Other Products: White cardstock, Archival Ink Pad-Violet, Big-Shot Machine, Gold Beads.

Instructions: Card final size is 6 3/4” x 5 1/4” (tent fold card). Cut shaped card base. Cut one decorative die of HCD2-7350 Royal Gateway Die on white cardstock and the base die on pattern paper, distress the edges and adhere both the layers on the card base using Designer Dries Clear Adhesive, as shown.

Stamp one image from HCPC-3955 Clematis Spray Cling Stamp Set on white cardstock, cut it with coordinating die, color it using Zig Markers and adhere it using foam tape.

Stamp some clematis flowers and leaves images HCPC-3954 Clematis Cling Stamp Set on Deluxe Flower Shaping Paper using archival ink- Majestic Violet and Library Green for leaves. Cut them with Coordinating die HCD1-7355. Color them using archival ink-majestic violet, violet, leaf green and for leaves- leaf green, library green and touch of majestic violet. Shape them using HCFB1-5006 3D Clematis Shaping Mold and use groove tool also to give some more dimension. And for the centre, color these petals with leaf green and on the edges color them with majestic violet and fringe cut them. Add one layer of fringe petals and then add gold beads, then sprinkle crystal clear glitter using Designer Dries Clear Adhesive. (For middle flowers, total of four flowers are made.) And for smaller clematis flower, add some gold beads and then sprinkle crystal clear glitter using Designer Dries Clear Adhesive.

Arrange these flowers and leaves as pictured.

Other Products: Foam tape, white embossing powder, vellum cardstock, scoreboard, round corner punch.

Instructions: Create a card base of size 6 by 8” and mat pattern papers from the climbing clematis paper collection. Cut the decorative border from the starry night die set and glue on the card base. Take a 5 by 5” piece of pattern paper and create a mini envelope using a scoreboard or an envelope punch board. Adhere the prepared envelope on the card using foam tape.

Stamp the flowers from the clematis cling stamp set with archival fern green and color using Majestic Violet. Stamp and color the leaves from the leafy accents stamp set with archival fern green. Cut and shape the flowers and leaves using their coordinating dies and 3D shaping molds.

Stamp the tiny butterflies from the large floral Butterfly cling stamp set on vellum and heat emboss in white. Cut the butterflies using their coordinating die and further cut them separate with scissors.

Arrange everything as shown and dust the flowers with crystal clear glitter powder. Add a sentiment from the Elaborate birthday cling stamp set.

Other Products: Smooth White Cardstock, Heat Tool, Die Cutting Machine, Score Board, Funnel Tray, Bone Folder, Foam Tapes.

Instructions: The ready top fold card measures 8" by 6". To prepare the white card base, cut one piece measuring 8" by 6" and the second piece 8 1/2" by 6". Score the second piece at 1/2" on the longer side and glue the first piece on top. For the topmost layer, choose the pattern paper from the paper collection and cut 71/4" by 5 1/4" and distress the edges using sharp scissors. Next, glue the panel first on white cardstock and then on the deep purple pattern paper, making the border of 1/18" on all the sides. Add dimensions using foam tapes.

Die cut one piece each of fancy frames from white cardstock and pattern paper using Intricate Swirl Frames Die. Stack both the die cuts together keeping the colored one on top to add extra strength. Layer the die-cut on the ready card panel as shown.

Stamp the special day sentiment from the Fancy Special Day Cling Stamp Set on white cardstock using Fern Green Archival ink and cut it using its coordinating die. Layer the sentiment with foam dots on the white solid base, cut using the same die set.

Stamp the florals with Cactus Flower Archival ink on flower-making paper using Clematis Cling Stamp Set. Cut the florals using its coordinating die set and color the flowers using Magenta Hue and highlight them using Majestic Violet Archival inks. Spritz water and shape the flowers using golf groove tools. Prepare 3 large flowers of 2 petals each and 5-6 filler flowers using the one smallest petal each. For the flower centers, cut a strip of paper, color it using Buttercup Yellow, and thinly fringe the strip using scissors. Roll the fringed strip between your fingers and add prills on the tips using an adhesive that dries clear.

Stamp Leafy foliage from Leafy Accent Stamp Set with Olive green on flower making cardstock and cut them using its coordinating die set. Paint the leaves using Leaf Green Archival ink and shape them using golf groove tools.

Stamp the image from Clematis Spray Cling Stamp Set on white card stock and paint the image using Zig Clean Clear Brush markers. Cut the painted image using its coordinating die. Also, stamp the butterfly border from the Large Floral Butterfly Cling Stamp Set on white cardstock and paint it using Zig Clean Clear Brush Markers. Cut the butterfly border using its coordinating die. Cut apart all the tiny butterflies and display them randomly on the card front. Keep the remaining ones for future use.

