17+ elegant card, scrapbook and mixed media ideas for all occasions
Hey Friends,
How is your day going? How are you spending the last day of May.....are you taking time to create something beautiful today? How about getting started on some cheery cards that will quickly make you feel like you're in a creative oasis in a floral paradise:) If you feel stuck and want some ideas to get you started, you are in the perfect spot! Each Wednesday we bring you completely new inspiration that allows you to jump start your creativity and inspire you to create something beautiful!
High quality material, produce wonderful collections and products, ease of completing a project because everything is included to inspire me to be creative and you can also intermix with other HC collections. -Janet Anderson
Time is running out, take advantage now- You qualify for FREE Flower Stamens of your choice with a purchase. Apply coupon code 66031 during checkout. Valid May 13th -31st. *online only
Have a crafty day....sending you hugs! Emma Lou
Creative Inspiration of the Week
My Everything

Memento Dye Ink Pad - Lilac Posies, TSMP501
Ranger Archival Ink Pad - Plum, RACP499
Ranger Archival Ink Pad - Fern Green, RACP962
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
3D Floral Basics Shaping Mold, HCFB1-464
Fleur Border Basics Die, HCD1-7120
Eyelet Hearts Die, HCD1-7162
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Flowering Dogwood Die, HCD1-7129
Backyard Blossoms Die, HCD1-7181
Backyard Blossoms Cling Stamp Set, HCPC-3827
Large Sweet Peony Die, HCD1-7174
Large Sweet Peony Cling Stamp Set, HCPC-3820
Sweet Peony Paper Collection, HCDP1-288
Other Products:
Distress Ink Spray Victorian Velvet, Distress Grit Paste, TH Stencil, mixed media paper, pale green card stock (for stamens)
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
Instructions: Use dark pink designer paper from the Sweet Peony Paper Collection for a mat. Do a paint wash on mixed media paper with Distress Victorian Velvet spray paint, let dry and use Distress Grit Paste over a flourish stencil to create dimension and let dry. Cut a bit smaller than pink mat and cut bottom with the Fleur Border Basics and cut out the Fleur Border Basics, glue to under side. Cut floral paper from the same paper pad to fit mat and layer under flourished top. Distress all of the papers.
Cut out Eyelet Heart with eyelets in white and matching smaller heart in same dark pink as mat, cut out sentiment from paper pad and adhere to card.
Create flowers with the Large Sweet Peony stamps and dies and the 3D Floral Basics Mold, see video for instructions. Cut out stamens in pale green card stock with the large stamen die in the Flowering Dogwood Die. Sponge flowers with glue and cover with Crystal Clear Glitter.
Stamp and sponge leaves from the Classic Rose Vines and flowers from the Backyard Blossoms Cling Stamp Sets and cut out with corresponding dies. Arrange flowers and leaves and adhere to card.
Peonies for You

Memento Dye Ink Pad - Pistachio, TSMP706
ColorBox Fluid Chalk Ink Pad - Olive Pastel, 71012
Brilliance Ink - Pearlescent Crimson Copper, TSBL97
Brilliance Ink - Pearlescent Coral, TSBL32
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
3D Floral Basics Shaping Mold, HCFB1-464
Stack and Store Daubers-Pack of 30, HCDA2-450
Assorted Bead Stamens-Medium, HCS1-459-3
Festive Holiday Die, HCD1-7146
Small Sweet Peony Die, HCD1-7173
Large Sweet Peony Die, HCD1-7174
Peony Bud and Blossom Die, HCD1-7175
Sweet Peony Paper Collection, HCDP1-288
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Cling Stamp Set, HCPC-3820
Peony Bud and Blossom Cling Stamp Set, HCPC-3821
Other Products:
Bone folder, white card for stamping and die cutting, White Linen Card, Ranger Worn Lipstick Distress Oxide, Distress Forest Moss ink, Diamond Stickles, pink sheer ribbon.
To see how to shape the peonies watch these two videos: Sweet Peony Flower Shaping Basics and How to Shape the Sweet Peony 4 Different Ways.
Instructions: I like to do all my die cutting, shaping and coloring first. Die cut 2 of your Festive Holiday Decorative dies using white cardstock. TIP: when stamping with Pigment ink you will have to let it dry or set with a heat gun before die cutting and coloring to avoid smudging. Using your Large Sweet Peony Stamp Set and Small Peony Stamp Set, stamp your flowers using the Distress Oxide Worn Lipstick ink. Using the Small Sweet Peony Stamp set stamp the leaves using the Color Box Olive Pastel Ink. Using your Peony Bud and Blossom stamp set, stamp your buds using a mixture of the Olive Pastel on the leaves and the Worn Lipstick on the bud. When your stamped images have dried, use your stack and store daubers to color your flowers, I have colored the main flower using a mixture of Pearlescent Coral and Crimson Copper, the smaller outer flowers I used the Pearlescent Coral. The outer flowers I have used wired stamens 1 each in the outer flowers and 1 each in the small flowers in the top corner (see tip below for curling your stamen wires). Color your leaves with Memento Pistachio ink and highlight edges with Distress Ink Forest Moss. Once dried die cut with coordinating dies. Using your mini mister lightly spray your flowers, shape using the 3D Floral Basics Shaping Mold. Shape your peony bud using your Deluxe Flower Shaping Kit.
Cut your card base using the white linen cardstock 12" x 6 1/8". Fold your card in half, I like to run a bone folder over the spine of the card to give it a clean finish. Trim the selected cardstock from the Sweet Peony Collection, trim this down to 4 mats of 5 7/8" x 5 7/8". I like to use a full sheet of cardstock and have matching inserts and a rear mat. Lay your ribbon around you card base and leave equal amounts exposed to the right side to tie your bow. Hold in place with a little tape and adhere your front mat in place, this will hold your ribbon in place, repeat with the rear mat remembering to keep the card closed to avoid the ribbon bunching. Adhere your insert mats.
TIP: I like to use the metal stamen wire and curl them for added effect. I have done this on the outer flowers and the smaller flowers. I adhere my flower well in place and then using a skewer or a pen or a stylus handle (depending on the size of the curl required) I curl the wire around and skewer and slide off to give this beautiful curled wired effect. You can do this before you adhere your flower or when it is secured very well in place.
Now you have all your elements done, you can complete your card. Adhere the flowers and decorative die cuts as pictured. Using designer dries clear adhesive adhere the "Especially for you" sentiment, a little glue on the left and right sides, so you can hold the left in place and when secure push the sentiment up to have a raised effect for your heading and hold in place until dry, and you can loop the tail at the bottom of the blossom stamp through your sentiment. Decorate with Stickles as desired. I like to highlight the leaves and the Baby's Breath. Tie your bow to complete the card.
Love and Cherish

Designer Dries Clear Adhesive, 159723
Luggage and Tags Die, HCD1-745
Backyard Blossoms Paper Collection, HCDP1-290
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Die, HCD1-7181
Backyard Blossoms Cling Stamp Set, HCPC-3827
Other Products:
White card stock; VersaFine, Smokey Grey; Prismacolor pencils, Pale Sage, Apple Green, Grass Green, Rose, Blush Pink, Mulberry, Violet, Canary Yellow, Pale Vermillion, Spanish Orange, Tuscan Red; seam binding; lace; Tattered Angels glimmer mist, gold; foam tape; dollar store glitter dots; Wink of Stella, gold
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Cut card base from white card stock 5 1/2" x 8 1/2", fold in half. Cut the pink (or yellow) design paper 4" x 5 1/4", add to card base. Cut white card stock 3 3/4"x 5", add to card. Cut pink (or yellow) design paper 1 3/4" x 3 3/4", add to left side of card.
Cut a pink (or yellow) piece of design paper 2 5/8" x 4" to layer under tag. Cut 2 corners to match tag. Die cut tag and hole reinforcers, draw stitching lines with Micron pen. Stamp images with Smokey Grey and color with pencils. Add gold Wink of Stella to dots on grass. Add hole reinforcers and ribbon to tag. Add lace under pink (or yellow) tag liner. Add tag to liner with foam tape, then add entire piece to card with foam tape.
Die cut sentiment with Luggage and Tags die and add to card. Add glitter dots. Spritz with glimmer mist.
Framed Peonies

Stamp Mat Pad, D110305
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Double Dots 100pc. -3D Foam Circles, DDOTS
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Groove Golf Tool Set, DMCT4185
Molding Mat, STP1-420
Ranger Archival Ink Pad - Plum, RACP499
Ranger Archival Ink Pad - Rose Madder, RACP638
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Fern Green, RACP962
Heartfelt Expressions Cling Stamp Set, HCPC-3474
3D Rose Shaping Mold, HCFB1-462
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Butterfly Dreams Paper Collection, HCDP1-289
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Cling Stamp Set, HCPC-3820
Intricate Swirl Frames Die, HCD2-7191
Frame a Card Leafy Borders Die, HCD2-7190
Other Products:
White card stock 280 gsm, 180 gsm watercolor paper, mini stamens yellow, yellow bead stamens, oval die, clear water droplets
To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Begin by making the frame for the card front. Place the larger of the two frame a card borders without the outside cutting layer on a white card stock and cut a frame. Repeat this with coordinating the die on the opposite side to complete the frame. Take care to match the points so that you get one complete frame.
Cut a card base from white card stock using the frame as the guidelines for measurement. The card base should not measure more than the frame. Cut a subtle background pattern paper from any paper collection to the size of the card front. Adhere on the card front. Adhere the frame on the mat layer using clear glue.
Cut an oval die cut. Stamp the sentiment with black ink. Cut an inside die cut from intricate die set. Adhere the oval die cut in the centre of frame and place the intricate frame on it popping it up a little as shown.
Stamp several images of peony flowers with Rose madder and plum ink on water colour paper. Cut with coordinating die. Use the Rose madder ink to colour the flowers using sponge daubers. Mist a little with water and use the flower shaping mold to shape the flowers. Give more natural look to the flowers by using the groove golf tools medium and large size. Layer the petals and add pollens. Make small filler flowers from the classic rose die and stamp set. Make many leaves from the classic rose cling stamp and die using green inks. Shape the leaves using golf tools.
Arrange the flowers and leaves on the card front using glue. Finish the card by adding filler flowers and clear water droplets.
Encased Watercolors

Darice Adhesive Foam Strips, D120601
3-D Crystal Lacquer 4 oz, 3D1844
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Scor-Pal Measuring & Scoring Board, 173842
Heat It Craft Tool, RAHT
Nuvo Crystal Drops - Gloss White, NU651
Ranger Archival Ink Pad - Jet Black, RACP468
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Intricate Swirl Frames Die, HCD2-7191
Frame a Card Leafy Borders Die, HCD2-7190
Eyelet Rectangle & Basics Die, HCD2-7189
Blossoming Coneflower Die, HCD1-7180
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Fluttering Butterfly Die, HCD1-7178
Fluttering Butterfly Cling Stamp Set, HCPC-3824
Other Products: Picked Raspberry, Seedless Preserve, Peacock Feathers, Mowed Lawn, Wild Honey and Vintage Photo Distress Inks, Mini MISTI, VersaMark Ink, WOW Black Glitter Embossing Powder, x-acto knife, watercolor cardstock and pearls.
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Die cut a piece of white cardstock using Intricate Swirl Frames Die and Frame a Card Leafy Borders Die so that the corner doily die is flush with one of the inside corners of the frame die. Once the die is cut use an x-acto knife to cut the frame using the doily die cut and the stitched border as a guide. Die cut a white cardbase using Eyelet Rectangle & Basics Die and adhere the die cut frame on it using Darice Adhesive Foam Strips.
Stamp the butterfly image from Fluttering Butterfly Cling Stamp Set on a piece of watercolor cardstock using Mini MISTI, Picked Raspberry, Seedless Preserve and Peacock Feathers Distress Inks and spray it with water to spread the ink. Let it dry or use Heat It Craft Tool to speed up the drying. Stamp again using Jet Black Archival Ink and again with VersaMark ink. Heat emboss using WOW Black Glitter Embossing Powder and Heat It Craft Tool. Die cut this butterfly using matching die from Fluttering Butterfly Die. Adhere it to the card front as shown using Darice Adhesive Foam Strips. Add drops of Gloss White Nuvo Crystal Drops to the butterfly wings and cover its body with 3-D Crystal Lacquer.
Repeat the previous steps to stamp the coneflower image from Blossoming Coneflower Cling Stamp Set but use Mowed Lawn, Wild Honey and Vintage Photo Distress Inks this time. Die cut this image using matching die from Blossoming Coneflower Die. Adhere it to the card front as shown using Darice Adhesive Foam Strips. Add few pearls to add finishing touches to the card.
Thankful Purple Blossoms

