Other Products: White cardstock, Versamark ink, black embossing powder, gold glitter, scissors, paper trimmer, die cutting machine

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Cut white cardstock to 12 x 6", score and fold at 6". Cut a piece of green background paper from the Snowy Pines collection to 5 7/8 x 5 7/8" size. Sponge the edges of panel with Leaf Green ink and attach onto card base. Diecut the largest oval die from Ornate Ovals set from the Luxe Gold Cardstock. Use double dots to attach onto top half of card as pictured. Stamp the Merry Christmas sentiment in Vermillion ink onto bottom half of card as shown.

Stamp the pine frame from Snowy Pines Cabin stamp set in Versamark ink onto white cardstock, sprinkle with black embossing powder and heat set. Diecut with coordinating die.

Use Zig Markers with blender and inky daubers to color. Color the pine cones with Sepia ink and brown marker. Use Leaf Green ink, Green and Olive Green marker on the pine spray. Use the same Green markers on the trees. Use Sepia ink, Carmine Red & Brown markers on the birds. Use the Dark Brown marker on the cabin, lane and fence. Use the Carmine Red and Dark Brown marker on the mailbox. Now attach pine frame and cabin scene onto card as pictured.

Use the Dries Clear glue along with gold glitter on the pine frame and rest of card as desired. Use the same glue along with Crystal Clear glitter on the snowy cabin scene.

Other Products: White cardstock, acrylic block, die cutting machine, scissors, jute ribbon, gold glitter, foam adhesive, score board and paper cutter

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Cut white cardstock to 5 1/2 x 11”, score and fold at 5 1/2”. Using the Snowy Pines paper pad, cut a red mat slightly small than card base, then another green patterned paper even smaller. Adhere onto card base. Cut a 1” green plaid strip from paper collection and choose sentiment from paper collection, mat each on with Gold Luxe cardstock, then adhere towards bottom of card base using dries clear glue and foam adhesive.

Die cut two large ovals from HCD1-7305 Ornate Ovals Die from white cardstock. On one of these ovals diecut an oval from the Eyelet Oval and Basics Small die set to create a frame, reserve oval. Diecut a slightly larger oval using the Eyelet Oval and Basics Large die set on clear cardstock, adhere white oval frame onto clear cardstock using Dries Clear glue. On reserved oval, stamp cabin image using Jet Black ink. Color using Stack and Store daubers along with Fantastix for the smaller areas, with Coffee, Fern Green, Sunflower, Vermillion inks. Use a light hand to lightly shade the snow and sky with Manganese Blue ink. Adhere cabin scene oval onto Ornate Oval as the background of the shaker feature. Arrange foam strips along background oval being sure there aren’t any gaps, as this will need to securely hold the glitter we’ll place inside. Insert desired amount of Rajni Chawla’s Crystal Clear into shaker opening, then secure the clear cardstock oval frame onto this. This creates the shaker feature.

Stamp Snowy Pines Cabin scene onto white cardstock using Jet Black ink, diecut using both the outer and inner die of the wreath, discard cabin scene. Color oval wreath using Stack and Store Daubers, color the pinecones and birds with Coffee ink, and foliage with a blend of Olive and Fern Green inks. Shape using Deluxe Flower Shaping kit and adhere onto shaker feature. Adhere shaker onto card base using Dries Clear Glue. Add Jute ribbon along the bottom, then finish with gold glitter as desired.

Other Products: alcohol markers, die-cut machine, paper trimmer, scissors, fluffy stuff, clear embossing powder, versafine onyx, half pearls, gems, hot glue gun, versamark

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Stamp out Snowy Pine Cardinals and Festive Pine Cones with memento tuxedo black ink and colour with alcohol markers. Stamp over in versafine onyx and clear heat emboss. Use the co-ordinating dies to cut outline Snowy Pine Cardinals outer edge, Snowy Pines Cardinals birds and branch and Festive Pine Cones. Die-cut 2no. largest Ornate Oval in red and another smaller in white to write or stamp your message on. Die-cut the flourishes, small leaves and vines on white cardstock and gold heat emboss. Add fluffy stuff to the branches and heat emboss. Use dries clear to add glitter to the fluffy stuff for sparkle.

Create a 6 x 6” white side opening card base and score vertically down the centre of the front and crease to create the Z fold. Cover the front, side and internal back of the card with Snowy Pines Paper Collection. Snip off foliage and bow from Festive Pine Cones. Use an alcohol marker to colour the half pearls and add to berries on the bow, adhere with hot glue. Mat and layer Snowy Pines Cardinals onto the Ornate Ovals with dots and also to the back left hand side only of the Ornate Oval and adhere to the front of the card. Shape foliage, branches, cones and cardinals and tuck in with gold embossed decorative elements. Mat and layer the internal Ornate Ovals behind the front oval with dots and tuck in the remaining die-cuts. Finish with some gems.

Other Products: White cardstock, gold sticker nail heads, Fun Foam, Foam Tape, Copics: E31, E33, E35, YG61, YG63, G99, R23, R24, R29, C1, C3, C5,

video For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

Instructions: Card size: 6 x 6”. Start with a 6 x 6 folded card base. Cut 1 gold panel 5 3/4" Square, glue to base then cut decorative paper as follows: Red- 3 x 5 11/16” and 2 green gingham- 1 5/16 x 5 11/16”. Glue red paper to the center of gold panel then glue green gingham paper to the top and bottom of red (make sure there is a 1/16” border of gold all the way around).

Cut 1 white Petite Pocket Accent, 1 white Decorative Pocket Accent and 1 white Ornate Oval. Cut 1 gold Petite Pocket Accent (then border), 1 gold Decorative Pocket Accent and 1 gold Ornate Oval. Glue each pair together. Cut 1 Fun Foam Oval large enough for the back of the Ornate Oval pair and glue it to the back. Glue the Petite Pocket accent pair to the top gingham right on the edge of green and red then glue the Decorative Pocket Accent pair to the bottom gingham on the edge of green and red. Glue the Oval stack to the center of card over both pocket accents (centered).

