Instructions:

Cut white cardstock to 6 x 9" size, score and fold at 4 1/2". Cut another piece of white cardstock to 5 5/16 x 4 1/8" size. Stamp the card base and white panel using the ‘Have an Amazing Day’ sentiment in Pink Peony ink to create a sentiment background. Cut a green panel of 4 1/4 x 5 1/2" size from sheet 4B of the Floral Sentiments paper collection. Take the frame and center cutout die from HCD1-7459 Special Floral Sentiment Die, laying the frame in the center of white panel. Only attach the center cutout die, remove the main frame and diecut. Now lay the white panel on top center of the green panel to figure out the placement for cutting out same die piece. Diecut the center cutout die from green panel. Diecut the same die from card front. Sponge the edges of card front and white panel with Pink Peony ink. Attach the white panel on top of the coordinating green panel. Sponge around the opening of panel with Vivid Chartreuse ink and then also use Leaf Green on the top left and bottom right of opening. Sponge the Vivid Chartreuse ink in a rectangular shape on the card front to create a backshadow for smaller panel. Using from the HCD2-7402 Filigree Companion Frame Die, diecut 2 of the corner dies from white cardstock. Attach these frames at the top left and bottom right corners of card front as shown. Now attach the layered panels onto card using dimensional adhesive. 

Stamp the frame sentiment twice from HCPC-31023 Special Floral Sentiment Cling Stamp Set in a combination of French Ultramarine and Viridian onto Deluxe Flower shaping cardstock and diecut one for the frame and the other for the word ‘Special’. Clean the stamp and reuse, this time stamping in a combination of Magenta Hue and Vibrant Fuchsia onto white cardstock. Repeat this again and diecut both frames, using both the outer and inner piece of die. 

Sponge the centers of florals with Vivid Chartreuse and Leaf Green ink. Sponge the leaves with Vivid Chartreuse ink and then use Leaf Green as well. Sponge the florals with Pink Peony and then Vibrant Fuchsia. Use a yellow sponge for thin application of the Crystal Lacquer over both floral frames. Add just a light touch of the Vivid Chartreuse over teal sentiment and the ‘Special’ diecut. Add a light touch of the Pink Peony over the florals in teal frame. Use the shaping stylus to shape the floral frames. 

Attach the teal sentiment frame onto the center inside of card. Attach the word ‘Special’ onto sentiment. Sponge the inside edges of card with Pink Peony ink. Now apply the Dries Clear glue onto yellow sponge and dab over top left and bottom right corners of card, then sprinkle with Crystal Clear glitter. Attach the floral frame around opening as shown using hot glue. Cut off sections of the remaining frame and attach onto the top left and bottom right corners as shown.

Use the Dries Clear glue along with the Mustard glitter to add a touch of sparkle over the floral centers.

Other Products: Hot Glue, Hot Glue Gun, Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

Cut a piece of white card stock measuring 10” x 7” and score in half at 5” to form a 5” x 7” card base. Cut a piece from sheet 2B from the HCDP1-2151 Floral Sentiments Paper Collection measuring 5” x 7” and glue this to the card base. Now cut a piece of Luxe silver measuring 4 3/4” x 6 3/4” and Cut a piece from sheet 8B measuring 4 5/8 x 6 5/8. Using a decorative corner punch, punch the corners of this paper. Adhere these together with Dries Clear Adhesive and attach to the card base. Now using the HCD1-7229 Diamonds and Lace Die set cut the largest die 2x, once from white and once from Luxe Silver Card Stock. Layer and glue these together with the white on top and the silver slightly off set so that the silver is peeking out from behind the white. Attach to the card front using 3D foam tape. 