Once all the elements are ready, assemble a small cluster of flowers on the top of the card as shown and finish the card by adding sparkles.

Other Products: Iris cardstock, foam squares, stamp positioner

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of dark pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card front.

Die cut the gold frame out of the HCD1-7327 Elegant Swirls Gateway Die using the No.2 and No. 3 dies. Adhere the outer frame with foam strips and then adhere the inner strip to the inside of the frame. Die cut the centre out of pattern using the No. 3 die from the HCD1-7327 Elegant Swirls Gateway Die set and adhere to the centre of the frame as shown. Die cut the eyelet tag out of gold cardstock from the HCD1-7202 Album Tags & Accents Die set. Die cut the inner tag using the inner tag out of the pattern paper. Stamp the sentiment from the HCPC-3844 For My Friend Sentiments Cling Stamp Set in Jet Black ink using a stamp positioner and adhere to the front of the eyelet tag. Adhere the tag to the centre of the frame with foam squares.

Stamp the small clematis floral spray and the straight clematis floral spray from the HCPC-3955 Clematis Spray Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere the small floral spray to the top of the frame as shown with a double layer of 3D foam circles. Adhere the straight floral spray to the base of the frame with a double layer of 3D foam circles.

Stamp the birdhouse and bird images from the HCPC-3956 Clematis Birdhouse & Trellis Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Adhere the birdhouse to the left. Adhere a bird on the birdhouse and one to the right of the floral spray as shown.

Add Lemon Chiffon Prills to the centres of the flowers as shown.

Other Products: Smooth White Cardstock, Dimensional Tape, Hot Glue

Instructions: Ready side fold card measures 6.25” × 8”. Take a piece of designer paper measuring 6” × 7.75" and adhere it on ready card base. Further, cut another designer paper measuring 5.5” × 7.25" and mat it on white cardstock which is 1/8 of an inch bigger from all four sides. Adhere it on card using dimensional tape. Cut white cardstock using Teardrop Lattice Gateway Die and glue it on card using dimensional tape as pictured. Cut white cardstock using Album Tags and Accents Die and gold cardstock using oval die. Trim die cut and arrange on card as pictured. Cut a sentiment die cut from white cardstock and glue it.

Stamp Clematis flowers on deluxe flower shaping paper using cactus flower ink and cut with coordinating dies. Paint flowers using same ink. Stamp leaves using fern green ink and cut with coordinating die. Paint leaves using leaf green ink. Shape flowers and leaves using 3D Shaping mold. Further shape flowers more using groove golf tool. Pierce the center and add Rock Candy Stamens. Arrange flowers and leaves on card in desired manner. Once satisfied with arrangement glue all elements using hot glue. For finished look, add glitter on flowers and leaves using Art Glitter Dries Clear adhesive.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, sewing thread, cheesecloth, stampin’pen chocolate, Strathmore watercolor paper,

Instructions: The finished card measure 7 x 6 inches. Cut a piece of white deluxe flower shaping paper 12 x 7 inches and score at 6 inches to make a side fold card base. Cut 1 piece of paper 5 5/8 x 6 5/8 inches in sheet #1B. Cut 1 piece of paper 5 1/4 x 6 1/4 inches in white cardstock. Cut 1 piece of paper 5 x 6 inches in sheet #11A. Glue all those layers on the card base.

Stamp in Majestic violet sentiments on a green paper and die cut with die from the Circle Basic large die. Ink the edge and adhere with 3D foam on and other circle paper from violet paper this time. Adhere on the right corner.

Stamp your Climbing Clematis flowers with Majestic Violet ink onto white flower shaping paper, color the centre and shade the edge with the same color. You can also color the back of the flowers. Diecut with the coordinating die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. Glue 2 layers together. In the center of the flowers make a hole and add stamens.

On a watercolor paper, stamp up in leaf green ink and cut with coordinated dies leaves and lawn from the Countryside Cottage Collection and color it with green Zig markers.

On a watercolor paper stamp up in sepia ink fence and cut with coordinated dies from the Tulip Time Collection and color it with chocolate marker. Do the same thing with the Clematis Birdhouse & Trellis. Color the flowers with light violet and violet Zig markers. Glue it on you card base. Glue your leaves, flowers on it and lawn down to your fence.

To add the final touch, make dots with the nuvo crystal drops dandelion yellow.

Other Products: Foam pads, Copic Y35, RV11, YG03, YG63, versafine clair black ink, clear embossing powder, pink ribbon

Instructions: Remove one of the panels from the card base. Die cut the largest solid shape from the gateway die using pink paper from the collection and edge with rose bud memento ink. Adhere to the card base.

Die cut the decorative die from the gateway set using coordinating paper from the collection and use the next size die to create an aperture. Select a scene panel from the paper collection, cut to fit the aperture and glue into place on the card base.

