Instructions:

Cut Deluxe Flower Shaping paper to 10 x 7", score and fold at 5" to create card base. Cut a 6 13/16 x 4 1/4" size panel from blue sheet 3A of the Decorative Dragonfly Paper Collection. Lightly Sponge the edges of panel with Manganese Blue ink and attach directly onto card base. Using from the HCD2-7399 Flourish Companion Frame Die, diecut the 2nd largest frame base from Deluxe Flower Shaping cardstock. Next diecut the coordinating size frame from Luxe Gold cardstock. Attach the gold frame onto white frame base. Stamp the ‘Heartfelt Thanks’ sentiment in the bottom right corner in a two tone ink of Majestic Violet and Manganese Blue ink. Attach the framed base onto card using dimensional adhesive.

Stamp the following images onto Flower Shaping cardstock and diecut with coordinating dies. Stamp large dragonfly from HCPC-3985 Dragonfly Florals Cling Stamp Set in a three tone combination of Manganese Blue, Majestic Violet and Paradise Teal ink. Stamp the medium dragonfly shown from HCPC-3983 Decorative Dragonfly Cling Stamp Set with the same inks. Stamp two of the seeded florals (shown on top left of card) from HCPC-3984 Daydream Florals Cling Stamp Set using a Leaf Green on leaves/stems and then Paradise Teal and Cactus Flower on the floral. For the other upright floral, use a Leaf Green on leaves/stems and then Majestic Violet and Cactus Flower on the floral. Stamp the small drooping floral from HCPC-3985 Dragonfly Florals Cling Stamp Set in Leaf Green for the leaves/stem and Manganese Blue for the florals.

Sponge the dragonflies and flowers with the following inks. For the largest dragonfly, use the Paradise Teal in the center. Sponge the inner half of wings with Cactus Flower ink & Majestic Violet ink. Sponge the outer wings with Paradise Teal ink. Repeat for the medium dragonfly. Sponge the leaves/stems with Leaf Green ink with a touch of Olive ink. Use Cactus Flower, Majestic Violet and Paradise Teal on the florals. Use Paradise Teal on the drooping florals.

Use the shaping stylus from Deluxe Flower Shaping kit to shape the dragonflies and florals. Attach the dragonflies onto card. Cut apart some of the florals as shown and attach onto card using glue and dimensional adhesive. Lastly, add some more sparkle over the dragonflies and florals using Dries Clear glue along with the Crystal glitter.

Other Products: Dimensional Adhesive, Funnel Tray, Scissors, Paper Trimmer, Diecutting Machine

Instructions:

The ready side fold card measures, 5 1/2” by 8”. Cut a panel from the pattern paper collection 1/4” smaller on all four sides. Glue the panel on white cardstock creating a sleek border of 1/16″ on all the sides. Layer the panel on the ready card base using double-sided tapes for extra dimensions. Cut a decorative gate in white using Teardrop Lattice Gateway Die.  Glue a golden die-cut, behind the white one to create little shadows. Cut a centerpiece using the same die from Luxe gold cardstock and glue it flat.

Stamp the required images from HCPC-3985 Dragonfly Florals Cling Stamp Set using black archival ink on smooth white cardstock and paint them using Zig Clean Color Real Brush Markers. Cut the painted images using their coordinating dies. 

Cut the tag using Album Tags and Accents Die set from Decorative Dragon Paper Collection and mat a white fancy tag behind it. Adhere a white die cut with the sentiment using Ornamental Tags Die on top. 

Stamp the florals with Magenta Hue Archival ink on flower-making paper using Clematis Cling Stamp Set. Cut the florals using its coordinating die set and color the flowers using the same ink. Color the centers with leaf green. Color the back sides of the petals as well. Spritz water and shape the flowers using golf groove tools. Prepare 3 medium-sized flowers. For the flower centers, put a blob of glossy accent and drop in a few green color flower seeds. Stamp 3 leafy vines using Olive Green archival ink on Deluxe Flower Shaping Paper, color them using Leaf Green, and cut them using its coordinating die. Shape them using golf groove tools.   

Cascading Wisterias are first stamped with Cactus Flower Archival ink, cut with its coordinating die, and then colored using the same ink. Once all colored these are shaped using Deluxe Flower Shaping Kit and add glitter balls to the centers.

Once all the elements are ready, assemble a small floral bouquet as shown and glitter the flowers with Rajni Chawla's Crystal Clear Powder. 