Stamp Sentiment using red onto a strip of green decorative paper, cut a fish tail at the end, curl sentiment and glue to the card above Petite Pocket Accent at an angle, add 2 gold “nail head” stickers.

Stamp cabin scene twice and cardinals once using black ink. Die cut and color. The cabin is die cut leaving just the wreath on 1 and on the other, leaving all but the sky. The sky is blue paper sponged with white pigment ink then some red dabbed onto the white. Cut it to fit the back of the cabin scene. On the back of the wreath die cut, add some very thin strips of foam tape to pop it up over the wreath on the other (full) die cut with cabin. Cut the cardinals apart as needed to add to the wreath on top of the existing birds.

Glitter the cabin scene and wreath (except birds) then glue the cabin scene with popped wreath and cardinals, to the Ornate Oval Pair. Randomly glitter card.

Other Products: Glossy accents, golden ribbon, die cutting machine, dimensional tape, hot glue gun.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Make a card base from white card stock measuring 6” x 6”. Add a mat layer from paper collection that is a little smaller than the card base and adhere to the card front.

Cut an A2 card panel from the paper collection and remove the centre part, leaving just the outer frame. Add a backing from the paper collection and adhere this panel on the right side of the card with foam tape, a little towards outside.

Cut the Ornate Oval Die cut in Luxe gold paper and remove the centre using the basics oval die. Layer it with another gold die cut from the same set.

Stamp the pine cone image two times on white card stock with Jet black ink. Colour the image with Zig real brush pens. Cut with matching die. Emboss the pine cone image at the back using the ball tool from the flower shaping kit. Stamp many images of the holly leaves on flower shaping paper from the Christmas poinsettia and holly stamp set with olive green ink. Colour with Leaf green ink using sponge daubers. Cut with matching die and shape the leaves in the 3D shaping mold.

Arrange the leaves on the top of the card panel with Hot glue. Add bows and ribbons. Add the pine cone with dimensional tape. Add glossy accents on the cherries.

Add an oval die cut in luxe gold paper and add to the left base. Stamp the sentiment from Candy cane cottage set on the Ornate oval label. Adhere this on oval die to finish the card.

Other Products: Basic gray ink – Stampin up!, foam pads, white card stamping card, versafine clair black ink

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Die cut the largest ornate oval using luxe gold card and adhere to a white die cut of the largest eyelet oval using foam pads

Stamp the snowy pines image twice onto white stamping card and stazon ink and colour the pines and birds using the water colour makers, die cut one image using the outer and inner die. Colour the sky and coloured elements of the scene on the 2nd image and die cut using the outer die only. Add dries white adhesive to the roof tops and cover with crystal clear, remove excess. Add the pine cone wreath to the scene using foam pads. Adhere to the gold die cut.

Cut a 4” x 10” strip of white card and score at 2.5” and 5”. Cut a 4” x 4.5” gold luxe card and adhere to the base of the card. Cut a 2.5” x 4” gold luxe card and adhere to the front of the easel.

Die cut the 2nd ornate oval and adhere to the front of the card base.

Stamp the sentiment onto white card using versafine clair black ink, cover with clear embossing powder, remove excess and heat to set. Die cut using the 3rd ornate oval. Die cut a second shape and adhere the diecuts on top of each other, adhere to the base card using foam pads to create a stopper.

Adhere the large eyelet oval scene to the front of the easel and add nuvo drops to the card base.

Other Products: Score Board, Die Cutting Machine, Cuttle Bug Embossing Folder, Scissors, Smooth White Cardstock, Double-sided tapes, Funnel Tray, Heat Tool, White embossing powder, Versamark Embossing Ink, Texture Paste, Glitter Dust, Pearl String, Twine.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: The ready top fold card from white card stock measures 7 5/8″ by 5 3/4″. To prepare the card base, cut a smooth white cardstock measuring 7 5/8″ by 11 1/2″. Score the longer side at 5 3/4″. Crease and fold the card neatly. Cut panel from white card measures 7 1/8 by 5 1/4” and emboss it using embossing folder. Adhere this panel on card base using foam tape. Adhere pearl string around this panel as shown using clear glue.

Next, using Decorative Cage Die, cut shadow die cut from white card and cage die cut from gold Luxe cardstock. Glue both the die-cuts together using clear glue, add twine. Layer this cage on card front using foam tape.

Stamp image from Snowy Pine Cardinals Cling Stamp Set, on white cardstock, using Coffee archival ink and color the cardinals, using Zig markers, cut birds using coordinating die, Layer the cardinals on the cage as shown. To add snowy effects, use texture paste and sprinkles glitter dust.

Stamp Festive Pine Cones Cling Stamp Set using Leaf green ink color it using Vivid Ink cut it using coordinating die.

For Poinsettias, stamp the florals from Candlelit Poinsettia Cling Stamp Set using Embossing Ink, cover with white embossing powder and heat using heat tool. Cut using the coordinating dies. Color the flowers using Vermillion Ink. Shape using shaping mold and make a few flowers using Deluxe Flower Shaping Kit. Add prills to the centers. Add glitter dust.

Once all the elements are ready, assemble the card as shown. Cut the sentiment from paper collection and finish the card.

Other Products: Small Foam Dots; Die cut machine;

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Prepare a 6 x 6” white easel card. To accomplish that cut a 6 x 12”, score at 3” and 6”. Cut another piece 6 x 6”.

Cut 2 of the 6 x 6” panels from the Snowy Pines paper collection, trim slightly smaller and adhere one to the inside and one to the 6 x 6” front. For the inside cut a piece of the red 2 1/4 x 5 1/8”, lay another piece slightly smaller on top. Add foam dots to the back of the red and adhere to the card base.

For the front panel, use white cardstock and cut out one of the circles, use the next smaller circle and cut the birds from the paper out, add foam dots and adhere to the top of the panel as shown.

Cut a piece of white 2 1/2 x 6 3/4”, place the Starry Night border die on top, cut, place on the other end and cut. Cut a piece of the red and layer on top of that, add foam dots and adhere to the card.

Stamp the leaves with the Cottage Ivy ink, color with the New Sprout, cut out with the coordinating die, ink the edges with the Bamboo Leaves ink, place in the mold and shape.