12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Stack and Store Daubers-Pack of 30, HCDA2-450
Heart of Gold Prills, ANC804
Express-O Yourself Prills, ANC829
Memento Dye Ink Pad - Peanut Brittle, TSMP802
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Fern Green, RACP962
Butterfly Kisses Decorative Die, HCD1-7179
Blossoming Coneflower Die, HCD1-7180
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Garden's Edge Coneflower Die, HCD1-7182
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: Purple Cardstock
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
Instructions: Cut a piece of white cardstock 6" x 12", score at 6" along the long side and fold to create a 6" x 6" card base. Cut a 6" x 6" panel from the patterned paper and adhere to the front of the card
Die cut the frame from the HCD1-7179 Butterfly Kisses Decorative Die in white cardstock and adhere to the card. Die cut the lace decorative die and adhere to the centre of the frame. Die cut the circle out of white cardstock and adhere to the centre of the lace circle die. Die cut the Thank You out of the purple cardstock and adhere to the centre of the lace frame.
Stamp the coneflower image from the HCPC-3826 Blossoming Coneflower Stamp set in Fern Green, Majestic Violet and Sepia inks on white cardstock. Colour the flowers with the Majestic Violet ink, the leaves with Leaf Green and the heads with Peanut Brittle inks and die cut with the coordinating die. Shape the flowers and add Crystal Clear to the flowers and leaves with Dries Clear glue on a damp sponge and add Espress-O Yourself prills to the heads. Add around the curve on the paper as shown.
Stamp several coneflower images from the HCPC-3828 Garden's Edge Coneflower Stamp set in Fern Green, Majestic Violet, Rose Madder and Sepia inks on white cardstock. Colour the stem and leaves in Leaf Green ink, the purple flowers in Majestic Violet ink and the head with Peanut Brittle inks and die cut with the coordinating die. Shape the flowers and add Express-O Yourself Prills to the heads. Add Crystal Clear to the flowers and adhere around the bottom left as shown.
Stamp the leaf die from the HCPC-3828 Garden's Edge Coneflower Stamp set in Fern Green ink on white cardstock. Colour the image in with Leaf Green ink and die cut with the coordinating die. Add Heart of Gold Prills to the fronds and adhere around the coneflowers.
Beautifully Framed

Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Coffee, RACP451
Fluttering Butterfly Die, HCD1-7178
Fluttering Butterfly Cling Stamp Set, HCPC-3824
Intricate Swirl Frames Die, HCD2-7191
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: White, Black and Purple cardstock, Spectrum Markers EB, EB2, PL1, BT4, SMALL Foam Dots, Dreamweaver Embossing Paste, Dots Stencil, Ticket Punch
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.
Instructions: Prepare a White card base 5 1/4 x 7 1/4". Cut a piece of purple card stock 5 x 7" and layer on top.
Use the stencil and paste and add the dots in the center, let dry.
Use the Intricate Swirl Frame and cut it out with white card stock, place small foam dots on the back and adhere to card.
Locate the sentiment you wish to use, cut out, and punch the corners with the ticket punch. Mat on top of a piece of white and cut out use the ticket punch on those 4 corners.
Stamp the butterfly on white cardstock with the Coffee ink, cut out using the matching die. Use the spectrum markers and color. Use the butterfly die and cut 2 more out of black cardstock. Adhere all 3 together, add foam dots to the back and adhere to card.
Finish by adding glitter to the butterfly.
Coneflower Elegance

Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Die, HCD1-7181
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Backyard Blossoms Cling Stamp Set, HCPC-3827
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: White Cardstock, Homemade Glitter Glitz, (Made using beads, glitter and brown ink) Odorless Mineral Spirits, PC929, PC973, PC908, PC911, 738 1/2 Prismacolor Pencils,
For tips for creating with the Backyard Blossoms Collection with this video: https://youtu.be/swO34-n1HNc.
Instructions: My card size is 5 X 7". Make card base and cover with a piece of the paper collection. Die cut the Eyelet Frame out of white cardstock and glue it down.
Stamp the flowers with Rich Cocoa Memento Ink onto white cardstock. Color the images using the Prismacolor pencils listed above in the "Other Products" section and the odorless mineral spirits. Cut out the flowers with the coordinating die and then add the homemade Glitter Glitz to the flowers and set aside to dry. Using Designer Dries Clear Adhesive add the Crystal Clear here and there and then when dry, glue the flowers down behind the die cut frame. The card is finished.
Sparkling Blossoms

Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Leaf Green, RACP436
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Luggage and Tags Die, HCD1-745
Blossoming Coneflower Die, HCD1-7180
Backyard Blossoms Die, HCD1-7181
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Paper Collection, HCDP1-290
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Backyard Blossoms Cling Stamp Set, HCPC-3827
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Other Products:
Miniature train sands, Pearl pen yellow, Distress Ink Vintage photo, Glue gun, Big shot, Glue, Foam pads, staples, Purple cardstock, Purple glitter cardstock, Distresser, Purple Seam binding, Distress Ink Dusty Concord
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Cut a piece of Purple cardstock 10 x 7 inches, score it on 5" and fold it in half, then your card is 5 x 7 inches Cut a piece of the glitter cardstock at 4 3/4 x 6 3/4 inches and glue this on the front of the card. Take a piece of the design paper collection 4 1/2 x 6 1/2 inches, the one with the Purple Coneflowers on the left and cut next to the flowers leaving the bottom part straight, now take the distresser and distress all the sides and ink them with Vintage Photo, now only put some tape on the outside and glue the whole part down on the front of the card so then you have a pocket.
For the inside of the card you cut 2 pieces of the design paper 4 3/4 x 6 1/2 inches, distress all the edges and ink them with the vintage photo. For the left side you cut a tag out of the paper and mat it on a purple cardstock and cut it out so that you have a nice frame behind the tag, cut a strip from the design paper and glue this on the left side put tape on the tag only on 2 sides so that you create a pocket, now cut another tag out of the paper, mat it on cardstock take a piece of the seam binding and staple it on the tag, put this one in the pocket. For the right side you cut with a knife a slit into the paper, make 2 little holes with the Crop-o-dile and then cut a from hole to hole so then you have a nice slit and it won't tear! Now make 1 tag and mat it on purple cardstock and staple a piece of the seam binding on it and put it in the pocket (slit) then cut with the tag die a tag out of the paper and pull a piece of seam binding through it and put that in the slit too. For the front pocket you cut a nice big label out of the paper collection and a small one and bind them together on the top with a piece of seam binding and put that in the front pocket.
Coneflowers: Stamp some Cone flowers on white cardstock with the Rich Cocoa, cut them out with the coordinating dies and color them with the Lulu lavender, Dusty Concord and at the tips some Vibrant Fuchsia. Put some glue on the pollens and dip them in the (train) sand, let then dry. Also for the greenery, I colored them with a mix of Bamboo leaves and Leaf Green and on the tips some yellow dots with the Yellow pearlpen. Now you can make a nice arrangement on the front of your card, put some flowers on foam tape for dimension.
Unconditional Love

Embossing Powder - White, RPEJ685
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Deep Purple, RACP430
Assorted Pearl Stamens-Small, HCS1-459-1
Bright Bead Stamens-Medium, HCS1-458-3
Rock Candy Stamens-Small, HCS1-459-4
Butterfly Kisses Decorative Die, HCD1-7179
Flowering Dogwood Die, HCD1-7129
Deluxe Flower Shaping Kit, HCST1-401
Butterfly Kisses Cling Stamp Set, HCPC-3825
Heartfelt Expressions Cling Stamp Set, HCPC-3474
Rain Boots and Blossoms Die, HCD1-7169
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Flowering Dogwood Cling Stamp Set, HCPC-3773
Small Sweet Peony Die, HCD1-7173
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Cling Stamp Set, HCPC-3819
Other Products:
VersaMark, Mini micro pearl, Rainbow glitter, White cord, Vellum Paper, Cheese cloth, Heat Tool, Hot Glue Gun
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
Instructions: Ready project size 12"x12". Choose two pattern papers from Lush lilac paper collection. Take a thick chipboard and glue a pattern paper over it. Take another pattern paper little bit smaller than the first one. Make straight cuts over the pattern paper in 1" distance as shown. Distress the edges of all the cuts using scissors. Adhere the pattern paper using dimensional tape for added dimensions. Apply modelling paste using stencil. Take a piece of cardboard, apply gesso on the edges of the cardboard. Adhere the cardboard and the pieces of some pattern paper using dimensional tape as shown.
Take a square piece of chipboard (4.5") and make a frame. Glue the micro mini pearls on the frame using clear dry glue. Frame the picture. Cut a square frame using decorative die and glue it on the frame. Glue the frame on the layout using hot melted glue.
Stamp some sweet peony flowers on the white cardstock using deep purple archival ink pad and color with same color. Also stamp some Dogwood flowers using leaf green archival and color them with leaf green same color. Cut with coordinating die. Shape the flowers using deluxe flower shaping kit and add stamens. Stamp some leaves using library green and color with leaf green archival. Arrange the flowers and leaves in desired manner and adhere them using hot melted glue.
Stamp a sentiment using VersaMark on black chipboard and heat emboss with white embossing powder. Paste the sentiment chipboard using dimensional tape. Cut a doily from white cardstock using decorative die. Glue half doily die cut on the right side as shown in the picture. Stamp a butterfly on vellum paper using VersaMark and heat emboss with white embossing powder. Cut with coordinating die and glue on right side. Also cut a tag from the same collection and adhere it as shown. For the finished look apply rainbow glitter using adhesive that dries clear.
Favorite Florals

Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Kit, HCST1-401
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Pink Peony, RACP649
Ranger Archival Ink Pad - Buttercup, RACP632
Ranger Archival Ink Pad - Magenta Hue, RACP614
Pastel Bead Stamens-Medium, HCS1-457-3
Today's Quotes Cling Stamp Set, HCPC-3813
Classic Rose Vines Die, HCD1-7111
Classic Rose Vines Cling Stamp Set, HCPC-3753
Small Sweet Peony Die, HCD1-7173
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Cling Stamp Set, HCPC-3820
Art Foam Paper-10 Pack, HCFS1-465
Other Products:
Hot Glue Gun; white card
For more tips on creating with the Frame a Card Leafy Borders, watch the tutorial at https://youtu.be/K_1152Kd2Ls.
For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.
Instructions: Card base is 7.75 x 6". Cut a 7.75 x 12" cardstock in white, score at 6" and fold to create card base. And a pattern paper from the Butterfly Dreams collection. Adhere these two together. Die cut out the Eyelet frame die on white card and place this in the center of your card and decide where your sentiment from the Today's Quotes will go and stamp the sentiment with coffee archival Ink. Die cut another Eyelet Lace Frame from the same pattern you used for the background. Layer these on the card base by offsetting them centering the sentiment in center of the two frames.
Stamp on foam paper using Magenta Hue Archival ink two sets of large peony and four sets of the largest of the small peony. Die cut out. Color front and back with pink peony archival ink. Pierce center with paper piercer in kit and make a hole to make room for stamen.
Stamp on foam paper with fern green ink the medium peony leaf three times, color using Leaf green ink. Lightly heat these and add some crystal clear. Cut out a set of the smallest peony on white card and we will use these as fillers making sure to insert a stamen into each of these. I used four and colored them with the Buttercup ink. Stamp and cut one classic rose vine on white card using coffee archival ink and color with leaf green and fern green cut into three pieces as we are using only one piece.
Heat the foam paper from the front, not from the back and be careful to not over heat, the petals will curl inwards which is what we want it to do. Lightly shape these with the molding mat and stylus while it is still warm, careful to not press to hard on the foam paper or you will have an impression from the molding tool and we don't want that either.
Make two large peonies, using one large and one medium peony and create four small peonies using the small set. Use three - four stamens on the large set and two in each of the small flowers. I did use my glue gun to set these and adhere to the card base. Tuck in the peony leaf. Detail with crystal clear and complete assembly as shown in my sample.
Shaker Bells