Other Products: Die Cutting Machine, Score Board, Bone Folder, Smooth White Cardstock, Scissors, Heat gun, Glossy Accent

Instructions:

Make the base for the card. Cut deluxe flower shaping paper to size 7 1/2" x 5” and another piece 7” x 5”. Score the bigger piece at 1/2” on the longer side. Fold and adhere the second piece to create a 7” x 5” card base.

Cut white card stock using the inner decorative die of the Fancy Classic Oval Frame die. Adhere this on the card front. Cut a piece of light purple background from the paper collection using the outer outline edge die from the same set and adhere to the card front.

Using the inner outline die from the Fancy Classic oval frame die, cut from the a deeper shade of purple from the paper collection. Adhere this on the card front.Cut two pieces from the inner decorative die of the Fancy Classic Oval Frame die using the white card stock and the luxe gold card stock. Adhere the two pieces together and adhere to the card front.

Cut an oval frame using the eyelet oval die from the luxe gold and white card stock and adhere on the card front.

Stamp the florals from the Dragonfly florals stamp set using Jet black archival ink on deluxe flower shaping paper and color with Zig markers. Cut the images using matching die.

Stamp the flower images from small wild rose stamp set on Deluxe flower shaping paper with Vibrant Fuschia Archival ink. Color with pink peony and vibrant fuschia ink. Cut the flowers using the matching die. Shape the flowers in 3D flower shaping mold. Layer the flowers together and add prills in the centre.

Make filler flowers using the Wisteria stamp and die. Make the leaves using the Large floral urn stamp and die set using green archival inks.

Arrange the stamped images and flowers and leaves on the card using hot glue.

Stamp the dragonfly in Jet black ink and color with zig markers. Cut with matching die. Add the dragonfly on the card.

Add a sentiment from the Celebrate Love Sentiments stamp set on vellum.

Other Products: Scoring board, die cutting machine, hot glue gun, Archival Library Green ink

Instructions:

Card size: 5 X 6 7/8”. Start with a white card base that measures 5 x 7” with fold at the top. Place outer die of the Filigree Companion Frame Die hanging over fold by about 1/4" (this is so that fold will not be cut away). Cut another front from white with the same die and then cut one from decorative paper. Glue together matching edges at bottom and sides.

Cut the decorative frame using the Filigree Companion Frame set from white and from silver, off-set slightly when gluing together then glue to card front. (The inner decorative dies and corners were not used on this card.)

Stamp round sentiment using Cactus Flower then stamp the Let’s Celebrate You inside the circle, die cut using the circle that best fits, sponge the edges with Cactus Flower, pop up with foam.

Stamp dragonfly 3 times on vellum using embossing ink then heat emboss with silver embossing powder. Die cut then color the backs with inks and sponges. Glitter the top layer after gluing all 3 together at the body. Add a little white gel pen to bring a little definition to the eyes and black marker as well if desired.

Stamp several wildflower groups from the 2 stamp sets, Daydream Florals and Dragonfly Florals, die cut and color with Copic Markers (or favorite coloring system).

Glue and pop-up florals in left bottom corner inside silver and white frame then glue body of dragonfly and pop-up head to be on top of flowers. Leave wings free. Add popped up circle sentiment to card front at right bottom corner (if you haven’t already done that).

Glitter card and flowers, avoid silver mirror paper if possible.

Other Products: White cardstock, London Fog Ink, Foam Sheet, white gel pen, silver embossing powder, embossing ink, Copic Markers: YG03, YG17, B01, B02, B00, V01, V12, V15, Y15

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 12” x 6 1/4", score at 6” along the long side and fold. Die cut the base shaped card using the No.1 die from the HCD1-7367 Simple Centerpiece Die slightly over the folded edge. Die cut the aperture from the front of the card using the No.7 die from the HCD1-7367 Simple Centerpiece Die.

Inside back of card: Die cut the green pattern paper out using the No.1 die from the HCD1-7367 Simple Centerpiece Die and adhere to the inside of the card and trim the edge over the fold to allow the card to fold easily. Die cut the pattern paper out using the No. 6 die from the HCD1-7367 Simple Centerpiece Die and adhere to the inside using the front aperture as a guide.

Stamp the sentiment from the HCPC-3975 Oval Floral Frame Cling Stamp set in Deep Purple ink on Deluxe Flower Shaping Paper and die cut with the coordinating die. Die cut another die out of Deluxe Flower Shaping Paper and adhere to the back of the stamped image. Adhere to the centre of the pattern paper as shown.