Stamp the flowers with the Lady Bug ink, lightly color, cut out with the coordinating die, and ink the edges with the same ink only darker. Place in the mold, shape, put 2 together making one flower. Adhere the leaves and flowers on the red strip. To finish, add glitter and prills.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, Distress Ink Peeled paint, sisal, promarkers

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Wild Rose Collection watch the tutorial at https://youtu.be/2ALPhFnT-qI.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 5 11/16 x 11 3/8", score at the center and fold to get a square base. Cut a piece of green paper from Snowy Pines Paper Collection 5.,5 x 5.5". Adhere it on the base. Cut out a piece 5 1/16 x 5 1/16” of white paper and again a piece of green paper 4 7/8 x 4 7/8”. Adhere them together and attach them onto card using adhesive foam. Cut out an oval of green paper from Snowy Pines Paper Collection. Cut out two white ovals with Ornate Ovals Die, the smaller cut in half and adhere them as pictured at the center of the card.

Stamp the smaller Festive Pine Cones Cling Stamp Set in Jet Black ink onto white cardstock and cut it out. To make this card you`ll need about 2 pine cones. Stamp the Snowy Pines Cabin Cling Stamp Set in Jet Black ink onto white cardstock and cut it out. Color them slightly with markers, then use the Stack and Store daubers to add more color all birds, leaves and pines. Then adhere the stamped wreath as pictured at the center of the card.

Stamp blossoms from Large Wild Rose Cling Stamp Set and Small Wild Rose Cling Stamp Set in Red Geranium ink onto Deluxe Flower Shaping paper and diecut with coordinating dies. To make this card you`ll need 2 large red blossoms and 1 small red blossom. Cut out 6 small Flowering Dogwoods from Deluxe Flower Shaping paper and shape them with shaping mold. You`ll also need about 6 branches from Oakberry Lane Blossoms Cling Stamp Set. Stamp them in Leaf Green ink, cut out with coordinating dies.

Use the Stack and Store daubers to color all flowers and leaves. For flowers use Red Geranium ink. For leaves use Distress Ink Peeled paint, Red Geranium and Leaf Green ink. Shape the leaves using their coordinating shaping molds. Use the Deluxe Flower Shaping stylus to shape all red flowers. Ink some stamens with Red Geranium ink. Thread inked stamens through the centers of flowers and attach with hot glue, trimming off the excess string. To small flowers use white stamens. Use dimensional adhesive and hot glue to attach lace, blossoms and leaves onto card as pictured. Add a piece of paper with sentiment.

To add that extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and corners of paper.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Pearl White Cardstock, Scissors, Hot glue gun; Ranger Distress Ink pads - Barn Door; Stampin’ UP! Ink Pads - Garden Green;

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Top fold card measures - 5 inches by 7 inches. To create a card base - cut out a 10” x 7” piece of white card and score it at 5” (long side up). Fold using a bone folder along the score lines. Cut out 5” x 7” and 4” x 6” pieces of the Paper Collection and adhere them on the card front as shown. Die cut decorative frame from Pearl White Card using HCD2-7191 Intricate Swirl Frames Die, add an additional layer of White Card on the back and adhere the final piece to the card front using 3D foam. Die cut decorative rectangle from Paper Collection using HCD2-7191 Intricate Swirl Frames Die, add additional layer of White Card on the back and adhere final piece to the card front using Dries Clear Adhesive.

Stamp and colour the wreath image from HCPC-3919 Snowy Pines Cabin Cling Stamp Set with Stampin’ UP! Garden Green Ink Pad. Die cut the wreath image with matching HCD1-7304 Snowy Pines Cabin Die, add an additional layer of White Card and adhere the final piece to the card front using 3D foam.

Stamp the wreath image from HCPC-3919 Snowy Pines Cabin Cling Stamp Set with Stampin’ UP! Garden Green Ink Pad and colour it with Stampin’ UP! Garden Green Ink Pad using Daubers. Leave it to dry completely and add more details with Gold metallic Paint or NU802 Indian Gold Nuvo Mousse using 409311 Color In Watercolor Brush. Add an additional layer of white card on the back and adhere the final piece on the top of the previously adhered wreath.

Top tip - Make sure to offset them to achieve a more dimensional look.

Stamp and colour the pine cone images from HCPC-3917 Festive Pine Cones Cling Stamp Set on Paper Collection piece with Stampin’ UP! Garden Green Ink Pad. Die cut the pine cone images with matching HCD1-7302 Festive Pine Cones Die, separate pine needles from pine cones using scissors, then shape pine needles using HCST1-401 Deluxe Flower Shaping Kit.

Stamp poinsettia images from HCD1-7249 Christmas Poinsettia & Holly Cling Stamp Set on HCPP1-475 Deluxe Flower Shaping Paper with Vermillion Archival Ink Pad, then colour images with Barn Door Distress Ink using HCDA1-449 Daubers. Die cut the images with matching HCD1-7249 Christmas Poinsettia & Holly Die, then place them in HCFB1-478 3D Christmas Poinsettia Shaping Mold, spray them with water and run them through die cutting machine. Assemble poinsettia flower petals using a hot glue gun. Use a paper piercer to make a hole in the middle of it and pull some stamens through it. Add a little hot glue underneath the flower to secure the stamens. Using a sponge, add Designer Dries Clear Adhesive to the flower petals and pine cones and sprinkle them with Rajni Chawla's Crystal Clear Glitter. Then adhere flowers to the card and fill in the composition with pine cones and red Rose Hip Stamens.

Other Products: Stickles, Gems, Cardstock (White, Brown, Kraft), Distress Oxide Ink (Fired Brick, Ground Espresso), Waterbrush, Blending Tool, Scrapbook Adhesives by 3L (3D Foam Squares, Crafty Foam Tape, E-Z Runner Ultra)

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Die cut the Ornate Ovals images from white cardstock. Die cut the Majestic Swirl Frame from white cardstock and the mat for this from brown cardstock. Ink the edges of these white cardstock pieces using red and brown ink (Distress Oxide- Fired Brick, Ground Espresso). Cut a piece of the green patterned paper to fit inside the frame. Cut a slightly smaller piece of the wood grain patterned paper. Adhere these rectangular pieces and the Majestic Frame pieces together. Adhere this to a kraft cardstock card base (5 x 7”). Add gems around the frame.