Spellbinders Tool N' One, 359848
Ranger Archival Ink Pad - Jet Black, RACP468
Vellum Paper - 10 Sheets, 3-GN2911-F
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Nuvo Crystal Drops - Wisteria Purple, NU658
Nuvo Crystal Drops Gloss - Crushed Grape, NU662
Nuvo Crystal Drops - Dandelion Yellow, NU673
Sweetheart Borders Die, HCD1-7161
Eyelet Oval Die, HCD1-776
Classic Wedding Bells Die, HCD1-7143
Classic Wedding Bells Cling Stamp Set, HCPC-3789
Classic Wedding Roses Cling Stamp Set, HCPC-3788
Blushing Rose Paper Collection, HCDP1-271
Other Products:
Paper Trimmer, Die Cutting Machine, Sequins, Clear Seed Beads, An Acetate Sheet, Vellum, 3D Foam Tape, Double Sided Adhesive Tape, White Cardstock, Polychromos Pencils in the following colors: Light Chrome Yellow, Earth Green Yellowish, Chromium Green Opaque, Violet, Mauve, Cold Grey I, Cold Grey III, Cold Grey V, Cold Grey VI, Chrome Oxide Green
For more tips on creating with the Blushing Rose collection, watch the tutorial at https://youtu.be/HVQjbz25S2I.
Instructions: Cut out a base for a 5x7 inch card using White Cardstock. Cut out a 3x7 inch piece of vellum and die cut the left edge of the vellum paper with the long edge die from the Sweetheart Borders Craft Dies and adhere the remaining piece of vellum to the card so that that the decorative die cut edge is sticking out on the left side of the card. From the Blushing Rose Collection Paper Pad, cut out a 5x7 inch piece out of the 12x12inch yellow purple rose background pattern and adhere it to the front of the card base with double sided adhesive tape. Then, take the smaller yellow purple rose pattern from the paper pad and cut it out to a 4x6 inch piece and adhere it to the center of the card. Cut out a 4x6 inch piece of vellum and using Designer Dries Clear adhesive, adhere the edges of the vellum over the 4x6 inch piece of the centered paper. This completes the background of the card.
Start the front window of the shaker card by cutting out a 4 3/4 x 6 1/4 inch piece from the light purple text patterned background from the Blushing Rose paper pad and die cut an oval from the center using the solid Eyelet Oval Die. Cut a 4x6 inch piece of acetate and adhere it to the opening of the back of the window frame with double sided adhesive tape around the edges so that the window frame is sealed. Next, take the yellow patterned sheet from the Blushing Rose paper pad and using the Eyelet Oval Die, cut out an oval decorative border and adhere the border to the front of the window frame, lining it up with the oval window using Designer Dries Adhesive. Turn the window over to its backside and apply 3D foam tape around the edges of the oval window making sure there are no gaps or spaces between the tape. This is to ensure that the sequins and the seed beads don't escape once the card is completed. Apply Foam tape to the sides and corners of the window as well to prop the window up from the card base. Set aside.
Take the bells from the Classic Wedding Bells Cling set and stamp on white cardstock using Ranger Archival Ink in Jet Black and die cut using the coordinating dies. Color the stamped image using the polychromos pencil colors listed above and adhere 3D foam tape to the back. Adhere the stamped image to the center of the card base, ensuring that it is centered in alignment with the oval window and adhere.
Take sequins and place them around the stamped image along with the seed beads, ensuring that they stay in place around the stamped image, within the oval confine of where the window will sit. Take the window frame and place it over top of the stamped image making sure that it is centered and adhere. This process closes the shaker window.
From the Blushing Rose paper pad, cut out the decorative blank purple rectangle template and stamp with the "Best Wishes" stamp from the Classic Wedding Roses Cling Stamp set using Ranger Archival Ink in Jet Black. Use 3D foam tape for the back and adhere it to the front of the shaker window on the lower left side.
To embellish the card, use Designer Dries Adhesive to randomly attach sequins to the face of the card. Do the same using Nuvo Drops with the colors suggested above to match the colors to and decorate the remainder of the card frame and or background to your desire and allow to dry for 24 hours.
Rolling Hills

Hot Mama Prills, ANC821
Go Man Go Prills, ANC818
ColorBox Fluid Chalk Ink Pad - Dark Peony, 71032
Ranger Archival Ink Pad - Sepia, RACP505
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Sunflower, RACP005
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Plum, RACP499
Ranger Archival Ink Pad - Fern Green, RACP962
Rajni Chawla's Crystal Clear, PGM15015
Deluxe Flower Shaping Kit, HCST1-401
Fleur Border Basics Die, HCD1-7120
Tropical Parrots Die, HCD1-7138
Tropical Parrots Cling Stamp Set, HCPC-3784
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Die, HCD1-7181
Other Products:
White cardstock, Pencil colors, Clear dry glue, Foam tape, Double sided tape, Prills
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: The Finished card measures 9 -1/4 x 6-1/4" and consists of four layers. For the base of the card, cut white cardstock 12-1/2 x 9-1/4", score at 6-1/4" and fold. For the first layer cut pattern paper 9 x 6" from the collection and adhere on top of card base with clear dry glue.
For the second layer cut white cardstock 8-3/4 x 5-3/4" distress the edges with the help of a scissor and adhere on top of pattern paper with clear drying glue.
Next cut green color pattern paper from the collection 8-1/2 x 5-1/2", distress the edges and arrange on top of white cardstock with 3D Foam tape.
For the final fourth layer die cut two pieces of yellow color pattern paper from the collection using the largest and smallest die from Fleur Border Basics die set. Paste the die cut pattern paper on two opposite sides, leaving the green pattern paper visible from the center as shown with 3D foam tape.
Stamp white cardstock with Tropical Parrots stamp set using Archival Ink Black and cut with coordinating die. Color the image with pencil colors.
Next stamp four flower image form Backyard Blossoms stamp set on white cardstock with Archival ink Plum and library green. Color the image with Color box ink Dark Peony, Archival ink Olive and Fern Green.
Also stamp flower image from Garden's Edge Coneflower stamp set four times on white cardstock with Archival ink Sunflower and color with Archival Ink Sepia and Sunflower. Emboss the flower images from the back side with Deluxe Shaping kit and for a dimensional look layer one flower on top of another.
Stamp Fern and small flower images from the stamp set with Archival Ink Library Green and color with Archival ink Olive, Fern Green and Color Box ink Dark Peony.
Cut out a sentiment quote from the paper collection and mat with white cardstock. Once all the elements are ready arrange them as shown. Apply Crystal clear glitter on flowers and Prills on the ferns with clear drying glue.
Fluttering Sunflowers

Designer Dries Clear Adhesive, 159723
Tu Tu Pink Prills, ANC811
Heat It Craft Tool, RAHT
Embossing Powder - White, RPEJ685
ColorBox Pigment Ink Pad - Frost White, CB80
Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Fern Green, RACP962
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Butterfly Dreams Paper Collection, HCDP1-289
Eyelet Circle & Basics Small Die, HCD1-7154
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Classic Sunflower Die, HCD1-753
Classic Sunflower Cling Stamp Set, HCPC-3626
Lush Lilac Die, HCD1-7170
Lush Lilac Cling Stamp Set, HCPC-3816
Fluttering Butterfly Die, HCD1-7178
Other Products:
Papericious Vellum, Paperiocious Twinkling Spark, Paper distressing tool, Smooth white cardstock. Fossilized Amber Distress Oxide,, Fossilized Amber Distress ink, Fired Brick distress ink.
For more tips on creating with the Butterfly Dreams collection, watch the tutorial at https://youtu.be/uCKKJfAQFHA.
Instructions: The ready side fold card measures 7" by 7". Choose a 6' by 6' card panel from the Butterfly Dreams Paper Collection and cut the center round window using Eyelet Circle Basic Small Die Set. Also, distress the edges using a distressing tool or small scissors. Choose another pattern paper and create a window scene by layering the same with the help of glue dots. Further, create a green color mat and distress the edges and layer it using glue dots. Once happy with all layering, glue the card front to the ready card base.
Cut a white frame by nesting outer 2 dies of the Eyelet Circle and Basic Small die. Adhere it to the card window as shown. Cut a fancy frame from Butterfly Kisses Frame Die and cut all the corners apart. Adhere all the four corners as shown using glue that dries clear.
For Butterfly, white heat set three butterfly images on vellum using Frost White Ink and white embossing powder and cut 2 layers as shown. Color the butterflies using Fired Brick and Fossilized Amber distress inks. Shape the top 2 layers and glue all the layers together. Add some Swarovski for extra interest. Heat the ready butterfly with a heat gun and without wasting time sprinkle Twinkling Spark Glitter. Dust extras and heat set it again. It will make the glitter stick firmly to the details of the butterfly
Leaves: Leaves from Classic Rose stamp set are stamped using Library Green Archival ink and colored using Leaf Green and Olive Green Archival inks. These are then cut using the coordinating die and shaped using Deluxe flower shaping Kit. Glitter the leaves using Crystal Clear Powder and adhesive that dries clear.
For Lilacs, Images are stamped with VersaMark on vellum and heat set using white embossing powder. Cut the images with its coordinating die. Color the flowers using Raspberry Pink and Seedless Preserves. Shape the flowers using needle tool and add prills to the centers.
For Sunflower, stamp Classic Sunflower Stamp set with white Color Box ink and sprinkle white heat embossing powder. Dust extras and heat set with a heating tool. Paint the petals with Fossilized Amber Distress Oxide, let it settle it for a couple of minutes and then wipe off the extra ink with a napkin. Cut the petals using Classic Sunflower Die. Shape the petals by rolling each petal on a back of golf tool and glue the petals together using Aleene's fast grab glue to form a Sunflower. Prick the center and pass the rock candy stamens and set them tight with hot glue. Once all the elements are ready, assemble the card as shown. Add crystal clear, using an adhesive that dries clear, on all the edges for extra interest and complete the card by adding a sentiment from the pattern papers.
A Gift of Sunshine