Die cut a white oval using the 3” x 4.25” oval and die cut the centre using the 1.75” x 3.25” oval. Adhere around the springtime scene in the centre of the card.

Die cut the largest ornate oval using pink paper from the collection and die cut the centre using the 2.25” x 3.75” oval. Edge with rose bud ink. Make a frame using the 3” x 4.25” and the 2.25” x 3.75” ovals and adhere this to the back of the pink oval to add strength and add to the centre of the card using foam pads.

Stamp the tree using rich coca ink and die cut, colour using toffee crunch ink. Cut the tree trunk in half and hot glue the top and bottom parts to the side of the oval, leaving a gap in the centre.

Stamp 9 of the spring flowers onto flower shaping paper using toffee crunch. Colour using copic makers and diecut. Shape with flower shaping tools and add to the tree using hot glue. Add dries clear adhesive to the flowers, sprinkle with crystal glitter and remove excess

Stamp the sentiment onto a tag in black ink and clear heat emboss. Die cut and adhere to a white tag. Add this and a spring flower set to the tree trunk using hot glue to camouflage the gap in the tree.

Other Products: Antique Linen, Victorian Velvet and Seedless Preserve Distress inks, Mudra Indian Ornate Mandala Stencil, Spellbinders tan embossing mat, large oval makeup blending brushes, CrafTangles Foil Magic, CrafTangles black reactive foil, double sided foam adhesive and mixed color pearls.

Instructions: Emboss a piece of 4 1/4" x 5 1/2" Deluxe Flower Shaping cardstock using Mudra Indian Ornate Mandala Stencil and Spellbinders tan embossing mat. Leave the stencil in place and blend Antique Linen, Victorian Velvet and Seedless Preserve Distress inks on the cardstock using large oval makeup blending brushes to create an ombre look. Remove the stencil and cut it to create 2 pieces and adhere them on black cardstock strips to create a thin border on the long sided. Adhere these pieces on a 4 1/4" x 5 1/2" white card base as shown.

Take a little CrafTangles Foil Magic on Hydra Sponges and apply it on the stamp from Fancy Special Day Cling Stamp Set and quickly stamp it on white cardstock. Let it get dry tacky (1-2 minutes) and then apply CrafTangles black reactive foil on top and burnish it to transfer the foil to the raised areas of the stamped image. This will give a beautiful, distressed look. Now die cut the sentiment using the matching die from Fancy Special Day Die. Adhere it on a piece of black cardstock and fussy cut it to create a thin black border. Adhere it on the card front using double sided foam adhesive. Add a few pearls on the background and the sentiment to add finishing touch.

Other Products: Die cutting machine, watercolor markers

Instructions: Cut out the white base of the card and fold it to 8" x 5 3/4". From the paper collection, cut a 7 3/4” x 5 1/4" rectangle and glue to the base. From the white paper, cut out the 4 largest frames from the Eyelet Frame Gateway Die set. Cut out the centers in the frames with smaller and smaller frames from the set. From the white paper from the Regal Lattice Gateway Die set, cut the smallest frame and glue the frame with a hole on the penultimate order as shown. Glue the frames evenly on top of each other with Adhesive Foam Strips. From the paper collection, cut a green frame with the Eyelet Frame Gateway Die and glue it on top. Add Nuvo Crystal Drops - Gloss White.

To create flowers, stamp the Clematis Cling Stamp Set on the Deluxe Flower Shaping paper a few times using Ranger Archival Ink Pad - Deep Purple then shadow with the Ranger Archival Ink Pad - Rose Madder ink and die cut using the coordinating die. Form with the coordinating mold. Place the Rock Candy Stamens-Small in the center.

To create leaves, stamp the Leafy Accents Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Leaf Green, die cut with the coordinating die, shade using this same ink. Shape leaves using 3D Leafy Accents Shaping Mold.

Stamp an image from the Wild Aster Spray Cling Stamp Set using Fern Green Archive Ink. Cut out the image with a matching die. Color with watercolor markers.

To create leaves, stamp the leaves from Clematis Cling Stamp Set on the Deluxe Flower Shaping paper with Ranger Archival Ink Pad - Library Green, die cut with the coordinating die, shade using this same ink and Ranger Archival Ink Pad - Leaf Green. Shape leaves using 3D Mold.

Stamp Sentiment with Ranger Archival Ink Pad - Rose Madder on a strip of paper, cut with scissors. Arrange everything as pictured. Finally, add sentiment. Cover with glue and glitter.

Other Products: Stamping Up water colour pencils:-Gorgeous Grape, Garden Green, Razzleberry, Early Espresso, Daffodil Delight, Old Olive. Other: Double sided tape, Double sided foam Tape, Hot glue Gun, Fussy cutting scissors, Glitter, Pattern making tracing tool, Ruler.