Stamp and die cut 1 full cardinal image and from another just die cut out the birds. All using dark brown ink (Stampin Up- Early Espresso) onto white cardstock. Ink the edges of the full oval image. Add color to the birds image using Zig Clean Color Markers and a water brush (Orange, Olive Green, Beige, Brown, Mid Brown, Grey Brown, Carmine Red).

Adhere the full image to the ornate oval frame you previously inked. Add the cardinals using foam squares. Adhere this whole piece to the card using foam tape. Add Stickles to the snow on the image and add gems to the oval frame.

Other Products: Canson Watercolor Paper, White Cardstock, Distress Ink (Fired Brick, Pumice Stone, Vintage Photo, Tea Dye, Stormy Sky, Barn Door) Art Extra Snowflake Paste, Die Cut Machine

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: The dimensions of the finished card are 6” x 6”. Cut a piece of cardstock 6” x 12” and score and fold in half. Cover with a piece of the paper collection and set aside.

Stamp the Snowy Cabin in Tuxedo Black Memento Ink onto white cardstock and use the coordinating die to cut the outer ring of pine branches and birds. Color this with various Memento Inks and the Dove Blender Pen. Stamp the image again onto Canson Watercolor paper and using the Distress inks and water brush color the image. Let this dry. Once dry I added the snow and set it aside to dry. Glue the outer ring of pine branches over the water colored piece and allow to dry.

Using the Rounded Window Frame Die cut out a circle decorative piece using the Luxe Gold Cardstock. Glue to the center of the card front. Using the Double Dots adhere the oval Snowy Cabin Piece to the gold center piece. This pops the oval piece up giving it extra dimension.

Using the little heart dies from the Treasured Heart Box Die cut 4 hearts and glue to the corners of the card front.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, copic B02, B00, Y17, G07, G29, E13, R39, R37, R32; Pentart snow crystal pen, Funnel Tray

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Place the decorative Royal Elegance Frames Die over the folded card with one edge slightly over the folded frame and die cut to create the shaped card. Cut single piece using this same die from patterned paper collection and place into card using Designer Dries Clear Adhesive.

Stamp single Cones five times using Festive Pine Cones Cling Stamp Set with Ranger Archival Ink Pad – Sepia on the white cardstock paper. Shadow cones with this same ink. Sponge the cones with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp Cones two times using Festive Pine Cones Cling Stamp Set with Ranger Archival Ink Pad – Sepia on the white cardstock paper. Shadow cones with this same ink and needles with Memento Dye Ink Pad - Bamboo Leaves. Sponge the cones with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

To create flowers, stamp the Christmas Poinsettia & Holly Cling Stamp Set on white paper with Jet Black Archival ink and die cut using the coordinating dies. Colour the poinsettias with StazOn Black Cherry using a sponge dauber. You will need three petals for each flower, using assorted sizes. After colouring, place the flowers and leaves into the mold face down and run through cutting/embossing machine. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter. Pierce the center and glue in some stamens using hot glue gun.

To Create the pine needles, stamp Snowy Pine Village Cling Stamp Set with Ranger Archival Ink Pad – Sepia, and color using Memento Dye Ink Pad - Bamboo Leaves and cut using the coordinating dies. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp twice Snowy Pine Cardinals Die with Ranger Archival Ink Pad - Jet Black on the white cardstock colour with copic pens (B02, B00, Y17, G07, G29, E13, R39, R37, R32). Decorate snow areas with Pentart snow crystal pen

Cut out twice Ornate Ovals Die from one white paper cardstock and one from red paper collection. Cut red in half and glue it under white frame and place into card using Designer Dries Clear Adhesive.

Adhere the cardinals with Darice adhesive foam strips.

Other Products: Ribbon, Fun Foam, Shimmer Additive, Copics: E31, E33, E35, E39, Y00, Y11, Y15, Y23

video For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Card size: 4 3/4 x 6 3/4". Cut 2 pieces of heavy weight white cardstock (Deluxe Flower Shaping Paper is great), one 6 3/4 x 5” and one 7 1/4 x 5”. Score the 7 1/4” piece at 1/2" to use as a tab to glue it to the other white piece. Once glue is completely dry place the outer die of the Decorative Circle Frames onto folded white cardstock and leave the top of die off of the folded edge about 1/4". After card is cut, score one side at the center point again (3 1/4"), this will form the easel. Use the outer die again to cut the card front on another piece of white cardstock. Glue the front to the bottom half (when card is closed) of the 3 1/4" part of the easel matching edges.

Cut 2 Decorative Circle Frames out of gold, flue 1 to the card front and 1 inside card (the inside piece will need to be trimmed at the top to fit). Cut 2 white eyelet circles and then cut 2 circles smaller to fit inside eyelet circles from decorative paper (the inside circle was cut from a panel that has the 2 chickadee type birds in a pine wreath, do the “out of the box” cut to make sure you keep the bird tails intact. Glue eyelet circle and decorative paper circles to the front and inside of card.

Stamp the large pinecone and 2 medium pinecones using black ink, die cut and color. Use foam tape on some of the pinecone scales to make the pinecone more dimensional and glue on the other parts then adhere to front of card at the top. Cut 2 medium pinecones from Fun Foam and glue them to the backs of the 2 colored pinecones. Stamp Merry Christmas using Red, die cut it and die cut a Merry Christmas from Fun Foam as well, glue them together. These inside pieces need to be dimensional to act as a “stay” for the front part of the easel. Glue the Merry Christmas to the inside where you want the card to stay open (check first or it may be too high or too low). Glue the pinecones under the Merry Christmas. < /p>

Stamp the poinsettias with Vermillion, sponge with Carnation and stamp the leaves with Fern Green, sponge with Leaf Green, die cut then shape in the mold. Glue flowers in sets of 2 then fill centers with gold Prills. Stamp a sentiment on a small tag from the decorative paper using red then die cut. Add a sheer red bow to the top of tag. Glue 3 flowers between Merry Christmas and pinecones, also inserting tag as desired. Glue 1 flower on the front toward the bottom left, add another sheer red bow under the flower. Add holly leaves where desired.

