Other Products: Dimensional tape, white card stock, vellum paper, opaque white embossing powder, embossing ink, heat tool, distress oxide inks seedless preserves, peacock feathers and sunflower

Instructions: Cut off one panel from the 5 x 7” Gateway fold card. Using the outer edge die of the Teardrop flourish gateway die, cut three pieces of paper from the Delightful Daffoldil Paper Collection and adhere to the front and inside of the card. Add die cuts from the same frame in gold and white card stock and add to the card front. Cut a designer paper panel from the same die set cut from the inner plain die. Use the same inner die and the decorate window die and cut from white cardstock. Cut a small side panel made from gold cardstock using the eyelet frame die. Adhere the designer paper and decorative diecuts to the gold panel and adhere to the right side of the card front.

Stamp the daffodil spray images and hyacinths from the Delightful Daffodil & Hyacinth Cling Stamp Set and the Delightful Daffodil Spray Cling Stamp Set, colour with Zig markers, diecut and add to the card front. Adhere the curved spray to the top of the card base adhere the other spray and the hyacinths as pictured.

Cut happy birthday from white and gold paper using the Lattice Flourish Die and adhere together. Cut a gold circle and a smaller designer paper circle using the Circle Basics Large Die, adhere together and adhere to the card front as shown. Adhere the sentiment to the circle.

Stamp a butterfly from Delightful Daffodil & Butterfly Cling Stamp Set on vellum paper using embossing ink and embossing powder and heat set. Colour using distress oxide inks seedless preserves, peacock feathers and sunflower and add to the card.

Other Products: Smooth White Cardstock, Watercolour Paper, Dimensional Tape

Instructions: Ready tent fold card measures 6” × 8”. First, choose a mat from designer paper collection and cut a piece measuring 5.75” × 7.75”, distress edges with matching ink and adhere it on ready card base. Choose another mat from designer paper collection and cut a piece measuring 5” × 7” and adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card using dimensional tape.

Cut 2 decorative diecuts from white cardstock using Lattice Flourish Gateway die and arrange on card using dimensional tape as pictured. Cut a piece of white cardstock using Swirly Accent Spray Die and glue it on card.

Stamp Daffodil Spray image and butterfly images on watercolor paper using black archival and paint with zig markers. Also stamp some leaves from Cottage Tree ‘scapes stamp on watercolor paper. Cut images with coordinating dies and arrange on card using dimensional tape as pictured. Stamp sentiment from Elaborate Birthday stamp on designer paper using cactus flower ink and mat it on white cardstock. Arrange sentiment on card using dimensional tape. For finished look, apply Crystal Clear glitter using Art Glitter Dries Clear adhesive.

Other Products: Jelly plate or plain rubber/photopolymer stamp (can use the flat back of a photopolymer stamp) Paper trimmer, scissors, stamp platform (not essential), 6 x 6” card blank, hot glue/gun, 3D foam strip, anti-static bag, versafine onyx

Instructions: Stamp in Cactus Flower onto Deluxe Flower Shaping paper the Small Peony. Ink up Stack and Store Daubers and colour in Archival inks. Die-cut with coordinating die sets and run through the die-cut machine in Floral Basics Shaping Mold. Further shape with Deluxe flower Shaping Kit and with hot glue layer 2 or 3 petals of the same size offsetting the petals. Pierce the centre and poke through the stamens securing at the back with hot glue. Add Dries Clear to the centre of the single flowers and add I Cannot Tell a Lilac prills.

Stamp in Leaf Green the Leafy Accents, colour in Vivid Chartreuse and add Fern Green to the edges once cut. Run through the die-cutting machine in Leafy Accents Mold. Die-cut a tag from Wild Rose Paper Collection. With scissors or trimmer cut a 6 x 6” panel with a rounded square centre. Use Cut Mat Create 2A and die-cut the rounded square out. In the centre of the card blank adhere the rounded square. Die cut 4x mat in green from Wild Rose Paper Collection and plain white cardstock and adhere together, add over in pink from Wild Rose Paper Collection the Leafy Border decorative and ink the edges in Rose Madder. Secure the frame together using 3D foam strip ensuring to overlap the mitred corners. Adhere to the 6 x 6” panel (rounded corner aperture) any exposed 3D foam strip tap with anti-static bag to remove stickiness. Adhere the 6 x 6” panel on foam dots.

Use a Small Stamen as butterfly antenna and colour the cord with Cactus Flower.