Instructions: This is a twisted triangle easel card, 6“ x 6“. Using the white card stock to make the card base by cutting this to 12" x 6", make the fold at 6 “. Make a diagonal fold from the card front from the left foot corner to the top right corner.

Find the design paper sheet 2B in the collection paper pad. Use this to mat the card fronts. The only part that is not matted is the back of the card. Cut all the card matting a little smaller than the card base. Using the pattern making tool, the stamp mat pad and a ruler to make small holes along the matting edges. Adhere all the matting in place using the double sided tape

Make the sentiment by stamping with the sepia ink onto the white card stock, die cut this plus 3-4 extra die cuts. Adhere all together then adhere to the card inside at the foot, to the right.

Taking the eyelet oval die set and die cut using the outer part of the die. Do this twice from the design paper sheet 11B and 3-4 times from the white card stock. Adhere all together, having the front and back of the frame showing the design paper. Apply glitter to the frame by applying the adhesive with the hydra sponge then sprinkling the glitter over this. When dry tap away the excess, using a tray to catch the glitter. Adhere this to the card front at the right side of the fold in the card front. (so the half of the frame is open when the card is open.

All the rest of the stamping is done with the library green ink. Make two birdhouses buy stamping and cut out using the matching die. Stamp and cut out the clematis flowers. Use the color list to color in the images. Bring shape to the flowers by using the collection mold, use the flower shaping tools in the flower centres to shape the flowers more. Apply adhesive to the flower petals the same as the eyelet frame. Apply a little clear drying adhesive to the flower centres and sprinkle the prill beads to the centres. When dry tap away any excess prills.

Adhere first the birdhouses to the card front, in the frame as shown. Arrange the flowers around the birdhouse and frame then adhere with the hot glue gun. Do the same for the card stop, above and to the left under side of the sentiment.

Other Products: White Cardstock, Die Cut Machine, Scor-Tape, Purple Ribbon, White Embossing Powder, Heat Gun, Magnet, ColorBox Frost White Pigment Ink

Instructions: Using white cardstock, die cut the center of the Rounded Window Frame Die. Using the circle die, cut out a piece of the paper collection. I chose sheet 9A which is blue. Glue to the Window Frame Die and set aside.

Stamp the Clematis Trellis using Rich Cocoa Ink. Color in the flowers using Majestic Violet ink and a dauber. Cut out the Trellis using the coordinating die. Then use a circle die from the Eyelet Circle & Basics dies and cut the trellis. Adhere to the center of the piece. Glue the magnet to the back of the decorative circle and cut another circle out of white cardstock and glue to the back to cover the magnet. This will also keep it from scratching your refrigerator.

Stamp the flowers using Art Foam Paper and Lulu Lavender ink. Using a dauber and Majestic Violet ink color the center of each petal. Cut out with coordinating dies and then shape using a heat gun. Add Prills to the center of the petals and allow to dry. Stamp the leaves with Fern Green ink and color with Leaf Green ink. Use coordinating die to cut out the leaves and shape with heat gun. Set aside.

Stamp the butterfly onto vellum using white pigment ink and then emboss with white embossing powder. Use coordinating die and cut out the butterfly. Color the butterfly with Majestic Violet and Sunflower ink then I added just a tiny bit of Tiger Lily. You can color on either side of the butterfly but I chose to color on the back which gave it a more subtle look.

Tie a bow in the ribbon and use Scor-Tape and glue to adhere to the bottom of the refrigerator magnet. Decide on placement of flowers and leaves and glue down. To finish, decide on placement for the butterfly and glue it down.

These magnets are a quick and easy project and can be given as a little gift to a friend or loved one. I also have several gracing the front of my refrigerator as well. Enjoy!

Other Products: Paper trimmer, ruler, cutting machine, white paper 120g, felt-tip pens

Instructions: Use the white cardstock HCPP1-438-2 to prepare a 4.5” x 6” fold-out base. From the green sheet 1B of the Climbing Clematis collection, cut a 2.5” x 5.75” rectangle. From the white cardstock, cut a 1.75 x 5.75” strip. Glue to the base as shown, white on the left and green on the right. Add pieces of thin strips of luxe gold cardstock as shown.

Stamp the large semicircular flower arrangement twice on white cardstock. Use Pebble Beach ink. Cut with matching dies. Colorize with felt-tip pens / markers in shades of pink and green. Glue as shown to form an oval flower arrangement. Use round 3D Dots. On a fragment of a white card with a thickness of 120g, stamp the sentiment from the HCPC-3843 Special Birthday Sentiments set. Use the color of Bamboo Leaves. In the free space created from the garland, adhere a round 3D Dot. Then slide the writing through the center between some of the leaves as shown. Gently smear the sides of the strip with the lettering with glue and attach.

A spring card that's easy to prepare. Give it to a loved one.