Die cut a frame out of silver cardstock using the No. 6 and No. 7 dies from the HCD1-7367 Simple Centerpiece Die and adhere around the pattern paper.

Card Front: Die cut a piece of clear acetate out using the No.3 die from the HCD1-7367 Simple Centerpiece Die and adhere over the aperture on the front of the card. Die cut the purple pattern paper twice out using the No.1 and No. 7 die from the HCD1-7367 Simple Centerpiece Die. Adhere one to the front of the card over the clear acetate.

Die cut a frame out of Deluxe Flower Shaping Paper using the No. 1 and No. 7 die from the HCD1-7367 Simple Centerpiece Die. Die cut another piece of clear acetate using the No. 3 die and adhere to this frame. Adhere the remaining purple frame to the white frame over the clear acetate.

Die cut the decorative centerpiece die out of Deluxe Flower Shaping Paper using the No.1 from the HCD1-7369 Elegant Hearts Centerpiece Die and the No. 7 die from the HCD1-7367 Simple Centerpiece Die. Adhere to the front of the purple frame.

Die cut a frame out of silver cardstock using the No. 6 and No. 7 dies from the HCD1-7367 Simple Centerpiece Die and to the inner frame.

Add iridescent clear sequins, small water droplets and Crystal clear glitter to the card front in the centre of the card front and adhere the purple frame to the front of the card with foam tape ensuring there are no gaps around the aperture to create the shaker element.

Stamp the flower images from the HCPC-3985 Dragonfly Florals Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Add Crystal Ultrafine glitter to the flowers with Dries Clear glue and adhere two flowers to the right of the aperture as shown.

Stamp the small dragonfly image from the HCPC-3983 Decorative Dragonfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Add Crystal Ultrafine glitter to the wings and adhere to centre of the card over the clear acetate window as shown.

Stamp the large dragonfly image from the HCPC-3983 Decorative Dragonfly Cling Stamp Set in Jet Black ink on Iris cardstock. Colour with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Add Crystal Ultrafine glitter to the wing accents with Dries Clear glue. Adhere the dragonfly to the bottom right of the card as shown with foam squares on the wings.

To finish the front add iridescent gems to the dragonfly bodies and on points on the decorative die.

Inside Front of Card: Die cut a frame out of green pattern paper using the No.1 and No. 7 die from the HCD1-7367 Simple Centerpiece Die. Adhere to the inside front of the card and trim the edge over the fold to enable to the card to fold easily.

Die cut a frame out of silver cardstock using the No. 6 and No. 7 dies from the HCD1-7367 Simple Centerpiece Die and to the inner frame.

Other Products: Iris cardstock, foam squares, clear iridescent sequins, iridescent gems, small water droplets, foam squares

Instructions:

Prepare a 5 1/2 x 7 1/2” card base using the Flower Shaping Paper. Cut a 5 1/4 x 7 1/4” piece of Decorative Dragonfly Paper (sheet 4A) and ink the edges with Bamboo Leaves ink. Add foam dots to the back and adhere to the card base.

Stamp some of the flowers from the Daydream Florals set with black ink on white card stock. Color with Zig markers, die cut out using the coordinating die, shape using the Flower Shaping Kit. Add small foam dots to the back of a few flowers and adhere to the card on the left side.

Stamp 2 of the Decorative Dragonflies on white card stock with Black ink, color using the Zig Markers, cut out with the coordinating die, and adhere to the card on top of the flowers.

To finish, add glitter to the flowers and Dragonflies.

Other Products: Paper trimmer, Die cut machine, small foam dots,

Instructions:

Other Products: Smooth White Cardstock, Watercolor Paper, Satin Cord

Instructions:

My finished card is 5" x 7". Make card base out of Deluxe Flower Shaping Paper. The weight of this is perfect for making cards. Cover the card base with a piece of Sheet 5A of the paper collection.

Cut two of the Regal Lattice Gateway Die; one out of white cardstock and one out of the Luxe Gold cardstock. Offset the two with the gold beneath the white and glue together. Glue to the card front.

Stamp the flowers using Jet Black Archival ink and emboss using clear embossing powder onto Canson watercolor paper. Use the water pen and the Zig markers to color the flowers then cut out using coordinating dies. Allow to dry and then add glitter. Glue to the bottom of the card front and allow to dry.