Stamp out fluttering Butterfly in versafine onyx, colour with Zig Clean Real Brush Markers and die-cut, trim off the antenna and inside swirl on the bottom inside wing. To create the reverse wings, stamp onto flat rubber/photopolymer/jelly then take plain white cardstock to the jelly, hold in place and rub hands/fingers over to pick up the ink, die-cut and color to match. Shape wings with fingers and adhere together and antenna under with hot glue. Adhere the bottom left wings onto dots to secure whole butterfly to give a fluttering effect.

Adhere flowers, leaves and tag to the frame and add a decorative panel to the inside of the card blank.

Other Products: Watercolor Paper; Zig Clean Color Markers 90; Pink Ribbon; Bow it All; Die cut Machine; Black Color Box ink; Black Embossing powder; Heat Gun;

Instructions: Prepare a 6 x 6” white card base. Top it with a piece of the Delightful Daffodil paper (sheet 2B) slightly smaller. Cut one of the Stairway Gardens die out of white card stock and adhere pink ribbon around it, adhere to the card.

Cut one of the Ornate Ovals out of white card stock, add foam dots to the back and adhere to the card. Add White Crystal drops around the oval and in the loops of the Stairway Gardens die as shown.

Stamp the Delightful Daffodil on watercolor paper with the Color Box ink, heat emboss with the black embossing powder. Color with the markers, cut out with the coordinating die, add foam dots on the back and adhere to the card.

To finish make and add the pink bow.

Other Products: White Cardstock, Die Cut Machine, Dimensional Tape, Prismacolor Pencils: PC918, PC930, PC929, PC933, PC932, PC912, 742 1/2, PC917, PC931, PC911, PC908, PC916, 734 Gamsol, Blending Stumps

Instructions: My finished card size is 4 1/4" x 5 1/2". It is a split front card. Make card base and measure down 2" and cut and then the piece that is left cut at 1 1/2". I cut a piece of Sheet 7B of the paper collection and covered the inside of the card. I used Sheet 11B to cover the front of the card. I used a piece of tape to hold the bottom portion of the card front in place then I cut out the circle medallion and I used dimensional tape to adhere a piece of Sheet 12B of the paper collection that was also cut using the circle die. Add glue to the top and bottom of the circle medallion and glue down. I stamped the sentiment through the opening in the card front.

Using Rich Cocoa ink stamp the flowers and the fence. Color the flowers with the colored pencils and cut out using coordinating dies. Add glitter and set aside to dry. I colored the fence with Stack and Store Daubers and Toffee Crunch ink and cut it out using the coordinating die.

Once everything is dry, decide on placement and glue down the elements and the card is finished.

Other Products: Die cutting machine, white cardstock

Instructions: Cut white card base and fold with dimensions of 7 1/4" x 5 1/4". From the paper collection die cut a rectangle using Eyelet Rectangle & Basics Die HCD2-7189 with approximate dimensions of 7" x 5" and glue. From the white paper, cut 4 corners from the Swirly Accent Spray Die kit and glue them to the corners of the base. From the paper collection, cut the largest element from the Elaborate Oval Frames Die set and glue it in the center of the base. From the white paper, cut a smaller piece from the same set and glue.

With colored inks on paper from the collection, stamp the butterflies, cover the butterfly images with the same colors. Cut out the smaller elements of the butterfly from the white paper and glue it as shown.

Arrange everything as pictured. Finally, add sentiment, cover the butterflies with glue and glitter.

Other Products: Archival Ink- Shadow Grey, Cardstock- White, Stampin Up Ink- Yo Yo Yellow, Wate rbrush, Scrapbook Adhesives by 3L (3D Foam Squares, Crafty Foam Tape, Thin 3D Foam Squares)

Instructions: Using the plain Teardrop Lattice Gateway die cut your card base from white cardstock and the card front from blue patterned paper. Adhere the base together. Die cut the decorative Regal Lattice Gateway layers from white cardstock. Also die cut the small decorative piece from the Intricate Swirls Frame set from white cardstock. Stamp the sentiment onto that small piece using grey ink. Dust the edges using yellow ink (Yo Yo Yellow) and daubers. Adhere the large decorative piece directly to the background. Adhere then next layer using Thin 3D Foam Squares. Add the sentiment to the middle of the card using foam squares.

Stamp and die cut the daffodil sprays 3 times onto white cardstock using grey ink. On one set of the sprays, you will add color to everything. On the second set, color only the middle sections of the large flowers. On the third set add color to only the top sections of the daffodils, all using Zig Clean Color Markers and a water brush; Leaves- Olive Green, Daffodils- Yellow, Bright Yellow, Purple Flowers- Violet, Light Violet, Pink. Fussy cut out the flower bits from the 2nd and 3rd sets. Adhere these pieces to the fully colored sprays using Thin 3D Foam Squares between the layers for extra dimension.