Other Products: White cardstock, Shimmer additive, Acrylic yellow dots, pearls, Copic Markers: V01, V12, V15, V17, Y11, Y15

Instructions: Card size: 4 3/4 x 7 1/8”. Side fold. Place die on a piece of White cardstock folded to 5 x 7 1/2" with the left side hanging over the edge just past cutting edge to get as full as possible to card size. Cut another front to get complete shape then glue it to the card base. From decorative lavender papercut the decorative inside with the outer edge outline and inner outline as well (tape dies together to get the best spacing). Place the Happy Birthday die somewhere on the inside (it will cut separately so it does not need to be taped in place. Sponge all the edges of lavender die cuts then glue them to the card front with the Happy Birthday in the center of open spot.

Stamp the butterfly and fern with Memento Tuxedo Black, die cut and color. Stamp the filler with Fern Green, sponge with yellow, die cut. Stamp the Clematis with Deep Purple, sponge with Majestic Violet, die cut. Stamp Clematis leaves with Fern Green, sponge with Leaf Green and Majestic Violet, die cut. Use the shaping mold to form the flowers and the leaves. Fringe some yellow cardstock and roll to make Clematis Stamen. Glue into centers then add Prills.

Pop up butterfly body at the top right side of card then add pearls to the tail end to form a flight trail. (If you don’t have yellow pearls just dye the pearls using alcohol ink like Copic).

Start at the bottom left side to arrange Clematis and leaves going upward on the die cut trellis. Insert the yellow Rose Hip Stamen and white Pollen Stamen. Insert the fern and yellow filler flowers. Add Nuvo drops of yellow or Liquid Pearls to the filler flowers to add interest. Glitter all the flowers and the card front randomly. Add yellow acrylic dots where desired to finish arrangement. Use a brush to “paint on” shimmer/lacquer mixture on the fern and leaves.

Other Products: Dimensional adhesive, paper trimmer, die cutting machine, yellow card stock.

Instructions: Make a square 6” by 6” card base from white card stock. To make this, cut paper to size 12” by 6”. Score at the 6” mark on the longer side and fold to make a top folding card. Add a mat layer cut from silver card stock that is little smaller than the card base. Add a second mat layer cut from the paper collection. Cut out border design from the paper collection and add to the left side of the card using dimensional tape.

Cut white die cuts from the Lattice flourish gate way die using only the upper arch of the die. Cut a decorative window die cut in white card stock from the Elegant swirl gateway die. Adhere the window on the card front towards right.

Stamp the clematis spray image on the Flower shaping paper with black ink and colour with Zig real brush pens. Cut with coordinating die. Stamp the flowers with the majestic violet ink on deluxe flower shaping paper and the leaves with Library Green ink. Colour the clematis flowers and leaves with Archival inks using sponge daubers. Cut with matching dies and shape and mold the flowers in 3D flower shaping mold. Add a center using the fringed yellow card stock. Add to the flowers.

Add the spray in layers on the arch die cut. Add the spray images on the base of the window die cut. Arrange the flowers and leaves on the side of the card.

Use a sentiment from the Wild Aster paper collection to finish the card.

Other Products: Hot glue gun; Die Cut Machine; Paper Trimmer; Scor-Pal; Tiny Gems; Color Box Pigment Ink Pad Frost White

Instructions: Prepare a 5” x 7” white card base with a piece of the Climbing Clematis paper (11B) on top that is 1/8” smaller.

Cut the Decorative Circle out of white and adhere to the card. Use the next size down and cut it out of more of the 11B paper. Add foam dots to the back and adhere on top of the first one. Cut the next size circle out of white, stamp the sentiment in the center with the Deep Purple ink and adhere on top of the other circle.

Stamp 2 of the Clematis Sprays on white with the Deep Purple ink and color in with the Zig Markers. Adhere one to the top and the other to the bottom of the circle as shown.

Stamp the Butterflies on Vellum with the White Color Box, heat emboss with white powder, cut out with the coordinating die.

Stamp the Flowers on white with the Deep Purple. Cut out with the coordinating die and ink the edges with more of the Deep Purple. Place in the matching mold and run through the Die Cut machine to shape. Use the Golf tool and put a small hole in the center to put the stamens through, secure with hot glue.

Adhere everything on the card. To finish, add glitter to the flowers and spray. Add tiny gems to the Butterflies.

Other Products: White Cardstock, black embossing powder, pigment ink, heat gun, foam tape

Instructions: Create a 5 x 7 inch card base. Cut a piece of purple cardstock from the Climbing Clematis Paper Collection 4.5 x 6.5”, distress with Vibrant Violet and adhere. Cut the fence from the paper collection, slightly smaller than the purple matt, distress with Vibrant Violet and adhere to card front. Cut out the frame with the Ironwork Sentiments Die in white cardstock, distress with Vibrant Violet and adhere with foam tape as shown, cut out the Thank you sentiment from the same die in purple paper from the same collection and adhere.