Go Man Go Prills, ANC818
Express-O Yourself Prills, ANC829
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Deluxe Flower Shaping Kit, HCST1-401
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Luggage and Tags Die, HCD1-745
Gift Of Love Box Die, HCD1-7163
Window Box Elements Die, HCD1-7150
Sweetheart Borders Die, HCD1-7161
Sweet Peony Paper Collection, HCDP1-288
Garden's Edge Coneflower Cling Stamp Set, HCPC-3828
Garden's Edge Coneflower Die, HCD1-7182
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: Ribbon, Pearls, 3M foam tape, grass border punch, Copic Markers: RV55, RV63, RV17, G21, G82, Y11, Y15, Y17, E33, E97
For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.
Instructions: Box size: 2 1/2 x 2 1/2 x 4 1/2 " Die cut 4 box pieces from yellow decorative paper, fold on score lines and glue box pieces together (see video link above). Die cut inset pieces from a darker yellow decorative paper (x 4) for the top and bottom sections of box and also die cut top portion of inset using the flower decorative paper. Cut off 1/8" from all sides of the flowered paper die cut to fit inside the dark yellow and glue them together. Glue pieces to box sides. Die cut 2 Sweetheart Borders and 2 Window Elements borders from white. Glue Sweetheart border to bottom section of box and the Window Elements border to the very top of box. Die cut 2 tags for the top.
Stamp flowers (using Rich Cocoa ink), die cut and color with Copic Markers. Shape flowers and leaves slightly from the back using the deluxe flower shaping kit and add a mix of Prills to the cone center. Add Glitter to the petals. Glue flowers to each side of box. Punch the grass border from green decorative paper and glue it to the bottom (a 12" strip is more than enough to go all the way around the box). Add yellow (or white colored yellow) pearls to the top edge, close box and add bow with tags to (1) top panel (so that you can open and close box without removing bow).
Box is complete, just fill with candy or a special gift.
Cherished Blossoms

Deluxe Flower Shaping Kit, HCST1-401
Luggage and Tags Die, HCD1-745
Blossoming Coneflower Die, HCD1-7180
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: 7" x 7" white card base. White card. So Saffron cardstock, Old Olive ink (Stampin Up!). bakers twine. Black diamond stickles. Black glitter. Wet glue. Hot glue Ebony black crystal drops nuvo
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Cut a 6 3/4" piece of green paper from the pad and adhere to the card base leaving a thin white border.
Cut another lighter green paper from the pad 6" x 6" and ink around the edges in old olive, glue this onto a piece of saffron card slightly smaller than 6 1/2" square, and let the glue dry.
When the glue has dried die cut the corner coneflowers through the 2 layers of card and paper. Use old olive to ink around the die cut shape. Adhere these two layers to the base card.
Stamp the corner coneflowers and the blossoming coneflower onto white card and colour the petals and leaves (I used copics: Y35, YR04, YR16, YR23, YG99, YG63 and YG67). Add Stickles to the centre of each flower and sprinkle a small amount of black glitter to add a bit more sparkle.
When the stickles is dry, die cut the corner coneflowers and glue into the die cut aperture in the card.
Die cut and shape the blossoming coneflower then tie a baker's twine bow to the stem, add to the card using hot glue.
Die cut the cherish label and tie a baker's twine bow through the hole - shape the label and add to the card using hot glue.
Finish with a set of 3 nuvo drops in each corner.
Noted Blooms

Redland Elements 1 oz., 26redland
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Carnation Red, RACP399
Ranger Archival Ink Pad - Plum, RACP499
Ranger Archival Ink Pad - Sunflower, RACP005
Funnel Tray, 359503
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Deluxe Flower Shaping Kit, HCST1-401
Butterfly Kisses Decorative Die, HCD1-7179
Eyelet Circle & Basics Small Die, HCD1-7154
Blossoming Coneflower Die, HCD1-7180
Blossoming Coneflower Cling Stamp Set, HCPC-3826
Backyard Blossoms Paper Collection, HCDP1-290
Other Products: Scissor, Diecutting Machine
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
Instructions: Card final size 6"x6".
Now cut pattern paper and distress the edges and adhere to the card base.
Next cut one Eyelet circle die and cut one set of Butterfly kisses decorative die and adhere it behind the eyelet circle die with foam tape to give some dimension.
Now stamp 2 sets of Blossoming Coneflower with archival ink-plum and cut them with matching die. For main flower color the leaves with archival ink-leaf green and the flowers with archival ink-sunflower and red carnation. Shape them with deluxe flower shaping tool kit and then add Redland element and sprinkle crystal clear glitter. For border blossom coneflower randomly distress the edges with archival ink-red carnation and sprinkle crystal clear glitter and adhere them with foam tape on the left bottom and right top as shown.
Now add sentiment taken from the pattern paper and distress the edges and adhere with foam tape as shown.
Sea of Thanks

Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Classic Border Basics Die, HCD1-7119
Luggage and Tags Die, HCD1-745
Classic Rose Die, HCD1-7110
Classic Rose Cling Stamp Set, HCPC-3752
Tropical Hibiscus Die, HCD1-796
Under The Sea Die, HCD1-799
Under the Sea Cling Stamp Set, HCPC-3739
Under The Sea Paper Collection, HCDP1-266
Other Products:
Chameleon Colored Pencils, Distress Oxide Ink (Spiced Marmalade), Stampin' Up Ink (Early Espresso), Sequins, Beads, Stickles- Diamond, Scrapbook Adhesives by 3L (Adhesive Lines, Crafty Foam Tape, 3D Foam Squares, Dual Tip Glue Pen, E-Z Runner Ultra
For more tips on creating with the Under the Sea collection, watch the tutorial at https://youtu.be/84Re1-gaq1o.
Instructions: The card base is 6 x 6" kraft cardstock. Then cut the light blue patterned paper to 5.75 x 5.75". Using Adhesive Lines or Adhesive Dots adhere sequins all the way around the light blue patterned paper. Cut a piece of the light orange patterned paper that is 5.25 x 5.25" and adhere to the card using Crafty Foam Tape. Find and cut out the Under the Sea journal piece and adhere it in the middle of the card.
Using the decorative Classic Border Die cut a strip from kraft cardstock and then cut the length down to 5.25". Using the plain Classic Border Die cut a piece of the coral patterned paper and trim it down to a length of 5". Adhere the pieces together and adhere to the card using Crafty Foam Tape.
Stamp and die cut one set of the medium Classic Rose images onto white cardstock using dark brown ink (Early Espresso). Stamp and die cut 1 of the Classic Rose leaf images onto green patterned paper using dark brown ink. Stamp and die cut one fish onto white cardstock using dark brown ink. Add color to the flower images using ink and daubers. Shape and assemble the flower. Then using liquid adhesive add beads to the middle of the flower and let dry.
Add color to the fish using different shades of yellow and orange Chameleon Colored Pencils. I started with the darkest shades and simply did shading. Then worked my way lighter, layering the color. Finish with the lightest yellow. Add Stickles around the fins. Let dry.
Adhere the flower and leaves to the top left hand corner of the card. Die cut out the pre colored patterned images of a couple of shells. Find and die cut out the "Thank You" sentiment. Adhere the fish in the middle of the card and add sequins to look like bubbles above it. Add the sentiment using 3D Foam Squares. Add the shells.
Camilia in the Backyard

Ranger Archival Ink Pad - Fern Green, RACP962
Memento Dye Ink Pad - Tangelo, TSMP200
ColorBox Fluid Chalk Ink Pad - Lipstick Red, 71037
Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter, 532423-KIT
Scor-Pal Measuring & Scoring Board, 173842
Spellbinders Tool N' One, 359848
Funnel Tray, 359503
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Hydra Sponges, RLHS100
Assorted Bead Stamens-Medium, HCS1-459-3
Stack and Store Daubers-Pack of 30, HCDA2-450
3D Floral Basics Shaping Mold, HCFB1-464
Deluxe Flower Shaping Kit, HCST1-401
8.5 x 11 Cardstock Pack of 25 - White, HCPP2-451
Delightful Daisy Die, HCD1-760
Delightful Daisies Cling Stamp Set, HCPC-3656
Small Camelia Carnation Die, HCD1-7164
Large Camelia Carnation Die, HCD1-7165
Small Camelia Carnation Cling Stamp Set, HCPC-3806
Large Camelia Carnation Cling Stamp Set, HCPC-3807
Backyard Blossoms Paper Collection, HCDP1-290
Other Products:
Pearl White Metallic Card Stock, Ranger Archival Ink Watering Can, Ranger Distress Oxide Ink Vintage Photo, dimensional tape, Small dimensional dots, Water spritzer, Hot Gue Gun
For more tips on creating with the Backyard Blossoms collection, watch the tutorial at https://youtu.be/swO34-n1HNc.
For more tips on creating with the Camelia Carnation collection, watch the tutorial at https://youtu.be/rhk76SAIgWQ.
Instructions: Cut cardstock to 10" x 7", score on the long side at 5" and fold to create a 5" x 7" side fold card base. Cut two pieces of the darker green paper from the Backyard Blossoms collection 4 7/8" x 6 7/8" and ink the edges with Vintage Photo Ink. Cut a piece of the yellow paper from the collection 4 3/4" x 6 3/4" and ink the edges with Vintage Photo Ink. Adhere one piece of green and the yellow designer paper together using dries clear adhesive and then adhere to the card base using dimensional tape. Adhere the second piece of green paper to the inside of the card.
Diecut the Decorative Oval Die from Pearl White Metallic cardstock, sponge with dries clear adhesive and adhere to the card base using small dimension dots as shown. Cut the sentiment from the paper collection, ink the edges with Vintage Photo and back with an inked piece of the dark green paper from the collection. Lightly shape the sentiment and adhere to the card base using dries clear adhesive.
Stamp the large and small Camelia Carnations on white cardstock several times using Lipstick Red ink, diecut using the coordinating dies and color using Lipstick Red and Tangelo inks. Color the backs of each petal using Lipstick Red Ink. Place the petals in the Floral Shaping Mold, spritz with water and run through the die cutting machine. While still wet, continue shaping the petals with your fingers and the deluxe flower shaping kit. When dry, adhere the petals together using dries clear adhesive. Create one large carnation, one medium carnation and one small carnation. Also pierce holes in four of the smallest petals, stack and offset two petals to create two small flowers and add stamens to the centers.
Stamp the Delightful Daisy leaves on white cardstock using Watering Can Ink, color using Archival Fern Green ink, diecut using the coordinating die and shape using the Deluxe Flower Shaping Kit.
Sponge the flowers and leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal Clear. Adhere to the card as shown using a hot glue gun.
Swirling Art Foam

Rajni Chawla's Crystal Clear, PGM15015
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Garden Patina, RACP992
StazOn Ink Pad - Olive Green, TSSZ51
Rock Candy Stamens-Small, HCS1-459-4
Assorted Bead Stamens-Medium, HCS1-459-3
Art Foam Paper-10 Pack, HCFS1-465
Classic Rose Vines Die, HCD1-7111
Classic Rose Vines Cling Stamp Set, HCPC-3753
Deluxe Flower Shaping Kit, HCST1-401
Intricate Swirl Frames Die, HCD2-7191
Butterfly Dreams Paper Collection, HCDP1-289
Large Sweet Peony Die, HCD1-7174
Large Sweet Peony Cling Stamp Set, HCPC-3820
Other Products: 3D foam tape, hot glue gun, gallery soft oil pastels
For more tips on creating with the foam paper & stamens, watch the tutorial at https://youtu.be/Oma6ctVmUD0.
For more tips on creating with Sweet Peony Collection watch the tutorial at http://hcgo.co/SweetPeony.
Instructions: Create card base using white pearlised paper and Intricate Swirl Frames. Cut a piece of paper from the Butterfly Dreams Paper Collection using a Intricate Swirl Frames and adhere to the card base using Dries Clear Adhesive. Cut the Intricate Swirl Frames Die from paper collections and adhere to the card base using 3D foam tape for dimension.
Stamp the Large Sweet Peony Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Garden Patina and cut using the coordinating dies. Colour with Gallery soft oil pastels 224, 241. You will need 2-3 petals for each flower to create flowers.
Use an iron or heat gun to heat the petals and when start to shrink move them on the Molding Mat and press on the middle using shaping tool - using bigger one. Layer the petals together using the hot glue gun making sure to offset them or use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent Glitter and Rajni Chawla's Crystal Clear glitter.
Stamp the leaves using Classic Rose Vines Cling Stamp Set on the white paper with StazOn Ink Pad - Olive Green, cut out with the coordinating die, shade use this same ink and shape.
Adhere the flowers, leaves and add Assorted Bead Stamens-Medium to decorate, attach to the card using a hot glue gun.
Petunias for Mom

Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Kit, HCST1-401
Minnie Pearls Prills, ANC803
12 x 12 Cardstock Pack of 25 - White, HCPP3-452
Large Classic Petunia Die, HCD1-7140
Small Classic Petunia Die, HCD1-7139
Large Classic Petunia Cling Stamp Set, HCPC-3786
Small Classic Petunia Cling Stamp Set, HCPC-3785
Eyelet Oval Die, HCD1-776
Other Products: Distress Inks in Pickled Raspberry and Broken China, Archival Inks in Leaf Green and Watering Can grey, Kindy Glitz in Turquoise, Turquoise Paint
For more tips on creating with the Classic Petunia collection, watch the tutorial at https://youtu.be/KOy_qNB9OAk.
Instructions: Fold a 6.5" x 5" card and using the scalloped die from the "Eyelet Oval Die Set", place it just over the edge of the spine of the card and run it through your die cutting machine a couple of times. By placing it over the spine of the card, the spine will remain in tact and not get cut through. Then cut another piece of white card using the die with the little holes in it from the same set. Ink the edges of both pieces very softly with Broken China Distress Ink and then using foam tape, stick the eyelet oval onto the front of the card.
Now stamp and cut one set of flowers on white card using the Small Classic Petunia stamp and die set and two flower vines from the Large Classic Petunia stamp and die set using the Watering Can Grey ink.
Colour all these flowers and vines with Picked Raspberry, Broken China and the leaves with the Leaf Green ink. Lightly spritz the backs with water and use deluxe flower shaping tools to create flower shape. When all dry, for the two blue flowers layer up one of the larger petals with one of the smaller petals and for the pink flower layer up two of the smaller size petals.
Snip both vines into pieces and construct card front as shown. Dab a small amount of glue in all flower centres and sprinkle with a small amount of white Prills. Using your finger, dab a tiny bit of the turquoise Kindy Glitz onto all the blue petals.
Lastly either paint or heat emboss a card greeting stick it onto card front. I have used a Happy Mother's Day greeting but this card would suit a birthday, get well, thank you or most occasions for that matter.
Perfect Purple Poppies

Ranger Archival Ink Pad - Deep Purple, RACP430
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Majestic Violet, RACP494
Ranger Archival Ink Pad - Leaf Green, RACP436
Designer Dries Clear Adhesive, 159723
Groove Golf Tool Set, DMCT4185
Rock Candy Stamens-Small, HCS1-459-4
Stack and Store Daubers-Pack of 30, HCDA2-450
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Deluxe Flower Shaping Kit, HCST1-401
Petite Pocket Accents Die, HCD1-7212
Decorative Pocket Accents Die, HCD1-7211
Blazing Poppy Die, HCD1-764
Blazing Poppy Petals Cling Stamp Set, HCPC-3674
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Eyelet Rectangle & Basics Die, HCD2-7189
Other Products:
White cardstock, micro pearls, dimensional tape, cord, glitter
To see how to shape the poppy, watch the video at https://youtu.be/83jv-zjmdag.
Instructions: Ready top fold card measures 6.5" x 6.5". To create card mats, first choose a pattern paper from designer paper collection and cut a piece measuring 6.25" x 6.25". Distress the edges of the card mat using distressing tool. Adhere it on ready card base. Choose another paper from same collection and cut a piece measuring 6" x 6". Distress the edges and adhere it on card base as shown. Further, cut 2 more pieces of paper from designer paper measuring 3" x 6" and 2" x 6". Cut 2 pieces of decorative border from white cardstock using Petite Pocket Accents Die. Glue it on 3" wide strip. Adhere this strip on center of card using dimensional tape. Adhere another strip on it.
Cut a sentiment card from Heartfelt Love paper collection and mat it on pattern paper which is 1/8 of an inch bigger on all four sides. Cut an eyelet frame from white cardstock using Eyelet Rectangles & Basics die. Adhere sentiment card on it. Cut a decorative border from white cardstock using decorative pocket Accents Die and glue it on one corner of the sentiment card. Glue it on card using dimensional tape as shown.
Stamp blazing poppy flowers on flower making paper using deep purple archival and cut with coordinating die. Paint flowers using leaf green archival and majestic violet ink. Shape flowers using groove tool and add rock candy stamens. Stamp Leafy Accents stamp on flower making paper using olive green Archival and cut with coordinating die. Paint leaves with leaf green and olive green archival. Shape leaves using 3D shaping Mold. Arrange flowers and leaves and glue them using hot melted glue. Tie some bow using cord and glue them as shown. Apply clear drying glue and add micro pearls on card. For finished look, apply glitter on flowers using designer Dries Clear glue.
Graceful Petunia

Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Vibrant Fuchsia, RACP524
Ranger Archival Ink Pad - Pink Peony, RACP649
Bright Pearl Stamens-Small, HCS1-458-1
Deluxe Flower Shaping Kit, HCST1-401
Butterfly Kisses Decorative Die, HCD1-7179
Butterfly Kisses Cling Stamp Set, HCPC-3825
Eyelet Diamond Die, HCD1-7227
Diamonds & Lace Die, HCD1-7229
Petite Pocket Accents Die, HCD1-7212
Leafy Accents Cling Stamp Set, HCPC-3835
3D Leafy Accents Shaping Mold, HCFB1-467
Leafy Accents Die, HCD1-7193
Rain Boots and Blossoms Die, HCD1-7169
Rain Boots and Blossoms Cling Stamp Set, HCPC-3811
Eyelet Oval & Basics Large Die, HCD1-7157
Eyelet Oval & Basics Small Die, HCD1-7156
Classic Petunia Paper Collection, HCDP1-278
Large Classic Petunia Die, HCD1-7140
Small Classic Petunia Die, HCD1-7139
Large Classic Petunia Cling Stamp Set, HCPC-3786
Small Classic Petunia Cling Stamp Set, HCPC-3785
Other Products: White cardstock, pearls, VersaMark, Pink embossing powder, foam sheet (Fun Foam).
For more tips on creating with the Classic Petunia collection, watch the tutorial at https://youtu.be/KOy_qNB9OAk.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Card size: 6 x6 1/4". Cut white cardstock 12 x 61/4, fold in half to make a 6 x 6 1/4" card base. Cut the sides with the Petite Pocket Accents outer die. Cut decorative paper to match the card base. Cut 2 white narrow Petite Pocket Accents and 2 wide Petite Pocket Accents. Cut 1 white Lacy Diamond inside and out , 1 Eyelet Diamond, cut the inside Lacy diamond from a foam sheet to pop up the Eyelet and inside Lacy Diamond set. Cut the Eyelet Diamond from a foam sheet as well to pop up the lacy diamond. Glue the narrow Petite to the wide Petite in the back then glue the set to the cut side and do the same for the other side (narrow die will hang off edges). Glue the foam Eyelet Diamond to the back of the Lacy Diamond and glue it to the center of card base. Glue the other foam diamond to the back of the white cardstock Eyelet Diamond and then glue that set on top of the Lacy Diamond. Add pearls to the intersections on the Diamond at the top.
Stamp Sentiment using Vibrant Fuchsia then die cut using the Eyelet Oval and Basics then cut a mat. Rub the Vibrant Fuchsia ink pad along the edge of the sentiment oval to outline. Pop it up onto the diamond above the middle point.
Stamp the butterfly onto Vellum with VersaMark then heat emboss using Fuchsia embossing powder. Die cut and add a bit of color to the back. Stamp petunias using Vibrant Fuchsia then sponge with Pink Peony and Vibrant Fuchsia. Stamp the leaves using Leaf Green and sponge with Vivid Chartreuse. Form blossoms and Leaves in molds (smaller greenery is formed slightly with a shaping tool and foam mat). Glue 2 blossoms plus a green base for each flower. Pierce the centers and insert threaded yellow stamen.
Glue leaves to the right side of card and add flowers. Glue the butterfly (body only) to the left side of card. Add glitter to all the flowers.
Christmas Lavender and Lace

Silver Lining Prills, ANC806
Zig Clean Color Real Brush Markers - 36 Pack, 478455
Memento Dye Ink Pad - Rich Cocoa, TSMP800
Memento Dye Ink Pad - Bamboo Leaves, TSMP707
Memento Dye Ink Pad - Lulu Lavender, TSMP504
Ranger Archival Ink Pad - Garden Patina, RACP992
Ranger Archival Ink Pad - Jet Black, RACP468
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Regal Frame & Accents Die, HCD1-7248
Snowy Pine Village Die, HCD1-7195
Snowy Pine Village Cling Stamp Set, HCPC-3837
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Festive Holly & Cardinals Die, HCD1-7145
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products: White cardstock,
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Create a 4.5 x 6.5" card base. Cut out a piece of dark blue paper from the Candlelit Christmas Paper Collection, distress and adhere to the card base. Stamp the bough from the Snowy Pine Village and the snowy branch from the Window Box Fillers sets in black. Sponge all with inks listed and Zig markers, cut out with coordinating dies and lightly sculpt.
Stamp the poinsettias from the Christmas Poinsettia & Holly Cling Stamp Set in Lulu Lavender and sponge with same and Garden Patina, cut out with coordinating dies, sculpt with the 3D Christmas Poinsettia Shaping Mold. Add silver prills and glitter.
Stamp the lantern from the Festive Holly & Cardinals Cling Stamp Set in Jet Black and color with Zig markers, cut out with corresponding dies.
Cut out the Regal Frame & Accents Die in white cardstock with center die included. Stamp the sentiment from the Candlelit Poinsettia Cling Stamp Set on a piece of white card stock and adhere to the center of the card, adhere the Regal Frame on top. Arrange the bows, branches, poinsettias and lantern on the card as shown and adhere.
Friendly Peony

Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Jet Black, RACP468
Just For You Sentiments Cling Stamp Set, HCPC-3845
Album Tags and Accents Die, HCD1-7202
Small Sweet Peony Die, HCD1-7173
Large Sweet Peony Die, HCD1-7174
Small Sweet Peony Cling Stamp Set, HCPC-3819
Large Sweet Peony Cling Stamp Set, HCPC-3820
Other Products:
Versamark watermark stamp pad, gold embossing powder, glue dots, Distress oxide Victorian velvet.
For more tips on creating with the Sweet Peony collection, watch the tutorial at https://youtu.be/L9_MLkvpGPQ.
Instructions: The card base measures 6 " by 8". Take another piece of white cardstock and matte it on the card base. Cut an accent tag border from the Album tags and accents die set using a gold mirror cardstock. Stamp the flowers and leaves from the Small and Large Sweet Peony stamp set on white cardstock with versamark watermark stamp pad and heat emboss them in gold. Watercolor the flowers using distress oxide Victorian velvet and color the leaves using watercolors. Cut the flowers and leaves using the coordinating dies.
Paint vertical brush strokes on the card base using watercolors in grey shade and add some black watercolor splashes. Arrange the flowers on the card base and adhere them using glue dots. Trim the excess coming out of the card base. Stamp the sentiment from the Just For You sentiment stamp set using black archival ink on grey cardstock and adhere it on the card base. Adhere the gold frame on top of the sentiment. Lastly dust the flower images with crystal clear glitter powder.
Christmas in the Country