Glitter the flowers with Crystal clear, glitter the edges of card front and inside with Crystal Ultrafine. Glitter the decorative paper circle on the front randomly. Use shimmer on leaves by brushing it on.

Other Products: Die cutting machine Cut’n’boss, heatgun, cheesecloth, sewing thread, water mister, hot glue gun, hot glue, scissors, Steadtler watercolor pencil, Funnel Tray

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Use the HCCB1-480 6" x 6" Shutter Fold Card – White base. From the #9A paper from the collection, cut a 6 x 6 square and glue it inside the card. From the 4A paper, cut a sentiment. Cut a red piece of paper (#11B) a little bit larger to put under. Glue it in the middle of the card base.

Cut out 2 circles from the HCD1-7272 Rounded Sunlight Window Die collection, (one in 11B red paper and one in 12B dark paper) and cut them in half to fit the base. Glue to the base (Green outside and red inside). Cut two semicircles from the set HCD1-7273 Rounded Eyelet Window Die from #8B paper and glue it on the red semicircle. Cut two semicircles from the set HCD1-7274 Rounded Lattice Window Die from Luxe Gold Cardstock and glue it on the green semicircle.

Cut HCD1-7271 Rounded Windows Frame Die from the Luxe Gold Cardstock. With the larger die in the Eyelet Circle & Basic Small, cut a pattern paper from the #2A paper and glue it on the gold one.

Stamp a Pine Cone from the Festive Pines Cones Cling Stamp with the archival ink Jet Black. Color with Steadtler watercolor pencil and Zig markers. Put 3D lacquer on it and let it dry. Put cheesecloth and sewing thread on the top of the circle and glue the pinecone on the circle with 3D foam to give dimension.

Make a little fashionista flower in red. Stamp using vermillion ink onto flower shaping paper, colour the petals with the same color and diecut with the coordinate die. Place facedown into the flower shaping mold, spritz with water and run through the diecutting machine to shape. When dry, give futher shape with Deluxe flower shaping kit tools. Poke a hole in the centre of the flower and add stamens, secure with hot glue. Glue it at the left of you pinecone.

Cut out one sentiment from the #4A paper. Glue it on the card at the right. Finish by adding some redberries. Glue the gold circle on the left front part of the card, as pictured.

Other Products: Score Board, Die Cutting Machine, White Color Twine, Sharp Scissors, Smooth White Cardstock, Adhesive that dries clear, Double-sided tapes, Funnel Tray, Heat Tool.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: The ready top fold card from white card stock measures 7 1/2″ by 5 1/4″. To prepare the card base, cut a smooth white cardstock measuring 7 1/2″ by 10 1/2″. Score the longer side at 5 1/4″. Crease and fold the card neatly. Choose the paper from the designer paper collection and create the first mat, a little smaller to the card base. Distress all the sides using sharp scissors.

Cut 2 die cuts from white cardstock using Elaborate Oval Frames Die and 2 die cuts from Intricate Swirl Frames Die. Stack them together for extra strength. Keep the Elaborate Oval Frame, white, and color the Intricate Swirl Frame with Leaf Green Archival Ink. Layer both the frames on the card front to create the focal point for the card.

Stamp image from Snowy Pines Cabin Cling Stamp Set, on white cardstock, using black archival ink and color it using Zig markers, Next cut the painted image using its coordinating die. Layer them as shown. To add snowy effects, use adhesive that dries white and sprinkle Rajni Chawla's Frosting Powder.

For Poinsettias, stamp the florals from Candlelit Poinsettia Cling Stamp Set, using Archival Ink Plum, and leaves using Olive Green. Cut them using their coordinating dies. Color the flowers using Red Geranium and leaves using Leaf Green. Mist them with water and shape them using Deluxe Flower Shaping Kit. Add prills to the centers.

Once all the elements are ready, assemble the card as shown. Stamp the sentiment from Candlelit Poinsettia Cling Stamp Set using Black Cherry ink pad and finish the card. Add Rajni Chawla's frosting powder for extra interest.

Other Products: Gesso, watercolour paints,

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Using the largest die from the HCD2-7309 Elaborate Oval Frames Die set, cut the paper base from the white paper (see the video in the description). From the same white paper die cut out one element, cover it with glue and glitter and glue it to the base. From the same set of cutting dies, cut a slightly smaller paper frame from the collection and glue it to the base. Then, from the white paper, cut the largest frame from the sets HCD1-7305 Ornate Ovals Die, cover it with glue and sprinkle with brocade, glue to the base.

Stamp images from the HCPC-7917 Festive Pine Cones. Colour with watercolour paints and die cut using the coordinating die.

To create flowers, stamp the poinsettias from Christmas Poinsettia & Holly stamp set on the paper Collection a few times using Ranger Archival Ink Pad – Carnation Red, then die cut using the coordinating dies and shape using the Christmas Poinsettia 3D Shaping Mold. Layer the petals together using the hot glue gun making sure to offset them. Add glue to the centers and add Ribbit Prills. To create leaves, stamp the holly from Christmas Poinsettia & Holly stamp set on Deluxe Flower Shaping Paper using Ranger Archival Ink Pad - Leaf Green and cut with the coordinating die. Shape leaves using 3D Christmas Poinsettia Mold. Cover the flowers and leaves with glue and cover them with Rajni Chawla's Crystal Clear.

Cut a strip from the paper collection and stamp the sentiment Season’s Greetings on it from the HCPC-3884 Candy Cane Cottage Cling Stamp Set. Arrange everything as pictured. Cover everything gently with white gesso and Rajni Chawla's Crystal Clear.