Stamp the birds from the Clematis Birdhouse & Trellis Cling Stamp Set and 2 of the large curved sprays from the Clematis Spray Cling Stamp Set in pigment ink and heat emboss with black embossing powder, color with Zig markers and cut out with coordinating dies, adhere with foam tape to ova.

Stamp the Clematis Cling Stamp Set in Vibrant Violet, sponge centers with Vivid Chartreuse and the outer petals with Iris, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold, add bead stamens to small ones and glitter. Stamp and the leaves from the Clematis Spray Cling Stamp Set in Fern Green, sponge with same, cut out with coordinating dies and sculpt with the 3D Clematis Shaping Mold.

Arrange flowers and leaves as pictured.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine,

Instructions: For the base use Gateway Fold Card – White. Cut panel using outside die Scalloped Flourish Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Scalloped Flourish Gateway Die outside frame from gold luxe paper and place using Adhesive Foam Strips. Cut using frame die from paper collection and adhere to the front of the shaped card using Adhesive Foam Strips.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers for bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flowers with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add dries clear adhesive around flower stamen and sprinkle Ribbit Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create leaves, stamp Clematis Cling Stamp and Large Floral Butterfly Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Special Birthday Sentiments Cling Stamp Set on a piece of the paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Hot glue, paper trimmer/scissors, black fine pen, gold wax, gel pens, versafine onyx, clear heat embossing

Instructions: Stamp in Leaf Green Leafy Accents onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and die-cut, edge with Fern Green. Spritz Leafy Accents and run through the die-cutting machine in 3D Leafy Accents Mold. Apply lacquer and glitter and leave to dry.

Stamp in Deep Purple onto Deluxe Flower Shaping Paper and colour the centres with Vivid Chartreuse using Stack and Store Daubers, Sky Blue/Forget Me Not to the petals, die-cut and edge with Deep Purple. Use the Deluxe Flower Shaping Tool Kit to shape the petals and cup the centres. Use hot glue to adhere the petals together, add Dries Clear to the centre and add prills.

Stamp in Bright Tangelo onto Deluxe Flower Shaping Paper Large Garden Zinnia, die-cut and edge with Tea Rose. Spritz and run through the die-cutting machine in the Large 3D Zinnia Shaping Mold. Adhere petals together with hot glue and thread white stamens, secure with hot glue and cut off excess cord.

Stamp in Sunflower Yellow onto Deluxe Flower Shaping Paper the Fragrant Hyacinth colour with Buttercup and die-cut, shape with Deluxe Flower Shaping Tools and hot glue the petals together, pierce the centre and thread a stamen through securing with hot glue to the back and cut off excess cord.

Mat and layer Eyelet Frame Gateway edge in Deep Purple, die-cut Regal Lattice Gateway in black cardstock and add gold wax.

Stamp in black versafine and clear heat emboss Large/Floral Butterfly and colour with Zig Clean Color Real Brush Marker, die-cut. Add gel pen and nuvo drops when dry.

Die-cut 10x Elegant Pocket Accents Die corners in Luxe Gold Cardstock.

Create the cabinet with 2x shadow box 2 1/2 x 7” and 1x 5 x 7”. To create the 5 x 7” shadow box cut black cardstock to 9 x 11”. Lay portrait in Scor-Pal and score 4x every 1/2” (1/2, 1, 1 1/2, 2”), turn the cardstock and repeat on all 4 sides. Lay the cardstock portrait and score 2 1/2” to the length of 1” and 6 1/2” to the length of 1”. Repeat on the opposite side only. Cut down these new score lines then outward diagonal for the 3rd score line and straight down for the 4th score line and repeat. Cut along the horizontal score lines at 2” until the section is cut away (photos will be on my blog).

Create 2x 2 1/2” shadow box in the same way as before with cardstock cut 6 1/2 x 11”. Lay portrait in Scor-Pal and score 4x every 1/2” (1/2, 1, 1 1/2, 2”), turn the cardstock and repeat on all 4 sides. Lay the cardstock portrait and score for 1” length at 2 1/2” and 4”, repeat on the opposite side and cut as before.

Crease all score lines and adhere both straight sides then pull the shaped sides over the top and adhere (this will give a mitered corner).

To create the cabinet cut 2x 4 1/2 x 7” black cardstock lay portrait and score at 2 1/2 and 3 5/8”. Adhere the small shadow boxes level to the edge between the score lines is the spine and the small tab is to adhere to the back of the 5 x 7” shadow box.

Use Rectangle basics and mat and layer Floral Butterfly edging with Deep Purple and adhere to the back of the cabinet this will cover the tabs. Mat and layer Eyelet Frame Gateway and stamp ‘Thinking of You Today’ with Forget Me Not and Deep Purple (adhere with dots after complete).