Add the dimensional sprays to the top and bottom of the gateway card front using foam squares.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, gallery oil pastels 241, 224,

Instructions: For the card base use Gateway Fold Card – White. Cut front panel using outside die from the Scalloped Flourish Gateway Die from paper collection and place into card using Designer Dries Clear Adhesive. Cut using Elegant Swirl Gateway Die outside frame from paper collection and Luxe Gold Cardstock. Add gold frames under paper collection frame cut and adhere to the front of the shaped card using Darice Adhesive Foam Strips.

Stamp the Large Wild Rose Cling Stamp Set on foam paper with Ranger Archival Ink Pad - Paradise Teal and cut using the coordinating dies. Colour with Gallery soft oil pastels 224 and 241. You will need 2-3 petals for each to create flowers. Use an iron or heat gun to heat the petals and, when they start to shrink, move them on the Molding Mat and press on the middle using a large shaping tool. Layer the petals together using the hot glue gun making sure to offset them and use a paper piercer to make a hole in the middle and pull through the stamens. Add a little hot glue to the underside of the flower to adhere (watch tutorial). Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves using Large Wild Rose Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape leaves using Wild Rose Mold.

Stamp the Hyacinth using Delightful Daffodil & Hyacinth Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Garden Patina and Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp sentiment using Elegant Gateway Sentiments Cling Stamp Set on the piece of paper collection with Ranger Archival Ink Pad - Jet Black and place onto the card using adhesive foam strips. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, cheesecloth, Gutermann sewing thread, ribbon,

Instructions: The finished card measures 6 inches by 6 inches. Take a 6" x 6" Shutter Fold Card – White for your card base. Glue the two left panels together. Cut with the Rounded Eyelet window die. Repeat for the right part. Cut a 6 x 6 inch piece from the paper #10A and glue it inside the card.

From the Eyelet Circle and basics small die, cut a 3.5’’ circle in blue paper and a 3’’ circle in green. Glue on the top of each other and glue it on the middle of the left panel. From the inside glue another 3.5 blue circle to hide the back of the first.

Made 2 differents kind of flowers: 2 blue Dahlia buds, 4 yellow flowers from Wild Aster. For the blue I used archival ink French Ultramarine and for the yellow the archival Sunflower ink. Here’s the steps to make the flowers: Stamp using your ink onto flower shaping paper, colour the petals with the same color and diecut with the coordinating die. Place face down into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give further shape with Deluxe flower shaping kit tools. For the aster, poke a hole in the centre of the flowers and add stamens, secure with hot glue. For the buds, simply glue them together with hot glue gun. On the blue buds, put a little bit of glue on the flowers and dip them in the glitter to make them shine.

Stamp, cut and emboss leaves from the Leafy Accents collection. Color with leaf green archival ink. Glue on your 2 circles. Over the leaves, add cheesecloth and sewing thread. Add your flowers on top.

Stamp a sentiment on a white cardstock with leaf green ink, die cut with a little ticket. Ink the edge in green and glue it on your card.

To add the final touch, add lace ribbon through your bouquets.

Other Products: Copic pens B000, B00, B02, G40, YG01, YG03. Foam pads, 4 peach-coloured pearls, 6” square white card base, stamping card, hot glue

Instructions: Select and cut a peachy coloured paper to slightly smaller than the card base. Die cut the eyelet circle from the centre of this and adhere the remaining square to the card base.

Trim a 6 x 6” panel to 5.25” square and adhere to slightly larger piece of white card. Sponge dries clear glue onto the florals and sprinkle over with glitter. Use the 2nd largest circle die to create an eyelet frame and adhere around the florals. Add this section to the card base using foam pads.

Die cut the largest ornamental tag using the same paper as for the background and adhere to a white card die cut of the same shape. Diecut the sentiment and sentiment frame using white card and adhere to the tag.

Stamp the hyacinth using black memento ink (stamping the excess off first to give a paler impression). Colour using the alcohol markers, die cut and shape using the flower shaping tools.

Add the set of 3 hyacinths to one side of the card using hot glue and add the sentiment tag ontop using foam pads. Add the larger hyacinth over the top of the sentiment using hot glue and dries clear glue.

Adhere a pearl to each corner of the top panel.

