhere using foam tape.

Cut one Eyelet Circle Die on white cardstock and adhere it with foam tape.

Stamp Flower images and Sentiment images from Welcome Baby Cling Stamp set on white cardstock using archival ink-jet black, and adhere them with foam tape as pictured. Add Crystal Clear Glitter.

Stamp leaf images from Leafy accents cling stamp set on vellum paper using white embossing powder, cut with coordinating die, color with Zig marker, shape and arrange them as shown.

Stamp few images from Baby’s Friends Cling Stamp set using archival ink-jet black, cut them with coordinating die and color them using Zig Clean Color Real Brush Markers using Color In Watercolor Brush-Fine. Adhere with foam tape. Add Crystal Clear Glitter.

Other Products: Cardstock- White, Archival Ink (Shadow Grey), Distress Oxide Ink (Tumbled Glass, Sugar Spun, Squeezed Lemonade, Shaded Lilac), Beads, Ribbon White, Waterbrush, Close To My Heart Ink- Fern, Scrapbook Adhesives by 3L (Dual Tip Glue Pen, Adhesive Dots Micro, E-Z Runner Ultra, 3D Foam Squares, Thin 3D Foam Squares)

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a 6 x 12”, folded in half card base from white cardstock. Find and cut out the patterned 6 x 6” card front with the green patterned border and adhere to the card base. Cut a piece of the light blue patterned paper to cover the middle section of the patterned card front. Find and cut out the “Welcome Little One” sentiment and punch a hole at each end and string white ribbon through it. Wrap around the blue patterned paper piece. Adhere to the card base using foam squares.

Using grey ink (Archival- Shadow Grey) stamp and die cut the following: 1 fence, 2 sets of the medium flowers, 1 set of the small flowers. The flowers are stamped onto Deluxe Flower Shaping Paper. The fence I stamped onto regular white cardstock. Add color to the flowers using ink and daubers: 2 small pink (Sugar Spun), 2 small purple (Shaded Lilac), 2 medium blue (Tumbled Glass), 2 medium yellow (Squeezed Lemonade). Shape the flowers using the coordinating shaping mold. Add Prills and beads to the middle of the flowers using a liquid adhesive. Let dry.

Stamp and die cut the following using StazOn ink (Jet Black): 2 of the wisteria branches and one of the rest: fox, elephant, bunny, pig, raccoon, koala. Add color to the branches using ink and daubers on the leaves (CTMH- Fern) and Zig (Oatmeal) and a waterbrush to the branch itself. Add color to the animals using Zig Clean Color Markers and a waterbrush: Koala- Grey, Mid Grey, Light Carmine; Elephant- Mid Grey, Light Carmine; Fox- Flesh Color, Orange, Light Carmine; Bunny/Pig- Light Carmine; Raccoon- Grey; Animal Flowers- Pale Green, Light Violet, Yellow.

Adhere the fence to the card using foam squares. Add the fox, elephant and bunny behind the fence. Add the shaped branches to the bottom of the fence using adhesive dots. Add the koala, piggy and raccoon using foam squares, then start adding the flowers around the animals across the branches.

Other Products: Smooth white cardstock, water color paper, shaker element, acetate sheet

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Ready side fold card measures 6” × 6”. First, cut a 6” × 6” card panel from designer paper collection and trim it from all four sides. Cut circle from designer paper using circle basics large die. Also cut some rings from white cardstock using circle die. Glue all rings on circle piece of designer paper. Add some shaker elements and close it with circle piece of acetate sheet. Glue a white cardstock ring on it. Adhere card panel on ready card base.

Cut 2 decorative pieces from white cardstock using heart of joy decorative die. Glue it on card using foam dots as shown. Glue shaker circle on it. Stamp some images from Baby’s Friends and Welcome Baby stamp on watercolor paper using black archival. Cut images using zig markers. Arrange images on card. Cut a sentiment from designer paper and mat it on white cardstock. Glue it on card as shown.

For finished look, apply glitter using adhesive that dries clear.

Other Products: Martha Stewart scoreboard, white pearl cardstock, glue stick gun

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.

Instructions: Create card base, take A4 white paper and fold in half, take Baby's Air Balloon Die and cut careful on folded edge. Cut single Baby's Air Balloon Die from paper collection and glue it to the base of card.

Stamp on paper collection balloon using Baby's Air Balloon Cling Stamp Set with Ranger Archival Ink Pad - Manganese Blue and cut using the coordinating dies. Adhere to the card base using Dries Clear Adhesive.