Lettuce Entertain You Prills, ANC814
Darice Adhesive Foam Strips, D120601
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Coffee, RACP451
Ranger Archival Ink Pad - Jet Black, RACP468
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
5"x 7" Foldout Cards-White, HCCF1-444-2
Stack and Store Daubers-Pack of 6, HCDA1-449
Butterfly Kisses Decorative Die, HCD1-7179
Elegant Border Basics Die, HCD1-7121
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Christmas Paper Collection, HCDP1-2104
Starry Night Decorative Die, HCD1-7252
Candlelit Poinsettia Die, HCD1-7250
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Glow of Christmas Die, HCD1-7251
Glow of Christmas Cling Stamp Set, HCPC-3883
Other Products:
White card, blue ink, hot glue gun, heat tool, white ink, embossing powder, coloured markers.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Take the fold out card and using pretty paper from the Candlelit Christmas Paper Collection, draw around each section with a pencil and cut out.
Using the Elegant Borders Basic Die cut out both borders in white card, twice. Starting with the front panel, glue two of the border panel dies, one to the front and one to the back of the card panel, making sure they line up. Now adhere the paper panels you cut out to the front and back. Stamp in coffee ink, three holly strips, colour in (I used markers) and die cut with the coordinating die. Adhere one across the back of the first panel. Cut out a sentiment, adhere to the back of the first panel.
For the second panel, adhere the cut-out pieces. Adhere holly strips to the front and back. Die cut one Butterfly Kisses Decorative Die Fancy Circle and small circle. Stamp in coffee ink the sentiment Merry Christmas onto the small circle. Adhere to the back of the second panel.
On the third panel, adhere the other two decorative borders from the Elegant Borders Basics Die, one to the front, one to the back, making sure they line up perfectly. Now adhere the cut-out panels. Die cut one Starry Night Decorative Half Circle Die. Adhere to the front of this panel. Cut out and mat a sentiment, adhere. Stamp with black ink the small Candlelit Poinsettia stamp, colour in, (I used markers), and die cut with the co ordinating die. Adhere to the left side of the panel.
On the back panel, adhere the cut-out piece.
Take some vellum and using white ink, stamp lots of Poinsettias. Add white embossing powder and dry with a heat gun. Colour in using the daubers and blue ink. Place in the coordinating Poinsettia Flower Shaping Mold, spritz with water, run through a die cutting machine, tap out and allow to dry.
Stamp in coffee ink lots of holly leaves, colour in with daubers and olive green ink. Die cut with the coordinating die. Place in the coordinating Poinsettia Flower Shaping Mold, spritz with water, run through a die cutting machine, tap out and allow to dry.
Make up the Poinsettias by adhering two of the same size petals together using hot glue, offsetting the petals as you go. Start adhering the Poinsettias and holly leaves with hot glue. Add glitter and prills using dries clear glue. Finish off by adding glitter to the holly strips.
A Time of Wonder

Rock N' Roll Prills - 12 Pack, ANC851
Heat It Craft Tool, RAHT
Groove Golf Tool Set, DMCT4185
Embossing Enamel - Aged Ivory, FREG030
Darice Adhesive Foam Strips, D120601
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Rajni Chawla's Vellum Flowerite - 10 Sheets, 18002
Stack and Store Daubers-Pack of 30, HCDA2-450
Circle Basics Large Die, HCD1-7155
Eyelet Circle & Basics Small Die, HCD1-7154
Candlelit Christmas Paper Collection, HCDP1-2104
Starry Night Decorative Die, HCD1-7252
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products:
Candied Apple and Mowed Lawn Distress inks, Salty Ocean Distress Oxide ink, Versamark ink, MS scoreboard, pearls and rhinestones, white cardstock.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Card size is 6 x 6". Cut a piece of 6" x 6" piece of pattern paper from Candlelit Christmas Paper Collection and adhere it to a same sized white card base.
Take a 6" x 6" piece of white cardstock and die cut it twice with Starry Night Decorative Die to make a doily. Use the circle die from Circle Basics Large Dies to die cut the center of this doily. Die cut a piece of pattern paper from same paper collection using the slightly larger circle die than we used in the previous step from Eyelet Circle and Basics Small Dies. Adhere it to the back of doily die cut. Trace the bigger circle from the doily die cut on another piece of pattern paper from the same collection and fussy cut it. Adhere this piece to the back of doily die cut as shown. Apply a little transparent holographic glitter to the snow in the pattern paper focal image. Adhere the final doily piece to the card front as shown using Darice Adhesive Foam Strips
Stamp the leaves and flowers from Christmas Poinsettia & Holly Cling Stamp Set several times on a sheet of Vellum using Versamark ink. Heat emboss them using Aged Ivory Embossing Enamel and Heat It Craft Tool. Color them with Mowed Lawn Distress ink and Salty Ocean Distress Oxide ink. Die cut them using matching dies from Christmas Poinsettia & Holly Die. Shape them using Groove Golf Tool Set and add a little I'm A-Maized Prills to the Poinsettia's center. Arrange and adhere them as shown on the card front. Add a few rhinestones and pearls to the die cut to add finishing touch.
Elegant Christmas

ColorBox Pigment Ink Pad - Frost White, CB80
Ranger Archival Ink Pad - Forget-Me-Not, RACP412
Ranger Archival Ink Pad - Red Geranium, RACP993
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Library Green, RACP475
Minnie Pearls Prills, ANC803
Rajni Chawla's Frosting Powder, PGM15016
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Vellum Paper - 10 Sheets, 3-GN2911-F
Regal Frame & Accents Die, HCD1-7248
Eyelet Rectangle & Basics Die, HCD2-7189
Candlelit Christmas Paper Collection, HCDP1-2104
Candlelit Poinsettia Die, HCD1-7250
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
ther Products:
Snipart Snowflake Frame, clear sparkles, Distress Oxide ink - Broken China, Green stamp paint
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Cut a piece of white cardstock 10" x 7", score at 5" along the long side and fold to create a base card of 5" x 7". Die cut a piece of white cardstock with the second largest plain edge die from the HCD2-7189 Eyelet Rectangle & Basics Die set and adhere to the card front. Cut a piece of blue patterned paper 4 3/4" x 6 3/4" and adhere to the card front. Die cut the outer decorative frame die from the HCD1-7248 Regal Frame Die & Accents Die set out of white cardstock and add Frosting Powder to frame with Dries Clear glue on a damp sponge and adhere to the front of the card. Die cut the lining out of blue patterned paper using the middle-sized plain edge die and adhere to the centre of the decorative die. Die cut the middle decorative die out of white cardstock and adhere over the blue patterned paper die. Stamp the Merry Christmas sentiment from the HCPC-3882 Candlelit Poinsettia Stamp Set in Forget-me-knot ink on white cardstock and die cut out using the inner plain edge die and adhere to the front of the decorative die. Add the chipboard frame over the Regal Frame.
Stamp the poinsettia images from the HCPC-3881 Christmas Poinsettia & Holly Cling Stamp Set in Frost White ink on the vellum and emboss with white embossing powder. Colour the back of the images with China Blue Distress Oxide ink and die cut with the coordinating die. Shape the petals and assemble using two layers per flower. Add Crystal Clear glitter with Dries Clear glue on a dry sponge. Add Minnie Pearl Prills to the centres of the flowers and adhere to the bottom left.
Stamp the holly images from the HCPC-3881 Christmas Poinsettia & Holly Cling Stamp Set with Library Green ink on Deluxe Flower Shaping paper. Colour with Red Geranium ink and Leaf Green and Olive inks and die cut with the coordinating die. Add green stamp paint with a damp sponge to the holly leaves and shape using the coordinating mold. Add Crystal Clear glitter with Dries Clear Glue on a damp sponge. Adhere around the flower as shown and add Red Berry Nuvo drops to the holly berries.
To finish, add clear sparkles to the decorative die and in the centre of the snowflake on the chipboard shape.
Golden Christmas

Eyelet Circle & Basics Small Die, HCD1-7154
Scor-Tool, 368771
Double Dots 100pc. -3D Foam Circles, DDOTS
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Ranger Archival Ink Pad - Vermillion, RACP461
Ranger Archival Ink Pad - Jet Black, RACP468
Color In Watercolor Brush - Fine, 409311
Zig Clean Color Real Brush Markers - 36 Pack, 478455
Stack and Store Daubers-Pack of 30, HCDA2-450
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Christmas Paper Collection, HCDP1-2104
Candlelit Poinsettia Die, HCD1-7250
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Starry Night Decorative Die, HCD1-7252
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products: Smooth White Cardstock, Glitter Balls, Score board and die cutting machine.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: The ready side-fold card from smooth white cardstock measures 8" by 5 1/4". Choose a paper from the paper collection to create the card front. Cut the designer paper 1/4" smaller on all sides than the ready card base and distress all the sides using sharp scissors or distressing tool.
To create the top panel, cut 2 starry night doilies in white cardstock and 1 in gold glittered cardstock. Stack the die cuts together using glue keeping the golden one on top. Layer the doily as shown and neatly cut the hanging edge so that these can be used on either of the corners as shown. Cut a circle from the designer paper collection and layer it on top of the Starry Night Doily.
Stamp the image from Candelit Poinsettia Cling Stamp Set with black archival on smooth white cardstock using black ink and color it using Zig Clean Clear Brush Markers. Die-cut the image using its coordinating die and add an extra die-cut to add little strength. Layer the image on the card front as shown.
Stamp a couple of Poinsettias using Christmas Poinsettia and Holly Cling Stamp Set using Geranium red archival ink and cut them using their coordinating dies. Color all the Poinsettias using Vermillion Red Archival Ink and shape them using its coordinating mold. Glue the petals to form beautiful Poinsettias and add golden glitter ball to the center using an adhesive that dries clear. Once all the elements are ready, assemble the card as shown, add a sentiment from the paper collection and glitter the flowers using crystal-clear powder.
Hanging Pink Poinsettia

Groove Golf Tool Set, DMCT4185
Opaque Embossing Powder - White, EP100
Nuvo Crystal Drops Gloss - Apple Green, NU669
Lettuce Entertain You Prills, ANC814
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Vellum Paper - 10 Sheets, 3-GN2911-F
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products: Clear photo bauble. Pink ribbon, Lovely Lipstick, granny apple green, mossy meadow ink pads - stampin Up!, Versamark, hot glue
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Click here to view a larger photo of this project. Make the poinsettia: Wipe over a sheet of vellum with an antistatic bag. Stamp 6 of each size of petal sets onto the vellum using versamark and cover in white embossing powder, remove excess and heat to set. Colour the back of the flowers with lovely lipstick ink, stroking from the centre outwards, then on the front lightly colour the edges. Die cut and shape using the golf tools. Glue the 3 sizes together to create the flower and add a drop of apple green crystal drops into the centre. Cover with prills, remove excess and set aside to dry.
Make the leaves: Stamp the largest set of petals onto the flower shaping paper using the mossy meadow ink and colour using the granny apple green. Die cut and edge the leaves with mossy meadow ink and colour the backs. Place face down into the mold and spritz lightly with water, put the lid on the mold and run through the die cutting machine. Remove the petals and allow to dry.
Attach a set of leaves to the back of each flower, place the first flower face down into the bauble and add the other 5 by adding a little hot glue to the leaves and shaping them into a circle.
Once they are all hot glued together sprinkle a little crystal clear glitter into the bauble so that it is free to move around the bauble and close and seal. Add a pink ribbon
Folded Blue Poinsettia