Instructions: Cut a 5.5 x 5 inch card base from white cardstock. Cut a piece of plaid designer paper to fit card front with paper from the Delightful Daffodil Paper Collection, distress with Summer Sky and adhere to card front.

Cut out the Elegant Swirl Gateway Die mat in blue paper from the paper collection and adhere to adhesive backed foam, adhere to card front. Cut the inner die from the same set in white card stock and adhere to card front.

Cut a piece of yellow designer paper with the Eyelet Circle and Basics Small Die and stamp sentiment in black, adhere to adhesive backed foam.

Stamp the arched spray from the Delightful Daffodil Spray Cling Stamp Set two times in black and two times in pigment ink on vellum, heat emboss pigment ink in white, color the black inked images with Zig markers and cut out all with coordinating dies then adhere vellum sprays on top of colored images. Adhere sprays around sentiment.

Stamp the butterfly from the Delightful Daffodil & Butterfly Cling Stamp Set in black and color with Zig markers, cut out with coordinating die and fold wings. Adhere with foam tape as pictured.

Other Products: Smooth White Cardstock, Sequins, VersaMark Embossing Ink, Ranger Gold Tinsel Embossing Powder, Dimensional Tape, Paper Cutter, Nuvo drops, Finnabair Paints, Distress Ink Vintage Photo, Brush, water, Pebbles.

Instructions: Card size is 9”x 7” It’s a ready folding card. Cut panel on white cardstock measuring 8 3/4 x 5 3/4” and adhere it on the card base using dimensional tape. Trim Pattern Paper from paper collection measuring 8 3/8 by 5 3/8”, adhere it on white panel using clear glue. Cut White panel which is slightly smaller than pattern paper, sprinkle some ink vintage photo and paint using brush.

Stamp all images using versamark embossing ink cover it with embossing powder and heat emboss using heating tool. Die cut using coordinating dies. Add another layer underneath for the strength.

Color all images with paints and vintage photo ink using brush and water. Arrange all ready images as shown using dimensional tape. Stamp Sentiment ‘Happy Mother’s Day’ sentiment on pattern paper using Paradise Teal Ink, add this sentiment using dimensional tape. To finish your card, add sequins and nuvo dots using clear glue.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, sisal, promarkers, self-adhesive crystals

Instructions: Cut out a round base from white cardstock using Heart of Joy Decorative Die. Cut out one more white circle and one circle from Delightful Daffodil Paper Collection. Adhere all elements together. Cut out two decorated circles with Heart of Joy Decorative Die, one from white cardstock and one from a gold cardstock, adhere them to the base. Stamp the sentiment with Celebrate Love Sentiments Cling Stamp in Leaf Green ink and cut it out.

Stamp two branches with Delightful Daffodil Spray Cling Stamp Set in Tuxedo Black ink on Deluxe Flower Shaping Paper. Stamp 5 berries with Countryside Winter 'scapes Cling Stamp Set in Tuxedo Black ink on the Deluxe Flower Shaping Paper. Color them with promarkers and cut out with matching die.

Stamp 4 dahlias in Buttercup ink on the Deluxe Flower Shaping Paper, stamp 5 zinnias in Summer Sky ink and diecut with coordinating die. You`ll also need about 3 branches from Leafy Accents Cling Stamp Set. Stamp them in Leaf Green ink, diecut with coordinating dies. Use the Stack and Store daubers to color flowers and leaves. For the flowers use Buttercup and Summer Sky ink, for leaves use Leaf Green ink. Shape the dahlias and leaves using their coordinating shaping molds. Shape zinnias with Deluxe Flower Shaping stylus. Thread yellow, orange and white stamens through the centers of flowers and attach with hot glue, trimming off the excess string. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers.

Other Products: Altenew watercolors, Brustro watercolor cardstock, Brustro Green gold brushes, DMC corner rounder punch, double sided foam tape and silver rhinestones.

Instructions: Take a 4" x 5 1/4" piece of watercolor cardstock and paint some horizontal grey stripes. Round the left corners of this cardstock using the DMC corner rounder punch. Round the corner of a 4 1/4" x 5 1/2" white card base using the larger corner rounder side of same punch and adhere the watercolor panel on it using double sided foam tape.

Die cut a piece of black cardstock using the die from Sweetheart Borders Die and adhere it on the card front as shown. Trim away the hanging portion of the die cut. Die cut a piece of white cardstock and a piece of vellum using the dies from Heart of Joy Decorative Die. Layer and adhere them together. Adhere this piece on the black die cut as shown using double sided foam tape.