Using the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set, stamp out the large sentiment stamp using Archival Pigment Brilliance Ink in Crimson Copper and heat emboss using clear embossing powder. (For a similar look Light House Archival Ink could also be used.) Using detail brushes and HCDA1-449 Stack and Store Daubers, color in the frame using Vibrant Fuchsia, Pink Peony, Vivid Chartreuse, Leaf Green, Buttercup, and Periwinkle Archival Inks. Die cut using the coordinating outer die. Stamp the word Grateful out using Vibrant Fuchsia and die cut using the coordinating die. Using that same die, cut 2x more in white card stock and glue all 3 layers together to add height to the sentiment. Glue to the front as shown to give the full sentiment a pop of color. Glue the entire floral sentiment to the Diamonds and Lace die cut using 3D Foam adhesive. Lastly add Stickles to the butterflies for a bit of sparkle.

To complete the inside of the card simply use a piece of the gorgeous paper from the Floral Sentiments Paper Collection.

Other Products: Stickles, Archival Pigment Ink, Clear Embossing Powder, Heat Tool, 3D Foam Tape, Corner Rounder, Stamp Positioner, Scissors, Paper Trimmer, Die Cut Machine

Instructions:

Prepare a card base 5 1/4 x 7 1/2" with the Flower Shaping paper. Add a piece of the floral Sentiment paper on top trimmed slightly smaller.

Die cut all the pieces from the Regal Lattice Gateway set, add glitter to the center part. Use foam dots in the back of the largest one and adhere to the card, add the glittered center.

Stamp the Garden Lily spray and fillers on Gold card stock with the Encore Gold ink, heat emboss with the Gold powder, cut out with the coordinating die. Set aside.

Stamp the leaves on white card stock with the Cottage Ivy ink, color in with the Vivid Chartreuse ink and cut out with the coordinating die.  Place in the matching mold.

Stamp the Garden Lily flowers  on white with the Vibrant Fuchsia ink. Color the center of each flower with the Buttercup ink. Cut out with the coordinating die. Highlight the edges with more of the Vibrant Fuchsia ink and place in the matching mold. Run both the flowers and leaves through the die cut machine to shape. Using the Golf tool put a hole in each flower. Add the stamens and secure with hot glue. Add all the Fillers, leaves and flowers to the card.

To finish, add glitter to all the leaves and flowers.

Other Products: Paper trimmer, Die cut machine, Hot glue gun, foam dots.

Instructions:

To make this easel card, take a 4" x 5" card blank, score, then fold, at 2 1/2" on the 5" side. Cover the sections with dark pink, medium pink and pale green papers from the Floral Sentiments Paper Collection using Designer Dries Clear Adhesive. Cut a 3 3/4" x 4 3/4" piece of Deluxe Flower Shaping paper. Adhere medium pink paper to the front and green paper to the back. Cut a piece of green paper to 3 1/2" x 4 1/2", adhere to front. Adhere this section to the bottom folded half of the Easel.

Die cut two Friend Floral Sentiments from the Friend Floral Sentiment Die set, using Deluxe Flower Shaping paper and the outside edge die, glue together. Ink the edges with Ranger Archival Leaf Green and Vibrant Fuchsia inks, using Daubers. Adhere to Easel front.

Stamp onto Deluxe Flower Shaping Paper with Versamark Clear Embossing ink, three Friend Floral Sentiments, from the Friend Floral Sentiment Cling Stamp Set. Add black Embossing Powder. Heat with a heat tool. Die cut one with the matching die, using the outside edge only. Adhere to card front. Die cut the other two using both the inner and outside edge dies to make two frames.

Color the frames with Zig Clean Color Real Brush Pens - No. 025 Pink, No. 043 Olive Green and No.045 Pale Green, using a water brush. Adhere one frame to card front. Hand cut two sections of flowers and leaves from the second frame. Adhere.

To make the stopper, die cut two Friend Floral Sentiments in Deluxe Flower Shaping paper, using both inner and outer dies. Cut off a corner section of flowers and leaves. Glue together. Take the spare colored frame, cut off the same section. Adhere. Adhere the stopper to base of card with foam tape.  Apply 3D Crystal Lacquer to the flowers and leaves, add clear glitter whilst still wet. All done.