Cut to size purple Floral Butterfly Paper Collection and line the inside of the shadow boxes (if prefer add paper to the centre prior to adhering the shadow box sides).

Adhere a landscape corner to the top of the closed cabinet and adhere each half of the mat and layer created earlier. Die-cut 3x Window Hinge in black cardstock and gold wax, cut 1x in half and adhere the left-hand side. Under the right-hand side adhere a magnet. Adhere 2Hinge mats together and secure the magnet within the right-hand side. Adhere the left-hand side only to the cabinet leaving the magnet side free to open and close. (tip: allow the 2nd magnet to attach to the first prior to adhering within the hinge mat to ensure correct way round).

Adhere Luxe Gold corners portrait inside the cabinet. Adhere the butterflies in the centres only with dries clear and add on dots specimen numbers (handwritten).

Adhere the flowers, leaves and butterflies to the fronts of the cabinet.

Other Products: DL card blank, paper trimmer/scissors, pearls, sisal, hot glue

Instructions: Card size is 8.3 x 3.7”. Cut a mat and layer of Kraft and Floral Butterfly Paper Collection edged in Deep Purple and adhere to the front of the card blank. Cut to fit inside Floral Butterfly Paper Collection edged in Deep Purple and adhere. Die-cut in kraft Royal Elegance frame and use Oval Basics to create a wider rim. Use Oval Basics again to create a photo frame insert in Luxe Gold Cardstock and adhere behind the kraft frame. Stamp in Deep Purple onto white cardstock ‘just a note to CHEER you’ and adhere behind the frame aperture. Die-cut in purple from Floral Butterfly Paper Collection the decorative Large Floral Butterfly and adhere the body of the butterfly in position with dries clear adhesive.

Stamp in Deep Purple onto Flower Shaping Paper Wild Asters and in Leaf Green the Wild Aster leaves and Leafy Accents. Colour the centres of the flowers with Vivid Chartreuse using the Stack and Store Daubers and the petals in Sky Blue, die-cut and edge in Deep Purple. Colour the leaves with Vivid Chartreuse and die-cut, edge with Fern Green and tips in Sepia. Spritz and run Leafy Accents through the die-cutting machine in the 3D Leafy Accents Mold and shape the Wild Aster Leaves with the Deluxe Flower Shaping Tool Kit. Spritz and shape the Wild Asters with the Groove Golf Tool set and adhere the petals together with hot glue. Cup the centres with the Deluxe Flower Shaping Tools add dries clear and prills and leave to dry.

Stamp in Sky Blue and Deep Purple ‘Thinking of you today’ on white cardstock, die-cut Rectangle Basics and edge in Deep Purple. Mat onto purple Floral Butterfly Paper Collection and adhere to the inside of the card.

With hot glue adhere the Wild Asters to the top and bottom of the frame. Use hot glue to adhere the leaves under the frame and adhere the frame over on dots. Use sisal under the wings and secure with hot glue to help lift the Floral Butterfly wings.

Finish with a little cheesecloth/voile and pearls.

Other Products: Heavy weight white cardstock, Copic Markers: RV10, V15, V12, V01, BVO1, BV13, YG03, YG25, YG17, B00, B01, B04, E50, E53, E33, E35, yellow cardstock,

Instructions: Card size: 4 1/4 x 6”. Make card base by placing the outer outline of the Royale Gateway die off the fold at the top of white heavy weight cardstock. Cut a new front using the same die from silver Luxe and from decorative paper. Glue the silver onto card front matching bottom and sides. Glue the decorative paper on top of the silver but slightly off-set leaving a silver edge on one side or the other.

Stamp the sentiment using Deep Purple on to the center of decorative paper panel about 1” from the bottom.

Die cut gate from silver and from white, off-set the white and glue onto the silver. Glue this set to the card front.

Stamp the small arch spray, the birdhouse and a set of birds using black, die cut and color. Stamp the Clematis (medium and small) using Deep Purple, sponge with the same, die cut and shape in the mold. Insert Dyed yellow Rock Candy Stamen or fringe a piece of yellow cardstock with scissors (both are done on this sample).

Pop the arch up on upper part of the gate, pop the birdhouse up on the right side of gate. Add small Clematis to some of the flowers and medium Clematis to the bottom of birdhouse post. Pop the birds up on and around the birdhouse. Glitter all the flowers and add Prills to the centers of the image flowers and center of the fringed stamen flowers.

Other Products: Cardstock- White, Water brush, Stampin Up Ink- Elegant Eggplant, Pearls, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Dual Tip Glue Pen, 3d Foam Squares)

Instructions: Cut a white cardstock card base that is 5 x 7” (10 x 7” folded). Die cut the largest of frame layers from green patterned paper, cut the other layers used all from white cardstock. Stamp the sentiment to the smallest layer using brown ink (Staz On- Timber Brown). Adhere these layers to the card base using a combination of regular adhesive and foam adhesive.