Ink the image from Delightful Daffodil & Hyacinth Cling Stamp Set with Jet Black Archival Ink and stamp it on a piece of scrap paper and then immediately stamp on a piece of watercolor cardstock to get a lighter 2nd generation stamping. Color in the image using Altenew watercolors. Die cut the image using the matching die from Delightful Daffodil & Hyacinth Die. Adhere this on the card front as shown using double sided foam tape. Make the Daffodil stamens using Apple Green Nuvo Crystal Drops Gloss. Adhere the rhinestones to add finishing touch.

Other Products: White cardstock, Iris cardstock, foam squares, pearls

Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7 1/2", score at 5” along the long side and fold to create a base card of 5” x 7 1/2". Cut a piece of blue pattern paper 4 7/8” x 7 3/4” and adhere to the front of the card.

Die cut two outer frames out of Deluxe Flower Shaping Paper using the #1 die from the HCD2-7338 Lattice Flourish Gateway Die set and adhere together. Die cut an outer frame out of patterned paper using the #1 die from the HCD2-7338 Lattice Flourish Gateway Die set and adhere to the front of the previously cut frame and then adhere to the front of the card.

Die cut two decorative frames using the #2, #3 and #4 dies from the HCD2-7338 Lattice Flourish Gateway Die set out of white cardstock. Adhere the outer frames together and then adhere to the front of the card. Add the lattice gate to card front using foam strips for more dimension.

Die cut three Happy Birthday sentiments – two from Deluxe Flower Shaping Paper and one from blue pattern paper from the HCD2-7338 Lattice Flourish Gateway Die set. Adhere together with the blue paper on the top and then adhere to the inside of the lattice gateway frame.

Stamp the hyacinth images from the HCPC-3944 Delightful Daffodil & Hyacinth Cling Stamp set in Jet Black ink on Iris cardstock. Colour in with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Clear glitter with Dries Clear glitter on a dry sponge. Adhere to the base of the card as shown with foam squares on a few of them to create some dimension.

Stamp the daffodil and hyacinth spray images from the HCPC-3945 Delightful Daffodil Spray Cling Stamp set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Add Crystal Clear glitter with Dries Clear glue on a dry sponge. Adhere to the top and bottom with foam squares.

Stamp the butterfly images from the HCPC-3943 Delightful Daffodil & Butterfly Cling Stamp set in Jet Black ink on Iris cardstock.Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Add Crystal Clear glitter using Dries Clear glue on a dry sponge and adhere to the card as shown with foam squares.

To finish, add pearls to the top of the gate as shown.

Other Products: Blue & Orange card stock; Die cut machine; Corner rounder; Black Color Box Ink; Black embossing powder; Heat gun; Watercolor Paper.

Instructions: Prepare a 5 x 7” white card base with a piece of blue card stock and a piece from sheet (12B) of the Delightful Daffodil paper on top slightly smaller.

Cut one of the Ornate Pocket Accents out of white card stock and adhere to the right side of the card. Cut a piece of Orange card stock 3 1/2 x 4 1/4”, round 2 of the corners; lay a piece of white card stock on top with the same 2 corners rounded. Place foam dots on the back of the orange and adhere to the left side of the card as shown.

Stamp the 4 Daffodils, 3 of the (HCPC-3944) and one of the (HCPC-3943) on water color paper with black color box and add black embossing powder, heat, color with Zig markers, die cut with the coordinating dies, place foam dots to the back of the largest one and adhere to the card. Place tiny foam dots on the 2nd one and adhere on top of that one. Fussy cut the center of the 3rd one, add tiny foam dots and adhere to the top of that Daffodil as shown. Add foam dots to the last Daffodil and adhere to the card.

Stamp the leaves with Bamboo Leaves, color with New Sprout, cut out with coordinating die, ink the edges with ore of the Bamboo Leaves ink, shape with the Flower Shaping tool and adhere to the card at the bottom.

Stamp the Hyacinths on Watercolor paper with the Black Color Box, color with the Zig markers, cut out with the coordinating die, shape using the Flower Shaping tool and adhere to the bottom of the card.

Locate the blank tag form sheet 9A, stamp the sentiment with Black ink, cut out, add foam dot to the center and adhere to the bottom of the card.

Add glitter to the flowers and leaves to finish.

Other Products: White cardstock, Big-Shot Machine.

Instructions: Card size 6” x 6”. Take pattern paper from the collection HCDP1-2124 Delightful Daffodil Paper Collection, distress the edges and adhere it on card base using Designer Dries Clear Adhesive.

Cut two dies from HCD2-7337 Teardrop Lattice Gateway Die on gold cardstock, adhere them using Designer Dries Clear Adhesive, as shown.