Other Products: 4 x 5" card blank, score board, VersaMark Clear Embossing ink, black embossing powder, heat tool, die cutting machine, foam tape, clear glitter.

Instructions:

The ready top-fold slimline card from smooth cardstock measures 9 1/2" by 4 1/2". To prepare the card base, cut the paper measuring 9 1/2" by 9 " and score at 4 1/2" on 9" length and crease well.

For the card front, choose the pattern paper from the Floral Sentiments paper collection and cut measuring 9" by 4", and frame it with a panel cut from Luxe Gold cardstock creating a delicate border of 1/16" on all four sides. Layer the panel on the ready card front using dimensional tapes. 

Next, cut one each of white and gold die-cut using HCD3-7447 Slim Elegant Rectangle Die. Glue the white die cut on the bottom to add extra strength to the gold one. Next, cut the solid die cut from light color cardstock from the same paper collection and layer the fancy frame on it using glue dots. Further, layer this die-cut panel on the card front. Choose the pattern paper from the designer paper collection and cut the center solid piece. Layer this panel using foam dots in the open window space. Also, prepare 2 labels with pattern paper with a gold border and layer them on top as shown. 

Stamp the floral image with black archival ink on smooth white cardstock using HCPC-31024 Friend Floral Sentiment Cling Stamp Set and paint it using Zig Clean Clear Brush Markers. Cut the frame using its coordinating die set. Glue an extra die cut behind the painted image to add little strength. Now chop the image in 2 parts and embellish the card front as shown. Also, stamp the sentiment from the same stamp set and cut it using its coordinating die set. Glue the sentiment in the center as shown. 

Stamp the butterfly image with white pigment ink on Rajni Chawla's vellum cardstock using HCPC-3953 Small Floral Butterfly Cling Stamp Set and sprinkle white heat embossing powder. Dust extras and heat set it using a heating tool. Cut the butterfly using its coordinating die set and color it using Seedless Preserves Distress Oxide. 

Other Products: Smooth White Cardstock, Funnel Tray, Die Cutting Machine, Foam dots, ScoreBoard, Hero Arts White Pigment Ink.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of dark pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card. Cut a piece of pattern paper 4 3/4” x 6 3/4” and adhere to the front of the pink paper. Die cut the outer frame from the HCD2-7307 Royal Elegance Frame Die from gold cardstock and adhere to the front of the card. Die cut two decorative frames  using the No. 2 frame from the HCD2-7307 Royal Elegance Frame Die - one from green pattern paper and one from Deluxe Flower Shaping Paper.  Adhere the pattern paper frame to the white frame and then adhere to the front of the gold outer frame. Die cut the medium decorative frame using the No.3 die from the HCD2-7307 Royal Elegance Frame Die out of gold cardstock and adhere to the front of the decorative frame.

To create the shaker element, cut a base from green pattern paper using the outer frame die from the HCD1-7461 Grateful Floral Sentiment Die. Stamp the floral frame from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the image with Zig Clean Colour Brush Markers and die cut the frame Die cut another 4 frames using the inner and outer frame dies and stack together. Adhere the stacked dies to the stamped base. Add some sequins and Flower Pearls - Green, Pink, Hot Mama Prills,  to the middle of the frame. Die cut a piece of clear cardstock using the outer frame die and adhere behind the painted image. Adhere this to the front of the stacked dies to create the shaker element.

Stamp the sentiment from the HCPC-31025 Grateful Floral Sentiment Cling Stamp Set in Picked Raspberry ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Die cut another plain die and adhere the stamped image on top and then adhere to the centre of the frame as shown.

Stamp the leaves from the HCPC-3932 Large Floral Urn Cling Stamp in Olive ink on Delxue Flower Shaping Paper and die cut with the coordinating die.  Colour the images with Leaf Green ink and Magenta Hue on the front and Leaf Green ink on the backs.  Shape using a medium golf tool and adhere to the top left and bottom right with foam squares.