Stamp the dragonfly twice using black ink and emboss with Midnight Teal embossing powder. Color with Magenta Hue and Danube Blue ink. Cut out using coordinating die and glue the two dragonflies together pulling up on the wings of the top dragonfly to make it look like it is in flight. Decide on placement and glue to the top of the card.

Other Products: Die Cut Machine, VersaMark Ink, Clear Embossing Powder, Midnight Teal Embossing Powder, Canson Watercolor Paper

Instructions:

Fold 6.5 x 13" white cardstock to 6.5" with fold on the top then use the outline die from the Simply Elegant Centerpiece Die to cut, leaving the top of the die over-hanging fold by about 1/4". Cut out a green cutout with the same die from the Decorative Dragonfly Paper Collection. Cut out a white and a silver frame with the Elegant Centerpiece Frame Die from the Simply Elegant Centerpiece Die set. Adhere all elements as pictured.

Stamp a Dragonfly from the Decorative Dragonfly Stamp Set in Tuxedo Black. Stamp some branches from the Dragonfly Florals Cling Stamp Set and Daydream Florals Cling Stamp Set in Tuxedo Black and Fern Green inks, color them with inks and promarkers and diecut with coordinating dies.

Stamp blossoms from Sweet Pea Cling Stamp Set in Cactus Flower ink onto Deluxe Flower Shaping paper, color them with the Cactus Flower and Leaf Green inks. Then diecut with coordinating die and shape with coordinating mold. Stamp blossoms from the Curvy Floral Frame Cling Stamp Set in Sunflower ink onto Deluxe Flower Shaping paper. Color them with the same ink and shape with Deluxe Flower Shaping Tools. Add some Rock Candy Small Stamens to centers of flowers. Stamp blossoms from Lush Lilac Stamp Set in Sunflower ink onto Deluxe Flower Shaping paper and diecut with coordinating die. Shape them with Deluxe Flower Shaping tools and add some Ribbit Prills.

Stamp 3 branches from Leafy Accents Cling Stamp Set in Leaf Green ink, color them, cut out with coordinating die and shape with coordinating mold. Use dimensional adhesive and hot glue to attach all elements onto card as pictured.

To add the extra sparkle, use the Dries Clear glue along with Crystal Clear glitter over flowers and dragonflies.

Other Products: Hot glue gun, hot glue, paper trimmer, scissors, die cutting machine, white cardstock, sisal, promarkers

Instructions:

Create base using outside Fancy Classic Rectangle Frame Die, cut two pieces from white cardstock and glue together on the top. Using frame die, cut from gold paper and paper collection, glue together making sure to offset them and place onto card using Foam Strips for dimension. Cut smaller frame from paper collection and gold paper, glue together making sure to offset them and adhere to the front of the shaped card using Adhesive Foam Strips for dimension.

To create Clematis flowers, stamp Clematis Cling Stamp on white paper with Ranger Archival Ink Pad - Majestic Violet and cut using the coordinating dies. You will need 2 petals of each to create flowers. For bigger flower use the biggest stamp, for smaller flower use smaller size stamp. Colour the flower with Ranger Archival Ink Pad - Majestic Violet using a sponge dauber. After colouring, place the flowers into the mold and run through cutting/embossing machine. Pierce the center and glue in some stamens using hot glue gun. Add a little hot glue to the underside of the flower. Add dries clear adhesive around flower stamen and sprinkle Ribbit Prills. Sponge the petals with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp the leaves from the Large Floral Urn Cling Stamp Set on the white paper with Ranger Archival Ink Pad - Leaf Green, cut out with the coordinating die, shade use this same ink and shape. Sponge the leaves with dries clear adhesive and sprinkle with Rajni Chawla's Crystal-Clear glitter.

Stamp dragonfly and floral flowers using Dragonfly Florals Cling Stamp Set stamp on the vellum paper with Emboss – embossing stamp pad - clear and sprinkle gold engrossing powder, heat up to melt using heat gun. Using Decorative Dragonfly Die cut matching die cuts from paper collection and place onto the card using adhesive foam strips.

Stamp sentiment using Special Birthday Sentiments stamp on the front of the card with Emboss – embossing stamp pad - clear and sprinkle gold engrossing powder heat up to melt using heat gun. Arrange flowers and leaves around as shown, using foam adhesive and hot glue.