Stamp daffodil spray images from HCPC-3945 Delightful Daffodil Spray Cling Stamp Set on white cardstock using archival ink-jet black, cut them with coordinating die and color them using Zig Clean Color Real Brush Markers. Adhere them using foam tape.

Cut one die from HCD2-7309 Elaborate Oval Frames Die on white cardstock, add sentiment from HCPC-3844 For My Friend Sentiments Cling Stamp using archival ink-library green and adhere it using foam tape, as pictured.

Other Products: Die Cutting machine, Trimmer or Guillotine, Score board, Scissors, Bone folder, Memento Dye Ink Pad - Dandelion, Satine white ribbon

Instructions: Top fold card measures - 5 inches by 7 inches. To create a card base - cut out a 10 1/2 x 7 1/4” piece of HCPP1-438-2 White Card and score it at 5 1/4” (long side up). Fold using a bone folder along the score lines, then die cut the shape base of it using larger HCD2-7306 Decorative Circle Frames Die. Using the same larger die from the HCD2-7306 Decorative Circle Frames Die cut a piece of HCDP1-2124 Delightful Daffodil Paper Collection and adhere it to the card front.

Die cut decorative frame from HCDP1-2124 Delightful Daffodil Paper Collection using HCD2-7306 Decorative Circle Frames Die, then distress it with Memento Dye Ink Pads - Bamboo Leaves and Olive Grove using HCDA1-449 daubers and adhere it on the center of the card front.

Die cut decorative circle from HCDP1-2124 Delightful Daffodil Paper Collection using HCD1-7283 Courtyard Elegance Die, then adhere it to the card front as shown.

Stamp the sentiment from HCPC-3847 Celebrate Love Sentiments Cling Stamp Set with Memento Dye Ink Pads - Olive Grove, then die cut it using HCD1-7283 Courtyard Elegance Die and adhere the final piece to the card front.

Stamp the daffodil spray images from HCPC-3945 Delightful Daffodil Spray Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leaves, Dandelion and Paris Dusk using 282873 Tombow Dual Brush Marker N00 Blender and HCDA1-449 daubers. Die cut the images with matching HCD1-7343 Delightful Daffodil Spray Die and adhere them on the top and bottom of the card front using DDOTS 3D foam.

As a final touch, apply 3-D Crystal Lacquer 4 oz 3D1844 and glitter on selected leaves and flowers and leave it to dry completely.

Other Products: White cardstock, Fun Foam, gold ribbon, embossing ink, Copic Markers: Y11, Y15, Y19, Y35, YG61, YG 63

Instructions: Card size: 5 5/8 x 6 3/4". (See video for cutting shaped cards.) Cut white cardstock 7 x 11” then fold in half. Place outer die of Elaborate Oval Frames so that top of die hangs off fold about 1/2". Cut another outer die out of Luxe Gold then glue it to white folded card base. Cut the large decorative part of die out of white and out of foam sheet. Stack and glue then glue to the gold. Cut Album Tag and Accents out of white also out of foam sheet, mat out of gold. Stamp sentiment onto white layer, emboss with gold. Glue tags together with mat and foam then glue them to the card center.

Cut 2 Sweetheart wide Borders out of white. Glue one to the front and one to the back for a stand so that card sits straight while on display.

Stamp large daffodil using black, die cut then color with Copics or favorite coloring method. Glue the daffodil to bottom and right side of the Elaborate Oval Frames.

Glue a gold metallic bow to the bottom of daffodil stem. Glitter flower and white parts of the card.

Other Products: Foam tape, alcohol markers, nida tanweer magic glitter, black cardstock, gold embossing powder, versamark stamp pad.

Instructions: Create a card of size 5 by 7” using black cardstock.

Stamp the images from the Delightful Daffodils and Butterfly, Delightful Daffodils and Hyacinth, Delightful Daffodils Spray cling stamp set on black cardstock with versamark stamp and heat emboss in gold. Cut the images using their coordinating dies. Cut the decorative piece of the butterfly from the Delightful Daffodils and Butterfly die set using luxe gold cardstock and layer it on top of the stamped butterfly image. Arrange and adhere the embossed images on card as shown.

Lastly, stamp a sentiment from the just for you sentiments stamp set and heat emboss in gold.