Other Products: Score Board, Die Cutting Machine, Cuttle Bug Embossing Folder, Scissors, Smooth White Cardstock, Double-sided tapes, Funnel Tray, Heat Tool, White embossing powder, Versamark Embossing Ink, Texture Paste, Glitter Dust, Pearl String, Golden micro beads, Marron Ribbon.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: The ready top fold card from white card stock measures 7 5/8″ by 5 3/4″. To prepare the card base, cut a smooth white cardstock measuring 7 5/8″ by 11 1/2″. Score the longer side at 5 3/4″. Crease and fold the card neatly. Cut panel from white card measuring 7 1/8 by 5 1/4” and embossed it using embossing folder. Adhere this panel on card base using foam tape. Adhere pearl string around this panel as shown, using clear glue.

Nex,t using HCD2-7309 Elaborate Oval Frames Die, cut 2 die cuts, one from white and one from gold Luxe cardstock. Glue both the die-cuts together to add some extra strength. Stamp 2 images from Snowy Pines Cabin Cling Stamp set on white cardstock, 1 image with Coffee Ink one with Leaf Green Ink. Color the image using Zig Markers, Next cut the painted images using its coordinating dies. Cut the shadow die on white card, color it using tumble glass ink. Layer them as shown using clear glue and foam tape. Add snowy effect using texture paste and sprinkle some glitter dust.

Stamp Festive Pine Cones Cling Stamp Set using Leaf green ink, color it using Vivid Chartreuse Ink and cut it using coordinating die.

For Poinsettias, stamp the florals from Christmas Poinsettia & Holly Cling Stamp Set, using Embossing Ink, cover with white embossing powder and heat it using heat tool. Cut them using their coordinating dies. Color the flowers using Vermillion Ink Shape it using shaping mold and make few flowers using Deluxe Flower Shaping Kit. Add prills to the centers. Add glitter dust.

Add golden micro beads on rose hip stamen using clear glue, add maroon ribbon on the left side of the card.

Once all the elements are ready, assemble the card as shown. Stamp the sentiment from Thank You Sentiments Cling Stamp Set with green ink and finish the card.

Other Products: Small Foam Dots; Prismacolor pencils; Wink of Stella Clear; Die cut machine

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Prepare a 5 x 7” white card base, layer a piece of the Snowy Pines paper (page 2B) on top after inking the edges with the Bamboo Green ink. Stamp the Snowy Pines Cabin twice on the Flower Shaping paper with the Northern Pines ink. Color both alike with the pencils, die cut with the coordinating die, cut the second one with the inside die. Adhere the first one on the card base, add foam dots to the second one and adhere on top of the first one. Stamp the pine cones, color and cut out. Add foam dots to the back and adhere to the card.

Stamp the flowers with the Lady Bug ink, lightly color in, cut out, ink the edges with the same ink, place in the mold and shape, add stamens. Stamp the leaves with the Bamboo ink, cut out, place in the mold, shape and add to the card. Stamp the sentiment, cut out, adhere to the bottom of the card.

To finish, add adhesive, glitter and Wink of Stella.

Other Products: Memento London Fog Ink, Stampin’ Up Seaside Spray Cardstock, Watercolor Paper, Glue Gun, Dimension Dots, Dimensional Tape, Marvy Snow Marker, White Cardstock, Shimmer Spritz – Sparkle, Stampin’ Up Real Red Ink Pad, Wink of Stella – Clear

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Card size is 6 x 6”. Score and fold 12 x 6” white cardstock at 6” on the long side to create top fold card base. Trim 6 x 6” green panel from Snowy Pines Paper Collection sheet 9A to 5 3/4 x 5 3/4” and ink the edges with Archival Olive ink. Cut red designer paper, sheet 11B, to 5 1/2 x 5 1/2” and ink the edges with Real Red ink. Adhere the two together with dries clear adhesive and adhere to card base using dimensional tape. Cut red designer paper from sheet 11B to 5 7/8 x 5 7/8”, ink the edges with Real Red ink and adhere to inside of card. Cut ‘Believe in the magic of Christmas’ panel from sheet 4A, ink the edges with Archival Olive ink, adhere to a white mat layer cut to 3 1/2 x 4 1/2” and adhere to the inside of the card.

Stamp the image from the Snowy Pines Cabin Cling Stamp Set on watercolor paper using Memento London Fog ink 2x. Color only the outside image using zig markers, Mid green, Mid Brown, Gray and Orange markers. Diecut using the outside and inside dies from the Snowy Pines Cabin Die. Spray with Shimmer Spritz – Sparkle. Color the cabin, trees, birds, fence and mailbox on the second image using Zig markers Mid Brown, Mid Green, Carmine Red and Gray. Brush images with Wink of Stella – Clear. Diecut using the outer Snowy Pines Cabin die and the landscape die from the same set. Diecut the outer die again from Seaside Spray cardstock. Lightly sponge the Seaside Spray diecut with ColorBox Frost White ink.

Add snow to the cabin images and the blue background diecut using the Marvy Snow Marker, sprinkle with Rajni Chawla’s frosting powder and heat set using the Heat It Craft Tool. Add dimensionals to the backs of the cabins and trees then adhere all the layers together using dries clear adhesive. Adhere to the card front using dimensional tape.

Cut the ‘Merry Christmas’ from the paper collection sheet 4A, ink the edges with Archival Olive ink, back with white cardstock cut to the same size and adhere to the top center of the card front using dimensional foam tape.

Other Products: White cardstock, acetate sheet, flower prills.

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Create a card base of size 6" by 7" and cover it with pattern papers from the Snowy Pines paper collection. Cut the oval center on the card front using the second largest die from the ornate ovals die set. Cut the decorative oval frame by aligning the two oval dies from the ornate oval die set with luxe gold cardstock. Glue the oval frame over the oval window on the card front.

Stamp the images from the Festive Pine Cones Cling Stamp Set with archival black ink pad. Color the images with coloring markers and cut then using their coordinating dies. Stamp the flowers Christmas Poinsettia & Holly Cling Stamp Set with archival geranium red and color with archival geranium red and plum. Stamp the leaves from the Christmas Poinsettia & Holly Cling Stamp Set with archival library green and color with memento bamboo leaves. Shape the flowers and leaves using the 3D shaping mold. Add the frosting powder to the card, flowers and stamped images to give a frosty look.

Arrange everything as shown.