Other Products: Dimensional adhesive, hot glue, hot glue gun, scissors, paper trimmer, die cutting machine, white cardstock

Instructions:

Card size is 9 x 4”. Score and fold 9 x 8” white cardstock at 4” on the short side to create top fold card base. Cut Luxe Silver Cardstock x2 - 8 7/8 x 3 7/8” and white cardstock x2 – 8 5/8 x 3 5/8”. Using a corner punch, round all of the corners. Stamp one of the white pieces with the sentiment ‘I am so grateful for you’ from the For My Friend Sentiments Cling Stamp set using Picked Raspberry and Wilted Violet inks. Stamp the dragonflies using Picked Raspberry, Salty Ocean, Peacock Feathers and Wilted Violet Distress Oxide Inks. Adhere to silver cardstock and adhere to inside of the card.

Dry emboss the other white cardstock using Anna Griffin Slimline Georgette Lace Embossing Folder, adhere to the silver cardstock and adhere to the card front using dimensional tape. Cut a silver eyelet circle frame using the second largest eyelet die from Decorative Circle Frame Die and the third largest plain die from the Eyelet Circle & Basics Small Die and adhere to the center of the card front using foam strips.

Using the Decorative Dragonfly, Daydream Florals and Dragonfly Florals Cling Stamp sets, stamp on white cardstock using VersaMark, cover with Ranger Superfine Detail Silver Embossing Powder, heat set and diecut using the coordinating dies. Color the florals using daubers and Distress Oxide inks – Picked Raspberry, Peacock Feathers, Salty Ocean, Wilted Violet, Twisted Citron and Mowed Lawn. Leave the dragonflies white. Lightly shape all elements using the Deluxe Flower Shaping kit.

Stamp the dragonflies again on vellum using Frost White ink, cover with WOW Metallic Silver Embossing Glitter. Color the backs using the same inks and diecut using the coordinating dies. Adhere the vellum dragonflies on the white diecut dragonflies by adding glue just to the bodies. You want to keep the wings free. Bend the wings up to give the appearance of flight.

Adhere the flowers and dragonflies as pictured using hot glue, sponge with dries clear adhesive and cover with Rajni’s Crystal Clear glitter.

Add a few color coordinating sequins to the inside and outside of the card.

Other Products: White Cardstock, Diecutting Machine, Misti, Colorbox Frost White Ink, VersaMark, Distress Oxide inks – Picked Raspberry, Peacock Feathers, Salty Ocean, Wilted Violet, Twisted Citron and Mowed Lawn, Ranger Superfine Detail Silver Embossing Powder, WOW Embossing Glitter – Sparkling Snow and Metallic Silver Sparkle, Hot Glue Gun, Sequins, Anna Griffin Slimline Georgette Lace Embossing Folder, Dimensional Foam Tape

Instructions:

Create a 6 x 6" card base with white cardstock. Cut a 5.5 x 5.5" piece of pink paper from the Decorative Dragonfly Paper Collection, distress with Vibrant Violet and adhere.

Cut out the largest Simple Centerpiece Die in teal paper from the paper collection, distress with Teal Blue and adhere with foam tape. Cut out the decorative die in white card stock and adhere. Cut out the center frame in pink designer paper and adhere with foam tape. Cut out the center decorative die in patterned paper and adhere.

Stamp the smaller flowers from the Sweet Pea Cling Stamp Set in Cactus Green, sponge with same and cut out with coordinating dies, sculpt with the 3D Sweet Pea Shaping Mold and add stamen and glitter.

Stamp the Wild Aster Cling Stamp Set in Teal Blue, sponge with the Cactus Flower and Teal Blue, cut out with coordinating dies and sculpt with the 3D Floral Basics Shaping Mold and add glitter.

Stamp the leaves from the Wild Aster Cling Stamp Set in Olive, sponge with Cactus Green, cut out with coordinating dies and sculpt with stylus.

Stamp the sentiment from the Elaborate Birthday Cling Stamp Set on the small die of the Majestic Swirl Frames Die on white card stock, distress with Teal Blue. Cut out the small decorative die in teal designer paper, distress with Teal Blue. Adhere to card with foam tape and adhere the sentiment with foam tape on top, as shown.

Stamp the flowers from the Dragonfly Florals Cling Stamp Set and the large dragonfly from the Decorative Dragonfly Cling Stamp Set in Jet Black, cut out with coordinating dies and color with Zig Markers, sculpt with a stylus and add glitter. Add Glossy Accents to the large dragonfly.

Adhere flowers and images as pictured.