Other Products: Inks: Spectrum Noir: Harmony Ink Grasshopper. Spectrum Aqua blend pencils: Daffodil: Primrose, Wheat, Sunshine, Strawberry. Leaves: Pesto Green, Oregano. Hyacinths: Pesto Green, Coral. Flowers: Strawberry. Butterfly: Asphalt, Sunshine, Bison, Umber; Diamond stickles, Double sided tape, Double sided 3D foam tape, Inking Tool.

Instructions: This card when finished and folded flat measures 8” x 6 1/8”. Using a sheet of white card stock cut to 12” x 6 1/8”. At one end make folds at 2” and 4” flip to the other end and do the same. Fold the score lines to hill and valley folds. Taking the sheet found in the paper collection with the checks printed and cut mattings for each panel. Cutting these just a little smaller than the card base. Adhere to the card base. Taking the white card stock make a bridge for the card front, cut this to 2” x 8” mat this also the same as the card front. Adhere across the card front at both the 2 “ panels so when folded to one side it will sit flat. Taking the same paper design, cut the diamond frame using the die in the Lacy Diamond frame set. Make folds each end of this diamond frame, you will need 4” for the card bridge and the rest for the folds. Adhere the folds to the sides of the card to form a bridge.

Make the embellishments by stamping, die cutting and colouring the following: 2x Hyacinth clusters, 3x large single Hyacinths, 2x Butterflies and butterfly extra wings from vellum, 2x Daffodil with buds, 1x single Daffodil, 3x Flower clusters.

Color the elements by using the water color pencils listed in the product list and trim as needed when adhering to the card front. Flower clusters across the card bridge and two butterflies. Daffodils adhered to the diamond frame, the Hyacinths adhered above the bridge on the panels each side of the card front.

The sentiment is stamped on a strip of card stock trimmed to at least 5” . You will need 4” for the width of the card front, the rest is folded at each end and then adhered to the sides the same as the diamond frame. To finish the card, apply the diamond stickles to the Daffodils and butterflies.

Other Products: Champagne Metallic Cardstock, Watercolor Paper, VersaMark, Foam Square Dimensionals, Sheer Shimmer Spray Sparkle, Diecutting machine

Instructions: Card size is 5 x 8”. Cut the outside die from the Lattice Flourish Gateway Die two times from champagne metallic cardstock. Adhere 1” double sided tape to the second one before diecutting. Score the second diecut right under the tape and adhere the two panels together. Cut Luxe Gold Cardstock using the same die and adhere to the card front. Cut the decorative dies from the Lattice Flourish Gateway Die set and adhere to the gold cardstock as shown using dries clear adhesive.

Using the second largest eyelet die from Eyelet Frame Gateway Die, cut from Luxe Gold Cardstock. Using the second largest plain die from the same set, cut from champagne cardstock, stamp ‘Hope your day is as special as you are’ using VersaMark ink, sprinkle with gold embossing powder and heat set using Heat It tool. Adhere these two panels together and then adhere to inside of card.

Stamp the spray from the Delightful Daffodil Spray Cling Stamp Set and the butterfly from the Delightful Daffodil & Butterfly Cling Stamp Set on watercolor paper using VersaMark, sprinkle with gold embossing powder and heat set using Heat It tool. Color with Zig Clean Color Real Brush markers and diecut using coordinating die. Diecut a second time and adhere the layers together. Spritz with Sheer Shimmer Spray-Sparkle, shape using the Deluxe Flower Shaping Kit and adhere to the card front as shown using dimensional squares.

Cut the butterfly overlay from Luxe Gold Cardstock and adhere to the butterfly using dries clear adhesive.

Other Products: 120g white cardstock, scissors or a trimmer, cutting machine, watercolor paint, brush, gauze

Instructions: Create an elegant layered card for granny or mom! From the 5A sheet of the Floral Shoppe paper collection, cut a large and a smaller decorative frame from the HCD2-7308 Majestic Swirl Frames Die kit. Cut a mat layer for the smaller decorative frame from luxe gold cardstock. Put the rectangle between the large and small frame to make it a golden background.

On 120g white cardstock, stamp the jug, leaves and flowers with black ink. Cut with matching dies. Paint with watercolor paints. On the previously prepared frames, apply a layer of gauze with a small amount of glue. Then layer the composition as shown. Use 3D cubes. Cut a heart out of gold cardstock using the heart from the HCD2-7291 Treasured Heart Gift Box Die set. Use the 3D cubes to place the heart in the center of the jug.