Stamp the rose images from the HCPC-3906 Small Wild Rose Cling Stamp set in Magenta Hue ink and die cut with the coordinating dies. Colour the petals with Rosey Posey, Cactus Flower and Plum inks and the backs with Rosey Posey ink. Shape using the coordinating mold. Add a dollop of hot glue to the centres of the flowers to create depth for the centres and then add Heart of Gold Prills and adhere over the leaves.

Stamp the butterfly image from the HCPC-3953 Small Floral Butterfly Cling Stamp in Jet Black ink on Iris cardstock. Colour the image with Zig Clean Colour Brush Markers and die cut with the coordinating die. Add Crystal Clear glitter to the wings using Dries Clear glue and adhere to the bottom right of the frame as shown.

To finish, add Crystal Clear glitter to the flowers and leaves with clear gloss gel medium and a paint brush. Add Ultrafine Crystal glitter to the pink sentiment with Dries Clear glue.

Other Products: Iris Cardstock, clear gloss gel medium, paint brush, Distress Oxide ink - Picked Raspberry, hot glue gun, Dress My Craft Sequins, Dress My Craft Flower Pearls - Green, Pink, Ranger Archival ink - Rosey Posey,

Instructions:

Cut out a 5" x 7 1/2" base from white paper, then cut a slightly smaller rectangle from the paper colections and glue it to the base. Cut a 4 1/2" x 7" rectangle from the white paper from the collection. Cut out a slightly smaller rectangle from the paper collection.
Then cut out a 4" x 6 1/2" rectangle from the white paper and glue it to the card. Cut out a slightly smaller rectangle from the white paper with Double Dots 100pc. - 3D Foam Circles.Stamp the image from the Grateful Floral Sentiment Set in the center of the card with black ink.

Stamp the image from the Grateful Floral Sentiment set on white paper with embossing ink, cover with with pink embossing powder, heat it with the embossing heater. Then cut with the coordinating die. Color with watercolor pencils. Use the same die to cut out an element from silver paper and glue under the previously cut element so that it sticks out a little from the bottom. 

Glue as shown.

Other Products: Die cutting machine, Embossing Powder pink, watercolor pencils, embossing Stamp Pad

Instructions:

My card base is 4" x 9" and I used the Deluxe Flower Shaping paper because it is a perfect weight for cardmaking. Make card base and cover inside and out with pieces of 1B of the paper collection. Using a die from the set cut out an opening in the front of the card.  Cover the cut out piece with a piece of Sheet 3A of the paper collection and glue to the inside of the card. This then becomese the piece that will hold the sentiment. Stamp the sentiment in Rose Madder and cut out 3 times and glue together so the piece is very dimensional. Glue to the inside panel.

Stamp the flower petals onto Deluxe Flower Shaping paper using Rose Madder and color the centers with Buttercup and the edges with Rose Madder. Cut out using coordinating dies, lay onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry. When dry add Prills to the center and allow to dry. I glued two petals together to make the flowers.

Stamp the leaves in Leaf Green, color with Vivid Chartruese and cut out with coordinating dies. Edge the leaves with Olive ink, lay onto the mold, spritz with water and run through the die cut machine. Turn out onto the desk to dry.

Die cut the Slim Elegant Rectangle Die out of white cardstock and glue to the card front. Decide on placement of flowers and leaves and use hot glue to glue down. Dilute some Designer Dries Clear Adhesive and paint with a brush onto the petals and sprinkle with glitter. Allow to dry and the card is finished.    