Other Products: White Cardstock, foam tape, Stazon Ink Pad Cactus Green, Glossy Accents

Instructions:

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, florist ribbon, cheesecloth, ribbon, wow embossing powder calypso, royal crush, opaque bright white

Instructions:

From a sheet of Deluxe Flower Shaping Paper, measure and cut a piece 11.5" x 4" in size and fold in half to create a 4 x 5 3/4" card base. From the 8B Floral Banners Paper Collection, cut a strip approximately 5.5" x 2.5" in size and glue on the right side. Cut a thin strip from a sheet of gold cardboard and adhere it next to the patterned paper.

Stamp the images  from the set: HCPC-3984 Daydream Florals - put 2 colors on the stamp in selected places at the same time: Vivid Chartreuse and Vibrant Fuchsia and HCPC-3985 Dragonfly Florals - use the Pebble Beach color. Also stamp 2x selected images from HCPC-3983 Decorative Dragonfly set using Pebble Beach color. Cut with matching dies.

Create a layered floral composition as shown, glue together at the bottom and place in the center.

Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments set on the white cardstock using the Vivid Chartreuse color. Trim to size approx 1.75" x 3.5". From the Luxe Gold cardstock, cut a slightly larger piece than the sentiment piece and put them together.  Adhere this using the round 3D cubes at the bottom as shown. Adhere one small dragonfly on the side of thesentiment, the other on the 3D cube above on the floral composition.

Decorate the dragonflies and the top corner with golden Nuvo drops. And it's ready.

Other Products: Cutting machine, paper trimmer

Instructions:

On a 7 x 7” card blank cover with Decorative Dragonfly Paper sheet 10B edged in Deep Purple and mat onto this 4B edged in Vivid Chartreuse. Die-cut 4 Eyelet Oval in Decorative Dragonfly 11B edged in Pink Peony. Die-cut 4 Simply Classic Oval in Decorative Dragonfly 4B edged in Deep Purple. Curl each oval and adhere the ends together. Adhere each smaller folded oval onto the Eyelet Oval. Adhere the 4 pieces together onto the card blank with dots at the centre of each. Die-cut 4no. Arrows and Banner mat and layer Decorative Dragonfly 10B edged in Deep Purple onto 6B edged in Olive. Tuck under each bow and adhere with hot glue. Add a foam dot near the V of the ribbon to lift the ends.

Die-cut Album Tags and Accents in white cardstock and Decorative Dragonfly 9A edged in Deep Purple, adhere over the bow with dots at the points, depending on the dimension of the bow you may need to stack 2 or 3 dots.

Stamp Decorative Dragonflies onto white cardstock with Versacolor pigment ink and white heat emboss, colour with Distress: Tumbled Glass and edge with Deep Purple, die-cut with co-ordinating die. Stamp Versacolor and Tinsel Bridal heat emboss on vellum, die-cut and adhere over coloured dragonfly. Adhere Dragonflies to the card and suspend one off the card with a clear cardstock strip.

Stamp in Versacolor and white heat emboss Daydream Florals and Dragonfly Florals, colour with Zig Clean Colour and water pen, die-cut and adhere cluster together. Adhere to the centre of the card on dots.

Other Products: Paper trimmer, scissors, Distress ink: Tumbled Glass

Instructions:

You can see a video tutorial of this card HERE and the Sweet Pea flower tutorial HERE.

Cut the bottom right corner of sheet 5A from Sweet Pea paper collection to 4" x 5 1/4" and die cut the center using the die from Flourish Companion Frame die. Flip one of the pieces and then adhere both the pieces on a 4 1/4" x 5 1/2" white cardbase as shown. Die cut a piece of white cardstock using the dies from the same die set and adhere them on the card as shown.

Stamp the leaves from Holly Berry Spray Cling Stamp Set on a piece of Deluxe Flower Shaping Paper with Olive Archival ink. Ink it lightly with Leaf Green Archival ink. Die cut these with the matching die from Holly Berry Spray Die. Arrange and adhere all the flowers and leaves as shown.

Stamp the butterflies from Large Floral Butterfly Cling Stamp sets on a piece of vellum using Versamark Ink and heat emboss using WOW White embossing powder and WOW heat gun. Die cut them using matching dies from Large Floral Butterfly. Adhere them on the card front as shown. Add few rhinestones to the butterflies' body.

Other Products: Hot glue gun, WOW white embossing powder, WOW heat gun, Versamark ink and rhinestones.

Instructions:

Die cut the largest decorative filigree companion die using white card and adhere to a solid white filigree companion die. Adhere to a 7" x 5" white card base.