Fold a sheet of white cardstock HCPP1-438-2 in half. Measure out a rectangle measuring 6 x 3.75 ''. Glue on the back to form a card base smaller than the decorative frame. And ready! A delicate, openwork card for a loved one is ready.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, Glue Dots, Silver gems, White cardstock

Instructions: Top fold card measures - 5” inches by 7” inches. To create a card base - cut out a 14” x 5” piece of White Card and score it at 7” (long side up). Fold using a bone folder along the score lines. Cut out 4 7/8” x 5 7/8” piece of HCDP1-2123 Paper Collection, distress it with TSMP708 Memento Dye Ink Pad - Olive Grove and adhere it to the card front. Die cut decorative frame from HCGP1-493 Luxe Silver Card using HCD2-7308 Majestic Swirl Frames Die and adhere it to the card front using 3D foam. Cut out 3 1/4” x 5 1/4” piece of HCDP1-2123 Paper Collection then stamp the sentiment from HCPC-3847 Celebrate Love Sentiments Cling Stamp Set using TSMP708 Memento Dye Ink Pad - Olive Grove and adhere final piece on the centre of the silver frame as shown.

Stamp the tree image from HCPC-3939 Cottage Tree 'scapes Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leave and Rich Cocoa using 282873 Tombow Dual Brush Maker N00 Blender. Die cut the image with matching HCD1-7333 Cottage Tree 'scapes Die and adhere it to the card front using 3D foam.

Stamp the leaves from HCPC-3939 Cottage Tree 'scapes Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pad - Bamboo leave using 282873 Tombow Dual Brush Maker N00 Blender. Die cut the images with matching HCD1-7333 Cottage Tree 'scapes Die and adhere it to the card front using both Designer Dries Clear Adhesive and 3D foam to create a more dimensional look.

Stamp the leaves with flowers from HCPC-3939 Cottage Tree 'scapes Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with TSMP708 Memento Dye Ink Pad - Olive Grove, then colour the image with Memento Dye Ink Pads - Bamboo leaves and Rose Bud using 282873 Tombow Dual Brush Maker N00 Blender.Die cut the images with matching HCD1-7333 Cottage Tree 'scapes Die and adhere it to the card front using both Designer Dries Clear Adhesive and 3D foam to create a more dimensional look.

As a final touch, adhere the silver gems and apply 3-D Crystal Lacquer 4 oz 3D1844 on selected leaves.

Other Products: Buttons, twine, brads, ribbon, corner punch

Instructions: Die-cut 6x Album Tags and Accents Die large album tag in kraft cardstock. Place one of the tags back onto the die-cutting machine and reposition the large tag die in the opposite direction, lining up the sides to keep straight and run through the die-cutting machine, this will give you the shaped top (best guy ever) then cut a duplicate. Trim down one tag to make the lower section and round off the corners with a punch. Edge in Archival Sepia and mat and layer the internal sides of the tags using the large tag die and Lush Lilac Paper Collection. Cut a mat for the back lower section but do not adhere just yet.

On one side of each of the shaped tops stamp in Archival Sepia ‘Best Guy Ever’ from Thank You Sentiments Cling Stamp Set.

Die-cut in kraft cardstock and mat with Lush Lilac Decorative Eyelet Accent from Album Tags and Accents Die set. Die-cut in kraft cardstock Ticket Tag from the same set and another in Lush Lilac paper and adhere together. Use a designer strip from the Lush Lilac Paper Collection and mat onto kraft cardstock and then mat onto a wider strip of Lush Lilac and kraft cardstock using Ticket and Tags Die set. Thread brads through the Ticket Tag prior to adhering all together to make the topper. Multiple die-cut A Gift For You from Ornamental Tags Die set in white cardstock and adhere together, snip out the words and edge in Sepia, set aside.

Die-cut in kraft cardstock Ticket and Tags Die tag and mat prior to adhering the topper of the tag and reinforcements. Thread with twine. Stamp out in Archival Sepia Happy Father’s Day from Thank You Sentiments onto the tag and white banner from Arrows and Banner Die. Edge all in Sepia/Pink Peony.

Die-cut 2x kraft card corners from Album Tags and Accents Die set and adhere to the bottom section to hold the Ticket and Tags tag. Score the banner twice each end and fold back on itself to fit inside the tag. With the bone folder shape the front so it sits proud.

Lay all the sections out on table so the front of the top and lower sections and the back of the middle section is facing up. Lay ribbon across all of the sections and adhere the duplicates over to secure the ribbon. The lower section ribbon is held by the mat and topper cut previously.

Thread the buttons with twine leaving a long section on the top button and adhere with hot glue. On the end of the twine die-cut a small tag in kraft cardstock from Ornamental Tags Die set and stamp happy Father’s Day in sepia. Adhere A Gift For You when all assembled.