Other Products: Die Cut Machine, Hot Glue Gun, White Cardstock

Instructions:

Ready tent fold card measures 5" × 7". Cut a mat from designer paper collection measuring 4.75" × 6.75". Adhere it on ready card base. Cut another mat from designer paper measuring 4.25" × 6.25", adhere it on white cardstock which is 1/8 of an inch bigger on all four sides. Mat it on card using dimensional tape. Cut a Slimline frame from white cardstock and a frame from luxe gold cardstock using Slim Ornate Rectangle die. Glue both frames together. Cut this frame and arrange it on card using foam dots as pictured. Cut a frame from white cardstock using die from the same set. Take a piece of white cardstock measuring 4" × 1.5". Trim the frame and glue on white cardstock piece as pictured. Glue it on card. Stamp sentiment on white cardstock using leaf green and olive green ink . Stamp multiple times to achieve desired result. Cut with coordinating die, cut more 5 pieces from white cardstock. Glue together to add dimension. Adhere it on card as pictured.

Stamp frame on watercolor paper using pebble beach Archival and paint with zig markers. Cut with coordinating dies. Cut it and arrange it on alternate corners of card using foam dots as shown. For finished look, apply Crystal Lacquer on florals and sentiment using sponge. 

Other Products: Smooth white cardstock, Watercolour Paper

Instructions:

Cardstock size 10” x 7”. Score at 2.5”, 5”on longer side (after folding final size is 5” x 7”). Cut pattern paer forthe panels and adhere on base.

Cut one die from HCD3 7448 Slim Ornate Rectangle die on white cardstock and luxe gold cardstock, adhere both togethera  little offset, trim and adhere on card base as shown.

Cut another die from HCD1-7397 French Gate Die on white cardstock and luxe cardstock and adhere it on first flap a little offset.

Stamp image from HCPC 31025 Grateful Floral Sentiment Cling Stamp set using archival ink-Jet Black and another layer with archival ink-Mulberry on white cardstock and cut it with coordinating die. Color it with Zig markers, add crystal clear glitter.

Using same stamp set, stamp it on pattern paper using archival ink-leaf green, and cut it with coordinating die, adhere it using foam tape, as shown.

Other Products: Big Shot plus machine.

Instructions:

Card size:  4 x 9”. Fold 8 x 9 1/4” white cardstock to measure 4 x 9” then place the Slim Elegant Rectangle outer die over edge of fold by about 3/8” so that fold does not cut through completely. Cut another card front from Fuchsia decorative paper then glue it to base matching sides and bottom edges.

Cut Decorative outer part of die from white and from gold, glue together slightly off-set then glue to card front, centering.  Use this die again to cut a lighter pink decorative paper for the inside of gold and white decorative frame. Glue to card.

Cut 2 layers of the slim Elegant Rectangle inner parts, 1 from gold and a slightly smaller one from white then glue together and pop up to center of card.

Stamp Have An Amazing Day on white using Vibrant Fuchsia, die cut then die cut a gold layer, glue together slightly off-set then glue to the center of the card front.

Stamp lilies using Sunflower ink on Deluxe Flower Shaping Paper, die cut, sponge edges then use a yellow chalk pencil (or other pencil) to fill in lily center and stripe on petals, rub out slightly (if using chalk).  Form in the mold, glue 2 blossoms together for each flower, use 1 for the bud, stamping side out. Punch a small pointy flower to use as sepal for the bud, Use Golf Groove Tool to pierce centers and to further form lilies.  Insert stamen, 3 for each flower (yellow used for this sample).  Glitter petals.

Stamp leaves using Fern Green, sponge with Leaf Green, die cut then form in the mold, Lacquer leaves using 3D Lacquer and shimmer additive (optional).  Arrange leaves and flowers on the left side of sentiment.

Stamp small butterfly using embossing ink on vellum then heat emboss with gold powder, die cut then add a thin layer of Diamond Stickles to the wings.  Put pop up under body only and adhere to card on the right side.

Glitter card as desired, add white pearls to decorate decorative gold and white Slim Elegant Rectangle frame.