Other Products: Hot glue, hot glue gun, clear water droplets, scissors, paper trimmer, die cutting machine, funnel tray

For more ideas on creating with the 5 x 7 Decorative Frame Dies, watch the tutorial at https://youtu.be/qdBFA5VpmSo.

Instructions: Take white cardstock size 12”x 6” and fold in half and final size is 6”x 6” (tent fold card). Take pattern paper size 5.875” x 5.875” from Snowy Pines Paper Collection HCDP1-2117, tear edges and adhere on card base. Take white cardstock and cut one largest Ornate Oval Die HCD1-7305 and another same die on red pattern paper from the Snowy Pines Paper Collection HCDP1-2117. Adhere these two diecuts using Designer Dries Clear Adhesive and adhere on card base using foam tape. Cut 6 small intricate Ornate Oval Die HCD1-7305 on white cardstock and color them using Carnation Red ink and Cosmic Brown Nuvo Mousse. Cut 6 Royal Elegance Frames Die HCD2-7307 on white cardstock and attach them on Ornate frames die, as seen pictured. Assemble them.

Stamp two images from Snowy Pine Cardinals Cling Stamp Set HCPC-3918 on white cardstock using Jet Black ink. Stamp pine images from Festive Pine Cones Cling Stamp Set HCPC-3917 on white cardstock using jet black ink.

Color cardinal stamp image using Zig Clean Color Real Brush Markers –N0053 Yellow green, No-041 Light Green, No-044 deep green, No-067 Mustard, No-020 Red. Color pine image using Zig Clean Color Real Brush Markers- No-067 Mustard. Shape pines image using Deluxe Flower Shaping Kit. Assemble cardinal and pines images as seen on picture using foam tape and glue gun. Dab some Dries Clear glue onto a sponge, apply over colored image and pattern paper, sprinkle with Embossing Enamel –Aged Ivory. Heat them using Heating Tool. Add a few clear water droplets.

Cut one smallest Arrow and Banner HCD1-7204 on white cardstock and cut pointed edge with scissor and add sentiment from Candy Cane Cottage Cling Stamp Set using Jet Black Ink. Adhere it on left top edge of the card using foam tape.

Other Products: Iris cardstock, white cardstock, heavy cardboard, Versafine Black Onyx ink

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: Cut a piece of white cardstock 12” x 6”, score at 6” on the long side and fold to create a base card 6” x 6”. Cut a piece of gold cardstock 6” x 6” and adhere to the front of the card. Cut a 6” x 6” panel from the patterned paper and trim to 5 7/8” x 6 7/8”. Using the third size plain edge rectangle die from the HCD2-7189 Eyelet Rectangles & Basic Die set, die cut the aperture out of the middle of the paper on an angle. Die cut the eyelet frame using the larger eyelet rectangle die and the plain edge die and then adhere to the aperture as shown. Add to the front of the card using two layers of heavy cardboard.

Stamp two medium size pine cones and several small pine cone images from the HCPC-3917 Festive Pine Cones Stamp set in Back Onyx ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Shape and add the two larger pine cones to the top right of the rectangle with foam squares. Add the smaller pine cones around the larger pine cones with foam tape as shown.

Stamp the poinsettia images from the HCPC-3881 Christmas Poinsettia & Holly Stamp set in Vermillion ink on Deluxe Flower Shaping paper. Colour the centres with Vermillion ink and die cut with the coordinating dies. Assemble with two of the same size and add Frosting Powder using Dries Clear glue on a damp sponge. Add Heart of Gold Prills to the centres of the flowers and adhere to the top left over the pine cones and the bottom right of the rectangle.

Stamp the holly leaf images from the HCPC-3881 Christmas Poinsettia & Holly Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Vivid Chartreuse and Fern Green inks and die cut with the coordinating dies. Add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere around the poinsettias as shown.

Add small pine cones around the poinsettias and holly with foam tape.

Add Crystal Clear glitter to the red stamens, trim and adhere as shown around the poinsettias, holly and pine cones.

Inside card – cut a 6” x 6” coordinating panel out of the paper collection and trim to 5 7/8” x 5 7/8” and adhere to the inside of the card with a piece of heavy cardboard 5 3/4" x 5 3/4".

Other Products: Watercolor paint, glue, white paint, glitter, 3d squares, brush

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Cut a shaped 5 x 7” card base from Deluxe Flower paper using the outer Elaborate Oval Frames die. Cut out the decorative die elements from the pale green paper of the Snowy Pines paper collection. Layer to the base with glue. Cut out the decorative die elements from the white cardstock using the outer Ornate Oval die. Layer to the base with glue. Stamp snowy pine cardinals and festive pine cones image using black ink. Die cut with the coordinating die. Paint with watercolor paints. Create layers.

Apply a little transparent glue to selected places and sprinkle with glitter.

Other Products: Smooth white cardstock, flat back pearl, Satin ribbon, versamark, Orange blossom archival ink, dimensional tape

For more tips on creating with Candlelit Christmas Collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

For more ideas on creating with Decorative Royale Square & Circles Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

Instructions: Ready Shutter card measures 6"x 6". Take a piece of white cardstock measuring 12" x 6". Score on 3"and 9" from longer side. For card mats choose a paper from designer paper collection and cut two pieces measuring 5 7/8" x 5 7/8" and four pieces measures 5 7/8" x 2 7/8". Distress the edges of all mats and adhere on card base. Cut a sentiment card from designer paper collection and mat it inside the card base. Further, take a piece of white cardstock measuring 7" x 4.5". Score at half inch and 6.5" from longer side. Cut a mat from designer paper measuring 5 7/8" x 4 1/2”. Distress the edges and mat it on white cardstock. Cut an oval window using oval die from Royale Elegance Frames Die. Cut a frame from Luxe Gold cardstock using Royale Elegance Frames die. Glue it on the window. Apply glue on scored tabs and glue it inside the card as shown.

For shutter, cut two pieces of designer paper measures 3" x 5 3/4". Score on half inch from longer side on both pieces. Cut a decorative window using decorative die on both pieces of designer paper and two rectangle pieces of Luxe gold cardstock using base die from Eyelet Royale die. Glue gold cardstock diecut from the back side of designer paper. Arrange shutters, apply glue on scored tabs and glue them with side panels.