Stamp on the white paper sheep using Baby's Friends Cling Stamp Set with Ranger Archival Ink Pad - Jet Black colour flower with green and pink pencil.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Manganese Blue and cut using the coordinating dies. Colour with Ranger Archival Ink Pad - Manganese Blue. You will need 2 petals for each flower to create flowers. Use an iron or heat gun to heat the petals and when they start to shrink move them on the Molding Mat and press on the middle using shaping tool - using large one. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Memento Dye Ink Pad - Bamboo Leaves, cut out with the coordinating die, shade use this same ink and shape using Mold as shown on the video.

Stamp sentiment with using Baby's Air Balloon Cling Stamp Set with Ranger Archival Ink Pad - Manganese Blue. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: White cardstock, die cutting machine, funnel tray, paper trimmer, dimensional adhesive, Wisteria glitter

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut white cardstock to 6 3/16 x 9 3/4”, score and fold at 4 7/8”. Cut paper from paper collection to 4 3/4 x 5 3/4”, ink edges with Teal Zeal ink and adhere directly onto card base. Cut a slightly smaller piece to 4 1/2 x 5 3/4”, color edges with Desert Sand ink and adhere onto card base using foam adhesive. Cut white cardstock to 4 1/4 x 5 1/2”, diecut a small circle three times along the right-hand side of panel (reserve one circle), then stamp special day sentiment on bottom left side using Teal Zeal ink. Apply glue to sponge, dab glue along edge and sprinkle with Rajni Chawla’s Crystal Clear. Adhere onto card base using foam adhesive.

Stamp bunny, raccoon and fawn onto white cardstock using Tuxedo Black ink and die cut. Color Bunny using Summer Sky ink, racoon with Tuxedo Black ink and the fawn with Desert Sand and Potter’s Clay ink. Use Fantastix to add accents to animals, use Lulu Lavender add to ears and cheeks, New Sprout to foliage and Lulu Lavender and Teal Zeal onto florals. Shape with Deluxe Flower Shaping Kit, use scissors to trim as needed, then layer inside circles, peeking out as desired.

Diecut ornate Elaborate Oval from white cardstock. Adhere onto card base using foam adhesive. Stamp Birthday sentiment onto reserved circle die using Bamboo Leaves ink, adhere with foam adhesive. Apply glue and Wisteria glitter as desired, allow to dry.

Other Products: Adhesive backed foam, copic markers, white cardstock

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Create a 5 inch x 7 inch card base. Cut a strip of blue and yellow striped paper from the Tender Moments Paper Collection, distress with Summer Sky and adhere to the bottom of the card front. Cut out the Sweetheart Borders Die in white and adhere to the card front under a piece of blue designer paper that is adhered to the top of the card. Cut out the center frame from the Elaborate Oval Frames Die in blue designer paper and the smaller lace die in white cardstock, stamp the welcome from the Welcome Baby Cling Stamp Set and cut out with the oval die from the Elaborate Oval Frames Die. Adhere these together, with the sentiment adhered with foam tape to the left side. Stamp the raccoon from the Baby's Friends Cling Stamp Set and the words ‘Baby’ and ‘Boy’ and the roses from the Welcome Baby Cling Stamp Set. Color with copics and cut out with corresponding dies, cut additional dies to give dimension to images. Adhere to card with foam tape, as pictured.

Stamp the flowers from the Classic Rose Cling Stamp Set in Summer Sky and sponge with Buttercup and Summer Sky, cut out with coordinating dies, sculpt with the Rose Shaping Mold, add glitter.

Stamp the leaves from the Classic Rose Cling Stamp Set in Bamboo Leaves and sponge with Bamboo Leaves, cut out with corresponding dies and sculpt with Rose Shaping mold.

Adhere roses and leaves as shown.

Other Products: Early espresso & basic gray ink pad – stampin up!, copics:- B000, N1, N2, N4, N7, BV000, E71, 7.5” white square card base, clear embossing powder, brushed corduroy embossing powder – Tim Holtz, Shabby white embossing enamel – stampendous, black versafine clair ink, foam pads, hot glue, stamping platform, foam pads

For more tips on creating with the Tender Moments Collection watch the tutorial at https://youtu.be/FZhOcxh4kgY.

Instructions: Cut a paper from the collection and a piece of kraft card slightly smaller than the card base. Adhere the paper to the card base.

Rag the edges of the kraft card and tear it top right. Edge with early espresso ink.

Die cut 2 semi circles from the rounded scallop window die using black card and cut the solid shape using paper from the collection, adhere these to the die cuts. Cut 3 partial semi circles. Arrange these diecuts onto the card and secure with dries clear glue.