Designer Dries Clear Adhesive, 159723
Rajni Chawla's Crystal Clear, PGM15015
Fleur Border Basics Die, HCD1-7120
Deluxe Flower Shaping Paper Pack of 25 - White, HCPP1-468
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Christmas Paper Collection, HCDP1-2104
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
4 1/4" x 5 1/2" Foldout Cards-White, HCCF1-443-2
Other Products:
Distress Oxide-Faded Jeans, Distress Ink Ranger - Peeled paint
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
For more tips on creating with the border dies & foldout cards, watch the tutorial at https://youtu.be/wxX94X84kUo.
Instructions: Card size: 5.5" x4.25". Cut paper from the HCDP1-2104 Candlelit Christmas Paper Collection decorative paper to fit each panel, front and back using the method in Emma Lou's video above. Glue the paper on and then cut white borders using the Fleur Border for each foldout section.
To create flowers, stamp the poinsettias from Christmas Poinsettia & Holly stamp set on the paper Collection a few times using Distress Oxide-Faded Jeans, then die cut using the coordinating dies and shape using the Christmas Poinsettia 3D Shaping Mold. Layer the petals together using the hot glue gun making sure to offset them. Add glue to the centers and add go man go and ribbit prills. To create leaves, stamp the holly from Christmas Poinsettia & Holly stamp set on Deluxe Flower Shaping Paper using Distress Ink Ranger - Peeled paint and cut with the coordinating die. Shape leaves using 3D Christmas Poinsettia Mold. I cover the flowers and leaves with glue and cover them with Rajni Chawla's Crystal Clear. Glue flowers as shown.
Cut the sentiment "Warmest holiday wishes" from the paper collection, glue it on a slightly larger piece of paper and glue it to the card.
Joyous Post

ColorBox Fluid Chalk Ink Pad - Rose Coral, 71006
Ranger Archival Ink Pad - Red Geranium, RACP993
Ranger Archival Ink Pad - Vivid Chartreuse, RACP531
Ranger Archival Ink Pad - Leaf Green, RACP436
Go Man Go Prills, ANC818
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Pins Kit, PIN6
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Molding Mat, STP1-420
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 30, HCDA2-450
Circle Basics Large Die, HCD1-7155
Ornamental Tags Die, HCD1-7203
Starry Night Decorative Die, HCD1-7252
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Other Products: White cardstock; Red ribbon; Die cutting machine; Bow it All V3; Postage stamp scissors; corner rounder;
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Prepare a white card base 5 x 7". Cut a piece of the Candlelit Christmas paper 1/8" smaller. Cut another piece of white cardstock and place a lighter piece of the Candlelit Christmas paper on top rounding the corners of both pieces, adhere to card on the left side. Using postage stamp scissors, cut small squares and adhere the squares from the paper collection on top, add this to the rounded piece and adhere to card. Die cut the Starry Night Decorative border out of white and adhere to the bottom of the piece you just cut. Wrap a piece of the red ribbon around it then adhere to the card base. Cut out one of the Ornamental Tags from the paper colletion. Take the second to last circle die and cut out a white circle and put the 2 together.
Stamp the leaves on the Deluxe Flower Shaping paper using the Leaf Green ink, color in with the Vivid Chartreuse ink and cut out using the coordinating die. Stamp the flowers on the paper in the Red Geranium and color in with the Rose Coral, cut out with the matching die, and place all the flowers and leaves in the mold and run through the die cutting machine. Ink the edges of the leaves with the Leaf Green and the Flowers with the Red Geranium, put 2 of the same size flowers together making one flower, arrange on the card.
Make a bow and add to the card, place one leaf and one flower on top of the bow. To finish ,add glitter to all the leaves and flowers and Prills to the center of the flowers.
Starry Snowflakes

Double Dots 100pc. -3D Foam Circles, DDOTS
StazOn Stamp Cleaner, TSSZSC
5pc. Acrylic Block Set, SUAH05
Funnel Tray, 359503
Stamp Mat Pad, D110305
Heat It Craft Tool, RAHT
Rajni Chawla's Frosting Powder, PGM15016
Designer Dries White Adhesive, 159951
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Deluxe Flower Shaping Kit, HCST1-401
Album Tags and Accents Die, HCD1-7202
Bridal Bouquet Stamens-Small, HCS1-460
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Glow of Christmas Die, HCD1-7251
Glow of Christmas Cling Stamp Set, HCPC-3883
Starry Night Decorative Die, HCD1-7252
Other Products:
Die cutting machine, cheesecloth, thread, Steadtler watercolor pencil, Embossing powder WOW ! opaque bright white, Distress ink faded jeans, Glossy accent, Versamark watermark stamp pad
See how to shape flowers using the Deluxe Flower Shaping Kit here.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: The finished card measure 6 inches by 5 inches. Cut the card base in a white card stock to 10 inches by 6 inches and score at 5 inches on the longer side. Fold to make a vertical top folding card. Cut a 6 x 5 inche piece of blue pattern paper from Candlelit Christmas Collection and glue it to the card base. Die cut the decorative tag from the Album Tags and Accents Die from white cardstock. Diecut the inside plain edge from paper from the collection and adhere to decorative diecut. Diecut a frame using the two dies together from white cardstock and adhere to the decorative tag. Adhere decorative tag to card base using glue.
Use the Starry night decorative die and white cardstock to make 2 borders for the card base. Stamp your sentiment in the middle of your tag by using versamark and white embossing powder. (I chose Merry Christmas sentiment from the Candlelit Poinsettia and Holly stamps). Heat set with heat It Tool.
Stamp the Christmas poinsettia flowers and holly leaves with Distress ink Faded jeans ink on white card stock. Color the petals with the same color. Cut it with the coordinate die. Shape the flowers by using the 3D Shaping Mold and give further shape with Deluxe Flower Shaping Kit tools. Add stamens in the center of the flowers. Put a little bit of glue on the flowers and dip them in the glitter to make them shine. Stamp holly spray from the Glow of Christmas stamps. Color your leaves in green with markers or pencils. Cut with the appropriate die.
Finally, put cheesecloth and sewing thread down to your frame and glue your holly spray and flowers over it.
Making Spirits Bright

Ranger Archival Ink Pad - Jet Black, RACP468
Tombow Dual Brush Marker N00 Blender, 282873
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Bright Pearl Stamens-Medium, HCS1-458-2
Assorted Bead Stamens-Medium, HCS1-459-3
Stack and Store Daubers-Pack of 6, HCDA1-449
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Album Tags and Accents Die, HCD1-7202
Starry Night Decorative Die, HCD1-7252
Glow of Christmas Die, HCD1-7251
Glow of Christmas Cling Stamp Set, HCPC-3883
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products:
Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Liquid glue, soft brush, white gesso or Ranger Distress Paint - picket fence, Ranger Clear Gesso, White cardstock, Circle punch, Silver foil paper, Bone folder, 13arts Silver Glitter Acrylic Paint, Ranger Distress Ink pads - Chipped Sapphire, Barn Door, Mowed Lawn; Ranger Glitter Glue - Ice Stickles
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Card measures - 6 inches by 6 inches. To create 6" x 6" card base - cut a 6" x 12" piece of white cardstock and then score it at 6" (long side up). Fold using bone folder along the score lines. Cut a 6" x 12" piece from paper collection and score it at 4", 6" and 8" (long side up).
To decorate the interior of the card - cut a 6" x 12" piece from paper collection and score it at 4", 6" and 8" (long side up). Fold it as shown and adhere it to the centre of the card. Die cut two decorative strips of the Starry Night Decorative Die from silver foil paper. Cut out the 3" x 4" wishes from paper collection and adhere decorative strips and then 3" x 4" piece of white cardstock on the back. Punch two circles from white cardstock and fold them in half then adhere them to the card and then glue the decorative panel to them. Let the card dry off, then gently fold it and start decorating its front.
To decorate front of the card - cut out 6" x 6" piece from paper collection and adhere it to the card front. Die cut two pieces of the Starry Night Decorative Die in white cardstock distress it with Chipped Sapphire ink using douber and adhere them to the card front. Die cut silver piece from the Albums Tags and Accents, then using the same die set cut matching accent from paper collection. Adhere paper collection piece to the top of silver foil piece, stamp sentiment from Candlelit Poinsettia cling stamp set with Archival Jet Black Ink, wait till the ink dries off completely and then adhere it to the centre of the card front using 3D foam circles.
Stamp the few branch images from Glow of Christmas Cling Stamp Set with Jet Black Archival Ink and colour them in with Distress inks (Barn Door, Mowed Lawn) using Blender Marker. Die cut branch image with matching die from Glow of Christmas dies and adhere them to the card front. Stamp few poinsettia images from Christmas Poinsettia & Holly Cling Stamp set with Jet Black Archival Ink and colour them in with Barn Door Distress ink using dauber. Stamp few holly images from Christmas Poinsettia & Holly Cling Stamp set with Jet Black Archival Ink and colour them in with Distress inks (Barn Door, Mowed Lawn) using Blender Marker. Die cut poinsettias and holly images with matching die from Christmas Poinsettia & Holly, then place them in 3D Christmas Poinsettia Shaping Mold, spray them with water and run them through die cutting machine. Apply clear gesso to the poinsettias and holly leaves (make sure to wash your brush after using each colour) and leave them to dry off completely. Assemble poinsettia flowers using hot glue gun and adhere them to the card base. Fill in composition with holly leaves and red wire stamens.
For finishing touches, tap the gesso and silver glitter acrylic paint to the leaves and flowers using soft brush. Add Ice Stickles between flower stamens and add them to the lantern image. Leave the card to dry off completely.
Cheerful Flower Cart

Ranger Archival Ink Pad - Library Green, RACP475
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Red Geranium, RACP993
Lettuce Entertain You Prills, ANC814
Zig Clean Color Real Brush Markers - 36 Pack, 478455
Funnel Tray, 359503
Spellbinders Tool N' One, 359848
Scor-Pal Measuring & Scoring Board, 173842
Crystal Ultrafine Transparent Glitter 1/2 oz., 85-glitter
Designer Dries Clear Adhesive, 159723
Double Dots 100pc. -3D Foam Circles, DDOTS
Deluxe Flower Shaping Kit, HCST1-401
Stack and Store Daubers-Pack of 6, HCDA1-449
Cheerful Note Sentiments Cling Stamp Set, HCPC-3848
Sweet Shoppe Die, HCD1-7237
Sweet Shoppe Cling Stamp Set, HCPC-3873
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Other Products:
Diamond Stickles, SUP dazzling details, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping tool, Spectrum Noir Harmony inks- Ocean Blue, Bordeaux., Round foam-inking tool.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: This completed card measures 6" x 6" (15cm x 15cm). Taking the white card stock make a tent fold card measuring 6" x 6" / 15cm x 15cm. Using the Bordeaux ink and inking foam tool, ink the edges of the card base. Find the printed-paper used from the Candlelit Christmas paper collection. Trim the paper to 5.90" x 5.90" Adhere the paper to the card front.
To make the Poinsettia flowers and Holly leaves, stamp the Christmas Poinsettia and Holly leaves in the Library Green ink onto the white stamping card. Bring the color onto the images using the daubers and Archival inks Leaf Green and Red Geranium. When the coloring is finished, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed. Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centers then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card. 7 Flowers and 10 holly leaf sets are used for this card.
To make the flower cart: Taking the 'Sweet Shoppe' stamp and die sets, prepare the flower cart. Die cut extra for the cart from the white stamping card. When the cart is trimmed ready for use adhere the extra card cuts. Arrange and adhere to the card front. Adhere the flowers to the cart. Adhere the umbrella in place then add a few flowers and holly leaves to the top of the umbrella using the hot glue gun.
To make the sentiment: Taking the sentiment stamp, stamp the sentiment with the Library Green ink. Trim the excess card away and add color to the edges. Adhere the sentiment to the card. Apply to the card stickles and dazzling details to bring attention to the elements featured.
Hope and Peace