Stamp and die cut 2 of the small rounded sprays, 1 set of birds, and 1 birdhouse using brown ink onto white cardstock. Add color to the flowers using a water brush and purple ink (Stampin Up- Elegant Eggplant). Add color to the following using a water brush and Zig Clean Color Markers: Bird- Persian Blue, Orange; Birdhouse- Oatmeal, Mid Green; Sprays- Mid Green. Shape the pieces using the Deluxe Flower Shaping Kit. Add Prills to all of the flower middle using a liquid adhesive.

Adhere the sprays to either side of the card. Add the birdhouse to the right of the sentiment. Then add the single bird just below the sentiment.

Other Products: Diecutting machine, White Cardstock, Hot glue Gun, Misti, Watercolor Paper, Dimensional Dots,

Instructions: Card size is 4 x 6 1/4”. Create a 4 1/4 x 5” card base, place the outside Decorative Cage Die about 7/8” over the fold of the card and diecut. Using the same die, cut from white cardstock and adhere to the card front. Cut two pieces of the Climbing Clematis Paper Collection using the same die. Ink the edges of both using Deep Purple ink. Trim one to fit the inside of the card, stamp the sentiment ‘sending you a hug’ using Deep Purple ink and adhere, then adhere the other to the front of the card.

Using the decorative die, cut from white cardstock, sponge with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter. When dry, adhere to the card front.

Stamp the birds from the Clematis Birdhouse and Trellis Stamp Set on watercolor paper using Jet Black ink and color using Zig Clean Color Real Brush markers. Diecut and adhere to the cage using dimensional dots.

Stamp the Clematis flowers on Deluxe Flower Shaping Paper using Deep Purple ink, color with the same ink and diecut using coordinating die. Stamp the leaves from the same set on Deluxe Flower Shaping Paper using Olive ink, color using leaf green ink and diecut using coordinating die. Shape the flowers and leaves in the Clematis Shaping Mold. Cup the centers of the flowers using the stylus from the Deluxe Flower Shaping kit. Pierce the flower centers using the Groove Golf Tool set and add the Bridal Bouquet stamens. Secure the stamens with hot glue. Dab the tips of the stamens with Majestic Violet ink. Sponge the flowers and leaves using dries Clear Adhesive and sprinkle with Rajni Chawla’s Crystal Clear glitter.

Trim the stamen stems from the back of the flowers using a scissor. Adhere 6 flowers (3 Medium and three small) going up the left side of the cage. Add large and small leaves where needed.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, promarkers

Instructions: Cut a piece of white cardstock 8 1/4 x 11", score at 5.5" and fold to get a base. Cut a piece of blue paper with the birdhouse from Climbing Clematis Paper Collection to 5 1/4 x 8", adhere it inside of the base. Cut another piece of white cardstock 4 1/2 x 7 1/4” and blue paper with the birdhouse from Climbing Clematis Paper Collection to 4 1/4 x 7", adhere them inside base. Cut a piece of blue patterned paper from Climbing Clematis Paper Collection to 5 1/4 x 8", adhere to the base. In the middle of the first page cut out a circle with a Small eyelet circle die from the Decorative Circle Frames set. Cut a piece of white cardstock 4 1/2 x 7 1/4” and blue paper from Climbing Clematis Paper Collection to 4 1/4 x 7 ", adhere them together. In the middle of this piece cut out a circle with the Large eyelet circle die from the Decorative Circle Frames set. Adhere this piece to the base using adhesive foam. Cut out the white frame with the Decorative frame die and the Large eyelet circle die. Cut out two sentiments ‘Thank you’ using the Ironwork Sentiments Die, adhere them together. Adhere all elements as pictured.

Stamp blossoms from Clematis Cling Stamp Set in Forget-Me-Not ink onto Deluxe Flower Shaping paper, color them with Forget-Me-Not and Sky Blue inks and diecut with coordinating dies. For each big flower you`ll need 2 layers, for smallest flowers you`ll need 1 layer. Stamp 4 branches in Leaf Green ink and Leafy Accents Cling Stamp Set, color them, cut out with coordinating die and shape with the mold. You`ll also need about 8 branches from Cottage Tree 'scapes Cling Stamp Set and 4 leaves from Clematis Cling Stamp Set, stamp them in Leaf Green ink, diecut with coordinating dies. Use the Stack and Store daubers to color leaves with the same inks. Shape all Clematis flowers and leaves using their coordinating shaping mold. Thread the stamens through the centers of big clematis flowers and attach with hot glue, trimming off the excess string. For small flowers use just one stamen. Stamp 2 flower sprays with Clematis Spray Cling Stamp Set in Tuxedo Black ink. Color them with promarkers and cut out with coordinating dies. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and sentiment. Add some prills in the centers of stamped Clematis.