Other Products: White cardstock, embossing ink, pearls, Shimmer additive, Diamond Stickles, yellow chalk pencil, small flower punch for sepal on bud

Instructions:

The finished card measure 6 x 6". Take a 12 x 6" white base and fold it in half to make a side fold card. Cut a 6 x 6" piece of pink paper sheet #12B from the Floral Sentiment collection. Cut a 5 3/4 x 5 3/4" piece of deluxe flower shaping paper. Cut a 5 1/2 x 5 1/2 piece of pattern paper in the paper # 10A from the Floral sentiment collection. Glue all of them on the card base with 3D foam.

Stamp the sentiment from Special floral sentiment onto a piece of watercolor paper using leaf green ink. Color with zig markers. Add crystal lacquer on your butterfly and yellow prills on the flowers. Glue on your card with 3D foam.

Stamp the word Special in green leaf and die cut three time with the coordinating die.  Glue it on each other and add 3d crystal clear. 

Cut flowers from paper #2B, add prills in the center and glue it under the sentiment.

Other Products: Die cutting machine cut'n boss, scissors, water mister, hot glue gun, watercolor paper,

Instructions:

Slim tent fold card base is 9 x 4”. Using the outside Slim Ornate Rectangle Die, cut 2x from white cardstock. Before cutting the second one, adhere 1/2” double sided tape to the top of the white cardstock. After cutting, score and fold underneath the tape, remove the backing and adhere the two diecuts together to create card base. Using the same die cut 2x from sheet 7B of the Floral Sentiments Paper Collection and trim one to fit inside the card. Ink the edges of both with Buttercup ink and adhere to the card front and to the inside. Cut the largest label from the Slim Elegant Rectangle Die, stamp the ‘Have a Wonderful Birthday’ sentiment from the Special Birthday Sentiments Cling Stamp set using Vibrant Fuchsia ink, ink the edges with the same ink and adhere inside the card. Diecut the decorative frame using the Slim Ornate Rectangle Die 2x, once from white cardstock and once from Luxe Gold cardstock. Sponge the white diecut with dries clear adhesive and sprinkle with Rajni Chawla’s crystal clear glitter. When dry, adhere the white on top of the gold, slightly offset, and adhere to the card front. Diecut the largest Slim Elegant Rectangle label die from Luxe Gold cardstock and the next size from white cardstock. Dry emboss with a textured embossing folder, adhere together and adhere to the center of the card front. 

Stamp the Special Floral Sentiment frame on watercolor cardstock 2x, once using Emerald Green ink and once using Vibrant Fuchsia ink. Color just the foliage on one using Zig Clean Color Real Brush Marker – Emerald green. Color just the flowers on the other using Zig Clean Color Real Brush Marker – Peach Pink and Yellow for the flower centers. Diecut using the coordinating dies and cut the frame apart, gently shape the part being used for this card using the Deluxe Flower Shaping Kit. Add dries clear adhesive to the flower centers and sprinkle with You Had Me at Yellow prills. Stamp the ‘Have an amazing Day’ sentiment from the same set on white cardstock using Vibrant Fuchsia ink, diecut with the coordinating die and diecut three more times from white cardstock. Adhere the diecuts together with the stamped image on top. Sponge the sentiment and the floral piece with dries clear adhesive and cover with Rajni Chawla’s crystal clear glitter. Adhere the floral piece to the left side of the card front using dimensional squares and hot glue. Adhere the sentiment to the labels in the center. 

Stamp the Small Floral Butterfly on Vellum Flowerite using VersaColor pigment white ink, cover with white opaque embossing powder, heat set using the Heat It Tool, color the back using Vibrant Fuchsia ink and diecut using the coordinating die. Gentle shape the butterfly and adhere to the top right of the card front using hot glue.