Ranger Archival Ink Pad - Carnation Red, RACP399
Memento Dye Ink Pad - Tuxedo Black, TSMP900
Heart of Gold Prills, ANC804
Rajni Chawla's Crystal Clear, PGM15015
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Merry and Bright Accents Die, HCD1-7196
Merry and Bright Accents Cling Stamp Set, HCPC-3838
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Christmas Paper Collection, HCDP1-2104
Starry Night Decorative Die, HCD1-7252
Christmas Poinsettia & Holly Die, HCD1-7249
Candlelit Poinsettia Die, HCD1-7250
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Other Products: Black cardstock, white cardstock, Copic: E50, E51, E21, E53, E33, B21, B32, G14, G85, YG67, YG61, Y11, Y15, Y38, R21, R24, R29
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.
Instructions: Card size: 6 x 6". Cut black card stock, one 6 x 6" and one 6 x 6 1/2" then score the 6 1/2" piece at 1/2". Glue black pieces together with the 1/2" tab to form the card base. Cut a piece of decorative paper 5 7/8 x 5 7/8" then glue it to the card base. Cut 4 Starry Night borders from Black then glue them to the outside edges of the card. Cut a full Starry Night "doily" out of black. Cut a piece of dark blue decorative paper the size of the inner circle of the Starry Night doily and glue it to the back of doily. Cut a larger circle out of green decorative paper (use the doily to get the cutting lines) then glue it to the back of the doily, now glue the paper pieced doily to the center of the card.
Stamp poinsettias, holly, candle holly border, sticks, and pine boughs using black. Color and die cut, poinsettias are sponged with Red Carnation ink, die cut and formed in the Shaping Mold. Glue 3-4 layers of poinsettia together and then add Prills to the centers. Cut a sentiment tag from the decorative paper.
Decorate card by starting with the poinsettia borders up each side along the green circle. Add Candle, pine boughs and sticks to arrangement. Glue 3 poinsettias and holly to the bottom left corner. Glue the sentiment partially under poinsettias. Add glitter to poinsettias and card.
Special Wishes

Rajni Chawla's Crystal Clear, PGM15015
Ranger Archival Ink Pad - Jet Black, RACP468
Noel Sentiments Cling Stamp Set, HCPC-3834
Pastel Bead Stamens-Medium, HCS1-457-3
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Glow of Christmas Die, HCD1-7251
Glow of Christmas Cling Stamp Set, HCPC-3883
Starry Night Decorative Die, HCD1-7252
Candlelit Christmas Paper Collection, HCDP1-2104
Other Products:
Glue, white and watercolor paper, Distress Inks Forest Moss and Tattered Rose, ColorBox ink Green, ColorBox Ink Red, double sided foam tape
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: You need a white card base 5 7/8" x 5 7/8". Choose the decorative paper from Candlelit Christmas Paper collection and cut to 5 6/8" x 5 6/8". Glue it on your card base.
Diecut two borders from Starry Night Decorative Die in white cardstock and glue it to your main background. (One piece at the top and one at the bottom). Diecut an oval from watercolor paper using Eyelet Oval Die and stamp a sentiment from Noel Sentiments Stamp Set using 3 different colors: Ranger Archival Ink Pad Jet Black, ColorBox Ink Red and Distress Ink Forest Moss. Glue on the right side of the card.
Stamp the ornament image from the Glow of Christmas Cling Stamp Set on a white cardstock, color it using inks like paints (put some color on an acrylic block and add some water). You need Distress Ink Forest Moss, Tattered rose, ColorBox ink Green ColorBox Ink Red. After coloring, diecut using matching Glow of Christmas die. Add to your main background using double sided foam tape.
Flowers: Stamp flowers from Christmas Poinsettia & Holly Cling Stamp Set on a piece of watercolor paper- using Color Box Ink red and Color Box ink green. Then color it using the same inks. Die cut using matching die from Christmas Poinsettia & Holly Die. Use Christmas Poinsettia 3D Shaping Mold for modeling your flowers. Glue it together using hot glue gun and hot glue and add stamens from Pastel Bead- Medium. Leave to dry. Add to your card and sprinkle with Rajni Chawla's Crystal Clear.
Glow of Christmas

Ranger Archival Ink Pad - Red Geranium, RACP993
Ranger Archival Ink Pad - Olive, RACP482
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Library Green, RACP475
Heart of Gold Prills, ANC804
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Vellum Paper - 10 Sheets, 3-GN2911-F
Paper Pack of 10 - Black, HCPP1-438-1
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products: Gold glitter cardstock, hot glue gun, led tea light candle, SVG file from here. Cricut Electronic cutting machine, gold fine cord, red organza ribbon, Green stamp paint, carmine red stamp paint
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Click here to view a larger photo of this project. Download the SVG file and cut on Cricut using black cardstock as a base and green patterned paper and gold glitter cardstock. Assemble according to the instructions given. Line the inside with vellum. Add red organza ribbon bow with a hot glue gun.
Stamp the holly images with Library Green ink on Deluxe Flower Shaping paper. Colour with Red Geranium ink and Leaf Green and Olive inks and die cut with the coordinating die. Add green stamp paint with a damp sponge to the holly leaves and shape using the coordinating mold. Add Crystal Clear glitter with Dries Clear Glue on a damp sponge. Adhere to the ornament with a hot glue gun. Add Red Berry Nuvo drops to the holly berries.
Stamp the poinsettia images in Red Geranium ink on Deluxe Flower Shaping Paper. Colour with Red Geranium and a touch of Leaf Green inks and die cut with the coordinating dies. Add Carmine Red stamp paint with a damp sponge and shape with the coordinating mold. Assemble and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Add Heart of Gold Prills to the centres and adhere to the ornament over the holly leaves with a hot glue gun.
Add a led tea light to the inside.
Oh Deer, It's Christmas

Starry Night Decorative Die, HCD1-7252
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products:
White cardstock, Brad
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: Start with a 6"x 10" piece of cardstock. Use the HCD1-7252 Starry Night Decorative die on one side of the paper. Fold the card in half. See video with full instruction here https://youtu.be/1aEa4tw_8gI.
Use the HCDP1-2104 Candlelit Christmas Paper Collection to cover the inside of the card.
Use the HCPC-3881 Poinsettia & Holly stamp, HCD1-7249 Poinsettia & Holly dies and the HCFB1-478 3D Poinsettia shaping mold to create beautiful flowers and add on the front of the card. Poinsettia Tutorial: https://youtu.be/g1ilhqwy37s.
Attach sentiment cut from the collection using a brad to make it spin.
Yuletide Glow

Indian Gold Nuvo Mousse, NU802
Zig Clean Color Real Brush Markers - 36 Pack, 478455
Ranger Archival Ink Pad - Jet Black, RACP468
Ranger Archival Ink Pad - Leaf Green, RACP436
Ranger Archival Ink Pad - Carnation Red, RACP399
Double Dots 100pc. -3D Foam Circles, DDOTS
Rajni Chawla's Crystal Clear, PGM15015
Designer Dries Clear Adhesive, 159723
Stack and Store Daubers-Pack of 30, HCDA2-450
Assorted Pearl Stamens-Medium, HCS1-459-2
Deluxe Flower Shaping Paper Pack of 50 - White, HCPP1-475
Regal Frame & Accents Die, HCD1-7248
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Candlelit Poinsettia Cling Stamp Set, HCPC-3882
Glow of Christmas Die, HCD1-7251
Glow of Christmas Cling Stamp Set, HCPC-3883
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products:
White cardstock, Big Shot Machine.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
For more tips on creating with the pocket accent dies, watch the tutorial at https://youtu.be/A8sxtkGXWLQ.
Instructions: Card size is 4 x 6." Cut shaped card from white cardstock using outside die from Regal Frame and Accents set. Cut pattern paper using same die and adhere it to the shaped card.
Cut the decorative dies from Regal Frame and Accents set from white cardstock and adhere on the card. Add crystal clear glitter and arrange these dies as pictured. Stamp sentiment from Candlelit Poinsettia Cling Stamp set using archival ink-jet black. Stamp the lantern from Glow of Christmas Cling Stamp set on white cardstock with Jet Black ink, color with zig markers and diecut with coordinating die.
Stamp some poinsettia flowers and leaves on white cardstock using carnation red and leaf green. Cut them with coordinating die, color them with same ink and add Indian Gold Nuvo Mouse. Shape them using 3D Christmas Poinsettia Shaping Mold and add stamens at the centre. Arrange the composition as shown.
Purr-fect Celebration

Ranger Archival Ink Pad - Jet Black, RACP468
Art Foam Paper-10 Pack, HCFS1-465
Pastel Bead Stamens-Medium, HCS1-457-3
Happy Camper Paper Collection, HCDP1-2103
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Elements of Home Die, HCD1-7244
Elements of Home Cling Stamp Set, HCPC-3880
Purr-fect Posies Die, HCD1-7238
Purr-fect Posies Cling Stamp Set, HCPC-3874
Purr-fect Posies Paper Collection, HCDP1-2102
Other Products: Twine, gauze, oil pastels, 3d squares, glue
For more tips on creating with the Purr-fect Posies collection, watch the tutorial at https://youtu.be/88KR6a5RRmg.
Instructions: From the Purr-fect Posies collection, cut 2 tags using Album Tags and Accents Die and glue them together. Add twine at the top.
Stamp Elements of Home images on different pieces of the Happy Camper collection using archival jet black ink and diecut using the coordinating dies. Arrange the composition on gauze and adhere to tag using 3d squares and glue.
Stamp the kitten image with balloons, twice, onto white cardstock using Jet Black ink and die cut. Color with watercolor paints, cut a balloon off the second image and layer it onto the main image using 3D foam. Adhere image onto center of tag using 3D foam. Stamp sentiment onto designer paper with Jet Black ink and die cut using tag from Album Tags and Accents. Wrap in twine and adhere, adding a bow.
To create flowers, stamp the Purr-fect Posies using Archival Ink Jet Black on Art Foam and cut with the coordinating dies. You will need 2 petals for each flower. Paint freely with oil pastels, rub the color with your fingers. Form with a hot iron. Make a hole in the middle and pull the stamens through. Add glue to each petal and bottom of the flower. Stamp the leaves on the foam and cut using the coordinating dies. Glue to the finished flower. Adhere the flowers as shown.
Peaceful Doily

Ranger Archival Ink Pad - Vermillion, RACP461
Metal Tip for Adhesive Bottles, 352854
Designer Dries Clear Adhesive, 159723
Starry Night Decorative Die, HCD1-7252
Candlelit Christmas Paper Collection, HCDP1-2104
3D Christmas Poinsettia Shaping Mold, HCFB1-478
Christmas Poinsettia & Holly Die, HCD1-7249
Christmas Poinsettia & Holly Cling Stamp Set, HCPC-3881
Other Products:
White Cardstock, Versamark Embossing Ink, Heat Tool, Paper Trimmer, Die Cutting Machine, Ranger embossing powder White, Pearls, brush, Distress Ink Twisted Citron, Hot Glue Gun, Nuvo Crystal Drops White, Glitter Dust, 3D Foam Tape, Pine Cone, Distresser Tool, Lace, Daubers.
For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.
Instructions: The ready top fold card measures, 6.3" by 9". Cut panel of white cardstock measuring 6" by 8.7" rough the edges with Distresser tool and adhere it on card using 3D foam tape, choose second panel from paper collection measuring 5.7" by 8.3" rough edges, adhere layer on first panel using dries clear adhesive.
For the Poinsettia Flowers and leaves, Stamp the images on white paper with VersaMark ink, cover with embossing powder and heat emboss with heat tool. Color it in the center in circular motion with Archival ink Vermillion using dauber. Color the leaves with distress twisted citron ink using dauber. Place the poinsettias and holly leaves face down in the 3D Christmas Poinsettia Shaping Mold, spritz with water and run through the diecutting machine to shape. Use the Deluxe Flower Shaping kit to finish shaping. Sponge the poinsettias and holly with dries clear adhesive and sprinkle with glitter dust. I used pearls as a center of my flowers using dries clear adhesive.
For the Doily I cut the Starry Night die from white card stock as well as from pattern paper for the sturdiness of doily and glued together. Place doily in the center of card base, add lace on the left side using hot glue gun and add flowers and pinecone with leaves.
Add sentiment from paper collection and add two flowers on the side corner of the sentiment as shown. To finish my card, I used White Nuvo drops on doily.