Die cut the smallest solid companion die using white card and Stamp the sentiment using versamark, cover with gold embossing powder, remove excess and heat to set.

Adhere a white diecut of the smallest decorative companion die and adhere this panel to the card base using foam pads.

Die cut the dragonfly shape using white card and adhere into position on the card base.

Stamp the dragonfly using versamark onto vellum, cover with gold embossing powder, remove excess and heat to set. Die cut and adhere the body only to the white die cut on the card base, allow the wings to be free.

Other Products: White card, foam pads, versamark

Instructions:

Card Size 6” x 6” (on white cardstock, final size). Take pattern paper from the HCDP1-2138 Decorative Dragonfly Paper Collection, and adhere it using designer dries clear adhesive.

Cut one die from HCD2-7400 Classic Companion Border Die on white cardstock and adhere it using designer dries clear adhesive, as shown.

Cut two layers of die on white cardstock from HCD2-7306 Decorative Circles Frames Die and adhere it using foam tape. Add Sentiment from HCPC-3846 Thank You Sentiments Cling Stamp Set using archival ink- Leaf Green. Sprinkle some gold color using brush.

Stamp some flower images from HCPC-3985 Dragonfly Florals Cling Stamp set using distress ink-Seedless Preserves, Dusty Concord, Forest Moss, Peeled paint, and giving water color effect, cut  with coordinating die and adhere using foam tape and designer dries clear adhesive.

Stamp some dragonfly images on vellum from HCPC-3983 Decorative Dragonfly Cling Stamp Set and HCPC-3985 Dragonfly Florals Cling Stamp using versamark ink and sprinkle gold embossing powder and heat it. Cut with coordinating dies. Cut from same die on gold cardstock, adhere both layers togther and adhere to card front as shown.

Other Products: White cardstock, Distress Ink-Seedless Preserves, Dusty Concord, Forest Moss, Peeled paint, Big-Shot Plus Machine.

Instructions:

This card when completed measures 6“ x 6“. Taking the white card stock, make a tent fold card to the above measurements. Using the sheet number 2B from the paper pad, cut a matting that is a little smaller than the card front. Adhere this to the card front. Flip the sheet over to the 2A then cut out the pink print for the card front. Taking the green card stock and the outer die from the Stairway Gardens die, die cut a frame to fit the pink paper. You do this by letting the die you don’t want to cut hang over or out from the cutting plates so the die cutting  machine does not cut the full die frame. Adhere this all to the left of the card front by using the 3D tape or 3D foam dots/tape.

Taking the green card stock and the Album Tags & Accents die set die cut the outer frame as shown. Using white card stock, the sepia ink and the Elegant Gateway Sentiments stamp used, stamp the image twice. Die cut one of the sentiments with the inner frame die, the remaining sentiment, fussy cut the banner. Use the aqua pencils and the water pen brush to bring color to the sentiment elements. The colors used are: Sherbet Lemon 0100, Hot Red 0410, Field Green 1500, Teal Green 1300. Adhere the banner in place then the sentiment frame to the outer frame. Adhere all to the card front to the right.

To make the dragonflies, take the Decorative Dragonfly stamp and matching dies, the versamark and gold embossing powder. Make  two layers for each dragonfly. Make three sets. Bring color to the dragonflies by using the aqua pencils, Hot Red 0410, Field Green 1500 and Teal Green 1300. Use the shaping tools to bring shape to the wings. Adhere in place. Apply the stickles to the wings and make a glitter trail for each dragonfly. Last apply the stickles to the sentiment.

Other Products: Derwent Aqua Pencils: Sherbet Lemon 0100, Hot Red 0410, Field Green 1500, Teal Green 1300. Diamond stickles, VersaMark, Fussy cutting scissors, Hot glue gun, Misti stamping tool, Double sided tape, Double sided 3D foam tape, Green card stock, Ruler.

Instructions:

Cut out the white base of the card and fold it to 4" x 7 3/4". From the paper collection, cut a slightly smaller rectangle and glue to the base. From gold paper, cut a 3 1/4 "x 7" rectangle, then from the paper collection cut a slightly smaller rectangle, round the opposite corners with rounder on both rectangles and glue them. Stamp the sentiment with black ink.

From the gold paper, cut a frame from the Royal Elegance Frames  Die set and adhere to the base as shown. Adhere it on a card using foam dots.

To make a dragonfly, stamp the dragonfly from the Decorative Florals set on white paper with Archival Cornflower Blue ink and color it with Archival French Ultramarine . Cut with the coordinating die.