Other Products: Diecutting Machine, Paper Trimmer, White Cardstock, Embossing Folder, Misti, Double Sided Tape, Dimensional Squares, Hot Glue Gun, Bristol Vellum Surface cardstock,

Instructions:

For the card base, take Deluxe Flower Shaping cardstock and create a ready folded card measuring 9" by 6". Cut panel from Floral Sentiments Paper Collection measuring 8 3/4 by 5 3/4 inches and adhere it on the card base using clear glue. Cut another panel on the deluxe card measuring 8 by 5 inches, adhere this panel on the last panel using dimensional tape, trim another panel from black card stock measuring 7 3/4 by 4 3/4 inches apply Kitsch Flamingo Ink on the upper right and bottom left corners using stencil and dauber, adhere on the last white panel using clear glue. 

Stamp the image from Grateful Floral Sentiment Cling Stamp Set on the Gold Luxe Card using Versamark Embossing Ink, cover with golden tinsel embossing powder, heat it using heating tool, die cut using coordinating dies, add extra layer underneath for the sturdiness. Cut this frame in parts and add as shown as a doily format using dimensional tape.

Stamp the Wild Poppies with VersaMark Embossing Ink on Deluxe Flower Shaping paper, cover with white embossing powder, heat using heating tool, die cut using coordinating dies. Color the centers with Leaf Green ink, color the poppies edges with Archival Pink Peony Ink using dauber, shape the flowers using golf groove tool and heartfelt creations shaping kit and make a few flowers using hot glue. Add green mini prills in the centers, embellish the flowers with Nida Tanweer Magic Glitter Powder.

Stamp the Wild Poppy accents on the Deluxe Flower Shaping paper using Leaf Green ink and color the image with Mowed Lawn Distress Ink and Pink Peony Ink, die cut using coordinating dies, cover with Magic Glitter.

Stamp the small Wild poppies with Vibrant Fuchsia on cream card color the centers with leaf green ink shape the flowers using golf groove tool and heartfelt creations shaping kit and make few flowers using hot glue, add green Nuvo Drops in the centers, embellish the flowers with Nida Tanweer Magic Glitter Powder.

Arrange all ready elements as shown using hot glue, and embellish the card with Paper Magik Decorative Beads and Nuvo Drops.

Other Products: Black Card Stock, Cream Card Stock, Dimensional Tape, Nida Tanweer Magic Glitter, Versamark Embossing Ink, Paper Magik Decorative Beads, Hot Glue, mowed lawn distress ink, Stencil, Kitsch Flamingo Ink, Golden Tinsel Embossing Powder.

Instructions:

Score a 11" x 4 1/4" piece of Deluxe Flower Shaping paper at 5 1/2" and fold at the score line to create a 4 1/4" x 5 1/2" card base. Cut a 4" x 5 1/4" piece of pattern paper from Floral Sentiments paper collection and adhere it on the card base.

Stamp the image from Special Floral Sentiments Cling Stamp set on a piece of Deluxe Flower Shaping paper using Vibrant Fuchsia and Cactus Flower Archival inks and die cut this imge using the matching die from Special Floral Sentiments die. Adhere it on the card base using foam tape as shown.

Other Products: Ranger Stamp Platform and double sided foam tape

Instructions:

Create base using outside Majestic Swirl Frame Die. Cut two pieces from white cardstock, glue it together on the top, using frame die cut from paper collection paper and place into card using Foam Strips for dimension. Cut frame from silver paper and place onto the card using adhesive foam strips. Cut out the smaller frame from paper collection and silver paper. Place on the top of card using adhesive foam strips.

Stamp Special Floral Sentiment Cling Stamp Set on the white paper using using Ranger Archival Ink Pad - Jet Black and cut using the coordinating dies. Sprinkle Circa Embossing Powder - Iridescent and melt using heat tool. Shadow background sentiment using pencils. Colour with pencils. Place onto the card using adhesive foam strips.

Other Products: Circa Embossing Powder - Iridescent, Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, pencils

Instructions:

Make a card base measuring 7 1/2 inches by 5 inches from white cardstock. Add another mat layer of gold card stock little smaller than the card front. Choose pattern paper little smaller than the gold mat layer and adhere.