Dab/dot dries clear glue onto the card using a sponge and sprinkle with the shabby white embossing powder, remove the excess and heat to melt. Use daubers to add a little early espresso ink onto the papers behind the black die cuts. Secure the kraft card onto the card base using dries clear glue.

Die cut a black circle from the decorative circle frames die and adhere to the card bottom left using foam pads. Stamp the sentiment onto Kraft card using versafine black ink, cover with clear embossing powder, remove excess and heat to set. Die cut with the arrows and banner die set and ink the edges with early espresso ink. Curl the sentiment and add over the black circle using dries clear glue.

Die cut 2 keys and hinges using luxe gold card. Add 3 hinges to the outer edge of the card and 2 keys to the arrow using dries clear glue.

Use a stamping platform to stamp the hot air balloon using early espresso ink onto kraft card, cover with brushed corduroy embossing powder, remove excess and heat to set. Colour lightly using copic markers. Die cut 2 further balloons and adhere these together using dries clear glue. When the glue has dried die cut the rope and basket opening on the balloon, then edge the balloon with early espresso ink.

Stamp the animal using black memento ink onto white card and colour using copics. Die cut and edge the animal with basic gray ink. Tuck the animal into the basket of the balloon and adhere into position.

Use foam pads and hot glue to secure the balloon in place.

Other Products: Dandelion Memento Ink, White Cardstock , Glossy Accents, Hot Glue Gun, Cardboard from Shipping Box, Paper Trimmer, Die Cutting Machine, Water Spritzer Bottle

For more tips on creating with the pocket accent dies, watch the tutorial at https://youtu.be/A8sxtkGXWLQ.

Instructions: My card is 6 x 6”. Make card base and cover the front and inside with coordinating pieces of the card stock. Using one of the dies of the Pocket Accent Dies, cut the shape into the card front after you decide how far back you want it to be from the edge of the card. Next using the die for the decorative piece of these dies cut a piece using white card stock. Glue this to the edge of the card front matching the edges.

Using Rich Cocoa Memento ink, stamp the flower petals and then using coordinating dies cut them out. Color the petals using Morocco ink in the center then I blended using Bamboo Leaves ink. I did another layer of color using Dandelion and Cantaloupe inks and lastly, I did a layer of Archival Sunflower Ink on the tips of the petals. Spritz the backs of the petals and use the Flower Shaping Kit to shape. I pinched the ends of the petals and bent them to the right to give them a bit of interest. Layer two petals together and add my homemade sunflower center. It is made up of the prills and Redlands Elements. It is dark brown with a hint of red and I love the look. Set the petals aside to dry. Once dry, I used a brush and painted the petals with Glossy Accents. Set the flowers aside to dry.

Using Archival Fern Green, stamp the leaves and color with Bamboo Leaves. Use coordinating dies to cut them out. I didn’t shape the leaves but I did add Glossy Accents using a brush. Set them aside to dry.

Stamp the sentiment on white card stock and cut it out with a paper trimmer, I edged the white cardstock with Bamboo Leaves ink and then glued to a mat of coordinating paper from the collection. I cut a piece of a shipping box and glued it to the back of the sentiment piece and then glued it to the card.

I decided on the placement of my flowers and leaves and hot glued them down onto the card. The card is finished and ready to go.

Other Products: Ranger Distress Walnut Stain, Ranger Distress Ink Peeled Paint, Ranger Archival Ink Rose Madder

For more tips on creating with the French Cottage Collection watch the tutorial at https://youtu.be/cATv3wk2_sM.

Instructions: Cut white card base and fold with dimensions of 6 1/4" x 6 1/4". Cut a paper 6” x 6” from HCDP1-2114 French Cottage Paper Collection and glue. Cut paper collection with dimensions of 5 3/4” x 5 3/4” and glue.

Stamp images from HCPC-3908 French Doorway ink Memento on white cardstock and paint them using Ranger Distress Ink Walnut Stain. Cut all the images using their coordinating dies. Glue as shown.

To create flowers, stamp the flowers from the HCPC-3909French Cottage 'scapes set on the Deluxe Flower Shaping paper a few times using Archival Ink-Rose Madder and die cut using the coordinating dies. Shape using Deluxe Flower Shaping Kit cover the center of the flowers with glue and add Ribbit Prills.

To create leaves, stamp the leaves from the same sets on the Deluxe Flower Shaping paper with Distress Peeled Paint ink, die cut with the coordinating die, shade using this same ink.

Put all the elements as pictured.