Stamp Holly Poinsettia flowers on Deluxe flower Shaping Paper using vermilion ink and leaves using library green ink. Cut images with coordinating dies. Paint flowers using orange blossom ink and vermillion ink and leaves using leaf green and library green ink. Shape flowers and leaves using shaping mold. Layer flowers and glue them. For center of the flowers I use gold mini micro pearls. Arrange flowers and leaves and adhere using hot glue. Apply Indian Gold Mousse on flowers and leaves.

Stamp sentiment on designer paper strip using versamark and heat emboss using gold embossing powder. Also take a strip of Luxe gold cardstock. Cut both strips into two. Cut flag shape on both ends and glue it on card as pictured.

Other Products: smooth white cardstock, dimensional tape, watercolor paper

For more tips on creating with the Snowy Pines Collection watch the tutorial at https://youtu.be/nVtKVcgg530.

Instructions: Ready tent fold card measures 7" × 7". First cut a piece of designer paper measuring 6 7/8” × 6 7/8" and mat it on ready card base. Take another piece of designer paper measuring 3 1/4" × 6 1/2" and a piece of white cardstock of same size. Score lines on white cardstock using scoreboard to create texture. Now mat both (designer paper and white cardstock) pieces on a piece of white cardstock which is 1/8 of an inch bigger from all four sides. Adhere it on card using dimensional tape. Cut a strip of Luxe Gold cardstock measuring 1" × 6 3/4" and glue it on the center of the card.

Stamp images from Snowy Pines Cabin stamp and Festive Pine Cones stamp on water color paper using black archival. Paint images using zig markers and cut with coordinating dies. Cut a decorative piece from white cardstock using Ornate Ovals die, glue it on the gold strip and arrange Snowy Pine Cabin image on it. Trim pine image, apply Crystal Lacquer on ribbon part and arrange it on both sides of cabin image as shown. Glue 2 small pine images on top left corner of card. Cut sentiment from Luxe Gold cardstock using Silent Night Scroll die. Cut 2 more pieces from white cardstock and glue all on bottom left corner of card. For finished look, apply Frosting Powder on images using Designer Dries white adhesive.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Ranger Distress Ink pads - Peeled Paint, Seedless Preserves,

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

For more ideas on creating with the Decorative Royale Square & Circle Dies, watch the tutorial at https://youtu.be/tqmtn_TiVVw.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

Instructions: Card measures - 6 inches by 6 inches. To create card base - cut out a 6” x 12” piece of white card and score it at 6” (long side up). Fold using a bone folder along the score lines. Cut out one 6” x 6” piece of Paper Collection, then die cut using Eyelet Royale Die and adhere the final piece to the card front. Die cut two decorative pieces of the Rounded Lattice Window Die from Luxe Gold Card and adhere them to the card front as shown. Die cut two decorative elements of the Rounded Scallop Window Die from Paper Collection, then adhere additional layer of Paper collection on the back and adhere final pieces to the card front using 3D foam.

Stamp the leaf images from Leafy Accents Cling Stamp Set with Seedless preserves Distress ink and colour them in with Peeled Paint Distress ink using daubers. Die cut leaves with matching Leafy Accents Die, shape them using 3D Leafy Accents Shaping Mold and adhere them to the card front as shown.

Stamp the flower images from Oakberry Lane Blossoms Cling Stamp Set with Vermillon Archival Ink and colour them in with Vibrant Fuschia and Majestic Violet Archival Inks using Daubers. Die cut flowers using matching die from Oakberry Lane Blossoms Die set and shape them with 3D Blossoms Shaping Mold.

Assemble Oakberry Lane Blossom petals using a hot glue gun and decorate flower centres with stamens. Using a sponge, add Designer Dries Clear Adhesive to the flower petals and leaves, sprinkle them with Rajni Chawla's Crystal Clear Glitter, then adhere flowers to the card front as shown.

Other Products: Die Cutting machine, Trimmer or Guillotine, Scoreboard, Scissors, Bone folder, White cardstock, Ranger Distress Ink pads - Peeled Paint, Faded Jeans

For more tips on creating with the Wild Aster Collection watch the tutorial at https://youtu.be/1mriCKqh-Ac.

Instructions: Tent card measures - 6 inches by 6 inches. To create 6” x 6” card base - cut out a 6” x 12” piece of white cardstock and score it at 6” (long side up), then cut out 6 x 3” piece of white cardstock and score it at 1/2”,1 1/2” and 2 1/2” (short side up). Fold using a bone folder along the score lines, then adhere both pieces together to create card base. Cut out one 5 7/8” x 5 7/8” piece of Paper Collection and adhere it to the card front. Cut out one 5 3/4” x 5 3/4” piece of Deluxe Flower Shaping Paper and create watercolour wash with Faded Jeans Distress ink using watercolour brush. Then distress the edges with Faded Jeans Distress ink and adhere to the card front. Die cut two decorative elements from White card using Swirly Accent Spray Die, distress them with Faded Jeans Distress ink, then offset and adhere additional decorated elements on the back. Adhere final piece to the card front. Cut out one 1 3/8” x 5 3/4” piece of White card and one 1 1/4” x 5 3/4” piece of Paper Collection, stock, adhere them together and then adhere the final piece to the card front using 3D foam. Stamp the sentiment from Celebrate Love Sentiments Stamp Set with Faded Jeans Distress Ink, die cut it using Arrows and Banner Die and then distress the edges with Faded Jeans Distress ink. Shape using fingers and adhere the final piece to the card front as shown.

Stamp flower images from Wild Aster Cling Stamp Set with Faded Jeans Distress Ink and colour them in the same Faded Jeans Distress using daubers. Stamp and colour in the leaves from Wild Aster Cling Stamp Set with Peeled Paint Distress using daubers. Die cut leaves and flowers using matching Wild Aster Die, shape them using Deluxe Flower Shaping Kit. Assemble flowers and stamens using a hot glue gun and adhere them to the card front as shown. Fill in the composition with leaves.