Cut a piece of gold die cut from the Diamond Fluer set and add to the card base. Cut an A2 card panel from the pattern paper collection and adhere a piece of gold mat layer at the back at the whole piece and add this on the centre of the card.

Stamp the Iris flowers in majestic violet and sunflower ink on Deluxe Flower Shaping paper. Colour with the same colours and make the flowers like after cutting them with matching die. 

Stamp the leaves with  English Ivy on Deluxe Flower Shaping paper and colour with leaf green ink. Cut with matching die and shape in the Deluxe flower shaping tool kit.

Stamp the accents in Cactus flower and English Ivy Archival ink on Deluxe Flower Shaping paper from the Iris Garden Accents stamp set. Colour with the Archival inks and cut with matching die .

Cut a bird house image from pattern paper using the small circle die. Add a mat layer of gold paper at the back. 

Stamp the sentiment from the Friend Floral sentiment stamp set using Mulberry ink. Cut out with matching die but use only My Friend words.

Adhere the Iris flower and the coloured  elements of the Iris Garden Accent and add to the card front.

Add the sentiment to finish the card. 

Other Products: Scoring board, die cutting machine

Instructions:

Create a card base with the Ornate Flourish Gateway Die in white cardstock. Use the base die to cut out a piece of green paper from the Floral Sentiments Paper Collection and adhere, cut out the decorative frame in yellow paper and adhere. Cut out the three decorative center pieces in white cardstock and adhere.

Stamp the frame from the Special Floral Sentiment Cling Stamp Set in Jet black and sponge with Sunflower, Coastal Coral and Vivid Chartreuse, cut out with coordinating dies, also cut out in Luxe Gold Cardstock, adhere offset with foam tape to create a shadow as shown. Sponge sentiment with Sunflower, Vivid Chartreuse and Coastal Coral and adhere to card front and adhere frame on top with foam tape.

Stamp the Small Wild Rose Cling Stamp Set in Bright Tangelo, cut out with coordinating die and sponge with Sunflower and Bright Tangelo, sculpt with Small 3D Wild Rose Shaping Mold and add stamens and glitter.

Stamp the leaves from the Leafy Accents Cling Stamp Set in Olive, cut out with coordinating die and sponge with Vivid Chartreuse.  Sculpt with Leafy Accents Shaping Mold.

Adhere leaves and flowers as shown.  

Other Products: White cardstock

Instructions:

Fold white cardstock to 6.5 x 6.5" with fold on the left then use the biggest die from the Simple Centerpiece Die set to cut leaving the left side of the die over-hanging fold by about 1.5". Cut another full front with the same die from the white cardstock and another one from the Floral Sentiments Paper Collection. Glue the front on. Cut out a silver and a white frame with die from the Elegant Hearts Centerpiece Die set. Cut out a green panel from the Floral Sentiments Paper Collection with die No. 5 from the Simple Centerpiece Die set. Adhere them to the base. Stamp the sentiment with the Friend Floral Sentiment Cling Stamp Set in Forget Me Not ink and cut it out with coordinating die. Cut out a green panel from the Floral Sentiments Paper Collection with die No. 3 from the Simple Centerpiece Die set. Stamp the sentiment with the Special Floral Sentiment Cling Stamp Set in Forget Me Not ink and cut it out with coordinating die. Adhere them inside of the card.

Stamp blossoms from the Iris Garden Petals Cling Stamp Set in Forget-Me-Not ink onto Deluxe Flower Shaping Paper. Color their edges and their centers with the same ink, diecut with coordinating dies and shape with mold. Add Pastel Pearl Small stamens to all flowers. Stamp blossoms from Cottage Garden Hydrangea Cling Stamp  in Forget-Me-Not ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Go Mango Prills. Stamp 3 branches from the Leafy Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating dies and shape with coordinating molds. Stamp branches from the Iris Garden Accents Cling Stamp Set in Fern Green ink, color them with the Leaf Green ink, cut out with coordinating die. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and branches and add some pearls.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, colored pencils, pearls, sisal