Adhere everything as shown. 

Other Products: Rounder, Big-Shot Machine

Instructions:

The card base is 5 x 7" in white cardstock. Cut a piece of the blue patterned paper that is 4.75 x 6.75", and distress the egdes. Adhere to the white cardstock base. Find and cut out the mini journal block and stamp the "Congratulations" using black ink (Staz On- Jet Black). Set aside for now.

Using the Elaborate Oval dies, cut the largest piece from Luxe Gold Cardstock, then next smaller layer from white cardstock. The next layer is cut from dark teal patterned paper, and the smallest layer is from white cardstock. Adhere the 3 larger pieces together, and adhere to the card base using foam tape. Adhere the smallest die cut layer to the card base using foam squares. Add the sentiment block to the bottom of the card using Thin 3D Foam Squares. Add gems to the large die cut piece.

Stamp the dragonfly image onto Vellum Flowerite using an embossing pad and white embossing powder. Die cut pout and die cut a second image from Luxe Gold Cardstock. Adhere the layers together using adhesive dots and slightly offset. Adhere to the middle of the card using foam squares. Add gems up the body of the dragonfly.

Other Products: Cardstock- White, Paper Distresser, Gems, Embossing Pad, White Embossing Powder, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Adhesive Dots Micro, Thin 3D Foam Squares, 3D Foam Squares)

Instructions:

It is a ready folding card measuring 8 3/4 x 6 inches, trim panel on gray glitter cardstock measuring 8 1/2 x 5 3/4 inches and adhere on the card base using dimensional tape.

Trim another panel on black cardstock measuring 8 1/4 x 5 1/2 inches and adhere on the card base using clear glue. Stamp the images from Decorative Dragonfly Stamp Set, Dragonfly Florals Stamp Set, Daydream Florals Stamp Set and from Special Birthday Sentiments stamp set on the panel using versamark embossing ink as shown, cover with embossing powder and heat it using heat tool, adhere this panel on the card base using clear glue.

Stamp the Big Dragonfly image on the black card and vellum paper from Decorative Dragonfly Stamp Set using versamark ink cover with embossing powder and heat it using heat tool diecut using coordinating die and arrange on the dragon image using hot glue.

Embellish the card using Rhinestones and black nuvo drops.

Other Products: Gray Glitter Cardstock, Black Nuvo Drops, Dimensional Tape, Tinsel Glitter Powder, Black Cardstock, Vellum Paper, Rhinestones.

Instructions:

On a 5 x 7” card blank cover with Decorative Dragonfly Paper 2B edged with Vivid Chartreuse. Cut cardboard from disgarded packaging 4 x 6” spritz on one side with water and allow to soak in then the paper covering will easily be removed. Add Texture paste to the cardboard and allow to dry. Cut vellum 4 3/4 x 6 3/4” mat and layer onto the card blank.

Die-cut multiple white cardstock Royal Elegance Frames and adhere together to give a solid frame and adhere onto the cardboard with foam strips.

Stamp versacolor white pigment ink Decorative Dragonfly onto white cardstock, white heat emboss, stamp again onto vellum heat emboss Tinsel Bridal, die-cut with coordinating die. Colour with Sunflower, Bright Tangelo and Carnation Red, adhere vellum over and add pearls.

Stamp Leafy Accents onto Deluxe Flower Shaping Paper, colour with Vivid Chartreuse and Leaf Green. Die-cut and run through in 3D Leafy Accents mold.

Onto Deluxe Flower Shaping Paper stamp Wild Rose in Carnation Red and colour with same, stamp the leaves in Leaf Green and colour with Vivid Chartreuse, Leaf Green and Carnation Red. Die-cut and run through in the 3D Shaping Mold. Adhere 2 petals together with Dries Clear, add glue to the centre and prills Bright Ideas.

Stamp Rustic Sunflower onto Deluxe Flower Shaping Paper in Monarch Orange and Sunflower and colour with Bright Tangelo and Buttercup. Die-cut and run through in the co-ordination mold. Adhere 2 petals together with Dries Clear add glue to the centre and add Redland Elements.

Stamp onto white cardstock in Carnation Red ‘To Encourage You’ from the Elaborate Birthday Cling Stamp, die cut with Ornamental Tags, adhere onto the frame overhanging.

Add Dries Clear and Crystal Clear glitter to the flowers and leaves. Add additional pearls onto the card with hot glue.

Other Products: Paper trimmer, scissors, pearls, hot glue